DJI Mavic Series

1. For DJI Mini 3 Pro2. Available with ND16/64/256 light reduction filter set for daylight conditions3. For high light suppression and long exposure shooting, such as long exposure time lapse photography4. A wide range of landscapes can be captured5. Weight (individual): 0.75gPacking list:ND16 Scrimshaw x 1ND64 Scrimshaw x 1ND256 Scrimshaw x 1

Read more less

1. Each blade is checked by the precision dynamic balance, the flight noise is lower, the aerodynamic efficiency is higher, the power consumption is lower, and the endurance is improved2. Lower Noise, longer range3. Specifications: 1 pair of propeller4. Tip: please install the blades according to the instructions5. Adapters: for DJI Air 2S / Mavic Air 26. Size: 18.3 x 9.7 cm7. Single weight: 4.8 grams

Read more less

1. O3+ system image transmission, the signal is farther and more stable, supports image transmission distance of up to 15 kilometers, and the delay is as low as 120 milliseconds2. Adopts 5.5-inch 1080P high-brightness display, the global brightness of the screen can reach 1000 nits, and supports long-term high-brightness display3. Compatible with Wi-Fi 6 protocol, the download rate can reach 80MB/s4. Efficient and precise operation, delicate touch, help you fine composition5. Turn on the power to quickly connect to the aircraft, immediately enter the shooting state, and record wonderful moments at any time6. Can play 4K/120fps H.264 and 4K/120fps H.265 videos7. Equipped with mini-HDMI, full-function USB-C interface and microSD card slot8. Supports installation of third-party APP and live broadcast function, making editing and sharing more diverse9. Image transmission distance: 15 kilometers10. Delay time: 120 milliseconds11. Display: 5.5 inch, 1080P12. ​​Built-in battery: 5000mAh lithium battery13. Battery life: 3 hours14. Applicable models: For DJI Mavic 3 Pro, For DJI Mavic 3 Pro Cine, For DJI Mavic 3 Classic, For DJI Mavic 3, For DJI Mavic 3 Cine, For DJI Mini 3 Pro, For DJI Air 2SPacking list:-Remote control x 1-USB 3.0 Type-C cable x 1

Read more less

1. For DJI Mavic 3 Classic2. Precision optics designed to increase the FOV of a wide-angle camera to 108 degrees3. 15.5 mm equivalent focal length for a wider angle of view4. Weight (individual): 12.6 gramsPacking list:Widening lens x 1

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. Material: ABS, silicone2. Time-delay fixed speed/following the beat/360-degree rotation/compatible with a variety of models3. Stabilize the joystick of the remote control, and the shooting picture is smooth and clear4. Follow the shot at a fixed speed, and shoot smoothly to free your hands5. It can be adjusted and rotated 360 degrees to change the flight direction and control the angle freely6. Turning the screw can steplessly adjust the height of the rod, control the flying speed of the drone, and stabilize it at a fixed speed value7. Lightweight and compact, easy to carry8. Silicone base is used, which is soft and does not hurt the remote control9. Product size: 3.4 x 2.2 x 1.2 cm10. Product net weight: 11.4 grams11. Note: only the speed controller will be shipped, nothing else!

Read more less

1. The buoyancy rod can provide buoyancy for the drone, and can easily take off and land on the water surface2. Increase the buoyancy rod of the tripod to effectively increase the height by 60mm to avoid damage to the fuselage and gimbal in an uneven ground environment3. The weight of the tripod + buoyancy rod is only 32 grams, which will hardly increase the flight burden4. It is fixed with a nylon cable tie buckle, easy to disassemble and reusable5. Install the buoyancy stick only to take off and land on the calm water surface, not on the water surface with waves, otherwise there will be a danger of overturning6. Product size: 24 x 5 x 8 cm7. Product weight: 32 grams8. Note: Due to the large volume of the floating tripod, it will increase the overall wind area of the aircraft after installation, so it is not suitable for flying at high altitudes or in windy environments!Packing list:-Tripod x 2-Buoyancy Rod x 2-Wire tie x 8

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and flexibility. 2. High hardness. This tempered glass film has high hardness, so it can effectively and continuously prevent it from being scratched or broken. If it breaks, the tempered glass will break into small sharp pieces, making the user safer. 3. High definition. This film has high light transmittance. This film has high light transmittance and low light reflectivity, which can give you HD lens as usual. 4. Function. The lens protector fits your device very well and makes a big difference in protecting it from scratches, fingerprints, water, oil, dust, shock, slipping, etc. When stained with water, soil, mud, oil or other accessories, it can be easily cleaned. 5. Durable. With good performance and high quality, it can work for a long time. Installation Notes 1. Before installation, please clean the lens with alcohol swab and microfiber cloth. 2. Peel off the protective layer from the adhesive side. 3. Carefully point the glass at the lens. 4. Press down on the center of the glass and the glued part will spread smoothly on all parts. Precautions 1. Since this is a glass product, please note that the edges of the glass are easily damaged areas. 2. When it is removed for reuse, its adhesive properties may be worn to a certain extent, so that the protection film cannot adhere to the device. It is not recommended to wake the glass protector after applying it. 3. Installing or removing the lens protector with excessive force may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.

Read more less

1. Support almost all smartphones (for iPhone 4)2. Support 7.9 inch, 9.7 inch, 10.5 inch tablet PC3. 360 degree rotation, does not affect the use of the lanyard4. Adjustable length, 115mm-186mm adjustable5. Will not block the USB port, will not block the screen of the controller, will not block the data port of the smartphone6. Foldable, easy to carry and store7. Material: plastic8. Suitable for DJI Spark / DJI Mavic Pro / Air remote controlNote: The product is only the bracket, no others are included

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Air 25. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: plastic8. Weight: 5g

Read more less

1. The real machine mould, precise matching2. Installation is simple and easy to use3. The environmental protection material, using at ease4. For DJI Mavic 35. Repair accessories for replacement of accidental damage6. Long Life and easy installation7. Material: metal8. Weight: 20g

Read more less

About The Product1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Package List1. Tempered Glass Film x 1 2. Adhesive x 1 3. Wet & Dry Wipes x 1

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Mini MR1SS5 / Mini SE 5. Repair accessories for replacement of accidental damage6. Long life and easy installation

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use it

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use it

Read more less

1. Imported removable PVC sticker, repeated pasting without leaving glue2. Outdoor ink, waterproof, dirt-proof, scratch-proof and sun-proof3. Easy to stick and tear without leaving glue, with air guide groove, easy to handle air bubbles4. Precise cutting, precise fitting, no shrinkage or warping5. Delivery list: 1 (body + arm) sticker + 1 remote control sticker + 1 pack of installation kit + 1 manualNote: -The product only has stickers and does not contain other items-The protective function means that the area covered by the sticker does not mean that the whole machine can be waterproof and scratch-proof

Read more less

1. Made of soft silicone material to prevent foreign objects from colliding or scratching the body2. Reinforced surface design, can be kneaded at will without deformation3. The surface is sprayed with oil, which is beautiful and generous, and feels comfortable4. Easy to remove and install5. Real machine mold opening, reasonable hole design, does not affect the use and flight remote control6. Soft touch, anti-slip texture design, anti-slip and anti-sweat, enhance the flight override experience7. Applicable models: suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 / Mini 3 / 3 Pro8. Note: The product only includes a protective case, nothing else9. Material: silicone10. Size: 9.9x15.5x3.5cm11. Net weight: 50.7g12. Gross weight: 55.4gInstallation steps:1. Take off the joystick of the remote control, and put the protective cover on the remote control2. Slightly organize and fit the fuselage3. Install the joystick and use it

Read more less

1. Fix the propeller on the fuselage to prevent damage to the propeller during storage2. Environmentally friendly materials, will not scratch the fuselage and propeller3. Small size, easy to store, can be kneaded at will, without deformation4. Simple design, quick installation and removal5. Quick disassembly and assembly, effective storage of propellers6. The thickened base design of the oars restrainer effectively protects the fuselage from wear and tear7. Fixed buckle design, easy to install and remove8. Fit the body, effective protection9. Applicable models: suitable for Mavic Mini / Mini 2 / Mini SE10. Note: The product only includes the propeller, nothing else11. Main material: TPU12. Size: 7x6x6.1cm13. Net weight: 23.9g14. Gross weight: 36.9g

Read more less

1. Fix the propeller on the fuselage to prevent damage to the propeller during storage2. Environmentally friendly materials, will not scratch the fuselage and propeller3. Small size, easy to store, can be kneaded at will, without deformation4. Simple design, quick installation and removal5. Quick disassembly and assembly, effective storage of propellers6. The thickened base design of the oars restrainer effectively protects the fuselage from wear and tear7. Fixed buckle design, easy to install and remove8. Fit the body, effective protection9. Applicable models: suitable for Mavic Mini / Mini 2 / Mini SE10. Note: The product only includes the propeller, nothing else11. Main material: TPU12. Size: 7x6x6.1cm13. Net weight: 23.9g14. Gross weight: 36.9g

Read more less

1. Output: DC 17.6V/12A (each 17.6V/4A)2. Input: 100-240V 50/60Hz3. USB output: DC5V/3A (branch 1.5A)4. With safety switch, energy saving and environmental protection5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger6. 4A current, more stable charging7. It takes about 90 minutes to fully charge 3 batteries8. Covered plug, can prevent short circuit and dust9. Smart chip and control, stable charging without damaging the battery10. Product size: 15.9x10.9x3.6 cm11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams

Read more less

1. Output: DC 17.6V/12A (each 17.6V/4A)2. Input: 100-240V 50/60Hz3. USB output: DC5V/3A (branch 1.5A)4. With safety switch, energy saving and environmental protection5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger6. 4A current, more stable charging7. It takes about 90 minutes to fully charge 3 batteries8. Covered plug, can prevent short circuit and dust9. Smart chip and control, stable charging without damaging the battery10. Product size: 15.9x10.9x3.6 cm11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams

Read more less

1. Output: DC 17.6V/12A (each 17.6V/4A)2. Input: 100-240V 50/60Hz3. USB output: DC5V/3A (branch 1.5A)4. With safety switch, energy saving and environmental protection5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger6. 4A current, more stable charging7. It takes about 90 minutes to fully charge 3 batteries8. Covered plug, can prevent short circuit and dust9. Smart chip and control, stable charging without damaging the battery10. Product size: 15.9x10.9x3.6 cm11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams

Read more less

1. Output: DC 17.6V/12A (each 17.6V/4A)2. Input: 100-240V 50/60Hz3. USB output: DC5V/3A (branch 1.5A)4. With safety switch, energy saving and environmental protection5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger6. 4A current, more stable charging7. It takes about 90 minutes to fully charge 3 batteries8. Covered plug, can prevent short circuit and dust9. Smart chip and control, stable charging without damaging the battery10. Product size: 15.9x10.9x3.6 cm11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams

Read more less

1. Isolation paddle, anti-collision and anti-injury, prevent the rotating paddle from scratching people or objects during the flight operation, reduce the risk of accidents and effectively protect the paddle2. Using high toughness material, effective cushioning impact force, reduce damage3. Precise matching, comprehensive protection4. Two-part interlocking assembly, can be separated and stored, easy to carry, snap installation, simple to use5. Material: PPO6. Applicable models: for DJI Mavic 3/Mavic 3 Cine/Mavic 3 Classic7. Size after installation: about 64 x 55.5 x 10cm

Read more less

1. 5.5-inch 1080p high brightness display, still clearly visible in direct sunlight2. OcuSync 2.0 high-definition map system, with 5.8GHz and 2.4GHz two communication bands, the system can automatically select and switch between the 2.4GHz and 5.8GHz dual bands according to the different environmental interference, effectively reducing the impact of environmental interference on flight control and image quality, the map distance up to 8 km3. Built-in microphone, speaker, can play 4K/60fps H.264 and 4K/60fps H.265 video material, also supports output through HDMI interface4. After downloading the pictures and video footage taken by the aircraft to the local remote control, you can use the Go Share function in DJIGO 4 to wirelessly transfer the downloaded footage to mobile devices, so it is efficient and convenient to share the footage5. High reliability design, stable operation in cold temperatures and hot environments6. Turn on the power can be quickly connected to the aircraft, no need to wait for installation, immediately enter the shooting state7. Integrated design combined with the detachable remote pole, more convenient to carry out8. Support the installation of other APP, to achieve more image editing and sharing functions9. Battery capacity: 5000mAh, support fast charging10. Use time: up to 2.5h11. Applicable models: For DJI Mavic 2 Pro, Zoom, Air 2, Air 2S, Mini 212. Note: this remote control is not all new

Read more less

1. Material: ABS2. One-piece molding, higher firmness3. Silicone lining, non-slip and stable, without damaging the remote control4. Height and angle can be adjusted freely, easy to use5. Opening and closing 190 mm (MAX), 4-12 inches mobile phone and tablet PC can be used6. Weight: 185 grams7. Note: only the stand, not including the remote control and tablet

Read more less

1. When riding in the field, you can attach the DJI RC remote control to the handlebars and control the remote control while riding.2. CNC machined aluminium remote control bracket, high strength and hardness, durable and more secure3. without the aluminium remote control mount, it can also be used as a separate sports camera clip to hold cameras for ACTION 2/GoPro series/Insta360 series4. Screw locking, stable installation, tightly clamping the remote control is not easy to loose, peace of mind riding and shooting5. Free angle adjustment6. Double-headed rotatable metal quick release firmware, quick and easy to install7. Suitable for bicycles, scooters, electric vehicles, etc.8. Built-in anti-slip cushion for a more secure grip and effective protection against scratches on handlebars9. Applicable models: Suitable for Mini 3/Mini 3 Pro/ Mavic 310. Applicable tube diameter: 22-26mm11. Note: the product only includes the bracket, no other12. Material: aluminium alloy + plastic13. Gross weight: 159g

Read more less