Consumer Electronics

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8202G-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1Specification: Package Weight One Package Weight 0.57kgs / 1.26lb One Package Size 26cm * 18cm * 6cm / 10.24inch * 7.09inch * 2.36inch Qty per Carton 20 Carton Weight 12.00kgs / 26.46lb Carton Size 62cm * 37cm * 53cm / 24.41inch * 14.57inch * 20.87inch Loading Container 20GP: 219 cartons * 20 pcs = 4380 pcs 40HQ: 509 cartons * 20 pcs = 10180 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 648x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Dimensions: 125.4x99.5mm 10. Display size: 119.232x88.320mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.184 x 0.184mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 5.83 inch e-Paper x 1 2. Pico-ePaper-Driver-Board x 1 3. Standoff pack x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8200EA-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 26cm * 18cm * 5cm / 10.24inch * 7.09inch * 1.97inch Qty per Carton 30 Carton Weight 12.60kgs / 27.78lb Carton Size 62cm * 37cm * 53cm / 24.41inch * 14.57inch * 20.87inch Loading Container 20GP: 219 cartons * 30 pcs = 6570 pcs 40HQ: 509 cartons * 30 pcs = 15270 pcs

Read more less

Features1. Flexible e-Paper panel, the display section is bendable (DONOT bend the FPC section) 2. No backlight, keeps displaying last content for a long time even when power down 3. Ultra low power consumption, basically power is only required for refreshing 4. SPI interface, requires minimal IO pins 5. 2x user buttons and 1x reset button for easy interacting 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 212 x 104 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Dimensions: 59.2 x 29.2mm 10. Display size: 48.55 x 23.71mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.229 x 0.228mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 2.13 inch e-Paper (D) x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs 40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8200EA-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1Specification: Package Weight One Package Weight 0.41kgs / 0.89lb One Package Size 26cm * 18cm * 5cm / 10.24inch * 7.09inch * 1.97inch Qty per Carton 30 Carton Weight 12.60kgs / 27.78lb Carton Size 62cm * 37cm * 53cm / 24.41inch * 14.57inch * 20.87inch Loading Container 20GP: 219 cartons * 30 pcs = 6570 pcs 40HQ: 509 cartons * 30 pcs = 15270 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. Onboard voltage translator, compatible with 3.3V / 5V MCUs 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V/5V 2. Display color: Black, white 3. Resolution: 480x280 pixels 4. Grey scale: 4 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: 0.3s 8. Full refresh time: 3s 9. Outline dimensions: 95.3 x 56.9mm 10. Display size: 81.12 x 47.32mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.169 x 0.169 mmPackage List1. Pico-ePaper-3.7 x 1 2. Standoff pack x 1Specification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

FeaturesThe Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring. It is an ideal choice for user to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip. 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards 2. 3.5 inch resistive touch screen, 65K colorful, bringing clear and vivid display effect 3. Standard 3.5mm audio jack, for headphone or other audio peripherals 4. Micro SD card slot through the SDIO interface, faster access speed than SPI interface 5. Integrates battery header and recharge circuit, allows it keep running without wired power supply 6. Other rich resources like buzzer, photoresistor, and RGB LED... 7. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 5V 2. Touch Type: Resistive 3. Resolution:480x320 pixels 4. Display color: 65K colorful 5. Communication BUS: SPI 6. Display panel: IPS 7. Display size: 73.44 x 48.96 mm 8. Pixel size: 0.153 x 0.153 mm 9. Controller: ILI9488/XPT2046 10. Size: 86.00 x 57.20 mmPackage List1. Pico-Eval-Board x 1 2. Standoff pack x 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 16.00kgs / 35.27lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Features: 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 2. Using UART bus, easily converting UART to RS485, or vice versa 3. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications: 1. Operating voltage: 3.3V 2. RS485 Transceiver: SP3485 3. Communication BUS: UART 4. Baudrate: 300~500000bps Package list: Pico-2CH-RS485 x1Specification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 5.00kgs / 11.02lb Carton Size 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch Loading Container 20GP: 1721 cartons * 200 pcs = 344200 pcs 40HQ: 3996 cartons * 200 pcs = 799200 pcs

Read more less

FeaturesThe Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wide range audio sampling rate, allows headphone and speaker signal output at the same time. 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 2. Standard 3.5mm audio jack, for connecting external headphone 3. Dual channels speaker headers, for direct driving speakers 4. 8~384000Hz audio sampling rate 5. Stereo sound effect output 6. Using 3-wire I2S, effectively reducing EMI 7. Come with development resources and manual (Raspberry Pi Pico audio play code, sound card code)Specification1. Operating voltage: 5V 2. Logic level: 3.3V 3. Audio decoder: PCM5101A 4. Audio BUS: I2S 5. DAC SNR: 106 dB 6. Speaker driving: 2.6W/channel (4ohms BTL)Package List1. Pico-Audio x1 2. 8ohms 5W speaker x1Specification: Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 17.50kgs / 38.58lb Carton Size 47cm * 32cm * 52cm / 18.5inch * 12.6inch * 20.47inch Loading Container 20GP: 340 cartons * 100 pcs = 34000 pcs 40HQ: 791 cartons * 100 pcs = 79100 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 648x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Dimensions: 125.4x99.5mm 10. Display size: 119.232x88.320mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.184 x 0.184mmAdvantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Package List1. 5.83 inch e-Paper x 1 2. Pico-ePaper-Driver-Board x 1 3. Standoff pack x 1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. 2x user buttons and 1x reset button for easy interacting 5. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Advantages Of EINK1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. 2. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.Specification1. Operating voltage: 3.3V 2. Display color: Red, black, white 3. Resolution: 800x480 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: N/A 8. Full refresh time: 5s 9. Outline dimensions: 170.2 x 111.2mm 10. Display size: 163.2 x 97.92mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.204 x 0.204 mmPackage List1. 7.5 inch e-Paper x1 2. Pico-ePaper-Driver-Board x1 3. Standoff pack x1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

FeaturesThe Pico-UPS-B is a dedicated UPS (Uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates Li-po battery switching charger with power path management, and voltage/current monitoring chip, allows monitoring the battery operating status via I2C bus. What is more, the male pin header make it possible to "stack" other modules on top. 1. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards 2. Incorporates Li-po battery switching charger with dynamic power path management, more stable power supply 3. I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time 4. Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, more safe and stable 5. Onboard recharging indicator, power indicator, easy to check the battery status 6. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Charging voltage: 5V 2. Control bus: I2C 3. Battery support: 600mAh 3.7V lithium battery 4. Size: 60 x 21mmSpecification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs 40HQ: 1439 cartons * 200 pcs = 287800 pcs

Read more less

FeaturesThe A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 2. Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL 3. Support dial-up, telephone call, SMS 4. Support LBS base station positioning, it is able to get the approximate position info via mobile network 5. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words 6. Onboard USB interface, for testing AT Commands, network communication, and so on 7. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. 8. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32 9. SIM card slot, supports 1.8V/3V SIM card 10. 2x LED indicators, easy to monitor the operating status 11. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper 12. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)SpecificationFrequency band 1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20 2. 2G: GSM/GPRS/EDGE: 900/1800 MHz SMS and audio 1. SMS: Supported types: MT, MO, CB, Text, PDU 2. Storage: USIM card (CB could not be stored on SIM card) 3. Audio feature: Standard 3.5mm audio jack for audio input/output Others 1. Power supply: 5V 2. Operating voltage:5V / 3.3V (configured via jumper) 3. Operating temperature: -30 degree C ~ 80degree C 4. Storage temperature: -45 degree C ~ 90 degree C 5. Dimensions: 65 x 30.5mmPackage List1. A7670E Cat-1 HAT x 1 2. LTE Antenna x 1 3. USB-A to USB-C cable x 1 4. RPi screws pack x 1Specification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Product Overview1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time. 2. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.Specification1. PoE standard: 802.3af/at 2. Input voltage: 37-57 V DC, Class 4 device 3. Output voltage/current: 5V DC/4A 4. Current sense: Yes 5. Transformer design: Planar 6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling 7. Fan size: 25 x 25mm 8. Feature: Fully isolated switched-mode power supply 9. Compatible with: Raspberry Pi 3B+/4BPackage List1. Raspberry Pi PoE+ HAT x1 2. Standoffs pack x1Specification: Package Weight One Package Weight 0.08kgs / 0.17lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 200 pcs = 113200 pcs 40HQ: 1314 cartons * 200 pcs = 262800 pcs

Read more less

Device & System SupportRaspberry Pi 1. Support Raspbian, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver free 4. Support all versions of Raspberry Pi PC Support Windows 10 / 8.1 / 8 / 7, 5-points touch, driverTouch Control1. Up to 5-points touch, depending on the operating system. 2. Up to 6H hardness toughened glass panel.Package List1. 5 inch HDMI LCD (H) V4 x1 2. HDMI cable x1 3. HDMI to Micro HDMI Adapter x1 4. USB type A plug to micro B plug cable x1 5. RPi screws pack (4pcs) x1Specification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 28.50kgs / 62.83lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 100 pcs = 32000 pcs 40HQ: 744 cartons * 100 pcs = 74400 pcs

Read more less

Features1. No backlight, keeps displaying last content for a long time even when power down 2. Ultra low power consumption, basically power is only required for refreshing 3. SPI interface, requires minimal IO pins 4. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification1. Operating voltage: 3.3V 2. Display color: Black, white 3. Resolution: 296 x 152 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: 0.3s 8. Full refresh time: 2s 9. Dimensions: 74.00 x 37.50mm 10. Display size: 60.088 x 30.704mm 11. Refresh power: 42.4mW(typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.203 x 0.202mmPackage List1. Pico-ePaper-2.66 x1 2. Standoff pack x1Specification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs 40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

1. 2.9 inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. SPI / I2C interface, requires minimal IO pins 6. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.40kgs / 33.95lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs 40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

Features1. 2.9inch capacitive touch ePaper module, 296??128 resolution 2. 5-points touch support, user-defined wakeup gesture 3. No backlight, keeps displaying last content for a long time even when power down 4. Ultra low power consumption, basically power is only required for refreshing 5. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards 6. Reversed control interface, for connecting with controller boards like Arduino/STM32, etc. 7. Comes with development resources and manual (examples for Raspberry Pi)Specification1. Operating voltage: 3.3V/5V 2. Display color: Black, white 3. Resolution: 296 x 128 pixels 4. Grey scale: 2 5. Interface: 3-wire SPI, 4-wire SPI 6. Viewing angle: Greater than 170 degree 7. Partial refresh time: 0.3s 8. Full refresh time: 2s 9. Dimensions: 89.10 x 42.70mm 10. Display size:66.89 x 29.05mm 11. Refresh power: 26.4mW (typ.) 12. Standby current: Less than 0.01uA (almost none) 13. Dot pitch: 0.227 x 0.226mmSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 26cm * 26cm / 16.54inch * 10.24inch * 10.24inch Loading Container 20GP: 939 cartons * 200 pcs = 187800 pcs 40HQ: 2180 cartons * 200 pcs = 436000 pcs

Read more less

1. Adopts both 4-wire SPI and I2C interface, better compatibility, fast data rate 2. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards 3. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specification 1. Operating voltage: 3.3V / 5V, Logic voltage: 3.3V 2. Resolution: 128x32 pixels 3. Viewing angle: Greater than 160 degree 4. Communication interface: 4-wire SPI, I2C 5. Display panel: OLED 6. Display size: 55.02 x 13.10mm 7. Pixel size: 0.41 x 0.39mm 8. Driver: SSD1305 9. Size: 52.00 x 25.00mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 300 pcs = 222000 pcs 40HQ: 1717 cartons * 300 pcs = 515100 pcs

Read more less

Features: 1. SPI-compatible, easy to drive 2. Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series 3. Come with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specifications: 1. Operating voltage: 5V 2. DIGITS: 4 3. LED color: Red 4. Driver: 74HC595 5. Display part No.: FJ4401AH 6. Display size: 0.4 inch 7. Size: 52 x a??21mSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 300 pcs = 222000 pcs 40HQ: 1717 cartons * 300 pcs = 515100 pcs

Read more less

1. 160x80 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect 2. SPI interface, requires minimal IO pins 3. 1x joystick and 2x user buttons for easy interacting 4. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specification 1. Operating voltage: 2.6 ~ 5.5V 2. Resolution: 160x80 pixels 3. Display color: 65K RGB 4. Communication interface: 4-wire SPI 5. Display panel: IPS 6. Display size: 21.70 x 10.80mm 7. Pixel size: 0.1356 x 0.135mm 8. Driver: ST7735S 9. Size: 52.00 x 25.00mmSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 7.00kgs / 15.43lb Carton Size 42cm * 33cm * 26cm / 16.54inch * 12.99inch * 10.24inch Loading Container 20GP: 740 cartons * 300 pcs = 222000 pcs 40HQ: 1717 cartons * 300 pcs = 515100 pcs

Read more less

FeaturesThis is a precise centimeter level Raspberry Pi GNSS HAT based on ZED-F9P. It provides features like multi-band RTK with fast convergence times, high update rate, moving base RTK mode support, concurrent reception of 4 GNSS systems, augment positioning systems support, accurate & fast positioning with minor drifting, and outstanding ability for anti-spoofing & anti-jamming. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. 1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano 2. Multi-band RTK with fast convergence times, centimeter level accuracy, high update rate 3. Support Moving base RTK mode, enabling terminal precise navigation and centimeter level accuracy 4. Support concurrent receiving 4 GNSS constellations (GPS, BeiDou, Galileo and GLONASS), and still retains low power consumption 5. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location 6. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity 7. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing 8. Support U-Center, an easy way to config the module 9. Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 10. 4x LEDs for indicating the module operating status 11. Come with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)Specification1. ZED-F9P: Concurrent receiving, GPS 2. Frequency band: U-blox F9 platform, GPS L1C/A L2C, SBAS, QZSS, GLONASS L1OF L2OF, BeiDou B1I B2I, Galileo E1B/C E5b 3. Navigation update rate: - PVT: 20Hz - RTK: 25Hz - RAW: 25Hz 4. RTK convergence time: Less than 30s 5. Time-To-First-Fix: - Cold starts: 29s - Hot starts: 2s - Aided starts: 2s 6. Positioning accuracy: - PVT: 1.5m CEP - RTK (horizontal and vertical): 0.01m+1ppm CEP 7. Sensitivity: - Tracking and navigatingV-167 dBm - Re-acquisitionV-160 dBm - Cold starts: -148 dBm - Hot starts: -157 dBm 8. Velocity accuracy: 0.05 m/s 9. Heading accuracy 0.3 degree 10. PPS accuracy: - RMS: 30ns - 99%: 60ns - Jamming: +/-11ns 11. PPS frequency: 0.25Hz ~ 10MHz (configurable) 12. Operational limits: Acceleration (MAX): 4g 13. Altitude (MAX): 50000m 14. Velocity (MAX): 500m/s 15. Communication interface: USB, UART (4800~921600bps, 9600bps by default), I2C (MAX 400KHz), SPI (5MHz) 16. Protocol: NMEA 0183 Version 4.10, UBX, RTCM 3.3 17. Power supply: 5V 18. Overall current: Less than 120mA at 5V (continue mode) 19. Module current: 130mA at 3V (tracking status) 20. Operating temperature: -40 degree C ~ 85 degree C 21. Dimensions: 65mm x 30.5mmPackage List1. ZED-F9P GPS-RTK HAT x 1 2. Multi-band antenna x 1 3. USB-A to Micro-B cable x 1 4. Screws pack x 1 5. 2x20PIN female header x 1Specification: Package Weight One Package Weight 0.36kgs / 0.78lb One Package Size 20cm * 16cm * 5cm / 7.87inch * 6.3inch * 1.97inch Qty per Carton 80 Carton Weight 25.00kgs / 55.12lb Carton Size 52cm * 32cm * 32cm / 20.47inch * 12.6inch * 12.6inch Loading Container 20GP: 500 cartons * 80 pcs = 40000 pcs 40HQ: 1162 cartons * 80 pcs = 92960 pcs

Read more less

1. Solar cell type: Polysilicon 2. Power: 10 Wp 3. Output power tolerance: +/-3% 4. Conversion efficiency: Greater than 20% 5. Operating voltage: 17.6V 6. Operating current: 0.57A 7. Open circuit voltage: 21.6V 8. Short circuit current: 0.61A 9. Cell quantity: 36 (4x9) 10. Standard system voltage: 1000V 11. Operating temperature: -40 degree C ~ +85 degree C 12. Pressure on panel:30m/s(200kg/sq.m) (Max) 13. Cable length:90 cm 14. Frame material: Anodic oxidation aluminum alloy 15. Dimensions: 340 x 232 x 17 mm 19. Weight:0.935 kgSpecification: Package Weight One Package Weight 0.97kgs / 2.13lb One Package Size 25cm * 35cm * 4cm / 9.84inch * 13.78inch * 1.57inch Qty per Carton 20 Carton Weight 19.50kgs / 42.99lb Carton Size 52cm * 37cm * 42cm / 20.47inch * 14.57inch * 16.54inch Loading Container 20GP: 330 cartons * 20 pcs = 6600 pcs 40HQ: 766 cartons * 20 pcs = 15320 pcs

Read more less

Camera Base Board1. CM4 socket: Suitable for all variants of Compute Module 4 2. Networking: Gigabit Ethernet RJ45 3. USB: USB 2.0 x 1 4. FFC connector: - HDMI-compatible & PCIe & USB FFC connector x 1 - GPIO FFC connector x 1 5. Dual-lens camera - Pixels: 8MP - Sensor: IMX 219 - Resolution: 3280 x 2464 (per channel) - CMOS size: 1/4 inch - Aperture: F2.4 - Focal length: 2.6mm - FOV: 83/73/50 degree (diagonal/horizontal/vertical) - Distortion: Less than 1% - Baseline length: 60mm 6. Video: HDMI-compatible x 1, supports 4K 30fps output 7. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants 8. Power input: 5V/2.5A 9. Dimensions: 85.0 x 51.5mmInterface Expander1. USB: USB 2.0 x 3 2. FFC connector: - HDMI-compatible & PCIe & USB FFC connector x 1 - GPIO FFC connector x 1 3. Other connector: - M.2 M KEY x 1, for connecting NVME SSD or communication module - Raspberry Pi 40PIN GPIO header x 1 4. Video: HDMI-compatible x 1, support 4K 30fps output 5. Dimensions: 85.0 x 51.5mmPackage List1. Dual camera base x1 2. Screws pack x1 3. Interface expander x1 4. FFC 2PCS x1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 42cm / 20.47inch * 16.54inch * 16.54inch Loading Container 20GP: 290 cartons * 200 pcs = 58000 pcs 40HQ: 674 cartons * 200 pcs = 134800 pcs

Read more less

FeaturesBased on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (D) features functionalities like fingerprint enrolling, image acquisition, feature finding, template generating and storing, fingerprint matching, and so on. Without any knowledge about the complicate fingerprinting algorithm, all you need to do is just sending some UART commands, to quickly integrate it into fingerprint verification applications which require small size and high precision. 1. Easy to use by some simple commands, you do not have to know any fingerprint technology, or the module inter structure 2. Commercial fingerprinting algorithm, supports functions like fingerprint enrolling, fingerprint matching, fingerprint image acquisition, and fingerprint feature uploading, stable performance, fast identification 3. Capacitive sensitive detection, just touch the collecting window lightly for fast verification 4. Highly integrated hardware, processor and sensor in one small chip, suitable for small size applications 5. Narrow stainless steel rim, supports 360 degree omni-directional verification 6. Embedded human sensor, the processor will enter sleep automatically, and wake up when touching, lower power consumption 7. Onboard UART connector, easy to connect with hardware platforms like STM32 and Raspberry Pi1.Specifications1. Sensor: Capacitive touch sensor 2. Resolution: 508 DPI 3. Image pixels: 160 x 160 4. Image greyscale: 8 5. Sensor dimension: R15.5 mm 6. Fingerprint capacity: 150 7. Matching time: Less than 500ms (1:N, and N Less than or equal 100) 8. False acceptance rate: Less than 0.001% 9. False rejection rate: Less than 0.1% 10. Operating voltage: 2.7~3.3V 11. Operating current: Less than 50mA 12. Sleep current: Less than 16uA 13. ESD: Contact discharge 8KV / aerial discharge 15KV 14. Communication port: UART 15. Baudrate: 19200 bps 16. Operating environment temperature: -20 degree C~70 degree C; Humidity: 40%RH~85%RH (no condensation) 17. Storage environment temperature: -40 degree C~85 degree C; Humidity: Less than 85%RH (no condensation)Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 13.00kgs / 28.66lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1000 pcs = 277000 pcs 40HQ: 644 cartons * 1000 pcs = 644000 pcs

Read more less

Features1. Incorporates original chip Si3404, high-efficiency, high-safety, stable-performance 2. 10/100/1000Mbps auto-negotiation Ethernet port 3. 802.3af/at-compliant PoE (Power over Ethernet) standard 4. Isolated SMPS (Switching Mode Power Supply), effectively protecting the powered device 5. 5V DC output, suitable for powering Raspberry Pi and other small-scale network devices 6. Black dull-polish metal case, sturdy and rugged, higher protection level, better heat dissipationSpecifications1. Power Supply: Support 1/2(+); 3/6(-); 4/5(+); 7/8(-) powering 2. POE input voltage: 37V ~ 57V 3. Type-C output: 5V 2.5A (MAX) 4. Cable: Cat-5 UTP 5. Standard: IEEE 802.3 af/at PoE Ethernet 6. Data rate: 10/100/1000Mbps 7. LED indicator: PoE power input indicator 8. Size: 86 x 30 x 25mm (l x w x h) 9. Operation temperature: -40 degree C ~ 85 degree CSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 100 pcs = 56600 pcs 40HQ: 1314 cartons * 100 pcs = 131400 pcs

Read more less

Features1. Adopt PL2303GS new version device 2. Support windows XP/7/8/10/11/... 3. 3x VCCIO power mode via jumper setting: - VCCIO - 5V: 5V output - VCCIO - 3.3V: 3.3V output 4. Open the jumper: powered from target board (1.8V/2.5V/3.3V/5V) 5. 3x LED indicators: TXD, RXD, PWRPackage List1. PL2303 USB UART Board (type A) V2 x1 2. 4-pin custom connector jumper wire x1Specification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 500 pcs = 283000 pcs 40HQ: 1314 cartons * 500 pcs = 657000 pcs

Read more less

Safety Cautions1. Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they are not properly recharged or used. 2. Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery. 3. Do not mix use old batteries with new ones, avoid using batteries of different brands. 4. When buying lithium battery, should make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test. 5. Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first. 6. Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.FeaturesThe Solar Power Manager (C) is compatible with general 6V~24V solar panels. It can recharge the 18650 rechargeable Li-ion batteries through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP). The module features MPPT (MAX Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. 1. Support MPPT (MAX Power Point Tracking) function, MAX the efficiency of the solar panel 2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter 3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input 4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency 5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance 6. Embedded battery holder, supports 3x 18650 rechargeable Li-ion batteries 7. Several LED indicators, for monitoring the status of solar panel and battery 8. Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to useSpecifications1. Solar in: 6V ~ 24V (18V by default) 2. Recharging: Solar panel, power adapter, USB 3. Battery: 3 x 18650 Li-ion battery (Not included) 4. USB input: 5V (Type-C, with PD quick charge support) 5. 5V output: 5V / 3A (USB-out, Type-C) 6. Recharging cutoff voltage: 4.2V +/- 1% 7. Over discharge protection voltage: 3.0V +/- 1% 8. Solar panel recharging effeciency: ~78% 9. USB recharging effeciency: ~93% 10. Batteries boost out effeciency: ~92% 11. Case: Metal case 12. Size: 119.0 x 71.0 x 25.2mm 13. Package list: - Solar Power Manager (C) x1 - Adapter x1Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 15cm * 5cm / 7.87inch * 5.91inch * 1.97inch Qty per Carton 40 Carton Weight 9.00kgs / 19.84lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 40 pcs = 29360 pcs 40HQ: 1705 cartons * 40 pcs = 68200 pcs

Read more less

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs 40HQ: 763 cartons * 500 pcs = 381500 pcs

Read more less

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display 6. Lithium battery recharge/discharge header, suitable for mobile devices 7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 13. 26 x multi-function GPIO pins 14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 15. Accurate clock and timer on-chip 16. Temperature sensor 17. Accelerated floating-point libraries on-chip 18. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs 40HQ: 763 cartons * 500 pcs = 381500 pcs

Read more less

Compatible ModelsFor Raspberry Pi 1. Support Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie 2. Driver free for USB-C touch 3. Config file is required for I2C touch 4. Supports all versions of Raspberry Pi For Jetson Nano 1. Support Ubuntu 2. PC 3. Support Windows 11 / 10 / 8.1 / 8 / 7 4. For Jetson Nano and PC, only USB-C touch is availablePackage List1. 2.8 inch HDMI LCD (H) x 1 2. HDMI Adapter (C) x 1 3. HDMI Adapter (B) x 1 4. HDMI cable x 1 5. USB-A to USB-C cable x 1 6. Screws pack x 1Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 20cm * 12cm * 5cm / 7.87inch * 4.72inch * 1.97inch Qty per Carton 72 Carton Weight 13.00kgs / 28.66lb Carton Size 60cm * 36cm * 40cm / 23.62inch * 14.17inch * 15.75inch Loading Container 20GP: 308 cartons * 72 pcs = 22176 pcs 40HQ: 716 cartons * 72 pcs = 51552 pcs

Read more less

1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Castellated module allows soldering direct to carrier boards 6. USB 1.1 with device and host support 7. Low-power sleep and dormant modes 8. Drag-and-drop programming using mass storage over USB 9. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points) 10. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels 11. Accurate clock and timer on-chip 12. Temperature sensor 13. Accelerated floating-point libraries on-chip 14. 8 x Programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 500 Carton Weight 8.00kgs / 17.64lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 500 pcs = 164000 pcs 40HQ: 763 cartons * 500 pcs = 381500 pcs

Read more less

About The ProductThe Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)Specifications1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 40cm * 39cm / 20.47inch * 15.75inch * 15.35inch Loading Container 20GP: 328 cartons * 1000 pcs = 328000 pcs 40HQ: 763 cartons * 1000 pcs = 763000 pcs

Read more less

FeaturesRaspberry Pi 4B main features: 1. BCM2711B0 64 bit 1.5GHz quad core processor with 4GB memory 2. It supports 4K 60fps high-resolution dual screen display by dual micro HDMI interface 3. Gigabit Ethernet port, Bluetooth 5.0 BLE, 2.4G / 5G dual-band WIFI 4. Dual USB2.0 interface, also with dual USB3.0 interface, faster transmission speed Camera Module + Wide Angle Lens: The camera module is based on the original high-quality camera of Raspberry Pi, which can provide higher resolution and higher sensitivity. With a 6mm wide-angle lens, it has better performance in visual fidelity. Raspberry Pi original high-quality camera features: 1. 12 million pixels 4056 (H) x 3040 (V), support RAW12 / 10 /8, COMP8 format output 2. 7.9mm CMOS diagonal length 3. C-mount/CS-mount lens standard with integrated IR filter Wide angle lens features: 1. 6mm Focal Length, 63 degree field angle, wider field of view 2. F1.2 Aperture, for more sufficient light entering, support manual adjustment The 4.3-inch IPS screen has the advantages of true color and large viewing angle. At the same time, the DSI display has a high frame rate and does not occupy the Raspberry Pi 40pin GPIO interface. The Raspberry Pi system has good compatibility and is an ideal match for this kit. 4.3-inch capacitive touch screen features: 1. 800 x 480 pixels IPS screen, combined with tempered glass panel, supports 5-points touch, and the visual angle can up to 160??° 2. Support DSI display interface, high frame rate, good compatibility with Raspberry Pi system Aluminum Alloy Bracket Large base for holding the object being viewed, free up and sown bracketPackage List1. PI4B-4GB x 1 2. Micro SD Card 16GB x 1 3. 4.3-inch DSI LCD x 1 4. 6mm Wide Angle Lens x 1 5. Microscope Bracket Kit x 1 6. Raspberry Pi HQ Camera x 1 7. Camera holder x 1 8. 5V 4A Type C US plug power supply x 1 9. 15Pin FFC ~30cm x 1 10. Screws pack x 1 11. Card reader x 1 12. Cooling fan x 1Specification: Package Weight One Package Weight 0.80kgs / 1.76lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 16.60kgs / 36.60lb Carton Size 50cm * 30cm * 40cm / 19.69inch * 11.81inch * 15.75inch Loading Container 20GP: 444 cartons * 20 pcs = 8880 pcs 40HQ: 1031 cartons * 20 pcs = 20620 pcs

Read more less

1. Touch screen expansion board + interface expander: The touch screen expansion board and an additional interface expander, with Gigabit Ethernet port, M.2 slot for connecting communication module or SSD, and more USB ports. 2. 2.8 inch display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, more safe to use 3. Touch Screen Expansion Board Introduction: - CM4 socket: Suitable for all variants of Compute Module 4 - USB: USB 2.0 x 1 - Connector: MIPI CSI 22PIN 0.5mm camera connector - Display: 2.8 inch fully laminated screen, 480 x 640 pixels, 5-point capacitive touch, toughened glass panel - Video: Micro HDMI x 1, supports 4K 30fps output - Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants - Power input: 5V 4. Interface Expander Introduction - Networking: Gigabit Ethernet RJ45; M.2 M KEY, support NVME SSD or communication module - USB: USB 2.0 x 3 Package list: 1. Touch screen expansion board x1 2. Screws pack x1 3. Interface expander x1Specification: Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 15.00kgs / 33.07lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs 40HQ: 1439 cartons * 200 pcs = 287800 pcs

Read more less

1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(B): AF Auto-Focus; 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs 40HQ: 1343 cartons * 200 pcs = 268600 pcs

Read more less

1. Pixels: 5MP 2. Sensor: OV5640 3. Interface: USB 2.0 4. Camera: Sensor size 1/4 inch 5. Aperture (F): 2.8 6. Focal length (EFL): 3.29 mm 7. Field of view (FOV): 68 degree 8. Distortion: Less than 1% 9. Focusing(C): FF Fixed-Focus 10. Image Format support: MJPG, YUV422 11. Static image resolution: 2592 x 1944 12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 13. Operating voltage: 5V +/- 5% 14. Camera size: 8.5 x 8.5 mm 15. Module size: 9 x 62 mmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 8.00kgs / 17.64lb Carton Size 45cm * 32cm * 32cm / 17.72inch * 12.6inch * 12.6inch Loading Container 20GP: 578 cartons * 200 pcs = 115600 pcs 40HQ: 1343 cartons * 200 pcs = 268600 pcs

Read more less

1. GPU: 128-core Maxwell 2. CPU: Quad-core ARM A57 1.43 GHz 3. Memory: 4GB 64-bit LPDDR4 25.6 GB/s 4. Storage: 16GB eMMC (no micro SD card slot) 5. Video encoder: 4K 30, 4x 1080p 30, 9x 720p 30 (H.264/H.265) 6. Video decoder: 4K 60, 2x 4K 30, 8x 1080p 30, 18x 720p 30 (H.264/H.265) 7. Camera: 2x MIPI CSI-2 DPHY lanes 8. Connectivity: Gigabit Ethernet, M.2 Key E expansion connector 9. Display: HDMI and DP 10. USB: 4x USB 3.0, USB 2.0 Micro-B 11. Extension interfaces: GPIO, I2C, I2S, SPI, UART 12. Dimensions: 100 x 80 x 29mm 13. Other: 260-pin connectorSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 200 Carton Weight 18.00kgs / 39.68lb Carton Size 52cm * 35cm * 35cm / 20.47inch * 13.78inch * 13.78inch Loading Container 20GP: 418 cartons * 200 pcs = 83600 pcs 40HQ: 971 cartons * 200 pcs = 194200 pcs

Read more less

1. Sensor: IMX378 2. CMOS size:1/2.3 inch 3. Camera type: Color Pixels: 12.3MP (4056 x 3040) 4. Shutter: Rolling Shutter 5. Aperture: F2.4 6. Distortion: Less than 58% 7. Field of vies: 190 degree 8. Focal length: 6.5mm 8. Focusing: Fixed focus distanceSpecification: Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 12.30kgs / 27.12lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs 40HQ: 1439 cartons * 300 pcs = 431700 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller. 3. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 4. Embedded ferrite Hi-Fi speaker. 5. Embedded microphone and speaker, adopts snowboy hotword detection engine. 6. 75x75mm spacing mounting holes (M4 screw hole). 7. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch PiPad x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 1.17kgs / 2.58lb One Package Size 36cm * 26cm * 6cm / 14.17inch * 10.24inch * 2.36inch Qty per Carton 10 Carton Weight 13.00kgs / 28.66lb Carton Size 53cm * 32cm * 37cm / 20.87inch * 12.6inch * 14.57inch Loading Container 20GP: 424 cartons * 10 pcs = 4240 pcs 40HQ: 986 cartons * 10 pcs = 9860 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller 3. One-way mirror, can display news, weather and time. 4. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 5. Embedded ferrite Hi-Fi speaker. 6. Embedded Microphone And Speaker, Adopts Snowboy Hotword Detection Engine. 7. 75 x 75mm spacing mounting holes (M4 screw hole) for a general wall mount. 8. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch Magic Mirror x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 1.76kgs / 3.88lb One Package Size 45cm * 27cm * 9cm / 17.72inch * 10.63inch * 3.54inch Qty per Carton 10 Carton Weight 18.50kgs / 40.79lb Carton Size 47cm * 55cm * 45cm / 18.5inch * 21.65inch * 17.72inch Loading Container 20GP: 229 cartons * 10 pcs = 2290 pcs 40HQ: 532 cartons * 10 pcs = 5320 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller 3. One-way mirror, can display news, weather and time. 4. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 5. Embedded ferrite Hi-Fi speaker. 6. Embedded Microphone And Speaker, Adopts Snowboy Hotword Detection Engine. 7. 75 x 75mm spacing mounting holes (M4 screw hole) for a general wall mount. 8. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch Magic Mirror x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 1.76kgs / 3.88lb One Package Size 45cm * 27cm * 9cm / 17.72inch * 10.63inch * 3.54inch Qty per Carton 10 Carton Weight 18.50kgs / 40.79lb Carton Size 47cm * 55cm * 45cm / 18.5inch * 21.65inch * 17.72inch Loading Container 20GP: 229 cartons * 10 pcs = 2290 pcs 40HQ: 532 cartons * 10 pcs = 5320 pcs

Read more less

Features1. 13.3 inch IPS screen,1920 x 1080 high resolution. 2. Embed Raspberry Pi 3A+ as controller. 3. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch. 4. Embedded ferrite Hi-Fi speaker. 5. Embedded microphone and speaker, adopts snowboy hotword detection engine. 6. 75x75mm spacing mounting holes (M4 screw hole). 7. Comes with a 75 degree tilt angle stand.Package List1. 13.3 inch PiPad x 1 2. 12V power adapter x 1 3. Card reader x 1 4. Micro SD card x 1Specification: Package Weight One Package Weight 1.17kgs / 2.58lb One Package Size 36cm * 26cm * 6cm / 14.17inch * 10.24inch * 2.36inch Qty per Carton 10 Carton Weight 13.00kgs / 28.66lb Carton Size 53cm * 32cm * 37cm / 20.87inch * 12.6inch * 14.57inch Loading Container 20GP: 424 cartons * 10 pcs = 4240 pcs 40HQ: 986 cartons * 10 pcs = 9860 pcs

Read more less

1. Suitable for evaluating the Raspberry Pi CM4 Or being integrated into end products 2. Standard CM4 socket, 40PIN GPIO, gigabit ethernet, USB2.0, DSI, CSI, 3.5mm Audio Jack... 3. All in the compact body just as the size of CM4 Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Networking: Gigabit Ethernet RJ45 connector 3. Connector: Raspberry Pi 40PIN GPIO header x 1 4. USB: USB 2.0 Type A connector x 1 5. Display: MIPI DSI port x 1 (15pin 1.0mm FPC connector) 6. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 7. Video: Mini HDMI port x 1, supports 4K 30fps output 8. Audio: 3.5mm jack 9. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 10. Power input: 5V 11. Dimension: 56 x 41mm Package list: 1. CM4-NANO-B x 1 3. 2*20PIN color-coded straight pinheader x 1Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 300 Carton Weight 8.00kgs / 17.64lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 300 pcs = 186000 pcs 40HQ: 1439 cartons * 300 pcs = 431700 pcs

Read more less

Features1. 5inch IPS capacitive touch screen, 800 x 480 resolution 2. Compatible with Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4 (CM3/3+/4 requires extra adapter board) 3. The LCD is directly driven by Raspberry Pi DPI interface 4. Backlight can be turned off to lower power consumption 5. Toughened glass capacitive touch panel, 5-points touch 6. Compact size, suit for various projectsDevice & System Support1. Support Raspberry Pi OS, 5-points touch, driver free 2. Support Ubuntu / Kali / WIN10 IoT, single point touch, driver free 3. Support Retropie, driver freePackage List1. 5 inch DSI LCD (B) x 1 2. FPC 15PIN 1.0 pitch 50mm (opposite sides) x 1 3. Screws pack x 1Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 17.50kgs / 38.58lb Carton Size 52cm * 50cm * 32cm / 20.47inch * 19.69inch * 12.6inch Loading Container 20GP: 320 cartons * 100 pcs = 32000 pcs 40HQ: 744 cartons * 100 pcs = 74400 pcs

Read more less

1. 1MP, global shutter, 120 degree FOV, OV9281-120 mono camera, compatible with Raspberry Pi series boards 2. The global shutter eliminates jello-effect while shooting fast moving objects, more suitable for high frame rate capturing 3. Working with Raspberry Pi, direct connect to Raspberry Pi different variants including 4B / 3B+ / 3A+ / 3B / 2B / B+ / A+, extra FPC cable is equired for Zero / Zero 2 W series Specifications: 1. Sensor: OV9281 2. CMOS size: 1/4 inch 3. Camera type: Mono 4. Pixels: 1MP (1280 x 800) 5. Shutter: Global Shutter 6. Aperture: F2.5 7. Distortion: Less than 7.5% 8. Field of vies: 120 degree 9. Focal length: 3.15mm 10. Focusing: Fixed focus Package List: 1. OV9281-120 Camera x 1 2. 15-pin FFC (opposite sides contact) x 1Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch Qty per Carton 200 Carton Weight 14.00kgs / 30.86lb Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch Loading Container 20GP: 620 cartons * 200 pcs = 124000 pcs 40HQ: 1439 cartons * 200 pcs = 287800 pcs

Read more less

FeaturesBased on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (E) features functionalities like fingerprint enrolling, image acquisition, feature finding, fingerprint matching, and so on. Without any knowledge about the complicate fingerprinting algorithm, all you need to do is just sending some UART commands, to quickly integrate it into fingerprint verification applications which require small size and high precision. 1. Easy to use by some simple commands, you do not have to know any fingerprint technology, or the module inter structure 2. Commercial fingerprinting algorithm, supports functions like fingerprint enrolling, fingerprint matching, fingerprint image acquisition, and fingerprint feature uploading, stable performance, fast identification 3. Capacitive sensitive detection, just touch the collecting window lightly for fast verification 4. Highly integrated hardware, processor and sensor in one small chip, suitable for small size applications 5. Embedded human sensor, the processor will enter sleep automatically, and wake up when touching, lower power consumption 6. Onboard UART connector, easy to connect with hardware platforms like STM32 and Raspberry PiSpecifications1. Sensor: Capacitive touch sensor 2. Resolution: 508 DPI 3. Image pixels: 160 x 160 4. Image greyscale: 8 5. Sensor dimension: 11.2 x 12.2 mm 6. Fingerprint capacity: 3000 7. Matching time: Less than 200ms (1:N, and N less than or equal to 100) 8. False acceptance rate: Less than 0.001% 9. False rejection rate: Less than 0.1% 10. Operating voltage: 3.3V 11. Operating current: Less than 50mA 12. Sleep current: Less than 16uA 13. ESD: Contact discharge 8KV / aerial discharge 15KV 14. Communication port: UART 15. Baudrate: 19200 bps 16. Operating environment: Temperature: -20 degree C~70 degree C; 17. Humidity: 40%RH~85%RH (no condensation) 18. Storage environment: Temperature: -40 degree C~85 degree C; Humidity: Less than 85%RH (no condensation)Package List1. UART Fingerprint Sensor (E) x 1 2. 6PIN squid wire x 1Specification: Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 15cm * 12cm * 14cm / 5.91inch * 4.72inch * 5.51inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 60cm * 40cm * 40cm / 23.62inch * 15.75inch * 15.75inch Loading Container 20GP: 277 cartons * 1000 pcs = 277000 pcs 40HQ: 644 cartons * 1000 pcs = 644000 pcs

Read more less