Consumer Electronics

1. 95-240V AC, 50/60HZ 2. Control water heating, 5A 3. Built-in sensor 4. Negative display backlight 5. Installation method: cassette

Read more less

Product Introduction 1) This High Accuracy 200000 Lux Digital Light Meter Lux meter LX1330B is new and never used. It is a precise instrument used to measure illuminance in the field, you can use it to measure the illuminance of different locations. With ultra-large screen, easy to read the measured data. Small size, light weight, convenient to carry. Features 1) New and high quality 2) High accuracy and rapid response 3) Data-hold function 4) Unit and sign display for easy reading 5) Holding for maximum measured value 6) Automatic zeroing 7) Meter corrected for luminous, efficiency function 8) Short rise and fall time Specifications 1) Display: 3 1/2 digit LCD display 2) Measuring range: 200, 2000, 20000 and 200000 Lux 3) Over range display: Highest digit of "1" is displayed 4) Repeatability:±2% 5) Temperature characteristic: 0.1%℃ 6) Photosensitive component Si-light Cell attached with light filter 7) Measuring rate: Approximately 2.0 time / sec 8) Power supply: 1 x 9V battery (NEDA 1604 or jls 006P or IEC6F22) 9) Working temperature: 0~40℃,(32°F to 104°F) 0~80%Rh 10) Storage temperature: -10~60℃, (14°F to 140°F) 0~80%Rh 11) Size: 16cm x 7.5cm x 4cm

Read more less

1. Ultrasonic distance measurer 2. Backlit LCD display: 28mm x 16mm 3. Unit of measurement: Feet / Meter 4. Beeps for finish measurement 5. Distance measurement from 0.5m to 18m (2ft to 60ft) 6. With laser pointer function 7. Automatic power off 8. Accurate: +/-0.5% +/- 1cm 9. Resolution: 1cm or 1/2 inch 10. Power supply: 1x 12V 23A Battery (Not included) 11. Laser beam: 1mW 12. Wavelength: 650nm 13. Ultrasonic frequency: 40 kHz 14. Dimensions: 78mm x 70mm x 36mm 15. Weight: 68g

Read more less

Item: SW525A(red light)/SW525B(red light)/SW525G(green light)/SW526A(red light)1. Screen size: 9.6 inch (SW526A 18 inch)2. Measurement range: 30-130dB3. Accuracy: +/-105dB4. Frequency response: 31.5Hz~8.5Hz5. Microphone: 6 mm condenser microphone6. Digital display: 3 digits7. Power supply mode: DC 5V 1A Micro USB interface8. Working temperature and humidity: 0 ~ 40 degrees, 10% ~ 80% RH9. Storage temperature and humidity: -10 to 60 degrees, 10% to 70% RH10. Size: 21 × 13 × 2.8 cm(SW526A: 40×23×3.5cm)11. Net weight: 453 grams(SW526A:1531g)Item: SW535A1. Screen size: 18 inch2. Measurement range: 30-130dB3. Accuracy: +/-1.5dB4. Frequency response: 31.5Hz~8.5Hz5. Microphone: 6 mm condenser microphone6. Digital display: 3 digits7. Power supply mode: DC 5V 2A power supply8. Working temperature and humidity: -20 ~ 60 degrees, 0% ~ 100% RH9. Storage temperature and humidity: -10 ~ 60 degrees, 20% ~ 70% RH10: Alarm prompt: sound + display alarm11. Alarm output: output 5V voltage12. Size: 40 x 23 x 3.5 cm13. Net weight: 1531 grams

Read more less

1. Type: 2 lines of green light 2. Extension Angle: 110 Degrees Horizontal/110 Degrees Vertical 3. Laser Category: Class 2 4. Light source 15 mW 5. Laser wavelength: 510 nm 6. Horizontal/vertical accuracy: +3mm/10m 7. Self-level range: 4 [+1]. 8. Self-level time: <3s 9. Working Distance (Line): 30m, > 40m Cooperative Receiver 10. Operation time: 6 hours (full light) 11. Power Supply: 2 Sections 5 Dry Batteries 12. IP Rating: IP54 13. Operating temperature range: - 10 C to 50 C 14. Storage temperature and time: - 20 C to 70 C 15. Installation Size: 1/4-20 16. Accessories: Packing cartons, black soft packs, 2 dry batteries, PV1 brackets, instructions

Read more less

Features:1. Large LCD, easy-to-read 3.5-inch high-definition display.2. Durable protective shell can prevent impact, friction and collision.3. Non-contact AC voltage detection, top sensor probe design, more securely identify AC voltage.4. The high-resolution large screen can display 3 test results on the screen, including voltage, frequency, and analog bars.parameter:1. Dimensions: 143.4 x 70.9 x 15.7mm2. Display: 9999 times3. Screen: 3.5 inches4. Resolution: 0.11ohms5. S10 power supply: 1.5V (AAA) x 2 (not included)6. S11 power supply: 800 mA lithium battery7. Diode: automatically recognize the diode when it is lower than 3.0V8. DC voltage: 0.8V-620V +/-(0.5%+3), resolution: 0.001V9. AC voltage: 2.2V-620V +/-(0.5%+5), resolution: 0.001V10. Resistance: 1Ω-999.9ohms +/-(2.0%+5), 1kohms-60Mohms +/-(1.0%+3)11. V-Alert (non-contact voltage detection): buzzer alarm sound，on-site inspection: alarm buzzer, LCD screen display stripes12. Continuity: If the resistance is less than 30ohms, the buzzer will sound13. Frequency:- 1Hz-1000Hz +/-(1.0%+5) (ACV:2V-10V); resolution: 0.001Hz- 1KHz-60KHz +/-(1.0%+5) (ACV:10V-620V); resolution: 0.001HzPacking list:S10:S10 Multimeter x 1Test cable x 1Manual x1S11:S11 Multimeter x 1Test cable x 1Type-C charging cable x 1EVA cloth bag x 1Protective shell x 1Manual x1Note: The actual product is subject to the title model, the model machine of the picture is only for effect reference

Read more less

Features:1. The 2000-word automatic range clamp meter with true effective value can accurately test distorted AC voltage and current signals.2. With temperature and non-contact voltage detection, the use environment is expanded.3. Optimize the jaws and increase the position of the meter pen, which is convenient for one-handed operation.4. Optimize the position of the jack, better safety and beauty, and reduce the entry of dust and foreign objects.5. Added a back buckle for easy carrying6. AC current measurement (2A/200A) resolution 1mA7. AC and DC voltage measurement (600V)8. Resistance, continuity, diode measurement9. V ~alert dangerous voltage alarm10. Temperature test11. Data retention, background lightparameter:1. Display: 2000 words2. DC current: 2A/ 20A/ 200A/0.01A/0.001A+/-0.1 (2.5% + 5 words)3. DC voltage: 2V/20V/200V/600V/0.001V/ 0.01V /0.1V /1V (1.0%+ 3 words)4. AC voltage: 2V/20V/200V/600V/0.001V/ 0.01V /0.1V /1V (1.0% + 3 words)5. Buzzer: If the resistance of the tested circuit is less than 30 ohms, the buzzer in the meter will sound a continuous alarm.6. Temperature: -20~ 500 degrees Celsius/-4-932 degrees Fahrenheit/1 degrees Celsius/2 degrees Fahrenheit (2.0% + 2 words)7. Clamp head size: 20mm8. Battery type: 1.5V AAA battery × 2 (not included)

Read more less

1. High-precision clamp head design, used for AC and DC high current measurement, input current: 100A2. The two-line display on the screen can display AC voltage, current and frequency at the same time3. The bottom dual input jack design, all functions are shared, convenient, fast and beautiful4. The single-sided meter pen storage card position is convenient for operation in any environment, and is highly efficient5. The back buckle hook design can be hung on belts, trouser pockets, pockets, and can be hung on a lanyard and neck6. Detection mode One-handed operation voltage detection, zero fire line discrimination7. V ~alert dangerous voltage alarm8. AC and DC voltage measurement (600V)9. Frequency measurement of AC and DC current: 100A10. Display: 6000 counts11. Clamp head size: 20 mm12. Battery: 3 x 1.5 V AA batteries (not included)13. Dimensions: 179 x 67 x 36 mmPacking list:1. Clamp meter x 12. Cloth cover x 13. K-type temperature probe x 14. Test lead x 1 pair5. Manual x 1

Read more less

1. Weight: About 400g2. Size: About 43x10 cm3. Material: ABS4. Alarm mode: Vibration5. Power supply: 9V battery (need to buy by yourself)6. Waterproof depth: 100 feet7. Scope of application: Public security inspection, police inspection, diving and salvage, professional archeology, etc.8. Detection environment: Any environment in grass, mud, dust, sand, black sand, fresh water or sea waterFeatures:1. Beautiful and practical, light and portable, easy to use2. Vibration and blue light alarm3. Automatic adjustment, good stability4. Tilt switch system, simple and convenient5. Sealed and waterproof, sturdy structure, durable6. With low battery indicator, built-in low battery sensor

Read more less

Product parameters:1. The sensitivity distance of detecting a dollar coin is ≥5cm.2, detection method: vibration, sound alarm2, power: 9V battery (not included)3, working environment: temperature -20 ° C -60 ° C4. Dimensions: 215.5*41.5*43.52mm5, packaging size: 25.5 * 6 * 6cm6, Pcs / Carton : 50pcs / box

Read more less

1. Sensitivity: A25-cent coin (60mm) 2. Iron pipe-tube in 20 to 120mm 3. Operating frequency: 35KHz 4. Operating current: Less than 8mA 5. Power supply: 6F22 9V battery 6. Low battery indicated 7. Alert: Audio & LED light 8. Tuning: Automatic 9. Temperature environment: -10 ~50 degree C 10. Dimension: 420 x 80 x 40mm 11. Weight: 450g

Read more less

1. Pocket size, portable and handling 2. Test without damage, convenient and accurate operation 3. Work power: DC 9V charger (US/EU optional) or battery (battery not included) 4. Size: 164 x 48 x 22mm 5. Weight: 80g

Read more less

1. Recording format: WAV, MP32. Recording time: 20000 (minutes)3. Video: Does not support video shooting4. Product size: 100x21x8MM5. Material: aluminum titanium alloy + back clip design6. Using three-microphone dynamic noise reduction technology, the recording distance can be increased to 100 meters (specific environment test), high-definition recording Chinese display, to meet your work needs7. DSP acoustic noise reduction, Intel high-speed flash memory chip, save recording files quickly8. Digital encryption makes recording files more secure9. Intelligent voice control, you can set the recording time and start recording intelligently10. Other functions: support multi-music format playback/record while charging/monitor recording/save when power off/delete files11. Packing list: earphone, data cable, manual

Read more less

Product parameters: 1. Echo, scene 99142 2. One key operation, separate video, separate recording 3. 1080P/720P 30 frame 4. Duration: video recording for about 3 hours, pure recording for 10 hours (can be recorded while filling), 560 ma.Support side charge edge record 5. Product color: Black

Read more less

Features1. Built-in 250mAh battery, use time 25h. 2. One-key recording, with LCD recording indicator, easy to operate. 3. 6 recording modes, 3D sound effects, support voice activation function (VAR). 4. Support loop/A-B repeat/pause/delete. Equipped with a telephone adapter to support telephone conversation recording. 5. Small pocket size, good as MP3 music player. 6. Built-in microphone and speaker, with external microphone and earphone.Specification1. Recording format: WAV format 2. Recording power: 0.8mA-12mA 3. Recording sampling rate: 8KHz/16KHz/48KHz 4. Recording bit rate: WAV (32/128/192/384Kbps) 5. Music playback format: MP3, WAV 6. Headphone jack: 3.5pie stereo jack 7. Headphone output: (L) 9mW???(R) 9mW (32Ohm) max 8. USB interface: MICRO-Mike 5P/DC5V-300MAh 9. Storage: Embedded Flash 10. Built-in speaker output: 800mW 11. Built-in speaker: 8R/0.5W diameter 26 12. Built-in MIC: Omni-directional capacitor MIC 13. Display: 1.0 inches 14. Distortion: 90dB 15. Signal to noise ratio: 0.06% 16. Operating temperature: -10 to 40 degrees Celsius 17. Body weight: 32.5g (bare metal) 18. Body size: 85mm??36mm??14mm 19. Power supply mode: lithium battery/3.2-4.2V 20. Battery type: LiCoO2 21. Battery capacity: 250MAh 22. Battery weight (g): 4g 23. Watt hours per battery: 0.81wh 24. Lithium content: 0.066g 25. Battery size: 3.5mm x 14mm x 55mm 26. Battery life: about 30 hours of recording, about 6 hours of playback (plug in headphones) 27. Support system: Windows XP&Vista/2K/ME/98 (driver installation required) /Mac OS 10Package listRecorder x 1 Headphone x 1 Microphone x 1 USB cable x 1 Telephone adapter x 1 Telephone line cable x 1 Audio cable x 1 User Manual (English) x 1

Read more less

Features1. Separated recording & playing keys: one key for recording, one for playing 2. VOR system: Voice Operated/ Activated recording (Automatically starts recording when there is sound and pauses when there is no sound.) 3. Four recording modes: * "SP" for high quality recording voice without distorting. * "LP" for long time recording * "SP VOICE" for high quality recording under voice activated recording * "LP VOICE" for long time recording under voice activated recording 4. Sleek appearance design and comfortable touch 5. Recording telephone conversation 6. Connect the recorder with the telephone via telephone adapter; the recorder can record telephone conversation 7. Support multiple audio format, such as MP1, MP2, MP3, WAV 8. No need USB driver 9. 8GB Digital Voice Recorder Pen with MP3 Function. Normal pen with rechargeable refill. Supports MP3, WMA, ASF, and WAV music formats. Long time voice recording.Specifications1. Memory: 8GB 2. With LCD display 3. Built-in speaker 4. Music playing function 5. 128X64 lattice screen 6. Different languages 7. Recording indication 8. Sound control function (VOR) available 9. 7RQ modes: NOP, ROCK, POP, CLASSOL, SOFT, JAZZ and DBB 10. Power supply: 2 x AAA battery (not included) 11. Battery low power indication 12. Working temperature: 0~40 Celsius

Read more less

1.Supports translation in more than 70 languages. 2.Smart speech recognition technology makes it easy to communicate between languages, and it will be translated into text and displayed on mobile phones, providing readability for voice text translation and replacement for Android 4.3 or replacement for iOS 7.0 .3.Connected to the phone via Bluetooth, the wireless transmission distance is up to 10 meters and the voice recognition distance is 2 meters. Then start real-time translation, which is more suitable for lecture learning for business travel purchase.4.Built-in 3.7V 800mAh rechargeable battery, low power consumption. Can be used as a Bluetooth speaker with HIFI recording sound quality to playback sound.5.Small size and easy to carry. The Translator is ideal for learning, making friends, doing business, shopping, and traveling abroad.

Read more less

1.Supports reciprocal translation of more than 40 languages. The translator responds with an accuracy of 99%. English, Chinese, French, German, Russian, Dutch, Greek, Portuguese, Japanese, Swedish, Spanish, etc.2.Intelligent voice recognition technology to facilitate communication between languages, it will also be translated into text and displayed on the phone, providing readability for voice text translation, AND compatible with Android 4 , 3 or IOS 7.0.3.Connect to your phone via Bluetooth, allow a wireless transmission distance of up to 10 meters, and the distance of speech recognition is 2 meters. Then start real-time translation, which is more suitable for Meeting learning travel shopping business.4.Built-in 3.7V 800mAh rechargeable battery, low power consumption, plug and charge easily. It can be used as a Bluetooth speaker with HIFI recording sound quality while the sound is playing.5.Small Volume and easy to carry. The translator device very suitable for studying, making friends, doing business, shopping, traveling abroad. And it is a good gift for yourself or your friends.

Read more less

About The Product1. 6 port stereo speaker selector amplifier switch switcher 2. The speaker switcher allows the user to connect multiple pairs of speakers to a single stereo receiver or amplifier or vice versa to multiple amplifiers/receivers of a single speaker pair. 3. The device has a convenient button terminal that can accept up to 12 AWG speaker lines. 4. Note: this speaker switch does not allow multiple speaker pairs to be selected simultaneously. Only one pair of outputs can be selected at a time. 5. This speaker selection can also be used in the opposite way, imagine having multiple amplifiers connected to a speaker pair for setting. Because each stereo amplifier has its own sound characteristics, the user can connect different power amplifiers to the switch and then output to the same speaker pair. 6. Connect multiple speakers to an audio amplifier/receiver as loudspeakers to select a pair of speakers at a time. 7. Connect multiple amplifiers/receivers to a pair of speakers as an amplifier selection to select one amplifier/receiver. 8. The high-current amplifier protection circuit allows up to 6 pairs of speakers to be connected without damaging the amplifier. The protection circuit can safely protect unselected amplifiers or loudspeakers. 9. Select each time with a manual button on the front panel. Independent left/right channel grounding path, are compatible with all stereo amplifiers.Features1. Use convenient button terminal, can accept up to 12 AWG loudspeaker wires. 2. Supports up to 100 watts of amplifier power and 4 to 16 ohms of all types of speakers. 3. Sturdy, luxurious steel metal case and good shielding. 4. Independent left and right channel grounding path-in-type push-in terminal. 5. No external power supply is required. 6. Rated power: 100 watts per channel.

Read more less

Product function introductionA977 passive preamp active speaker volume dual-channel controller is small in size and suitable for active speakers or preamp/post-amp, it supports full-balance or input and output of single-ended signal. The product has functions of independent L/R channel volume adjustment, 2 signals input and 2 signals output. It provides balanced XLR and unbalanced RCA connectors which are automatically converted to each other, with a selector switch facilitates the signal switch of input/output.Small size, big intelligence. The product is of small size, but has well-function connecters. It is suitable for decoders and speakers without volume adjustment. the product has the design of balanced input/output and RCA input/output architecture, with switching function. The operation of the product will not cause loss of signal source. Generally, the audio signal released from the decoder is the original sound source signal. Great dynamics will not cause loss of sound quality, retaining the complete original signal source.Product parametersInput/output impedance: 10KΩ - 50KΩ2 in 2 out switchover, unbalanced RCA connector and balanced XRL connector for input/outputInput: unbalanced RCA connector / balanced XLR connector (convert selection)Output: unbalanced RCA connector / balanced XLR connector (convert selection)Product net weight: 0.32 kgProduct package weight: 0.42 kgProduct dimensions: length 145mm X width 65mm X height 43mmPackaging dimensions: length 200mm X width 180mm X height 55mmKit list1 X A977 2 In and 3 Out Switcher Full-balance Passive Preamp Active Speaker Double Sound Source Volume Controller

Read more less

Product Functions1. A977 passive preamp active speaker volume dual-channel controller is small in size and suitable for active speakers or preamp/post-amp, it supports full-balance or input and output of single-ended signal. The product has functions of independent L/R channel volume adjustment, 2 signals input and 2 signals output. It provides balanced XLR and unbalanced RCA connectors which are automatically converted to each other, with a selector switch facilitates the signal switch of input/output.2. Small size, big intelligence. The product is of small size, but has well-function connecters. It is suitable for decoders and speakers without volume adjustment. the product has the design of balanced input/output and RCA input/output architecture, with switching function. The operation of the product will not cause loss of signal source. Generally, the audio signal released from the decoder is the original sound source signal. Great dynamics will not cause loss of sound quality, retaining the complete original signal source. Specification1. Input/output impedance: 10KΩ - 50KΩ2. 2 in 2 out switchover, unbalanced RCA connector and balanced XRL connector for input/output3. Input: unbalanced RCA connector / balanced XLR connector (convert selection)4. Output: unbalanced RCA connector / balanced XLR connector (convert selection)5. Product net weight: 320g6. Product dimensions: length 145mm x width 65mm x height 43mm

Read more less

B015 – Front Stereo Signal Amplifier Booster Headphones Speaker Amplifier Headset Dual-Audio SourceProduct description:You have a line level signal source (TV audio, MP3 player, Video game, mobile phone, tablet, computer, record player), but desire louder sound or bigger volume?A powerful signal amplifier receiver or volume control, you may need a long line connecting TV audio and the receiver on the other side of the room to provide high gain through any line level signal source, allowing longer cable operation or requiring “buffer” to amplify the lower volume. You may use it between the line level signal source and power amplifier as a signal amplifier, 3.5mm + RCA port matches almost all product interfaces.The product improves the sound amplification and reduces ground noise by controlling the signal, and it has large dynamic range without produce cracking. It controls output volume through a sensitive volume knob, the output of the headphone interface can drive 16Ω-600Ω headsets, and uses AC9V transformer for power supply to ensure full power.Product parameters:Input impedance: 100K OhmMaximum input level: +14 dBVOutput impedance: 47 Ohm of each output channelFrequency response: 20 Hz – 20K HzSignal to noise ratio: > 107dBTotal harmonic distortion: < 0.08%Intermodulation distortion: < 0.01%Input port: stereo 3.5mm socket and RCA portOutput port: stereo 3.5mm port and RCA portPower supply: AC9VNet weight: 0.51 kgGross weight with packaging: 0.61 kgProduct size: length 109 mm X width 79 mm X height 39 mmPackaging size: length 185mm X width 135mm X height 65mmKit list:1 X stereo signal preamplifier booster dual-audio source headphone amplifier1 X AC9V power adapter (AWG) line length 100cm

Read more less

B016 – 6 Input 1 Output Audio Signal Source Selection Switcher, Output Volume Adjustment Control RCA PortProduct description:6-channel stereo audio signal selection switcher with output volume adjustment function,The product adopts passive design, direct insertion, and has lossless switched transmission of input and output signals,The product is mainly used to select and switch among a variety of stereo signal input and output through a common set of equipment, that is, a variety of stereo signal sources of devices, such as TV audio, MP3 player, CD player, video game, mobile phone, tablet, computer, record player, need to be output on the amplifier or on active speakers,The 6-channel audio signal selection switcher solves complicated line plug in and plug out, which uniformly connects device input signal sources to the switcher for easily selection.The product uses standard RCA port design for input and output, and uses precise 6-level manual switch design for the switcher, with independent stereo volume adjustment control.Product parameters:Power supply: passive design, direct insertionMaterial: all-metal caseInput and output impedance: 10KΩ - 50KΩFrequency response: 20 – 20kHzDistortion: <0.002%Insertion loss: <0.01dBSignal gain: 0dBSignal to noise ratio S/N: >98dBInput port: standard RCA portOutput port: standard RCA portNumber of input channels: 6-channel stereo input signal sourcesNumber of output channels: 1-channel stereo outputControl switch: 6-level precise manual selection switchSwitching channel: 6 channelsNet weight: 0.25 kgGross weight with packaging: 0.35 kgProduct size: length 113 mm X width 50 mm X height 38mmPackaging size: length 185mm X width 135mm X height 65mmKit list:1 X 6 input 1 output stereo audio signal selection switcher, output volume adjustment RCA port

Read more less

B026 – 6 Input 2 Output Or 2 Input 6 Output Audio Signal Source Selection Switcher RCA PortProduct description:6 input 2 output or 2 output 6 input stereo audio signal selection switcher, with RCA port designThe produce adopts passive design, with direct insertion, and has lossless switched transmission of input and output signals,The product is mainly used to select and switch among a variety of stereo signal input and output through a common set or multiple sets of equipment, that is, a variety of stereo signal sources of devices, such as TV audio, MP3 player, CD player, video game, mobile phone, tablet, computer, record player, need to be output on the amplifier or on active speakers,The 6-channel audio signal selection switcher solves complicated line plug in and plug out, which uniformly connects device input signal sources to the switcher for easily selection.The product uses standard RCA port design for input and output, and uses precise 6-level and 2-level manual switch design for the switcher, Product parameters:Power supply: passive design, direct insertionMaterial: all-metal caseInput and output impedance: 10KΩ - 50KΩFrequency response: 20 – 20 kHzDistortion: <0.002%Insertion loss: <0.01dBSignal gain: 0dBSignal to noise ratio S/N: >98dBInput port: standard RCA portOutput port: standard RCA portNumber of input channels: 6-channel stereo input (reverse 6-channel switched output)Number of output channels: 2-channel stereo output (reverse 2-channel switched input)Control switch: 6-level and 2-level precise manual selection switchInput switching channel: 6 channelsOutput switching channel: 2 channelsNet weight: 0.26 kgGross weight with packaging: 0.37 kgProduct size: length 122 mm X width 50 mm X height 38 mmPackaging size: length 185mm X width 135mm X height 65mmKit list: 1 X 6 input 2 output or 2 input 6 output stereo audio signal selection switcher RCA port

Read more less

1. Size: About 23x15x6 cm2. Weight: About 850 grams3. Power: 18+18W4. Voltage: DC12V/AC220V5. Material: Aluminum alloy panel6. Function: Built-in Bluetooth, can insert U disk, TF card, FM radio7. Features: Support MP3 format, use HIFIF audio amplifier chip, sound quality mellow and sweet, equipped with infrared remote control, high-DC dual-purpose power supply, wide applicability, simple operation, durable8. Note: The remote control contains a button battery

Read more less

Product presentation:1. Support power is 200 watts: 1 and 2 power amplifiers with 1 pair of speaker selector switches, ideal for home theater sound systems, power of 200 watts per channel, suitable for 4–16-ohm impedance speakers, with a compact thin desktop design, compatible with any home theater setting.2. AMPC Amplifier Control: The two-channel speaker switcher controls the stereo connection between two amplifiers and a set of speakers, or the combination connection switch selection, input/output through the screw-type connector terminals, which accept 14AWG speaker wire.3. Independent audio control: With independent audio source channel volume control. The button design allows you to individually select each amplifier to customize your home listening experience, and the volume switch controls the volume adjustment of the output speakers.4. Simple installation: The enjoyment of quality audio performance requires connecting the left and right channel outputs of the amplifier to the left/right and 1/2 amplifier inputs with 1 on 2 speakers on a mini dual channel controller.5. Overload protection: Equipped with a front panel control switch consisting of volume control knob and amplifier switch.Provide high quality audio and overload safety protection circuits and long-term reliability.Product Parameter：1. 2 input 1 output amplifier speaker selector switcher2. Convenient audio control accommodates 2 amplifiers with 1 pair of speakers.3. Home theater stereo amplifier system support, independent audio source channel volume control4. Input/output: screw type connector terminal, compact desktop/desktop mini design5. Front panel button control center, the product needs no power supplyBuilt-in electronic overload protection circuit6. Power processing: 200 watts per audio/speaker channel7. Speaker selector type: 2 soundtracks8. Speaker cable support: 14 wire gauge (14 AWG)9. Support impedance: 4-16 ohms10. Frequency response: 20Hz-20kHz11. Net Weight: 1.06 kg12. Packed weight: 1.21 kg13. Product size: Length 160mm x Width103mm x Height 55mm14. Package size: Length 260mm x Width 185mm x Height 65mm15. Kit list: 2 input 1 output amplifier speaker switcher output with volume adjustment function x 1

Read more less

Features: The output of 4 groups of speakers can be divided into 4 zone switch control, each group of speakers can independently select A and B power amplifier output, and each group of speaker output can independently turn on and off the function.Do you have 2 power amplifiers and 4 sets of speakers that need to be connected to each other?Do you need 2 amplifiers and 4 sets of speakers to get stuck?A powerful amplifier and audio switcher can solve these problems,1. 2 power amplifiers push-button select switch input,4 sets of stereo speakers push-button select switch output (4 sets of speakers can be opened or closed independently)2. Sets of stereo speakers can sound at the same time, you can also turn off one group of speakers or more groups of speakers individually, manually select the pushbutton switch3. The maximum power of each channel is 300W4. Signal input provides vacuum tube power amplifier signal no-load protection function5. Manual selection of input and output switching, straight plug straight use, switching signal stability, between channels will not produce another dry close or noise6. Compact design of solid metal shell, easy installation, the product does not need external power7. Simple installation: input and output plug and play easy installation, you can enjoy different audio experienceProduct Parameter:1. Compatible with all types of power amplifiers and speakers2. Input/output accepts heavy-duty speaker wire or speaker pin wire through the terminal port3. Connect the power amplifier to amplifier A and B4. Connect the loudspeaker to position 1-2-3-4 respectively5. Turn on your power amplifier stereo device and the product requires no external power supply6. Input: 2 sets of inputs (banana plug)7. Output: 4 sets of output (banana plug)8. Power: up to 300W9. Metal material, fine steel housing, compact size suitable for any system10. Channel Power: Each channel supports up to 300W of power11. Frequency response: 10Hz-50KHz12. Product size: length 240mm X width 105mm X height 55mm13. Net weight :0.92 kg14. Kit list: 1 x 2 input 4 output power amplifier switch distributor

Read more less

1. Portable USB powered Mug heater - Keep the morning coffee hot at your desk while you work, or keep a cup of hot tea steamy while you relax on the couch. 2. Decorative warmer cup use for coffee, tea, hot cocoa, Soup, water, milk and more. (note: cannot be used to heat up beverages, just used to keep it warm). 3. Cute cookie designed for mug warmer, lightweight and portable, easy to tote and take anywhere. 4. One button operation, just follow simple 3 steps, first connect the USB cord to your computer or any USB port in order to get power resources. Then, place your cold cup on the warmer mat. Finally press the ON button to keep the cup warm and enjoy your hot drinks.

Read more less

1. No electricity or battery,powered by heat. Healthy and economical! Stove fan for log burning fireplaces, gets power from the heat produced by your fireplace, wood-burning stove or pellet stove. Effectively dispersing warm air around your room. 2. The hotter the surface of the furnace, the more air the fan circulates. 3. Over-temperature protection: When the temperature reaches 350 degrees Celsius, the metal shrapnel on the bottom will lift the fan to protect the fan motor from damage! 4. Save your bill, more efficiency: Fully utilize the heat from your wood stove and disperse it to your room. 5. Low noise! You will enjoy the warm air in a quiet and comfortable environment. 6. Parameters: Material: Alumina Blade: 5 leaves Working temperature: 60-350 degrees Celsius

Read more less

1. To save fuel, the fan distributes heat from the furnace to provide better fuel efficiency. 2. Generate electricity by yourself, no plug, no battery; 3. Operation is quiet. 4. Start by yourself, adjust the speed and stop. 5. Simple, stylish design. 6. Parameters: Air volume: 160-210 Wind speed: 1200rpm Number of leaves: 3 leaves Noise: 25dB Working temperature: 60-350 degrees Celsius Material: Alumina

Read more less

1. Material: PVC,ABS 2. Perfect for outdoor activities,sporting events,traveling 3. Fine mist spray can, if in the water with ice, the more extremely cool! Transient increase in air humidity, effectively and quickly reduce body temperature 4. Requires two AA batteries(not included) 5. Easy to carrying 6. Size: 26.5 x 9.5 x 0.7cm

Read more less

1. Material: ABS+PP+ electronic components2. Weight: 75 grams3. Battery capacity: 800 mA4. Charging time: 2-3 hours5. Input voltage: DC5V 1A6. Use power: 2W7. Dimensions: 150x80x25 mm8. Wind speed: 3 gears9. Switch type: piano button10. Carabiner design, hanging placement, convenient to travel11. Long battery life, with 7 color lights

Read more less

1. Load-reducing structure design, comfortable and lightweight. 2. Halter/desktop/handheld three-in-one, easy to carry. 3. Adjust the air supply 180 degrees to meet different needs. 4. Built-in 3000mAh high-capacity battery, 8 hours of long-lasting battery life. 5. It can be used to charge mobile phones and is convenient to go out. 6. Three levels of wind power can be adjusted, soft/powerful switching at will. 7. It can be used as a mobile phone holder. 8. Parameters: Battery capacity: 3000mAh Battery voltage: 3.7V Gear position: 3 gears Use time: 4-12 hours Charging time: about 4 hours

Read more less

1. Load-reducing structure design, comfortable and lightweight. 2. Halter/desktop/handheld three-in-one, easy to carry. 3. Adjust the air supply 180 degrees to meet different needs. 4. Built-in 3000mAh high-capacity battery, 8 hours of long-lasting battery life. 5. It can be used to charge mobile phones and is convenient to go out. 6. Three levels of wind power can be adjusted, soft/powerful switching at will. 7. It can be used as a mobile phone holder. 8. Parameters: Battery capacity: 3000mAh Battery voltage: 3.7V Gear position: 3 gears Use time: 4-12 hours Charging time: about 4 hours

Read more less

1. Load-reducing structure design, comfortable and lightweight. 2. Halter/desktop/handheld three-in-one, easy to carry. 3. Adjust the air supply 180 degrees to meet different needs. 4. Built-in 3000mAh high-capacity battery, 8 hours of long-lasting battery life. 5. It can be used to charge mobile phones and is convenient to go out. 6. Three levels of wind power can be adjusted, soft/powerful switching at will. 7. It can be used as a mobile phone holder. 8. Parameters: Battery capacity: 3000mAh Battery voltage: 3.7V Gear position: 3 gears Use time: 4-12 hours Charging time: about 4 hours

Read more less

1. Strong cool breeze, humidify and nourish, and quickly cool down. 2. Three speeds to meet different needs. 3. The air is quiet and gentle, caress and sleeps peacefully. 4. 2000mAh, long battery life of 3 hours. 5. Adjustable air outlet, enjoy the cool breeze freely. 6. Air duct safety protection, not afraid of hand injury from fan blades. 7. Parameters: Wind speed: 3 gears Battery life: 3 hours Charging time: 3-4 hours Water tank capacity: 100ML

Read more less

Feature:1. Three levels of wind volume: weak wind>natural wind>strong wind. The wind on the left and right sides is even.2. No wing design, you dont have to worry about your hair being caught by the fan blades.3. Equipped with 2600 mAh battery, brand new upgrade, continuous use time can reach 8-18 hours (depending on speed)4. The neck fan has 46 ventilation holes to keep the face cool and keep makeup. A 360-degree refreshing experience, safe for children and adults to use.5. Packing list:1x hands-free personal fan1x USB charging cable1x user manual

Read more less

1. Made of high quality metal material, durable to used. 2. Install your precious LCD Monitor or photo flame with confidence. 3. Metal construction provides safety loading the device. 4. Simple design, easy for installation. 5. Suitable for below 18.5 inch LED LCD Flat Screen Monitor or photo frames.

Read more less

1. 12.1 inch LED display, 16:9, 1280*800 pixel resolution 2. Front dual stereo speakers audio output 3. Support SD, MMC card up to 16GB(not included) 4. Video play support 720P, AVI RMVB MP4 format, audio play support MP3, WMA format, support JPEG images 5. Support USB 1.1 or USB 2.0 port 6. Support image browsing with background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Time clock, calendar, alarm clock, time switch 9. Output interface: Earphone output port 10. Control modes: Manual, remote control or boot automatically play 11. External power supply: AC 100-240V DC 12V 1A

Read more less

1. 12.1 inch LED display, 16:9, 1280*800 pixel resolution 2. Front dual stereo speakers audio output 3. Support SD, MMC card up to 16GB(not included) 4. Video play support 720P, AVI RMVB MP4 format, audio play support MP3, WMA format, support JPEG images 5. Support USB 1.1 or USB 2.0 port 6. Support image browsing with background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Time clock, calendar, alarm clock, time switch 9. Output interface: Earphone output port 10. Control modes: Manual, remote control or boot automatically play 11. External power supply: AC 100-240V DC 12V 1A

Read more less

1. 15-inch LED display, 4:3, 1024 * 800 pixel resolution 2. Front dual stereo speaker audio output 3. Support SD, MMC card up to 16GB (not included) 4. Video playback supports 1920*1080P, AVI, PMP, MP4 format, audio playback supports MP3, WMA format, supports JPEG images 5. Support USB 2.0 port 6. Support image browsing using background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Clock, calendar, alarm clock, time switch 9. Output interface: headphone interface output 10. Control mode: manual, remote or power on auto play 11. External power supply: AC 100-240V DC 12V 1A 12. Product size: 33x26cm

Read more less

1. 15-inch LED display, 16:10, 1280 * 800 pixel resolution 2. Front dual stereo speaker audio output 3. Support SD, MMC card up to 16GB (not included) 4. Video playback supports 1920*1080P, AVI, PMP, MP4 format, audio playback supports MP3, WMA format, supports JPEG images 5. Support USB 2.0 port 6. Support image browsing using background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Clock, calendar, alarm clock, time switch 9. Output interface: headphone interface output 10. Control mode: manual, remote or power on auto play 11. External power supply: AC 100-240V DC 12V 1A

Read more less

1. 17-inch LED display, 16:10, 1440 * 900 pixel resolution 2. Front dual stereo speaker audio output 3. Support SD, MMC card up to 16GB (not included) 4. Video playback supports 1920*1080P, AVI, PMP, MP4 format, audio playback supports MP3, WMA format, supports JPEG images 5. Support USB 2.0 port 6. Support image browsing using background music (MP3) function 7. Support multiple languages: Chinese, English, French, German, Italian, Spanish, Portuguese, Dutch, Polish 8. Clock, calendar, alarm clock, time switch 9. Output interface: headphone interface output 10. Control mode: manual, remote or power on auto play 11. External power supply: AC 100-240V DC 12V 1A

Read more less

4K hd player is powered on and automatically plays video, pictures, music, video supports power off memory playbackIt can be connected to 4K TV, projector, monitor (HDMI to VGA conversion head can be used), new and old TV, and splicing screen.Support 4K full hd 4096X2160P resolution below, MP4, MKV, TS, M2TS, MTS, TP, TRP, WMV, IFO, ISO, VOB, DAT, AVI, MPG, MOV, RM, RMVB, DIVX, XVID, FLV, F4V, blue and other formats, support PPT presentation.Image: supports JPG, BMP, PNG, GIF, TIFF and other formats.Audio: DTS lossless music, PCM, AC3, MP3, FLAC, WMA, AAC, WAV, etc4K hd single player, power on and play, U disk SD card playSupport HDMI+AV+USB+MiniSD, decoding h. 265/ h. 264 videoFunction introduction:1. This machine is suitable for home video and audio playback and commercial demonstration, and supports automatic loop video playback when powered on;2. Turn on the power and automatically play pictures with background music; Power on and automatically play music files.3. Supports playback of video, music, pictures and files in external usb disk, portable hard disk and MiniSD card4. Supports 4K 10bits h. 265/ h. 264 video decoding5. Supports 1080P multiformat video decoding (vc-1, mpeg-1/2/4, VP8)6. Supports 1080P video encoding, h. 264 and VP8 format7. HDMI2.0 supports 4K 60Hz display and supports HDCP 1.4/2.28. Interface: HDMI2.0/CVBS/2 USB/MiniSD/IR interface9. Power supply specification: 100-240v, 50/60hz access.10. Power supply mode: external adapter,5V power access11. Main engine size: 8*7.8*1.5cm; Weight of main engine: 99g; Total weight: 420g (including accessories)12. Video broadcast formats: FLV, MPEG, AVI, MKV, 3 gp, MP4, WMV, MOV, MPG, DAT, TP, TRP, TS, M2TS, etc13. Audio playback format: MP3,AAC,WMA,WAV,APE, etc14. Image playback format: JPG/JPEG/BMP/GIF/PNG, etc15. System language: English/simplified Chinese/traditional Chinese/German/Spanish/French/Portuguese/Italian/Dutch, etcNote: due to differences in coding and compression software, the above files in the same format may not be fully supported.

Read more less

4K hd player is powered on and automatically plays video, pictures, music, video supports power off memory playbackIt can be connected to 4K TV, projector, monitor (HDMI to VGA conversion head can be used), new and old TV, and splicing screen.Support 4K full hd 4096X2160P resolution below, MP4, MKV, TS, M2TS, MTS, TP, TRP, WMV, IFO, ISO, VOB, DAT, AVI, MPG, MOV, RM, RMVB, DIVX, XVID, FLV, F4V, blue and other formats, support PPT presentation.Image: supports JPG, BMP, PNG, GIF, TIFF and other formats.Audio: DTS lossless music, PCM, AC3, MP3, FLAC, WMA, AAC, WAV, etc4K hd single player, power on and play, U disk SD card playSupport HDMI+AV+USB+MiniSD, decoding h. 265/ h. 264 videoFunction introduction:1. This machine is suitable for home video and audio playback and commercial demonstration, and supports automatic loop video playback when powered on;2. Turn on the power and automatically play pictures with background music; Power on and automatically play music files.3. Supports playback of video, music, pictures and files in external usb disk, portable hard disk and MiniSD card4. Supports 4K 10bits h. 265/ h. 264 video decoding5. Supports 1080P multiformat video decoding (vc-1, mpeg-1/2/4, VP8)6. Supports 1080P video encoding, h. 264 and VP8 format7. HDMI2.0 supports 4K 60Hz display and supports HDCP 1.4/2.28. Interface: HDMI2.0/CVBS/2 USB/MiniSD/IR interface9. Power supply specification: 100-240v, 50/60hz access.10. Power supply mode: external adapter,5V power access11. Main engine size: 8*7.8*1.5cm; Weight of main engine: 99g; Total weight: 420g (including accessories)12. Video broadcast formats: FLV, MPEG, AVI, MKV, 3 gp, MP4, WMV, MOV, MPG, DAT, TP, TRP, TS, M2TS, etc13. Audio playback format: MP3,AAC,WMA,WAV,APE, etc14. Image playback format: JPG/JPEG/BMP/GIF/PNG, etc15. System language: English/simplified Chinese/traditional Chinese/German/Spanish/French/Portuguese/Italian/Dutch, etcNote: due to differences in coding and compression software, the above files in the same format may not be fully supported.

Read more less

Function introduction:1. This machine is suitable for home video and audio playback and commercial demonstration, and supports automatic loop video playback when powered on;2. Turn on the power and automatically play pictures with background music; Power on and automatically play music files.3. Support to play external U disk, mobile hard disk,SD card video, music, pictures, files4. Supports 4K 10bits h. 265/ h. 264 video decoding5. Supports 1080P multiformat video decoding (vc-1, mpeg-1/2/4, VP8)6. Supports 1080P video encoding, h. 264 and VP8 format7. HDMI 2.0 supports 4K 60Hz display and supports HDCP 1.4/2.28. Interface: HDMI2.0/CVBS/2 USB/SD/IR interface9. Power supply specification: 90-230v, 50/60hz access.10. Power supply mode: external adapter,5V power access11. Main engine size: 82*73*19cm; Weight of main engine: 88g; Total weight: 420g (including accessories)12. Video broadcast formats: FLV, MPEG, AVI, MKV, 3 gp, MP4, WMV, MOV, MPG, DAT, TP, TRP, TS, M2TS, etc13. Audio playback format: MP3,AAC,WMA,WAV,APE, etc14. Image playback format: JPG/JPEG/BMP/GIF/PNG, etcSystem language: English/Chinese simplified/traditional/German/Spanish/French/Portuguese/Italian/Dutch and other languagesNote: due to differences in coding and compression software, the above files in the same format may not be fully supported.

Read more less

1. Fully compatible with AVI EVD DVD, SVCD, VCD, CD, CD-R/RW, and MPEG-4 and other formats of discs and JPG picture formats. Full region code DVD (discs are not restricted by region code);2. 7-inch clear LCD display 16:9 widescreen, 270-degree rotation, suitable for various playback environments, you can watch it as you want!3. TV function. It has a cable TV signal interface, which can preset hundreds of channels, and can easily receive cable and wireless TV signals (wireless viewing depends on the strength of the local signal).4. Support game function5. AV output function: you can connect this machine to a TV to watch DVD blockbusters; you can also connect audio to a high-end audio system to enjoy the shocking effects of music!6. AV input function: external video, such as camera or ordinary DVD, etc.7. With a high-speed USB interface, it can be connected to a mobile hard disk U disk. It is convenient to download movies and music to play on this machine.8. The built-in card reader can directly read movies, music, photos, etc. stored in the SD/MS/MMC card.9. Built-in DOLBY and DTS dual decoding function, smooth to the end.10. Super strong electronic anti-vibration circuit. (DVD 3 seconds, CD/VCD 10 seconds, MP3 90 seconds)11. Built-in 3D sound effect processing, support FM radio function12. Support the setting of the menu language for playing discs (English, French, Spanish, Chinese, Japanese, Kor, Russian, Thai)13. The machine has a disc age control level setting14. Intelligent power-off memory function. When you are watching a blockbuster or a series, when something goes away to turn off the power or a sudden power failure, when you turn it on again, the machine will intelligently remember that it was playing when the power was off last time. The time period of the disc content continues to play, eliminating the trouble of manual searching.15. Built-in rechargeable lithium battery with large capacity. It is convenient for outdoor use, it can play continuously for about 2 hours, and the playing time may vary due to different operations. Equipped with on-board power supply for convenient use in the car16. Lithium battery capacity: 800 mA

Read more less

1. Bluetooth speakers that can put CDs 2. Automatic pop-up CD protective cover 3. Support USB/AUX/TF card input 4. Built-in woofer, support remote control operation 5. Voltage: DC 5V 6. Power: 2x3W 7. Size: 185x167x30mm

Read more less