Consumer Electronics

Features:1. Support setting device address (1-255) to cascade multiple devices through RS485 bus2. With flash-on and flash-off functions, the relay can be controlled by command to automatically close after being turned on for a period of time3. Onboard voltage regulator chip, direct plug-in 7V-36V wide voltage power supply4. Onboard integrated power isolation, which can provide stable isolation voltage, and no additional power supply is required for the isolation end5. Onboard integrated ADI magnetic coupling isolation, which can be used for signal isolation, high reliability, strong anti-interference, low power consumption6. Onboard resettable fuse and TVS (transient voltage suppressor) can effectively suppress surge voltage and transient spike voltage in the circuit, prevent overcurrent and overvoltage, lightning protection and anti-static7. Onboard optocoupler isolation to avoid interference from relay high-voltage circuit8. Adopting dedicated relay driver chip with built-in freewheeling diode protection, the driving capability is stronger and more stable9. Onboard anti-reverse connection circuit to avoid reverse connection of positive and negative poles and burnout of circuit10. Adopting high-quality high-current relay, load connection is allowed: less than or equal to 30A 250V AC or less than or equal to 30A 28V DC11. Guide rail ABS protective shell, easy to install and use, safer with shell12. External 3 LED indicators, convenient to check MCU status and signal receiving and sending statusProduct parameters:1. Working voltage: 7V-36V2. Communication protocol: RS4853. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default communication format: 9600, N, 8, 15. Number of relays: 86. Contact type: one normally open, one normally closed7. Contact load: less than or equal to 30A 250V AC or equal to 30A 28V DC8. Communication protocol: standard Modbus RTU protocol9. RS485 address setting: 1-25510. Indicator light:STA: MCU indicator light, flashes when MCU is working normallyTXD: Send indicator light, lights up when sending dataRXD: Receive indicator light, lights up when receiving data11. Product size: 200 x 110.9 x 59.1mm12. This product is manually measured, and there may be an error of 0.1-0.2 mm and 0.1-0.2 g in length and weight; there may be a slight color difference due to display and light problems. Please refer to the actual product!Specification: Package Weight One Package Weight 0.57kgs / 1.27lb One Package Size 24cm * 13cm * 8cm / 9.45inch * 5.12inch * 3.15inch Qty per Carton 16 Carton Weight 10.30kgs / 22.71lb Carton Size 50cm * 28cm * 34cm / 19.69inch * 11.02inch * 13.39inch Loading Container 20GP: 560 cartons * 16 pcs = 8960 pcs 40HQ: 1300 cartons * 16 pcs = 20800 pcs

Read more less

1. Waterproof Stainless Steel DS18B20 Temperature Probe – A high-precision digital temperature sensor designed for durability and ease of integration.2. Premium stainless steel housing (6x50mm) ensures waterproof, moisture-proof, and rust-resistant performance.3. 100cm flexible lead for versatile installation in wet or harsh environments.4. Utilizes a 1-Wire interface; no external components required for data transmission.5. Ideal for HVAC systems, aquariums, outdoor weather stations, and IoT projects.6. Supply voltage: 3.0V~5.5V7. Resolution: 9~12 bits adjustable8. Temperature sensing range: -20 to 80 degrees Celsius9. Output leads: red (VCC), yellow (DATA), black (GND)Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 16cm * 14cm * 5cm / 6.3inch * 5.51inch * 1.97inch Qty per Carton 36 Carton Weight 3.60kgs / 7.94lb Carton Size 50cm * 30cm * 32cm / 19.69inch * 11.81inch * 12.6inch Loading Container 20GP: 555 cartons * 36 pcs = 19980 pcs 40HQ: 1289 cartons * 36 pcs = 46404 pcs

Read more less

1. Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of main controllers such as STM32, MSPM0, ESP32, Raspberry Pi, etc. through serial communication. Equipped with a powerful neural network acceleration engine, it supports AI vision tasks such as real-time image recognition, target detection, face recognition, and behavior analysis. It can be widely used in smart homes, maker education, programming robots, electronic design competitions and other occasions.2. On board 2MP camera(GC2093), 2.4-inch touch screen, microphone, RGB light, WiFi network card and other hardware resources, support TF card (32G TF card inchude).3. Adopting Kendryte K230 chip, 1GB RAN, equivalent computing power can reach 6TOPS.4. Pre-installed GUI program, integrated with 30+ functions (human posture recognition, object recognition, image detection, road sign recognition, label code recognition light), users can quickly experience.5. Provide version host computer software on Windows, support RTSP real-time video stream monitoring, and integrate video/image processing tools, data generator, text tools and other content.6. Three different height brackets and 2DOF electric PTZ are available, users can fix the module on some robots or smart cars.Parameter:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps --JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Display: 2.4-inch LCD capacitive touch screen, resolution 640 x 4809. Onboard functions: microphone, buzzer, RGB light, WiFi network card10. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot11. Power supply mode: Type-C/communication interface 5V input/GPIO 5V input12. Working current: 0.8A13. Working power: 4W14. Buttons: Reset button + custom function button15. Dimensions: 72 x 46 x 18.7mmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 24cm * 20cm * 10cm / 9.45inch * 7.87inch * 3.94inch Qty per Carton 16 Carton Weight 4.30kgs / 9.48lb Carton Size 50cm * 42cm * 34cm / 19.69inch * 16.54inch * 13.39inch Loading Container 20GP: 373 cartons * 16 pcs = 5968 pcs 40HQ: 867 cartons * 16 pcs = 13872 pcs

Read more less

1. Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of main controllers such as STM32, MSPM0, ESP32, Raspberry Pi, etc. through serial communication. Equipped with a powerful neural network acceleration engine, it supports AI vision tasks such as real-time image recognition, target detection, face recognition, and behavior analysis. It can be widely used in smart homes, maker education, programming robots, electronic design competitions and other occasions.2. On board 2MP camera(GC2093), 2.4-inch touch screen, microphone, RGB light, WiFi network card and other hardware resources, support TF card (32G TF card inchude).3. Adopting Kendryte K230 chip, 1GB RAN, equivalent computing power can reach 6TOPS.4. Pre-installed GUI program, integrated with 30+ functions (human posture recognition, object recognition, image detection, road sign recognition, label code recognition light), users can quickly experience.5. Provide version host computer software on Windows, support RTSP real-time video stream monitoring, and integrate video/image processing tools, data generator, text tools and other content.6. Three different height brackets and 2DOF electric PTZ are available, users can fix the module on some robots or smart cars.Parameter:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps --JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Display: 2.4-inch LCD capacitive touch screen, resolution 640 x 4809. Onboard functions: microphone, buzzer, RGB light, WiFi network card10. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot11. Power supply mode: Type-C/communication interface 5V input/GPIO 5V input12. Working current: 0.8A13. Working power: 4W14. Buttons: Reset button + custom function button15. Dimensions: 72 x 46 x 18.7mmSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 14cm * 12cm * 8cm / 5.51inch * 4.72inch * 3.15inch Qty per Carton 36 Carton Weight 7.40kgs / 16.31lb Carton Size 44cm * 38cm * 34cm / 17.32inch * 14.96inch * 13.39inch Loading Container 20GP: 469 cartons * 36 pcs = 16884 pcs 40HQ: 1088 cartons * 36 pcs = 39168 pcs

Read more less

1. Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of main controllers such as STM32, MSPM0, ESP32, Raspberry Pi, etc. through serial communication. Equipped with a powerful neural network acceleration engine, it supports AI vision tasks such as real-time image recognition, target detection, face recognition, and behavior analysis. It can be widely used in smart homes, maker education, programming robots, electronic design competitions and other occasions.2. On board 2MP camera(GC2093), 2.4-inch touch screen, microphone, RGB light, WiFi network card and other hardware resources, support TF card (32G TF card inchude).3. Adopting Kendryte K230 chip, 1GB RAN, equivalent computing power can reach 6TOPS.4. Pre-installed GUI program, integrated with 30+ functions (human posture recognition, object recognition, image detection, road sign recognition, label code recognition light), users can quickly experience.5. Provide version host computer software on Windows, support RTSP real-time video stream monitoring, and integrate video/image processing tools, data generator, text tools and other content.6. Three different height brackets and 2DOF electric PTZ are available, users can fix the module on some robots or smart cars.Parameter:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps --JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Display: 2.4-inch LCD capacitive touch screen, resolution 640 x 4809. Onboard functions: microphone, buzzer, RGB light, WiFi network card10. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot11. Power supply mode: Type-C/communication interface 5V input/GPIO 5V input12. Working current: 0.8A13. Working power: 4W14. Buttons: Reset button + custom function button15. Dimensions: 72 x 46 x 18.7mmSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 14cm * 10cm / 7.87inch * 5.51inch * 3.94inch Qty per Carton 12 Carton Weight 4.00kgs / 8.82lb Carton Size 42cm * 30cm * 32cm / 16.54inch * 11.81inch * 12.6inch Loading Container 20GP: 661 cartons * 12 pcs = 7932 pcs 40HQ: 1535 cartons * 12 pcs = 18420 pcs

Read more less

1. Yahboom intelligent voice interaction module that integrates voice recognition and voice broadcast. It adopts the CI1302 voice chip solution, built-in high-performance neural network processor, supports deep learning noise reduction and echo cancellation, and brings a smooth voice interaction experience. On board microphones and speakers, supports Chinese and English entries, and recognition rate of up to 99%. It can also customize the wake-up words, command words, playback timbre and volume, and recognition sensitivity and other parameters, making AI voice development simpler and smarter.2. Preset 110+ voice commands, support custom Chinese and English command words. Users can modify the command words through the exclusive web page we provide, generate a new firmware file, and write the firmware to the module through PC software, the module will recognize new commands. Built-in storage space 2M, up to about 120 command words can be written.3. Embedded high-fidelity speakers and high-performance microphones. Integrated with advanced algorithms and circuit noise reduction, it can effectively filter the background noise in the environment, and the recognition rate can reach 99% within a range of 5M, thereby achieving natural conversation and echo cancellation. It can provide clear sound quality output and accurately restore voice details.4. On board coprocessor and IIC/serial port/Type-C interface. Integrates the STC8H chip, which can automatically convert voice data into serial port or IIC data format, simplifying the communication process with external master devices. Yahbom provides different connecting cables for free, and users can connect it with the MCU development board and embedded master control to achieve communication and create their own DIY projects.5. Provide usage tutorials based on a variety of development boards. Provide development board information such as STM32, ESP32, MSPM0, AR, Raspberry Pi, jetson series boards, RDK, etc. And provide SDK files for ROS1 and ROS2 systems.Parameters:1. Voice chip model: CI13022. Power supply voltage: DC 5V3. Product size: 48.1x24.1x14.3mm4. Product weight: 10g5. FLASH capacity: 2 MByte6. RAM capacity: 640 KByte7. Installation method: Use M2.5/M3 screws and copper pillars to fix through the slots8. Recognition mode: Command wake-up9. Communication method: IIC communication, serial communication10. Recognition range: The maximum recognition distance in quiet is 5m; the recognition distance in a noisy environment is 1m 11. Recognition requirements: Recognition is based on fixed terms, and up to 255 phrases or short sentences can be recognized. The recognition language can be modified through firmware.12. Indicator light: Red LED power indicator light, green LED status indicator lightSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 20cm * 12cm * 8cm / 7.87inch * 4.72inch * 3.15inch Qty per Carton 24 Carton Weight 7.10kgs / 15.65lb Carton Size 42cm * 38cm * 34cm / 16.54inch * 14.96inch * 13.39inch Loading Container 20GP: 491 cartons * 24 pcs = 11784 pcs 40HQ: 1140 cartons * 24 pcs = 27360 pcs

Read more less

1. Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of main controllers such as STM32, MSPM0, ESP32, Raspberry Pi, etc. through serial communication. Equipped with a powerful neural network acceleration engine, it supports AI vision tasks such as real-time image recognition, target detection, face recognition, and behavior analysis. It can be widely used in smart homes, maker education, programming robots, electronic design competitions and other occasions.2. On board 2MP camera(GC2093), 2.4-inch touch screen, microphone, RGB light, WiFi network card and other hardware resources, support TF card (32G TF card inchude).3. Adopting Kendryte K230 chip, 1GB RAN, equivalent computing power can reach 6TOPS.4. Pre-installed GUI program, integrated with 30+ functions (human posture recognition, object recognition, image detection, road sign recognition, label code recognition light), users can quickly experience.5. Provide version host computer software on Windows, support RTSP real-time video stream monitoring, and integrate video/image processing tools, data generator, text tools and other content.6. Three different height brackets and 2DOF electric PTZ are available, users can fix the module on some robots or smart cars.Parameter:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps --JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Display: 2.4-inch LCD capacitive touch screen, resolution 640 x 4809. Onboard functions: microphone, buzzer, RGB light, WiFi network card10. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot11. Power supply mode: Type-C/communication interface 5V input/GPIO 5V input12. Working current: 0.8A13. Working power: 4W14. Buttons: Reset button + custom function button15. Dimensions: 72 x 46 x 18.7mmSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 35cm * 30cm * 20cm / 13.78inch * 11.81inch * 7.87inch Qty per Carton 2 Carton Weight 3.50kgs / 7.72lb Carton Size 37cm * 32cm * 42cm / 14.57inch * 12.6inch * 16.54inch Loading Container 20GP: 536 cartons * 2 pcs = 1072 pcs 40HQ: 1244 cartons * 2 pcs = 2488 pcs

Read more less

1. Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6TOPS equivalent computing power and 1GB RAM. It can be connected to a variety of main controllers such as STM32, MSPM0, ESP32, Raspberry Pi, etc. through serial communication. Equipped with a powerful neural network acceleration engine, it supports AI vision tasks such as real-time image recognition, target detection, face recognition, and behavior analysis. It can be widely used in smart homes, maker education, programming robots, electronic design competitions and other occasions.2. On board 2MP camera(GC2093), 2.4-inch touch screen, microphone, RGB light, WiFi network card and other hardware resources, support TF card (32G TF card inchude).3. Adopting Kendryte K230 chip, 1GB RAN, equivalent computing power can reach 6TOPS.4. Pre-installed GUI program, integrated with 30+ functions (human posture recognition, object recognition, image detection, road sign recognition, label code recognition light), users can quickly experience.5. Provide version host computer software on Windows, support RTSP real-time video stream monitoring, and integrate video/image processing tools, data generator, text tools and other content.6. Three different height brackets and 2DOF electric PTZ are available, users can fix the module on some robots or smart cars.Parameter:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps --JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Display: 2.4-inch LCD capacitive touch screen, resolution 640 x 4809. Onboard functions: microphone, buzzer, RGB light, WiFi network card10. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot11. Power supply mode: Type-C/communication interface 5V input/GPIO 5V input12. Working current: 0.8A13. Working power: 4W14. Buttons: Reset button + custom function button15. Dimensions: 72 x 46 x 18.7mmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 24cm * 20cm * 10cm / 9.45inch * 7.87inch * 3.94inch Qty per Carton 16 Carton Weight 4.30kgs / 9.48lb Carton Size 50cm * 42cm * 34cm / 19.69inch * 16.54inch * 13.39inch Loading Container 20GP: 373 cartons * 16 pcs = 5968 pcs 40HQ: 867 cartons * 16 pcs = 13872 pcs

Read more less

1. The K230 visual recognition module is equipped with a 1080P/60FPS high-definition camera, is compact and exquisite, and can be easily integrated into various AI visual application scenarios. It is an ideal choice for electronic competitions.2. The K230 is programmed and developed using MicroPython language. Users can easily handle multiple visual applications such as color recognition, object counting, QR code recognition, face recognition, character recognition, and self-training without mastering AI model algorithms, greatly lowering the threshold for AI learning.3. The module integrates a WiFi chip and supports IoT connections. It can be connected to a cloud platform to access large language models, enabling intelligent dialogue and voice question-answering functions.4. Windows-based upper computer software is provided, supporting RTSP real-time video stream monitoring, and integrating video/image processing tools, data generators, text tools, and other contents.5. Audio processing support: The K230 integrates a microphone and supports audio recording, enabling keyword wake-up and voice-to-text functions. Combined with large language models, it can conduct language dialogues and provide an intelligent interactive experience.6. Expandable speaker: It supports external speakers and, in combination with large language models, can achieve voice dialogue. It can also be linked with AI image processing functions to broadcast visual recognition results in real time.7. Supports multiple development platforms: It can be connected to PC computers, MSPMO, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK, and other mainstream controllers for development.8. CanMV development environment: The K230 visual recognition module uses CanMV IDE as the development environment. It is simple and convenient to operate, with the IDE providing function input parameter and related content prompts. The code does not require compilation and can be modified and debugged online. The code can be directly downloaded to the K230 module for operation.9. Additionally, we provide over 100 development resource tutorials and program source codes to facilitate users secondary development and learning, helping you realize various rich AI creative projects.Parameters:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps--JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Onboard functions: microphone, buzzer, RGB light, WiFi network card9. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot10. Power supply: Type-C/communication interface 5V input/GPIO 5V input11. Working current: 0.6A12. Working power: 3W13. Buttons: reset button + custom function button14. Size: 75 x 47 x 19.7mmSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 20cm * 14cm * 10cm / 7.87inch * 5.51inch * 3.94inch Qty per Carton 12 Carton Weight 4.00kgs / 8.82lb Carton Size 42cm * 30cm * 32cm / 16.54inch * 11.81inch * 12.6inch Loading Container 20GP: 661 cartons * 12 pcs = 7932 pcs 40HQ: 1535 cartons * 12 pcs = 18420 pcs

Read more less

1. The K230 visual recognition module is equipped with a 1080P/60FPS high-definition camera, is compact and exquisite, and can be easily integrated into various AI visual application scenarios. It is an ideal choice for electronic competitions.2. The K230 is programmed and developed using MicroPython language. Users can easily handle multiple visual applications such as color recognition, object counting, QR code recognition, face recognition, character recognition, and self-training without mastering AI model algorithms, greatly lowering the threshold for AI learning.3. The module integrates a WiFi chip and supports IoT connections. It can be connected to a cloud platform to access large language models, enabling intelligent dialogue and voice question-answering functions.4. Windows-based upper computer software is provided, supporting RTSP real-time video stream monitoring, and integrating video/image processing tools, data generators, text tools, and other contents.5. Audio processing support: The K230 integrates a microphone and supports audio recording, enabling keyword wake-up and voice-to-text functions. Combined with large language models, it can conduct language dialogues and provide an intelligent interactive experience.6. Expandable speaker: It supports external speakers and, in combination with large language models, can achieve voice dialogue. It can also be linked with AI image processing functions to broadcast visual recognition results in real time.7. Supports multiple development platforms: It can be connected to PC computers, MSPMO, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK, and other mainstream controllers for development.8. CanMV development environment: The K230 visual recognition module uses CanMV IDE as the development environment. It is simple and convenient to operate, with the IDE providing function input parameter and related content prompts. The code does not require compilation and can be modified and debugged online. The code can be directly downloaded to the K230 module for operation.9. Additionally, we provide over 100 development resource tutorials and program source codes to facilitate users secondary development and learning, helping you realize various rich AI creative projects.Parameters:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps--JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Onboard functions: microphone, buzzer, RGB light, WiFi network card9. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot10. Power supply: Type-C/communication interface 5V input/GPIO 5V input11. Working current: 0.6A12. Working power: 3W13. Buttons: reset button + custom function button14. Size: 75 x 47 x 19.7mmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 24cm * 20cm * 10cm / 9.45inch * 7.87inch * 3.94inch Qty per Carton 16 Carton Weight 4.30kgs / 9.48lb Carton Size 50cm * 42cm * 34cm / 19.69inch * 16.54inch * 13.39inch Loading Container 20GP: 373 cartons * 16 pcs = 5968 pcs 40HQ: 867 cartons * 16 pcs = 13872 pcs

Read more less

1. This PCIe to M.2 expansion board specially designed for Raspberry Pi 5 is designed to bring more possibilities to your Raspberry Pi projects. With this expansion board, you can easily connect a high-speed M.2 NVMe solid-state drive to the Raspberry Pi 5, greatly increasing data transfer speed and storage capacity. It supports M.2 solid-state drives of various sizes (such as 2230, 2242, 2260 and 2280), and the installation process is simple and intuitive, so you can get started quickly without complicated settings. It not only expands the storage space of Raspberry Pi 5, but also provides better support for your computing tasks, making your Raspberry Pi 5 capable of more complex application scenarios.2. Compatible with four sizes of solid state drives (2230/2242/2260/2280). 3. The stack is installed on the back of the Raspberry Pi without affecting heat dissipation and case installation. 4. Can improve data transmission speed, suitable for projects with high-speed storage requirements. 5. Using high-quality materials and precision manufacturing processes to ensure stable operation and long-term durability.Parameters:1. M.2 M-Key: NVMe protocol, supports M.2 SSD hard disk (2230/2242/2260/2280)2. SSD function: supports an SSD hard disk to boot the system, and storage expansion or only storage expansion3. LED indicator: power indicator, ACT hard disk status indicator4. M.2 device power supply current: 3A5. PCle 2.0 interface rate: theoretical peak transfer rate 500MB/s6. Compatible with PCIe standards: Gen2 and Gen37. FPC line parameters: 0.5mm pitch FPC line8. Screw copper column: M2.5 x 10 dual-channel 4; M2.5 x 5+6 single-channel 49. Size: 88 mm x 56 mm x 1.7 mm10. Weight: 5.2gSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 54 pcs = 31914 pcs 40HQ: 1373 cartons * 54 pcs = 74142 pcs

Read more less

1. The K230 visual recognition module is equipped with a 1080P/60FPS high-definition camera, is compact and exquisite, and can be easily integrated into various AI visual application scenarios. It is an ideal choice for electronic competitions.2. The K230 is programmed and developed using MicroPython language. Users can easily handle multiple visual applications such as color recognition, object counting, QR code recognition, face recognition, character recognition, and self-training without mastering AI model algorithms, greatly lowering the threshold for AI learning.3. The module integrates a WiFi chip and supports IoT connections. It can be connected to a cloud platform to access large language models, enabling intelligent dialogue and voice question-answering functions.4. Windows-based upper computer software is provided, supporting RTSP real-time video stream monitoring, and integrating video/image processing tools, data generators, text tools, and other contents.5. Audio processing support: The K230 integrates a microphone and supports audio recording, enabling keyword wake-up and voice-to-text functions. Combined with large language models, it can conduct language dialogues and provide an intelligent interactive experience.6. Expandable speaker: It supports external speakers and, in combination with large language models, can achieve voice dialogue. It can also be linked with AI image processing functions to broadcast visual recognition results in real time.7. Supports multiple development platforms: It can be connected to PC computers, MSPMO, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK, and other mainstream controllers for development.8. CanMV development environment: The K230 visual recognition module uses CanMV IDE as the development environment. It is simple and convenient to operate, with the IDE providing function input parameter and related content prompts. The code does not require compilation and can be modified and debugged online. The code can be directly downloaded to the K230 module for operation.9. Additionally, we provide over 100 development resource tutorials and program source codes to facilitate users secondary development and learning, helping you realize various rich AI creative projects.Parameters:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps--JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Onboard functions: microphone, buzzer, RGB light, WiFi network card9. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot10. Power supply: Type-C/communication interface 5V input/GPIO 5V input11. Working current: 0.6A12. Working power: 3W13. Buttons: reset button + custom function button14. Size: 75 x 47 x 19.7mmSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 35cm * 30cm * 20cm / 13.78inch * 11.81inch * 7.87inch Qty per Carton 2 Carton Weight 3.50kgs / 7.72lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 2 pcs = 1072 pcs 40HQ: 1244 cartons * 2 pcs = 2488 pcs

Read more less

1. This cute silicone case is suitable for Micro:bit V1 and V2 development boards. All the openings are specially designed for the second-generation Micro:bit development board and will not affect the speaker, touch logo and microphone.2. The dot matrix light is clearly visible: The thickness of the silicone shell is 1.5mm, the thickness of the dot matrix area is 1mm, and the thickness of the LED cell is 0.5mm. The dot matrix light can easily pass through the silicone shell and be clearly displayed on the shell.3. The silicone shell has speaker holes, reset button caps, micro USB interfaces and battery power interfaces, which are convenient for sound playback, reset, power supply and programming of the development board.4. Users can install it on expansion boards or robots. It not only protects the Micro:bit development board but also makes your work more attractive.5. Dimensions: 56.5 x 10.2 x 37mm6. Material: Silicone (environmentally friendly material)7. Compatible mainboards: Suitable for micro:bit V1.5/micro:bit V2.XSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 160 Carton Weight 9.10kgs / 20.06lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 160 pcs = 93280 pcs 40HQ: 1354 cartons * 160 pcs = 216640 pcs

Read more less

1. The K230 visual recognition module is equipped with a 1080P/60FPS high-definition camera, is compact and exquisite, and can be easily integrated into various AI visual application scenarios. It is an ideal choice for electronic competitions.2. The K230 is programmed and developed using MicroPython language. Users can easily handle multiple visual applications such as color recognition, object counting, QR code recognition, face recognition, character recognition, and self-training without mastering AI model algorithms, greatly lowering the threshold for AI learning.3. The module integrates a WiFi chip and supports IoT connections. It can be connected to a cloud platform to access large language models, enabling intelligent dialogue and voice question-answering functions.4. Windows-based upper computer software is provided, supporting RTSP real-time video stream monitoring, and integrating video/image processing tools, data generators, text tools, and other contents.5. Audio processing support: The K230 integrates a microphone and supports audio recording, enabling keyword wake-up and voice-to-text functions. Combined with large language models, it can conduct language dialogues and provide an intelligent interactive experience.6. Expandable speaker: It supports external speakers and, in combination with large language models, can achieve voice dialogue. It can also be linked with AI image processing functions to broadcast visual recognition results in real time.7. Supports multiple development platforms: It can be connected to PC computers, MSPMO, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK, and other mainstream controllers for development.8. CanMV development environment: The K230 visual recognition module uses CanMV IDE as the development environment. It is simple and convenient to operate, with the IDE providing function input parameter and related content prompts. The code does not require compilation and can be modified and debugged online. The code can be directly downloaded to the K230 module for operation.9. Additionally, we provide over 100 development resource tutorials and program source codes to facilitate users secondary development and learning, helping you realize various rich AI creative projects.Parameters:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps--JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Onboard functions: microphone, buzzer, RGB light, WiFi network card9. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot10. Power supply: Type-C/communication interface 5V input/GPIO 5V input11. Working current: 0.6A12. Working power: 3W13. Buttons: reset button + custom function button14. Size: 75 x 47 x 19.7mmSpecification: Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 14cm * 12cm * 8cm / 5.51inch * 4.72inch * 3.15inch Qty per Carton 36 Carton Weight 7.40kgs / 16.31lb Carton Size 44cm * 38cm * 34cm / 17.32inch * 14.96inch * 13.39inch Loading Container 20GP: 469 cartons * 36 pcs = 16884 pcs 40HQ: 1088 cartons * 36 pcs = 39168 pcs

Read more less

1. This PCIe to M.2 expansion board specially designed for Raspberry Pi 5 is designed to bring more possibilities to your Raspberry Pi projects. With this expansion board, you can easily connect a high-speed M.2 NVMe solid-state drive to the Raspberry Pi 5, greatly increasing data transfer speed and storage capacity. It supports M.2 solid-state drives of various sizes (such as 2230, 2242, 2260 and 2280), and the installation process is simple and intuitive, so you can get started quickly without complicated settings. It not only expands the storage space of Raspberry Pi 5, but also provides better support for your computing tasks, making your Raspberry Pi 5 capable of more complex application scenarios.2. Compatible with four sizes of solid state drives (2230/2242/2260/2280). 3. The stack is installed on the back of the Raspberry Pi without affecting heat dissipation and case installation. 4. Can improve data transmission speed, suitable for projects with high-speed storage requirements. 5. Using high-quality materials and precision manufacturing processes to ensure stable operation and long-term durability.Parameters:1. M.2 M-Key: NVMe protocol, supports M.2 SSD hard disk (2230/2242/2260/2280)2. SSD function: supports an SSD hard disk to boot the system, and storage expansion or only storage expansion3. LED indicator: power indicator, ACT hard disk status indicator4. M.2 device power supply current: 3A5. PCle 2.0 interface rate: theoretical peak transfer rate 500MB/s6. Compatible with PCIe standards: Gen2 and Gen37. FPC line parameters: 0.5mm pitch FPC line8. Screw copper column: M2.5 x 10 dual-channel 4; M2.5 x 5+6 single-channel 49. Size: 88 mm x 56 mm x 1.7 mm10. Weight: 5.2gSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 54 Carton Weight 5.40kgs / 11.90lb Carton Size 44cm * 32cm * 32cm / 17.32inch * 12.6inch * 12.6inch Loading Container 20GP: 591 cartons * 54 pcs = 31914 pcs 40HQ: 1373 cartons * 54 pcs = 74142 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 90 Carton Weight 12.60kgs / 27.78lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 90 pcs = 44100 pcs 40HQ: 1137 cartons * 90 pcs = 102330 pcs

Read more less

1. The K230 visual recognition module is equipped with a 1080P/60FPS high-definition camera, is compact and exquisite, and can be easily integrated into various AI visual application scenarios. It is an ideal choice for electronic competitions.2. The K230 is programmed and developed using MicroPython language. Users can easily handle multiple visual applications such as color recognition, object counting, QR code recognition, face recognition, character recognition, and self-training without mastering AI model algorithms, greatly lowering the threshold for AI learning.3. The module integrates a WiFi chip and supports IoT connections. It can be connected to a cloud platform to access large language models, enabling intelligent dialogue and voice question-answering functions.4. Windows-based upper computer software is provided, supporting RTSP real-time video stream monitoring, and integrating video/image processing tools, data generators, text tools, and other contents.5. Audio processing support: The K230 integrates a microphone and supports audio recording, enabling keyword wake-up and voice-to-text functions. Combined with large language models, it can conduct language dialogues and provide an intelligent interactive experience.6. Expandable speaker: It supports external speakers and, in combination with large language models, can achieve voice dialogue. It can also be linked with AI image processing functions to broadcast visual recognition results in real time.7. Supports multiple development platforms: It can be connected to PC computers, MSPMO, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK, and other mainstream controllers for development.8. CanMV development environment: The K230 visual recognition module uses CanMV IDE as the development environment. It is simple and convenient to operate, with the IDE providing function input parameter and related content prompts. The code does not require compilation and can be modified and debugged online. The code can be directly downloaded to the K230 module for operation.9. Additionally, we provide over 100 development resource tutorials and program source codes to facilitate users secondary development and learning, helping you realize various rich AI creative projects.Parameters:1. CPU:--CPU 0: RISC-V processor, 0.8GHz, 32KB I-cache, 32KB D-cache, 128KB L2 Cache--CPU 1: RISC-V processor, 1.6GHz, 32KB I-cache, 32KB D-cache, 256KB L2 Cache, 128bit RVV 1.0 extension2. KPU:--6TOPS equivalent computing power, support INT8 and INT16--Typical network performance: Resnet 50 equals 85fps at INT8; Mobilenet_v2 equals 670fps at INT8; YoloV5S equals 38fps at INT83. DPU: 3D structured light depth engine, maximum resolution supports 1920 x 10804. VPU:--Encoder performance: 3840 x 2160 at 20fps--Decoder performance: 3840 x 2160 at 40fps--JPEG codec: supports up to 8K (8192 x 8192) resolution5. Running memory: 1GB LPDDR46. Development environment: CanMV IDE microPython programming7. Image input: Onboard 2 million HD camera (GC2093)8. Onboard functions: microphone, buzzer, RGB light, WiFi network card9. Onboard interface: speaker interface, fan interface, Type-C interface, serial communication interface, GPIO expansion interface, TF card slot10. Power supply: Type-C/communication interface 5V input/GPIO 5V input11. Working current: 0.6A12. Working power: 3W13. Buttons: reset button + custom function button14. Size: 75 x 47 x 19.7mmSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 24cm * 20cm * 10cm / 9.45inch * 7.87inch * 3.94inch Qty per Carton 16 Carton Weight 4.30kgs / 9.48lb Carton Size 50cm * 42cm * 34cm / 19.69inch * 16.54inch * 13.39inch Loading Container 20GP: 373 cartons * 16 pcs = 5968 pcs 40HQ: 867 cartons * 16 pcs = 13872 pcs

Read more less

1. This cute silicone case is suitable for Micro:bit V1 and V2 development boards. All the openings are specially designed for the second-generation Micro:bit development board and will not affect the speaker, touch logo and microphone.2. The dot matrix light is clearly visible: The thickness of the silicone shell is 1.5mm, the thickness of the dot matrix area is 1mm, and the thickness of the LED cell is 0.5mm. The dot matrix light can easily pass through the silicone shell and be clearly displayed on the shell.3. The silicone shell has speaker holes, reset button caps, micro USB interfaces and battery power interfaces, which are convenient for sound playback, reset, power supply and programming of the development board.4. Users can install it on expansion boards or robots. It not only protects the Micro:bit development board but also makes your work more attractive.5. Dimensions: 56.5 x 10.2 x 37mm6. Material: Silicone (environmentally friendly material)7. Compatible mainboards: Suitable for micro:bit V1.5/micro:bit V2.XSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 160 Carton Weight 9.10kgs / 20.06lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 160 pcs = 93280 pcs 40HQ: 1354 cartons * 160 pcs = 216640 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 7.80kgs / 17.20lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 90 Carton Weight 12.60kgs / 27.78lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 90 pcs = 44100 pcs 40HQ: 1137 cartons * 90 pcs = 102330 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 5.90kgs / 13.01lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 10.70kgs / 23.59lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. This tracking module uses four tracking probes and optimizes the spacing layout. The two inner probes can precisely identify the black lines, while the two outer probes can assist the inner probes in identifying the black lines and provide warnings. The vehicle can recognize 90-degree turns and other complex road surfaces.2. The knob-type adjustable resistor is combined with a professional operational amplifier circuit, allowing the adjustment of sensor sensitivity.3. You can connect it to the intelligent car or expansion board using jumper wires or DuPont cables for various experiments. The module is reserved with holes for installing copper columns and screws, making it convenient for you to expand by yourself.4. High-quality infrared probes, with onboard four-channel comparator circuits.5. 1.6-inch thick shock-resistant PCB.6. The module uses 6-pin pins and has an anti-reverse connection design for interfaces, which can effectively prevent positive and negative pole reverse connection and avoid module damage. It is simple and convenient to use.7. High-precision knob adjustment with a wide linear adjustable range.8. Reference materials, driver source code and graphical programming tools are provided. Parameters:1. Operating Voltage: 3.3V - 5V2. Operating Temperature: -10 to +50 degrees Celsius3. Installation Hole Diameter: M3 copper post/screw4. Operating Current: 10mA - 50mA5. Detection Distance: Adjustable from 1mm to 50mm (recommended around 8mm)6. Product Size: 70 x 29mm7. Output Interface: 6-pin interface, 1234 are 4 signal output terminals, + represents positive power supply, - represents negative power supply8. Output Signal: TTL level (can be directly connected to the I/O port of the microcontroller)Specification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 7.80kgs / 17.20lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 96 pcs = 47040 pcs 40HQ: 1137 cartons * 96 pcs = 109152 pcs

Read more less

1. The Raspberry Pi 4 Model B is a compact yet powerful single-board computer designed for DIY enthusiasts, developers, and tech innovators. With enhanced processing power, versatile connectivity, and dual-display support, it’s ideal for projects ranging from desktop computing to smart home automation.2. Upgraded Quad-Core Processor: BCM2711B0 Chipset - 64-bit ARM Cortex-A72 CPU (1.5GHz quad-core) delivers 2–3 times faster performance compared to earlier models. Smooth multitasking: Optimized for programming, media streaming, and complex applications.3. Flexible Memory Options: 2GB, 4 GB, or 8 GB RAM variants - choose the right configuration for your project needs.4. Dual micro HDMI ports: Drive two 4K screens simultaneously at 60Hz for multitasking or immersive multimedia experiences.5. Advanced Connectivity:--Gigabit Ethernet: Wired speeds up to 1000Mbps.--Dual-band Wi-Fi (2.4GHz/5GHz) & Bluetooth 5.0: Stable wireless connections for IoT and peripheral devices.6. 2× USB 3.0 + 2× USB 2.0: Transfer data up to 5Gbps (USB 3.0) for external storage or peripherals.7. 5V/3A USB Type-C supply: Enhanced power efficiency for stable operation.Technical Specifications1. Dimensions: 85mm × 56mm × 17mm2. GPU: Broadcom VideoCore VI @ 500MHz3. Power Input: 5V/3A via USB-CSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 2cm / 5.51inch * 3.94inch * 0.79inch Qty per Carton 144 Carton Weight 15.50kgs / 34.17lb Carton Size 30cm * 32cm * 50cm / 11.81inch * 12.6inch * 19.69inch Loading Container 20GP: 555 cartons * 144 pcs = 79920 pcs 40HQ: 1289 cartons * 144 pcs = 185616 pcs

Read more less

1. The Raspberry Pi 4 Model B is a compact yet powerful single-board computer designed for DIY enthusiasts, developers, and tech innovators. With enhanced processing power, versatile connectivity, and dual-display support, it’s ideal for projects ranging from desktop computing to smart home automation.2. Upgraded Quad-Core Processor: BCM2711B0 Chipset - 64-bit ARM Cortex-A72 CPU (1.5GHz quad-core) delivers 2–3 times faster performance compared to earlier models. Smooth multitasking: Optimized for programming, media streaming, and complex applications.3. Flexible Memory Options: 2GB, 4 GB, or 8 GB RAM variants - choose the right configuration for your project needs.4. Dual micro HDMI ports: Drive two 4K screens simultaneously at 60Hz for multitasking or immersive multimedia experiences.5. Advanced Connectivity:--Gigabit Ethernet: Wired speeds up to 1000Mbps.--Dual-band Wi-Fi (2.4GHz/5GHz) & Bluetooth 5.0: Stable wireless connections for IoT and peripheral devices.6. 2× USB 3.0 + 2× USB 2.0: Transfer data up to 5Gbps (USB 3.0) for external storage or peripherals.7. 5V/3A USB Type-C supply: Enhanced power efficiency for stable operation.Technical Specifications1. Dimensions: 85mm × 56mm × 17mm2. GPU: Broadcom VideoCore VI @ 500MHz3. Power Input: 5V/3A via USB-CSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 14cm * 10cm * 2cm / 5.51inch * 3.94inch * 0.79inch Qty per Carton 144 Carton Weight 15.50kgs / 34.17lb Carton Size 30cm * 32cm * 50cm / 11.81inch * 12.6inch * 19.69inch Loading Container 20GP: 555 cartons * 144 pcs = 79920 pcs 40HQ: 1289 cartons * 144 pcs = 185616 pcs

Read more less

1. High-performance MCU with RISC-V 32-bit dual-core and single-core processors2 Powerful image and voice processing capabilities, image and voice processing interfaces including JPEG encoder/decoder, pixel processing accelerator (PPA), image signal processor (ISP),264 video encoder3. 32MB PSRAM stacked inside the chip package, 32MB Nor Flash integrated outside the package4. Common peripheral interfaces out on the board include MIPI-CSI, MIPI-DSI, USB 2.0 OTG HS, SDIO 3.0 TF card, dual microphones (with echo cancellation), speaker terminals, and RTC battery terminals, etc.5. 2 x 20 pin headers brought out on the board with 28 remaining programmable GPIO interfaces brought out6. Security mechanisms: secure boot, Flash encryption, hardware encryption accelerator, and hardware random number generator. It supports hardware access protection, which can implement access permission management (APM) and permission separation7. Can be applied to scenarios such as indoor environmental monitoring/digital dashboard/smart/computer performance monitoring, etc.8. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit, meeting daily audio application scenarios9. Highly integrated, powerful performance, using ESP32-P4-Core module integrated design, built-in ESP32-P4, 32MB Nor Flash10. 170 degree ultra-wide viewing angle, excellent display performance, high contrast, high viewing angle11. Supports 10-point touch, intuitive operation and rapid response are deeply integrated, making development efficient and convenient12. Supports mainstream AI platforms, and can be connected to online large model platforms such deepseekScreen parameters:1. Resolution: 3.4 inch: 800 x 800 pixels; 4 inch: 720 x 720 pixels.2. Color gamut: 3.4 inch: percent 70 NTSC; 4 inch: percent 60 NTSC3. Contrast ratio: 1200:14. Touchscreen chipset: GT92715. Communication interface: MIPI 2-lane6. Brightness: 3.4 inch: 300 cd/m2; 4 inch: 350 cd/m27. Dimensions: 3.4 inch: 11.5 x 11.5 cm; 4 inch: 12.6 x 12.6 cm8. Display size: 3.4 inch: 8.76 x 8.76 cm; 4 inch: 10.152 x 10.152 cm9. Operating temperature: 0-60 degree celsiusProduct package: display × 1; 4-pin cable × 2; speaker × 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 18cm * 16cm * 6cm / 7.09inch * 6.3inch * 2.36inch Qty per Carton 30 Carton Weight 5.00kgs / 11.02lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 30 pcs = 13140 pcs 40HQ: 1018 cartons * 30 pcs = 30540 pcs

Read more less

1. Compact in size, lightweight2. High torque with stable operation3. Maximum torque: 0.355. Minimum torque: 0.256. Rated power: 8W7. Voltage: 3.7V8. Suitable for electric screwdriversSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 3cm * 5cm * 3cm / 1.18inch * 1.97inch * 1.18inch Qty per Carton 1185 Carton Weight 37.00kgs / 81.57lb Carton Size 47cm * 38cm * 35cm / 18.5inch * 14.96inch * 13.78inch Loading Container 20GP: 426 cartons * 1185 pcs = 504810 pcs 40HQ: 990 cartons * 1185 pcs = 1173150 pcs

Read more less

1. Sensor: Sony IMX708 2. Pixel: 11.9 MP (4608 x 2592) 3. Focus mode: I2C controller, support autofocus 4. CMOS size: 7.4mm 5. Diagonal field of view (FOV): 75/120 degrees6. Focal length: 75 degrees: 4.74mm, 120 degrees: 2.75mm 7. Aperture: 75 degrees: F1.8, 120 degrees: F2.2 8. Support equipment: compatible with Raspberry Pi all motherboard models (access to Raspberry Pi 5 and Zero series motherboards need to provide their own adapter cable) 9. Description: night vision function needs to be used with infrared fill light (not included)Features: 1. Compatible with Raspberry Pi series motherboards2. NolR is the night vision version, remove the IR filter, can be used with IR fill light to realize the night vision function, the night vision version of the image will be reddish in the daytime use3. 12 megapixels, support high dynamic range (HDR), better photo quality4. Support autofocus, focus control is more freeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. For Raspberry Pi 40PIN GPIO interface, suitable for Raspberry Pi series motherboards2. Adopts PCM5122 professional stereo audio codec chip, controlled by I2C interface, audio transmission via I2S interface3. Built-in standard 3.5mm headphone connector, can play music through external headphones4. Built-in RCA port, can be applied to a variety of working scenarios, such as speakers and amplifiers 5. Built-in EEPROM firmware, for Raspberry Pi OS automatically load the driver6. Maximum support for sampling frequency 384KHz 7. Maximum support for 32-bit resolution8. Size: about 6.5 x 3cmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 430 Carton Weight 14.00kgs / 30.86lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 430 pcs = 188340 pcs 40HQ: 1018 cartons * 430 pcs = 437740 pcs

Read more less

1. Sensor: Sony IMX708 2. Pixel: 11.9 MP (4608 x 2592) 3. Focus mode: I2C controller, support autofocus 4. CMOS size: 7.4mm 5. Diagonal field of view (FOV): 75/120 degrees6. Focal length: 75 degrees: 4.74mm, 120 degrees: 2.75mm 7. Aperture: 75 degrees: F1.8, 120 degrees: F2.2 8. Support equipment: compatible with Raspberry Pi all motherboard models (access to Raspberry Pi 5 and Zero series motherboards need to provide their own adapter cable) 9. Description: night vision function needs to be used with infrared fill light (not included)Features: 1. Compatible with Raspberry Pi series motherboards2. NolR is the night vision version, remove the IR filter, can be used with IR fill light to realize the night vision function, the night vision version of the image will be reddish in the daytime use3. 12 megapixels, support high dynamic range (HDR), better photo quality4. Support autofocus, focus control is more freeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Sensor: Sony IMX708 2. Pixel: 11.9 MP (4608 x 2592) 3. Focus mode: I2C controller, support autofocus 4. CMOS size: 7.4mm 5. Diagonal field of view (FOV): 75/120 degrees6. Focal length: 75 degrees: 4.74mm, 120 degrees: 2.75mm 7. Aperture: 75 degrees: F1.8, 120 degrees: F2.2 8. Support equipment: compatible with Raspberry Pi all motherboard models (access to Raspberry Pi 5 and Zero series motherboards need to provide their own adapter cable) 9. Description: night vision function needs to be used with infrared fill light (not included)Features: 1. Compatible with Raspberry Pi series motherboards2. NolR is the night vision version, remove the IR filter, can be used with IR fill light to realize the night vision function, the night vision version of the image will be reddish in the daytime use3. 12 megapixels, support high dynamic range (HDR), better photo quality4. Support autofocus, focus control is more freeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Interface standard: conforms to RS485 standard2. Physical interface: RS485 terminal block3. Communication rate: 300bps - 460800bps baud rate (self-adaptation)4. Support points: each RS485 interface support up to 32 nodes5. Communication distance: 1200m (9600bps), the higher the communication rate, the shorter the distance6. Working mode: RS485 two-wire (A, B), half-duplex transparent transmission7. Supply voltage: DC 7V - 36V8. Operating temperature: -45 to 85 degrees Celsius9. Ambient humidity: less than 95%RH10. Transmission medium: ordinary parallel/twisted pair cable11. Size: about 12.1 x 7.2 x 3cmFeatures:1. RS485 network relay, expansion and isolation functions can be realized2. Adopts terminal block type power access3. Built-in optoelectronic isolation protection circuit, RS485 master-slave device isolation, RS485 master-slave device can effectively protect the device from static electricity, thunderbolt and surge damage between the devices, can be applied to industrial environments with high requirements for reliability and safety4. Rail-type housing design, easy to install5. Suitable for data acquisition, IoT gateway, security IoT and smart meter monitoring and other fieldsSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 80 Carton Weight 13.00kgs / 28.66lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 80 pcs = 37280 pcs 40HQ: 1083 cartons * 80 pcs = 86640 pcs

Read more less

1. Sensor: Sony IMX708 2. Pixel: 11.9 MP (4608 x 2592) 3. Focus mode: I2C controller, support autofocus 4. CMOS size: 7.4mm 5. Diagonal field of view (FOV): 75/120 degrees6. Focal length: 75 degrees: 4.74mm, 120 degrees: 2.75mm 7. Aperture: 75 degrees: F1.8, 120 degrees: F2.2 8. Support equipment: compatible with Raspberry Pi all motherboard models (access to Raspberry Pi 5 and Zero series motherboards need to provide their own adapter cable) 9. Description: night vision function needs to be used with infrared fill light (not included)Features: 1. Compatible with Raspberry Pi series motherboards2. NolR is the night vision version, remove the IR filter, can be used with IR fill light to realize the night vision function, the night vision version of the image will be reddish in the daytime use3. 12 megapixels, support high dynamic range (HDR), better photo quality4. Support autofocus, focus control is more freeSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 320 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 320 pcs = 140160 pcs 40HQ: 1018 cartons * 320 pcs = 325760 pcs

Read more less

1. Screen size: 5 inches2. Resolution: 720 x 12803. Display interface: DSI4. Display panel: IPS5. Viewing angle: 160 degrees6. Touch type: capacitive touch7. Touch points: five-point touch8. Touch interface: I2C9. For Raspberry Pi 3A + / 3B + / 4B / 5, CM3 / 3 + / 4 / 5, support for Raspberry Pi OS10. Size: about 14.34 x 9.15 x 1.59cmFeatures:1. IPS display panel, excellent display performance, viewing angle up to 160 degrees2. 5-point touch support, the actual number of touch points with the software system3. Suitable for interactive projects, such as tablet PCs, entertainment systems and information dashboards4. Operating system provides touch screen driver, support five-finger touch and on-screen keyboard, no need to connect additional keyboard or mouse5. Default is vertical display, the resolution is 720 x 1280 (H x V), you can modify the software settings, for horizontal displaySpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 16cm * 10cm * 3cm / 6.3inch * 3.94inch * 1.18inch Qty per Carton 100 Carton Weight 41.00kgs / 90.39lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 100 pcs = 43800 pcs 40HQ: 1018 cartons * 100 pcs = 101800 pcs

Read more less

1. Display panel: AMOLED2. Display resolution: 466 x 4663. Display brightness: 500cd/square meter4. Communication interface: QSPI5. Touch: support6. Display size: 1.32 inch7. Display color: 16.7M8. Contrast ratio: 10000:19. Driver IC: CO5300 10. Touch IC: CST82011. Size: about 3.64 x 1cmFeatures:1. Equipped with ESP32-S3 high-performance Xtensa 32-bit LX7 dual-core processor up to 240MHz.2. 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) support, on-board antenna 3. Built-in 512KB SRAM and 384KB ROM, overlay 8MB PSRAM and 8MB Flash4. 1.32-inch capacitive touch HD AMOLED screen on board, 466 x 466 resolution, 16.7 M color, can display color pictures clearly 5. Built-in CO5300 driver chip and CST820 capacitive touch chip, respectively, using QSPI and I2C interface communication, does not take up too much interface pin resources 6. On-board PWR, BOOT two customizable functions of the side button, easy to use the button for custom function development 7. Onboard 3.7V MX1.25 lithium battery charging and discharging interface 8. Equipped with ES8311 low-power audio codec chip, supports high-quality audio input and output, to meet the voice interaction and audio playback and other application requirements 9. SH1.0 12PIN expansion connector, can be used for DIY expansion function. 10. AMOLED screen with higher contrast ratio, wider viewing angle, richer colors, faster response and better visual effects, slim design, low power consumption, flexibleSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 280 Carton Weight 29.00kgs / 63.93lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 280 pcs = 115360 pcs 40HQ: 958 cartons * 280 pcs = 268240 pcs

Read more less

1. RP2350B microcontroller chip designed for Raspberry Pi2. Unique dual-core, dual-architecture design featuring dual-core ARM Cortex-M33 processors and dual-core Hazard3 RISC-V processors, each clocked at up to 150MHz, enabling flexible switching between architectures3. Equipped with the Raspberry Pi Radio Module 2, supporting Wi-Fi 4 wireless networking and Bluetooth 5.24. Features 520KB of SRAM and 16MB of on-chip Flash, with a reserved PSRAM interface5. Utilizes a Type-C interface, eliminating orientation concerns6. Supports USB 1.1 host and device functionality7. Supports low-power sleep and hibernation modes8. USB mass storage mode for drag-and-drop program downloads9. 41 versatile GPIO pins10. 1 HSTX, 2 SPI, 2 I2C, 2 UART, 6 12-bit ADCs, and 22 controllable PWM channels11. Precise on-chip clock and timers12. Temperature sensor13. On-chip accelerated floating-point library14. 12 programmable I/O (PIO) state machines for custom peripheral supportSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 4cm * 3cm / 3.54inch * 1.57inch * 1.18inch Qty per Carton 512 Carton Weight 17.00kgs / 37.48lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 512 pcs = 210944 pcs 40HQ: 958 cartons * 512 pcs = 490496 pcs

Read more less

1. Display panel: AMOLED2. Display resolution: 466 x 4663. Display brightness: 500cd/square meter4. Communication interface: QSPI5. Touch: support6. Display size: 1.32 inch7. Display color: 16.7M8. Contrast ratio: 10000:19. Driver IC: CO5300 10. Touch IC: CST82011. Size: about 3.64 x 1cmFeatures:1. Equipped with ESP32-C6 high-performance 32-bit RISC-V processor up to 160MHz2. Integrated Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication with excellent RF performance3. Built-in 512KB HP SRAM, 16KB LP SRAM and 320KB ROM with 16MB Flash overlay 4. 1.32 inch capacitive touch HD AMOLED screen on board, 466 x 466 resolution, 16.7 M color, can display color pictures clearly 5. Built-in CO5300 driver chip and CST820 capacitive touch chip, respectively, using QSPI and I2C interface communication, does not take up too much interface pin resources 6. On-board PWR, BOOT two customizable functions of the side button, easy to use the button for custom function development 7 Onboard 3.7V MX1.25 lithium battery charging and discharging interface 8. Equipped with ES8311 low-power audio codec chip, supports high-quality audio input and output, to meet the voice interaction and audio playback and other application requirements 9. SH1.0 12PIN expansion interface, can be used for DIY expansion of functions 10. AMOLED screen with higher contrast ratio, wider viewing angle, richer colors, faster response and better visual effects, slim design, low power consumption, flexibleSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 8cm * 8cm * 3cm / 3.15inch * 3.15inch * 1.18inch Qty per Carton 280 Carton Weight 29.00kgs / 63.93lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 280 pcs = 115360 pcs 40HQ: 958 cartons * 280 pcs = 268240 pcs

Read more less

1. CM5 cradle: for all versions of Compute Module 5 2. Networking: 1000M Ethernet RJ45 interface, 2500M Ethernet RJ45 interface3. Connector: Raspberry Pi 40PIN GPIO interface 4. USB: USB 3.2 Gen1 x 2 5. MIPI: 4-lane MIPI interface x 2 (22PIN 0.5mm FFC connector) 6. Video: HDMI connector x 2, supports dual 4K outputs 7. M.2: M.2 M KEY (PCle Gen2/3 x 1) 8. M.2 (4G /5G): M.2 B KEY, support access to 4G/5G communication module 9. Storage: onboard Micro SD card slot (for CM5 version without eMMC) 10. Fan nterface: 5V, 4PIN JST-SH PWM fan connector11. Power input: 7V - 36V wide voltage (round hole terminal), 5V 5A (Type-C) 12. Size:- Base plate: about 9.96 x 8.7cm)- Housing: about 10.48 x 9 x 2.97cmFeatures:1. 40PIN GPIO interface and standard CM5 connector on board, support access to Compute Module 5 Lite / eMMC series core boards2. Support M.2 NVMe hard disk, greatly improve the read and write speed of the system or file, support NVMe SSD boot3. Equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other interfaces, more convenient to use4. Careful hole design ensures that each port fits the motherboard with clear silkscreen markings on the ports for easy viewing5. Shell reserved vents on the top of the better heat dissipation effect6. Wall-mounted holes on both sides of the design, more convenient to install and fix, in the back of the reserved rail mounting screw holes, you can fix the rail (not included)Packing list:- Expansion board x 1- Metal case x 1- Fan x 1- Power cord x 1- Plug x 4- Screws x 10Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 16cm * 12cm * 6cm / 6.3inch * 4.72inch * 2.36inch Qty per Carton 45 Carton Weight 23.50kgs / 51.81lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 45 pcs = 19710 pcs 40HQ: 1018 cartons * 45 pcs = 45810 pcs

Read more less

1. Features a high-performance Xtensa 32-bit LX7 dual-core processor with a clock speed up to 240MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with onboard antennas3. Integrated 512KB SRAM and 384KB ROM, with stacked 16MB Flash and 8MB PSRAM4. Onboard 4-inch LCD display, 480 x 480 resolution, 65K colors5. Supports I2C interface for capacitive touch control, 5-point touch6. Supports precise control via flexible clock settings and independent module power configuration, enabling multi-scenario low-power modes7. IPS display panel with outstanding performance and 160° viewing angle8. On-board ES8311 audio codec and ES7210 echo cancellation circuit for everyday audio applications9. Supports mainstream AI platforms, compatible with online large-model platforms like Doubao and DeepSeek10. Suitable for smart switches, HMI interfaces, smart home terminals, and similar applications11. Size: about 8.65 x 8.65 x 1.4 cmSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 10cm * 10cm * 4cm / 3.94inch * 3.94inch * 1.57inch Qty per Carton 108 Carton Weight 13.00kgs / 28.66lb Carton Size 50cm * 32cm * 32cm / 19.69inch * 12.6inch * 12.6inch Loading Container 20GP: 520 cartons * 108 pcs = 56160 pcs 40HQ: 1209 cartons * 108 pcs = 130572 pcs

Read more less

1. Operating voltage:- Bare screen version: 3.3V - Module version: 3.3V/5V 2. Communication interface: 3-wire SPI, 4-wire SPI 3. Dot pitch: 0.1833 x 0.1833mm4. Resolution: 648 x 480 pixels5. Display color: red, yellow, black, white 6. Gray scale level: 2 7. Fast refresh: 12s 8. Global refresh: 20s 9. Refresh power consumption: less than 100mW 10. Sleep current: less than 0.01uA (close to 0) 11. Viewing angle: more than 170 degrees12. Display size: about 118.78 x 88.22 mm13. External size:- Bare screen: about 125.4 x 99.5 x 1.2mm- Module: about 30.5 x 65mmFeatures:1. Based on Raspberry Pi 40PIN interface design, suitable for Raspberry Pi series motherboards, Jetson Nano2. Reserved SPI control interface, can be connected to Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32 and other motherboards3. On-board level shifter chip, compatible with 3.3V and 5V level interface4. Suitable for shopping mall price tags, asset and equipment tags, electronic shelf tags and conference name tags, etc.Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 100 pcs = 40100 pcs 40HQ: 930 cartons * 100 pcs = 93000 pcs

Read more less

1. Operating voltage:- Bare screen version: 3.3V - Module version: 3.3V/5V 2. Communication interface: 3-wire SPI, 4-wire SPI 3. Dot pitch: 0.1833 x 0.1833mm4. Resolution: 648 x 480 pixels5. Display color: red, yellow, black, white 6. Gray scale level: 2 7. Fast refresh: 12s 8. Global refresh: 20s 9. Refresh power consumption: less than 100mW 10. Sleep current: less than 0.01uA (close to 0) 11. Viewing angle: more than 170 degrees12. Display size: about 118.78 x 88.22 mm13. External size:- Bare screen: about 125.4 x 99.5 x 1.2mm- Module: about 30.5 x 65mmFeatures:1. Based on Raspberry Pi 40PIN interface design, suitable for Raspberry Pi series motherboards, Jetson Nano2. Reserved SPI control interface, can be connected to Raspberry Pi / Jetson Nano / ESP32 / Arduino / STM32 and other motherboards3. On-board level shifter chip, compatible with 3.3V and 5V level interface4. Suitable for shopping mall price tags, asset and equipment tags, electronic shelf tags and conference name tags, etc.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 100 pcs = 40100 pcs 40HQ: 930 cartons * 100 pcs = 93000 pcs

Read more less

1. Screen size: 9 inches2. Resolution: 720 x 12803. Display interface: DSI4. Display panel: IPS5. Viewing angle: 160 degrees6. Touch type: capacitive touch7. Number of touch points: 10-point touch8. Touch panel: tempered glass panel 9. Touch interface: I2C 10. Brightness: 500 cd/m211. for Raspberry Pi Pi 3A + / 3B + / 4B / 5, CM3 / 3 + / 4 / 5, support Raspberry Pi OS12. Size: about 22.3 x 14 x 1.3cmFeatures:1. IPS display panel, excellent display performance, viewing angle up to 160 degrees2. High color gamut quantum lamp technology, higher color gamut, more pure color3. 10-point touch support, the actual number of touch points is related to the software system.4. Tempered glass panel, hardness of 6H5. Brightness of backlight can be adjusted by software.6. Default is vertical display, the resolution is 720 x 1280 (H x V), you can modify the software settings, horizontal displaySpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 24cm * 16cm * 4cm / 9.45inch * 6.3inch * 1.57inch Qty per Carton 36 Carton Weight 15.40kgs / 33.95lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 36 pcs = 14832 pcs 40HQ: 958 cartons * 36 pcs = 34488 pcs

Read more less

1. CM5 card slot: compatible with all versions of Compute Module 52. Networking: gigabit ethernet RJ45 port3. Connectors: 16-pin PCIe (PCIe Gen2/3 x 1) Raspberry Pi 40-pin GPIO interface4. USB: USB 3.2 Gen1 x 2; USB 2.0 x 25. MIPI: 4-lane MIPI interface × 2 (22-pin 0.5mm FFC connector)6. Video: HDMI interface x 2, supporting dual 4K output7. Audio: compatible with standard 3.5mm headphone jacks for audio input/output via accessory module8. Storage: onboard Micro SD card slot (For CM5 versions without eMMC)9. Fan Interface: 5V, 4-pin JST-SH PWM fan connector10. Power Input: DC 5V 5A11. Onboard 40-pin GPIO interface and standard CM5 connector, supporting Compute Module 5 Lite / eMMC series core boards12. Onboard USB audio decoder chip, supports microphone connection13. Size: about 8.5 x 5.6 cmPackage contents:- CM5-to-Pi5-Adapter x 1- Audio-Adapter x 1- MX1.25 4-pin dual-ended cable (approx. 200mm) x 1- Screw set x 1Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 160 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 160 pcs = 65760 pcs 40HQ: 956 cartons * 160 pcs = 152960 pcs

Read more less

1. CM5 cradle: for all versions of Compute Module 5 2. Networking: 1000M Ethernet RJ45 interface, 2500M Ethernet RJ45 interface3. Connector: Raspberry Pi 40PIN GPIO interface 4. USB: USB 3.2 Gen1 x 2 5. MIPI: 4-lane MIPI interface x 2 (22PIN 0.5mm FFC connector) 6. Video: HDMI connector x 2, supports dual 4K outputs 7. M.2: M.2 M KEY (PCle Gen2/3 x 1) 8. M.2 (4G /5G): M.2 B KEY, support access to 4G/5G communication module 9. Storage: onboard Micro SD card slot (for CM5 version without eMMC) 10. Fan nterface: 5V, 4PIN JST-SH PWM fan connector11. Power input: 7V - 36V wide voltage (round hole terminal), 5V 5A (Type-C) 12. Size:- Base plate: about 9.96 x 8.7cm)- Housing: about 10.48 x 9 x 2.97cmFeatures:1. 40PIN GPIO interface and standard CM5 connector on board, support access to Compute Module 5 Lite / eMMC series core boards2. Support M.2 NVMe hard disk, greatly improve the read and write speed of the system or file, support NVMe SSD boot3. Equipped with ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY and other interfaces, more convenient to use4. Careful hole design ensures that each port fits the motherboard with clear silkscreen markings on the ports for easy viewing5. Shell reserved vents on the top of the better heat dissipation effect6. Wall-mounted holes on both sides of the design, more convenient to install and fix, in the back of the reserved rail mounting screw holes, you can fix the rail (not included)Packing list:- Expansion board x 1- Metal case x 1- Fan x 1- Power cord x 1- Plug x 4- Screws x 10Specification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 16cm * 12cm * 6cm / 6.3inch * 4.72inch * 2.36inch Qty per Carton 45 Carton Weight 23.50kgs / 51.81lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 45 pcs = 19710 pcs 40HQ: 1018 cartons * 45 pcs = 45810 pcs

Read more less

1. Type-C port supports audio and video transmission with plug-and-play functionality, instantly enlarging your phone screen2. Split-screen collaboration on your computer boosts productivity with dual-display operation3. IPS panel ensures superior display performance and color reproduction. 108% sRGB coverage expands red, green, and blue color gamut areas, delivering professional-grade design color accuracy4. HDR true-color quality pursues natural color transitions. Matte screen design minimizes ambient light interference5. 120Hz ultra-high refresh rate screen elevates gaming and movie-watching experiences6. Supports up to 10-point touch (actual touch points depend on software system). Tempered glass panel with 6H hardness. Full-lamination screen for high clarity and dust resistance7. Dual-channel speakers with black magnetic Hi-Fi drivers deliver greater volume, wider sound range, and superior audio performance8. 180° foldable metal stand, durable and sturdy. Paired with anti-slip rubber pads on the screen base for stable use9. Size: about 42.319 x 24.961 x 9.6cmPackage contents:- 18.5-inch screen unit (with integrated stand) x 1- Mini HDMI to HDMI cable (approx. 1.5m) x 1- Type-C dual male connector cable (about 1m) x 1- USB Type-A to Type-C cable (about 1m) x 1- HDMI to Micro HDMI adapter x 1- 20W PD power adapter x 1Specification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 45cm * 27cm * 8cm / 17.72inch * 10.63inch * 3.15inch Qty per Carton 4 Carton Weight 4.00kgs / 8.82lb Carton Size 46cm * 28cm * 34cm / 18.11inch * 11.02inch * 13.39inch Loading Container 20GP: 608 cartons * 4 pcs = 2432 pcs 40HQ: 1413 cartons * 4 pcs = 5652 pcs

Read more less

1. Power supply: NFC wireless power supply 2. Display color: red, yellow, black, white 3. Dot pitch: 0.1943 x 0.1942 mm4. Resolution: 250 x 122 pixels5. Grayscale level: 2 6. Refresh time: 16s (excluding data transmission time) 7. Viewing angle: more than 170 degrees8. Display size: about 48.55 x 23.70mm9. Size: about 6.5 x 4 x 1.3cmFeatures:1. Passive NFC solution, no built-in battery, no need for cumbersome wiring2. When you need to refresh the display, you can use your NFC-enabled smartphone or card reader to wirelessly power up and refresh the display near the ink screen3. Suitable for shopping mall price tags, asset and equipment tags, electronic shelf tags and conference name tags, etc.4. ABS shell, beautiful and thin5. Environmental protection and energy saving, APP operation is simpleSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 10.60kgs / 23.37lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs 40HQ: 1018 cartons * 160 pcs = 162880 pcs

Read more less

1. Type-C port supports audio and video transmission with plug-and-play functionality, instantly enlarging your phone screen2. Split-screen collaboration on your computer boosts productivity with dual-display operation3. IPS panel ensures superior display performance and color reproduction. 108% sRGB coverage expands red, green, and blue color gamut areas, delivering professional-grade design color accuracy4. HDR true-color quality pursues natural color transitions. Matte screen design minimizes ambient light interference5. 120Hz ultra-high refresh rate screen elevates gaming and movie-watching experiences6. Supports up to 10-point touch (actual touch points depend on software system). Tempered glass panel with 6H hardness. Full-lamination screen for high clarity and dust resistance7. Dual-channel speakers with black magnetic Hi-Fi drivers deliver greater volume, wider sound range, and superior audio performance8. 180° foldable metal stand, durable and sturdy. Paired with anti-slip rubber pads on the screen base for stable use9. Size: about 42.319 x 24.961 x 9.6cmPackage contents:- 18.5-inch screen unit (with integrated stand) x 1- Mini HDMI to HDMI cable (approx. 1.5m) x 1- Type-C dual male connector cable (about 1m) x 1- USB Type-A to Type-C cable (about 1m) x 1- HDMI to Micro HDMI adapter x 1- 20W PD power adapter x 1Specification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 45cm * 27cm * 8cm / 17.72inch * 10.63inch * 3.15inch Qty per Carton 4 Carton Weight 4.00kgs / 8.82lb Carton Size 46cm * 28cm * 34cm / 18.11inch * 11.02inch * 13.39inch Loading Container 20GP: 608 cartons * 4 pcs = 2432 pcs 40HQ: 1413 cartons * 4 pcs = 5652 pcs

Read more less