Test Equipment

24 products


  • Universal Battery Tester for 1.5V AAA, AA and 9V 6F22 Batteries-garmade.com

    Universal Battery Tester for 1.5V AAA, AA and 9V 6F22 Batteries

    1) Test batteries types: **1.5V AAA, AA, HP16, MN2400, R03, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1 **9V PP3, MN1604, 6F22, 006P 2) Portable and useful 3) Never need to guess the battery level again 4) Three colored indicators give accurate and easy battery power reading 5) Size: 120*7*35mm

    €5,74

  • BENETECH GM3110 Surface Resistance Meter-garmade.com

    BENETECH GM3110 Surface Resistance Meter

    About the productAs one resistance meter for object surface, it can measure the resistance value on object surface by putting two parallel electrodes close to object surface to be measured, so as to judge whether the measured object is a conductor, static material or insulator; meanwhile the meter can be used to measure the resistance to ground of object, which is specially applied to different anti-static fieldsFeatures1. Surface resistance test 2. Three modes to display resistance value on object surface or material property simultaneously 3. Ambient temperature measuring 4. Temperature unit conversion 5. Data holding 6. LCD backlight

    €26,78

  • ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer-garmade.com

    ZB2L3 Battery Capacity Tester 1.2-12V 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer

    1. Module parameters:- Power supply voltage: DC4.5-6V (micro USB interface)- Working current: no more than 70mA- Discharge voltage: 1.00V-15.00V Resolution 0.01V- End voltage range: 0.5-11.0V- Support through current: no more than 3.000A resolution 0.001A- Voltage measurement error: less than 1% + 0.02V- Current measurement error: less than 1.2% +-0.002A- Battery capacity range: 9999Ah (1Ah = 1000mAh) 2.2. When the value is large, it is switched by decimal point shift. When it is less than 10Ah, it will be displayed as X.XXX, when it reaches more than 10Ah, it will be displayed as XX.XX, and so on.3. Circuit board size: 50mmX37mm4. Finished product size: 50mmX37mmX17mm (Length X Width X Height, including copper foot height)5. Weight of board and accessories: single board 28g (including copper pillar), two 5W ceramic resistors 9g, 50W resistor about 27g (including wire)6. Note: In order to improve the voltage measurement accuracy, this circuit is specially designed with DC bias. When the terminal is connected nothing, a small voltage will be displayed, which does not affect the actual measurement. 0V) will display 0. If you want to understand the principle, you can check the superposition theorem in electrical engineering.7. How to use:- The battery under test should be fully charged first.- Connect the positive pole of the battery under test to the input positive pole, and the negative pole to the negative pole of the input. Connect the load to the output positive pole and the output negative pole, and connect the tester micro USB with working power (not available for desktop or notebook USB power supply). The battery voltage is displayed at this time.- To start the test directly, just press the “OK” button, the tester can automatically formulate a suitable termination voltage according to the full charge voltage of the battery, and will flash the display 3 times to start the test. Need to manually set the termination voltage, just press the "+" or "-" button to modify in the battery voltage display state, the termination voltage is displayed at the beginning of P, the back represents the voltage value, the resolution is 0.1V, after setting, press "OK" "start testing.- After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, the display data stays above the capacity (Ah) and flashes quickly with the corresponding indicator light, the displayed capacity is the actual discharge capacity of the battery, press it "OK" can stop the flashing and let the data display stably. Press the "OK" button again to restore to the state of just powering up and replace the battery to test the next section ...8. Error code and meaning:- Err1: The battery voltage is higher than 15V- Err2: The battery voltage is lower than the set termination voltage- Err3: The battery cannot bear the load discharge current or the line internal resistance is too large- Err4: Current is too large (current exceeds 3.1A)- Err5: Improper use or wiring error has caused the device to burn down and cannot be used (current sampling or control switch MOS burned)9. Note: If the battery is reversed, when the load is turned on and the load current is large (about> 0.8A), the circuit switch tube may be damaged!10. Secondary calibration operation: Press and hold three buttons to power on the tester at the same time, enter the calibration mode, first display the number of calibration records, then enter the formal calibration sampling program to display 0u0A, then short-circuit the input positive and negative poles and press "OK "Button to complete displaying J10u, apply a standard DC voltage of 10.00V between the input positive and negative electrodes, press the" OK "button, and then display J2.0A, apply to the output negative electrode (inflow direction) and input negative electrode (outflow direction) After a constant DC current of 2.0A, press the "OK" button once to complete the calibration. The tester will pre-check the calibration data. If the calibration data is reliable, it will display 4 calibration numbers in turn and then exit. If the pre-audit believes that the data is not reliable, discard the data and exit.

    €5,40

  • H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)-garmade.com

    H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)

    Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cm

    €7,98

  • H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)-garmade.com

    H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)

    Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cm

    €7,98

  • Digital LCD Screen Battery Tester (R20S / R14S / R6S / R03 / R1 / Button / 6F22)-garmade.com

    Digital LCD Screen Battery Tester (R20S / R14S / R6S / R03 / R1 / Button / 6F22)

    1)Measuring Battery Types:R20S R14S R6S R03 R1 Button 6F22 2)Easy to read LCD display 3)Remove the battery cover,place two 1.5V battery type R03 in correct polarity as figure and put the cover back. 4)Push power switch,test as figure. 5)If the LCD digits did not show,the power source battery has been exhausted,replace new 1.5V battery type R03 or substitute.

    €9,00

  • BT-168D Digital LCD Display Battery Universal Tester for 1.5V AAA, AA and 9V 6F22 Batteries-garmade.com

    BT-168D Digital LCD Display Battery Universal Tester for 1.5V AAA, AA and 9V 6F22 Batteries

    If you want to replace your old battery tester, why not try this high quality BT-168D ABS Digital Battery Tester Black & Red which is a good assistant for each professional. It features high quality material and easy operation even for green hand. It will quickly test the capacity of your battery as you wish. What is more, made of high quality ABS, it has solid construction which is durable to use for a long time. With clear LCD digital screen, you can see the situation easily. So what are you waiting for? Buy it now! Features: 1) New and high quality 2) High sensitivity 3) Compact and portable 4) Anti-slip design, easy to use 5) It will quickly test the capacity of your battery as you wish 6) You can see the situation easily with clear LCD digital screen Specifications: 1) Model: BT-168D 2) Color: Black,Red 3) Material: ABS 4) Display: LCD Screen 5) Dimensions: 10.8cm x 6cm x 2.4cm 6) Weight: 2.4 oz / 68 g 7) Test batteries types: - 1.5V AAA, AA, HP16, MN2400, R03, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1 - 9V PP3, MN1604, 6F22, 006P 8) Package Includes: -1 x Battery Tester

    €5,18

  • Battery Tester Battery Fuel Detector for C / D / N / 9V / AA / AAA / 1.5V Digital Voltage Measurer-garmade.com

    Battery Tester Battery Fuel Detector for C / D / N / 9V / AA / AAA / 1.5V Digital Voltage Measurer

    Package:Blister packaging1. Product material: ABS plastic2. Weight: about 36 grams3. Size: 92 x 63 x 14 mm4. Battery type: 1.5V button battery (included)5. Measurable type: C / D / N / 9V / AA / AAA / 1.5V battery, does not support any rechargeable battery test.6. Features: LCD power indicator screen, power test at a glance.

    €7,92

  • BT860 Pointer Style Battery Capacity Tester-garmade.com

    BT860 Pointer Style Battery Capacity Tester

    1. Size: 55 x 52 x 23 mm 2. Weight: 33 grams 3. Fits For Testing: - 9V Batteries - 1.5V Button cells - 1.5V Regular or rechargeable batteries,ˆ(Batteries are not included)‰ Features: 1. Compact size and light weight 2. Good companion for travel 3. Easy-to-read color-code scale indicates power level , tells you instantly the condition of the battery 4. One movable arm to accommodate the battery 5. Two buttons on the side for testing 9 volt batteries

    €5,14

  • 5V 1A / 2A / 3A AUSB ging Discharge Loader Mobile Power Resistance Tester-garmade.com

    5V 1A / 2A / 3A AUSB ging Discharge Loader Mobile Power Resistance Tester

    1.Type: Exclusion2. Performance: High temperature3. Material: Wire wound4. Production process: Ceramic insulation power type5. Shape: Cylindrical6. Allowable deviation: +/- 5%7. Rated power: 10 (W)8. Power characteristics: Medium power9. Nominal resistance: 3 current dual switch load10. Applicable type: Universal

    €5,30

  • Color Screen Version Graphic Display M328 Transistor Tester Resistance Meter Inductance Meter Capacitance Meter ESR Meter-garmade.com

    Color Screen Version Graphic Display M328 Transistor Tester Resistance Meter Inductance Meter Capacitance Meter ESR Meter

    1. Supported languages: Simplified Chinese, Traditional Chinese, English (switch between three languages)2. Dimensions: 70mmx135mmx24mm3. Power supply: DC9V (need to provide its own 9V stacked battery 6F22)4. Weight: 0.128kg (excluding battery)5. Operating instructions: 1,2,3 pins can be connected at will, automatically identify the type, automatically detect the pin sequence, graphical display, and automatically measure parameters. Full fool operation.6. Transistor range: 2 or less (including 2) PN junction transistors, do not have other internal resistance and capacitance original.7. Resistance measurement 0.5Ω-50MΩ8. Inductance measurement 0.01mH-20H9. Capacitance measurement 25pf-100000uF10. Function introduction:- One-key measurement operation, power off automatically after delay. The shutdown current is only 20nA, which supports battery operation.- Automatic detection of PNP and NPN bipolar transistors, N, P-channel MOSFETs, JFET field effect transistors, diodes, dual diodes, thyristors, resistance, capacitance, inductance. Automatically detect pin definitions.- Measure the current amplification factor (B) and the conduction voltage (Uf) of the bipolar transistor. Darlington transistors can be identified by high threshold voltage and high current amplification factor.- The protection diode inside the bipolar transistor and MOSFET can be detected and displayed on the screen.- Measure the threshold voltage and gate capacitance of MOSFET.- Support the measurement of two resistances, the potentiometer can also measure. If the potentiometer is adjusted to one end of it, the tester cannot distinguish between the middle and both ends of the pin.- The resolution of resistance measurement is 0.1 ohm, and the highest measured value is 50M ohm.- The capacitance measurement range is from 25pf to 100mF (100,000 UF). The resolution can reach 1 pF, and the measuring range of the inductance is 0.01MH-20H, otherwise it will be displayed as resistance. If the DC resistance value of the inductance is higher than 2100 ohms, it will also be displayed as resistance. During the capacitance test, the VLoss displayed on the screen are loss and attenuation. The larger the value, the closer the capacitance is to scrapping! ESR is impedance, the smaller the value, the better the capacitor performance!- It can detect the equivalent series resistance (ESR) of capacitors above 2UF with a resolution of 0.01 ohm. This function is very important for detecting capacitor performance.- The symbols of the correct direction can be displayed for both diodes, and the forward voltage drop can be displayed at the same time.- The LED is detected as a diode, and the forward voltage drop is higher than the normal value. The dual light emitting diode is detected as a dual diode. At the same time, the LED will flash.- The time of each test is about two seconds, only the measurement of large capacitance and inductance will take a long time11. Important note: All capacitors must be discharged before testing.

    €22,16

  • USB Adjustable Constant Current Electronic Discharger Load Anti-Aging Intelligent Discharge Resistance Tester-garmade.com

    USB Adjustable Constant Current Electronic Discharger Load Anti-Aging Intelligent Discharge Resistance Tester

    1. Suitable voltage DC3.7-13V2. Current adjustment 0.15A-3A, continuously adjustable3. The continuous discharge power is 15W, that is, the discharge current is about 1A at 13V, and the discharge current is 3A at 5V4. The fan starts and stops intelligently to control the temperature around 40 degrees5. USB positive and negative can lead to a wider range of applications separately

    €9,60

  • GY-6S 12V Lead-acid Battery Power Meter Lithium Battery Capacity Indicator Display Tester Percentage Voltmeter-garmade.com

    GY-6S 12V Lead-acid Battery Power Meter Lithium Battery Capacity Indicator Display Tester Percentage Voltmeter

    1. 12V battery, battery, water battery and lithium battery can be used for liquid crystal display2. Display percentage, visually display battery power, directly connect battery positive and negative to display battery power3. Compatible with the following batteries:- Lead acid: 12V, 24V, 36V, 48V- Lithium battery: 2 strings lithium battery, 3 strings lithium battery, 4 strings lithium battery, 5 strings lithium battery, 6 strings lithium battery, 7 strings lithium battery, 8 strings lithium battery, 9 strings lithium battery, 10 strings lithium battery, 12 strings lithium battery, 13 strings lithium battery, 14 strings Lithium battery, 15 lithium battery4. The battery has its own button, which allows you to modify the battery specifications yourself5. Dual display of power percentage / voltage, you can also use the button to switch off the power, double button design, quick and easy to set up6. Working voltage: 6-63V7. Working current: less than 5MA8. Sleep power consumption: 12uA (12V test)9. Net weight: 18.7g10. Waterproof level: surface waterproof11. Color: green light12. Dimensions: 61.3X33.3X13.5mm13. Hole size: 58.5X28.5mm14. Installation method: Open an installation hole and press the power to enter. The battery comes with a buckle, no installation screws

    €8,18

  • Watch Repair Tools Button Battery Measuring Instrument Battery Check Meter-garmade.com

    Watch Repair Tools Button Battery Measuring Instrument Battery Check Meter

    1. Gadget to test watch battery capacity in real time, designed for the most common watch button batteries2. Light weight and easy to carry3. Dimensions: About 98 x 55 x 27mm4. Material: Plastic5. Color: Green6. Operation manual:- When the indicator light is on the red area, it means the battery is low and must be replaced.- When the indicator light is on the yellow area, it means that the battery is powered on.- When the indicator is on the green area, it means the battery is full.

    €7,72

  • Multifunctional Battery Storage Box Battery Tester Battery Strength Indicator Storage Box Capacity Tester-garmade.com

    Multifunctional Battery Storage Box Battery Tester Battery Strength Indicator Storage Box Capacity Tester

    1. Material: PP2. Weight: 421 grams3. Size: 35x18x5 cm4. Application: battery tester, battery storage box5. Capacity: can hold 8 large batteries, 10 batteries on the second, 9V 8batteries, AA 48batteries, AAA 24batteries, and some small batteries can also be placed6. Features: unique shape, exquisite and compact, easy to carry, wide applicability, accurate and convenient measurement, environmentally friendly material, durable7. Note: the battery in the picture is not included

    €10,02

  • 2 PCS ANENG 168MAX Portable Battery Tester High-Precision Battery Power Tester Battery Capacity Tester-garmade.com

    2 PCS ANENG 168MAX Portable Battery Tester High-Precision Battery Power Tester Battery Capacity Tester

    1. Material: ABS2. Measuring range: 1.2V~4.8V and 9V battery power3. Display: Digital display screen4. Weight: 29.2g5. Dimensions: 52.6x23.4x53.9 mm6. Universal AA AAA C D 9V button battery tester (Not include battery), put the battery between two points of the battery tester, the easy-to-read display will tell you whether there is power immediately

    €9,12

  • JK-19070823 Battery Storage Box With Battery Capacity Tester(white)-garmade.com

    JK-19070823 Battery Storage Box With Battery Capacity Tester(white)

    1. Material: Plastic2. Function: dustproof, orderly3. Size: 30.5x17.8x5.7cm4. Capacity: 93 cells5. Storage scene: living room, bedroom, study, table, under the bed, battery storage, storage room, drawer6. Scope of application: battery7. Note: The product only contains storage boxes, not batteries and other items

    €10,98

  • BENETECH GT5307B Professional LCD Digital Insulation Resistance Tester-garmade.com

    BENETECH GT5307B Professional LCD Digital Insulation Resistance Tester

    Features1. It is suitable for measuring the insulation resistance of various electrical equipment and insulating materials such as transformer, motors, cables, switches, electrical appliances, etc. 2. Icon display/alarm light on/buzzer alarm three types of alarms to prevent the danger of electric shock. Multiple gears can be selected to measure high and low, and the voltage can be measured after shifting. 3. This instrument is a high performance digital instrument, with large LCD display, display screen make it easy to read measurements. 4. Insulation resistance meter is beautiful, wide range, high accuracy, high resolution, convenient operation, easy to carry. 5. Resistance short circuit protection makes the measurement safer and more assured. Carry out maintenance, testing and verification of various electrical equipment.Functions1. Measurement of insulation resistance 2. AC measurement 3. DC measurement 4. Small resistance measurement 5. Live detection of tested resistance 6. Short circuit protection of measured resistance 7. AC and DC automatic identification 8. Measurement data is locked. 9. Polarization Index 10. Absorption ratio test 11. Automatic discharge 12. Low battery reminder 13. Large LCD screen digital display 14. External DC power supply DC9V 1.5A 15.10M internal resistance measurement 16. Over limit alarm 17. Auto range 18. Red alarm light, buzzer alarm. 19. High voltage alarm 20. Test voltage displaySpecification1. Technical parameters display: Large-screen LCD (up to 500 counts). 2. Over limit indication: Hi: The mark appears on insulation resistance range. 3. Auto range: Higher range: 500 counts, Lower range: 1 count (only on insulation resistance range) 4. Sampling Rate: 2 times / second 5. Allowed altitude: Less than or equal 2000m (for indoor use) 6. Operation environment: Temperature: 0-40 degree C / Humidity: Less than or equal 85% 7. Operation environment: Temperature: -20-60 degree C / Humidity: Less than or equal 90% 8. Overload protection: Insulation resistance range: AC 1200V / 10 seconds; Voltage range: AC 720V / 10 seconds 9. Withstand voltage:AC 6000V (50 / 60Hz) / 5 seconds (between circuit and periphery) 10. Insulation resistance: Greater than or equal 1000M ohms / DC 1000V (between circuit and periphery) 11. Power supply: DC 9V (6x1.5V AA batteries, not included) 12. Current consumption: Approximately 1.5A (normally maintained at approximately 50mA) 13. Battery Life: About 12 hours 14. Dimension: 176 x110 x 77mm

    €68,16

  • BENETECH GT5105A Professional LCD Digital Resistance Tester Meter Megger Earth Ground Resistance Voltage Tester-garmade.com

    BENETECH GT5105A Professional LCD Digital Resistance Tester Meter Megger Earth Ground Resistance Voltage Tester

    This instrument is controlled by intelligent microcontroller chip, with high accuracy and high reliability; it can be used to measure grounding resistance of various power facilities wiring, electrical equipment, fulmination protection equipment and other grounding devices, and it can also measure ground voltage. (Note: This instrument is not suitable for harsh outdoor environmental conditions, such as raining, lightning, etc.) Functions 1. Backlight and battery detection function. 2. Data holding. 3. It can be used for precise three-wire measurement or simple two-wire measurement. 4. When measuring ground resistance, if C or E end of test lead is not in good contact, "---- ohm" warning appears on LCD. 5. "OL" stands for over range. 6.Double insulation or reinforced insulation safety structure 1. Measurement method: - Ground voltage measurement: Average response - Ground resistance measurement: Test signal frequency: about 820Hz, current: 20 ohm about 3.2mA 2. Working environment: Temperature: 5~ 40 degree C, Relative humidity: Less than or equal 80 ~ RH (no fog) Altitude Less than or equal 2000 meters 3. Storage conditions: Temperature: -20 ~ 60 degree C; Relative humidity: Less than or equal 70% RH (no fog) 4. Power supply: 9V power supply: 1.5V (No. 5 alkaline battery) * 6 (Not included battery) 5. Overload protection: Ground resistance: 200V AC (10 seconds) Ground voltage: 400V AC (30 seconds) 6. Insulation resistance: The insulation resistance between measurement circuit and case is not less than 20Mohm

    €101,88

  • BENETECH GT5206A Professional LCD Digital Leakage Protector Switch Tester-garmade.com

    BENETECH GT5206A Professional LCD Digital Leakage Protector Switch Tester

    1. This instrument is only suitable for single-phase 230V /50Hz (with power supply voltage range 2. Wiring check: whether three LED indicators are correct, if two green indicators P-E and P-N are on, and red indicator is not on, then it is correct: the test can only be triggered if the wiring is correct 3. Phase angle selection: you can choose to start the test from positive (0 degree) or from half cycle negative (180 degree) 4. a??OL" is displayed for over range: when the test trip action time exceeds high test time, the LCD will display "OL mS" 5. Automatic data holding: After test is completed, the displayed measurement results are held for a certain period of time 6. AUTO RAMP test: The AUTO RAMP test can test tripping current and time simultaneously 7. Shutdown alarm function: After 3 minutes of operation, the instrument will let out a shutdown beep alarm 8. Power supply: Directly supplied by circuit under test (power supply 230V / 50Hz)

    €100,28

  • H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(White Light)-garmade.com

    H6133 12V-84V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(White Light)

    Features1. The product has reverse connection protection, it will not burn out if it is reversed 2. Lead-acid battery Lithium battery is universal and can be adjusted through the buttons on the back 3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will 4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm 5. All battery specifications and function selections are set through the buttons on the back, no electric soldering iron is requiredSpecification1. Work voltage: 10-100V 2. Work current: Less than 5mA 3. Sleep current: 12uA (12V test) 4. Display: LCD with backlit 5. Suitable for: 3-27 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V, 60V, 72V, 84V 6. Dimensions: 61.3 x 33.3 x 13.5mm 7. Mounting hole Size: 58.5 x 28.5mm 8. Wire Length: 30cm

    €7,98

  • H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)-garmade.com

    H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Blue Light)

    Features1. Monitoring the battery power percentage by this mini tester. 2. Easy to read the value in dark environment with the backlight. 3. Suitable for testing 12V/24V/36V/48V lead acid battery, ternary lithium battery, polymer lithium-ion battery, 3-15 series lithium-ion battery, storage battery, water battery, etc.. 4. Designed to test the voltage, current and capacity of battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. 5. Widely used for cars, motorcycles, scooters, bikes, power bank, test equipment, etc.1. Work voltage: 5-70V 2. Work current: 3-6mA 3. Display: HTN LCD with backlit 4. Suitable for: 3-15 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V 5. Dimensions: 43.3 x 23.6mm 6. Mounting hole Size: 40.8 x 20.8mm 7. Wire Length: 30cm

    €7,82

  • H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)-garmade.com

    H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(Green Light)

    Features1. Monitoring the battery power percentage by this mini tester. 2. Easy to read the value in dark environment with the backlight. 3. Suitable for testing 12V/24V/36V/48V lead acid battery, ternary lithium battery, polymer lithium-ion battery, 3-15 series lithium-ion battery, storage battery, water battery, etc.. 4. Designed to test the voltage, current and capacity of battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. 5. Widely used for cars, motorcycles, scooters, bikes, power bank, test equipment, etc.1. Work voltage: 5-70V 2. Work current: 3-6mA 3. Display: HTN LCD with backlit 4. Suitable for: 3-15 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V 5. Dimensions: 43.3 x 23.6mm 6. Mounting hole Size: 40.8 x 20.8mm 7. Wire Length: 30cm

    €7,82

  • H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(White Light)-garmade.com

    H5 12V-48V Lead-acid Battery Voltage Tester Percentage Voltmeter Gauge Lithium Battery Status Monitor(White Light)

    Features1. Monitoring the battery power percentage by this mini tester. 2. Easy to read the value in dark environment with the backlight. 3. Suitable for testing 12V/24V/36V/48V lead acid battery, ternary lithium battery, polymer lithium-ion battery, 3-15 series lithium-ion battery, storage battery, water battery, etc.. 4. Designed to test the voltage, current and capacity of battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. 5. Widely used for cars, motorcycles, scooters, bikes, power bank, test equipment, etc.1. Work voltage: 5-70V 2. Work current: 3-6mA 3. Display: HTN LCD with backlit 4. Suitable for: 3-15 x 3.7V Lithium Batteries; Lead Acid Batteries 12V, 24V, 36V, 48V 5. Dimensions: 43.3 x 23.6mm 6. Mounting hole Size: 40.8 x 20.8mm 7. Wire Length: 30cm

    €7,82

Login

Forgot your password?

Don't have an account yet?
Create account