Aquarium Supplies

1. Beautiful shape, can decorate the fish tank, home, office desk, etc.2. Resin material, environmental protection and durable, easy to clean3. Surface flocking, realistic modeling, fast scenery4. Non-toxic and harmless, soak in water does not lose color and discoloration, can be used without worry5. Can be used as a pet sunbed, feeding, sports breathing, when the use of hiding places6. Dimensions: ZR647: about 14 x 9.5 x 9.5cm, ZR7661: about 14.5 x 11 x 8cm, ZR7662: about 14.5 x 11 x 8cm, FGT48: about 23 x 13 x 11cm, GT46: about 10.5 x 13.5 x 9cm, GT47: about 13 x 11 x 9.5cm7. Weight: ZR647: about 187g, ZR7661: about 254.5g, ZR7662: about 172.5g, FGT48: about 416.5g, GT46: about 303g, GT47: about 76.5g

Read more less

1. Waterproof, solid adsorption, not easy to fall off2. Separate automatically float on the water surface, not sink the bottom of the tank without salvaging3. Non-slip grip, streamlined shape, comfortable grip, non-slip, free sliding cleaning more comfortable4. Double-sided fiber fleece, cleaning does not hurt the glass, inside and outside the wall while cleaning5. Algae scraper can be replaced and disassembled6. Applicable fish tank size: 8424: 20-60cm, 8425: 60-120cm, 8426: 80-200cm7. Applicable glass thickness: 8424: 3-5mm, 8425: 6-15mm, 8426 normal version: 8-18mm, 8426 enhanced version: 10-25mm8. Size: 8424: about 7.5 x 4.5 x 3.5cm, 8425: about 10 x 4.5 x 6cm, 8426: about 11.5 x 5 x 6.5cm9. Weight: 8424: about 150g, 8425: about 280g, 8426: about 360gAlgae scraper installation method:1. The two holes on the blade and the fixed frame raised dots aligned downward pressure (Note: carbon fiber blade installation must be the blade oblique cut downward, can not be installed in reverse, or affect the effect)2. Will be fixed on the outer card sleeve to push forward, hear the "click" sound before firm3. Magnetic brush buckle head aligned with the knife head of the bayonet buckle on and then break up, breaking is not installed4. Use the open mode of attention: due to the large suction, open the two brush surface rotate to 90 degrees and then break, do not get too close after separation, to avoid pinching fingersCaution:1. Do not wear a pacemaker near2. Place out of reach of children3. Acrylic plastic crystal and super white fish tank, please do not use this product

Read more less

1. Beautiful modeling, can be used to decorate fish tanks, desks2. Resin material, environmental protection and durable, easy to clean3. Realistic modeling, fast scenery4. Non-toxic and harmless, soak in water does not lose color, can be used without worry5. Can be used as a pet sunbed, feeding, exercise breathing, when hiding cave use6. Size: GT026: about 23.5 x 17.5 x 9cm, GT023: about 16 x 14 x 2cm, GT149: about 10.5 x 18 x 9.5cm, GT001: about 15 x 8 x 7.5cm, GT013S:: about 14 x 8.5 x 6.5cm, GT013M: about 17 x 10 x 8cm7. Weight: GT026: about 530g, GT023: about 493g, GT149: about 313.5g, GT001: about 147.5g, GT013S: about 142.5g, GT013M: about 230g

Read more less

1. Beautiful modeling, can be used to decorate fish tanks, desks2. Resin material, environmental protection and durable, easy to clean3. Realistic modeling, fast scenery4. Non-toxic and harmless, soak in water does not lose color, can be used without worry5. Can be used as a pet sunbed, feeding, exercise breathing, when hiding cave use6. Size: GT026: about 23.5 x 17.5 x 9cm, GT023: about 16 x 14 x 2cm, GT149: about 10.5 x 18 x 9.5cm, GT001: about 15 x 8 x 7.5cm, GT013S:: about 14 x 8.5 x 6.5cm, GT013M: about 17 x 10 x 8cm7. Weight: GT026: about 530g, GT023: about 493g, GT149: about 313.5g, GT001: about 147.5g, GT013S: about 142.5g, GT013M: about 230g

Read more less

1. Three kinds of time (8/12/24h) interval adjustable2. Two installation methods, simple and easy to operate. covered aquarium: directly placed in the feeding port of the closed aquarium; uncovered aquarium: bracket fixed on the wall of the aquarium, the height of the main body can be adjusted up/down/rotated3. With freshness/desiccant box design, effectively ensure the freshness of the feed, easy to disassemble and replace.4. 400ml/180g large capacity food compartment, suitable for 1-4mm pellets5. Discharge spout size can be adjusted6. Power supply: 2 AA batteries (not included)7. Size: about 15 x 8cm8. Weight: about 330g

Read more less

1. Material: acrylic2. Thickness: 4mm3. Durable, not easy to break, can be used for a long time4. Suitable as aquarium lid handle, fish tank lid handle or handle replacement, also can be used as cabinet drawer and other furniture knobs5. Equipped with double-sided tape, easy to install

Read more less

1. Material: ABS2. The pipe clamp makes cleaning or changing water in the water tank easier3. Clamp the hose firmly to ensure it does not slip4. Can be fixed on the edge of a bucket or fish tank5. Movable chuck design, can clamp water pipes with diameters of 8 to 166. Size: 9.7x5.3cm7. Weight: about 10 grams

Read more less

1. Material: ABS2. The pipe clamp makes cleaning or changing water in the water tank easier3. Clamp the hose firmly to ensure it does not slip4. Can be fixed on the edge of a bucket or fish tank5. Movable chuck design, can clamp water pipes with diameters of 8 to 166. Size: 9.7x5.3cm7. Weight: about 10 grams

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 5W2. Power interface: USB3. Light bead color: blue-white light4. Color temperature: 8000-10000K5. Suitable for fish tanks: 10-30 cm fish tanks6. Size: lamp disk diameter of about 5 cm, lamp length of about 12 cm, cable length of about 130 cmFeatures:1. The light is close to the natural color, 360 degrees free adjustment, rapid heat dissipation, energy saving, eye protection without flicker2. Rotating aquarium lamp, light color uniformity, 360-degree free rotation of the lamp without dead angle, adjust the irradiation angle at will3. Lightweight and compact design, simple and practical, independent power switch design, easy to use, safe and splash-proof4. Good light does not strobe, soft light more eye protection, stable light, eye and fish protection, to avoid causing discomfort to fish and viewers5. High brightness LED lamp beads, restore natural colors, simulate the natural daylight spectrum, high clarity and brightness, zero distance and fish interaction

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 5W2. Power interface: USB3. Light bead color: blue-white light4. Color temperature: 8000-10000K5. Suitable for fish tanks: 10-30 cm fish tanks6. Size: lamp disk diameter of about 5 cm, lamp length of about 12 cm, cable length of about 130 cmFeatures:1. The light is close to the natural color, 360 degrees free adjustment, rapid heat dissipation, energy saving, eye protection without flicker2. Rotating aquarium lamp, light color uniformity, 360-degree free rotation of the lamp without dead angle, adjust the irradiation angle at will3. Lightweight and compact design, simple and practical, independent power switch design, easy to use, safe and splash-proof4. Good light does not strobe, soft light more eye protection, stable light, eye and fish protection, to avoid causing discomfort to fish and viewers5. High brightness LED lamp beads, restore natural colors, simulate the natural daylight spectrum, high clarity and brightness, zero distance and fish interaction

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less