Bicycle Accessories

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

Model Number:hook for xiaomi mijia m365Type:hook for scooterDescirption:Waterproof, not easy to rustLoading 5 kgStrong, stable, not easy to fallEasy to installApplicable to bicycles, electric vehicles, motorcycles, electric scootersSpecification:Material: aluminum alloyColor: red + whiteMaximum load: 5 kgMaximum opening: 2 cmApplicable models: universalOverall size: 5x6cmInner hole size: 2.5x4.5cmApplication:For Xiaomi Mijia M365 Instruction:1. Remove the original hook2. Install the hook base3. The hook is mounted on the base4. Installation is complete Package Included:1 X Hook1 X Base1 X Set of Screws

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

Description:1. Weight: 61 g2. Dimensions: 2.4 x 9 cm3. Specifications: Clamping diameter 1.7 mm to 4.7 mm4. Material: Main body black adopts new POM (high temperature resistance 120 degrees, low temperature resistance -50 degrees). Non-slip mat uses rubber environmental protection material (high temperature resistance 95 degrees, low temperature resistance -35 degrees), screws are made of stainless steel5. Features: The non-slip pad is added to the clamping part. Its strong suction grip bracket does not shake after fixing, and it is reliable and durable. ‘Easy to install in the position of the rear-view mirror. The connection interface adopts a unified universal size, which is convenient, fast and reliable6. Bearing capacity: 10 KG7. Applicable to: Sports DV, suitable for GPS, navigator, driving recorder, DC, DVR, camera, and other automotive digital electronics8. Routine use: 5 KG9. Installation instructions:1. Twist the two screws down and tighten on the motorcycle / bicycle2. Point the mounting head of the bracket to the position you need, and confirm that the bracket is secure.3. Mount the mini recorder on the bracket and tighten the locking button4.Adjust the appropriate angle by moving the joints by turning the knob on the ball head

Read more less

1. Material: steel, rubber2. Applicable scenarios: home installation, car shop display3. Weight: up to 15kg, suitable for most bicycles4. Features: high-strength steel, reinforced thick base, stable, firm and safe, not easy to deform, 90-degree movable hook, convenient to pick up the car, saving space, rubber-wrapped at the hook, not easy to scratch the wheel, painted on the surface, not easy to rust, Durable5. Weight: about 259g/piece6. Size: about 15x11 cm

Read more less

1. With imitation carbon fiber pattern, it can install a locator under your bicycle seat cushion, so you can grasp the position of your car anytime, anywhere.2. The product is divided into screw type and strap type. The screw type is fixed to the back of the cushion with screws. The strap type can be fixed on the front and back of the cushion, and can also be tied to other places.3. The net weight of the strap model is 12 grams, and the net weight of the screw model is 13 grams.4. The size of the strap version is 40 x 35 x 10mm, and the size of the screw version is 70 x 35 x 10mm5. Note: Only the mounting bracket is included, nothing else

Read more less

1. With imitation carbon fiber pattern, it can install a locator under your bicycle seat cushion, so you can grasp the position of your car anytime, anywhere.2. The product is divided into screw type and strap type. The screw type is fixed to the back of the cushion with screws. The strap type can be fixed on the front and back of the cushion, and can also be tied to other places.3. The net weight of the strap model is 12 grams, and the net weight of the screw model is 13 grams.4. The size of the strap version is 40 x 35 x 10mm, and the size of the screw version is 70 x 35 x 10mm5. Note: Only the mounting bracket is included, nothing else

Read more less

1. It is made of 3D printed plastic material, fixed with widened nylon straps, and pasted with anti-slip glue.2. Honeycomb-shaped three-dimensional reflective surface, eye-catching distance.3. This accessory can install the tracker on the taillight of the mountain bike, which has a good hiding effect.4. The back is designed with grooves that can be installed on various column structures.5. Weight: 16 grams6. Note: Only include strap and box

Read more less

1. It is made of 3D printed plastic material, fixed with widened nylon straps, and pasted with anti-slip glue.2. Honeycomb-shaped three-dimensional reflective surface, eye-catching distance.3. This accessory can install the tracker on the taillight of the mountain bike, which has a good hiding effect.4. The back is designed with grooves that can be installed on various column structures.5. Weight: 16 grams6. Note: Only include strap and box

Read more less

1. Material: plastic 2. Easy to install and remove 3. Suitable for flashlight: diameter 2.5cm 4. 360 degrees rotation 5. Hold the flashlight on your bicycle 6. Dimensions: 6.5 x 3.5 x 3cm

Read more less

1. Material: plastic 2. Easy to install and remove 3. Suitable for flashlight: diameter 2.5cm 4. 360 degrees rotation 5. Hold the flashlight on your bicycle 6. Dimensions: 6.5 x 3.5 x 3cm

Read more less

Model Number:hook for xiaomi mijia m365Type:hook for scooterDescirption:Waterproof, not easy to rustLoading 5 kgStrong, stable, not easy to fallEasy to installApplicable to bicycles, electric vehicles, motorcycles, electric scootersSpecification:Material: aluminum alloyColor: red + whiteMaximum load: 5 kgMaximum opening: 2 cmApplicable models: universalOverall size: 5x6cmInner hole size: 2.5x4.5cmApplication:For Xiaomi Mijia M365 Instruction:1. Remove the original hook2. Install the hook base3. The hook is mounted on the base4. Installation is complete Package Included:1 X Hook1 X Base1 X Set of Screws

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: iron 2. Product bare weight: 705 grams 3. Box weight: 746 grams 4. Packing box size: 17x9x7.5cm 5. The maximum load capacity is 60kg, as long as you have a sufficiently strong wall. 6. Very stable wall frame. 7. Save space, ideal for shed corner and garage storage. 8. Suitable for any solid wall. 9. Suitable for all types of bicycles, such as mountain bikes, road bikes, strollers and folding bikes. 10. Easy to install, the fixing hook allows you to suspend and disassemble the bike in one second.

Read more less

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. Weight: 302g 2. Dimensions: 16.5 x 5.9 x 4cm 3. Material: aluminum alloy 4. Features: beautiful and practical, suitable for multiple vehicles, small and convenient, fast installation and disassembly, does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. Installation steps: - Measure the length, width and height of the rear row of the car - Measure the width of the bicycle, find the center position and determine the position of the hole - Use a cross wrench to fix the screws - After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. These s-style clips brake cable housing guides are made of plastic, which is durable, lightweight and reusable. 2. They can be used in organize brake cable and derailleur cross hooks. There is a fixed hole that can rotate 360 degree, so can be used flexibly, this is the distinct feature for distinguished from other products. 3. Suitable for: mountain bike, MTB, road bike, folding bike, fixed gear bike, etc. 4. Material: Plastic 5. Length: 18.7mm 6. C-C Distance: 10.7mm 7. Applicable: 4/5mm housing

Read more less

1. Simple and practical 2. As long as your code table fixed seat can be compatible with Garmin. This back buckle can be pasted on your code table bracket. 3. Compatible with phone 4. Easy and convenient to carry and use 5. A great gift for yourself

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: PV polycarbonate2. Dimensions: Mountain bike model: 7.5 x 8 cm, road bike model 4 x 4 cm3. Weight: 89 grams for mountain bikes, 17 grams for road bikes4. Using high-strength PC plastic, rigid and tough, beautiful, safe, free to use your creativity, fancy parking anytime, anywhere5. The package contains: parking buckle, expansion screw, screw

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Material: Silicone2. Size: 14x2.2x1cm (one size)3. Net weight: about 10 grams4. Color: yellow, red, green, blue, black, orange, rose red, translucent5. Scope of application: bicycle fixed strap, flashlight lamp holder, car light beam lamp Features:1. Tie a variety of small riding equipment, double-sided special design grooves are shockproof and non-slip2. Good waterproof and anti-seismic effect, tear resistance, wear resistance, fatigue resistance to bending3. The material is soft and will not scratch the car bod

Read more less

1. Universal strap installation, can install riding equipment within 8.5 cm in diameter, supports horizontal and vertical installation, and the handlebar installation diameter is 19-33mm. 2. Thicken and shockproof, no bumps on the road. 3. Simple installation. 4. Suitable for all kinds of bicycle models. 5. The screws are fixed and the size is adjustable. 6. Material: ABS+Rubber

Read more less

1. Universal strap installation, can install riding equipment within 8.5 cm in diameter, supports horizontal and vertical installation, and the handlebar installation diameter is 19-33mm. 2. Thicken and shockproof, no bumps on the road. 3. Simple installation. 4. Suitable for all kinds of bicycle models. 5. The screws are fixed and the size is adjustable. 6. Material: ABS+Rubber

Read more less

1. Suitable for: Mountain Bike / battery car / road bus / folding car 2. Material: high elastic silicone 3. There is a high elastic silicone easily tied regardless of bicycle lamp, stopwatch, repair kit, tool set, pump, bottle rack, mobile phone...... Any small item can be easily mounted on a bicycle!

Read more less

1. Material: aluminum alloy 2. Features: beautiful and practical, suitable for multiple vehicles 3. Small and convenient, fast installation and disassembly 4. Does not hurt the car paint, strong bearing capacity, hard and compression, safe and stable 5. After installing the retainer, remove the bicycle tire and fix the bicycle on the stabilizer

Read more less

1. Product Name: Fixed table2. Weight: 17g3. Material: plastic steel4. Applicable: handlebar diameter 31.8mm5. Size: 15x10x8cm6. Applicable models: GARMIN Edge 200 / 500 / 510 / 520 / 800 / 810 / 820 / 1000Bryton RIDER 20/30/40

Read more less

1. Product Name: Fixed table2. Weight: 17g3. Material: plastic steel4. Applicable: handlebar diameter 31.8mm5. Size: 15x10x8cm6. Applicable models: GARMIN Edge 200 / 500 / 510 / 520 / 800 / 810 / 820 / 1000Bryton RIDER 20/30/40

Read more less

1. Material: iron2. Purpose: the hook of the bicycle trailer connected to the rear axle of the bicycle3. Application: suitable for most bicycle trailers4. Features: sturdy and durable, not easy to rust, convenient connection, wide applicability5. Bolt hole diameter: about 11 mm6. Trailer handle rod hole diameter: about 7 mm7. The diameter of the recessed area of the shaft nut: about 21 mm8. Floor length: about 55 mm9. Weight: about 159 grams

Read more less

1. Material: iron2. Purpose: the hook of the bicycle trailer connected to the rear axle of the bicycle3. Application: suitable for most bicycle trailers4. Features: sturdy and durable, not easy to rust, convenient connection, wide applicability5. Bolt hole diameter: about 11 mm6. Trailer handle rod hole diameter: about 7 mm7. The diameter of the recessed area of the shaft nut: about 21 mm8. Floor length: about 55 mm9. Weight: about 159 grams

Read more less

1. Stable installation, strong and durable, saving space2. Movable hook, free adjustment3. Anti-scratch and anti-skid, protect tires4. One-piece molding, stable and durable5. Rubber ring anti-scratch hook6. Long-lasting load-bearing, with screws7. Wheel groove anti-slip design, not easy to shake8. There is no need to perforate screws for the rear wheel gasket, just remove the film and just stick it.9. Material: ABS10. Applicable models: road bikes, mountain bikes, commuter bikes, folding bikes, etc.11. Weight: about 18kg12. Features: It is necessary to perforate and install on the wall to hook the front wheel of the bicycle, which is used to park the bicycle to save space, and it can also be used for bicycle shop display.13. Weight: 390g

Read more less

1. Stable installation, strong and durable, saving space2. Movable hook, free adjustment3. Anti-scratch and anti-skid, protect tires4. One-piece molding, stable and durable5. Rubber ring anti-scratch hook6. Long-lasting load-bearing, with screws7. Wheel groove anti-slip design, not easy to shake8. There is no need to perforate screws for the rear wheel gasket, just remove the film and just stick it.9. Material: ABS10. Applicable models: road bikes, mountain bikes, commuter bikes, folding bikes, etc.11. Weight: about 18kg12. Features: It is necessary to perforate and install on the wall to hook the front wheel of the bicycle, which is used to park the bicycle to save space, and it can also be used for bicycle shop display.13. Weight: 390g

Read more less

1. Stable installation, strong and durable, saving space2. Movable hook, free adjustment3. Anti-scratch and anti-skid, protect tires4. One-piece molding, stable and durable5. Rubber ring anti-scratch hook6. Long-lasting load-bearing, with screws7. Wheel groove anti-slip design, not easy to shake8. There is no need to perforate screws for the rear wheel gasket, just remove the film and just stick it.9. Material: ABS10. Applicable models: road bikes, mountain bikes, commuter bikes, folding bikes, etc.11. Weight: about 18kg12. Features: It is necessary to perforate and install on the wall to hook the front wheel of the bicycle, which is used to park the bicycle to save space, and it can also be used for bicycle shop display.13. Weight: 390g

Read more less

1. As a support for flashlights, speakers, air pumps, etc.2. 360 degree rotation, simple operation3. Easy to install without tools4. Quick release and installation design5. Sturdy structure, no peculiar smell, strong and durable.6. Material: plastic, rubber7. Suitable for different tube sizes

Read more less

1. Material: plastic2. Can rotate 360 degrees3. The clamp is firm and reliable, shockproof4. Super large clip, suitable for flashlights, umbrellas, small pumps, U-shaped locks5. Single weight: 0.104kg6. Size: the diameter of the upper mouth is 1.8-3.5cm, the diameter of the lower mouth is 2-3.5cm, and the length is about 11.5cm

Read more less

1. Q195 wire stamping forming2. Surface black spray treatment3. Wear resistance, corrosion resistance, strong load-bearing4. Material: Iron5. Load-bearing capacity: up to 15kg6. Surface treatment: plastic spray + dipping7. Weight: about 275g/piece for 820 models, about 284g/piece for 830 models8. Size: 820 models are about 17.8x13.3x8.8 cm, 830 models are about 9.5x16x14 cm9. Note: 830 models include screws, 820 models do not

Read more less

1. Q195 wire stamping forming2. Surface black spray treatment3. Wear resistance, corrosion resistance, strong load-bearing4. Material: Iron5. Load-bearing capacity: up to 15kg6. Surface treatment: plastic spray + dipping7. Weight: about 275g/piece for 820 models, about 284g/piece for 830 models8. Size: 820 models are about 17.8x13.3x8.8 cm, 830 models are about 9.5x16x14 cm9. Note: 830 models include screws, 820 models do not

Read more less