HDMI Series

About The Product1. Splitter from 4 digital-video (CVI) or digital-audio 2. Video (HDMI) sources 3. Digital TV, HDMI flat panel monitors, HDTV 4. DVD players, satellite receivers, set-top boxes 5. Digital projectors 6. Audio video receivers 7. Other HDMI-enabled devices 8. Source port connector: 19 pin HDMI 9. Display device port connector: 19 pin HDMI 10. Video bandwidth: up to 340MHz 11. Vertical frequency range: 60 / 85HZ 12. Power consumption (max): 5W 13. Power adapter: 5V / 1.5AFeature1. 1 input and 4 output splitter. 2. Approved by HDMI attached lab. 3. Fully support 1080P HDTV. 4. HDCP compliant. 5. Support DTS, dobby 7.1 channel audio. 6. Gold plated connector, cable fixing bolt for long cable. 7. Plug and play. 8. amplifier and equalizer function for extending the HDMI cable 9. Rack mounting kit and wall mounting kit version.

Read more less

1. Built in high performance RTOS operating system and audio decoder chip, support DTS / AC-3. 2. Super fast start time about 3 seconds. 3. HDMI iutput, 1 x CEN, 1 x SW, 1 x FL, 1 x FR, 1 x SL, 1 x SR, 3.5mm headphone port. 4. HDMI input resolution: Up to 3840x2160 30Hz; 4096x2160 30Hz. 5. HDMI to achieve audio signal decoding synchronization. There are PASS / 2.0CH / 5.1CH three audio mode options. 6. Support 6CH volume synchronous adjustment. 7. Auto decode AC-3/DTS (LPCM/PCM/RAW) input signal without any action. 8. Compatible with network player, HDTV, Blu-ray DVD, DVD, PS4, Xbox 360, DM500S, DM800HD etc. 9. Small size and metal case, anti-interference. 10. Adopt 6CH RCA / 3.5mm headphone port output, convenient and efficient in use.

Read more less

1) HDMI resolution: HDMI 1.2a 2) Input Video signal: 0.5-1 5Volts p-p 3) Input DDC signal: 5VoJts p-p (TTL) 4) VGA or YPbPr output: Support up to UXGA and 1080l (60Hz) 5) Audio output: R/L Analog and optical 6) Max transmission band with: 5.1Gbps 7) Max working current: 600rnA 8) Power adapter format: Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A 9) Operating Temperature range: (-15 to +55'C) 10) Operating Humidity range: 5 to 90%RH (No Condensation) 11) Dimension (L x W x H): 174x70x20 (mm) 12) Weight: 750g FEATURES 1) One HDMI input signal convert to one YPbPr + SPDIF or VGA+SPDIF sink device 2) Support video input: HDMI 12a 3) Support audio output: SPDIF(Optical)+ R/L analog 4) Support output: Support up to UXGA and 1080l(50760Hz),the same format as input 5) HDCP 1.2 protocol compliant 6) LED indication: when source or sink is working, LED relative to is light. 7) No loss of quality 8) Installs in minutes 9) Need DC5V/1A power supply

Read more less

The HDMI 2.0 matrix 4x2 can connect 4 HD signal sources to 2 HD display terminals with optical fiber or stereo headphone output. The matrix allows four HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors. And any output ports can realize independent audio output by optical fiber or stereo head phone. Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments. Features: 1. Support 3D video format 2. Support for 4K (input) resolution 2K (output)（Down scaler） 3. Support 2 HDMI audio outputs, 3.5mm earphone jack and optical output at same time 4. 4 HDMI inputs switch and split to 2 HDMI displays. 5. Support LPCM/Dolby/DTS 5.1 channel. Specification: 1. HDMI version: HDMI 2.0 2. HDMI resolution: up to 3840*2160/60Hz 3. Support video format: 8/10/12 bit deep color 4. Support audio format: LPCM/DTS/Dolby-AC3 5. Band width: 600MHz 6. Baud rate: 3x6Gbps 7. Input cable distance: - 4K/30Hz less than or equal to 15M AWG26 HDMI standard cable - 4K/60Hz less than or equal to 5M HDMI 2.0 standard cable 8. Output cable distance: - 4K/30Hz less than or equal to 15M AWG26 HDMI standard cable - 4K/60Hz less than or equal to 5M HDMI 2.0 standard cable 9. Working current: 600mA 10. Power adapter format: Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A 11. Operating Temperature range: (-15 to +45 degree C) 12. Operating Humidity range: 5 to 90%RH (No Condensation) 13. Dimension (LxWxH): 198 x 70 x 24(mm) 14. Housing Material: Metal 15. Weight: 300g

Read more less

1. Support 4xHDMI input, 1xHDMI output. 2. Support 4 channels HDMI signal screen segmentation. 3. Support 4 channels HDMI signal seamless switching. 4. Support highest resolution up to 1080P@60Hz. 5. Support IR remote control. 6. Compatible HDMI1.3a, HDCP1.2, input compatible DVI1.0 version. 7. Support resolution: 1080P, 720P, 1080i, 1024X768, 1360X768 and so on. 8. Support audio output format: PCM2. 9. Support standard AWG26 cable, input up to 15m, output up to 15m. 10. DC 12V/1A power adapter.

Read more less

Product Description: This product can control multiple computers through a set of mouse, keyboard and display. It is easy to operate, improve work efficiency and save cost.Features:1. Support hotkey switching2. Support infrared remote control switching3. Support for remote control button switching4. Support U disk read and write5. Support LED switching channel indication6. Support most mouse and keyboard on the marketProduct Parameters:1. Applicable systems Windows, Apple, MAC Linux, Netware, Unix2. Input port: HDMI& USB-A3. Output port: HDMI4. Control port: USB-A5. Read and write port: USB-A6. USB port version: USB2.07. HDMI port version: HDMI2.08. The highest resolution: 4K@60HZThe product supports three switching methods:1. Hotkey switch2. Remote control switching3. Line control button switchingHotkey switching operation instructions:Option One.2. Switch to the first computer: press and hold the keypad "*", then press and hold "1" and then release3. Switch to the second pair of computers: press and hold the keypad "*", then press and hold "2" and then releaseOption Two:1. Switch to the first computer: Press and hold "CTRL" and "ALT" at the same time, then press "1" to switch to the second computer2. Switch to the second computer: Press and hold: "CTRL" and "ALT" at the same time, then press "2"Reset:Click "CTRL" "CTRL" "R" consecutively

Read more less

1. Provides a way to switch between multiple HDMI sources, such as laptops, HD-DVDs, PS3s, Xbox 360 to HDMI TVs or monitors.2. It allows switching of 3 inputs and maintaining all signal components present in the encoded signal HDCP encryption.3. You can easily select different program sources via the front panel buttons or the infrared remote control without moving the cable.Specification1. Support 4K x 2K, full HD 1080P.2. Support 3D.3. Support 12 bits per channel (36 channels in all channels).4. Support 250MHz / 2.5Gbps per channel (7.5Gbps full channel).5. No external power supply is required.6. Switch: push button switch, infrared remote control.7. Size: 126x75x18mm.Note1. It is recommended to use an HDMI 1.4 cable as the input source cable. TV sticks are not supported.2. It is recommended that the input HDMI cable be less than or equal to 15 feet and the output HDMI cable be less than or equal to 30 feet.3. There is a plastic film in the battery compartment of the remote control. Please remove it before using the remote control.

Read more less

1) HDMI V1.4 version (With 3D & 4K x 2K) 2) Distributes 1 HDMI source to 8 HDMI displays simultaneously 3) Support all the mandatory and several optional 3D formats described in HDMI 1.4 specifications 4) Support high definition resolutions: 4K x 2K@24HZ, 1080P@60HZ, 720P/1080I@120HZ 5) Support digital audio format, such as definition audio support: Dolby TrueHD, and DTS-HD Master audio 6) DC 5V Power supply 7) With power switch 8) Size: 278 x 155 x 25mm

Read more less

Features1. 1x HDMI input and HDMI output 2x, you can synchronize HDMI audio signal separation. It supports 1x SPDIF optical digital audio output, 2 channel RCA analog audio output 2. Entry HDMI support up to 1080p / 60 Hz, supports 3D (24 / 30fs) 3. Support Digital SPDIF audio format: Dolby Digital (AC3), DTS, LPCM, and support 5.1CH 4. Support 3 EDID management modes for audio formats, you can switch between high-EDID (2CH / 5.1CH) and external EDID (TV). 5. Indication LED: when source or sink is working, LED relative to is light. 6. Switch: Audio edid mode switch. This switch allows users to select the audio source EDID. 7. Pass: HDMI mode of passage. Switch to how to move to HDMI source for audio output for the connected TV or AV receiver supports EDID to LPCM 7.1 channels. 8. 2ch: 2CH LPCM mode. Switch to the mode for the HDMI source to output 2CH LPCM 2-channel audio for high-EDID. Then, HDMI, SPDIF, RCA and output stereo audio headphones. 9. 5.1ch: 5.1CH mode bitstream. Switch to B5.1CH mode for HDMI source to Audio bitstream output by the built-in EDID. Then, HDMI, 5.1CH SPDIF and RCA audio output, headphone output audio comes from FL and FR channel 10. Use 24bit / 192KHz DAC 11. No Loss of quality 12. Installed in minutes 13. DC 5V / 1A power adapter

Read more less

1. 1 x HDMI input, 4 x HDMI output 2. HDMI resolution up to 4K/60fs 3. Supports automatic EDID ,Support differernt resolution output 4. Support Blu-ray DVD 24/50/60fs/HD-DVD/xvYCC 5. Support audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD 6. Support signal Re-Timing 7. Use AWG 26HDMI 2.0 standard cable,input 8. Transmission distance up to 3m, output transmission distance up to 3m 9. Transmit lossless audio and video signal without delay. 10. Simple to install.

Read more less

About the product1. Transmitter combines HDMI video, audio and control signals, then transmits them through single CAT5e / 6 cable. 2. Receiver gets them, separates signal and rebuilds video, audio and control ones, outputs through HDMI interfaces. 3. Extending distance is 50 meters at resolutions 1080P 3D or 1920x1200 60fs, and 80 meters at 1080i/720P through single CAT5e cable 4. Support audio formats, Dolby True HD, DTS-master, etc 5. Support 3D signals (all 7 formats), such as Frame Packing, Side-by-Side, Top-to-Bottom, etc. 6. Support EDID call back 7. Support CEC pass through 8. VESA DDC and hot swap technology (HPD) 9. Support power over UTP cable, single 12V DC power supply from any side of TX or RX 10. Bi-direction remote IR (RX->TX and TX->RX) 11. Both HDMI input and output are compatible with HDCP 1.2 12. Be compatible with DVI 1.0 13. Support cascade to enhance extending distance 14. Industrial metal case, easy to install

Read more less

Features1. To apply new generation low power consuption digital chip processing. 24 hours non-stop working, low calorific value, working steady. 2. Can wipe of the shaking and delaying phenomenon when the image move quickly by 3D compensation technique. 3. To adopt DCDI process technique. - The patent technology DCDI which was R&D by Faroudya. Can remove the serrated twill in the video of the Normal High defitnion converters. - The adopted Bad edit detection ability can test all kinds of video code stream of the original code stream of the films. And rebuilt a more accurate video signals. By this way, it can formed a no dynamic material image under the completely vertical resolution. - The adopted True Life Enhancement technique can distinguish the details of the picture. Such as the microgroove of the skin, spot or hair. The processing of the details make the picture looking more clearly and lively. - To adopt the Motion Adaptive processing technique. When reduce the noise point, but not produce spot. To really restore the original face of the of the pictures. - The adopted the Dynamic testing technology can selectly briefly filter the static pictures. And use the picture memory technology to memory the Chroma which was asked to be stored. - After adopting the technolgy, the needless fancy shade will not appear When in the scene of where color crisscrossed and changed: Such as the tiled roof, the clothe with crossed pattern, and the falling leaves. 4. To adopt Sacler video processing, and can Scaler Down the high defintion HDMI signal into CVBS output. 5. The build-in HDMI video/audio distribution can bypass output the High definition HDMI signal. 6. The build-in video DAC can process HDMI digital video signal, and convert into analog stereo output.Specifications1. Hardware converting, plug and play, no need of any software drive. 2. Compatible with HDMI 1.3 3. Support NTSC and PAL, to standard output 4. One hdmi input, One hdmi output, one cvbs output, and one L/R stereo output. 5. HDMI Input mode: 480i, 480P, 576i, 576P, 720P, 1080I, 1080P 6. Compatible with DVI mode: 800x600, 1024x768, 1280x720, 1280x1024, 1920x1080/@60hz Etc. 7. HDMI output, With AV sync output 8. Av video output: PAL NTSC optional 9. Video output: L/R sound channel 10. Size: 100mm(W)x105mm(D)x 25mm(H)Platform1. Can be used in the KTV dream works, can be a expanded platform. 2. AV signal can be easily transferred. Esaly connection, HDMI input, and hdmi output. - Do not take up the original machine output HDMI interface. 3. Can be used in the imprtant meeting system. Can be a display platform. - Can be controlled in a distance, HDMI output can be connected with the currently showing platform. And can cut off the AV output signal source at any time, to prevent the unrelated informations was viewed by the unrelated person. 3. Can be used in the important operation of the treatment. - When input the HDMI signals, and output the hdmi signal at the same time, Can be used to watch the operation currently. And AV signals will be transferred to the Monitoring room, so that the operation can be monitored at a remote place.

Read more less

Features1. Using a new generation of low-power digital signal processing technology, 24 hours of uninterrupted and stable operation. 2. Adopt 3S compensation technology to eliminate the jitter and rain technology of snapshot images. 3. Adopt DCDI processing technology to eliminate the jagged twill of ordinary HD converters in video. 4. Use the "bad edit detection" capability to detect raw streams in various video streaming movies and reconstruct more accurate video signals to form full vertical resolution without the need for dynamic physical images. 5. Use real-life enhancement techniques to identify image conversion details such as fine lines, spots or hair. The processing of these details makes the picture look clearer and more vivid. 6. Size: 10x10.5x2.5cm, weight: 290g 7. Material: MetalPackage Contents1. Converter x 1 2. Power adapter (US/EU/AU/UK Optional) x 1 3. Instruction manual x 1

Read more less

Features1. This USB to HDMI converter provides the versatility of converting any standard USB 3.0 port to a HDMI output connection. This unit will enable virtually any PC or Mac to connect to a high definition display (HD TV or Projector etc.) via a standard HDMI cable 2. Compatible HDTV or projector 3. Supports resolution up to 1920x1080 (1080P) 4. Audio take from line out or headphone connection is mixed into the HDMI output 5. Standard and widescreen are both supported (4:3 or 16:9) 6. Compatible with all kinds of monitors 7. 3.5mm audio output to retain the ability to connect headphones 8. The embedded audio through HDMI 9. Easy to install 10. Completely powered from the USB Connection - No need for external power supply

Read more less

1) This USB to HDMI Converter provides the versatility of converting any standard USB 2.0 port to a HDMI output connection. This unit will enable virtually any PC or Mac to connect to a High Definition Display (HD TV or Projector etc.) via a standard HDMI Cable 2) Compatible HDTV or projector, 3) Supports resolution up to 1920x1080 (1080P) 4) Audio Taken From Line Out or Headphone Connection is Mixed Into the HDMI Output 5) Standard and Widescreen are both supported (4: 3 or 16: 9) 6) Compatible with all kinds of monitors 7) 3.5mm Audio Output to Retain the Ability to Connect Headphones 8) The embedded audio through HDMI; 9) Easy to install 10) Completely Powered From the USB Connection - No Need for External Power Supply

Read more less

Features1. This USB to HDMI converter provides the versatility of converting any standard USB 2.0 port to a HDMI output connection. This unit will enable virtually any PC or Mac to connect to a high definition display (HD TV or Projector etc.) via a standard HDMI cable 2. Compatible HDTV or projector 3. Supports resolution up to 1920x1080 (1080P) 4. Audio take from line out or headphone connection is mixed into the HDMI output 5. Standard and widescreen are both supported (4:3 or 16:9) 6. Compatible with all kinds of monitors 7. 3.5mm audio output to retain the ability to connect headphones 8. The embedded audio through HDMI 9. Easy to install 10. Completely powered from the USB Connection - No need for external power supply

Read more less