Arduino & SCM Supplies

Features:1. The LC29H series can track L1+L5 dual-frequency and multi-GNSS signals, reducing multipath effects in urban canyons and improving positioning accuracy while maintaining low power consumption.2. Built-in LNA and SAW filters to achieve high sensitivity and strong anti-interference ability.3. Use dual-frequency positioning and RTK technology to meet centimeter-level high-precision positioning requirements.4. Suitable for real-time tracking systems and sharing economy applications, helping to develop applications such as drones, smart agricultural machinery, and shared two-wheelers.5. Standard Raspberry Pi 40PIN GPIO expansion header, supports Raspberry Pi series boards and Jetson Nano6. Supports simultaneous tracking of L1+L5 dual-frequency satellite signals, reducing the multipath effect in urban canyons and improving positioning accuracy.7. Supports concurrent reception of multiple GNSS systems (GPS, BDS, GLONASS, Galileo and QZSS) while maintaining low power consumption8. Built-in low-noise amplifier and acoustic surface filter to achieve -165dBm high sensitivity and enhanced anti-interference performance9. Supports multi-frequency active interference cancellation, effectively suppressing or eliminating narrowband signal (WiFi/2/3/4/5G) interference to ensure navigation accuracy10. A-GNSS (Assisted GNSS) support, reducing the cold start time to first fix (TTFF) at power-on to 5 seconds11. Support QGNSS software to facilitate setting various module functions12. Onboard battery holder, supports ML1220 rechargeable battery, used to save ephemeris information and hot start13. There are 4 LED indicators on the board to indicate the working status of the module.14. LC29H(AA) GPS HAT has the following features:-Support positioning enhancement systems (WAAS, EGNOS, MSAS and GAGAN) to improve positioning performance in service areas-Supports EASY technology to use stored ephemeris, almanac data and other information for positioning when there is no signal, improving positioning and first positioning time15. LC29H(DA) GPS/RTK HAT has the following features:-Supports fast convergence dual-frequency RTK centimeter-level positioning, suitable for high-precision positioning of terminal equipment16. LC29H(BS) GPS/RTK HAT has the following features:-Supports GNSS original observation and correction data output, suitable for establishing RTK base stationsProduct parameters:1. Frequency bandGPS/QZSS: L1C/A, L5Beidou system: B1I, B2aGalileo: E1, E5aGLONASS: L12. Number of concurrent GNSSGPS/QZSS+Beidou+Galileo+GLONASS3. SensitivityTracking navigation: -165dBmReacquisition: -159dBm, -157dBm, -159dBmCold start: -147dBm, -145dBm, -147dBm4. Dynamic performanceAcceleration (maximum): 4gAltitude (maximum): 10000mSpeed (maximum): 500m/s5. Communication interfaceUART (9600~3000000bps, default 115200bps), I2C (maximum 400KHz)6. Protocol: NMEA 0183 V4.10, RTCM 3.x7. Power supply: 5V8. Total current: less than 40mA@5V (continuous mode)9. Operating temperature: -40 to 85 degrees Celsius10. Product size: 65 x 30.5mm11. Weight: 126gPacking list:-LC29H GPS hat x 1-2x20PIN female socket x 1-GPS external antenna (D) x 1-IPEX 1 to SMA cable 17cm x 1-Screw pack x1Specification: Package Weight One Package Weight 0.19kgs / 0.41lb One Package Size 15cm * 10cm * 4cm / 5.91inch * 3.94inch * 1.57inch Qty per Carton 48 Carton Weight 9.74kgs / 21.47lb Carton Size 32cm * 32cm * 34cm / 12.6inch * 12.6inch * 13.39inch Loading Container 20GP: 765 cartons * 48 pcs = 36720 pcs 40HQ: 1778 cartons * 48 pcs = 85344 pcs

Read more less

This board can be used with Arduino /Raspberry Pi boardModule itself can adapt 3.3V and 5V systems without level conversion.Features1. Within -40 degree C to +85 degree C temperature range, timing accuracy is maintained at +/- 5ppm (+/- 0.432 sec / day).2. Provide battery backup for continuous timing.3. Low-power.4. Device package and function compatible with the DS3231.5. Complete clock functions include seconds, minutes, hours, day, date, month and year timing, and provide valid to 2100.6. Two calendar alarm.7. 1Hz and 32.768kHz output.8. Reset button and button input.9. High-speed (400kHz) I2C serial bus.10. +2.3 V to +5.5 V supply voltage.11. +/-3 degree C accuracy digital temperature sensor.12. -40 degree C to +85 degree C operating temperature range.13. 16-pin SO (300mil) packageSpecification1. Brand: Landa tianrui2. Model: LDTR-WG02113. Quantity: 1 piece4. Color: Black5. Material: PCB6. Chipset: DS32317. Dimensions: 2.2 cm x 1.2 cm x 0.5 cm8. Weight: 5g9. Package List: 1 x DS3231 Clock ModuleSpecification: Package Weight One Package Weight 0.02kgs / 0.03lb One Package Size 5cm * 3cm * 1cm / 1.97inch * 1.18inch * 0.39inch Qty per Carton 6240 Carton Weight 15.00kgs / 33.07lb Carton Size 60cm * 39cm * 40cm / 23.62inch * 15.35inch * 15.75inch Loading Container 20GP: 284 cartons * 6240 pcs = 1772160 pcs 40HQ: 661 cartons * 6240 pcs = 4124640 pcs

Read more less

1. Concealed card holder, zero protrusion, integrated with Raspberry Pi development board, beautiful and convenient for experiment. 2. Let the Raspberry Pi development board have more extra storage space. 3. Secure backup, do not worry about data loss. 4. Read and write speed is fast. Specification: 1. Concealed. 2. Is the metal border: No. 3. Size: 24x16mm. 4. Applicable objects: Strawberry pie development board or other equipment (computer) with suitable SD card slot size. Please note: This ferrule is only suitable for devices that use the SD card slot connector, not for the TF card slot connector.Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 9cm * 6cm * 1.3cm / 3.54inch * 2.36inch * 0.51inch Qty per Carton 500 Carton Weight 13.50kgs / 29.76lb Carton Size 42cm * 32cm * 47cm / 16.54inch * 12.6inch * 18.5inch Loading Container 20GP: 422 cartons * 500 pcs = 211000 pcs 40HQ: 980 cartons * 500 pcs = 490000 pcs

Read more less

1. 5MP night vision camera with 2 PCS IR sensor lights, support infrared night vision function. 2. Support 1080P resolution. 3. Focal adjustable, focal length: 3.6mm. 4. With 4 screw holes: The screw hole on the camera is used to both fix the infrared lights and though the power for the lights. You can use a small screwdriver to install the lights easily. 5. Support 3.3V power output.Specification: General Model C0285 Weight 19g Resolution 1080p Sensor OV5647 Camera 5MP CCD Size 1/4inch Aperture (F) 1.8 Focal Length 3.6mm adjustable Package Include Package Contents 1 x Camera Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 11.5cm * 6.6cm * 3.5cm / 4.53inch * 2.6inch * 1.38inch Qty per Carton 100 Carton Weight 4.30kgs / 9.48lb Carton Size 37cm * 25cm * 35cm / 14.57inch * 9.84inch * 13.78inch Loading Container 20GP: 823 cartons * 100 pcs = 82300 pcs 40HQ: 1912 cartons * 100 pcs = 191200 pcs

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan. 5. The cooling fan helps to exhaust the hot air from inside the device case. Improve air flow in your system. Cool down the entire case. Extend your system life span and make the device work better.Specification: General Model C0363 Material Plastic, Acrylic Size 10x6.8x3.7cm Weight 70g Rated Voltage DC 5V (Fan) Current 0.2A (Fan) Package Include Package Contents 1 x Cooling Fan 1 x Screws Parts 1 x Acrylic case Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 10.5cm * 7.5cm * 3.5cm / 4.13inch * 2.95inch * 1.38inch Qty per Carton 100 Carton Weight 8.20kgs / 18.08lb Carton Size 40cm * 23cm * 37cm / 15.75inch * 9.06inch * 14.57inch Loading Container 20GP: 783 cartons * 100 pcs = 78300 pcs 40HQ: 1818 cartons * 100 pcs = 181800 pcs

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. Made of ABS material. 3. Has different ports and button position design. 4. It have many ventilation ports in side and covering, good heat dispersion. 5. Special design to install a cooling fan (Not included).Specification: General Model C0665 Material ABS Package Include Package Contents 1 x Protective Case Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 60 Carton Weight 1.98kgs / 4.37lb Carton Size 42cm * 22cm * 32cm / 16.54inch * 8.66inch * 12.6inch Loading Container 20GP: 901 cartons * 60 pcs = 54060 pcs 40HQ: 2093 cartons * 60 pcs = 125580 pcs

Read more less

1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan (Not included).Specification: General Model C0905 Material Acrylic Size 9.8x6.8x3.4cm Weight 69g Package Include Package Contents 1 x Acrylic case Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 10.5cm * 7.5cm * 3.5cm / 4.13inch * 2.95inch * 1.38inch Qty per Carton 100 Carton Weight 8.00kgs / 17.64lb Carton Size 40cm * 23cm * 37cm / 15.75inch * 9.06inch * 14.57inch Loading Container 20GP: 783 cartons * 100 pcs = 78300 pcs 40HQ: 1818 cartons * 100 pcs = 181800 pcs

Read more less

1. The product is used for Raspberry Pi 3 / 2. 2. It dissipates heat off your Raspberry Pi in high efficiency, improving its performance. 3. The cooling heatsink have special stickers affixed, just tear off the paper, easy to install.Specification: General Material Aluminium Size 14.5x14.5x6mm, 9x9x5mm, 9x9x5mm Weight 3g Package Include Package Contents 3 x Cooling Heatsink Package Weight One Package Weight 0.01kgs / 0.03lb One Package Size 3cm * 2.5cm * 0.7cm / 1.18inch * 0.98inch * 0.28inch Qty per Carton 500 Carton Weight 3.50kgs / 7.72lb Carton Size 17cm * 16cm * 15cm / 6.69inch * 6.3inch * 5.91inch Loading Container 20GP: 6535 cartons * 500 pcs = 3267500 pcs 40HQ: 15172 cartons * 500 pcs = 7586000 pcs

Read more less

1. Type: T Shape GPIO Expansion Board V1 2. T Shape GPIO Expansion Board V1 Works with Raspberry Pi B+ 3. Easy and convenient to useSpecification: General Types T Shape GPIO Expansion Board V1 Size 10*8.0*2.0 cm Weight 95 g Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 200 Carton Weight 21.90kgs / 48.28lb Carton Size 40cm * 50cm * 20cm / 15.75inch * 19.69inch * 7.87inch Loading Container 20GP: 666 cartons * 200 pcs = 133200 pcs 40HQ: 1547 cartons * 200 pcs = 309400 pcs

Read more less