Bestselling Products

338 products


  • RETEVIS TCK01 Kenwood 2 Pin to 3.5mm Female Mobile Phone Audio Earphone Transfer?Cable for RT21/RT22/RT24/RT7/RT27/H777-garmade.com

    RETEVIS TCK01 Kenwood 2 Pin to 3.5mm Female Mobile Phone Audio Earphone Transfer?Cable for RT21/RT22/RT24/RT7/RT27/H777

    1. If the transmission power of a walkie-talkie with a power exceeding 2W is too large, the signal is too strong, which will interfere with the PCB board of the patch cord, and the transmission signal cannot be turned off.2. The patch cord stability test is only applicable to Retevis: RT21, RT22, RT24, RT7, RT27, H7773. Good quality and long service life4. Cable length: 145mm5. Weight: 10 gramsUsage and precautions:1. Insert the plug of the adapter cable into the earphone jack of the walkie-talkie;2. Insert the earphone into the earphone jack of the adapter cable to turn on the intercom;3. Press the call button on the headset, the PTT light on the walkie-talkie lights up, and you can use the MIC on the headset to speak;4. Long press the button on the headset (more than 0.5S), the PTT light on the walkie-talkie turns off, and the walkie-talkie is in standby mode;5. When using the headset to call, pay attention to turn off the transmitter in time after the call is completed;6. Avoid using walkie-talkies with high power and too strong signal, so as not to affect the normal use of the product;7. After turning on the voice control of the walkie-talkie, the voice control sensitivity of the mobile phone headset is extremely low, and the voice control function cannot be used normally.

    €9,92

  • DC 3V-6V 400KV Boost Step Up Power Module High Voltage Generator-garmade.com

    DC 3V-6V 400KV Boost Step Up Power Module High Voltage Generator

    Type:Voltage Regulator1. Power: Standard2. Number of pins: Standard3. Use: Standard4. Package: High voltage generator5. Standard: Application Area 3C Digital6. Input voltage: DC 3V-7.2V7. Input current: 2A-5A8. High voltage type: Pulse current type9. Output voltage: About 200,000 volts (please pay attention to safety when using)10. High voltage two pole discharge distance: 10mm-20mm11. Output high voltage line length: About 100mm12. Input power cord length: About 100mm (red line is positive)13. Dimensions: D 24*64mm

    €4,52

  • Universal Bluetooth Speaker Charging Base Stand for BOSE SoundLink Revolve / Revolve+(Black)-garmade.com

    Universal Bluetooth Speaker Charging Base Stand for BOSE SoundLink Revolve / Revolve+(Black)

    1. Thin and light design, stylish and beautiful2. Easy to carry3. Good quality and long service life4. Suitable for BOSE SoundLink Revolve / Revolve+5. Size: 105.3x105.3x15.7mm

    €10,60

  • 30cm Power Cable for DJI FPV Goggles V2-garmade.com

    30cm Power Cable for DJI FPV Goggles V2

    1. Strong and not broken, the thread body is made of high-quality PVC material, which is more resistant to wear 2. With it, you can avoid the problem that the glasses keep restarting due to insufficient voltage 3. It can be connected to a mobile power supply to solve the problem of fast battery consumption of FPV goggles. 4. The interface is made of tin-plated material, which effectively avoids oxidation and rust, and is safer. 5. Small size, light weight, easy to carry

    €10,78

  • RCSTQ Two-color Retractable Thumb Rocker Joystick for DJI FPV Combo Drone Remote Control-garmade.com

    RCSTQ Two-color Retractable Thumb Rocker Joystick for DJI FPV Combo Drone Remote Control

    1. Aluminum alloy material, sturdy and durable 2. Process: Anodizing and coloring process to use 3. Ergonomic design, knurled anti-slip, comfortable 4. Stored in the remote control like the original joystick 5. Design for DJI FPV, quick disassembly and easy installation 6. Size: 2.4x0.9x0.9cm 7. Weight: 4.7g

    €12,88

  • STARTRC Camera Mount Fixed Shock Absorber for DJI Mavic 2 / Insta360 ONE X-garmade.com

    STARTRC Camera Mount Fixed Shock Absorber for DJI Mavic 2 / Insta360 ONE X

    1. Suitable for Mavic2/Insta360 ONE X/GoPro 2. Size: 9.3x8.5cm

    €12,46

  • 30cm Micro USB to USB-C / Type-C Converting Data Cable Connector for DJI MAVIC PRO & SPARK Remote Controller, Smartphones, Tablets-garmade.com

    30cm Micro USB to USB-C / Type-C Converting Data Cable Connector for DJI MAVIC PRO & SPARK Remote Controller, Smartphones, Tablets

    1. Data cable for DJI SPARK/ MAVIC PRO 2. Directly connect to smartphones / tablets 3. Net weight: 7g 4. Cable length: about 30cm

    €5,44

  • Support Base Data Interface Protective Cover for DJI OSMO Pocket-garmade.com

    Support Base Data Interface Protective Cover for DJI OSMO Pocket

    1. Protect the exposed corrosion damage of data points. 2. Easy installation, convenient and quick. 3. 1:1 true machine mold, accurate fitting data interface.

    €4,80

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Black)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Black)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €5,00

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Black)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Black)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €5,00

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm Black+Color Light+RC(UK Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm Black+Color Light+RC(UK Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €101,18

  • 4 Pairs Noise Cancelling Heel Covers Anti-Slip High Heels Protective Caps, Size:XS(Brown)-garmade.com

    4 Pairs Noise Cancelling Heel Covers Anti-Slip High Heels Protective Caps, Size:XS(Brown)

    1. Non-slip and wear-resistant, comfortable and secure2. PVC plastic, bright color, firm and wear-resistant3. Anti-slip design at the bottom, stable walking4. Material: PVC5. Size: XS/S/M/L6. Weight: XS about 3 grams, S about 3.6 grams, M about 4.2 grams, L about 5.5 grams

    €4,44

  • 4 Pairs Noise Cancelling Heel Covers Anti-Slip High Heels Protective Caps, Size:L(Transparent)-garmade.com

    4 Pairs Noise Cancelling Heel Covers Anti-Slip High Heels Protective Caps, Size:L(Transparent)

    1. Non-slip and wear-resistant, comfortable and secure2. PVC plastic, bright color, firm and wear-resistant3. Anti-slip design at the bottom, stable walking4. Material: PVC5. Size: XS/S/M/L6. Weight: XS about 3 grams, S about 3.6 grams, M about 4.2 grams, L about 5.5 grams

    €4,44

  • Aluminum Alloy Hot Shoe Tripod Heads, 1/4 inch Male Screw Adapter-garmade.com

    Aluminum Alloy Hot Shoe Tripod Heads, 1/4 inch Male Screw Adapter

    1. Material: Aluminum alloy + soft wooden 2. Hot shoe to 1/4 inch male screw adapter 3. Allows any angle adjustment with ball head 4. Height: 6cm 5. Perfect for LCD monitor, LED light, microphone, etc

    €4,78

  • Hot Shoe Handle for Fuji X-E1(Silver)-garmade.com

    Hot Shoe Handle for Fuji X-E1(Silver)

    1) This product is designed to provide a secure grip and maintenance of all the normal features and functions of the camera. 2) A force point the finger grips principle is added to the camera, is tantamount to pull the camera with the thumb, and thus play a role to enhance grip stability 3) The project to improve the grip of the camera, portrait, landscape position, directly control wheel thumb. 4) This version has an exact match with the XE1, plug to plug prison, seamless, the gripping feeling very full, any button on the machine body can be said that black Washing as well as any of the original operation did not block the interference 5) Small and light, so it does not embed the belt or clothing, ergonomic shape provide more grip inadequate efforts 6) Material: metal

    €14,92

  • Suitable For Nikon AF-S 80-200mm F / 2.8D ED Small Steel Cannon Tripod Ring-garmade.com

    Suitable For Nikon AF-S 80-200mm F / 2.8D ED Small Steel Cannon Tripod Ring

    Description:1. Material: aluminum alloy2. Size: 81mm inside diameter3. Color: black4. Production process: mechanical finishing, surface frosted and electroplated, hardened, and then baked with black paint, shiny. Flocking inside, will not scratch the lens body.5. Purpose: fix the lens on a tripod, which can be easily rotated in all directions to meet the shooting needs.

    €12,18

  • 3PCS Professional Tripod Stainless Steel Foot Spikes-garmade.com

    3PCS Professional Tripod Stainless Steel Foot Spikes

    1. The bottom plate and the side plate have more screw holes, which can expand more functions and reduce the weight, and can be retracted (do not unscrew the screw, loosen the screw to adjust the length), vertical shot does not affect the insertion of the data cable, more Convenience.2. Using aviation aluminum material, CNC precision machining, hollow reinforcement treatment, surface anode oxidation treatment, handle and quick release plate can be removed, all stainless steel screws are easy to maintain, specially designed for xpro3, personal safety protection; shoulder strap can be installed on the side .3. Newly added bottom AS interface quick mounting plate and side AS interface quick mounting plate, compatible with AS interface gimbals such as IS-QJ64 / IS-JZ50, adding horizontal shooting and vertical shooting functions; does not affect the disassembly and assembly of batteries, does not affect the screen Flip.4. Adopt RRS standard interface

    €35,00

  • FITTEST GXF-50R Metal Thumb Grip Griping Camera Handling for Fujifilm GXF-50R-garmade.com

    FITTEST GXF-50R Metal Thumb Grip Griping Camera Handling for Fujifilm GXF-50R

    1. Removable, easy to install, aluminum alloy, one-piece body design, CNC machining, surface anode anti-oxidation treatment. 2. Ergonomic design, increase the comfort of your fingers, light and practical. 3. Compatible with Fuji GXF-50R camera, provided your camera has hot shoes.

    €17,74

  • RCSTQ Thick Anti-lost Anti-fall Neck Strap Holder Lanyard for DJI FPV Remote Control-garmade.com

    RCSTQ Thick Anti-lost Anti-fall Neck Strap Holder Lanyard for DJI FPV Remote Control

    1. It adopts nylon and mesh cloth material, which is not easy to draw, and feels good 2. It can be stored when not in use, easy to carry 3. Length adjustment buckle, adjustable length, 61.5-81cm can change as you like 4. Metal hanging buckle, strong, stable and safe 5. Lightweight and portable, easy to carry 6. Weight: 65.2g

    €11,44

  • STARTRC For DJI FPV Goggles Type-C / USB-C to Type-C / USB-C Elbow Dual-way Transmission Data Cable, Length: 1.2m(Black)-garmade.com

    STARTRC For DJI FPV Goggles Type-C / USB-C to Type-C / USB-C Elbow Dual-way Transmission Data Cable, Length: 1.2m(Black)

    1. Nylon material, flexible and durable 2. 90 degree design, easy to use 3. The line is 1.2 meters long, which can meet the needs of different scenarios 4. Aluminum alloy metal shell + environmentally friendly PVC, film forming process, flexible inside and rigid outside, not easy to break 5. Connect directly to your phone for easy viewing of live images, convenient

    €8,14

  • RCSTQTablet PC Extension Holder Clamp for AUTEL EVO 2 II Remote Control-garmade.com

    RCSTQTablet PC Extension Holder Clamp for AUTEL EVO 2 II Remote Control

    1. Material: 3D printing2. Dimensions: 70 x 35 x 13 mm3. Applicable to: For AUTOEL EVO Ⅱ4. Net weight: 14 g5. Total weight: 21.3 g (including packaging)6. Control method: Remote control7. Applicable to 7.9 inch screen, not applicable to 9.7/10.2/10.5 inch screen8. Note: The product only includes flat extension clips, not others

    €9,22

  • 2 PCS Sunnylife AIR-YG9101 For DJI Mavic Mini / Mavic 2 / Mavic Air Aluminum Alloy Joystick Thumb Rocker(Red)-garmade.com

    2 PCS Sunnylife AIR-YG9101 For DJI Mavic Mini / Mavic 2 / Mavic Air Aluminum Alloy Joystick Thumb Rocker(Red)

    1. Material: CNC aviation aluminum alloy material2. Process: Anodizing and coloring process3. Weight: 4g/pair4. Knurled anti-slip design for stable holding5. Stored in the remote control like the original joystick6. Applicable models: Suitable for DJI Mavic Mini / DJI Mavic 2 / DJI Mavic Air

    €8,44

  • Sunnylife AIR2-Q9294 Remote Control Hanging Buckle Bracket Lanyard for DJI Mavic Air 2-garmade.com

    Sunnylife AIR2-Q9294 Remote Control Hanging Buckle Bracket Lanyard for DJI Mavic Air 2

    1. For DJI Mavic Air 2. 2. Easily use the lanyard to free your hands. 3. Solved the problem that the remote control can not directly use the lanyard without the lanyard hole. 4. Will not block the screen of the mobile phone, and will not affect the operation of the remote control. 5. Simple operation and easy installation.

    €8,14

  • 4 PCS Sunnylife Motor Metal Protection Cover for DJI Mini 2 (Red)-garmade.com

    4 PCS Sunnylife Motor Metal Protection Cover for DJI Mini 2 (Red)

    1. No need to dismount the cover when disassembling propellers whole time protection for the motor,precision screws fixing closely fit motors good covering on the motor. 2. Aluminum alloy material and CNC finishing:Light weight, durable and scratch-proof. 3. Effectively prevent propellers, scratching drone body. 4. Convenient usage, once for all, no need to dismount the covers after finishing mounting 5. Compatible with DJI Mini 2

    €13,42

  • STARTRC Owl Night Flight Lamp Searchlight Light Signal Light for DJI Mavic 2 / Air 2S / Mini 2 / Mini / FPV (Black)-garmade.com

    STARTRC Owl Night Flight Lamp Searchlight Light Signal Light for DJI Mavic 2 / Air 2S / Mini 2 / Mini / FPV (Black)

    Features1. Four mode changes to meet the needs of different scenarios 2. Multifunctional expansion: it can be combined with other accessories with adapters, 1/4 screws, and fixing frames. 3. Built-in rechargeable battery, rechargeable, the battery is durable 4. The bottom heat dissipation hole design, stable heat dissipation, worry-free flying for a long time 5. Lightweight and compact, the net weight is only 50g, does not increase the load of the fuselage, and does not affect the flightPackage List1. Searchlight body x 1 2. Manual x 1 3. Adapter x 1 4. Screw M5 x 1 5. Gasket x 2 6. Android data cable x 1 7. 1/4 screw x 1

    €31,28

  • 2 PCS LDTR-WG0210 TJA1050 CAN Controller Interface Module BUS Driver Interface Module (Blue)-garmade.com

    2 PCS LDTR-WG0210 TJA1050 CAN Controller Interface Module BUS Driver Interface Module (Blue)

    Description1. Onboard TJA1050 CAN controller interface chip2. Chip commonly used pin has led, convenient connection to use3. Pin 5v to power supply4. PCB board size: 22 (mm) x11.5 (mm)Specification1. Brand: Landa tianrui2. Model: LDTR-WG02103. Quantity: 1 piece4. Color: Blue5. Material: PCB6. Chipset: TJA10507. Dimensions: 2.2 cm x 1.2 cm x 0.5 cm8. Weigh: 5g9. Package List: 2 x TJA1050 CAN Controller Interface Module

    €4,96

  • LDTR-WG0257 Dual USB 9V/12V/24V/36V to 5V Converter DC-DC 3A Step Down Power Module (Red)-garmade.com

    LDTR-WG0257 Dual USB 9V/12V/24V/36V to 5V Converter DC-DC 3A Step Down Power Module (Red)

    1. Input: 9V-36V2. Output: 5V / 3A (MAX)3. Efficiency: 92% (MAX)4. Switching frequency: 150KHZ5. Operating temperature: -40 degree C - + 85 degree C 6. Load capacity: Maximum output 3A (at the same time with two mobile phones)7. Application: mobile power, mobile phones, flat-panel USB5V powered devices8. Model: LDTR-WG02579. Material: PCB + Electronic Components10. Weight: 27g 11. Size: 7cm x 2.2cm x 2.5cm12. Package included: 1 x DC Power Module

    €4,04

  • LDTR-WG0265 DC 6A Motor Speed Governor Slow Down Motor Controller Positive And Negative Rotating Control Switch 12V/24V/36V/48V (Black)-garmade.com

    LDTR-WG0265 DC 6A Motor Speed Governor Slow Down Motor Controller Positive And Negative Rotating Control Switch 12V/24V/36V/48V (Black)

    Features1. Input voltage range: DC 10V-60V2. Rated current: continuous operating current within 6A3. Function: control DC brush motor speed, forward, stop, reverse4. Installation method: panel type, and wiring according to wiring diagram5. Brand: Landa tianrui6. Model: LDTR-WG02657. Material: FR-48. Dimensions: 9.8 cm * 9.1cm* 6cm9. Weight: 124 g10. Package Included: 1 x Motor Speed ControllerNote1. The input of the DC motor governor is DC, and it cannot be directly connected to AC (for example, household 220V AC), otherwise it will burn out.2. The positive and negative poles of the DC power cannot be reversed, otherwise the governor will be bad.3. The motor is not divided into positive and negative. When the running direction is inconsistent with the expectation, the direction can be changed by adjusting the line sequence.4. The potentiometer knob can change the governor output duty cycle, thus changing the motor speed.

    €9,40

  • ZK-502L Bluetooth 5.0 12/24V Wireless Stereo Audio Digital Power Amplifier Board 50Wx2 Bluetooth Amp Amplificador, without Shell-garmade.com

    ZK-502L Bluetooth 5.0 12/24V Wireless Stereo Audio Digital Power Amplifier Board 50Wx2 Bluetooth Amp Amplificador, without Shell

    Features1. The potentiometer adjusts the volume with a switch for easy control of the volume, making it good for DIY speakers.If it is a metal box, you need to bring out the Bluetooth antenna. 2. The copper DC connector is used to withstand high current and no heat. 3. Capacitor 470uf35V solid capacitors ensure power storage and heat dissipation, and stable power supply is a prerequisite for good sound quality. 4. Free DC head lead, compatible with the input power interface of this product, even if you do not have a DC head adapter or battery, it can be easily wired. 5. Bluetooth 5.0 version, the transmission efficiency is higher, the transmission distance is farther. Precautions for use: The power switch on the board is the standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug the DC plug on the machine for a long time.Specification1. Material: ABS plastic 2. Bluetooth version: 5.0 3. Adaptation supply voltage: 5-24V(optional 9/12/15/18/24V adapter, high power recommended high voltage) 4. Adapter speaker: 30-200W, 4 ohms???8 ohms 5. Number of channels: Left and right stereo(stereo) 6. Bluetooth transmission distance: 15m(without occlusion) 7. Protection mechanism: Self-recovery overheat protection, self-recovery short circuit protection 8. Size: 55 x 38 x 17mm Tip: To have enough out put power if the input is sufficient and the supply voltage/current is sufficient. The power supply voltage is higher and the relative power will be larger. The speakers with different impedances will have different output power. In the case of sufficient voltage and current, the larger the ohms of the horn, the smaller the relative sound powre. Please pay attention! Power supply voltage: 12V--8 ohm speaker/12W(left channel) + 12W(right channel), 4 ohm speaker/20W + 20W 15V--8 ohms/18 + 18W, 4 ohms/greater than 30 + 30W 19V--8 ohms/32 + 32W, 4 ohms/greater than 45 + 45W 24V--8 ohms/38 + 38W, 4 ohms/greater than 50 + 50W

    €8,80

  • ZK-502L Bluetooth 5.0 12/24V Wireless Stereo Audio Digital Power Amplifier Board 50Wx2 Bluetooth Amp Amplificador, with Shell-garmade.com

    ZK-502L Bluetooth 5.0 12/24V Wireless Stereo Audio Digital Power Amplifier Board 50Wx2 Bluetooth Amp Amplificador, with Shell

    Features1. The potentiometer adjusts the volume with a switch for easy control of the volume, making it good for DIY speakers.If it is a metal box, you need to bring out the Bluetooth antenna. 2. The copper DC connector is used to withstand high current and no heat. 3. Capacitor 470uf35V solid capacitors ensure power storage and heat dissipation, and stable power supply is a prerequisite for good sound quality. 4. Free DC head lead, compatible with the input power interface of this product, even if you do not have a DC head adapter or battery, it can be easily wired. 5. Bluetooth 5.0 version, the transmission efficiency is higher, the transmission distance is farther. Precautions for use: The power switch on the board is the standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug the DC plug on the machine for a long time.Specification1. Material: ABS plastic 2. Bluetooth version: 5.0 3. Adaptation supply voltage: 5-24V(optional 9/12/15/18/24V adapter, high power recommended high voltage) 4. Adapter speaker: 30-200W, 4 ohms - 8 ohms 5. Number of channels: Left and right stereo(stereo) 6. Bluetooth transmission distance: 15m(without occlusion) 7. Protection mechanism: Self-recovery overheat protection, self-recovery short circuit protection 8. Size: 55 x 38 x 17mm Tip: To have enough out put power if the input is sufficient and the supply voltage/current is sufficient. The power supply voltage is higher and the relative power will be larger. The speakers with different impedances will have different output power. In the case of sufficient voltage and current, the larger the ohms of the horn, the smaller the relative sound powre. Please pay attention! Power supply voltage: 12V--8 ohm speaker/12W(left channel) + 12W(right channel), 4 ohm speaker/20W + 20W 15V--8 ohms/18 + 18W, 4 ohms/greater than 30 + 30W 19V--8 ohms/32 + 32W, 4 ohms/greater than 45 + 45W 24V--8 ohms/38 + 38W, 4 ohms/greater than 50 + 50W

    €9,64

  • Belt Clip for Walkie Talkie(Black)-garmade.com

    Belt Clip for Walkie Talkie(Black)

    About the product1. Brand new and high quality 2. Durability 3. Compact, easy to install

    €3,42

  • SF401 Plus Portable Handheld Frequency Counter for Walkie Talkie, Frequency: 27MHz-3000MHz-garmade.com

    SF401 Plus Portable Handheld Frequency Counter for Walkie Talkie, Frequency: 27MHz-3000MHz

    1. The frequency meter capable of measuring the parameters of the frequency of the continuous carrier signal walkie-talkies, with signal strength indicator. 2. This portable frequency counter is designed for counting continuous wave signal comes from two-way radio. 3. There are easy ranges for you to choose. The ranges cover most of the frequency of the two way radios you want to measure. 4. 4 buttons for all function control, its four-button control is easy to use and its small size allows you to carry it anywhere you like. 5. Work by TCXO (crystal) Osc.2~2.5ppm. 6. Use for VHF/UHF walkie-talkies. 7. Auto power off 1-9 minutes. 8. Frequency response time: 0.2-0.5s (CTCSS/CDCSS>0.5-1s). 9. 240*320 pixel color LCD. 10. Digital select digi0.000 or 0.0000. 11. Frequency range: 27MHz-3000MHz (Note: 27-100MHz, it can not be guaranteed and the corresponding normal emission appliance)

    €85,28

  • RETEVIS PC28 FTDI Chip USB Programming Cable Write Frequency Line-garmade.com

    RETEVIS PC28 FTDI Chip USB Programming Cable Write Frequency Line

    1. USB programming cable, plug and play.2. FTDI chip, good compatibility, no need to worry about the driver.3. The cable is soft, strong and durable.4. Connector type: Kenwood 2 PIN/standard A4 USB adapter5. Internal integration: FTDI 2326. Material: PU wire, ABS7. Working voltage: DC 5V+/-0.5V8. Support system: WinXP / 7/8/10 Linux / Mac OS X / Android9. Cable length: 92cm10. Suitable for Retevis H777, RT7, RT1, RT21, RT22, RT24, RT23, RT26, RT5, RT5R, RT5RV, RT81; suitable for Kenwood TH TH-D7, TH-D7A, TH-D7AG, TH-D7E, TH -F6, TH-F6A, TH-F7, TH-F7E, TH-G71, TH-G71A, TH-G71E, TH-K2, TH-K2A, TH-K2E, TH-K2ET, TH-21; suitable for Kenwood KPG KPG27D, KPG29D, KPG48D, KPG49, KPG55D, KPG56D, KPG62D, KPG66D; suitable for BAOFENG UV5R, UV5RA, UV5RE, UV5REPlus, UVB6, UVB5, UV-8, UV-8D, etc.

    €26,82

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Yellow)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Yellow)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €4,98

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(White)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(White)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €5,00

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Yellow)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Yellow)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €4,98

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(White)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(White)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €5,00

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Grey)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: L(Grey)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €4,98

  • 2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Grey)-garmade.com

    2 PCS Sneakers Shield Anti-crease Anti-wrinkle Shoe Support, Size: S(Grey)

    1. Material: TPR2. Good resilience and abrasion resistance3. Not easy to deform, not easy to wrinkle4. Can be freely cut according to the required size5. Ventilation hole design to keep the inside of the shoe dry6. Suitable season: summer, winter, spring7. Size: S (35-40 yards), L (40-45 yards)8. Weight: S32g, L33gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 20cm * 15cm * 6cm / 7.87inch * 5.91inch * 2.36inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 404 pcs = 71508 pcs 40HQ: 412 cartons * 404 pcs = 166448 pcs

    €4,98

  • High Heels Heel Studs Mute Wear-resistant Replacement Heel, Color: Black (30 In 1)-garmade.com

    High Heels Heel Studs Mute Wear-resistant Replacement Heel, Color: Black (30 In 1)

    1. Material: TPU2. Specifications: 30 in 13. Has good elasticity4. Suitable for many styles of high heels5. Not easy to break, not easy to crack, more secure to use6. Wear resistance, cold resistance, oil resistance, wide range of hardness7. It can stabilize the heel and add a touch of color8. Size: U shape: 0.9x0.9, 1x0.9, 1x1.1, 1.25x1.05, round: diameter 1cm9. Unit weight: 91g/setSpecification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 10cm * 10cm * 3cm / 3.94inch * 3.94inch * 1.18inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

    €8,04

  • LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm Black+White Light(UK Plug)-garmade.com

    LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm Black+White Light(UK Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 42 x 7cm10. Weight: about 4500g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 4.50kgs / 9.93lb One Package Size 50cm * 50cm * 14cm / 19.69inch * 19.69inch * 5.51inch Qty per Carton 3 Carton Weight 15.00kgs / 33.07lb Carton Size 53cm * 53cm * 46cm / 20.87inch * 20.87inch * 18.11inch Loading Container 20GP: 206 cartons * 3 pcs = 618 pcs 40HQ: 479 cartons * 3 pcs = 1437 pcs

    €160,46

  • LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(UK Plug)-garmade.com

    LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(UK Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 42 x 7cm10. Weight: about 4500g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 4.50kgs / 9.93lb One Package Size 50cm * 50cm * 14cm / 19.69inch * 19.69inch * 5.51inch Qty per Carton 3 Carton Weight 15.00kgs / 33.07lb Carton Size 53cm * 53cm * 46cm / 20.87inch * 20.87inch * 18.11inch Loading Container 20GP: 206 cartons * 3 pcs = 618 pcs 40HQ: 479 cartons * 3 pcs = 1437 pcs

    €160,46

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm White+White Light(AU Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm White+White Light(AU Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €84,60

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(AU Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(AU Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €98,40

  • LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm Black+Color Light+RC(EU Plug)-garmade.com

    LM-011 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm Black+Color Light+RC(EU Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 42 x 7cm10. Weight: about 4500g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 4.50kgs / 9.93lb One Package Size 50cm * 50cm * 14cm / 19.69inch * 19.69inch * 5.51inch Qty per Carton 3 Carton Weight 15.00kgs / 33.07lb Carton Size 53cm * 53cm * 46cm / 20.87inch * 20.87inch * 18.11inch Loading Container 20GP: 206 cartons * 3 pcs = 618 pcs 40HQ: 479 cartons * 3 pcs = 1437 pcs

    €157,24

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm White+White Light(UK Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:15mm White+White Light(UK Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €84,60

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(UK Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm White+White Light(UK Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €98,40

  • LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm Black+White Light(US Plug)-garmade.com

    LM-001 LED Lighting Magnetic Levitation Shoes Display Stand, Style:28mm Black+White Light(US Plug)

    1. Can be rotated 360 degrees, increasing the display effect2. With LED light, can illuminate the shoes3. Power control switch on the back, easy to operate4. Acrylic material, good texture, lightweight and portable5. Material: acrylic6. Remote control power supply: contains a button battery (white light models do not contain the remote control)7. Suspendable shoes weight: about 200-550g8. Suspension distance: about 15/28mm9. Size: about 44 x 24 x 7cm10. Weight: about 2300g11. Description: only the display frame, not including the shoes in the pictureSpecification: Package Weight One Package Weight 2.30kgs / 5.08lb One Package Size 50cm * 31cm * 13cm / 19.69inch * 12.2inch * 5.12inch Qty per Carton 3 Carton Weight 8.00kgs / 17.64lb Carton Size 55cm * 33cm * 40cm / 21.65inch * 12.99inch * 15.75inch Loading Container 20GP: 367 cartons * 3 pcs = 1101 pcs 40HQ: 852 cartons * 3 pcs = 2556 pcs

    €98,40

Login

Forgot your password?

Don't have an account yet?
Create account