Insta360 Accessories

1. Full screen and full lens integrated coverage, original molding, all-round protection without dead angle2. 9H+ high hardness, reinforced glass fiber material layer, 5 layers of pressure resistance, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and anti-fouling, anti-scratch and anti-abrasion4. High transmittance glass layer technology, reduce light reflection, the use of the perception of non-reflective, high-definition photo more focused5. Silky smooth hand feel, sensitive touch without obstruction6. Material: tempered glass7. Hardness: 9H8. Size:- Front screen tempered film: about 22.4 x 22.4mm - Rear screen tempered film: about 65.4 x 39.4mm- Lens tempered film: approx. 32.2 x 32.2mm9. Description: the camera in the picture is only for display purposes, shipment does not includePacking list:3 in 1:- Tempered film for front screen x 1- Tempered film for rear screen x 1- Lens tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 16 in 1:- Tempered film for front screen x 2- Tempered film for rear screen x 2- Lens tempered film x 2- Wet/dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. The lens is fully wrapped, more comprehensive protection2. With hanging hole design, can be hung on the lanyard to prevent loss3. The surface has been hand-feeling treatment, skin-friendly and delicate4. Precise molding, easy to disassemble and install5. Material: silicone6. Size: about 39 x 8.7mm7. Weight: about 6g8. Description: only the lens cap, does not include other items in the picture

Read more less

1. Input connector: Type-C2. Input: 12V 2A, 9V 2.22A, 5V 3A (use 12V 2A, or power adapter above 2A)3. Output: 4.35V 2.5A4. Charging time: about 35-75min5. Material: ABS6. Weight: about 58g7. Size: about 7.2 x 5.9 x 4cm8. Description: only the charging box, does not include other items in the pictureFeatures:1. Type-C charging port, support PD3.0/PD2.0 fast charging protocol, fast charging speed2. Embedded MCU intelligent charging management system, can identify high and low battery, prioritize to fill the high power battery3. According to the different battery power status, intelligent switching charging mode, low power fast charging, high power trickle, full power that stops4. Can be used as a battery organizer, can also store 2 micro SD cards5. Magnetic flip cover design, strong suction, the battery is not easy to fall out6. With charging indicator7. Lightweight and portable, can be easily put into the pocket8. Multi-protection, over-current/over-voltage/over-temperature/short-circuit/static protection

Read more less

1. Full screen and full lens integrated coverage, original molding, all-round protection without dead angle2. 9H+ high hardness, reinforced glass fiber material layer, 5 layers of pressure resistance, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and anti-fouling, anti-scratch and anti-abrasion4. High transmittance glass layer technology, reduce light reflection, the use of the perception of non-reflective, high-definition photo more focused5. Silky smooth hand feel, sensitive touch without obstruction6. Material: tempered glass7. Hardness: 9H8. Size:- Front screen tempered film: about 22.4 x 22.4mm - Rear screen tempered film: about 65.4 x 39.4mm- Lens tempered film: approx. 32.2 x 32.2mm9. Description: the camera in the picture is only for display purposes, shipment does not includePacking list:3 in 1:- Tempered film for front screen x 1- Tempered film for rear screen x 1- Lens tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 16 in 1:- Tempered film for front screen x 2- Tempered film for rear screen x 2- Lens tempered film x 2- Wet/dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. Real camera open mold, fully fit the body, easy to carry and storage2. Body bag in the camera USB cover to do the opening design, USB cover can be opened and closed at will, at any time to the camera charging3. Reserved space for the lens protector, fine velvet package, effectively prevent the lens from extrusion damage4. Velvet lining, soft touch, shock absorption and camera protection5. Surface shell using woven ants fabric, wear-resistant and not easy to scratch, effectively prevent the invasion of water and snow, durable use of the skin does not fall off6. Bottom opening, can be directly connected to the selfie stick and other camera brackets7. Material: EVA + ants cloth8. Weight: about 42g9. Size: about 12.7 x 6 x 5.5cm10. Description: only the organizer bag, does not include other items in the picture

Read more less

1. Sticker for the soft 3M material, with strong scalability, long-term adhesive stickers do not residual glue2. Comprehensive package, all-around protection3. Flat fit, no corners warping4. 1:1 molding of the real machine, fit the fuselage alignment, side seams precise articulation5. Lens, lights, microphone, speakers, buttons, quick release base and other interfaces, hole precision, not cover, do not affect the use of6. Description: only the sticker, does not include other items in the picture

Read more less

1. Curved edge design, fully wrapped, high fit2. 9H+ high hardness, reinforced glass fiber material layer, efficient explosion-proof3. Multi-layer high reinforcement, waterproof and dirt-proof, anti-scratch and anti-abrasion, anti-fingerprints4. High transmittance glass layer technology, reduce light reflection, restore the original color of the display5. Silky smooth hand feel, touch sensitive and non-obstructive6. Material: tempered glass7. Hardness: 9H8. Size: about 54.7 x 40mm, thickness: 0.25mm9. Note: the camera in the picture is only for display purposes, shipment does not containPacking list:1set:- Tempered film x 1- Wet and dry cleaning kit x 1- Dust remover x 1- Lens cleaning cloth x 1- Protective case x 12set:- Tempered film x 2- Wet and dry cleaning kit x 2- Dust remover x 2- Lens cleaning cloth x 2- Protective case x 1

Read more less

1. Sticker for the soft 3M material, with strong scalability, long-term adhesive stickers do not residual glue2. Comprehensive package, all-around protection3. Flat fit, no corners warping4. 1:1 molding of the real machine, fit the fuselage alignment, side seams precise articulation5. Lens, lights, microphone, speakers, buttons, quick release base and other interfaces, hole precision, not cover, do not affect the use of6. Description: only the sticker, does not include other items in the picture

Read more less

1. Sticker for the soft 3M material, with strong scalability, long-term adhesive stickers do not residual glue2. Comprehensive package, all-around protection3. Flat fit, no corners warping4. 1:1 molding of the real machine, fit the fuselage alignment, side seams precise articulation5. Lens, lights, microphone, speakers, buttons, quick release base and other interfaces, hole precision, not cover, do not affect the use of6. Description: only the sticker, does not include other items in the picture

Read more less

1. Sticker for the soft 3M material, with strong scalability, long-term adhesive stickers do not residual glue2. Comprehensive package, all-around protection3. Flat fit, no corners warping4. 1:1 molding of the real machine, fit the fuselage alignment, side seams precise articulation5. Lens, lights, microphone, speakers, buttons, quick release base and other interfaces, hole precision, not cover, do not affect the use of6. Description: only the sticker, does not include other items in the picture

Read more less

1. Sticker for the soft 3M material, with strong scalability, long-term adhesive stickers do not residual glue2. Comprehensive package, all-around protection3. Flat fit, no corners warping4. 1:1 molding of the real machine, fit the fuselage alignment, side seams precise articulation5. Lens, lights, microphone, speakers, buttons, quick release base and other interfaces, hole precision, not cover, do not affect the use of6. Description: only the sticker, does not include other items in the picture

Read more less

1. Built-in strong magnet, instant adsorption, easy separation2. Slim design, compact and portable3. Fixed by magnetic suction with claw buckle, stable and not easy to come off4. Magnetic two-claw interface + 1/4 threaded interface, suitable for a variety of accessories5. Anti-vibration silicone sheet with two raised reinforcement strips on both sides to further strengthen the firmness of the installation of quick-release accessories, and easily cope with high-intensity vibration scenarios6. Overall rounded, large finger position locking design7. Material: aluminum alloy8. Size: about 61.3 x 16 x 10.9mm9. Weight: about 25g10. Description: only quick release parts, does not include other items in the picture

Read more less

1. Lightweight and thin design, thickness of about 5.5cm, easy to put into the schoolbag, luggage2. Hot press molding inner support, precise molding, slot elasticity, height, fixed items not out of place3. Detachable inner tray, after taking out the inner tray, it is compatible with GoPro Hero, GoPro MAX, Insta360 X3 / ONE RS / GO2, DJI Action, etc.4. The inner bracket is about 3mm thick, comfortable and sturdy, and the surface is flexible fabric, shockproof and drop-resistant5. The watch case is made of woven ant fabric, which is wear-resistant and not easy to scratch, and effectively prevents the intrusion of water and snow6. Upper and lower mesh pockets are fully sealed, items are fixed and will not fall out7. Wrist strap design, ready to go8. Double zipper design, easy to use9. Material: EVA + ants cloth10. Weight: about 300g11. Size: about 29 x 16.5 x 5.5cm12. Description: only the storage bag, does not include other items in the picture

Read more less

1. Lightweight and thin design, thickness of about 5.5cm, easy to put into the schoolbag, luggage2. Hot press molding inner support, precise molding, slot elasticity, height, fixed items not out of place3. Removable inner tray, after taking out the inner tray, it can be compatible with GoPro Hero, GoPro MAX, Insta360 X3 / ONE RS / ONE X2 / GO2, DJI Action and so on4. The inner bracket is about 3mm thick, anti-shock and anti-drop, comfortable and sturdy, the surface is velvet, soft to the touch5. The watch case is made of woven ant fabric, which is wear-resistant and not easy to scratch, and effectively prevents the intrusion of water and snow6. Upper and lower mesh pockets are fully sealed, items are fixed and will not fall out7. Wrist strap design, ready to go8. Double zipper design, easy to use9. Material: EVA + ants cloth10. Weight: about 361g11. Size: about 29 x 16.5 x 5.5cm12. Description: only the storage bag, does not include other items in the picture

Read more less

1. Lightweight and thin design, thickness of about 5.5cm, easy to put into the schoolbag, luggage2. Hot press molding inner support, precise molding, slot elasticity, height, fixed items not out of place3. Removable inner tray, after taking out the inner tray, it can be compatible with GoPro Hero, GoPro MAX, Insta360 X3 / ONE RS / GO3, DJI Osmo Action and so on4. The inner bracket is about 3mm thick, shockproof and anti-drop, comfortable and sturdy, and the surface is made of flexible fabric5. The watch case is made of woven ant fabric, which is wear-resistant and not easy to scratch, and effectively prevents the intrusion of water and snow6. Upper and lower mesh pockets are fully sealed, items are fixed and will not fall out7. Wrist strap design, ready to go8. Double zipper design, easy to use9. Material: EVA + ants cloth10. Weight: about 361g11. Size: about 29 x 16.5 x 5.5cm12. Description: only the storage bag, does not include other items in the picture

Read more less

1. Lightweight and portable, with wrist strap and shoulder strap, can be handheld diagonally across2. Hard shell, durable and wear-resistant, effectively alleviate the external impact, PC material, waterproof and anti-dust and oil, a wipe clean3. Removable inner tray, after the inner tray is taken out, it can be compatible with GoPro Hero, GoPro MAX, Insta360 X3 / GO3 / GO2 / ONE RS, DJI Osmo Action and so on4. Ultra-thick plastic inner tray, about 3mm thick, precision molding, stable storage, sturdy and durable, inner tray surface velvet, comfortable care5. Double zipper design, easy to use6. Inside mesh pocket, can store charging cable and other small objects7. Material: PC+nylon8. Weight: about 174g9. Size: about 18.5 x 11.5 x 6cm10. Description: only the organizer bag, does not include other items in the picture

Read more less

1. Lightweight and portable, with wrist strap and shoulder strap, can be handheld diagonally across2. Hard shell, durable and wear-resistant, effectively alleviate the external impact, PC material, waterproof and anti-dust and oil, a wipe clean3. Removable inner tray, after the inner tray is taken out, it can be compatible with GoPro Hero, GoPro MAX, Insta360 X3 / GO3 / GO2 / ONE RS, DJI Osmo Action and so on4. Ultra-thick plastic inner tray, about 3mm thick, precision molding, stable storage, sturdy and durable, inner tray surface velvet, comfortable care5. Double zipper design, easy to use6. Inside mesh pocket, can store charging cable and other small objects7. Material: PC+nylon8. Weight: about 174g9. Size: about 18.5 x 11.5 x 6cm10. Description: only the organizer bag, does not include other items in the picture

Read more less

1. Lightweight and portable, with wrist strap and shoulder strap, can be handheld diagonally across2. Hard shell, durable and wear-resistant, effectively alleviate the external impact, PC material, waterproof and anti-dust and oil, a wipe clean3. Removable inner tray, after the inner tray is taken out, it can be compatible with GoPro Hero, GoPro MAX, Insta360 X3 / GO3 / GO2 / ONE RS, DJI Osmo Action and so on4. Ultra-thick plastic inner tray, about 3mm thick, precision molding, stable storage, sturdy and durable, inner tray surface velvet, comfortable care5. Double zipper design, easy to use6. Inside mesh pocket, can store charging cable and other small objects7. Material: PC+nylon8. Weight: about 174g9. Size: about 18.5 x 11.5 x 6cm10. Description: only the organizer bag, does not include other items in the picture

Read more less

Features1. Suitable for insta360 Ace Pro action camera 2. Made of aluminum alloy, durable; lightweight and portable 3. Can be installed directly on the camera lens, easy to install and remove 4. The internal thread diameter of the adapter ring is 52mm, which can provide protection for the camera lens after installing a UV mirror. 5. Can be connected to filters with an outer diameter of 52mm, such as CPL and ND filters, providing more possibilities for various photographic creations.Package List1. Adapter ring x 1 2. UV filter x 1 3. UV filter cap x 1 4. Allen key x 1

Read more less

1. Protective frame specially designed for Insta360 Ace / Ace Pro / Ace Pro 2 action camera. The material is high-quality PC plastic, which is strong and durable and can effectively protect the camera accessories from being bumped 2. Hollow design, the power button, unlock button, sound pickup port, and speaker are not blocked 3. Lightweight and portable, smooth frame design, easy to install and disassemble 4. The bottom has a movable base and a long screw, which can be connected to a sports camera movable base or a selfie stick. The camera can be used in various scenarios such as cycling, skiing, hiking, etc. 5. There is a cold shoe opening on the side and top of the frame to facilitate expansion and connection of fill lights, microphones, etc. 6. The frame does not block the screen, making it stress-free to take selfies when flipping the screen

Read more less

1. It is made of environmentally-friendly high-strength silicone material, which is sturdy and durable. 2. It helps to keep dust, smudges and scratches from your camera. 3. The hole position is accurate, ensure good appearance and protection function, and will not affect the use. 4. The surface is sprayed processing, beautiful elegant, comfortable to touch, and easy to clean 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. Suitable for Insta360 X4 desktop base, say goodbye to desktop scratch lens / body troubles 2. The surface of the silicone cover has been treated with a feel, which is skin-friendly and delicate, highlighting high-end quality 3. The bottom surface of the silicone base is large, and the camera can be placed on the base at will, which will not cause the camera to tip 4. Full silicone material, high-quality silicone material, no damage to the fuselage 5. Waterproof, dustproof and dust-free, stains can be removed with a light wipe

Read more less

1. Suitable for Insta360 X4 desktop base, say goodbye to desktop scratch lens / body troubles 2. The surface of the silicone cover has been treated with a feel, which is skin-friendly and delicate, highlighting high-end quality 3. The bottom surface of the silicone base is large, and the camera can be placed on the base at will, which will not cause the camera to tip 4. Full silicone material, high-quality silicone material, no damage to the fuselage 5. Waterproof, dustproof and dust-free, stains can be removed with a light wipe

Read more less

1. Silicone lens cover, special design for Insta360 X4. 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. It is made of environmentally-friendly high-strength silicone material, which is sturdy and durable. 2. It helps to keep dust, smudges and scratches from your camera. 3. The hole position is accurate, ensure good appearance and protection function, and will not affect the use. 4. The surface is sprayed processing, beautiful elegant, comfortable to touch, and easy to clean 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. It is made of environmentally-friendly high-strength silicone material, which is sturdy and durable. 2. It helps to keep dust, smudges and scratches from your camera. 3. The hole position is accurate, ensure good appearance and protection function, and will not affect the use. 4. The surface is sprayed processing, beautiful elegant, comfortable to touch, and easy to clean 5. Good choice for each photographer or outdoor activities enthusiast.

Read more less

1. The base has a built-in powerful magnet, which is very suitable for the host. 2. Aluminum alloy buckle + limit design, can not be easily shaken off 3. Silicone gasket, anti-slip and shock absorption 4. Foldable, suitable for GoPro interface + 1/4-inch interface 5. Main material: ABS

Read more less

1. Made of high-quality aluminum alloy material and CNC process, the product is durable and textured. 2. Built-in strong magnets, quick-release components instantly adhere to GO3. 3. With magnetic quick-release base, the base has 1/4-inch screws 4. Press the buttons on both sides to detach easily; Simply press gently when close for effortless attachment. 5. The base has a 1/4 screw hole and a universal adapter, which is widely compatible with selfie sticks, handles, tripods, etc.

Read more less

1.Protection bag specially designed for Insta360 X4. Fitted to the camera body, the hard shell is anti-collision and drop-proof, and the velvet lining is anti-scratch and shock-absorbing, providing all-round protection for your camera.2. The body bag has an opening design at the camera USB cover. The USB cover can be opened and closed at will to charge the camera at any time without taking out the camera.3. Compatible with lens protector: Reserve space for the lens protector and wrap it with fine velvet to effectively prevent the lens protector from being squeezed and damaged.4. The exterior is made of woven ant fabric, which is wear-resistant and not easy to scratch, effectively prevents water and snow from invading, and will not peel off after long-term use.5. Bottom opening allows direct connection of selfie sticks and other camera holders6. Material: EVA + ant cloth7. Dimensions: 136 × 59 × 62 (mm)8. Weight: 43g

Read more less

1. Mini carrying case specially designed for Insta360 X4, which fits the camera perfectly. PU shell and velvet lining provide all-round protection for your camera2. Compatible with lens protector: Reserve space for the lens protector and wrap it with fine velvet to effectively prevent the lens protector from being squeezed and damaged.3. PU shell, effectively prevents water and snow intrusion, and will not peel off after long-term use4. Bottom opening allows direct connection of selfie sticks and other camera holders5. Material: PU + velvet lining6. Dimensions: 14.3 x 7.2 x 5.6cm7. Weight: 60.4gPacking list:Storage bag x 1carabiner x 1

Read more less

1. Specially designed for Insta360 X5 / X4, it can store the body, battery, and the small mesh bag can store data cable, charger, etc. The inner bracket is removable and can be used to install GoPro, DJI Action, and other action cameras.2. Extra-thick plastic inner holder with flocked surface to prevent scratching your camera3. Hard PC shell, durable and wear-resistant, effectively alleviates external impact, waterproof and anti-fouling, and can be wiped clean4. Provides wrist ropes, side straps, and reserved buckles. In addition to being placed in a luggage bag and held in the hand, the storage bag can be hung on the wrist through the wrist rope and carried around the waist through the side straps.5. Double zipper design, easy to open and close6. Material: PC+nylon7. Dimensions: 185 × 115 × 60mm8. Weight: 174g

Read more less

Features1. Specifically designed for the Insta360 X4 camera; 2. 2.5D curved edge design tempered glass film, providing comprehensive protection for the camera, with anti-slip and wear-resistant properties, and sensitive touch control; 3. 9H hardness, resilient and effective in preventing screen cracking and shattering, adding an extra layer of protection to the screen; 4. Vacuum coating, easily removes oil and stains with a wipe, keeping the screen looking new for longer; 5. 0.15mm as thin as cicada wings, barely noticeable, providing screen protection without compromising viewing quality; 6. High-definition and high-transparency, restoring the true colors of the image with clear visual clarity.

Read more less

1. Suitable for Insta360 X5 / X4, can store a complete set of camera accessories, such as selfie stick, 3 batteries, charger, etc.2. The thickness of the storage bag is only 5.5 cm, and its thin and light design can be easily put into a school bag or suitcase, making it easy to carry when traveling.3. The thermoformed inner support has moderately tight slots to keep items in place. It is shockproof and anti-fall, and the flexible surface fabric protects your camera.4. The inner tray is detachable, and after removal, the space becomes larger and can accommodate more items.5. The shell is made of ant cloth, which is wear-resistant, not easy to scratch, and prevents rain intrusion.6. Material: EVA+ant cloth7. Dimensions: 290 x 165 x 55mm8. Weight: 300g

Read more less

1. Made of high quality ABS plastic material. 2. Anti-wear, durable and high quality. 3. Good heat dissipation performance to prevent the camera from crashing due to overheating. 4. An easy way to attach your camera to your handlebars, helmet, backpack mount or extension pole. 5. One screw is provided as standard, making installation and use simple and convenient. 6. The open side hole design is practical and convenient. You can directly install and remove the battery, charge it, and replace the memory card. It is easy to disassemble and install. 7. Cold shoe bases are installed on the top and sides to connect fill lights, microphones and other auxiliary shooting accessories.

Read more less

1. Suitable for Insta360 X4 silicone protective case, fully protects the camera and prevents scratches and bumps2. Compatible with lens protector: The opening of the lens is wide, a silicone cover of the body is installed, and the lens protector can also be disassembled and installed normally.3. Installing/removing the camera is comfortable and convenient. There is no need to remove the protective cover. The battery and USB protective cover can be directly removed and installed.4. Cooling holes on the back ensure heat dissipation5. The hole position is accurate, with reserved indicator lights/front, rear, left, and right sound pickup, and speaker hole position, which does not affect the normal use of the camera.6. The bottom of the protective case is designed to be flush with the camera. After the protective case is installed, the camera can also be placed upright, further protecting the camera body from scratches.7. The protective cover is scientifically designed to retain the original optical path of the camera lens, making the camera image without obvious black edges.8. The surface lubrication process of the protective cover is skin-friendly and delicate, improving the hand experience.9. The protective cover is designed with details such as button protrusions, button outlines, microphone outlines, speaker outlines, and button function graphics, highlighting quality everywhere.Specification:1. Material: silicone2. Dimensions: body case 124.8 x 49.2 x 28.7mm, lens case 52.8 x 48.3 x 59.3mm3. Weight: body case 14g, lens case 34.3g

Read more less

1. Extension POV mount designed for Insta360 GO 3 / GO 3S. 2. Made of high quality ABS materials, the skin contact part of the use of silicone material increases friction and non-slip, comfortable wear without pressure. 3. With magnetic connecting technique on this GO3 POV mount, say goodbye to the tedious installation and disassembly process, just one step to lock and one step to release! 4. Retractable mounting ears for a variety of head types, elongation can be achieved by pulling it apart forcefully, without any clasps. when not in use can be hung on the neck, lightweight, easy to carry, very suitable for travel and outdoor shooting. 5. The POV Mount supports vertical 360 degrees adjustment, easily unlocking a variety of shooting angles to capture the ideal picture

Read more less

1. Suitable for Insta360 X4 action camera aluminum alloy frame.Dual cold shoe openings and 1/4-inch threaded interface support expansion of fill lights, microphones, selfie sticks, etc.2. Magnetic quick-release interface and 1/4 thread interface, compatible with ACE Pro magnetic quick-release base3. A 1/4-inch threaded hole is reserved on the side of the rabbit cage, which can not only expand accessories, but also allow the X4 to be installed horizontally, lowering the center of gravity and enabling horizontal shooting.4. The battery slot has a complete opening. You can directly replace the battery and insert and remove the Micro SD card without dismantling the rabbit cage, which is convenient and fast.5. There are soft foams on the top and bottom of the rabbit cage. After the camera is installed, it can be firmly fixed.6. Use rubber rings to enhance screw damping. The screws will not loosen when riding motorcycles and bicycles, and there is no need to worry about the camera falling off the frame.7. Material: aluminum alloy8. Dimensions: 135.1 × 55.8 × 23.0 mm9. Weight: 50gPacking list:Metal rabbit cage x 1Lens cover x 1

Read more less

1. Made of high-quality PC plastic material, with a surface sun grain process to increase hardness and prevent scratching. 2. Wear-resistant, durable, and of high quality. 3. Excellent heat dissipation performance to prevent the camera from overheating and shutting down. 4. The bottom of the frame is equipped with a universal adapter and a 1/4-inch screw adapter base, widely compatible with motorcycle mounts, selfie sticks, handles, tripods, etc. 5. Side window design for practical convenience, allowing direct access to battery installation, charging connection, memory card replacement, and easy disassembly and assembly. 6. Cold shoe mounts added to the top and sides for connecting auxiliary shooting accessories such as fill lights and microphones.

Read more less

1. Suitable for Insta360 X4 storage bag, lightweight and portable, wear-resistant and scratch-resistant2. Side hole design allows you to charge the action camera without taking out the camera.3. Using traditional sewing technology, the lines are neatly and tightly stitched, and the zipper is smooth.4. The lens is designed to be raised on both sides of the body, which will not damage the lens.5. Internal fleece layer protection, shockproof and drop-proof6. Dimensions: 14.3 x 7.2 x 5.6cm7. Weight: 60.4g

Read more less

1. Variable interface, bottom 1/4 threaded port + folding GoPro interface 2 in 1, adapt to more accessories2. Built-in non-slip rubber pad, no damage to the camera, more stable3. Aluminum alloy material, lightweight and durable4. Horizontal mounting, unlocking more ways to play and view5. Material: aluminum alloy, silicone6. Weight: about 32g7. Size: about 7.85 x 4.7 x 2.1cm8. Description: only the bracket, does not include other items in the picture

Read more less

1. Silicone rubber fits tightly, safe and stable without injuring the machine2. Aluminum alloy + silicone, stable and durable3. Multi-film stackable, compatible with 49mm filters4. Material: aluminum alloy, silicone5. Adaptable to 49mm filters6. Weight: about 6g7. Size: about 52 x 6.8mm8. Note: only the holder is included, other items in the picture are not included

Read more less

1. Tailor-made design for Insta360 X4, molded on the real machine to fit the body;2. Equipped with a cold shoe port and a 1/4 screw port, which can be used to connect external equipment such as video lights and microphones;3. The bottom is equipped with a base interface, which can be connected to a variety of photography accessories such as tripods and selfie sticks;4. There are reserved windows on the side, so you can charge and replace the memory card when using the rabbit cage, making it quick and easy to disassemble and assemble.5. Main material: metal6. Net weight: 75g7. Product size: 14.2 x 5.7 x 2.2cmPacking list: rabbit cage metal frame x 1, lens protective cover x 1

Read more less

1. Suitable for Insta360 X4 mini body bag, it fits and protects your camera from scratches and friction2. Bottom opening design, can be directly connected to selfie sticks, tripods and other camera brackets3. Equipped with a mountaineering hook, which can be easily hung on a backpack when traveling and can be used anytime.4. The comfortable and soft velvet lining is shockproof and slightly waterproof, which can protect your lenses more comprehensively.5. Side opening design, compatible with various original accessories such as audio connectors, data cables, etc., without affecting use6. High-quality hard shell, effectively prevents rain intrusion and is durable.7. Material: membrane + flannel8. Weight: 52g9. Dimensions: 63 x 44 x 132mm/2.48 x 1.73 x 5.2inch

Read more less

1. Suitable for Insta360 X4 storage bag, lightweight and portable, wear-resistant and scratch-resistant2. Side hole design allows you to charge the action camera without taking out the camera.3. Using traditional sewing technology, the lines are neatly and tightly stitched, and the zipper is smooth.4. The lens is designed to be raised on both sides of the body, which will not damage the lens.5. Internal fleece layer protection, shockproof and drop-proof6. Dimensions: 14.3 x 7.2 x 5.6cm7. Weight: 60.4g

Read more less

1. Made of high-quality materials and durable;2. The cold shoe interface can be connected to external accessories, such as fill lights, microphones and other multi-functional expansion;3. Reserve a hole at the bottom to connect a 1/4 selfie stick, tripod, etc.;4. Small, lightweight and easy to carry.5. Main material: aluminum alloy6. Net weight: 7gPacking list: Cold shoe extension × 1

Read more less

1. Suitable for Insta360 X4 / X3 / One X2 selfie stick special cold shoe, specially designed for Rode Wireless GO wireless microphone, light and convenient, sturdy and durable2. Used in conjunction with a charging audio adapter, the microphone can be completely invisible in panoramic mode.3. All-aluminum alloy structure, sturdy and durable, with metallic texture4. Product size: 83 x 35 x 17mm5. Weight: 12gPacking list: cold shoe holder x 1, audio cable x 1

Read more less

1. Built-in strong magnet, quick disassembly, easy to use2. Thin and lightweight design, compact and portable3. Fixed by magnetic suction with claw buckle4. With anti-vibration silicone sheet, further strengthen the installation of quick release accessories firmly, easy to cope with high-intensity vibration scene5. Strong compatibility with accessories, small body, body silicone sleeve, rabbit cage, etc. with the use of6. The surface of the set is hand-feeling treatment, skin-friendly and delicate7. Supporting 1/4 threaded top cover, more diversified adaptable camera8. Material: metal9. Description: only the quick release parts + cover, does not include other items in the picture

Read more less

1. Built-in aluminum strips, silicone outer, can be folded out of any shape, fixed on a variety of objects2. Can be fixed on the desktop, railings, tree branches, shopping carts, arms, ballpark fences and other places, easy to unlock the creative way of play3. 1/4 inch screw interface, install the matching adapter, can provide three-jaw interface, compatible with more cameras4. Folding compact, easy to carry and storage5. Interface: 1/4 inch6. Material: aluminum alloy, silicone7. Weight: about 120g8. Size: about 51cm9. Description: only the bracket, does not include other items in the picture

Read more less