Audio Receiver Transmitters

Features: 1. Using Bluetooth 5.0 chip 2. Support Bluetooth receiving (RX) and Bluetooth transmitting (TX), two functions in one 3. Can read TF card/U disk, support MP3/flac/wav/wam/ape format songs 4. Exclusive mobile phone APP control, up and down song/volume adjustment/sound effect adjustment/switching of playback sound source 5. Support infrared remote control, switch on/off/mute/play/pause/up and down song/volume up/down/sound source switching 6. Support 110-220V power supply in-line, universal 7. Built-in QC2.0 fast charge module, support 2.1A dual USB fast charge, easy charging for mobile phones, tablets, etc. 8. AUX+RAC dual interface output, can connect 2 speakers and other equipment at the same time 9. Bluetooth transmission distance is 10 meters, built-in high-definition decoding chip 10. Weight: 65g 11. Size: 57x50x20mm 12. Launch mode: suitable for original Apple AirPods headsets (basically not supported by the market models)

Read more less

1. Bluetooth version: Bluetooth V5.0 (drive-free plug and play)2. Music format: APE/FLAC/WAV/MP3/WMA3. Internal card capacity: support within 64G (TF card needs to be prepared by yourself)4. Body material: PC5. Transmission distance: about 15m without barriers6. Battery capacity: 300mAh polymer lithium battery7. Support protocol: AVRCP, A2DP8. Bluetooth mode: Bluetooth receiver/Bluetooth transmitter/FM transmitter9. Various systems: support XP/Vista/Win7/8/10 system/IOS10. Output: DC 5V/2.1A11. Music level: HFI high-definition stereo12. Basic functions: Bluetooth receiver (RX)/Bluetooth transmitter (TX)/TF card playback/FM transmitter (87.5-108HMZ FM)13. Support equipment: speakers/cars/TVs/desktop computers/notebooks/wired headphones/power amplifiers/projectors, etc.14. Packing list: adapter, manual, charging cable (about 0.5m), 3.5mm audio cable (about 1m)15. Weight: about 21g16. Size: about 5.5x2.1x1.5 cmFeatures:1. High-definition LED digital display, the use status is clear at a glance, using fire-resistant PC material, high-gloss surface technology, comfortable hand feeling2. Small size, easy to carry3. Not limited to car models, plug in the car AUX interface/FM radio to connect to the Bluetooth of the mobile phone, support listening to songs/navigation/calls, the signal is stable and no noise4. Smart compatible devices, support devices with audio input/output interfaces5. Support TF card, plug and play, built-in smart decoder, can directly play music files in TF card6. Multi-function buttons, support switch machine/play/pause/up and down song/volume up/down/sound source switching/frequency adjustment7. Built-in Bluetooth 5.0 chip, plug-and-play driver-free, strong compatibility, more stable connection

Read more less

1. Bluetooth version: Bluetooth V5.02. Body material: PC, ABS3. Transmission distance: about 10m without barriers4. Support protocol: AVRCP, A2DP5. Input: DC 5V/2.1A6. Interface type: USB interface/3.5mm interface7. Basic functions: Bluetooth receiver (RX)/Bluetooth transmitter (TX)/TF card playback/FM transmitter (adjustable frequency)/card reader/call/listen to songs/navigation8. Support equipment: all kinds of speakers/cars/TVs/desktop computers/notebooks/power amplifiers/projectors, etc.9. Music format: support APE/FLAC/WAV/MP3/WMA10. Memory card capacity: support within 64G (you need to bring your own TF card)11. Packing list: adapter, manual, 3.5mm audio cable12. Weight: about 15g13. Size: about 7.5x2.5x1.5 cmFeatures:1. High-definition LED digital display, the use status is clear at a glance2. Small size, easy to carry, PC fireproof casing of the fuselage, through high-gloss surface treatment process, sturdy and durable3. No restrictions on car models, plug in the car AUX port/FM radio to connect to the Bluetooth of the mobile phone, support listening to songs/navigation/calls4. Smart compatible devices, support devices with audio input/output interfaces5. Support TF card, plug and play6. Automatic power-on, four modes can be switched arbitrarily, piano paint material, comfortable touch7. Built-in Bluetooth 5.0 chip, fast connection speed and stable signal8. Memory function, automatically connect back after power on, memorize device/mode/song/frequency

Read more less

Specifications 1. Bluetooth version: V2.1 + EDR, class 2 2. Bluetooth profiles: A2DP & AVRCP 3. Bluetooth frequency range: 2.4GHz - 2.4835GHz 4. Effective range: 10 meters Introduction 1. It is stereo Bluetooth receiver especially designed for dock station 2. Plug this receiver into dock station, the music will be transmitted to dock station from your mobile phone which have Bluetooth stereo function 3. It is fully plug & play and it does not need extra power How to Connecting 1. Turn on the dock station before plugging the receiver 2. Then set the audio source to mobile 3. Finally plug the receiver into the dock 30 Pin connector port and the receiver will start to flash blue and red alternately Pairing Receiver with a Device 1. Once the receiver is plugged in, it will automatically enter in pairing mode 2. At this time you can turn on your bluetooth device to search for receiver and pair it 3. When receiver is detected, enter the PIN "0000" and confirm 4. After successful pairing, select receiver from bluetooth device list and press "connect" 5. After Successful connecting, the indicator light of receiver will be blue flashing slowly

Read more less

Specifications: 1. Technology: BT5.0, AVRCP (receiver mode only), A2DP 2. Operating range: max. 10 m / 33 ft (no barrier) 3. Pairing name (receiving mode): BT600 4. Transmitter mode: red LED light is on 5. Receiver mode: blue LED light is on 6. Product size: 32*17*10mm 7. Net weight: 15g ?? Packing list: - 1 x Bluetooth 5.0 Audio Transmitter/Receiver Adapter - 1 x 3.5mm dual head audio cable - 1 x Chinese and English manual ?? Features: 1. This portable and lightweight wireless audio transmitter and receiver is the ideal wireless audio Bluetooth transmission solution for every situation and application. 2. Transmitter mode: Wirelessly transmits audio from non-Bluetooth TVs, home stereo systems or CD players to Bluetooth headsets or speakers. 3. Receiver mode: Wirelessly transfer audio from a Bluetooth-enabled phone, tablet or computer to cable stereo, speakers or headphones. 4. This product is compatible with most Bluetooth protocol products on the market, with low output delay and stable performance. Widely used in computer / laptop / tablet / home stereo system / headset / smart phone / MP3 player and CD player and so on.

Read more less

1. Product name: USB Wireless Audio Transmitter2. Bluetooth version: 5.2+EDR3. Input port: USB/AUX4. Transmission distance: > 10m5. Frequency range: 2.402GHZ-2.480GHZ6. Supported protocols: SBC, A2DP, AVRCP7. Power supply: USB 5V8. Support equipment: connect two stereo earphones/Bluetooth speakers at the same time9. Product usage: - Insert the USB into the USB port of the TV/COMPUTER, and the blue light blinks quickly to enter the bluetooth search state. Turn on the Bluetooth headset/Bluetooth speaker to enter the pairing state, and the product will automatically search for connections. (Note: USB TV must support USB audio output, select in TV Sound Settings) After successful connection, the blue light will turn on.- USB power supply, connect AUX interface of 3.5mm audio cable with TV/computer /MP3 player and other devices, the red light is on, and the blue light flashes quickly to enter the search bluetooth state. Turn on the Bluetooth headset/Bluetooth speaker to enter the pairing state, the product will automatically search for the connection, and the blue light will turn on after the connection is successful.10. One drag two matching steps: When the first earphone is connected, hold down the button for 5 seconds, and the second blue light flashes quickly to enter the bluetooth search state. Turn on the Bluetooth headset/Bluetooth speaker to enter the pairing state, the product will automatically search for the connection, and the light will turn on when the connection is successful. (Note: Hold down for 8 seconds to reset and clear all connected devices.)11. Packing list:- USB Bluetooth transmitter x 1- 3.5mm audio cable x 1

Read more less

1. Bluetooth version: V5.02. Transmission distance: greater than or equal to 10M3. Shell material: ABS4. Bare metal weight: 11.88g5. Product size: 65 x 26 x 11mm6. A Bluetooth stereo audio wireless transmitter device, which can be used with digital devices with Bluetooth devices (such as Bluetooth speakers or Bluetooth headsets, etc.) to achieve indoor wireless high-definition audio transmission7. It can be used in digital products with audio output (3.5MM audio interface), just link the audio to the input port. Including computers, televisions and all other products that do not have their own Bluetooth transmitter function. With Bluetooth headsets or Bluetooth speakers, you can easily enjoy music and TV programs without affecting others and ensuring privacy.Packaging accessories:1 x Bluetooth transmitter host1 x 3.5 audio cable1 x3.5 pair TV AV cable

Read more less

1. Bluetooth version: bluetooth V5.0 (drive-free plug and play)2. Music format: APE/FLAC/WAV/MP3/WMA3. Internal card capacity: support within 64G4. Body material: PC5. Transmission distance: about 10m without barriers6. Battery capacity: 300mAh polymer lithium battery7. Support protocol: AVRCP, A2DP8. Bluetooth mode: Bluetooth receiver, Bluetooth transmitter9. Various systems: support XP/Vista/Win7/8/10 system/IOS10. Output: DC 5V/2.1A11. Music level: HFI high-definition stereo12. Basic functions: Bluetooth receiver (RX)/Bluetooth transmitter (TX)/TF card playback/FM transmitter (87.5-108HMZ FM)13. Support equipment: speakers/cars/TVs/desktop computers/notebooks/wired headphones/power amplifiers/projectors, etc.14. Packing list: adapter, manual, charging cable (about 0.5m), 3.5mm audio cable (about 1m)15. Weight: about 35g16. Size: about 5.5x2.1x1.5 cmFeatures:1. High-definition LED digital display, the use status is clear at a glance, using fire-resistant PC material, high-gloss surface technology, comfortable hand feeling2. Small size, easy to carry3. Not limited to car models, plug in the car AUX interface/FM radio to connect to the Bluetooth of the mobile phone, support listening to songs/navigation/calls, the signal is stable and no noise4. Smart compatible devices, support devices with audio input/output interfaces5. Support TF card, plug and play, built-in smart decoder, can directly play music files in TF card6. Multi-function buttons, support switch machine/play/pause/up and down song/volume up/down/sound source switching/frequency adjustment7. Built-in bluetooth 5.0 chip, plug-and-play driver-free, strong compatibility, more stable connection

Read more less

1. Bluetooth version: Bluetooth V5.02. Body material: PC, ABS3. Transmission distance: about 10m without barriers4. Support protocol: AVRCP, A2DP5. Output: DC 5V/2.1A6. Interface type: USB interface/3.5mm interface7. Basic functions: Bluetooth receiver (RX)/Bluetooth transmitter (TX)/TF card playback/FM transmitter (adjustable frequency)/card reader/call/listen to songs/navigation8. Support equipment: all kinds of speakers/cars/TVs/desktop computers/notebooks/power amplifiers/projectors, etc.9. Music format: support APE/FLAC/WAV/MP3/WMA10. Memory card capacity: support within 64G (you need to bring your own TF card)12. Packing list: adapter, manual, 3.5mm audio cable13. Weight: about 19g12. Size: about 7.5x2.5x1.5 cmFeatures:1. High-definition LED digital display, the use status is clear at a glance2. Small size, easy to carry, PC fireproof casing of the fuselage, through high-gloss surface treatment process, sturdy and durable3. No restrictions on car models, plug in the car AUX port/FM radio to connect to the Bluetooth of the mobile phone, support listening to songs/navigation/calls4. Smart compatible devices, support devices with audio input/output interfaces5. Support TF card, plug and play6. Automatic power-on, four modes can be switched arbitrarily, piano paint material, comfortable touch7. Built-in Bluetooth 5.0 chip, fast connection speed and stable signal8. Memory function, automatically connect back after power on, memorize device/mode/song/frequency

Read more less

1. Working voltage: DC 5V/500mA2. Bluetooth version: V5.0+EDR3. Frequency response: 10Hz-20KHz4. Battery capacity: 3.7V/500mAh lithium battery5. Transmission distance: about 15 meters without barriers6. Power supply mode: Micro USB interface7. Music format: MP3/APE/FLAC/WAV/WMA8. Frequency range: 2400-2483.5MHZ9. Peripheral support: U disk/TF card10. Bluetooth protocol: HFP/A2DP/AVRCP11. Interface type: AUX+RCA+coaxial+optical fiber12. Basic functions: Bluetooth receiving/transmitting, LED digital display screen, NFC connection, infrared remote control, call, navigation, listening to music13. Support equipment: mobile phones, tablets, computers, TVs, cable speakers, power amplifiers, projectors, mixers, etc.14. Packing list: host x1, Micro USB charging cable x1, 3.5mm audio cable x1, red and white RCA lotus cable x1, remote control (with button battery) x1, manual x115. Weight: about 75g16. Size: about 9.2x6.5x2 cmFeatures:1. The appearance is exquisite, exquisite and compact, easy to carry, the surface is made of fireproof PC material, high-gloss paint process, the base is equipped with a silicone pad, which is non-slip and wear-resistant2. Using Bluetooth 5.0 chip design, stronger compatibility and stability3. 3 in 1 design of Bluetooth receiver (RX), Bluetooth transmitter (TX) and FM transmitter4. High-definition LED digital display, working status and Bluetooth mode are clearly visible5. Built-in digital to analog chip, multiple interface options, support digital optical fiber, coaxial, AUX, RCA interface6. NFC function, mobile phone can be connected with one touch7. Cool breathing light, red/blue color, soft and not dazzling8. Support USB (U-disk), TF card playback and transmission9. Support FM transmission, and the frequency can be adjusted from 87.5~10810. With remote control, support infrared remote control of about 5-8 meters, easy to operate11. Built-in high-definition microphone, support wireless music listening, hands-free call, navigation12. Simple connection, multi-function button control, support play/pause/cut song/volume/mode switch/signal source switch and other functions, feel comfortable13. Built-in memory chip, can automatically restore the mode/signal/song before the power failure, intelligent voice reminder function

Read more less

1. Material: PC+ABS 2. Bluetooth standard: 5.0 3. Transmission distance: 10m 4. Input voltage: DC5V 5. Support protocol: A2DP/AVRCP/HFP 6. Support NFC function, can connect 2 Bluetooth devices at the same time 7. Size: 9.1x5.8x1.8cm 8. Packing list: - Bluetooth receiver x 1 - 3.5mm audio cable x 1 - USB charging cable x 1 - RCA cable x 1 - Manual x 1

Read more less

1. Bluetooth: Bluetooth 5.02. Material: ABS3. Working range: 10m4. Product size: 6.9*6.9*23.5cm5.Power supply: DC5V/1A6. Functions: RCA red and white lotus port / AUX audio port / TF card playback7. Accessory list: - Bluetooth adapter x 1- Lotus cable x 1 - Manual x 1- 3.5mm audio cable x 1- USB power cable x 1

Read more less

Specifications 1. Bluetooth version: V2.1 + EDR, class 2 2. Bluetooth profiles: A2DP & AVRCP 3. Bluetooth frequency range: 2.4GHz - 2.4835GHz 4. Effective range: 10 meters Introduction 1. It is stereo Bluetooth receiver especially designed for dock station 2. Plug this receiver into dock station, the music will be transmitted to dock station from your mobile phone which have Bluetooth stereo function 3. It is fully plug & play and it does not need extra power How to Connecting 1. Turn on the dock station before plugging the receiver 2. Then set the audio source to mobile 3. Finally plug the receiver into the dock 30 Pin connector port and the receiver will start to flash blue and red alternately Pairing Receiver with a Device 1. Once the receiver is plugged in, it will automatically enter in pairing mode 2. At this time you can turn on your bluetooth device to search for receiver and pair it 3. When receiver is detected, enter the PIN "0000" and confirm 4. After successful pairing, select receiver from bluetooth device list and press "connect" 5. After Successful connecting, the indicator light of receiver will be blue flashing slowly

Read more less

1. Brand new and high quality 2. High quality gadget make your life easily 3. Easy to use, install or setup 4. Exquisite round design with perfect process, mini body, more smaller and lighter 5. Multipoint technology - pairs two devices at once (two headphones, or one speaker & one headphone, etc.) 6. Built-in rechargeable battery 7. 3.5mm audio jack connects to TV, DVD or MP3 player (includes 3.5mm audio cable) 8. Bluetooth version 4.0 valid distance in 10 meters

Read more less

1.This extremely portable, lightweight wireless audio transmitter & receiver is an ideal wireless audio solution for a wide range of situations and uses2.Transmitter mode:wirelessly streams audio from your non-Bluetooth TV, home stereo system, or CD player to your Bluetooth headphones or speakers3.Receiver mode: wirelessly streams audio from your Bluetooth-enabled phone, tablet, or computer to your wired stereo, speakers, or headphones4.Mode switching: 1) If the device has been in a mode for a long time, it needs to be re-energized twice to switch to another mode. 2) If the device has just switched mode, you want to immediately switch to another mode, you only need to re-energize once.5.Pairing method RX mode: Pairing name: ZF-169, find it in the Bluetooth settings of the phone to pair. The blue light flashes during the pairing process, and the blue light stops flashing after the pairing is successful. Connect the product to the audio device with a 3.5 audio cable. TX mode: TX mode will automatically search for other Bluetooth receiving devices (such as Bluetooth headset, Bluetooth speaker, Bluetooth receiver, etc.), the red light flashes during pairing, and the red light stops flashing after pairing succeeds. Connect the product to a device such as a TV with a 3.5 audio cable/RCA audio cable.6.Super-Portable Audio-Streaming PowerThe ZF-169 just 18mm across and weighs only 18g , but has got powerful wireless audio streaming capabilities. Slip this transmitter & receiver into your backpack or laptop bag and take it on-the-go without the slightest effort.7.Broad Compatibility: With the included 3.5mm cable, this Receiver Transmitter adapter can widely be used on your computer, laptop, home stereo system, headphone, smartphone, Mp3 player, CD player, etc.Specifications:Model: ZF169Technologies: BT5.0, A2DP, AVRCP (receiver mode only)Operation Range: Up to 10m / 33ft (without any blocking objects)Pairing name(Receiver mode ):ZF-169Transmitter mode: red LED light is onReceiver mode: blue LED light is onDimensions: 32mm*17mm*8.5mmPackage Included:1X Bluetooth 5.0 Audio Transmitter/Receiver Adapter1X 3.5mm Aux Cable1x User Manual

Read more less

Specifications 1. Technologies: BT4.2, A2DP, AVRCP (receiver mode only) 2. Operation Range: Up to 10m / 33ft (without any blocking objects) 3. Charging Time: 2 hours 4. Continuous Use Time: 6 hours (Receiver Mode) / 5 hours (Transmitter Mode) 5. Battery Type: Li-Polymer (200mAh) 6. Dimensions: 44 x 44 x 12mm 7. Weight: 18g Features 1. This extremely portable, lightweight wireless audio transmitter & receiver is an ideal wireless audio solution for a wide range of situations and uses 2. Transmitter mode: wirelessly streams audio from your non-Bluetooth TV, home stereo system, or CD player to your Bluetooth headphones or speakers 3. Receiver mode: wirelessly streams audio from your Bluetooth-enabled phone, tablet, or computer to your wired stereo, speakers, or headphones 4. Switch between transmitter and receiver modes with the simple flick of a switch. Effortlessly connect using advanced Bluetooth technology and 3.5mm audio cable (included). 5. Super-Portable Audio-Streaming Power The KN319 is just 44mm (1.73 inch) across and weighs only 18g (0.63oz), but has got powerful wireless audio streaming capabilities. Slip this transmitter & receiver into your backpack or laptop bag and take it on-the-go without the slightest effort. 6. Broad Compatibility: With the included 3.5mm cable and 3.5mm to 2RCA cable, this Receiver Transmitter adapter can widely be used on your computer, laptop, home stereo system, headphone, smartphone, Mp3 player, CD player, etc. Package Content - 1 x Bluetooth 4.2 Audio Transmitter/Receiver Adapter - 1 x Micro USB Power Cable - 1 x RCA Cable - 1 x 3.5mm Aux Cable - 1 x User Manual

Read more less

Features:1. Bluetooth 5.0 adapter: strong compatibility, suitable for TV, computer, headset, mouse, keyboard and other universal, can be used in home audio and video, cars and offices and other venues2. Bluetooth 5.0 + EDR: more compatible, more stable signal transmission, 10 meters barrier-free transmission3. Two-in-one transmission and reception: one adapter dual mode, at the same time to meet the transmission and reception functions4. Free driver: plug and play, install driver for free, quick pairing, easy to use5. Small size, easy to carryProduct parameters:1. Weight: 5g2. Interface: 3.5mm AUX3. Dimensions: about 32 x 18 x 10.2 mm4. Transmission rate: 25Mbps5. Working frequency: 24MHz6. Effective working radius: 10mPacking list:USB Bluetooth audio transmitter x 13.5mm AUX audio cable x 1

Read more less

1. Ideal wireless audio solution for various situations and uses2. Transmitter mode: wirelessly transmit audio from non-Bluetooth TVs, home stereo systems or CD players to Bluetooth headsets or speakers3. Receiver mode: wirelessly transmit audio from Bluetooth-enabled mobile phones, tablets or computers to wired stereo, speakers or headphones4. You can switch between the transmitter and receiver modes with just one touch of the switch. Use advanced Bluetooth technology and 3.5mm audio cable (included) to easily connect.5. Put this transmitter and receiver in your backpack or laptop bag, you can take it with you without any effort6. Equipped with 3.5mm cable and 3.5mm to 2 RCA cable, this receiver transmitter adapter can be widely used in your computer, laptop, home stereo system, headset, smart phone, Mp3 player, CD player, etc.Product parameters:1. Technology: BT5.0, A2DP, AVRCP (receiver mode only)2. Operating range: up to 10m (without any blocking objects)3. Pairing name: KN3214. Charging time: 2 hours5. Battery type: lithium polymer (200mAh)6. Bare metal size: 44x44x12mm7. Weight: 18gPacking list:Bluetooth 5.0 audio transmitter/receiver adapter x 1Micro USB power cord x 1RCA cable x 13.5mm auxiliary cable x 1User Manual x 1

Read more less

Product parameters:1. Bluetooth solution: 5.0 EDR, A2DP, HSP, AVRCP2. Frequency: 2.4GHz-2.48GHz3. Bluetooth transmission distance: less than or equal to 10 meters4. Bluetooth receiving distance: less than or equal to 10 meters5. Charging voltage: DC 5V6. Battery: 300mAh7. Working time: about 6 hours8. Bluetooth receiving function: connect 1 mobile phone9. Bluetooth transmitter function: 2 pairs of Bluetooth headsets or Bluetooth speakers can be connected at the same time10. Color: blackPacking list:Host x 1Power cable x 1Audio cable x 1Manual x 1

Read more less

1. Bluetooth version: 4.12. No need to install any software, plug and play3. Transmit the TV sound to the home combo speaker via Bluetooth, no need to worry about wiring troubles4. Transmit the TV sound to the Bluetooth headset via Bluetooth, you can enjoy it alone in the dead of night 5. Shocking sound effects, no need to worry about disturbing others6. This Bluetooth transmitter is not only suitable for families, but also suitable for classroom lectures and conference lecture occasions7. Speak directly to the mark of the product, you can emit the speech sound to the Bluetooth speaker, no 8. You need to worry that the sound is too small, others will not hear it, and your voice will no longer be smoky.9. Weight: 9 grams10. Bare metal size: 4x4x8 cmIntroduction:1. Support paired Bluetooth stereo headset/headphone to control play/pause, forward/backward2. Support automatic pairing (no buttons)3. Support pairing pin code: 1234000088884. Frequency range: 2.42 to 2.480 MHz (analog) spectrum5. Frequency range: 2.42 to 2.480 MHz (analog) spectrum6. Working current: 40mA max7. Compatible with 30PIN8. Operating range: 10 meters

Read more less

1. Product Model: M102. Bluetooth version: 5.03. Material: ABS4. Main functions: Bluetooth 5.0, USB disk nondestructive decoding, NFC function, App remote control, infrared remote control5. Bluetooth reception distance: within 10m6. Interface: AUX+RAC+USB7. Music format: MP3/APE/FLAC/WAV/WMA8. Product size: 88X62X21mm9. Product weight: 53g10. Accessories: power supply line, remote control (built-in button battery)Specification: Package Weight One Package Weight 0.16kgs / 0.34lb One Package Size 15cm * 12cm * 3.5cm / 5.91inch * 4.72inch * 1.38inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 86cm * 69cm * 20cm / 33.86inch * 27.17inch * 7.87inch Loading Container 20GP: 224 cartons * 194 pcs = 43456 pcs 40HQ: 521 cartons * 194 pcs = 101074 pcs

Read more less

Product parameters:1. Specification: Neutral English2. Model: Bluetooth audio receiver3. Bluetooth version: V5.04. Battery capacity: 200mAh5. Battery life: 15h6. Bluetooth distance: 10M(open area)7. Charging port: Type-C8. Audio output: AUX9. Compatible: Android, iOS mobile phone and PAD, and all Bluetooth audio devices, audio devices with audio input interface10. Size: 27x12x61.7mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 6.5cm * 1.5cm / 3.94inch * 2.56inch * 0.59inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 77cm * 50cm * 11cm / 30.31inch * 19.69inch * 4.33inch Loading Container 20GP: 629 cartons * 468 pcs = 294372 pcs 40HQ: 1461 cartons * 468 pcs = 683748 pcs

Read more less

1. Bluetooth version: 5.12. Product Model: BT073. Main functions: LED display, Bluetooth audio output, optical fiber, coaxial, AUX audio transmission4. Supporting equipment: mobile phone/tablet/TV/audio/power amplifier, etc5. Output parameter: DC 5V6. Bluetooth reception distance: 10m7. Product size: 80x50x25mm 8. Net weight: 65g9. Accessories: bluetooth receiver, power supply line, instruction manualSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 16cm * 12cm * 3.5cm / 6.3inch * 4.72inch * 1.38inch Qty per Carton 434 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 90cm * 36cm / 35.43inch * 35.43inch * 14.17inch Loading Container 20GP: 91 cartons * 434 pcs = 39494 pcs 40HQ: 212 cartons * 434 pcs = 92008 pcs

Read more less

1. Product Model: BT082. Bluetooth version: 5.03. Main functions: Bluetooth, USB disk lossless decoding, support microphone karaoke, digital audio to analog, with remote control4. Bluetooth reception distance: less than 10m5. Music format: MP3/APE/FLAC/WAV/WMA6. Product size: 92x88x26mm, antenna length 108mm7. Net weight: 85g8. Gross weight: 228g9. Accessories: Infrared remote control x1, power supply line x1, 3.5 RPM double Lotus x1, double lotus two pairs of two x1, optical fiber x1Specification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 16cm * 12cm * 3.5cm / 6.3inch * 4.72inch * 1.38inch Qty per Carton 128 Carton Weight 30.00kgs / 66.14lb Carton Size 80cm * 60cm * 17cm / 31.5inch * 23.62inch * 6.69inch Loading Container 20GP: 326 cartons * 128 pcs = 41728 pcs 40HQ: 758 cartons * 128 pcs = 97024 pcs

Read more less

1. Bluetooth version: V5.02. Support protocol: RX (A2DP, AVRCP, HFP), TX (A2DP)3. Working frequency band: 2.402GHz -2.480GHz4. Audio coding: SBC5. Working current: RX is less than 22mA, TX is less than 35mA6. Built-in battery: 250mAH7. Charging current: about 200mA8. Charging time: about 2 hours9. Bluetooth distance: greater than 10m (open place)10. Charging method: Micro USB 5V/0.5A11. Input/output connection mode: AUX interface12. Compatible: Android, IOS system mobile phone and PAD, and Bluetooth 13. Speaker or headset connection use14. Weight: about 23g15. Size: about 5.2x1.3 cmPacking list:- Bluetooth adapter x1- 3.5mm audio cable x1- Charging cable x1- Manual x1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 356 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs 40HQ: 412 cartons * 356 pcs = 146672 pcs

Read more less

1. Bluetooth version: V5.02. Function: Bluetooth audio receiving and transmitting combo3. Transmission signal distance: about 10m4. Input interface: 3.5mm5. Input voltage: DC 5V6. Transmission rate: 5Mbps7. Working frequency: 2.4MHz8. Weight: about 16.2g9. Size: about 8.2x2.94x1.33 cmFeatures:1. Built-in noise reduction HIFI sound quality2. LCD screen display, more convenient to use3. Supports hands-free calling. When there is an incoming call in receiving mode, press the M key to answer the call hands-free4. Fully compatible with automatic matching, no need to drive, plug and play5. Accept RX+TX TX two-in-one design, dual signal one-key switch, simple and convenient to use, suitable for a variety of equipment6. In transmit mode, 8 nearby Bluetooth devices can be searched and displayed, making the operation more intuitive and convenient7. Swipe the side switch to switch the mode with one key, which can receive and transmitSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10.5cm * 7cm * 2cm / 4.13inch * 2.76inch * 0.79inch Qty per Carton 500 Carton Weight 22.00kgs / 48.50lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs 40HQ: 562 cartons * 500 pcs = 281000 pcs

Read more less

1. Bluetooth version: Bluetooth V5.02. Support protocol: RX (A2DP/AVRCP), TX (A2DP)3. Working frequency band: 2.402GHz -2.480GHz4. Support dual stream (TX mode): support a transmitter to connect two Bluetooth speakers or earphones at the same time to use a CODEC at the same time, can support APTX LL5. Support multi-point connection (RX mode): support to connect two mobile phones6. Battery capacity: 500mAh7. Charging current: about 350mA8. Charging time: about 2.5 hours9. Bluetooth distance: greater than 80m (unobstructed)10. Charging method: Micro USB 5V/0.5A11. Input/output connection mode: RCA interface, I2S AUX interface, support RCA, AUX dual simultaneous output12. Compatible: Android, IOS system mobile phone and PAD, and Bluetooth speakers or earphones supporting A2DP protocol to connect and use13. Size: about 11x9x2.5cm14. Weight: about 70gFeatures:1. Exquisite appearance2. Using CSR high-end chip design3. One-key switch between RX and TX modes4. RCA, I2S audio input/output interface, can be switched freely5. Two antennas, the Bluetooth operating distance is greater than 80M, and the stability is strong6. High fidelity lossless sound quality, ultra-low latency sound output, support apt-X LL, apt-X, SBC, AAC, FS7. When the battery is less than 20%, there will be a low battery reminder. After 6 minutes in the RX, TX mode without connection, it will automatically enter the sleep power saving mode, and it has its own battery protection IC, which is safe and reliable while charging.8. Support dual-stream (TX mode) transmission and connect two Bluetooth audio devices9. Receive (RX) can be connected to two devices at the same time, any two of the mobile phone/tablet/notebook device, and the volume and up and down songs can be controlled by the buttons during playback10. Both receiving mode and transmitting mode can realize automatic return connection, and have memory function for connected products11. Simple connection, no need to drive and download APPPacking list:- Adapter x1- USB charging cable x1- 3.5mm audio cable x1- RCA audio cable x1- Manual x1Specification: Package Weight One Package Weight 0.18kgs / 0.39lb One Package Size 15.5cm * 9.5cm * 3cm / 6.1inch * 3.74inch * 1.18inch Qty per Carton 172 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 172 pcs = 30444 pcs 40HQ: 412 cartons * 172 pcs = 70864 pcs

Read more less

1. It can make all TVs, set-top boxes, DVDs and other devices have Bluetooth function, and then transmit audio to Bluetooth headsets or Bluetooth speakers; you can also wirelessly transmit audio to Bluetooth speakers and headsets using Bluetooth on mobile phones and computers 2. Built-in battery, Type-C interface for fast charging, acrylic shell, button on the top of the fuselage 3. The transmitter supports 1 to 2 (TV can be connected to 2 Bluetooth headsets or Bluetooth speakers) 4. Transmitting and receiving can be switched in one dual mode, HIFI level sound quality 5. aptX-HD lossless HIFI CD-level audio transmissionSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 84 Carton Weight 13.60kgs / 29.98lb Carton Size 44cm * 42cm * 42cm / 17.32inch * 16.54inch * 16.54inch Loading Container 20GP: 343 cartons * 84 pcs = 28812 pcs 40HQ: 797 cartons * 84 pcs = 66948 pcs

Read more less

1. Model: RT012. Technology: BT5.0, A2DP, AVRCP3. Operating range: maximum 10m / 33ft (no blocking objects)4. Match name: RT015. Charging time: 2 hours, working time: 12 hours6. Battery type: Lithium polymer (400mAh)7. Size: 65x45x21mm, Weight: 40g8. Package contents :1 x Bluetooth 5.0 audio Transmitter/receiver adapter 1x Micro USB power cord 1X RCA cable 1X 3.5mm auxiliary cable 1X User manual9. Power on: Press and hold the power on/off button until the LED lights on/off: press and hold the power on/off button until the LED goes off10. Charging: Use DC-5V charger and Micro USB charging cable. The red light goes on when charging. When the battery is fully charged, the red light goes out.11. Switching mode: (RX: receiving mode, indicator light: blue LED) (TX: transmitting mode, indicator light: red LED)12. RX mode:The receiving mode can be used in the home, car and other scenes, enabling speakers without Bluetooth function to have Bluetooth function, realizing wireless connection with mobile phones, tablets and other devices, saying goodbye to the cable bondage.13. How to use:1) First switch RT01 to receive mode (RX), pair name: RT01, and find the RT01 pair in the Bluetooth Settings of the mobile phone. The blue light flashes twice every second during the pairing and once every three seconds after the pairing is successful.2) Insert one end of the audio cable into the audio input end of the speaker and the other end into the audio input end of the RT01. Then you can play the music.14. TX mode:The transmit mode can be used on non-Bluetooth sound source devices such as computers and televisions to help these devices transmit sound to Bluetooth speakers and headsets. TX mode will automatically search for other Bluetooth receiver devices (such as Bluetooth headset, Bluetooth speaker, bluetooth receiver, etc.), and the red light will blink twice every second during the pairing process and once every three seconds after the pairing is successful.15. Use:1) Insert one end of the audio cable into the audio output end of the device and the other end into the audio input end of the RT01.2) Make sure it is in TX mode (red flashing). The RT01 will automatically search for Bluetooth headsets or Bluetooth speaker pairs. Once paired, a TV or computer voice can be transmitted to a device such as a Bluetooth speaker via the RT01.16. Bluetooth speakerphone call: In RX receiving mode, this product supports Bluetooth speakerphone call. When the phone calls, click the M button to answer the call.Specification: Package Weight One Package Weight 0.10kgs / 0.21lb One Package Size 12.5cm * 9cm * 2.6cm / 4.92inch * 3.54inch * 1.02inch Qty per Carton 326 Carton Weight 30.00kgs / 66.14lb Carton Size 86cm * 61cm * 17cm / 33.86inch * 24.02inch * 6.69inch Loading Container 20GP: 299 cartons * 326 pcs = 97474 pcs 40HQ: 694 cartons * 326 pcs = 226244 pcs

Read more less

1. Bluetooth 4.0 version, CSR8635 chip 2. HIFI sound quality, support AAC, MP3, SBC format decoding 3. Using non-capacitive type G digital amplifier, high output amplitude, high signal to noise ratio, THD+N is only 0.006% 4. Independent +3DB gain omnidirectional antenna design, the farther the reception distance of up to 20 meters (L.O.S) 5. 3.5mm standard headphone jack output, compatible with 2RCA socket output for the AV amplifier 6. 2 groups of independent power supply design, support plug-in use or built-in battery, long-term use of battery without over-charging damage 7. Long playing time up to 20 hours of playback (built-in battery version)Specification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 15cm * 15cm * 3.5cm / 5.91inch * 5.91inch * 1.38inch Qty per Carton 60 Carton Weight 12.30kgs / 27.12lb Carton Size 47cm * 32cm * 38cm / 18.5inch * 12.6inch * 14.96inch Loading Container 20GP: 466 cartons * 60 pcs = 27960 pcs 40HQ: 1083 cartons * 60 pcs = 64980 pcs

Read more less

1. Interface: RCA / AUX 3.5mm 2. Performance: HIFI level 3. Bluetooth version: 5.0 4. Effective distance: 15m 5. Signal-to-noise ratio: >110db 6. Frequency response atmosphere: 10Hz-20KHz 7. Output impedance: 75 ohms 8. Distortion: <0.02% 9. Product size: 109x73x29mmSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 16cm * 13cm * 4cm / 6.3inch * 5.12inch * 1.57inch Qty per Carton 40 Carton Weight 10.60kgs / 23.37lb Carton Size 42cm * 34cm * 28cm / 16.54inch * 13.39inch * 11.02inch Loading Container 20GP: 666 cartons * 40 pcs = 26640 pcs 40HQ: 1548 cartons * 40 pcs = 61920 pcs

Read more less

1. Plug and play, no need to install software2. Support stereo coaxial analog output3. Support APTX-HD, SBC, ACC Bluetooth format4. Support 3.5mm headphone jack output5. Type-c USB interface, used for power supply, or output as USB sound card decoding6. CD format sound quality7. Transmission rate: 100Mbps8. Interface: AUX9. Working frequency: 2.4MHz10. Working distance: 10 meters11. Bluetooth standard: 5.012. Headphone output impedance: 22 ohms13. Headphone output voltage: 2V14. Working current: 150-250mA15. Working power: 0.075-0.125W16. Working voltage: 5VSpecification: Package Weight One Package Weight 0.06kgs / 0.13lb One Package Size 6cm * 5cm * 1.5cm / 2.36inch * 1.97inch * 0.59inch Qty per Carton 404 Carton Weight 30.00kgs / 66.14lb Carton Size 44cm * 36cm * 11cm / 17.32inch * 14.17inch * 4.33inch Loading Container 20GP: 1530 cartons * 404 pcs = 618120 pcs 40HQ: 3552 cartons * 404 pcs = 1435008 pcs

Read more less

1. Product interface: RCA interface / AUX audio interface2. Bluetooth version: Bluetooth 5.03. Connection range: 15m4. Battery capacity: 200mAh5. Work length: receive 8h / transmit 5h6. Frequency range: 10Hz-20HKz7. Signal-to-noise ratio: less than 110dB8. Product features: Bluetooth receiving / transmitting function combination9. Package: 1*Bluetooth adapter,1*Charging cable,1*Audio cableSpecification: Package Weight One Package Weight 0.13kgs / 0.28lb One Package Size 15cm * 8cm * 2.5cm / 5.91inch * 3.15inch * 0.98inch Qty per Carton 322 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 54cm * 19cm / 35.43inch * 21.26inch * 7.48inch Loading Container 20GP: 288 cartons * 322 pcs = 92736 pcs 40HQ: 670 cartons * 322 pcs = 215740 pcs

Read more less

1. Converts digital toslink audio signals to 2 RCA L / R and 3.5mm analog auxiliary audio.2. Available for connection to an external device such as an amplifier via standard 3.5mm / RCA aux connectors.3. Supports sampling rate of 32.44, 1, 48 and 96KHz4. 24-bit SPDIF incoming bit stream on left and right channels5. Provides transmission without electromagnetic noise6.Easy to install and easy to operate7. Compact size and light weight8. The Toslink Optical Digital to Analog Audio signal converter is designed to switch home or professional audio9. Converts Toslink digital audio signals to 2RCA L / R and 3.5mm analog auxiliary audio and available for connection to an external device such as an amplifier via standard RCA-style connectors.10. This converter is small and easy enough to install.11. Packing list:- Bluetooth receiver x 1- Manual x 1- USB-C cable x 1- Fiber optic cable x 1- 3.5mm audio cable x 1- RCA audio cable x 1Specification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 7cm * 2.5cm / 6.3inch * 2.76inch * 0.98inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 90cm * 43cm * 17cm / 35.43inch * 16.93inch * 6.69inch Loading Container 20GP: 405 cartons * 242 pcs = 98010 pcs 40HQ: 940 cartons * 242 pcs = 227480 pcs

Read more less

1. Q2 is an innovative WiFi/Bluetooth 2 in 1 digital audio adapter, which can be connected to your home Wi-Fi network, turning your current speakers and home theater into a wireless multi-room audio system2. Special iOS and Android apps provide the simplest and smartest experience for wireless multi-room audio system setup. In addition, Q2 also provides the most powerful playback options, 3. Which allows you to play synchronized music in multiple rooms or Different music, from local music U disk/mobile phone/online music service/NAS/UPNP network, to provide you with high-quality Hi-Fi audiovisual experience4. Q2 has an exquisite design and is an all-digital audio receiver with beautiful features and a standard HIFI level. Support WiFi and Bluetooth 5.0 connection. Q2 allows you to more conveniently control streaming media from smart devices such as mobile phones/tablets, USB, and NAS, and support Airplay, DLNA, UPnP5. Multi-room mode: It can play the same song in all rooms, or different music in different rooms; support multi-room mode, it can play the same song in all rooms, or different music in different rooms6. Support mobile phone on-demand Q2 to read any song on the U disk. U disk playback supports MP3/WMA/AAC/AAC+/ALAC/FLAC/APE/WAV and other lossless audio format decodingSpecification:1. WiFi: 2.4G IEEE802.11 b/g/n2. Support streaming media protocols: Airplay, DLNA, UPNP, Spottily Connect3. Bluetooth version: V5.04. Bluetooth protocol: AVRCP, A2DP, HFP/HSP and other protocols5. Output interface: 3.5mm stereo, AUX output, digital optical audio output, Optical output6. Function: U disk playback, Support multiple lossless audio format decoding7. Support: MP3, WMA, ACC , Apple Lossless (ALAC), LAC, APE, WAV and other audio format decoding8. Support EQ sound adjustment9. Support IR remote control operation10. Material: ABS11. Power supply: Type-C USB 5V12. Compatibility: support Android system, iOS system smartphones, tablets and other Bluetooth devices13. Size: 8.8x8.8x1.8cm14. Host weight: 65gPackage included:1 x Q2 Hi-Fi Wireless Music Receiver Box1 x USB Type-C Charging Cable1 x 3.5mm Audio Cable1 x Optical Fiber Audio Cable1 x Infrared Remote Control (NO batteries)1 x English and Chinese Manual1 x Storage BagSpecification: Package Weight One Package Weight 0.24kgs / 0.53lb One Package Size 12cm * 11cm * 3.5cm / 4.72inch * 4.33inch * 1.38inch Qty per Carton 134 Carton Weight 30.00kgs / 66.14lb Carton Size 61cm * 56cm * 17cm / 24.02inch * 22.05inch * 6.69inch Loading Container 20GP: 459 cartons * 134 pcs = 61506 pcs 40HQ: 1066 cartons * 134 pcs = 142844 pcs

Read more less

1. Plug and play, no need to install software drivers2. Can be used with Bluetooth stereo audio transmitter or notebook Bluetooth to achieve indoor wireless high-fidelity audio transmission3. Simple operation, plug in the audio input line of the speaker and use it4. Long receiving distance, up to 15 meters in open and unobstructed areas5. High sensitivity, high performance chip6. Miniaturized, user-friendly design, easy to carry and beautiful7. Low energy consumption, long battery life8. Support bluetooth mobile phone, bluetooth computer, for iPhone, for iPad, for MID all digital products with bluetooth function9. Transfer rate: 2.4MBPS10. Power mode: USB11. Input voltage: DC 5V12. Input current: 1A13. Input power: 5W14. Net weight: 25GSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 12.2cm * 10.5cm * 2cm / 4.8inch * 4.13inch * 0.79inch Qty per Carton 500 Carton Weight 27.00kgs / 59.52lb Carton Size 50cm * 50cm * 54cm / 19.69inch * 19.69inch * 21.26inch Loading Container 20GP: 197 cartons * 500 pcs = 98500 pcs 40HQ: 458 cartons * 500 pcs = 229000 pcs

Read more less

1. Bluetooth standard: 5.02. Transmission rate: 200Mbps3. Operating frequency: 2.4MHz4. Interface: 3.5mm5. Support AUX/RCA audio output, compatible with most TVs on the market6. Support low latency (aptX-LL), providing audio signal without delay7. 230ft long-distance Bluetooth transmission, covering the whole room8. Adopt CSR high-end chip design9. One-key switch between RX and TX modes10. RCA, I2S audio input/output interface, freely switchable11. Two antennas, the Bluetooth distance is about 80 meters, and the stability is strong12. High-fidelity lossless sound quality, ultra-low latency sound output13. Support apt-X LL, apt-X, SBC, AAC, FS.14. Built-in 500mAh battery, long battery life15. When the power is lower than 20%, there will be a low-power reminder. The product will automatically enter the sleep power-saving mode after 6 minutes in the RX and TX modes without connection. It has its own battery protection IC, which is safe and reliable.16. Support dual stream Support Dual stream (TX mode) transmission can connect two Bluetooth audio devices17. Automatic reconnection can be realized in both receiving mode and transmitting mode, and the connected product has a memory function18. Weight: 70 gramsSpecification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 20cm * 13cm * 5cm / 7.87inch * 5.12inch * 1.97inch Qty per Carton 302 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 302 pcs = 53454 pcs 40HQ: 412 cartons * 302 pcs = 124424 pcs

Read more less

1. Bluetooth version: 5.02. Interface: 3.5mm3. Transmission rate: 3000Mbps4. Effective working radius: 10 meters5. Operating frequency: 2.4MHz6. Supported protocols: RX: A2DP AVRCP/TX: A2DP7. Use range: up to 10 meters8. Support dual stream (TX mode): support one transmitter to connect two Bluetooth speakers or headphones at the same time9. Support multi-point connection (RX mode): support to connect two mobile phones10. Codec mode: RX aptX HD, aptX low latency, aptX, AAC, SBC, TX aptX HD, aptX low latency, aptX, SBC11. Support bluetooth headset, bluetooth audio, bluetooth receiver and other equipment key: 0000 1111 1234 888812. Battery type: 3.7V, 600mAh Li-ion polymer battery13. Charging time: about 3 hours14. Dimensions: 66x66x20mm15. Net weight: about 47 gramsSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 8cm * 8cm * 4cm / 3.15inch * 3.15inch * 1.57inch Qty per Carton 318 Carton Weight 30.00kgs / 66.14lb Carton Size 54cm * 54cm * 27cm / 21.26inch * 21.26inch * 10.63inch Loading Container 20GP: 338 cartons * 318 pcs = 107484 pcs 40HQ: 786 cartons * 318 pcs = 249948 pcs

Read more less

1. Bluetooth version: Bluetooth V5.3 2. Supported protocols: A2DP, AVRCP, AFH, HFP, HSP 3. Working frequency band: 2.402-2.480GHz 4. Power class: Class II 5. Input interface: USB (driver-free), AUX audio 6. Power supply mode: USB 5V power supply 5. Support dual stream (TX mode): The transmitter supports connecting two Bluetooth speakers or headphones at the same time (using the same CODEC), and the dual connection can support aptX Adaptive 6. Codec mode: aptX Adaptive/aptX HD/aptX LL/aptX/SBC 7. Note for APTX use: aptX Adaptive CODEC is preferentially supported in single connection (the connected device must also support aptX Adaptive) 8. Bluetooth distance: greater than 10m (without obstruction and interference) 9. Status indicator: 2 indicators. The blue light flashes quickly, the first device is searched and paired; the blue light is always on, the Bluetooth device is successfully connected; the green light flashes quickly, the second device is searched and paired; the green light is always on, the two Bluetooth devices are successfully connected 10. Audio coding indicator: audio transmission coding status light, lit when corresponding to audio coding; aptX Adaptive coding LL and HD lights are lit at the same time 11. Button: Click to connect back, double-click to quickly enter the pairing state 12. Compatible with: common computer systems, such as: Windows XP/7/8/10, Linux/ps4/NS/Android 13. On/Off: Automatically turn on after connecting the power adapter or computer USB power supply, and automatically turn off after unplugging Packing list: USB transmitter x 1 Antenna x 1 Manual x 1 3.5mm audio cable x 1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 560 Carton Weight 17.80kgs / 39.24lb Carton Size 44cm * 42cm * 42cm / 17.32inch * 16.54inch * 16.54inch Loading Container 20GP: 343 cartons * 560 pcs = 192080 pcs 40HQ: 797 cartons * 560 pcs = 446320 pcs

Read more less

1. Bluetooth version: Bluetooth V5.3 2. Supported protocols: A2DP, AVRCP, AFH, HFP, HSP 3. Working frequency band: 2.402-2.480GHz 4. Power class: Class II 5. Input interface: USB (driver-free), AUX audio 6. Power supply mode: USB 5V power supply 5. Support dual stream (TX mode): The transmitter supports connecting two Bluetooth speakers or headphones at the same time (using the same CODEC), and the dual connection can support aptX Adaptive 6. Codec mode: aptX Adaptive/aptX HD/aptX LL/aptX/SBC 7. Note for APTX use: aptX Adaptive CODEC is preferentially supported in single connection (the connected device must also support aptX Adaptive) 8. Bluetooth distance: greater than 10m (without obstruction and interference) 9. Indicator light: 2 indicator lights. The blue light flashes quickly, the first device is searched and paired; the blue light is always on, the Bluetooth device is successfully connected; the green light flashes quickly, the second device is searched and paired; the green light is always on, the two Bluetooth devices are successfully connected 10. Button: click to connect back, double-click to quickly enter the pairing state 11. Compatible with: common computer systems, such as: Windows XP/7/8/10, Linux/ps4/NS/Android 12. On/Off: Automatically turn on after connecting the power adapter or computer USB power supply, and automatically turn off after unplugging Packing list: USB transmitter x 1 Manual x 1 3.5mm audio cable x 1Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 6cm * 2cm / 3.94inch * 2.36inch * 0.79inch Qty per Carton 560 Carton Weight 17.80kgs / 39.24lb Carton Size 44cm * 42cm * 42cm / 17.32inch * 16.54inch * 16.54inch Loading Container 20GP: 343 cartons * 560 pcs = 192080 pcs 40HQ: 797 cartons * 560 pcs = 446320 pcs

Read more less

1. Bluetooth solution: 5.0 EDR, A2DP, HSP, AVRCP2. Frequency: 2.4GHz-2.48GHz3. Charging voltage: DC 5V4. Bluetooth receiving function: connect 1 mobile phone5. Bluetooth transmitter function: connect 1 pair of Bluetooth headset6. Transmit and receive support to read TF card and play7. Screen display: can display 8 device names to be paired (transmitting) / can display the paired mobile phone name (receiving)Packing list:Host x 13.5mm audio cable x 1RCA audio cable x 1Power cord x 1Optical cable x 1Manual x 1Specification: Package Weight One Package Weight 0.24kgs / 0.52lb One Package Size 14cm * 12cm * 6cm / 5.51inch * 4.72inch * 2.36inch Qty per Carton 56 Carton Weight 12.50kgs / 27.56lb Carton Size 50cm * 44cm * 30cm / 19.69inch * 17.32inch * 11.81inch Loading Container 20GP: 404 cartons * 56 pcs = 22624 pcs 40HQ: 937 cartons * 56 pcs = 52472 pcs

Read more less

Features: 1. Exquisite appearance 2. Adopt CSR chip design 3. Support TX dual stream 4. Support audio input mode interchange, USB, AUX can be switched freely 5. Support USB 5V power supply, so that your device will never lose power 6. Using an external signal antenna, the signal is stronger and the connection is more stable. 7. Support SBC, apt-X LL, apt-X HD, apt-X 8. The product connection is simple, without any cumbersome driving and downloading APP Product Specifications: 1. Bluetooth version: V5.0; Supported protocols: A2DP, AVRCP; Bluetooth distance: more than 10m (unobstructed place) 2. Working frequency band: 2.402GHz-2.480GHz 3. Power class: Class II 4. Input interface: USB, AUX audio 5. Power supply mode: USB DC 5V power supply 6. Support dual stream (TX mode): support one transmitter to connect two bluetooth speakers or headphones at the same time (use one CODEC at the same time) 7. Codec mode: CODEC, APTX HD, APTX LL, APTX, SBC 8. Note for APTX use: support low-latency apt-X LL CODEC (connected devices must also support apt-X LL), dual connections can also support APTX LL 9. Pairing indicator: the blue light is on when one device is connected, and the green light is on when the one-to-two connection is successful 10. Encoding light: respectively encode the audio transmission of Bluetooth devices: APTX HD, APTX LL, APTX, SBC 11. Pairing button: click to connect back, double-click to quickly enter the pairing state 12. LL/HD switch button: click to switch cycle (the connected Bluetooth device also needs to support LL/HD audio encoding) 13. Duplex call mode: During USB audio transmission, when connecting to a Bluetooth device, press and hold the pairing button for 1 second to switch to duplex call mode 14. Compatible: Support PC use, support Switch dock mode 15. Dimensions: 83x28.5x14 mm 16. Weight: 24g Packing list: Host x 1 3.5mm audio cable x 1 External Antenna x 1 Operating Instructions x 1Specification: Package Weight One Package Weight 0.04kgs / 0.08lb One Package Size 15cm * 9cm * 2cm / 5.91inch * 3.54inch * 0.79inch Qty per Carton 300 Carton Weight 10.90kgs / 24.03lb Carton Size 47cm * 47cm * 42cm / 18.5inch * 18.5inch * 16.54inch Loading Container 20GP: 287 cartons * 300 pcs = 86100 pcs 40HQ: 667 cartons * 300 pcs = 200100 pcs

Read more less

1. Chip: CSR86752. Bluetooth version: Bluetooth V5.03. Supported protocols: RX: A2DP AVRCP TX: A2DP4. Working frequency band: 2.402GHz -2.480GHz5. Power level: power level 1 (Class I)6. Sensitivity: -80dBm7. Signal-to-noise ratio: above 75dB8. Codec: TX: apt-X HD, apt-X LL, apt-X, SBC; RX: apt-X HD, apt-X LL, apt-X, SBC9. Built-in battery: 1000MAH10. Charging current: about 200MA11. Charging time: about 4.5 hours12. Battery life: RX is greater than 20H, TX is about 15H on average13. Bluetooth distance: greater than 80M (straight line without obstruction)14. Charging method: Micro USB 5V/0.5A15. Input/output connection: SPDIF interface, I2S AUX interface16. Compatible: Android, IOS system mobile phones and PAD, and Bluetooth speakers or headphones that support A2DP protocol are connected to use17. Support dual stream (TX mode)18. Support one yovda transmitter to connect two bluetooth speakers or headphones at the same time and use one CODEC at the same time19. Support multi-point connection (RX mode)20. Support to connect two mobile phones21. Size: about 12.5x7.5cm22. Weight: about 113 gramsSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 14.5cm * 10cm * 6cm / 5.71inch * 3.94inch * 2.36inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs 40HQ: 412 cartons * 98 pcs = 40376 pcs

Read more less

1. Applicable types: computer, TV, projector (transmitting mode)/speaker, earphone, car machine, call (receiving mode)2. No need to drive, plug and play3. Bluetooth 5.0 Smart Compatible4. Receive/transmit two-in-one5. 10m transmission signal stability6. Built-in noise reduction HIFI sound quality7. Host size: 42 x 15 x 7.3mm8. Bare metal weight: 13g9. Input voltage: DC5V10. Elastic thread: natural length 45cm, stretched length up to 1M11. Interface: USB, 3.5mmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 12cm * 7cm * 2cm / 4.72inch * 2.76inch * 0.79inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 30cm * 50cm * 50cm / 11.81inch * 19.69inch * 19.69inch Loading Container 20GP: 355 cartons * 500 pcs = 177500 pcs 40HQ: 825 cartons * 500 pcs = 412500 pcs

Read more less

1. Bluetooth version: JL-5.02. Charging: DC 5V3. Battery: 300 mAh4. Working hours: 6 hours5. Charging time: 2 hours6. Output: 3.5MM audio output7. Support automatic search and connection of Bluetooth devices to achieve wireless audio transmission8. Built-in AEC echo cancellation and ANC noise cancellation circuit, gorgeous stereo, more pure sound quality9. Built-in enhanced signal transmission circuit, fast connection, more stable and continuous sound10. Compatible with dual lossless audio formats11. Support AUX IN/OUT12. Automatic memory connection function, easier operation and more convenient connection13. Built-in battery, long battery life14. Smart compatibility, Android, IOS system mobile phones and PAD, and most Bluetooth audio devices15. The product connection is simple, without any tedious driving and downloading APP16. The launch state supports the one-to-one function17. Support stereo in transmit mode18. By connecting with a Bluetooth device (such as a mobile phone), input the audio to other audio devices without Bluetooth function using the AUX interface19. Connect the AUX to the playback device, and transmit the audio to the Bluetooth receiving device (such as a Bluetooth headset) through Bluetooth20. Weight: about 50 grams21. Dimensions: 100x60x25mmSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 434 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 434 pcs = 76818 pcs 40HQ: 412 cartons * 434 pcs = 178808 pcs

Read more less

1. Bluetooth version: 5.0+EDR2. Operating range: 10 meters/33 feet (without obstacles)3. Transmitter mode: red LED light on4. Receiver mode: blue LED light on5. Mode switch: click the button6. The computer is plug and play, no driver, no connection required (only audio can not transmit data)7. Transmission rate: 10Mbps8. Operating frequency: 2400MHz9. Product size: 45x20x9.5mm10. Product net weight: 5 gramsPackaging accessories:- 5.0 Bluetooth Receiver Transmitter x 1- AUX audio cable x 1- Chinese and English manual x 1Specification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 6cm * 4cm * 3cm / 2.36inch * 1.57inch * 1.18inch Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 31cm * 23cm / 18.5inch * 12.2inch * 9.06inch Loading Container 20GP: 795 cartons * 500 pcs = 397500 pcs 40HQ: 1847 cartons * 500 pcs = 923500 pcs

Read more less

1. Bluetooth version: V5.0 + EDR2. Bluetooth protocol: A2DP / AVRCP3. Bluetooth distance: 15 meters4. Interface: RCA / AUX / USB5. Frequency range: 10Hz-20kHz6. Signal to noise ratio: 110dB7. Impedance: 75 ohms8. Support multiple audio output ports: can connect 3.5mm headphones, stereo system, speakers9. Support USB 5V DC output10. System Support: All Bluetooth Audio Devices; NFC Available Devices11. Support NFC mobile phone device touch connection, no need to manually connect12. Barrier-free 15 meters stable transmission, built-in signal antenna13. Dimensions: 109x73x29mmPacking list:NFC Bluetooth Audio Receiver x 1Micro USB charging cable x 13.5mm to RCA cable x 1Audio cable x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 13cm * 10cm * 5cm / 5.12inch * 3.94inch * 1.97inch Qty per Carton 288 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 288 pcs = 50976 pcs 40HQ: 412 cartons * 288 pcs = 118656 pcs

Read more less

1. Bluetooth version: 5.12. Transmission distance: about 15 meters (under barrier-free conditions)3. Interface: 3.5mm audio interface4. Frequency response range: 10Hz-20HKz5. Signal to noise ratio: less than 110dB6. Transmission rate: 3Mbps7. Function: send and receive 2 in 18. Battery capacity: 140mAh9. Weight: about 49 grams10. Size: about 6x2 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 468 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 468 pcs = 82836 pcs 40HQ: 412 cartons * 468 pcs = 192816 pcs

Read more less