DJI FPV Series

1. Use soft silicone material to prevent foreign objects from bumping or scratching the body. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. Surface oil spraying, beautiful and generous, comfortable to the touch. 4. High quality safety lanyard, comfortable to wear, firm and durable, safer to use. 5. Easy to disassemble and install. 6. Reasonable hole design, does not affect the use and flight control 7. Handle anti-slip texture design, comfortable grip is not easy to fall Parameters:1. Material: silicone2. Net weight: 31.7g (protective cover), 46.9g (silicone cover + lanyard)3. Product size: 16 x 4.6 x 3cm (protective sleeve), 57 x 2cm (lanyard)4. Note: Remote controller, motion controller are not included.

Read more less

1. Use soft silicone material to prevent foreign objects from bumping or scratching the body. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. Surface oil spraying, beautiful and generous, comfortable to the touch. 4. High quality safety lanyard, comfortable to wear, firm and durable, safer to use. 5. Easy to disassemble and install. 6. Reasonable hole design, does not affect the use and flight control 7. Handle anti-slip texture design, comfortable grip is not easy to fall Parameters:1. Material: silicone2. Net weight: 31.7g (protective cover), 46.9g (silicone cover + lanyard)3. Product size: 16 x 4.6 x 3cm (protective sleeve), 57 x 2cm (lanyard)4. Note: Remote controller, motion controller are not included.

Read more less

1. Large capacity, very practical and convenient to use. Durable and wear-resistant, sturdy enough.2. Pre-cut foam holds everything in place to prevent scratches, collisions and drops.3. An adjustable shoulder strap and a side handle make it easy to carry the case in two ways. The adjustable padded shoulder straps are designed to take the pressure off your shoulders.4. Each part has a separate internal space. Keep your flying machine safe with sturdy high-density foam.5. Versatile enough to be used as a general storage backpack on the go.6. High quality hardware zipper, high density waterproof nylon fabric.7. Compatibility: Suitable for DJI FPV Combo8. Material: EVA lining + nylon fabric9. Product size: 390 x 290 x 170mm10. Product weight: about 996g

Read more less

1. Use soft silicone material to prevent foreign objects from bumping or scratching the body. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. Surface oil spraying, beautiful and generous, comfortable to the touch. 4. High quality safety lanyard, comfortable to wear, firm and durable, safer to use. 5. Easy to disassemble and install. 6. Reasonable hole design, does not affect the use and flight control 7. Handle anti-slip texture design, comfortable grip is not easy to fall Parameters:1. Material: silicone2. Net weight: 31.7g (protective cover), 46.9g (silicone cover + lanyard)3. Product size: 16 x 4.6 x 3cm (protective sleeve), 57 x 2cm (lanyard)4. Note: Remote controller, motion controller are not included.

Read more less

1. Use soft silicone material to prevent foreign objects from bumping or scratching the body. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. Surface oil spraying, beautiful and generous, comfortable to the touch. 4. High quality safety lanyard, comfortable to wear, firm and durable, safer to use. 5. Easy to disassemble and install. 6. Reasonable hole design, does not affect the use and flight control 7. Handle anti-slip texture design, comfortable grip is not easy to fall Parameters:1. Material: silicone2. Net weight: 31.7g (protective cover), 46.9g (silicone cover + lanyard)3. Product size: 16 x 4.6 x 3cm (protective sleeve), 57 x 2cm (lanyard)4. Note: Remote controller, motion controller are not included.

Read more less

1. Compatible with a variety of GoPro action camera series, POCKET 2/1, action camera series, Fimi Palm 2/1, OSMO ACTION, searchlight, fill light, etc.2. The screw is fixed and the buckle is hooked tightly to the heat dissipation hole of the fuselage, so that it will not fall when violently bumping3. Lined with sponge strips to protect the fuselage from scratches4. Triangular design, more stable5. Equipped with thumb screws, easy to disassemble and assemble6. Product size: 7 x 7 x 2 cm7. Product net weight: 20.6 grams

Read more less

1. Easy to disassemble and assemble, users can replace it by themselves.2. Lightweight and durable, not easy to deform, no additional burden on the flight.3. Compatible products: suitable for DJI FPV aircraft4. Material: PC material5. Packing list:-DJI FPV Aircraft Top Shell (Transparent Gray) x 1-DJI FPV Aircraft Top Shell (Aurora Green) x 1

Read more less

1. It is easy to disassemble and assemble, and users can replace it by themselves.2. Long service life and easy installation.3. Made of high quality material, reliable and durable.4. Compatible products: suitable for DJI FPV aircraft5. Packing list: DJI FPV aircraft front legs (pair) × 1

Read more less

1. Modular disassembly and assembly, lightweight design2. It can effectively protect the camera lens when flying through3. The metal protective cover bracket, the tempered glass protective lens and the glass lens are all detachable and replaceable4. Reusable camera screws fix the metal bracket on the middle frame5. Reminder: Only the two screws on the camera that have not been coated with anti-tamper adhesive can be removed. If you remove other screws that have been coated with anti-tamper adhesive, the warranty will not be granted6. Compatible products: suitable for DJI FPV digital image transmission system camera module7. Material: metal bracket, aluminum alloy CNC and oxidation sandblasting8. Corning lens: 23.8 x 23.8 x 0.8mm9. Dimensions: 25 x 25 x 12.7mmpacking list-1 x lens protection bracket-2 x lens protection glass

Read more less

1. MMCX to SMA conversion cable, connecting for DJI FPV air unit and the antenna (SMA head) for the air unit2. The SMA head of this product is an external threaded internal needle3. MMCX straight/elbow: SMA are standard parts, the length is 83mm4. Compatible products: suitable for DJI FPV air system5. Packing list: adapter cable x 2

Read more less

1. MMCX to SMA conversion cable, connecting for DJI FPV air unit and the antenna (SMA head) for the air unit2. The SMA head of this product is an external threaded internal needle3. MMCX straight/elbow: SMA are standard parts, the length is 83mm4. Compatible products: suitable for DJI FPV air system5. Packing list: adapter cable x 2

Read more less

1. 150 degrees wide angle of view to present the picture, 4K/60fps shooting, clear records, RockSteady stabilization support, to bring a stable and smooth FPV aerial photography experience 2. High-definition and low-latency digital image transmission, dual-band adaptive switching, stable signal transmission and reception, smooth flight 3. Support emergency brake hovering, with intelligent return, low battery return, forward-looking and downward-looking obstacle detection and other functions, safety and security 4. Can be used with DJI FPV flight glasses V2 and DJI FPV remote control 5. High maneuverability, progressive flight gear 6. Support 2.4GHz/5.8GHz dual-band adaptive switching, image transfer bit rate up to 50 Mbps, strong anti-interference ability, effectively reduce screen lag and dragging shadow 7. 4 antenna design, signal transmission stability 8. Camera main camera pixel number: 12 million 9. Perception system: real-time image transmission quality 810p 10. Aircraft battery capacity: 44.4Wh (Not included battery) 11. Flight time: up to 20 minutes 12. Wind speed: up to 6 wind 13. Image format: JPEG 14. Airframe weight: about 795g 15. Note: only the drone is included, no other accessories

Read more less

1. Specially designed for FPV traversing machine fun, a set of products can unlock a variety of ways to play 2. Detachable splicing design, which can be played on a single piece or combined 3. 210D+ memory steel wire material, foldable, easy to carry and store 4. Size: 60cm inner diameter, 85cm outer diameter, 33cm round after folding 5. Weight: 800g

Read more less

1. Made of polyester + elastic band, it is stretchable, the adjustment range is about 13-22cm, the head width is 3.5cm, and it is comfortable to wear. 2. Versatility: Compatible with most VR glasses on the market 3. Simple and practical, easy to disassemble. 4. Durable, strong bearing capacity, fine processing 5. Good elasticity, wear-resistant and beautiful

Read more less

1. Made of polyester + elastic band, it is stretchable, the adjustment range is about 13-22cm, the head width is 3.5cm, and it is comfortable to wear. 2. Versatility: Compatible with most VR glasses on the market 3. Simple and practical, easy to disassemble. 4. Durable, strong bearing capacity, fine processing 5. Good elasticity, wear-resistant and beautiful

Read more less

1. Anti-light leakage composite sponge mask, soft material, high fit to the face, can effectively block light and provide a comfortable wearing experience.2. The installation is simple and convenient, and the overall structure is optimized (the plastic bottom frame is removed, and the original design has a hard plastic bottom frame, which causes tenderness on the face profile)3. The skin-friendly and soft material is used to reduce the tenderness on both sides of the forehead when wearing it. The forehead of the mask is widened and heightened, and the lower cheek is thickened and heightened to improve the stability and comfort of wearing and effectively prevent light leakage4. The skin-friendly mesh fabric used in the mask is more coordinated with the VR glasses.5. Material: Foam composite sponge, skin-friendly Lycra mesh fabric6. Weight: about 15 grams7. Compatible models: for DJI Goggles 28. Note: The product is only a mask, not including VR glasses

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced surface design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience

Read more less

1. Anti-light leakage composite sponge mask, soft material, high fit to the face, can effectively block light and provide a comfortable wearing experience.2. The installation is simple and convenient, and the overall structure is optimized (the plastic bottom frame is removed, and the original design has a hard plastic bottom frame, which causes tenderness on the face profile)3. The skin-friendly and soft material is used to reduce the tenderness on both sides of the forehead when wearing it. The forehead of the mask is widened and heightened, and the lower cheek is thickened and heightened to improve the stability and comfort of wearing and effectively prevent light leakage4. The skin-friendly mesh fabric used in the mask is more coordinated with the VR glasses.5. Material: Foam composite sponge, skin-friendly Lycra mesh fabric6. Weight: about 15 grams7. Compatible models: for DJI Goggles 28. Note: The product is only a mask, not including VR glasses

Read more less

Silicone Case1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced surface design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experienceNeck Strap1. Made of ABS and nylon material, wear-resistant and durable, prevent deformation 2. Solve the problem that the remote control cannot use the strap without a strap hole. Easily put on a lanyard to free your hands 3. Double hanging buckle, more balanced, more stable and safe, anti-falling provides extra protection for the remote control, 4. High-quality metal hanging buckle, easy to use. 5. Will not affect the operation of the remote control, will not affect the phone clip, will not block the screen of the phoneFeatures1. Dual-Hook Remote control embedded bracket x 1 2. Lanyard x 1 3. Silicone Case x 1

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced surface design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience

Read more less

1. Anti-light leakage composite sponge mask, soft material, high fit to the face, can effectively block light and provide a comfortable wearing experience.2. The installation is simple and convenient, and the overall structure is optimized (the plastic bottom frame is removed, and the original design has a hard plastic bottom frame, which causes tenderness on the face profile)3. The skin-friendly and soft material is used to reduce the tenderness on both sides of the forehead when wearing it. The forehead of the mask is widened and heightened, and the lower cheek is thickened and heightened to improve the stability and comfort of wearing and effectively prevent light leakage4. The skin-friendly mesh fabric used in the mask is more coordinated with the VR glasses.5. Material: Foam composite sponge, skin-friendly Lycra mesh fabric6. Weight: about 15 grams7. Compatible models: for DJI Goggles 28. Note: The product is only a mask, not including VR glasses

Read more less

1. Anti-light leakage composite sponge mask, soft material, high fit to the face, can effectively block light and provide a comfortable wearing experience.2. The installation is simple and convenient, and the overall structure is optimized (the plastic bottom frame is removed, and the original design has a hard plastic bottom frame, which causes tenderness on the face profile)3. The skin-friendly and soft material is used to reduce the tenderness on both sides of the forehead when wearing it. The forehead of the mask is widened and heightened, and the lower cheek is thickened and heightened to improve the stability and comfort of wearing and effectively prevent light leakage4. The skin-friendly mesh fabric used in the mask is more coordinated with the VR glasses.5. Material: Foam composite sponge, skin-friendly Lycra mesh fabric6. Weight: about 15 grams7. Compatible models: for DJI Goggles 28. Note: The product is only a mask, not including VR glasses

Read more less

1. The material of the mask is soft and fits well on the face2. It can effectively block light and provide a comfortable wearing experience.3. Compatible products: suitable for DJI Goggles Integra4. Weight: 22 grams5. Packing list: Goggles Integra foam padding × 1

Read more less

1. The 5.8G RX PORT 2.0 is designed to be fixed with the FPV goggles headband ring screw, and is completely non-destructively installed on the side of the DJI goggles, so that you can use Fat Shark or various third-party Fat Shark interface 5.8G receiver systems, Conveniently transfer video and audio signals to the high-quality screen of FPV flying glasses for viewing or recording2. Dimensions: 48 x 28 x 12mm3. Weight: 10g (excluding the adapter cable)4. Power input: 2S-4S (DC5.5 x 2.1)5. Internal voltage: 5V 3A (with pad for output)6. Power output: 2S-4S (DC5.5 x 2.1)7. Signal input: Standard Fat Shark receiver port8. Including third-party receivers: Reaxacc Furious, etc.9. Signal output: standard audio/videoappendix: Adapter mounting block and screw x 1Audio and video cable x 1Power cable x 1

Read more less

1. For DJI FPV Goggles V1 V22. The metal quick-release shell for flight glasses receiver play module3. Can adapt to receiver module 3.0 and 3.0 PLUS with switch4. CNC fine processing, anodizing treatment, quick disassembly and assembly.5. Material: aluminum6. Dimensions: 58 x 36 x 25mm7. Weight: 36 gramsReminder: This product does not contain the red fat shark receiver case, it is for display purposes only

Read more less

1. The appearance and structure of this 3D skin-friendly mask have been optimized, and the bridge of the nose is equipped with an anti-leakage pad that can be cut freely and installed in two ways2. The inside of the mask is made of multi-layer sponge inner core, and the outer layer is made of skin-friendly Lycra fabric, which is made of environmentally friendly new technology, which effectively prevents light leakage and improves the overall wearing comfort3. Non-destructive installation, increase the value of glasses and individual needs.4. The headband is made of Lycra sports skin-friendly elastic fabric, the surface of the headband is perforated, breathable, sweat-resistant and washable5. Compatible products: suitable for DJI FPV Goggles V1 V26. Product net weight: 20g (weight of single eye pad)

Read more less

1. The appearance and structure of this 3D skin-friendly mask have been optimized, and the bridge of the nose is equipped with an anti-leakage pad that can be cut freely and installed in two ways2. The inside of the mask is made of multi-layer sponge inner core, and the outer layer is made of skin-friendly Lycra fabric, which is made of environmentally friendly new technology, which effectively prevents light leakage and improves the overall wearing comfort3. Non-destructive installation, increase the value of glasses and individual needs.4. The headband is made of Lycra sports skin-friendly elastic fabric, the surface of the headband is perforated, breathable, sweat-resistant and washable5. Compatible products: suitable for DJI FPV Goggles V1 V26. Product net weight: 20g (weight of single eye pad)

Read more less

Neck Strap1. Made of ABS and nylon material, wear-resistant and durable, prevent deformation 2. Solve the problem that the remote control cannot use the strap without a strap hole. Easily put on a lanyard to free your hands 3. Double hanging buckle, more balanced, more stable and safe, anti-falling provides extra protection for the remote control, 4. High-quality metal hanging buckle, easy to use. 5. Will not affect the operation of the remote control, will not affect the phone clip, will not block the screen of the phoneSilicone Case1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body 2. Reinforced surface design, can be kneaded at will without deformation 3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable 4. Easy to remove and install 5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control 6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experienceFeatures1. Dual-Hook Remote control embedded bracket x 1 2. Lanyard x 1 3. Silicone Case x 1

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. It is made of PVC material, which can be pasted repeatedly, and there is no glue residue when tearing off, which is more durable2. Full of fun, fast flight design: a variety of different styles of pattern stickers are available, bringing different flying experiences3. Fit the fuselage to ensure that the sticker fits with the fuselage without losing the appearance4. No glue residue, can be pasted repeatedly5. For DJI FPV6. Material: PVC7. Note: The product only contains stickers, not including drones

Read more less

1. Power supply for flying glasses, small size, with built-in battery indicator2. When DJI Goggles 2 is used with DJI Avata aircraft, it can display the battery power in real time, and the battery life is about 2 hours when fully charged3. Capacity: 1800mAh4. Battery life: about 2 hours5. Voltage: 7-9V, 1.5A6. Type: Li-ion7. Chemical system: LiNiMnCoO28. Energy: 18 Wh9. Charging ambient temperature: 0-45 degrees Celsius10. Charging power: 12.6W (5V 2A, 9V 1.4A)11. Compatible products: for DJI Goggles 2Packing list:-Battery x 1-Type-C/USB-C power cable x 1

Read more less

1. Intelligent flight battery, providing up to 20 minutes of strong battery life.2. Built-in intelligent battery management system, real-time monitoring and feedback of battery status, abundant energy, intelligent protection, allowing you to enjoy flying.3. Battery capacity: 2000mAh4. Battery life: 20 minutes5. Nominal voltage: 22.2 V6. Charging limit voltage: 25.2 V7. Battery type: LiPo 6S8. Energy: 44.4 Wh0.5C9. Discharge rate: typical value 10C10. Charging ambient temperature: 5 to 40 degrees Celsius11. Charging power: 90 W12. Compatible products: suitable for DJI FPV aircraftPacking list:-Smart flight battery x 1

Read more less

1. Personalized pattern, full of sense of design. Original design patterns, clear and bright, make your flying glasses eye-catching enough 2. Soft and elastic, comfortable to wear, using high-quality elastic band, comfortable and durable. 3. There is a battery fixing strap, so you dont have to worry about nowhere to put the battery of the glasses during the flight. 4. The length is adjustable and elastically stretchable. The adjustable buckle can freely adjust the length, and the elastic band is elastic, so you can control it according to your head circumference. 5. Hook and loop fastener adhesive, strong grip and durable 6. The thoughtful winding design can neatly fix the power supply wire on the headband to prevent the winding from interfering with the flight 7. Applicable models: for DJI Avata / Goggles 2 / FPV Goggles V2 8. Material: elastic band 9. Net weight: 32g 10. Gross weight: 36g

Read more less

1. Personalized pattern, full of sense of design. Original design patterns, clear and bright, make your flying glasses eye-catching enough 2. Soft and elastic, comfortable to wear, using high-quality elastic band, comfortable and durable. 3. There is a battery fixing strap, so you dont have to worry about nowhere to put the battery of the glasses during the flight. 4. The length is adjustable and elastically stretchable. The adjustable buckle can freely adjust the length, and the elastic band is elastic, so you can control it according to your head circumference. 5. Hook and loop fastener adhesive, strong grip and durable 6. The thoughtful winding design can neatly fix the power supply wire on the headband to prevent the winding from interfering with the flight 7. Applicable models: for DJI Avata / Goggles 2 / FPV Goggles V2 8. Material: elastic band 9. Net weight: 32g 10. Gross weight: 36g

Read more less

1. Personalized pattern, full of sense of design. Original design patterns, clear and bright, make your flying glasses eye-catching enough 2. Soft and elastic, comfortable to wear, using high-quality elastic band, comfortable and durable. 3. There is a battery fixing strap, so you dont have to worry about nowhere to put the battery of the glasses during the flight. 4. The length is adjustable and elastically stretchable. The adjustable buckle can freely adjust the length, and the elastic band is elastic, so you can control it according to your head circumference. 5. Hook and loop fastener adhesive, strong grip and durable 6. The thoughtful winding design can neatly fix the power supply wire on the headband to prevent the winding from interfering with the flight 7. Applicable models: for DJI Avata / Goggles 2 / FPV Goggles V2 8. Material: elastic band 9. Net weight: 32g 10. Gross weight: 36g

Read more less

1. PC hard shell front face, environmentally friendly and strong, nylon back, wear-resistant and scratch-resistant, water-repellent2. Large space, upper and lower layer design, can hold drone/battery/remote controller/motion controller/data cable/propeller/Goggles 2 or FPV Goggles V23. U-shaped three-dimensional ventilated back, effectively protecting the spine, comfortable to carry4. Material: PC+Nylon5. Inside: EVA lining6. Dimensions: 30 x 13 x 40cm7. Weight: 1397.5 grams

Read more less

1. Practical and Large Capacity: It can hold Avata drone, Goggles 2/FPV Goggles V2, motion controller, battery, charger and other small accessories.2. Professional waterproof, the safety box is closed and sealed, which can effectively avoid water leakage when splashing or sprinkling water.3. High strength, drop resistance, compression resistance, corrosion resistance, high and low temperature resistance. It adopts super impact-resistant hard material, which is resistant to falling, pressure, not easy to deform, and has strong bearing capacity.4. Shockproof EVA inner support, precise mold opening, closed storage, to protect your equipment.5. Comfortable soft rubber handle, comfortable to touch, non-slip and wear-resistant, relieve hand pressure.6. Cabinet material: PP7. Lining material: EVA8. Net weight: 2290g9. Dimensions: 440 x 36 x 155mmPacking list: 1 travel case, 1 shoulder strap, drone and other accessories are not included.

Read more less

1. Practical and Large Capacity: It can hold Avata drone, Goggles 2/FPV Goggles V2, motion controller, battery, charger and other small accessories.2. Professional waterproof, the safety box is closed and sealed, which can effectively avoid water leakage when splashing or sprinkling water.3. High strength, drop resistance, compression resistance, corrosion resistance, high and low temperature resistance. It adopts super impact-resistant hard material, which is resistant to falling, pressure, not easy to deform, and has strong bearing capacity.4. Shockproof EVA inner support, precise mold opening, closed storage, to protect your equipment.5. Comfortable soft rubber handle, comfortable to touch, non-slip and wear-resistant, relieve hand pressure.6. Cabinet material: PP7. Lining material: EVA8. Net weight: 2290g9. Dimensions: 440 x 36 x 155mmPacking list: 1 travel case, 1 shoulder strap, drone and other accessories are not included.

Read more less

1. PC hard shell front face, environmentally friendly and strong, nylon back, wear-resistant and scratch-resistant, water-repellent2. Large space, upper and lower layer design, can hold drone/battery/remote controller/motion controller/data cable/propeller/Goggles 2 or FPV Goggles V23. U-shaped three-dimensional ventilated back, effectively protecting the spine, comfortable to carry4. Material: PC+Nylon5. Inside: EVA lining6. Dimensions: 30 x 13 x 40cm7. Weight: 1397.5 grams

Read more less

1. Strengthen the design of tensile glue, which can be kneaded at will without collapse or deformation. 2. Anti-scratch, anti-drop and dust-proof, soft silicone protective cover to prevent foreign objects from colliding and scratching the remote control 3. Anti-slip texture design, when flying outdoors, it can effectively prevent hands from sweating and slipping, making it safer and more comfortable to hold. 4. Reserve antenna holes, which will not affect the signal. 5. Suitable for DJI Air 3/ RC2 remote control with screen

Read more less

1. Suitable for DJI O3 Air Unit camera CNC bracket2. Easy to install, convenient and fast3. Material: aluminum4. Dimensions: 55 x 35 x 60mm5. Weight: 37g (excluding air unit)Packing list:Left CNC housing x 1Right CNC housing x 1Screw M2 x 28mm x 3Screw M2 x 18mm x 1Air unit extension cord x 2Thermal conductive silicone x 1

Read more less

1. PC hard shell front, environmentally friendly and strong, nylon back, wear-resistant and scratch-resistant, splash-proof2. Large space, upper and lower layered design, can be installed under the drone / battery / remote control / motion controller / data line / paddle / Goggles 2 or FPV Goggles V23. U-shaped three-dimensional ventilation back, effective protection of the spine, comfortable back4. Material: PC + nylon5. Internal: EVA lining6. Size: 34 x 16 x 46cm7. Weight: 1650g

Read more less

1. PC hard shell front, environmentally friendly and strong, nylon back, wear-resistant and scratch-resistant, splash-proof2. Large space, upper and lower layered design, can be installed under the drone / battery / remote control / motion controller / data line / paddle / Goggles 2 or FPV Goggles V23. U-shaped three-dimensional ventilation back, effective protection of the spine, comfortable back4. Material: PC + nylon5. Internal: EVA lining6. Size: 34 x 16 x 46cm7. Weight: 1650g

Read more less

1. Material: Fireproof material2. Weight: Bag for glasses 1 battery about 24 grams, bag for glasses 2 batteries about 37 grams, bag for drone battery about 47 grams, bag for drone 2 batteries about 78 grams, bag for drone 3 batteries about 111 grams3. Dimensions: Bag for glasses 1 battery about 6.1x4.2x8.8 cm, bag for glasses 2 batteries about 8.8x4.5x9.1 cm, bag for drone 1 battery about 10.3x5.5x11.1 cm, bag for drone 2 batteries are about 11.7x9.7x11.1 cm, bag for drone 3 batteries are about 17.4x9.7x11.1 cm4. Application: Suitable for DJI FPV aircraft/FPV goggles V2 battery5. Features: Adopting adhesive sealing design, convenient and quick to use, safe storage of batteries, portable travel, high temperature resistance, radiation and explosion protection, durable6. Note: Only the storage bag, without the battery in the picture

Read more less

1. Material: Leather fabric + flannel + elastic band2. Weight: About 13 grams3. Size: About 14.6x5.9 cm4. Application: Suitable for DJI FPV flight glasses V25. Note: Only the storage bag, without other items in the pictureFeatures:1. It can store 4 antennas and one memory card, which is light and convenient2. Effectively protect the glasses to avoid damage to the lenses caused by strong light, dust, and scratches3. Matte leather fabric + cushioning stereotyped sponge sandwich, comfortable and soft hand feeling4. The back flannel material prevents the lens from scratching5. Elastic elastic band to stably store the antenna and memory card6. Intimate handle design, easy to

Read more less

1. Length: 15/30 cm2. Weight: 15 cm long about 6 grams, 30 cm long about 8 grams3. Specifications: TYPE-C to 8Pin/TYPE-C to Android/TYPE-C to TYPE-C4. Application: suitable for DJI Mavic Air 2S remote control / FPV flight glasses V2 / Mavic Mini 2 remote control / Mavic Air 2 remote control / Pocket 2 / Osmo Pocket gimbal camera5. Features:The data cable can be stored in the remote control, easy to use, stable connection, fast transmission, clear picture quality6. Note: When using the data cable to connect the phone/tablet and the pocket camera, the original data adapter needs to be removed, otherwise the screen cannot be displayed on the phone7. Note: Only the data cable, without other items in the picture

Read more less

1. Length: 15/30 cm2. Weight: 15 cm long about 6 grams, 30 cm long about 8 grams3. Specifications: TYPE-C to 8Pin/TYPE-C to Android/TYPE-C to TYPE-C4. Application: suitable for DJI Mavic Air 2S remote control / FPV flight glasses V2 / Mavic Mini 2 remote control / Mavic Air 2 remote control / Pocket 2 / Osmo Pocket gimbal camera5. Features:The data cable can be stored in the remote control, easy to use, stable connection, fast transmission, clear picture quality6. Note: When using the data cable to connect the phone/tablet and the pocket camera, the original data adapter needs to be removed, otherwise the screen cannot be displayed on the phone7. Note: Only the data cable, without other items in the picture

Read more less

1. Length: 15/30 cm2. Weight: 15 cm long about 6 grams, 30 cm long about 8 grams3. Specifications: TYPE-C to 8Pin/TYPE-C to Android/TYPE-C to TYPE-C4. Application: suitable for DJI Mavic Air 2S remote control / FPV flight glasses V2 / Mavic Mini 2 remote control / Mavic Air 2 remote control / Pocket 2 / Osmo Pocket gimbal camera5. Features:The data cable can be stored in the remote control, easy to use, stable connection, fast transmission, clear picture quality6. Note: When using the data cable to connect the phone/tablet and the pocket camera, the original data adapter needs to be removed, otherwise the screen cannot be displayed on the phone7. Note: Only the data cable, without other items in the picture

Read more less