Repair Tools

1. Product Model: K-9208 (V24) 2. Product size :13.8 x 7.7 x 1.4cm 3. For iPhone 6P/6S/6SP/7G/7P/8G/8P/X/XS/XR/XS Max/11/11 Pro/11Pro Max/12/12 Mini/12 Pro/12Pro Max/13/13 Mini/13 Pro/13Pro Max/14/14 Plus/14 Pro/14Pro Max/15/15 Plus/15 Pro/15Pro Max 4. For Samsung/Xiaomi/Huawei/OnePlus/VIVO/OPPO, etc Android phones too 5. An intelligent chip is adopted to realize fast charging 6. With sleep wake-up function. Press the activate key to activate the battery during sleep. The battery can be used normally again 7. Support other charging equipment to avoid long-term occupation of electric energy meters and affecting maintenance work 8. Intelligent automatic identification of battery positive and negative poles. The positive and negative electrodes are connected in reverse, which does not burn the machine. It can be used directly after being fastened 9. Intelligent charging mode, in line with the lithium battery charging process 10. In the whole process of intelligent charging, without manual supervision, stop charging at full speed without worrying about the danger caused by excessive charging 11. The battery is fully charged with the automatic steering lamp, and the green lamp is used for real charging and is fully charged with the automatic steering lamp 12. Intelligently identify the short-circuit battery. In the case of a short-circuit, the red indicator lights up and turns off the power supply The fixture can work normally only when the input voltage is greater than the current battery voltage and the maximum charging current is 2A 13. Advanced design, safety, fast charging speed, and battery capacity can be charged to 100%, with accurate short-circuit judgment ability, shield all kinds of bad batteries for you, and greatly save your valuable time 14. According to the different conditions of the panel, the other functions are introduced respectively. If no power is connected, the following three situations will occur when the battery that needs to be charged is connected to the activation board: A. All the indicators of the activation board are off: the battery voltage is lower than 2.5V, (The activation board needs to be higher than 2.5V input to start working) B. Short circuit indicator light, indicating that the battery short circuit; C. The activation board power indicator lights up: the digital meter on the right shows the voltage number (the voltage is the current battery voltage) Note: Input voltage should not exceed 5V, Otherwise it will damage the battery life, only one battery can be charged each time

Read more less

1. USB power supply. USB connector, diverse properties, compatible with different device. convenient to use 2. UV light. curing ink fast. place the light shining 6s at the ink and curing 3. Lamp beads life of 10000 hours 4. Power: 10W 5. Size: 5 x 6.8cm

Read more less

1. External battery repair flex cable replacement part.2. Replace your broken or unusable one with a new one3. Each item has been checked and in good condition before shipping4. Completely fit and work5. Professional repair tools aim to give assistance during device repairing.

Read more less

1. Tool for testing the connectivity and functionality of the LCD display.2. Extend the wiring of the LCD display to allow technicians to easily test its functionality and connectivity during maintenance or installation processes.3. Assist in detecting connection issues between the LCD and the system, ensuring that the LCD functions properly and provides clear images.4. Cable are typically made of durable materials capable of withstanding the demands of long-term use and frequent connections.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Apple:  iPhone 14 Pro Max Package Weight One Package Weight 0.01kgs / 0.02lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 6.00kgs / 13.23lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

Read more less

1. Three Zhixi Network solves the problem of screen replacement pop-up windows of 11~14 series Apple mobile phones2. Grinding protection + tin planting two-in-one use3. Prevent damage to the screen and cables4. High-temperature resistance, fast and convenient5. Precise position, which is strong and durable, ensures a long service life

Read more less

1. Aax-17 chip tin planting tweezer, locate tin planting steel mesh, precisely clamp tin wire2. Sanding By Hand/Non-Magnetic/Precisely Clamp Wire/Stainless 3. Steel Material4. Suitable for integrating circuit maintenance and cooperating with microscope operation5. Anti-corrosion, heat-resistant, stainless steel material, groove design, tweezer surface texture, non-slip6. Comfortable feel, hard non-deformable, special tip point

Read more less

1. Electric glue removal tool, specially used to remove dry glue from mobile phone screens, convenient and fast.2. Simple operation, one-button start, saving energy and time3. The glue removal tool has an LCD digital display of gears and an eye-friendly blue light design. You can use it with confidence4. The motor supports forward/reverse rotation and is equipped with LED lights for easy operation at night.5. Power MAX: 5W6. Input type: Type-C7. Net weight: 219g

Read more less

1. One key can control the forward and reverse rotation, stop when you let go of the hand2. Push the cartridge type, magnetic absorber3. 4 LED lighting for shadowless operation, dark corners can become bright and clear4. CR-V high-strength precision batch bit, sturdy and durable5. Strong magnetic bit, high-precision and tight fit is not easy to fall offHandle parameters:1. Power supply type: rechargeable - lithium technology2. Voltage: 3.7V3. Scope of application: precision maintenance4. Battery capacity: 350mAh5. Charging time: less than 60 minutes, LED screen flashes when charging to show the current power level, no light when full6. No-load speed/current: 200rpm/100mAh7. Manual torque: more than 5N.m8. Electrical torque adjustment: 0.01-0.13N.m9. Fully charged continuous endurance: 90 minutes, standby endurance 90 daysAccessories list:- Batch bits x 64- Electrical handle x 1- Tweezer x 1- Pry bar x 1- Magnetic area for adding and subtracting x 1

Read more less

1. Excellent to change your faulty/broken parts2. Replace your faulty part and start using your device again3. UV Light must be used to cure the UV Glue, it literally hardens in about 30 seconds, but is recommended a cure time of about 3 minutes for a stronghold. Sunlight can be used too4. Professional repair tools aim to give assistance during device repair.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. For screen bracket rubber cutting and screen disassembling, etc.2. 3pcs/box3. Remover screen gap4. Polarizer cutting5. Soft flexible blade, supported by a comfortable PVC handle6. A perfect tool to easily disassemble mobile phones, useful in many situations

Read more less

1. All the screwdriver bits equipped hiding inside the handle. Equipped with tight rubber ring to seal the bits storage at any time as well, protacting the bits not easy to rust. Really make full use of the space, small and delicate.2. Practical detail design with precision CNC manufacturing. Stylish and burst with texture.3. Equipped with two-way module according to the ratchet principle, easy to use.4. Built-in high-precision bearings for a smooth rotation at every turn.5. SUS316 stainless steel casting is used for the joints, which is strong and powerful.6. Multi-use mode to meet multi-scene use.7. Accessories:- 1 x Screwdriver handle- Flat-head (Slotted): 1.5 / 2.0- Phillips: 1.5 / 2.0

Read more less

1. Battery adhesive + LCD frame waterproof adhesive, replace your broken or unusable item with a new one.2. 19 in 1 repair tool set, professional and practical.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Battery adhesive + LCD frame waterproof adhesive, replace your broken or unusable item with a new one.2. 19 in 1 repair tool set, professional and practical.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Black technology nano materials.2. Fast curing within 10 minutes,no need to hold pressure.3. Multi purpose, able to permanently bond various materials. suited for smart phone, electronic equipment.4. After curing, the adhesive layer has good toughness, is not easy to break, and is resistant to aging and oil stains.5. The surface to be bonded does not require strict degreasing treatment.

Read more less

1. Professional and practical, compact and portable. 2. Easy and convenient to carry and use. 3. Professional repair tools aim to giving assistance during devices repairing. 4. Applications: mobile phone, digital electronics. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. No need machine heating. 2. Glue gun can be used directly. 3. Single component glue gun: 55CC . 4. Liquid PUR glue: 30ML/pc. 5. Professional and practical, compact and portable. 6. Professional repair tools aim to giving assistance during devices repairing.

Read more less

1. Used in the LCD screen optical sealant 2. 20 seconds to UV curing quickly 3. Room temperature curing in 30 minutes 4. Under the irradiation of ultraviolet light, can quickly sclerosis and generate strong adhesion, the product has excellent flexibility, impact resistance, ageing resistance, water resistance and resistance to heat and cold. 5. Low odor, curing speed, high bonding strength.

Read more less

1. High mercury UV irradiation, a few seconds to dry. High mercury lamp can not sunlight (sun time will be longer, it is recommended 5 to 20 minutes)2. Low odor, high transparency, high bonding strength3. PMMA, PVC, ABS and other self-adhesive and stick each other, as well as glass, metal bonding between the surface dry better4. Capacity: 50g5. Can be sanded, filed and painted after fully cured

Read more less

1. Middle layer tin planting platform set for iPhone X / XS / XS Max / 11 / 11 Pro / 11 Pro Max / 12 / 12 Mini / 12 Pro / 12 Pro Max / 13 / 13 Mini / 13 Pro / 13 Pro Max / 14 / 14 Plus / 14 Pro / 14 Pro Max2. Super magnetic force / multi-model infinite extension base / precise positioning and close fit3. Precise positioning / fast tin planting / strong magnetic adsorption4. Built-in three high-temperature strong magnets, strong magnetic adsorption, precise positioning, no offset, high-temperature magnetism5. Steel material, round and square precise hole positions make the solder balls more rounded and prevent the mesh from jamming the solder balls6. Anti-drum, so that each solder ball is round and full, to meet the needs of various chips7. With precise positioning, it is more convenient to align the whole position8. Silicone material is used to effectively isolate temperature and prevent scalding9. The real machine is measured to ensure accuracy, and each detail, hole position, and mesh is proofread according to the original drawings to ensure that every solder joint cannot be missing

Read more less

1. Read screen info serial number automaticlly 2. Repair with/without the original screen 3. Read and write 12-14 series screen data 4. Read, write and repair screen data 5. Support multiple function boards extension 6. Connect to phone and read original factory info such as screen code, one key repair. 7. Note: This product needs to be used with a JC V1SE programmer(SKU: SPT9100)

Read more less

1. Support 8-13 Pro Max 2. Earpiece speaker flex cable detection 3. No require original receiver FPC 4. Speaker flex cable true tone repair 5. Note: This product needs to be used with a JC V1SE programmer(SKU: SPT9100)

Read more less

1. Including battery communication protocol, with battery serial number, display power2. Do not restart when power is on, work stably, support an in-depth measurement machine3. Solve the problem that the ordinary power cord of 8th generation or more does not restart into the system4. Ultra-low standby power consumption does not affect the judgment current of the repair machine5. Simulate the original battery cable, using a flexible FPC soft cable design6. Built-in core protection board to prevent short circuit burning7. Four-color wire classification, quickly find the corresponding model8. Support for iPhone 14/14 Plus/14 Pro/14 Pro Max/13/13 Pro/13Pro Max/13 Mini/12 Pro Max/12 Pro/12 Mini/12 /11 Pro Max/11 Pro/11/Xs Max/ Xs/XR/X/8 Plus/8/7 Plus/7/6S Plus/6S/6 Plus/6

Read more less

1. Input voltage: 3.7V2. Battery type: lithium battery, 350mAh3. The red light is on when charging, and the green light is on when charging4. Speed speed: 320r/min5. Manual torque: 3n.m, electric torque: 0.4-0.5N.M6. Full charge duration: 90 minutes, standby duration: 90 days

Read more less

1. Revolutionary updating of iCopy iPhone X-14 Series Face ID recovery and activation board 2. The activation board is compatible with previous iCopy devices, repairing Face ID is easy as changing an accessory, super friendly for beginners 3. Support a variety of flex cables with unlimited expansion 4. Flex cable is compatible with iPhone X Series, 11 Series, and 12 series, as, for other models, it keeps updating 5. This device supports QianLi is previous dot projector cable and X-14 series IC chipsets other models are being updated

Read more less

1. All-aluminum heating plate with uniform heating and stable performance 2. A heating platform that can meet the separation of PC and mobile phone screens within 17 inches 3. Unique special silicone pad, lip sealing ring super sealing 4. Porous design to meet the needs of various screen sizes 5. Built-in double air pump separator, single or double air pumps at the same time 6. Front panel design for simple, easy, and fast operation 7. Real-time adjustable and visible temperature, fast, convenient, and efficient 8. Large full aluminum heating plate for even heating and stable performance 9. This Vacuum LCD Separator with Vacuum Pump Built-in gets rid not only of the traditional fixture clamps or screws but of the heavy Vacuum Pump 10. Safety power system inside, avoiding the electric leakage problem 11. Anti-static body material prevents the LCD and the flex cable from being damaged by the static 12. Easy to operate, manual separating 13. Smooth metal plate to hold the touch screen without any damaged 14. Compatible with LCD or LED screen assembly 15. Power: 280W 16. Temperature range: 40~250 degrees centigrade 17. Package includes: - 1 x Screen separator machine - 1 x Power cable - 1 x Silicone pad

Read more less

1. This rosin atomization machine is a very practical tool for detecting circuit board short circuit in your daily and work. 2. Just with this tool, you can quickly detect the fault point. 3. Pen-type design, comfortable for you to hold, give you a better user experience. 4. Easy to operate: Put the small rosin (Not included) into the machine and after pressing the button for 5 times, long press the button to starting the machine to use, no need the soldering iron. 5. Built-in lithium battery, you can recharge it in time for a long period of using time. 6. Small in size and easy to carry, you can put it into your tool box to store and carry. 7. It is easy for you to operate and will not damage the motherboard, and the operations are simple, no need for too many professional skills.

Read more less

1. Not easy to deform, prevent heating and bulging accurate hole position, one-time molding 2. Good toughness 3. High temperature resistance 4. 0.12mm, make phone repairs easier, make reballing work easier. 5. Heated anti-drum design

Read more less

1. Professional and practical. 2. Professional repair tools aim to giving assistance during devices repairing. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping 5. Professional installation or test is highly recommended.

Read more less

1. Professional and practical. 2. Professional repair tools aim to giving assistance during devices repairing. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping 5. Professional installation or test is highly recommended.

Read more less

1. Connect to the motherboard of the mobile phone and use it immediately. 2. One to One Reduction(Simulate restore the original battery cable buckle). 3. Support IP Models: for iPhone 5/5s/6/6 Plus/6s Plus/7/7 Plus/8/8 Plus/X/XR/XS/XS Max/11/11 Pro/11 Pro Max/12/12 mini/12 Pro/12 Pro Max /iPad mini 1/iPad mini 2/iPad mini 3/iPad mini 4. 4. Adopt thick pure copper wire core, stable and durable. 5. Voltage:3.7-5V. 6. Current:0-10A.

Read more less

1. Suitable for iPhone/Samsung/Huawei/Xiaomi rear camera glass lens blasting2. No damage to mobile phone accessories3. No longer worry about piercing the back shell with too much force4. Adjustable intensity5. Multiple waterproof/dustproof design6. Dimensions: 13 x 115 mm

Read more less

1. Grinding head diameter: 2.35MM 2. Power: 10W 3. Speed: 5000-10000- 18000 three gears 4. The use time is more than 1 hour without load in the third gear 5. Automatic Shut Off When Fully Charging 6. Battery capacity: 300mA

Read more less

1. It is made of high quality material to ensure its safety, reliability and efficiency 2. Compact design and lightweight 3. Extremely durable and useful 4. High effective and reliable to use 5. Package includes: -1 x Opening stick -1 x Opening Pick -1 x Suction cup -1 x Repair Holder -1 x Battery pry -1 x Pentalobe 0.8 screwdriver -1 x Cross 1.5 screwdriver -1 x Tri-point 0.6 screwdriver -1 x SIM eject pin -1 x Battery adhesive -1 x Waterproof adhesive

Read more less

1. It is made of high quality material to ensure its safety, reliability and efficiency 2. Compact design and lightweight 3. Extremely durable and useful 4. High effective and reliable to use 5. Package includes: -1 x Opening stick -1 x Opening Pick -1 x Suction cup -1 x Repair Holder -1 x Battery pry -1 x Pentalobe 0.8 screwdriver -1 x Cross 1.5 screwdriver -1 x Tri-point 0.6 screwdriver -1 x SIM eject pin -1 x Battery adhesive -1 x Waterproof adhesive

Read more less

1. Number of pieces included: 160 in 1.2. Material: Chrome vanadium alloy steel.3. System: Metric system.4. Portability: The cloth bag is of portable style, which is very convenient to carry at home or anytime.5.Package includes screwdriver bit:- Hexagon: high 0.7 x 3 / high 0.9 x 3 / high 1.3 x 2 / high 1.5 / H2.0 / H2.5 / H3.0 / H4.0 / H4.5 / H5.0 / H6.0.- Nut driver: 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5.- Flathead: 1.0 x 3 / 1.2 x 3 / 1.5 x 3 / 2.0 x 2 / 2.5 x 2 / 3.0 / 3.5 x 2 / 4.0 x 2.- Philips: PH000 x 3 / PH00 x 3 / PH0 x 2 / PH1 x 2 / PH2 x 2.- Plum blossom: T2 x 2 / T3 x 2 / T4 x 2 / T5 x 2 / T6 x 2 / T7 x 2.- Plum safety: T8 x 2 / T9 x 2 / T10 x 2 / T15 x 2 / T20 x 2.- Three wings: Y0.6 x 3 / Y1.0 x 3 / Y2.0 x 2 / Y2.5 x 2 / Y3.5 x 2 / Y4.0 x 2.- Five square rule: 0.8 x 3 / 1.2 x 3 / 1.5 x 2.- Square: S0 / S1 / S2 / S3.- U shape: U2.6 / U3.0- Triangle: 2.0 / 2.3 / 2.6 / 3.0- SIM card ejection drill: 0.8mm- Anti-Philips: PH2Package contains:- 140 x Bits of various specifications- 1 x rubber suction cup- 1 x fiber nylon crowbar- 1 x crowbar- 1 x Steel pry bar with rubber handle- 2 x blue double-ended plastic crowbar- 1 x card picking pin- 6 x triangle- 1 x magnetic pad- 1 x non-slip screwdriver handle- 1 x Flexible shaft extension rod- 1 x 1/4 inch screwdriver adapter- 1 x ESD wrist strap- x Demagnetizer- 1 x ESD tweezers- 1 x Portable Oxford bag

Read more less

1. Model: TBK-983A 2. Power:300W 3. This machine do not need to be connected to extra air compressor 4. Suck-back feature ensures no dripping 5. Manual or timer operation modes 6. Foot pedal-controlled 7. Designed for a wide range of application as EFD, I&J Fisnar 8. Timer mode dispensing time 0.01-99.99 seconds 9. Timer mode cycle time 0.1-9.9 seconds 10. Much lower noise, Much smaller size 11. Dispenses at intervals, Dispensing time is fixed 12. Vacuum suction reversely, Glue dispenses evenly 13. High precision pressure regulating valve and barometer 14. Applicable to a variety of industries and suitable with various glues in the market 15. Freely attaching Syringe (3pcs) and Needle (12 pcs) 16. Minimum Amount of Glue : 0.01ML 17. Interval Time : 0.1-9.9S 18. Product size: 290 x 220 x 175 mm

Read more less

1. Four-claw design,not easy to fall off when gripping tiny components and chip 2. Used to pick up IC chip components,make your repair work easily 3. Easy to use,just press the top then four claws appear

Read more less

1. Holding loose parts, helps to keep glued parts til the glue dries 2. A great aid in mobile phone repairing

Read more less

1. High-precision LED digital display, intuitive and clear. 2. Excellent heat dissipation. 3. The use of advanced technology to effectively reduce the weight of the power and convenience of mobile power. 4. Output voltage:0-15V DC 5. Overcurrent protection function: yes

Read more less

Type:CombinationNotice:Not Include Other Parts, Only Tool Box1. Material: plastic2. Net weight: 410 g3. Size: 200 x 175 x 160mm4. Application: repair tools 5. Style: multifunction6. The storage box can be equipped with various accessories, screwdrivers, pliers, etc.

Read more less

1. Material: plastic2. Size: 10 cm long and 5 cm wide3. Weight: 18g4. After the phone is dropped, the case is often tilted to open the screen! When repairing, usually use B7000 adhesive to bond, but this type of adhesive is generally slow-drying, and it can be fully adhered for more than half an hour. This fixing clip fixes the casing and the screen!5. Features: universal plastic clip fixture for cell phone repair. The adjustable stand fits most mobile phone screens and tablet screens.

Read more less

1. 395nm wavelength ultraviolet light, 4W power, 10 seconds curing 2. The display can show the battery status 3. Customizable duration 4. Widely used, it can be used for currency detection, resin adhesive/UV adhesive/optical adhesive/photosensitive green oil/shadowless adhesive/ink curing, fluorescent agent detection 5. Portable Product parameters: 1. Charging interface: Type-C 2. Input voltage: 5V 3. Battery capacity: 800mAh 4. Timing: 1-30 seconds (can be customized) 5. Dimensions: 50x50x57mm 6. Weight: 159g

Read more less

1. This instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage, charging time and other data of USB 2. Supports Qualcomm QC3.0 compatible QC2.0, Bc1.2, and Apple 2.4A and other protocol quick charging voltage ranges 3. Support OTG function 4. Time to refresh: 500mS/ times 5. Measurement rate: 0.5 times/s

Read more less

1. Light design helps to position DOE 2. Assemble flex of dot projector 3. Anti-scalding fast clamping module 4. Fast positioning of flex assembly 5. Face ID/ture tone reballing stencil 6. Special dot projector fixture, anti-scalding 7. Light design helps to position DOE 8. Dot projector/true tone laser reballing stencils 9. Flex cables groove design

Read more less

1. This Squeegee tool is widely used in pad pasting, wallpaper pasting, glass cleaning. 2. Remove the air bubbles of film effectively. 3. Firmly and serviceable, not hurt the paster and glass. 4. Made of PP, long term use. 5. Convenient to use.

Read more less

1. Used to locate and relocate mobile phone PCB BGA parts 2. Conveniently and quickly re-bombard the BGA without causing any damage, providing a solution for iPhone 11 BGA repositioning and repair 3. Strong magnetic adsorption, simple operation 4. The stencil will not deform under high temperature 5. Fast and convenient soldering

Read more less

1. Clear hard contaminants, circuit boards, optical lenses and other electronic products 2. Clear static-sensitive components pollutants 3. Clear effluent residue and excess material 4. Can effectively clean small and difficult to position 5. Size: length:70mm, width:3mm

Read more less

1. This is the inevitable adhesive which holds the touch screen in position 2. Heat-Resistant, easy to adhesive, strong adhesive ability 3. Adhesive Type: Pressure sensitive double sided 4. Width: 2mm 5. Length: 50m 6. Tape diameter: 16.5cm

Read more less