Products

1. For Canon camera E-TL auto flash, Nikon camera TL auto flash 2. Guide number: 60 (105 mm focal length | SO100, in meters) 3. Flash coverage: 18-180mm; manual zoom; automatic zoom (automatically set the flash coverage pattern suitable for the lens focal length and image size) flash head rotation: horizontal 0-270 degrees, up and down -7-90 degrees (bounce flash) 4. Flash duration: 1/200s-1/20000 5. Exposure control system: ETTL auto flash, TTL auto flash, manual flash 6. Manual flash: 8-level light control (1/1.1/2.1/4.1/8.1/16.1/32.1/64.1/128) 7. Synchronization mode: high-speed synchronization (up to 1/8000s), front curtain synchronization, rear curtain synchronization 8. Stroboscopic flash: available (number of times: 40 times; 199Hz) 9. Manual Flash Exposure Bracketing: Adjust in 1/3 gear increments between +/-3 gears (manual flash exposure compensation and flash bracketing can be used in combination) 10. Wireless function: master control unit, slave unit, close 11. Controllable slave unit group: optical 3 groups: A, B, C; 2.4G 3 groups: A, B, C Channel: Optical 4 channels: 1, 2, 3, 4; 2.4G: 16 channels, 1-16 12. Transmission range: optical: indoor 12-15 meters, outdoor 810 meters; 2.4G: 50 meters 13. Autofocus auxiliary light: effective range (approx.) center: 0.6-10 meters 14. Power supply: 11.1V/2000mAh high-rate lithium battery (LE-26B) 15. Recycle time: 0.1-1.5 seconds (power output 1/128-1/1) 16. Number of flashes: 100-1500 times (flash output 1/1-1/128) 17. Energy saving: 60 seconds to go to sleep without operation, no sleep state when set as a slave unit 18. Synchronous trigger mode: hot shoe, 3.5mm sync line, wireless light control S1, S2, wireless hot shoe receiver, built-in 2.4G 19. Color temperature: 5600k+/-100k 20. Net weight (without battery): 410g

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 3. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 4. Support 12EPS high-speed continuous shooting under 1/16 or less brightness 5. Rear-curtain sync and stroboscopic/multi flash control 6. Supports remote wireless trigger function and the wireless trigger distance is as long as 15 meters/49 feet 7. High-speed sync up to 1/8000th of a second 8. Peripheral interface: Hot shoe, PC mount, external charge mount 9. Additional function: PC synchronous, sniff mode and over temperature protectionCompatible withDSLR cameras with standard hot shoe from Canon / Nikon / Pentax / Olympus Such as Canon EOS 5D Mark III , 5D Mark II, 1Ds Mark 6D, 5D, 7D, 60D, 50D, 40D, 30D, 300D, 100D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D/EOS Digital Rebel, SL1, XT, Xti, Xsi, T1i, T2i, T3i, T4i, T5i, XS, T3; Nikon D4S D4 D3S D800 D700 D80 D90 D7000 D7100 D50 D40X D60 D5000 D5100 D5200 D5300 D40 D3000 D3100 D3200 D3300 Not working with Sony / Minolta camerasPackage include1 * TR-950 Speedlite 1 * Soft Case 1 * Mini Stand 1 * User Manual

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. Call back higher rate with an external outlet 3. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 4. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 5. Support 12EPS high-speed continuous shooting under 1/16 or less brightness 6. Rear-curtain sync and stroboscopic/multi flash control 7. Supports remote wireless trigger function and the wireless trigger distance is as long as 15 meters/49 feet 8. Multi-lattice temperature control, battery lamp overheat alarmPackage include1 * TR-960ii Speedlite 1 * Soft Case 1 * Mini Stand 1 * User ManualCompatible withDSLR cameras with standard hot shoe from Canon / Nikon / Pentax / Olympus Such as Canon EOS 5D Mark III , 5D Mark II, 1Ds Mark 6D, 5D, 7D, 60D, 50D, 40D, 30D, 300D, 100D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D/EOS Digital Rebel, SL1, XT, Xti, Xsi, T1i, T2i, T3i, T4i, T5i, XS, T3; Nikon D4S D4 D3S D800 D700 D80 D90 D7000 D7100 D50 D40X D60 D5000 D5100 D5200 D5300 D40 D3000 D3100 D3200 D3300 Not working with Sony / Minolta cameras

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. Call back higher rate with an external outlet 3. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 4. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 5. Support 12EPS high-speed continuous shooting under 1/16 or less brightness 6. Rear-curtain sync and stroboscopic/multi flash control 7. Supports remote wireless trigger function and the wireless trigger distance is as long as 15 meters/49 feet 8. Multi-lattice temperature control, battery lamp overheat alarmCompatible withDSLR cameras with standard hot shoe from Canon / Nikon / Pentax / Olympus Such as Canon EOS 5D Mark III , 5D Mark II, 1Ds Mark 6D, 5D, 7D, 60D, 50D, 40D, 30D, 300D, 100D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D/EOS Digital Rebel, SL1, XT, Xti, Xsi, T1i, T2i, T3i, T4i, T5i, XS, T3; Nikon D4S D4 D3S D800 D700 D80 D90 D7000 D7100 D50 D40X D60 D5000 D5100 D5200 D5300 D40 D3000 D3100 D3200 D3300 Not working with Sony / Minolta camerasPackage include1 * TR-960iii Speedlite 1 * Soft Case 1 * Mini Stand 1 * User Manual

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 3. Remote sensing CELL2 mode for off-camera TTL flash sync 4. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 5. High-speed sync up to 1/8000th of a second 6. TTL auto-metering, the flash automatically adjust light output 7. Rear-curtain sync and stroboscopic/multi flash control 8. Peripheral interface: Hot shoe, PC mount, external charge mount 9. Additional function: PC synchronous, sniff mode, over temperature protection and power-saving modePackage include1 * TR-982ii Speedlite 1 * Soft Case 1 * Mini Stand 1 * User ManualCompatible withCanon Cameras, like EOS 5D Mark III , 5D Mark II, 1Ds Mark [IV / III / II / I ], 1D Mark [III / II N/ II / I] 6D, 5D, 7D, 60D, 50D, 40D, 30D, 700D, 100D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 1100D, 1000D

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 3. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 4. High-speed sync up to 1/8000th of a second 5. TTL auto-metering, the flash automatically adjust light output 6. Rear-curtain sync and stroboscopic/multi flash control 7. Raster AF assist lamp 8. Support red-eye reduction flash mode 9. Color screen for different flash modes, easy to distinguish 10. Additional Functions: Voice prompt, custom function, power save mode, overheating protection, automatic save functionPackage include1 * TR-985 Speedlite 1 * Soft Case 1 * Mini Stand 1 * User ManualCompatible withCanon EOS 700D/T5i 650D/T4i 600D/T3i 1100D/T3 550D/T2i 500D/T1i 100D/SL1 400D/XTi 450D/XSi 300D/Digital Rebel 20D 30D 60D 5D Mark III 5D Mark II and All Other Canon DSLR Cameras

Read more less

About the product1. High performance, high compatibility, high-power flash output 2. 2.9 seconds recycle time with full output, 4-5 seconds without using new battery 3. From 1/128 to 1/1, 8 stalls to lose, each stall have two fine-tuning compensation 4. High-speed sync up to 1/8000th of a second 5. TTL auto-metering, the flash automatically adjust light output 6. Rear-curtain sync and stroboscopic/multi flash control 7. Raster AF assist lamp 8. Support red-eye reduction flash mode 9. Color screen for different flash modes, easy to distinguish 10. Additional Functions: Voice prompt, custom function, power save mode, overheating protection, automatic save functionPackage include1 * TR-985 Speedlite 1 * Soft Case 1 * Mini Stand 1 * User ManualCompatible withCanon EOS 700D/T5i 650D/T4i 600D/T3i 1100D/T3 550D/T2i 500D/T1i 100D/SL1 400D/XTi 450D/XSi 300D/Digital Rebel 20D 30D 60D 5D Mark III 5D Mark II and All Other Canon DSLR Cameras

Read more less

1. Voltage: 15-18V 2. Power: 36+36W 3. Color temperature: 3300K-5600K 4. Net weight: 1100g 5. Type: LED lamp beads 6. Number of lamp beads: 600 7. Dimming range: 10%-100 8. Battery power supply: 2 7.4 VNP750 batteries 9. Power supply: power supply adapter 10. Product size: 350x250x18mm 11. The 13-inch large screen is scientifically arranged, with a large range and sufficient light 12. Support remote wireless remote control 100K color temperature adjustment and brightness, according to the live scene to show sweet/cold wind and other light supplement effects 13. The color of the light is real, natural, with high restoration, and easy post-processing! 14. Equipped with universal metal connector for multi-angle adjustment

Read more less

1. With quick release buckles & hook and loop fastener ensure ultra safe carrying 2. Can be attached to your belt and around your thigh with deluxe non-slip straps to prevent slippage 3. Adjustable leg straps to ensure things stay in their right place while running around in the field 4. Great for CQB work 5. Made of durable nylon materials 6. Size: 24cm(L) x 21cm(W) x 4cm(H) 7. Color: yellowish brown

Read more less

1. With quick release buckles & hook and loop fastener ensure ultra safe carrying 2. Can be attached to your belt and around your thigh with deluxe non-slip straps to prevent slippage 3. Adjustable leg straps to ensure things stay in their right place while running around in the field 4. Great for CQB work 5. Made of durable nylon materials 6. Size: 24cm(L) x 21cm(W) x 4cm(H) 7. Color: yellowish brown

Read more less

1. With quick release buckles & hook and loop fastener ensure ultra safe carrying 2. Can be attached to your belt and around your thigh with deluxe non-slip straps to prevent slippage 3. Adjustable leg straps to ensure things stay in their right place while running around in the field 4. Great for CQB work 5. Made of durable nylon materials 6. Size: 24cm(L) x 21cm(W) x 4cm(H) 7. Color: yellowish brown

Read more less

1. With quick release buckles & hook and loop fastener ensure ultra safe carrying 2. Can be attached to your belt and around your thigh with deluxe non-slip straps to prevent slippage 3. Adjustable leg straps to ensure things stay in their right place while running around in the field 4. Great for CQB work 5. Made of durable nylon materials 6. Size: 24cm(L) x 21cm(W) x 4cm(H) 7. Color: yellowish brown

Read more less

1. Triple filtering: selenium-rich stone layer, collagen layer and negative ion layer, filter large particle impurity and keep skin flexible 2. Pressurized design, massage your skin as well as saving water 3. Detachable shower head, easy to clean 4. Comfortable handle, suitable for children, adult and elder people 5. ABS material, durable in use 6. Size: -Length: 24cm -Panel: 8cm -Interface: 2cm - Universal interface: G1/2

Read more less

1. Adopt stainless steel materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy. The product in the detailed drawing is for reference only, the number of heads is subject to the title

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Adopt stainless steel + ABS materials, durable and portable. 2. 1200ml manual three-head soap dispenser, a single is 400ml. 3. Use with liquid soap, hand sanitizer, shampoo soap. 4. Simple, fashion, convenient and practical. 5. Easy and convenient to install. 6. Anti-corrosion and anti-rust. 7. Press type, easy to use. 8. Good to use at bathrooms, kitchens, office, school, hospital, hotel and restaurant. 9. Tie rod material: Aluminum alloy.

Read more less

1. Color: Black2. Material: Plastic3. Packaging: Carton4. Small size 42cm5. Medium size 50cm6. Large size 60cm

Read more less

1. The fiber optic drop cable patch cord has two connectors in each end of the cable to make connection; pigtail cable is one cable with a connector. The connectors are with SC type, ferrule to be polished as UPC. 2. Optical fiber patch cable is made up by optical communication unit, strengthen pieces and the sheath composition, that is put the optical communication unit in the middle, both sides parallel place two root non-metallic strengthen members or metal strengthening component phosphate steel wire, finally squeeze the black sheath into cable. 3. Special bending resistance of optical fiber, offer more bandwidth and enhance network transmission characteristic, easily realize the broadband, CATV and phone combination of three nets. 4. Cable simple structure, the function is strong. 5. The groove design, easy separating, convenient in, easy installation and maintenance. 6. It is suitable for residential homes, street homes and rural fiber FTTH homes. 7. Interface type: SC 8. Number of cores: single core 9. Mating times: more than 1000 times 10. Insertion loss: greater than 50 11. Return loss: less than 0.30 12. Repeatability: less than 0.10 13. Interchangeability: less than 0.20 14. Transmission distance: 1KM-3KM 15. Bending angle: more than 100 degrees 16. Product material: PVC + phosphating steel wire 17. Cable length: 300m

Read more less

Overview The BG37 handle adapts to the Ronin-S pan/tilt so that the pan/tilt can be used by hand. The built-in battery with a capacity of 2400 mAh can continuously power the pan/tilt for 12 hours. 1. Model: RB1-2400mAh-14.4V 2. Type: 18650 LiPo 3. Capacity: 2400 mAh 4. Energy: 34.56 Wh 5. Size: 10x5x5cm 6. Weight: 200g

Read more less

1. Material: nylon2. Waterproof and moisture-proof3. The zipper is smooth and smooth4. High density, strong and durable5. Sponge inside, thick protection6. The length can be adjusted, suitable for both hand and shoulder7. Application: tripod/monopod/light stand photography equipment storage8. Size: small size 40x11x12cm, large size 50x12x12cm9. Weight: 175g for small size, 225g for large size

Read more less

1. Material: nylon2. Waterproof and moisture-proof3. The zipper is smooth and smooth4. High density, strong and durable5. Sponge inside, thick protection6. The length can be adjusted, suitable for both hand and shoulder7. Application: tripod/monopod/light stand photography equipment storage8. Size: small size 40x11x12cm, large size 50x12x12cm9. Weight: 175g for small size, 225g for large size

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: nylon coating, braided yarn, PBT inner tube2. Purpose: suitable for refitting the oil disc of bicycle tubing with an outer diameter of 5mm3. Features: the material is sturdy and durable, resistant to compression and bending, bright in color, and easy to install. It is recommended to cut with a tubing cutter to ensure that the cut is flat and smooth4. Specifications: outer diameter 5mm, inner diameter 2mm5. Length: 1/3m6. Weight: 1m long about 18.4g/piece, 3m long about 68g/piece

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: aluminum alloy2. Process: CNC, anode coating3. Application: compatible with brakes and shifting systems of bicycles, mountain bikes, road bikes4. Features: lightweight aluminum alloy material, round surface, bright color, convenient and simple installation, wide applicability5. Weight: about 100g/set7. Packing size: about 18x18x1.4cmpacking list:- Aluminum section tube x1.9m- Oil injection inner tube x 6 meters- Aluminum alloy shift cap x6- Aluminum alloy brake cap x6- Rotating line pipe buckle x1- Inner cable O-ring x2- Protective sleeve x2- Repair parts x11 (0.1m)

Read more less

1. Material: stainless steel2. Application: bicycles, mountain bikes, road bikes3. Features: spot welding finishing, smooth threading, good toughness, not easy to break, easy installation, wear-resistant and durable4. Wire diameter: universal front shift line / universal rear shift line is about 1.2mm, front brake cable / rear brake cable is about 1.5mm5. Length: the front brake is about 1.1 meters/piece, the rear brake is about 1.7 meters/piece, the universal front shift line is about 1.55 meters/piece, the universal rear shift line is about 2.1 meters/piece

Read more less

1. Material: stainless steel2. Application: bicycles, mountain bikes, road bikes3. Features: spot welding finishing, smooth threading, good toughness, not easy to break, easy installation, wear-resistant and durable4. Wire diameter: universal front shift line / universal rear shift line is about 1.2mm, front brake cable / rear brake cable is about 1.5mm5. Length: the front brake is about 1.1 meters/piece, the rear brake is about 1.7 meters/piece, the universal front shift line is about 1.55 meters/piece, the universal rear shift line is about 2.1 meters/piece

Read more less

1. Material: stainless steel2. Application: bicycles, mountain bikes, road bikes3. Features: spot welding finishing, smooth threading, good toughness, not easy to break, easy installation, wear-resistant and durable4. Wire diameter: universal front shift line / universal rear shift line is about 1.2mm, front brake cable / rear brake cable is about 1.5mm5. Length: the front brake is about 1.1 meters/piece, the rear brake is about 1.7 meters/piece, the universal front shift line is about 1.55 meters/piece, the universal rear shift line is about 2.1 meters/piece

Read more less