Live Equipment

1. This machine realizes the function of wireless microphone through the principle of FM radio transmission and reception. That is to use the "transmitter" as a transmitting station to transmit a frequency point, and use the "speaker" as a receiver to receive the frequency point sent by the transmitter, so that the function of wireless shouting can be realized.2. This machine has a built-in rechargeable lithium battery, which can be adapted to various mobile phone charging heads for charging.3. The red light is always on when the transmitter is charging, and the red light is off when it is fully charged.4. Input: DC5.0V, 1A5. Channel: 3Operating procedures:1. Connect the plug of the wired microphone to the transmitter together2. Turn on both the transmitter and amplifier3. Press the M button of the loudspeaker to enter the radio mode (the FM letter appears on the display), and then press the next button for 3 seconds to start searching.4. When the radio station is searched, click the button to see the display screen and find one of the three frequency points of 76.1/100.0/107.9, then you can call wirelessly

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

Features1. Reduces Noise Interference: The noise isolation stand has three layers that work in tandem to reduce noise while recording. It particularly relies on reflectors with a triangular high density thickened sponge insulator material which reduces the propagation of interference sound waves and creates good recording conditions that result in sublime recordings. 2. Flexibility And Convenience: There is lots of flexibility working with the microphone isolation shield with a stand as you can choose to use the 3-panel design foldable end panels. It is easy to adjust the arch design, enables angle adjustments for optimal sound insulation and meets the recording needs of the environment hence ensures only the high quality recordings. 3. Super Noise Reduction Design: This one is designed to block all sound interpretations with its compact design.It is a full package design, with a foldable top to efficiently cancel out noise interference from the environment for a noiseless,multi-layer noise cancellation structure. It reduces noise on the back and side to ensure cleaner and clearer recordings.The reflection area and the absorption area reduce noise generated by the external environments. 4. Easy to Use: The microphone isolation cover is designed for easy usage as it can be disassembled separately and installed according to the recording environment.You can fox it on a desktop or microphone stand. It is suitable for use with multiple stands making it suitable for your current needs.You can adjust the height of the recording shield to fit the preferences of the personal preferences. This one are suitable for professional or vocal recordings and podcast recording studios. 5. High-quality Material: Constructed from high-quality material for sturdiness and long-lasting performance. They can be used with multiple stands or microphones, you can use them on a flat surface and can be fitted on countertops and desktops. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Foldable body, compact and portable. 2. AR sensor type, power high-density motor, anti-vibration sensor, effectively slow down the shooting shake. 3. Detachable Bluetooth remote control for remote control. 4. Invisible tripod, convenient for live broadcast, selfie and video. 5. Parameters: - Material: aluminum alloy + ABS - Bluetooth version: JL+5.0, distance: 10M - Charging current: 0.45MA - Gimbal battery: 450MAH, duration: 2H (stabilizer) - Telescopic rod: 190CM-750CM - Handle bracket: handle triangle support - Support clip: 65-90MM - Support system: Android 4.3/iOS 5.1

Read more less

1. Suitable for microhones: The microhone windshield is suitable for most USB microhones, condenser microhones with a jacket diameter between 40-70mm. Comes with a holder for different size microhones. 2. Noise-Canceling: Professional o filter efficiently reduce the losive, wind interference, saliva sraying and reserve you a rofessional clean voice and bright clear recording. 3. 5-sided Noise Reduction + 1-side Double Layered Filters: microhone foam screen o filter adots a 5-sided seal design to effectively reduce noise in different directions. The oening 1-side Double Layered Screen Pop Filters can revent the divergent sound from during the recording rocess, the recetion is more secific, and the recording is clearer and true and rotect your microhone from the corrosion of saliva. 4. Light and Convenient: Mic O-type filters have good noise reduction and acoustic noise reduction strength, it is not only suitable for ersonal live recording but also for rofessional recording studio, radio studio, outdoor erformance, etc. 5. Wide alication: Light ortable design, easy installation; It can be easily mounted on various desktos stand, small triods, cantilever arms and floor stands. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Durable Material: Using metal tube, strong and durable, strong bearing capacity 2. Height Adjustable: This mic stand is made of metal tubing with tripod stand base, which makes it extremely sturdy and super stable. The height of the microphone stand is adjustable, and the height range is from 50 to 187cm. 3. Portable Design: The detachable design makes the stand space-saving and more portable. It is easy to carry and install which provides great convenience for various types of activities like the stage, studio, concerts, outdoor performances, and more. 4. With hard and solid iron of this tripod, it is proved to be reinforced, stable and durable. It is a heavy-duty type with skid resistance characteristic. The height of the tripod is adjustable. 5. The tripod base can provide better stability and therefore wona??t cause any burdens even if you place much heavier microphone and mic isolation shield above it. The angle of tripod can be adjusted through the knob.

Read more less

Features1. 24 bit/192 kHz Professional Audio Quality: E22 audio interface, with all connection interfaces for microphone, electric guitar, bass, etc. This includes a +48 volt phantom power supply for condenser microphones,delivers studio-grade 24-bit/192 kHz audio resolution for pristine recording every time.Whether you are a singer, songwriter, producer on the go, or need to accompany during recording, the ultra-reliable E22 audio interface will help you shine in the digital field 2. Simple, Plug and Play: XTUGA E22 USB audio interface for Windows or Mac driver use generic Windows driver. No proprietary driver to download.It has left and right channel input, can be connected to microphones and instruments at the same time for music production, and can be played on the computer at the same time.So you can be going in your home project studio just a few minutes. 3. Compatible with Popular Recording Software: Whether you are a Podcaster or Beat Maker, it will not disappoint. It can ideal match Pro Tools/Ableton Live Lite/Reaper/Ableton and Other DAW Recording Software.NO DAW Software included which means you have flexible choice for you music production. 4. Ideal For Beats: The E22 sound card is small and easy to carry, so you can prepare for various recording and production scenes even on the go. In touring performances, at home, on stage or in rehearsal venues, the E22 sound card provides you with new freedom in recording, editing and mixing, aany audio you record is at studio quality, meaning you will not have to go to a studio to re-record it later. 5. Power Selector: E22 Sound card has diversified power supply. When connected to the tablet, it provides a 5V DC port for power supply. You can insert a standard USB power adapter or an external USB battery to ensure power stability.Specifications1. Connector: Audio Sound Card Adapter 2. Application: Audio equipment, 2 in 2 out 3. Material: Metal+ABS 4. Features: Portable 5. Application: Computer and mobile phone 6. Function: Studio recording 7. Resolution: 192Khz-24Bit

Read more less

1. Using iFLYTEK AI chip algorithm, true 360-degree face recognition and automatic tracking. 2. The mobile phone stand can be used for 360-degree horizontal and vertical shooting, and 180-degree front and rear shooting to meet different shooting needs. 3. Built-in AI strong core to accurately recognize gestures. 4. It can be used after turning on the phone, no need to connect Bluetooth and download APP, which is convenient and fast. 5. Parameters: - Material: ABS - Best distance: 1-3M - Charging interface: USB-Type-C - Charging current: DC5V/1A - Battery capacity: 1200MAH - Tracking mode: face recognition - Support clip: 40-80MM - Gesture operation: ok gesture: start, palm: pause - Working hours: 5H (stabilizer)

Read more less

1. Flexible and easy to carry. 2. Made of aviation nano-alloy, strong load-bearing, sturdy and durable. 3. The detachable gimbal is also a camera stand. 4. 1.8 meters super wide angle, shooting is no longer restricted. 5. The 360-degree rotating head is smooth and smooth, and it is easy to take a panoramic view. 6. Parameters: - Stretch length: 29.5cm-1.8m - Voltage: 4.2V - Battery capacity: 55mAh - Bluetooth version: 5.2

Read more less

1. The angle can be adjusted at will to meet different angle requirements. 2. The triangular desktop bracket design occupies a small area. 3. The ring fill light has three adjustable light colors, warm light/warm white light/cool white light 4. The fill light uses 120 pieces of 12W 90Ra high-resolution LED beads, which are bright and not dazzling. 5. The 360-degree rotating head can be adjusted in all directions up, down, left, and right. 6. Multiple cooling grooves are designed on the back, which can dissipate heat quickly and prolong the service life.

Read more less

1. Material: aluminum alloy + ABS plastic2. Adaptable system: Android, IOS3. Remote control power supply: button cell battery included4. Applicable cell phone size: 3-7 inch5. Clamping distance: up to 86mm6. Length: 29-160cm adjustableFeatures:1. The vice-grip design can be balanced according to the weight of the phone and the verticality of the counterweight bar.2. Head balancing handle, the picture will not shake.3. 9-stage telescopic, height adjustable, wider viewfinder.4. Universal rotating head, flexible angle, each joint can be turned, full coverage of the angle5. Duplicate three-legged support, with silicone anti-slip pads, three-axis mechanics, stable and not shaky6. Increase the chassis force area, increase the moment of physics to enhance the stability of the landing solid, not shaking, stronger load bearing7. Circular multi-function remote control, Bluetooth connection, easy to realize 10 meters remote selfie, embedded design is not easy to lose8. One-piece design, smaller volume, storage does not take up space, easy to carry9. Standard 1/4 interface, adaptable to cameras, fill light, expansion bracket and other equipment10. The cell phone clip contains silicone anti-slip pads to prevent the phone from slipping, will not scratch the phone

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

1. Oscillation mode: PLL Synthesized 2. Frequency range: 572-603MHz 3. Preset channel: 40 channels separately set 4 groups 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB 7. Receiving range: More than 250FT 8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB 9. LCD Display shows clear working status 10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack 11. Power supply: 2 x AA batteries (not included) 12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

1. Material: aluminum alloy2. Function: live broadcast, recording, singing, sound card, charging3. Interface: Type-C + double 3.5mm4. Control: Support adjusting the volume of earphones and monitoring5. Performance: Support live streaming and charging at the same time6. Charging: Support 5V/2.4A and 20V/3A7. Compatible: devices supporting 8 Pin and Type-C interface8. Sound effect: stereo9. Compatible with most live streaming apps on the market10. Hi-Res lossless sound quality, equipped with digital audio decoding chip, audio sampling rate up to 21Bit/384KHz11. Product size: 68.6 x 48 x 10.5mm12. Net weight: 40 gramsPacking list:-Converter x 1-Audio cable x 1-Type-C/USB-C to Type-C/USB-C x 1-Type-C/USB-C to 8 Pin x 1

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less