DJI Mavic Series

1. Made by 3D printing, the joystick of the drone can be fixed at an angle through the knob, so that the drone can be fixed at a fixed speed to facilitate shooting time-lapse works.2. Material: plastic3. Net weight 11g4. Product size 3 x 2 x 1.2cm5. Note: only 2 fixed speed brackets are included, no other

Read more less

1. Fully enclosed design, anti-scratch and anti-scratch safety upgrade2. Prevent oxidation short circuit, prevent the battery from being exposed to moisture and oxidation for a long time3. Dustproof and waterproof, prevent foreign objects, prevent conductive particles from entering the battery and cause short circuit4. Soft silicone, will not scratch the contacts, closely fit with the interface5. Intimate finger design, easy to install and remove6. It can be used as a battery base, so that the battery can stand upright on the desktop7. Tear-resistant and not deformed, durable8. Applicable models: suitable for Mini 3 Pro9. Material: Silicone10. Specifications: 3 packs11. Dimensions: 46 x 28 x 16mm12. Weight: about 9g/pcs13. Note: The product contains only the protective cover, nothing else

Read more less

DJI Cellular Module:1. You can connect your equipment to 4G network for networking, enhanced map transmission, network RTK and many other functions. This module provides you with high-speed and stable networking services and supports most 4G bands worldwide2. This product does not include a SIM card3. When using the enhanced map transmission, please make sure to operate the drone in a place where the remote control or cell phone 4G signal is near full.4. Compatible products: for DJI Mavic 3 Classic/DJI Mavic 3/DJI Mavic 3 Cine/DJI RC Pro/DJI Mavic 3 Module installation kit:1. Use with DJI Cellular module to securely mount on DJI Mini 3 Pro.2. When using with the DJI RC-N1 remote control, make sure the phone connected to the remote control is connected to the 4G network.3. When using with DJI RC, make sure DJI RC is connected to 4G network by connecting to Wi-Fi hotspot of cell phone.4. Applicable products: For DJI Mini 3 Pro

Read more less

1. Made of high quality material, good toughness2. Separate the propeller from the outside to prevent the propeller from accidentally hurting people and things, and at the same time prevent foreign objects from hitting the propeller to improve flight safety3. Exquisite design, can be disassembled quickly4. Radius: 157mm5. Dimensions after installation: 634 × 549 × 108.5mm6. Weight: 58g/side7. Applicable models: DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine8. Packing list: propeller cover x 1 set(4 pieces)

Read more less

1. Suitable for a variety of drones: any drone that can carry a load of more than 100g can be carried2. 2.4G remote control, one-click placement, simple operation3. Scientific and lightweight design, does not affect flight speed4. Built-in 350 mAh/3.7V battery, USB charging port5. Installation with hook and loop fastener straps does not damage the fuselage and is convenient and quick6. Loading weight: up to 750g7. Usage time: about 12 hours8. Charging time: about 90 minutes9. Product size: 55 x 54 x 26mm

Read more less

1. Material: aluminum alloy2. It can prevent the motor from entering dust and being splashed by water3. Each motor cover does not weigh more than 1g and will not increase the weight4. It fits closely with the motor and plays a good role of shielding on the top5. The miraculously raised blade design can effectively prevent the blade from scratching the fuselage6. Simple installationNote: The product only has a motor cover and does not contain other items

Read more less

1. Material: aluminum alloy2. It can prevent the motor from entering dust and being splashed by water3. Each motor cover does not weigh more than 1g and will not increase the weight4. It fits closely with the motor and plays a good role of shielding on the top5. The miraculously raised blade design can effectively prevent the blade from scratching the fuselage6. Simple installationNote: The product only has a motor cover and does not contain other items

Read more less

1. Effectively fix and protect the blades. Fix the propeller to the fuselage for easy portability and avoid damage to the propeller during storage.2. The fuselage design is integrated, and it fits the fuselage line like one, without squeezing the propeller at all.3. Soft fit, safe and non-destructive, the silicone beam paddle will not scratch and squeeze the slender paddles and body.4. Buckle design, easy to disassemble5. Material: Silicone6. Compatible with DJI Mavic 3

Read more less

1. Effectively fix and protect the blades. Fix the propeller to the fuselage for easy portability and avoid damage to the propeller during storage.2. The fuselage design is integrated, and it fits the fuselage line like one, without squeezing the propeller at all.3. Soft fit, safe and non-destructive, the silicone beam paddle will not scratch and squeeze the slender paddles and body.4. Buckle design, easy to disassemble5. Material: Silicone6. Compatible with DJI Mavic 3

Read more less

1. Imported high-quality three-core high-brightness LED is used as the light-emitting element, which has a longer service life and higher brightness2. Brightness: 300 lumens3. Power supply mode: 1 AA battery (the product does not contain batteries)4. Note: The product only contains aerial photography lights, excluding drones and batteries, etc.5. Weight: about 70g

Read more less

Features1. Free your hands and make aerial flight easier 2. The double hook bracket is firm and durable to prevent falling off 3. Lightweight and portable, easy to carry 4. Adjustable length lanyard, users can switch needs according to the scene 5. Soft cloth, comfortable hanging neck, suitable length of hanging neck 6. Will not affect the operation of the remote control, will not affect the phone clip, will not block the screen of the phoneSpecifications1. Material: High elastic waterproof foam 2. Applicable Model: For DJI Mini 3 Pro Remote Control 3. Strap Length Range: 25-46cm 4. Weight: 134.1gPackage List1. Lanyard x 1 2. Screw Rod x 2 3. Storage Bag x 1

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Made of environmentally friendly plastic material, 3D printing process, with fine stripes on the surface (not rough due to the process)2. After use, you can increase the remote control joystick stroke to improve the joystick control sensitivity3. This accessory is only suitable for DJI Mini 3 Pro, Mavic Mini 2 and Mavic Air 2 and large-screen remote controls, not compatible with other remote controls.4. Joystick height: 35mm5. Weight: 10g6. Note: The product only includes 2 extended joysticks, no other

Read more less

1. Solve the problem that the remote control does not have a hook, it is easy to install, and it can be stored without disassembly, making the flight worry-free!2. Reserve the data cable outlet, and install it in the groove without affecting the installation of the mobile phone3. Buckle weight: about 8.8g4. Buckle size: about 6.8 x 4.7 x 1.4cm5. The lanyard is 120cm long, with an adjustment buckle, the length can be adjusted

Read more less

1. No need to disassemble after installation, save trouble, the data cable can be folded inside2. Reserve the data cable outlet, and install it in the groove without affecting the installation of the mobile phone3. Three card positions are installed, the force is even, and the use is longer4. The matching lanyard strap has an adjustable lanyard buckle that can be stretched or shortened as needed5. Product size: 6.8 x 4.7 x 1.4 cm, rope length 42-59 cm6. Weight: 8.8 grams

Read more less

1. Solve the problem that the remote control does not have a hook, it is easy to install, and it can be stored without disassembly, making the flight worry-free!2. Reserve the data cable outlet, and install it in the groove without affecting the installation of the mobile phone3. Buckle weight: about 8.8g4. Buckle size: about 6.8 x 4.7 x 1.4cm5. The lanyard is 120cm long, with an adjustment buckle, the length can be adjusted

Read more less

1. Compatible remotes: for DJI Mavic Air 2, Mini 2 and remote with screen2. Easy to disassemble and assemble, feel comfortable3. Ergonomic design, sensitive control4. The height can be freely stretched from 2.6-3.2 cm5. CNC machining, fine craftsmanship, top grinding treatment feels good6. Main material: aluminum alloy7. Net weight: 4.8G8. Shipping List: joystick x 2, box x 1

Read more less

1. Solve the problem that the remote control does not have a hook, it is easy to install, and it can be stored without disassembly, making the flight worry-free!2. Reserve the data cable outlet, and install it in the groove without affecting the installation of the mobile phone3. Buckle weight: about 8.8g4. Buckle size: about 6.8 x 4.7 x 1.4cm5. The lanyard is 120cm long, with an adjustment buckle, the length can be adjusted

Read more less

1. Function: provide greater resistance to the joystick of the remote control and improve the control feel.2. It is fixed with strong non-marking double-sided tape, which does not need to be removed for one installation, and does not affect normal storage.3. Compatible remote control: suitable for DJI Mavic 3,Mavic Air 2, Mavic Air 2s, Mavic Mini 24. Net weight 9 grams5. Product size 40 x 40 x 15mm6. Note: The product includes 2 circular resistance controllers + 14 rubber bands, but does not include the remote control.

Read more less

1. Support USB-A and Type-C ports, dual-port charging, saving time and worry2. Built-in intelligent security chip, all-round protection of equipment and avoid potential security risks3. Gallium nitride support, smaller size and lower temperature4. Applicable models: suitable for DJI Mini 2/Mini 3 Pro5. Material: ABS6. Input: 100-240V 50/60Hz, 0.8A7. Type-C output: 5V 3A, 9V 3A, 15V 2A, 20V 1.5A, 30W Max8. USB-A output: 5V 3A, 9V 2A, 12V 1.5A, 18W Max9. USB-C&USB-A output: 5V 4A 20W10. Dimensions: 6.2 x 5.9 x 2.6 cm11. Weight: 76.8 grams

Read more less

1. Effectively avoid crashes caused by high-speed rotating blades injuring people or damage to the blades during flight. 2. Effectively protect the blades from being scratched or broken. 3. The light weight does not affect the normal flight of the drone. 4. ABS PC material, fine workmanship, has a certain elasticity, easy to disassemble. 5. Dimensions: 32.9 x 4.78 x 12.9cm

Read more less

Features1. Bundled quick release and convenient design 2. PU material, soft and does not hurt the machine 3. Buckle the paddle can also be stored in the waterproof box, storage bag, small size 4. Lightweight and easy to carry, will not increase the drone weight 5. Effectively protects the propellers when during transport or storageSpecifications1. Material: PU 2. Size: 26.00 x 4.00 x 0.90cm / 10.24 in x 1.57 in x 0.35 in 3. Weight: 8.2g

Read more less

1. Silicone mold is integrally formed, soft and does not hurt the machine;2. Effectively prevent dust from entering the charging port after use, dust-proof, moisture-proof and short-circuit proof;3. It will not fall off easily after installation, use it with confidence.4. Weight: 0.5g/pc5. Product size: 1 x 0.6 x 0.4cm6. Packing: electrostatic bag7. Note: The product is only a dust plug, does not include other

Read more less

1. Hard plastic shell with soft sponge on the inner wall to prevent foreign objects from entering2. Prevent short circuit and prevent battery contacts from being exposed to moisture and oxidation for a long time3. Net weight: 6 grams4. Product size: 4.5 x 4 x 1cm5. Note: The product includes 2 battery covers and round blank stickers, you can write the serial number with a pen as the battery number, excluding batteries and drones.

Read more less

1. Delicate and compact, easy to carry2. Enhance the remote control signal to effectively extend the flight distance3. Plug and play, simple and quick installation and disassembly, non-destructive installation design4. Silicone material, moderately flexible, not easy to be deformed, and bending does not affect the use5. The socket is fixed and tightened, which is easy to install and not easy to loosen.6. Material: silicone, copper/aluminum7. Applicable models: suitable for DJI Mini SE/MAVIC 2/Pro/Air8. Weight: about 21.5 grams9. Size: about 7.4 x 2.5 x 2.1cm

Read more less

1. Delicate and compact, easy to carry2. Enhance the remote control signal to effectively extend the flight distance2. Copper material, high strength, high hardness and good electrical conductivity3. Silicone material, moderately flexible, not easy to be deformed, and bending does not affect the use4. The socket is fixed and tightened, which is easy to install and not easy to loosen.5. Plug and play, simple and quick installation and disassembly, non-destructive installation design6. Material: silicone, copper, ABS7. Applicable models: suitable for DJI MAVIC Mini/2/Pro/Air8. Weight: about 47 grams9. Dimensions: antenna is about 7.4 x 2.5 x 2.1cm, mirror surface is about 6 x 6 x 2.8cm

Read more less

1. Delicate and compact, easy to carry2. Enhance the remote control signal to effectively extend the flight distance3. Plug and play, simple and quick installation and disassembly, non-destructive installation design4. Silicone material, moderately flexible, not easy to be deformed, and bending does not affect the use5. The socket is fixed and tightened, which is easy to install and not easy to loosen.6. Material: silicone, copper/aluminum7. Applicable models: suitable for DJI Mini SE/MAVIC 2/Pro/Air8. Weight: about 21.5 grams9. Size: about 7.4 x 2.5 x 2.1cm

Read more less

About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1

Read more less

1. The external silicone protective cover is effectively anti-drop, shock-resistant and scratch-resistant, reducing damage and making use and storage more worry-free, 2. The reinforced rib surface design can be kneaded at will without changing shape, 3. The surface is sprayed with touch oil, which is as moisturizing as baby skin, beautiful and comfortable, 4. The precise hole position and the remote controller are just right for integration, coordination and beauty, without affecting the flight control, 5. Flexible and elastic, easy to disassemble and install. 6. Applicable models: For DJI RC (For DJI Mavic 3 Classic, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mini 3 Pro, DJI Mini 3, DJI Air 2S)

Read more less

Features1. Free your hands and make aerial flight easier, 2. A variety of styles are available, the hanging neck is comfortable, 3. Stainless steel screws, durable and anti-dropping, 4. It is comfortable to wear, the longest length can be adjusted to 70cm, and the adjustable buckle conforms to the wearing habits of different people.Specifications1. Material: Nylon cloth+aluminum alloy+stainless steel 2. Applicable models: For Mini 3 pro /Air 2S/Air 2/Mavic 2 Remote Control 3. Color: Black 4. Net weight: 133.7g 5. Product size: 56x4cm (fold in half), 40~70cm (adjustment range)Notes1. Does not include the Smart Controller, 2. Transition: 1cm=10mm=0.39inch, 3. Please allow 1-3mm error due to manual measurement. please make sure you do not mind before ordering, 4. Due to the difference between different monitors, the picture may not reflect the actual color of the item, please make sure you do not mind before ordering, Thank you!

Read more less

1. The Mavic Air 2 Intelligent Flight Battery provides a maximum flight time of 31 minutes for DJI Air 2S (34 minutes for Mavic Air 2).2. With a built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real time, allowing you to focus less on power levels and more on flying.3. It also features overcharging and overdischarging protection as well as low-temperature protection.Specifications:1. Battery Type: Three-cell polymer lithium-ion battery2. Rated Capacity: 3500 mAh, 40.42 Wh (typical value)3. Rated Voltage: 11.55 V4. Charging Voltage Limit: 13.2 V5. Discharge Temperature: -10-60 Celsius (14 - 140 Fahrenheit)6. Charge Temperature: 5- 40 Celsius (23-113 Fahrenheit)7. Compatibility:-DJI Air 2S-Mavic Air 2

Read more less

1. High-quality environmentally friendly silicone protective case, effectively anti-fall, anti-shock, anti-scratch, reducing damage, making use and storage more worry-free. 2. Reinforced gluten surface design, can be kneaded at will without deformation. 3. The surface is sprayed with oil, which is as moist as baby skin, beautiful and comfortable. 4. The precise hole position and the remote control are just right, harmonious and beautiful, without affecting the flight control. 5. Flexible and elastic, easy to disassemble and assemble. Warmth tips: This product only contains a silicone protective case and does not include the RC 2 remote control shown in the picture.

Read more less

1. One-touch switch, support brightness adjustment, provide long-distance lighting and searching2. Flashing bright light, support the adjustment of strobe brightness and flashing frequency3. Controllable PTZ, support PTZ 0 - 85 degrees control, support PTZ and camera linkage4. Interface: SDK interface5. Lighting power: 30W6. Protection level: IP4X7. Support models: for DJI Mavic 3E / Mavic 3T8. Lighting mode: combined lighting9. Lighting angle: 14 degrees10. Head: single-axis stabilized gimbal11. Mounting method: quick release screws12. Operating temperature: -10 - 50 degrees Celsius13. Illumination distance: about 50m, 100m, 150m14. Center illumination: 24Lux, 5Lux, 2.5Lux15. Battery capacity: 1500mAh16. Charging port: Type-C17. Size: about 13.2 x 4.3 x 6.4cm18. Weight: about 110g

Read more less

1. Silicone protective case with hood, which can not only protect the remote control, screen, but also effectively block light2. Anti-slip texture design. When flying outdoors, it can effectively prevent the hands from sweating and slipping, and it is safer and more comfortable to hold.3. Reserve antenna holes, which will not affect the signal4. Anti-scratch, anti-drop and dust-proof, soft silicone protective cover to prevent foreign objects from colliding and scratching the remote control5. Reinforcing rib design, can be kneaded at will, not collapsed or deformed6. Soft silicone hood, does not affect the joystick7. Easy to disassemble and install, tear-resistant and not deformed8. Special surface treatment, beautiful and elegant, silky feel, easy to clean9. Applicable models: suitable for Mini 3 Pro DJI RC10. Material: Silicone11. Note: The product only includes protective case, nothing else12. Net weight: with hood: 60g, without hood: 88g13. Gross weight: with hood: 67g, without hood: 94g

Read more less

1. Silicone protective case with hood, which can not only protect the remote control, screen, but also effectively block light2. Anti-slip texture design. When flying outdoors, it can effectively prevent the hands from sweating and slipping, and it is safer and more comfortable to hold.3. Reserve antenna holes, which will not affect the signal4. Anti-scratch, anti-drop and dust-proof, soft silicone protective cover to prevent foreign objects from colliding and scratching the remote control5. Reinforcing rib design, can be kneaded at will, not collapsed or deformed6. Soft silicone hood, does not affect the joystick7. Easy to disassemble and install, tear-resistant and not deformed8. Special surface treatment, beautiful and elegant, silky feel, easy to clean9. Applicable models: suitable for Mini 3 Pro DJI RC10. Material: Silicone11. Note: The product only includes protective case, nothing else12. Net weight: with hood: 60g, without hood: 88g13. Gross weight: with hood: 67g, without hood: 94g

Read more less

1. The same as the original joystick, it can be stored in the remote control2. Aviation aluminum alloy material, high hardness and durable3. CNC precision machining, anodized coloring process4. Ergonomic design, knurled non-slip, comfortable to use5. Material: aluminum alloy6. Applicable models: for Mini 3 Pro DJI RC remote control7. Note: The product only includes a pair of thumb sticks, nothing else8. Weight: about 2g/pair

Read more less

1. The same as the original joystick, it can be stored in the remote control2. Aviation aluminum alloy material, high hardness and durable3. CNC precision machining, anodized coloring process4. Ergonomic design, knurled non-slip, comfortable to use5. Material: aluminum alloy6. Applicable models: for Mini 3 Pro DJI RC remote control7. Note: The product only includes a pair of thumb sticks, nothing else8. Weight: about 2g/pair

Read more less

1. The same as the original joystick, it can be stored in the remote control2. Aviation aluminum alloy material, high hardness and durable3. CNC precision machining, anodized coloring process4. Ergonomic design, knurled non-slip, comfortable to use5. Material: aluminum alloy6. Applicable models: for Mini 3 Pro DJI RC remote control7. Note: The product only includes a pair of thumb sticks, nothing else8. Weight: about 2g/pair

Read more less

1. CNC finishing aluminum alloy hanging buckle, high strength and hardness, durable and more secure2. Leather lanyard, low-key matte texture, delicate touch; precision craftsmanship, safe and reliable3. Three-hole multi-purpose hanging buckle, single and double buckle lanyards can be switched at will4. No disassembly and storage, one installation for continuous use5. Does not block the hole position and does not affect the wiring6. Comfortable decompression, release hands, safe and reliable7. Microfiber lining, delicate and soft, comfortable texture8. High-density braided belt, wear-resistant, long-term carrying, durable9. Metal-resistant hook, high strength and strong bearing capacity10. Exquisite craftsmanship, tight sewing, strict edging11. Material: PU leather + aluminum alloy12. Applicable models: for Mini 3 Pro13. Fold length: 62.5-80cm14. Gross weight: 85g

Read more less

1. Universal remote control; suitable for DJI RC/DJI RC PRO/DJI remote control with screen2. Leather lanyard, low-key matte texture, delicate touch; precision craftsmanship, safe and reliable3. Foldable hanging buckle, no need to disassemble and store; no need to repeatedly disassemble and install the hanging buckle, it can be directly stored with the remote control4. Comfortable decompression, release hands, safe and reliable5. High-strength metal buckle, thread locking; durable, tightly installed, more assured to use6. A soft gasket is attached to prevent scratching the remote control7. Microfiber lining, delicate and soft, comfortable texture8. High-density braided belt, wear-resistant, long-term carrying, durable9. Metal-resistant hook, high strength and strong bearing capacity10. Exquisite craftsmanship, tight sewing, strict edging11. Material: PU leather12. Applicable models: suitable for Mini 3 Pro13. Fold length: 62.5-80cm14. Gross weight: 72g

Read more less

1. 9H high-hardness tempered glass, high-strength explosion-proof impact resistance is safer2. High-definition and high-transparency, clearly restore the rich colors of the screen3. Anti-fingerprint, dust-proof, oil-proof4. Using hydrophobic and oil-proof technology, effectively protect your screen from oil, dust, fingerprint erosion5. 2.5D arc edge, uniform force, rounded edge and smooth hand feeling6. Material: tempered glass7. Applicable models: for DJI Mini 3 Pro RC remote control with screen8. Gross weight: 38g

Read more less

Mounts:1. Can be mounted for GoPro 10 / GoPro 9 / GoPro 8 / Action 2 / Insta360 GO 2 / 1 / Searchlight and other devices2. One-piece molding, locking the fuselage, and stable installation; will not block the vision system and sensing system at the bottom of the drone3. Can be used with Sunnylife searchlight4. Comes with a 1/4 adapter, which can directly install searchlights and other equipment with 1/4 screw holes at the bottom5. There is a soft pad inside to prevent scratching the body6. Material: plastic7. Applicable models: suitable for Mini 3 Pro8. Net weight: 27g (including long screws)9. Gross weight: 51gSearchlight:1. 3 kinds of brightness controllable to meet the needs of different scenes2. Power supply mode: USB charging / built-in lithium battery3. Battery capacity: 800mah4. Use time: about 48-180 minutes5. Charging time: about 1.5 hours8. Charging current: 650mA9. Dimensions: 38x46x39mm

Read more less

1. Prevent collision and scratches, exquisite and ultra-thin2. Full screen protection, anti-shock, anti-shatter, impact explosion-proof, can resist most daily bumps3. Nano plexiglass membrane design4. Material: PET5. Applicable models: for Mini 3 Pro6. Size: 17 x 9 x 2cm7. Weight: 13.5g

Read more less

1. More precise control and smoother movement. 2. It is about 8mm higher than the original joystick, the swing range is larger at the same angle, and the control is more precise. 3. Aviation aluminum alloy material, high hardness and durable. 4. CNC finishing, anodized coloring process. 5. Ergonomic design, knurled non-slip, comfortable to use. 6. Light weight 1 pair only weighs 3g.

Read more less

1. More precise control and smoother movement. 2. It is about 8mm higher than the original joystick, the swing range is larger at the same angle, and the control is more precise. 3. Aviation aluminum alloy material, high hardness and durable. 4. CNC finishing, anodized coloring process. 5. Ergonomic design, knurled non-slip, comfortable to use. 6. Light weight 1 pair only weighs 3g.

Read more less

1. More precise control and smoother movement. 2. It is about 8mm higher than the original joystick, the swing range is larger at the same angle, and the control is more precise. 3. Aviation aluminum alloy material, high hardness and durable. 4. CNC finishing, anodized coloring process. 5. Ergonomic design, knurled non-slip, comfortable to use. 6. Light weight 1 pair only weighs 3g.

Read more less

1. When taking off or landing by hand, the hand guard can effectively isolate the blades, so you can hold it with confidence2. Expand and mount a good partner. Can be used for Sunnylife Insta360 GO 2 mounting straps, safe to hold without fear of damage3. Small and exquisite, its impact on flight can be ignored4. Precise mold opening, seamless. Ingenious integration with the fuselage, harmonious and beautiful5. Applicable models: suitable for Mini 3 Pro6. Material: plastic7. Net weight: 4g8. Gross weight: 17g

Read more less

1. The two-in-one design is both a protective cover and a hood. Two-stage shading, free viewing angle2. Effectively protect the screen, keys and joystick. Fits the shape and structure of the remote control, effectively preventing squeezing and scratching the screen and preventing accidental touch buttons.3. It can be closed with one click, avoiding repeated disassembly and assembly of the rocker.4. For DJI Mini 3 Pro5. Free storage, no need to remove the protective cover6. Precise hole opening without affecting the antenna signal and speaker hole7. Material: plastic8. Shipping list: protective cover x 1 + thumb screws x 29. Net weight: 65g10. Gross weight: 113g

Read more less