Bestselling Products

1. AlphaAmbient temperature: -25 - +40 Degrees Celsius 2. Relative Humidity: Less than or equal to 85% (+30 Degrees Celsius) 3. Atmospheric pressure: 70kPa - 106kPa 4. Insulation resistance: cable terminal and metal components and fiber optic cable metal to strengthen the core, the fiber optic cable between the metal components, fiber metal structures and between the insulation resistance should be greater than 2 x 104Milliohm 5. Dielectric strength: between cable terminals and metal components and fiber metal reinforced core fiber optic cable between the metal components, fiber optic cable between the metal components and ground 15kV DC voltage, 1min without breakdown, arcing phenomena Product Features: 1. can be used for the two-cable with fiber optic cable to strengthen the core holder, and fixed fiber optic cable jacket, Block has a protective earthing. 2. the set of fiber optic cable, connecting pigtail, pigtails, jumpers, asylum and other functions as one. 3. line redundancy long with a capacity plate asylum protection. 4. disk fiber plate for layering, you can easily increase or decrease in construction, operation convenience. 5. disk fiber plate were given to mark, easy to identify. 6. fiber pigtail, patch cord, import and export rubber protective sleeve to control the radius of curvature in the 3.75CM above. 7. the terminal box by screws, can be easily fixed on the wall or the user that the right place 8. Widely used in city, agricultural, then the network system, data, image transmission systems, CATV cable television series, for indoor fiber optic cable through access and branch continuation, played the role of the the pigtail disk storage and protection of joints, the use of cold-rolled steelelectrostatic spray made a??a??reasonable structure, beautiful big before the fiber optic cable to strengthen the core in the terminal

Read more less

Introduction: This SPDIF/TOSLINK Digital Optical Audio splitter allows you to distribute input digital optical audio to three amplifiers or receivers, seamlessly and flawlessly without degradation. It supports LPCM2.0, DTS and Dolby-AC3 audio formats. Features: 1. One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal receiving device 2. Maintain digital sonic integrity and provides crystal clear digital sound quality over the long range 3. Support signal retiming 4. One way optical fiber signal splits into three identical outputs at the same time 5. Support Dolby Digital & DTS 5.1 6. Support LPCM Stereo 32 kHz 44.1 kHz 48 kHz and 96 kHz 7. Integrated circuit implementation delivers unsurpassed reliability and fidelity. Virtually no loss of quality 8. Use optical fiber cable loss less the 0.2Db/m, Output distance can be up to 40m. 9. Over-voltage protection 10. Plug and play, Installs in minutes 11. DC 5V/500mA power supply Specification: 1. Audio format support: LPCM2.0/DTS/Dolby-AC3 2. Peak wave length: 650nm 3. Max baud rate: 16Mbps 4. Output cable distance: >= 40m (Use the optical fiber cable loss less the 0.2Db/m) 5. Max working current: 100mA 6. Input: AC (50HZ, 60HZ) 100V-240V 7. Output: DC5V/500mA 8. Operating Temperature range :( 0 to +40 Celsius) 9. Operating Humidity range: 5 to 90 percent RH (No Condensation) 10. Weight: 35g 11. Dimension: 54mm x 54mm x 23.5mm

Read more less

1. Product name: LC-LC Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: LC-LC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: ST-ST Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: ST-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Scope of application: optical fiber communication network , fiber-optic broadband access networks, optical fiber of CATV , fiber optic instrumentation, optical fiber LAN 2. Composition of raw materials: precision ceramic casing 3. Flame resistance, reaching a 94 - V0 high-temperature environmental protection, comply with ROHS environmental requirements 4. Impact strength , look beautiful 5. Rugged and easy to use

Read more less

1. Product name: SC-SC Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-SC Dual-Core Single Mode Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: FC-FC Dual-Core Multi Mode Fiber Optic Jumper 2. Connector type: FC-FC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-LC Fiber Optic Jumper 2. Connector type: SC-LC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-FC Fiber Optic Jumper 2. Connector type: SC-FC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-SC Single-Core Single Mode Fiber Optic Jumper 2. Connector type: LC-SC 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-ST Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Scope of application: optical fiber communication network , fiber-optic broadband access networks, optical fiber of CATV , fiber optic instrumentation, optical fiber LAN 2. Composition of raw materials: precision ceramic casing 3. Flame resistance, reaching a 94 - V0 high-temperature environmental protection, comply with ROHS environmental requirements 4. Impact strength , look beautiful 5. Rugged and easy to use

Read more less

1. Product name: FC-ST Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-ST Fiber Optic Jumper 2. Connector type: SC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-ST Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: FC-ST Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-FC Fiber Optic Jumper 2. Connector type: SC-FC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-ST Fiber Optic Jumper 2. Connector type: SC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-ST Single-Core Single Mode Fiber Optic Jumper 2. Connector type: LC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-LC Fiber Optic Jumper 2. Connector type: LC-LC 3. Core diameter: 9 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-FC Fiber Optic Jumper 2. Connector type: LC-FC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-LC single-core single-mode fiber jumper 2. Connector type: LC-LC 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 10m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-SC Fiber Optic Jumper 2. Connector type: LC-SC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: FC-ST Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: FC-ST Single-Core Single Mode Fiber Optic Jumper 2. Connector type: FC-ST 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: LC-LC Fiber Optic Jumper 2. Connector type: LC-LC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-SC Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: SC-DC Single-Core Single Mode Fiber Optic Jumper 2. Connector type: SC-SC 3. Core diameter: 9 / 125um 4. Sheath diameter: 2.0mm 5. Length: 3m 6. Material: PVC 7. Color: Yellow feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Product name: ST-ST Fiber Optic Jumper 2. Connector type: ST-ST 3. Core diameter: 62.5 / 125um 4. Sheath diameter: 3.0mm 5. Length: 3m 6. Material: PVC 7. Color: Orange feature 1. Low insertion loss 2. Good repeatability 3. Not easy to damage 4. Mutual insertion performance 5. Good temperature stability 6. Application of optical fiber jumper: communication system, data transmission, cable TV, local area network (LAN), optical fiber sensor, test equipment, etc.

Read more less

1. Optical to coaxial Bi-directional audio converter: switch to select either OPTICAL TOSLINK or COAX input and convert the signal (as is) to both its COAXIAL and OPTICAL TOSLINK output ports 2. Audio format, audio input & output support audio format: LPCM2.0/ DTS/ DOLBY-AC3. And the highest support 192KHz sampling rate. Noise-free transmission, high definition audio output for your amplifier and speaker 3. Easy to setup, plug and play, no need any software and drive. It is able to power this optical to Coax converter from phone adapter and a USB jack on the TV or nearby USB port device 4. Long distance, use optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters(98 Feet), use the standard coaxial cable output can be up to 10 meters (32 Feet) 5. Wide applicability, compatible with Blu-ray player, satellite receiver, BR player, Xbox 360, HDTV, DVD, amplifier, sound bar, speaker and all device with digital audio out port

Read more less

1. The item is a toslink 3 to 1 optical audio switcher. 2. 3 input 1 output, allowing 3 devices to switch. It supports digital audio devices that have regular toslink connectors and provides bidirectional transmission between 1 signal and 1 audio player. 3. Rotatable switch allows user to switch transmission among 3 devices, easy operation. 4. Suitable for connecting MD DVD VCR CD Player, XBOX360, PS3 video game consoles, etc. 5. Simple installation, plug and play, easy to use.

Read more less

1. Three ways of optical fiber signals switch to one sets of SPDIF / Toslink signal receiving device. 2. Audio format support: LPCM2.0 / DTS / Dolby-AC3. 3. Support signal retiming. 4. Used optical fiber cable loss less the 0.2Db/m, output distance is up to 40m. 5. The input conrol can through R/M and also can directly press the button. 6. Support last time working state memory when power off. 7. Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine. 8. LED status indication. 9. No loss of quality. 10. Installs in minutes. 11. Need DC 5V / 500mA power supply. 12. The remote control is powered by CR2025 battery.

Read more less

1.Build-in high performance RTOS operating system and audio decoder chip, support DTS/AC-3 2.Super fast start time about 3 seconds 3.Input: SPDIF Optical, Coaxial 4.Output: L-OUT-R, 3.5mm headphone port 5.Auto switch between optical and coaxial channel input 6.Auto decode AC-3/DTS(LPCM/PCM/RAW) input signal without any action 7.High compatibility: support network player, HDTV, Blu-ray DVD, DVD, PS3, XBOX 360, DM500S, DM800HD, etc. 8.Small size and metal case, anti-interference 9.Adopt RCA/3.5mm headphone port output, convenient and efficient in use 10.Supports volume adjustment

Read more less

1. Supported audio format: LPCM2.0/DTS/DOLBY-AC3 2. Three SPDIF/TosLink input interfaces, one SPDIF/TosLink output interface 3. Manual remote control button 4. Infrared interface 5. Applicable equipment: TV, audio, power amplifier, PS3, PS4, etc. 6. Product size: 6.1x6.1x6.1cm

Read more less

1. This digital-to-analog audio converter can be used for home or professional audio switching. It can convert coaxial cable or Toslink digital audio signals into analog audio. At the same time, it can be connected to peripherals like amplifiers through standard RCA-style jacks2. Convert coaxial or optical digital audio signal to analog 3.5 or L/R audio3. Support sampling rate 44.1 32., 48-96KHz playback4. The input code stream is 24bit S/PDIF left and right channels, providing electronic noise reduction transmission5. Easy to install and simple to operate6. Input: coaxial or optical digital audio7. Output: R/L (audio output connector)8. Audio input connection: Toslink, 1xRCA (coaxial)9. Audio output connection: 2xRCA (right/left), 3.5 stereo10. Power input: AC 100-240V 50/60Hz

Read more less

1. Gold-plated tip, corrosion-resistant2. Connect the male head (rotate 360 degrees at a right angle) to the female head adapter3. Right-angle adapter helps connect cables in narrow and crowded spaces4. Convert toslink jack to female adapter5. Bend at a right angle (90 degrees)6. Rotate a full circle (360 degrees) around the toslink male axis7. Easy to use

Read more less

1. The product is toslink fiber optic male to female adapter2. Even at extremely high volume, Toslink digital audio cable can provide you with the cleanest signal.3. The optical cable transmits signals through light, thus completely eliminating any possibility of RFI, EMI or ground loop interference.4. The use of high-quality optical fiber core can ensure high speed, high efficiency, high fidelity and low broadband transmission loss.5. The metal head is strong and firm.6. The dust cap prevents the connector from being contaminated when not in use.7. The fiber optic cable can be connected to DVD, CD, MINI Disc Player, TV box, projector, etc., providing you with full and delicate sound quality.

Read more less

1. Reliable quality, can achieve electrical isolation, prevent digital noise from being transmitted through the ground wire, and help to improve the signal-to-noise ratio of the DAC 2. Effectively reduce the interference of audio signals around the equipment 3. PVC shell, flame retardant, high temperature resistance, strong pressure resistance 4. Easy to plug and unplug 5. If the fiber interface of your device is round, and there is a square fiber cable in your hand, use this adapter to easily connect 6. The adapter is compatible with mini Toslink fiber ports 7. Can be used for: DVD, power amplifier, TV, sound card, decoder, MD, CD player, notebook, speaker equipment, etc. (The premise of these devices must be a round mouth with optical fiber output function)

Read more less

1. One optical fiber signal input is distributed to three optical fiber signal outputs 2. Support audio format LPCM2.0/DTS/DOLBY-AC3 3. Support signal retiming 4. Use line loss less than 0.2DB/M. Output distance can reach 40M 5. Over-voltage protection function to prevent damage to the machine caused by the wrong power adapter. 6. No signal loss 7. Simple installation 8. External 5V/1A power adapter 9. Imported optical fiber core, mini convex lens, digital transmission bandwidth up to 250Mb/s 10. Used for connection between DM machines with optical fiber digital terminals, power amplifiers, DVD, VCR, CD players, MD and other audio equipment 11. Size: 6x6x2cm

Read more less

1. Reliable quality, can achieve electrical isolation, prevent digital noise from being transmitted through the ground wire, and help to improve the signal-to-noise ratio of the DAC 2. Effectively reduce the interference of audio signals around the equipment 3. PVC shell, flame retardant, high temperature resistance, strong pressure resistance 4. Elbow design, easy to pull out 5. When the optical fiber cable cannot be bent, the 360-degree rotating adapter can be effectively replaced to ensure the normal transmission of optical fiber cable and signal 6. If the fiber interface of your device is a square port, and you have a square port fiber cable in your hand, use this adapter to easily connect 7. Can be used for: DVD, power amplifier, TV, speaker equipment, etc.

Read more less

1. Reliable quality, can achieve electrical isolation, prevent digital noise from being transmitted through the ground wire, and help to improve the signal-to-noise ratio of the DAC 2. Effectively reduce the interference of audio signals around the equipment 3. PVC shell, flame retardant, high temperature resistance, strong pressure resistance 4. Elbow design, easy to pull out 5. If the fiber interface of your device is round, and there is a square fiber cable in your hand, use this adapter to easily connect 6. The adapter is compatible with mini Toslink fiber ports 7. Can be used for: DVD, power amplifier, TV, sound card, decoder, MD, CD player, notebook, speaker equipment, etc. (The premise of these devices must be a round mouth with optical fiber output function)

Read more less

1. Reliable quality, can achieve electrical isolation, prevent digital noise from being transmitted through the ground wire, and help to improve the signal-to-noise ratio of the DAC 2. Effectively reduce the interference of audio signals around the equipment 3. PVC shell, flame retardant, high temperature resistance, strong pressure resistance 4. Mini design, easy to plug and unplug 5. It can turn the optical fiber with square ports at both ends into square port and circle port, which is convenient for use 6. The square interface is commonly used in: DVD, power amplifier, TV, speaker equipment, etc.

Read more less

Feature:1. Receiving mode2. Transmitter mode3. DAC: Change digital audio to analog audio4. Hi-Fi Music5. Bluetooth/3.5mm audio cable/RCA cable/Spdif cable/coaxial connection6. Interface fiber,7. USB interface,8. Micro USB,9. Plug and play10. External power supply without external power transmission rate 5 (Mbps)11. Effective working radius 50 (m)12. Working frequency 2.4 (MHz)Product parameters:Bluetooth adapter Bluetooth: 5.0Scheme: A2DP, AVRCPInput: AVX fiber coaxialBluetooth output: RCA AVXBluetooth compatibility: Android, IOS phones, tablets, TVs, etc.audio port:1. 16-bit stereo DAC and 16-bit mono ADC audio codec;2. Support flexible audio equalizer adjustment;3. Support sampling rate 8,11.025,12,16,22.05,32,44.1,48KHz;4.2 analog stereo;5. One way microphone amplifier input;6. High-performance mono ADC with a signal-to-noise ratio of 90dBThe package includes:1 x Bluetooth adapter digital audio converter1 x Audio cable1 x Micro USB charging cable1 x Spdif cable1 x RCA cable1x User Manual

Read more less

1. Digital Optical Coaxial Audio Converter 2. Optical interface, 3.5DC interface, red and white audio output, 3.5 interface 3. Easy to carry around 4. Support 192K signal sampling 5. Plug and play

Read more less

1. Lossless transmission + high fidelity. 2. It can be used for DVD audio connection/PS4 game console connection/optical fiber modem connection. 3. Plug and play. 4. Size: 9cm x 17.5cm x 2.5cm 5. Weight: 95g

Read more less

Features1. Gold plated tip for corrosion resistance 2. Toslink Male (Right Angle Rotate 360 degrees) to Female Adapter 3. The right angle adapter aids in connecting cables in tight and congested spaces 4. Converts toslink jack to female adapter 5. Bent at a right angle (90 degrees) 6. Rotates in a full circle (360 degrees) about the toslink male axis 7. Easy to use

Read more less

Features1. Make a toslink cable into a 3.5mm cable 2. Make a 3.5mm hack into a toslink jack 3. The right angle adapter aids in connecting cables in tight and congested spaces 4. Easy to use 5. Gold plated tip for corrosion resistance

Read more less