Bestselling Products

1. 15W fast charging, automatic alignment2. Two circles of strong neodymium magnets for unparalleled magnetic strength3. Crystal clear edge for better light effect4. Easy to operate, place and retrieve your phone in seconds5. Material: ABS+PC6. Input: 5V=2A 9V=2A 12V=1.5A7. Output: 5W/7.5W/10W/15W (max)8. Input port: Type-C9. Applicable phone size: 4.7-6.7 inch

Read more less

1.The holder grips your device tightly and prevents it falling and damage,Simple design,can adjustable angle and height,easy to install 2.Adjustable and fits firmly in the cup holder for car, truck or SUV,Base expands to fit any vehicle cup holder; no suction or adhesive required 3.Adjustable Angle design,360-degree rotatable holder provides you with the viewing angle, enhancing your safe driving experience 4.Fit for i-Phone 12 11 XR/XS Max/XS/X/8/8 Plus/7/7 Plus, for Sam-sung S10/S10 Plus/S9/S8 Edge/Note 9, for Hua-wei mobile phones and More,You could use your cup holders in car, truck, RV, SUV,boat, golf cart, etc 5.Adjustable to hold for all types of 3.5 to 6.7 inch smart phone, GPS/ PND & PSP devices

Read more less

1. Smart fast charging, support dual USB charging at the same time2. Support Bluetooth music/TF card/U disk playback, support Bluetooth hands-free communication3. LED screen, can display frequency, voltage display4. Reinforced anti-slip pad design, the car charger fits closely with the cigarette hole, and the shockproof effect is good5. Material: ABS+PC, electronic components6. Product features: one-button hands-free calling, Bluetooth music playback, dual USB 3A charging, TF card/U disk music playback, FM FM transmission7.Using voltage: DC12-24V8. Output current: 3A9. Bluetooth version: 5.010.FM frequency: 87.5-108MHz11. Audio format: MP3/WAM12. Signal to noise ratio: 85db (FM: 65db)13. Bluetooth distance: 5 meters14.FM transmission distance: 5 meters15. Dimensions: 8 x 4.5 x 1.5 cm16. Product net weight: 40 grams

Read more less

Parameters1. Material: face shell + dumb oil + acrylic lens2. Input: 5V/2A, 9V/2A3. Power: 5W / 7.5W / 10W / 15W (Max)4. Number of coils: 25. Input port: Type-C6. Working distance: about 6mm7. Working frequency: 110-205KHz8. Charging efficiency: 70%9. Working temperature: -20 degrees Celsius - 45 degrees Celsius10. Fast charging protocol: QC2.0/3.0Features1. The silent fan dissipates heat, and the charging efficiency in the car environment is increased by 30%.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. Fully automatic FOD coil induction car wireless charging, stepping silent motor.4. Built-in farad capacitor, the phone can be removed within 15 minutes of power failure.5. Support Samsung / Huawei / LG 10W / Apple 7.5W / Google 15W and other high-power charging.6. The foldable mobile phone can be charged vertically or horizontally, and it is more convenient to use the car map for navigation.7. Easy to assemble and install without blocking the driving sight.8. Packing list: - 1mType C cable x 1- Air outlet bracket x 1- Suction cup holder x 1- 3m suction cup auxiliary sticker x 1- Unisex instruction manual x 1- Neutral color box packaging x 1

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. It supports one-handed pick-and-place, and it can be clamped as soon as it is placed, and it can be stable and not easy to drop on bumpy roads.4. With a built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.5. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

Parameters 1. Product material: ABS+silica gel 2. Product size: 151x85x65mm 3. Product weight: 152g 4. Applicable mobile phone size: 130-170mm 5. Power: 5W / 7.5W / 10W 6. Implementation standard: Qi 1.2.4 7. Input: 9V/2A, 5V/2A 8. Output: 9V/1.2A, 5V/1A 9. Input port: USB-C / Type-C 10. Working distance: about 6mm 11. Working frequency: 110-205KHz 12. Charging efficiency: 70% 13. Working temperature: -20 degrees Celsius - 45 degrees Celsius 14. Automatic sensing method: FOD sensor / infrared sensor 15. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection 16. Installation method: clamp-on / suction cup 17. Fixed position: car air outlet Features 1. Horizontal smart navigation bracket, can hold folding screen mobile phones or other large screen mobile phones 2. Supports different angle adjustments, you can choose to adjust to your comfortable direction 3. The charging port is reserved and does not block the charging hole and mobile phone volume buttons, making it easy to operate. 4. It supports one-hand pick-up and placement, and it can be clamped as soon as it is placed. It can be stable and not easy to fall on bumpy roads. 5. Built-in multiple protection functions such as overcurrent, overvoltage, overtemperature, and short circuit to ensure safe and fast charging without damaging the machine.

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. It supports one-handed pick-and-place, and it can be clamped as soon as it is placed, and it can be stable and not easy to drop on bumpy roads.4. With a built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.5. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. Automatic FOD coil induction car wireless charging, stepping silent motor.4. Built-in farad capacitor, the phone can be removed within 15 minutes after power failure.5. Samsung Z Fold series mobile phones can be charged vertically or horizontally, and the car map navigation is more convenient.6. Built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.7. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. 3-axis locking structure, firmly grasping the rearview mirror.2. The connecting rod can be adjusted up or down in length, and can rotate 360 degrees in circular, without obstructing the driver view.3. Upgrade the spring phone clip to be compatible with 12-25.3cm phones or Tablet PC.4. Material: PC+silicone5. Weight: 251g

Read more less

1. Material: ABS+Silicone+N50 magnet2. Weight: 87g3. Installation method: car CD port4. Easy to install, plug and play5. One-handed pick and place, strong magnetic adsorption, put and suck, not easy to drop when encountering bumpy road conditions6. The built-in universal ball can be rotated 360 degrees, and the viewing angle can be adjusted at will. It can be used horizontally and vertically, and the navigation is more convenient7. Silicone pads are added to the contact points, which are shock-absorbing and non-slip, and will not hurt your car and mobile phone8. Applicable equipment: suitable for mobile phones of various sizes

Read more less

1.Smart Infrared Sensor Design: Automatic opening and clamping design for one-handed operation, making everything easier and safer. Simply place the phone inside the holder and the clip will close and provide a firm and stable hold. Touch the quick-release button on either side and the holder will rotate to level the screen. When your phone is fully charged, the wireless car charger will automatically power off and last the life of your phone's battery2.Qi Wireless Charger and Phone Holder: The 2-in-1 design combines the Qi wireless charger and the car phone holder in one device. The wireless car charger provides fast charging for your phone and keeps you free from cables and phone cases while driving.3.Strong Suction Cups and Adjustable Viewing Angle: You can install the wireless car charger holder multiple times, and it can be securely mounted on windshields, dashboards, and tables with strong suction cups. Full 360-degree rotation allows for optimal viewing angles and easier use of features, which is the safest way to access cell phone systems like GPS and phone4. Faster Charging: No need to remove the case when charging (most cases on the market, except for rough, uneven ones.). The car mount can hold all phones with 60-80mm width tightly, which is good for all QI-supported phones5.Product features: Over-current / over-temperature protection, CE / FCC / ROHS certification, Appearance patent certification, Touch sensor6. Built-in lithium battery: 200 mah

Read more less

1.Auto-Clip and One-Hand Operation: This car wireless charger is equipped with auto-sensing technology. When the phone is connected to the car mount, the two clips of the mount will automatically close and hold the phone; to release the phone, touch the top of the mount with your hand and the clips will automatically open, then you can take the phone out2.Fast Charging and Adjustable View: Qi wireless car charger supports safe and fast charging and reliable phone protection. It intelligently identifies wireless fast charging devices and intelligently adjusts the power between 5W/7.5W/10W/15W/20W/30W/40W/40W/5W/65W/75W/10W/120W/130W/150W. Note: We recommend you use a QC3.0 car charger adapter (not included) for fast charging, otherwise it may lead to intermittent charging3.Support Rotation: The 360-degree swivel mount provides the flexibility to choose to view your phone or GPS while driving. this means the view is not blocked and you get a view with the car wireless charger mount4.Wide Compatibility: The flexible clips and hooks, the phone's screen size can support almost all Qi phones from 4.5 to 6.7 inches, compatible with Huawei Mate 20 Pro, P30 Pro, Samsung Galaxy S22/S21/S20/S10/S10+, S9/9+, S8/8+, Note9, Note8, iPhone 14/ 14 Pro/14 Pro Max/13/13 Pro/13 Pro Max/12/12 Pro Max/11/11 Pro Max/Xs/Xs Max/XR/8/8 Plus, etc. 5.Product Features: Over-current / over-temperature protection, CE/FCC/ROHS certification, appearance patent certification, touch sensor6.Battery Capacity: 200mah

Read more less

1. Black technology nano materials.2. Fast curing within 10 minutes,no need to hold pressure.3. Multi purpose, able to permanently bond various materials. suited for smart phone, electronic equipment.4. After curing, the adhesive layer has good toughness, is not easy to break, and is resistant to aging and oil stains.5. The surface to be bonded does not require strict degreasing treatment.

Read more less

1. Input voltage: 3.7V2. Battery type: lithium battery, 350mAh3. The red light is on when charging, and the green light is on when charging4. Speed speed: 320r/min5. Manual torque: 3n.m, electric torque: 0.4-0.5N.M6. Full charge duration: 90 minutes, standby duration: 90 days

Read more less

1. Revolutionary updating of iCopy iPhone X-14 Series Face ID recovery and activation board 2. The activation board is compatible with previous iCopy devices, repairing Face ID is easy as changing an accessory, super friendly for beginners 3. Support a variety of flex cables with unlimited expansion 4. Flex cable is compatible with iPhone X Series, 11 Series, and 12 series, as, for other models, it keeps updating 5. This device supports QianLi is previous dot projector cable and X-14 series IC chipsets other models are being updated

Read more less

1. All-aluminum heating plate with uniform heating and stable performance 2. A heating platform that can meet the separation of PC and mobile phone screens within 17 inches 3. Unique special silicone pad, lip sealing ring super sealing 4. Porous design to meet the needs of various screen sizes 5. Built-in double air pump separator, single or double air pumps at the same time 6. Front panel design for simple, easy, and fast operation 7. Real-time adjustable and visible temperature, fast, convenient, and efficient 8. Large full aluminum heating plate for even heating and stable performance 9. This Vacuum LCD Separator with Vacuum Pump Built-in gets rid not only of the traditional fixture clamps or screws but of the heavy Vacuum Pump 10. Safety power system inside, avoiding the electric leakage problem 11. Anti-static body material prevents the LCD and the flex cable from being damaged by the static 12. Easy to operate, manual separating 13. Smooth metal plate to hold the touch screen without any damaged 14. Compatible with LCD or LED screen assembly 15. Power: 280W 16. Temperature range: 40~250 degrees centigrade 17. Package includes: - 1 x Screen separator machine - 1 x Power cable - 1 x Silicone pad

Read more less

About the product1. LCD screen and digitizer full assembly for GoPro Hero8 Black. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Camera lens for GoPro Hero9 Black. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Camera lens for GoPro Hero7 Black. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. Metal side cover replacement for GoPro HERO9 Black/HERO10 Black 2. Replace your broken or unworkable one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. The USB charging pass-through door with lid is specially designed for GoPro Hero11 Black mini, ensuring that the camera can be charged during long-term shooting. 2. While opening a hole at the interface to facilitate plugging and unplugging of the data cable, a closable warehouse door is added. 3. In daily storage and use, it can effectively prevent the intrusion of foreign objects from causing damage to the data interface. 4. Although this side cover can be closed, there is a slight gap in the closed part and cannot be waterproof. Do not use it for wading. 5. When using the data interface, there is no need to open the entire side cover, just open the closable door, and the inside of the body and the battery are not exposed. 6. Aluminum alloy material, duarble to use. 7. Lightweight, mini size, portable for vlogging.

Read more less

1. Suitable for Oculus Quest 2 VR joystick controller2. Tested for good performance3. Replace broken, worn or damaged parts.4. It will make your controller work properly again.5. Material: plastic + metal

Read more less

1. Suitable for Oculus Quest 2 VR headset2. Cable tested for good performance3. Replace broken, worn or damaged parts.4. It will make your controller work properly again.5. Material: plastic + metal

Read more less

1. The original adaptation degree is high2. Easy installation, convenient disassembly3. Used to replace damaged, wear or damage to the accessories4. Good test performance5. For Meta Oculus Quest 2

Read more less

1. Comfortable and durable2. Suitable for Meta / Oculus Quest. 23. Easy to use, convenient disassembly4. High temperature resistance5. Used to replace damaged, wear or damage to the lens6. Original adaptation degree is high

Read more less

1. L-shaped ventilation interface, good breathability can keep your face cool during high-intensity training.2. Good light blocking: ergonomic design to fit your face, you don't have to worry about light leakage anymore.3. Comfortable foam and PU, silicone: a fully immersive experience. The padded face pad is much better than others in reducing pressure. Soft and sweat-proof, the highly flexible sponge can be compressed to 0.3 inches thick, bringing you closer to the monitor for a better experience. Soft silicone won't tighten your nose even during long gaming sessions.4. Washable: PU and sponge, silicone material, can be scrubbed with water, should be dried in time after washing to prevent sharp objects from scratching and piercing.5. Material: sponge + ABS + PU + silicone6. Function: blackout, breathable7. Compatible: for Oculus Quest 2

Read more less

1. Replace broken, worn or damaged parts.2. Compatible models: For Oculus Quest 23. Tested good and ready to use4. Parts for repair, can be installed on your VR controller5. Material: plastic

Read more less

1. Replace broken, worn or damaged parts.2. Compatible models: For Oculus Quest 23. Tested good and ready to use4. Parts for repair, can be installed on your VR controller5. Material: plastic

Read more less

1. Replace broken, worn or damaged parts.2. Compatible models: For Meta Oculus Quest 2 VR3. Tested good and ready to use4. Parts for repairs that will get your VR headset working again5. Material: plastic

Read more less

1. Replace broken, worn or damaged parts.2. Compatible models: For Oculus Quest 23. Tested good and ready to use4. Parts for repair, can be installed on your VR controller5. Material: plastic

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the camera.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in camera. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement camera LCD display screen 2. Replace the old, broken, cracked, damaged one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

1. Replacement LCD connecting flex cable for Canon PowerShot G7 X Mark II.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. SD card slot replacement part.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement Thumb leather for Nikon D90. 2. Repair and fix your broken or unusable item with it. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. USB plug cover cap replacement part.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. SD card slot replacement part.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement camera LCD screen outer lens.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement camera LCD screen outer lens.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less

1. Replacement camera LCD screen outer lens.2. Repair and fix your broken or unusable item with it.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your camera that you may cause during the changing of replacement parts.

Read more less