Test Equipment

Pure carbon monoxide (CO) is colorless, odorless, and non-irritant gas: molecular weight: 28. 01; Density: 1. 250g/ l; freezing point: - 207C; boiling point: - 190C. Its solubility in water is quite low, but it dissolves instantly in ammonia water. Air mixed explosion limit is between 12. 5% and 74%. After entering human body, carbon monoxide will combine with hemoglobin in blood, making the hemoglobin not able to combine with oxygen, which causes oxygen deficit to organism organization, leading to death from suffocation. Therefore, carbon monoxide is toxic, and is colorless, odorless, and tasteless, which is easy to be ignored and thus causing poisoning. The carbon monoxide detector can detect the concentration of carbon monoxide gas, and observe the value of carbon monoxide gas concentration at any time. It has a very clear large LCD screen, sound and light alarm prompts, to ensure that dangerous gases can be detected under very unfavorable working environments and prompt operators to prevent them in time. It is widely used in petroleum, chemical, coal, metallurgy, papermaking, fire fighting, municipal administration, telecommunications, food, textile and other industries. 1. Gas Tested: CO in the air 2. Measuring Range: 0-1000ppm 3. Resolution: 1ppm 4. Minimum Reading: 1ppm 5. Basic Error: +/-5%(f.s), +/-10ppm 6. Response Time: 60 seconds 7. Sensor Type: Electrochemical CO sensor

Read more less

1. Monitor the current value of the active power 2. Monitor the current voltage /current / frequency 3. Record the total time consumption 4. Record the total electricity consumption 5. Calculate CO2 emissions 6. Power factor detection 7. Set the alarm threshold load 8. Large LCD display

Read more less

About the productOut of clusters of humidity and temperature instruments, this low power consumption Data-Logger combines the functions of signal-sampling, display, storage and analysis, widely be applied in the industries of medicine, food processing, agricultural research, laboratory, electronics, air-conditioning, weather service, archives management, archaeology study, fiber manufacturing and cold chain logistics, because this device can provide just-in-time solution of environment-monitoring, alerting and recording.Features1. In measurement - With high sensitivity detector to pick up temperature and humidity with quick response and high precision. - This device can review the readings of the current, max, min, up limit and low limit data 2. In memory - Automatically record and store the data of temperature and humidity. 3. Data transfer - Directly connect the device with PC USB interface to transfer data with PC. 4. In programming - To set up sampling period, storage interval and alarming. 5. In analyzing - With specialized software to analyze the data of temperature and humidity with easy and reliable operation 6. In safety - The bracket allows screw fastening with transparent water dust proof cover to protect the device from moisture 7. In convenience - Both temperature and humidity can be displayed with battery volume alert, this device is compact and portable to be placed and worked like a flash disk

Read more less

About the product1. The carbon dioxide tester applies to the continuous online detection and site sound-light alarm of carbon dioxide concentration in various industrial environment and special environment, which functions as early warning for operation safety on the dangerous site. 2. Using the imported electrochemical sensor and microcontroller technologies, the instrument is featured by stable signal, high precision and good repeatability and other merits, and its explosion-proof connection mode applies to various dangerous sites. 3. It can provide 24 hours continuous real-time monitoring of indoor carbon dioxide concentration, display date, detection time, temperature and humidity data on the detection site automatically. 4. This instrument is compatible with various control alarms, PLC, DCS and other control systems, which can realize site alarm, remote monitoring and alarm function at the same time.Functions1. Sound-light alarm setting 2. Low battery indication 3. LCD backlight display 4. Temperature unit switch 5. Data and time setting 6. Support carbon dioxide gas detection 7. Maximum value, minimum value and data hold 8. Data display format: YMD or MDY switch

Read more less

About the product1. This is a professional network cable detection equipment, designed for wires tracking. 2. Can help you to find the cable from a plenty of wire cable quickly and efficiently. 3. It is a necessity instrument in the routine maintenance of network cables, communication cables, metal line construction projects 4. The transmitter is powered by 1.5V 3 x AAA batteries (not included) 5. The receiver is powered by 6F22 9V battery (included)Functions1. Long distance wiring tracing 2. Internet cable order verifying 3. Wiring voltage existence inspection 4. Wiring voltage positive or negative characteristic measuring. 5. Wiring shorts inspection 6. Low battery indication 7. Tracing sensitiveness and volume adjusting 8. Headphone jack output 9. FlashlightPackage Contents- 1 x Transmitter - 1 x Receiver - 1 x RJ11 Crystal Head Wiring - 1 x RJ45 Crystal Head Wiring - 1 x Alligator Clip Wiring - 1 x English User Manual - 1 x 6F22 9V Battery

Read more less

About the product1. This product adopts piezoelectric effect of artificial polarized ceramic for design. 2. It is suitable for monitoring of all kinds of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. 3. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation etc. field.Features1. LCD displays measurement result and conditions directly 2. Measure acceleration, velocity and displacement 3. Selective vibration characteristic 4. Use hi-sense of vibration sensor, measuring accurately 5. Equipped two probes (S and L) to adapt the different measurement requirement 6. Provide a magnetic probe to fit the condition uneasy hold on by hand 7. Low battery indication 8. Auto turn off function 9. LCD back light function 10. Maximum value hold function 11. Temperature unit Celsius Degree / Fahrenheit Degree selection

Read more less

Features1. Auto discharge function to make the operation safe 2. LCD backlight 3. Digital readout display 4. Live circuit warning symbols with audio sounds 5. Anto power off function (in 10 minutes without operation) 6. Timer measurement function 7. Low battery indication 8. Suitable for 12V DC adapter (12V / 1A)Specifications1. Display: Max. 999 counts LCD display (1000 counts only at 1T is displayed) Bar graph / max. 36 points. 2. Over range indication: OL mark appears on insulation resistance range. LO mark appears on voltage range 3. Auto-ranging: Range shifts to upper range: 1000 counts. Range shifts to lower range: 95 counts (merely on the insulation resistance range) 4. Sample rate: 0.5-10 times / sec 5. Operable altitude: Less than 2000m (Indoor use) 6. Operation circumstance: Temperature 0-40 Celsius Degree, humidity: <=85% 7. Storage circumstance: Temperature -20-60 Celsius Degree, humidity: <=90% 8. Overload protection: Insulation resistance: AC 1200V / 10s, Voltage: AC 720V / 10s 9. Voltage resistance: AC8320 (50/60Hz)/5 seconds (between electrical circuit and enclosure) 10. Insulation resistance: 1000M of more / DC 1000V (between electrical circuit and enclosure) 11. Power Supply: DC 12V (8 x 1.5V LR14 batteries) (included) 12. Size: 153mm x 96mm x 220mm 13. Weight: 1032g (without batteries and test wires)

Read more less

About the product1. Built-in microcomputer chip for energy metering, along with current sensor and LCD display 2. Can be used to measure air conditioners, refrigerators, microwave and other household appliances 3. Suitable for families, rental housing, office, laboratory and etcFeatures1. Standard: BC17215-2003 2. Power applied: 220V 50Hz Max 16A (Less than 3520W) 3. Precision: 1.0 4. Constant: 6400imp/kWh 5. Power consumed: less than 1W 6. Operating temperature: 0 - 45 celsius degree 7. Storage temperature: -20 - 60 celsius degree 8. Monitor present active power/voltage/current/frequency 9. Record powering time and power consumed 10. Calculate CO2 emission 11. Backlight and Large LCD display

Read more less

1. Name: Dial indicator 2. Precise and professional made, stable performance 3. Range: 0-10mm 4. Resolution: 0.01mm 5. Display: Pointer 6. Color: Silver 7. Dimension: 5.5*2.2*4cm (Diameter*thickness*bottom length) 8. Function: Metering the concentricity of principal axis

Read more less

Display Type:Digital With Backlight Or Not:No DIY Supplies:Electrical Product Description A TDS meter (aka ppm pen, nutrient tester, tds stick) is an inexpensive and convenient digital tool to instantly check your overall water quality. TDS = Total Dissolved Solids, which is any salt, metal or mineral in the water. With the push of a button, the TDS can tell you your overall water purity level,which will be displayed on the screen in ppm (parts per million). The lower the TDS level, the purer the water, with 0 ppm being pure H2O. The TDS is great for checking your tap water quality, or knowing when to change a filter. (The meter does not test for biological contaminants.) The TDS is a great tool for drinking water,water filtration and purification, colloidal silver, hydroponics (test your nutrients), aquariums, RO/DI systems, pools and spas, commercial and industrial applications and more. The TDS is a rugged model that includes a protective carrying case. This is the worlds most popular handheld TDS meter for industry professionals. ts Ideal for Commercial Use Its Includes a Carrying Case with Belt Clip Hold Function: Saves Measurements for Convenient Reading and Recording Highly Efficient and Accurate Due to Its Advanced Microprocessor Technology Built-in Digital Thermometer, Display: Large and Easy-to-read LCD Screen. The AquaLutio Digital TDS Water Meter is ideal for testing applications such as hydroponics and gardening, pools and spas, aquariums and reef tanks, water ionizers, Water Filter. drinking water and more. TDS Water Meter is ideal for testing applications ideal drinking water, Water Filter, carbon filters, spring water, hard water, average tap water, Refrigerator Water Filter, Water Filter, brita filter, Reverse osmosis, reverse osmosis filter.Features 1. The AquaLutio digital TDS water meter is ideal for testing applications such as hydroponics and gardening, pools and spas, aquariums and reef tanks, water ionizers, water filter. drinking water and more.2. Measurement Range: 0-9990 ppm , 1 ppm Resolution, +/- 2% readout accuracy.3. Temperature Button: Test water temperature, 31 - 200 F degrees, 1 F degree resolution.+/- 2% Readout Accuracy.4. Function: Saves measurements for convenient reading and recording.5. Auto-off function: Turns off meter after 10 minutes of non-use to conserve batteries.6. The smallest and lightest TDS meter available on the market. Highly efficient and accurate due to Its advanced microprocessor technology. 7. Power source: 2 x 1.5 V(LR44 Button Cell)

Read more less

DIY Supplies:Electrical Model Number:CO Gas Analyzer The Carbon monoxide gas detector is a portable detector for detecting carbon monoxide (CO) gas. It can continuously monitor the CO gas concentration in the surrounding environment, once the gas concentration reaches the level of the alarm, the alarm will sound, light and vibration.High precision portable CO gas tester with compact size and light weight is easy to carry and operate. It is widely used in petroleum, chemical, coal, metallurgy, paper, fire, municipal, telecommunications, food, textile and other industries.Features:1. Portable detector for detecting carbon monoxide(CO) gas.2. Can continuously monitor the CO gas concentration in the surrounding environment.3. Sound alarm works when CO gas concentration reaches the level of the alarm.4. Compact size, light weight, easy to carry and operate.5. Professional and accurate measurement.6. Large LCD display and degree C / degree F switch.7. Can set concentration of alarm value.9. Auto power off in 10 minutes without any operation.Specifications:1. Brand Name: SMART SENSOR 2. Color: Orange + Black3. Material: ABS Plastic4. Sensor Type: Stablized Electrochemical Gas Specific (CO)5. Detection Gas: Carbon Monoxide (CO)6. Temperature Measurement: Ambient Temperature 7. Display Unit: CO: ppm, Temperature: Degree C / degree F 8. Measurement Range: CO: 0~1000PPM, Temperature: 0~50 degree C / 32~122 degree F 9. Resolution: CO: 1PPM, Temperature: 0.1 degree C / 0.1 degree F 10. Accuracy: CO: +/-5% or +/-10PPM, Temperature: +/-1.5 degree C11. Response Time: <60s 12. Alarm: Sound Alarm 13. Alarm Point: 24PPM Preset (Adjustable) 14. Battery Type: 3 * AAA 1.5V Alkaline Batteries (NOT Included)15. Operating Temperature: 0~50 degree C, Relative Humidity 1%~99%16. Storage Temperature: -30~60 degree C, Relative Humidity: 1%~99%

Read more less

DIY Supplies:Plumbing Model Number:Gas Analyzers Install, and it could detect gas, liquefied petroleum gas, coal gas, methane, other combustible gases etc. It also has a clear LCD display for showing the numerical number of gas concentration, and it will give a loud sound when it detects a gas leakage, practical to use.Features:1. The shell of our gas detector is made of high-quality plastic material, which makes it eco-friendly, sturdy and durable to use.2. When the gas leakage occurs, the gas concentration reaches the alarm concentration will sound and light alarm, play a timely reminder, to ensure personal safety.3. With a clear LCD display, the numerical number of gas concentration will show on it clearly. When the detector detects a gas leakage, it will give an alarm in a loud sound.4. Our gas detector is highly sensitive, it could detect many kinds of gas, such as liquefied petroleum gas, coal gas, methane, other combustible gases etc.5. Easy to install with included screws and installed panel, it is also very easy to use with the power button, plug and play.6. A great household necessity to protect your families safety. Perfect for using in home kitchen, bathroom, bus carriage, grill house and so on.Specifications:1. Plug Standard: EU Plug2. Shell Material: Plastic3. Color: White4. Operating Voltage: AC 90V-240V 50/60Hz5. Working Current: 200mA6. Battery: 9V Ni-Mh Battery (Not included)7. Alarm Concentration: 2500PPM (+/-1500PPPM)8. Alarm Output: Sound & Flash alarm9. Alarm Language: English10. Operating Temperature: -10 degree C ~ +50 degree C11. Relative Humidity: 10%-95%12. Installation Mode: Wall mounted13. Alarm Sound: >=85db14. Size: Approx. 112*73*43mm

Read more less

DIY Supplies:Paint & Decorating Model Number:SMART SENSOR 4 in 1 Gas Detector This professional 4 in 1 gas detector is designed for detecting CO, H2S, O2 and LEL gas. It can continuously monitor the CO, H2S, O2 and LEL gas concentration in the surrounding environment, once the gas concentration reaches the level of the alarm, the alarm will sound, light and vibrate. High precision portable CO, H2S, O2 and LEL gas tester with compact size and light weight, very easy to carry and operate. Features:1. Detect 4 kinds of gas: carbon monoxide(CO), hydrogen sulfide(H2S), oxygen(O2) and combustible gas(LEL).2. Continuously monitor the CO, H2S, O2 and LEL gas concentration in the surrounding environment with professional and accurate measurement.3. Sound & light vibration alarm works when one of the CO, H2S, O2 & LEL gas concentration reaches the level of the alarm.4. Can set automatic shutdown time and concentration of alarm value.5. Large color LCD display with back-light for easy reading.6. Can connect to a sampling pump to operate in closed place.7. Can be widely used in shipping, mining, oil exploitation, chemical, gas pipeline, tunnel construction, coal, metallurgy, paper, fire, municipal, textile and other industries.8. Size: 138*70*43mm, weight: 360g

Read more less

1. Measurement mode (automatic selection): iron-based mode (electromagnetic induction), aluminum-based mode (eddy current effect measurement)2. Measuring range: 0-1300μm3. Measurement accuracy: +/-(3%+2μm)4. Resolution: 1pm5. Optional unit: pm / mm / mils6. Operation interface: graphic dot matrix/menu mode7. Data storage: 4 groups of data can be saved, each with a maximum of 80 data points8. Data analysis: point statistics/average value/maximum value/minimum value/standard deviation9. Alarm threshold: high and low thresholds can be set, the screen icon will automatically flash the alarm prompt10. The smallest measurable convex curvature radius: 1.5mm11. The smallest measurable radius of curvature of the concave surface: 2.5mm12. The minimum area to be measured radius: 3mm13. The minimum thickness of the substrate to be tested: 0.5mm14. Computer interface: the measured data can be downloaded and saved through the USB data cable15. Battery: Two 1.5 A A A batteries (not included)16. Working environment: temperature 0~40 degrees Celsius (32 ~ 104 degrees Fahrenheit), humidity 20% ~ 90%17. Storage environment: temperature -20 ~ 70 degrees Celsius (-4 ~ 158 degrees Fahrenheit), humidity 30% ~ 70%, no strong magnetic field interference18. Size: 11 x 5.5 x 2.5cm19. Weight: 0.18 kg

Read more less

1. Type: Rotary Adjustable Lever Arm with Roller 2. Voltage Rating: AC 250V 5A, DC 115V 0.4A 3. Roller Dimension: 1.8 x 0.7cm 4. Lever Arm Length: 10cm

Read more less

1. Model No: ME-8111 2. Type: Standard Pin Plunger, Automatic Reset 3. Pin Diameter(Approx.)??? 6.8mm / 0.27" 4. IP Rating: IP66 5. Power :AC 380V, 6(2)A /AC 250V, 10(4)A 6. Mounting Hole Diameter: 4.5mm / 0.18" 7. Hole Center Point Distance: 56mm x 21mm / 2.2" x 0.8" (L*W) 8. Overall Size: 99 x 28 x 25mm / 3.9" x 1.1" x 1" (L*W*T) 9. Main Color: Blue, Gray, Black 10. Material: Plastic, Metal, Rubber 11. Weight: 57g

Read more less

1. Model: ME-8107 2. Type: Rotatable, Adjustable Lever 3. IP Rating: IP66 4. Power :AC380V, 6(2)A / AC250V, 10(4)A 5. Mounting Hole Diameter: 4.5mm / 3/16" 6. Lever Length: 123mm / 4.8" 7. Body Dimension :97 x 28 x 25mm / 3.8" x 1.1" x 1" (L*W*T) 8. Color: Black & Blue 9. Material: Plastic, Metal & Rubber 10. Weight : 83g

Read more less

1. Model No: ME-8112 2. Type: Parallel Roller Plunger, Automatic Reset 3. IP Rating: IP66 4. Power: AC 380V, 6(2)A /AC 250V, 10(4)A 5. Mounting Hole Diameter: 4.5mm / 0.18" 6. Hole Center Point Distanc: 56mm x 21mm / 2.2" x 0.8" (L*W) 7. Roller Diameter:12.8mm / 0.5" 8. Overall Size: 110 x 28 x 25mm / 4.3" x 1.1" x 1" (L*W*T) 9. Main Color: Blue, Gray, Black 10. Material: Plastic & Rubber 11. Weight: 61g

Read more less

1. Model No: ME-8169 2. Type: Wobble Stick Lever 3. IP: Rating IP66 4. Power: AC 380V, 6(2)A /AC 250V, 10(4)A 5. Mounting Hole Diameter: 4.5mm / 0.18" 6. Body Dimension: 88 x 28 x 25mm / 3.5" x 1.1" x 1" (L*W*T) 7. Lever Length: 85mm/3.3" 8. Main Color: Blue, Gray, Black 9. Material: Plastic, Metal, Rubber 10. Weight: 60g

Read more less

1. Type: Roller Arm Type 2. Roller Dimension: 1.8 x 0.7cm / 0.7 x 0.3"(D*H) 3. Lever Arm Length: 5cm 4. Total Size: 12.5x2.8x2.5cm 5. Material: Resin, Plastic & Metal 6. Color: Blue, Gray & Black 7. Weight: 81g

Read more less

1. Model No: ME-8122 2. Type: Rotary Roller Plunger 3. Voltage Rating: AC380V, 6(2)A /AC250V, 10(4)A 4. Roller Diameter: 1.2cm/0.47" 5. Fixing Thread Diameter: 0.4cm / 0.2" 6. Dimension: 11 x 2.8 x 2.6cm/4.3" x 1.1" x 1"(L*W*H) 7. Material: Resin, Plastic & Metal 8. Color: Black & Blue 9. Weight: 60g

Read more less

Features1. Measure thickness of surface coatings on metal substrates 2. Single/continuous/differential measurement available 3. Zero-point/2-point/basic calibration available 4. Metric and imperial units of measurement optional 5. Powered by 2 x 1.5V AAA batteries 6. LCD backlight 7. Auto power offSpecifications1. Measuring range:0 - 1800 micron / 0 - 70.9 mil 2. Resolution: 0.1 micron/1 micron/0.1 mil 3. Measurement error: +-(3%H + 1 micron) 4. Min diameter of substrate: 12mm 5. Min thickness of substrate: 0.5mm 6. Min curvature radius of convex substrate: 2mm 7. Min curvature radius of concave substrate: 11mm 8. Operating temperature: 0 - 40 celsius degree 9. Operating humidity: 10% - 95% relative humidity

Read more less

Features1. Measure thickness of surface coatings on metal substrates 2. Single/continuous/differential measurement available 3. Zero-point/2-point/basic calibration available 4. Metric and imperial units of measurement optional 5. Powered by 2 x 1.5V AAA batteries 6. LCD backlight 7. Auto power offSpecifications1. Measuring range: 0 - 1.80mm (0 - 71.0 mil) 2. Resolution: 0.01mm/1mm 3. Measurement error: +-0.03mm 4. Min diameter of substrate: 50mm 5. Min thickness of substrate: 0.5mm 6. Operating temperature: 0 - 40 celsius degree 7. Operating humidity: 10% - 95% relative humidity

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

Read more less

1. Material: Aluminum Shell, ABS Shell 2. Spring force is uniform and stable, fine grinding closure is good. 3. Pressure handle, circular measurement, with metric-British conversion function 4. LCD screen display, easy to use 5. Suitable for measuring all kinds of planar soft materials, such as leather, paper, film, sponge, wire, etc. 6. Size: 120*100mm

Read more less

Features1. Full view large screen digital display, with back-lighting function. 2. Ferrous & Non-Ferrous 2 in 1 integrated probe can automatically measure the coating of iron base surface and non magnetic surface coating of aluminum. 3. The design of the waist of the gauge is more convenient to measure reading, and the antiskid silicone is wrapped on both sides of the gauge. 4. There are 6pcs accurate points, 0/50/100/250/500/1000um, it is very convenient to adjust. 5. 5 minutes without operation automatic shutdown power saving.Parameters1. Model: RZ240 2. Measurement range: 0~1300um 3. Measurement accuracy: +/-(3%+2um) 4. Minimum eesolution: 0.1um 5. Working environment temperature: 0-40 degree C (32-104 degree F) 6. Humidity: 20%~90%RH 7. Battery: 4 x AAA Battery (Not included) 8. Probe F: Magnetic induction 9. Probe N: Eddy current 10. Range: 0~1300um / 0~51.2mil 11. Accuracy: +/-(3%+2um) / +/-(3%+0.08mil) 12. Resolution: 0.1um/0.01mil 13. Calibration Points: ZERO/50/100/250/500/1000um 14. Units: Um, mil

Read more less

1. Brand Name: RZ 2. Range: 0~1300um, 0~51.2mil 3. Resolution: 0um~999um (1um) 4. Units:Um, mil; Accuracy: +/- (3% of readings+2um) 5. Minimum measuring size: Diameter 6mm (236mils) 6. Calibration: One to four point calibration, zero calibration 7. Alarm: User can set the high/low alarm, and alarm icon displayed on LCD when over the limit 8. Power supply: 1.5V AAA batteries * 2 (not included) 9. Measuring mode: Single / continuous 10. LCD back light: Yes 11. OperationEnvironment: Temperature:0~40 degree C (32~104egree F) 12. Resolution: 0um~999um (1um), 1000um~1300um (0.01mm); 0mils~39.39mils (0.01mils), 39.4mils~51.2mils (0.1mils) 13. Computerinterface: Download data via USB interface 14. Application: Non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals

Read more less

1. Model number: RZ260FN 2. Brand Name: RZ 3. Thickness Range:0-1250um/ 0-50mil 4. Accuracy: (1%+0.1)mm 5. Resolution: 0.1um, 0.1mil 6. Feature 1: Ferrous, non-ferrous 2 in 1 7. Feature 2: Flip display, Easy Reading at any condition and angle 8. Feature 3: Simultaneously displays 4 readings 9. Memory: 50 data store 10. Power Supply:1 x 1.5V AAA alkaline (not include) 11. Operation Temperature: 0~50C (+32~120F) 12. Warranty:1 Year 13. Calibration: Zero-in, 2 points calibration and multi-point calibration selectable

Read more less

With Backlight Or Not:NoType:Coating Thickness GaugeWeight:About 26 gColor :Blue1. Measurement range: 0.0-2.0mm, 0.0-80mil2. Accuracy: 2% rdg + -0.1 mm, or 2% rdg + -4 mil3. Resolution: 0.1 mm / 1 mil4. Power: 3V button battery (not included)5. Measurement Technology: Magnetic6. Size: 6.9x3.8x2 cm7. Automatically identify the substrate material, and quickly and accurately detect the thickness of the coating.8. Integrated probe to make the measurement more accurate.9. 30 seconds without operation, automatic shutdown, extending the service life.

Read more less

feature1.2.0 inch large screen2. Rotatable display for different user views3. Measurement process.Easy to operate, directly attached to the coatingDisplay properties and thickness on the screen.4. Provide zero and multi-point calibration, calibrationReliable and fast.5. Save up to 30 sets of measurement data, power offThe datum will not be erased.6. Upper limit / lower limit warning function7. Press the power supply to automatically power offNothing happens.8. Low power indicationPackage Included1 coating thickness gauge1 plastic box1xusb cable2x calibration sheet5x standard foil1 English manual

Read more less

Specification:1. Measuring range: 0-1700um2. Display mode: Digital display3. Weight: 0.25 (kg)Features:1. 2.0 inches large screen segment2. Swivel display screen for different views of user during process measurement.3. Simple operation, connect directly to the coating and on the screen shows the property and thickness.4. Provide Zero and Multi-point calibration, calibration Reliably and quickly.5. Measured energy saving given up to 30 sets, power-off will not be obliterated given.6. The upper / lower limits alarm function7. Pressing for power-on, power-off automatically without any operation.8. Low power indication

Read more less

Specification:1. Measuring range: 0-1700um2. Display mode: Digital display3. Weight: 0.25 (kg)Features:1. 2.0 inches large screen segment2. Swivel display screen for different views of user during process measurement.3. Simple operation, connect directly to the coating and on the screen shows the property and thickness.4. Provide Zero and Multi-point calibration, calibration Reliably and quickly.5. Measured energy saving given up to 30 sets, power-off will not be obliterated given.6. The upper / lower limits alarm function7. Pressing for power-on, power-off automatically without any operation.8. Low power indication

Read more less

Feature 1.C/f setting2.Built-in laser point increase the target increase3.Automatic data hold4.Auto power off5.White backlit LCD display6.Overrange indication7.High temperature8.MAX,MIN,DIF,AVG record9.High/low alarm,trigger lock10.Adjustable emissivity11.Data record Package included 1 x Non-Contact Infrared Thermometer (no including battery)1 x English Manual1 x tripod1 x Plastic box1xCD1xUSB

Read more less

1. Measuring range: 0-1300um2. Measurement object: Paint thickness on the surface of metal substrate. plating. Carburizing, etc.3. Measurement accuracy: 0-999um (0.01mm)4. Resolution: 1um9 (0.03mil)5. Power supply: 2 * 1.5V AAA battery (not included)6. Size: 117 * 30 * 22.5mm (mm)7. Weight: 60g (kg)

Read more less

1. Material: High-quality steel2. Process: ABS engineering plastics3. Calibration process: laser calibration4. Resolution: 0.001mm5. Packaging: New plastic packaging6. Size: 16x6cm7. High-definition LED screen, digital display is clearer8. Precise measurement, efficient and stable9. 3V large capacity battery, lasting power10. Mechanical laser scale, can be used without electricity

Read more less

1. Material: High-quality steel2. Process: ABS engineering plastics3. Calibration process: laser calibration4. Resolution: 0.001mm5. Packaging: New plastic packaging6. Size: 16x6cm7. High-definition LED screen, digital display is clearer8. Precise measurement, efficient and stable9. 3V large capacity battery, lasting power10. Mechanical laser scale, can be used without electricity

Read more less

1. Material: High-quality steel2. Process: ABS engineering plastics3. Calibration process: laser calibration4. Resolution: 0.001mm5. Packaging: New plastic packaging6. Size: 16x6cm7. High-definition LED screen, digital display is clearer8. Precise measurement, efficient and stable9. 3V large capacity battery, lasting power10. Mechanical laser scale, can be used without electricity

Read more less

1. Material: High-quality steel2. Process: ABS engineering plastics3. Calibration process: laser calibration4. Resolution: 0.001mm5. Packaging: New plastic packaging6. Size: 16x6cm7. High-definition LED screen, digital display is clearer8. Precise measurement, efficient and stable9. 3V large capacity battery, lasting power10. Mechanical laser scale, can be used without electricity

Read more less

1. Dimensions: 132×69×29 mm2. Weight: 200 grams3. Reading display: three and a half digits LCD display, the maximum reading is 19994. Gear position: low frequency-V/m, high frequency—μW/cm25. Test accuracy: low frequency 1V/m, high frequency 1μW/cm26. Test bandwidth: low frequency 5Hz-400KHz, high frequency 30MHz-2000MHz7. Battery model: 6F22 9V (not included)Features:1. Simple operation, can quickly measure the electromagnetic radiation intensity around home appliances, wires and industrial equipment2. Good value and easy to carry3. The test frequency band is wide, can be divided into two levels of high frequency and low frequency measurement4. The test is accurate, and the lowest frequency for measuring electromagnetic radiation can reach 5Hz5. Design conforms to CEApplication1. Used for environmental electromagnetic radiation testing: measurement of radiation sources such as rooms, offices, computer rooms, control rooms, cables, high-voltage lines, monitors, transmitters, etc.2. Used for electromagnetic radiation measurement of home appliances: test and analysis of radiation sources such as mobile phones, computers, televisions, copiers, fax machines, air conditioners, refrigerators, etc.

Read more less

Feature: 1. The color screen display and a variety of backlight colors, can be clearly read. 2. 2 measuring methods: single measurement & continuous measurement, 3 calibration modes: basic setting, offset, zero calibration. 3. 1500 data storage, 100 independent arrays, each group can store 15 data for easy reviewing and data analysis at any time. 4. Fully automatic foura??way rotating screen can be easily read in any position, convenient and practical. 5. It is a portable thickness tester with high resolution display. It is a good helper for detecting seconda??hand cars to identify accidental car. Specification: 1. Material: ABS 2. Measuring range: 0-1800um/0-70.9mil 3. Resolution: (0.1um( Less than 100um), 1um(Greater than or equal 100um) 0.1mil/0.001mm 4. Measurement error: Less than or equal 150um, +/-5um, Greater than 150um, +/-(3%+1um) 5. Diameter of Magnetic Metal Substrate: Greater than or equal 12mm/0.47in 6. Thickness of Magnetic Metal Substrate: Greater than or equal 0.5mm/0.02in 7. Curvature Radius of Magnetic Convex Substrate: Greater than or equal 2mm/0.08in 8. Curvature Radius of Magnetic Concave Substrate: Greater than or equal 11mm/0.43in 9. Power Supply: 2400mAh NiMH battery (not included) or USB charging Package List: 1. Coating Thickness Gauge(Battery Not Included) x 1 2. USB Cable x 1 3. Power Adapter x 1 4. Iron Base x 1 5. Storage Plastic Bag x 1 6. Cotton Pad x 2 7. Calibration Sheet x 6

Read more less

This unit is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by microprocessor, provides quick and precise measurement of thickness for most of industrial material. This unit is widely used in various precise measurement for different hardware / parts in industrial realm; one of its important application is to monitor the level of thickness-decreasing during operation of various and pressure container. Diffusely applied in manufacture fields, metal processing, and commercial inspection. Scope of application: This unit is suitable for measuring materials that are good ultrasonic conductor such as metal, plastic, acrylic, glass etc., as long as the measured part in two parallel surfaces for measurement of thickness. This unit is not suitable for cast iron due to its big crystalloid composition. Features and functions: 1. Auto calibration to assure the accuracy 2. Sound velocity measurement: with a given thickness to measure the sound velocity to improve accuracy 3. 12 sound velocities for different material 4. Coupling status indication 5. Preset 12 thickness measurement data store and recall 6. Thickness alarm setup 7. Backlight display 8. Low battery indication 9. Auto power off 10. Metric / Imperial selection 11. Measuring mode selection Specification: 1. Measuring range: 1.0~300mm 2. Accuracy: +/-(1%H+0.1)mm 3. Resolution: 0.01mm(1.00 to 99.99mm), 0.1mm(100 to 300mm) 4. Sound Velocity Range: 1000~9999m/s 5. Working Frequency: 5MHZ 6. For Tube Measuring: Diameter 15 x 2.0mm( 6mm transducer), Diameter 20 x3.0mm (10mm transducer) 7. Power Supply: 3 x 1.5V AAA Batteries (Not Included)

Read more less

Features1. Measuring the thickness of non-magnetic coating on the magnetic metal substrate. 2. Measuring the thickness of the non-metallic coating on the non-magnetic metal substrate. 3. Automatically identifying the non-magnetic metal substrate and magnetic metal substrate. 4. Single measurement, continuous measurement and differential measurement available. 5. Zero-point calibration, Offset Calibration and basic calibration available. 6. Metric and imperial units of measurement optional. 7. LCD backlight. 8. Automatic shutdown.Specification1. The measurement range: 0 ~ 1800pm / 70.8mi/18mm 2. Resolution: (0.1 um(less than 100um), pm( greater than or equal 100pm)0.1mil 0.001mm less thano r equal 150um, +/-5um 3. Measurement error: Greater than 150 um,+/-(3%H+1pm) 4. The lower limit diameter of magnetic matrix: 12mm 5. The lower limit thickness of magnetic matrix: 0.5mm 6. The lower limit curvature radius of magnetic convex matrix: 2mm 7. The lower limit curvature radius of magnetic concave substrate: 11mm 8. The lower limit diameter of nonmagnetic matrix:50mn 9. The lower limit thickness of non-magnetic substrate: 0.5mm 10. Operating temperature: 20 ~ + 40 degree C (it is recommended to use the working temperature range in different environments, especially when the temperature difference is large, it needs to be recalibrated before use) 11. Working humidity range: 10 ~ 95% RH 12. Battery 1.5V AAA alkaline battery x 2 (not included) 13. Dimension: 62 x 27 x 121.5mm 14. Weight: 105.03g

Read more less

1. This anemometer is very small and light. It is very convenient to carry cbout. 2. It is an ideal tool for windsurfing, sailing, kite flying and mountain-climbing. You can also use it for agriculture, industrial or home purposes such as measuring speed and temperature of CPU computer fans, air-conditioners, airflow over the roof or walls, and so on. 3. Support Auto and Manual power off. 4. Has Max/Min/Average/Current wind speed measuring, current temperature measuring, low battery indication, backlight display function.

Read more less

1)Measure wind speed & temperature 2)Wind speed range: 0~30m/s 3)Wind temperature rang:-10~45℃(14~113℉) 4)Current/MAX/Average wind speed reading 5)Wind speed unit: m/s,km/h,ft/min,knots,mph 6)Temperature display in ℃/℉ 7)LCD backlight display 8)Auto/manual power off 9)Power supply: 3V CR2032(included) 10)This unit is an ideal tool for windsurfing,sailing,fishing,kite flying and mountaineering. 11)You can also use it for industrial and home purposes such as measuring wind speed and temperature of CPU computer fans,air-conditioners,air blower etc.

Read more less