Consumer Electronics

Specifications1. Frequency response: 30Hz-18KHz 2. Delay of sound transmission: <0.15 ms 3. Microphone specifications: Capacitive omnidirectional 4. De-emphasis: 50uS 5. S/N ratio:>90 dB 6. Maximum frequency deviation: +/-50 kHz 7. Mute level: 15 dBuV 8. Distortion: >0.9% 9. Number of channels: 100 10. Indicator: RF, IR 11. Audio output: level> 48 dBV 12. Reference distance: 60 meters (outdoor open area) 13. Audio output interface: 3.5 mm jack 14. Antenna: 1/4 wavelength spring antenna (adjustable angle) 15. Headphone output: level 15mW (16 ohm) 16. Power: 2.4V DC (2 AA rechargeable batteries) or 3.0 V DC (2 AA alkaline batteries), battery not included, 5.0 V DC (external USB mobile power supply) to charge the rechargeable batteries, current: 600mA 17. Battery life: Taking 2 AA rechargeable batteries 3200mAh as an example, Group A+B can be used for about 8 hours at the same time; Group A/B can be used for about 12 hours when working alone.Packing List1. Receiver x 1 2. Transmitter x 1 3. Manual x 1 4. 3.5 audio 3P male to 3.5 audio 3P elbow cable x 1 5. 3.5 audio 3P male microphone x 1 6. Three-core Canon male connector to 3.5 audio 3P male connector x 1 7. Boot type holder x 1Features1. Dual-channel UHF line receiving technology, supporting 2 transmitters to work. 2. Using secondary DSP receiving processor, strong anti-image interference ability. 3. Professional circuit design with LOW-CUT function. 4. Provide Mono stereo output and Stereo mono output. 5. Equipped with a headphone interface, which can be connected to headphones to monitor the radio effect in real time. 6. The volume of monitoring and audio output can be adjusted independently, and has a memory function. 7. Adopt WNCRS acoustic environment noise reduction technology, which can suppress environmental noise and wind noise. 8. Integrate a high-performance audio expander to provide a wider audio real-time dynamic response. 9. Provide 100 wireless channels, you can set multiple groups of channels to work at the same time. 10. Support Line in / MIC in input, Line in is linear input, MIC in is microphone input. 11. It supports charging with a camera, with a charging current of 600mA.

Read more less

Features1. The audio cable is 60 cm long and can be connected to the device more conveniently. 2. There is a windshield on the outside of the product to prevent wind and noise. 3. The product is equipped with a shock-absorbing structure, which can withstand strong shaking. 4. The product can be used on most cameras and mobile phones.Specification1. Sensitivity: -29+/-2dB RL=0.68Kohm Vs=1.5V( 1KHz 0dB=1V/Pa) 2. Output impedance: 0.68Kohm 1KHz (RL=0.68Kohm) 3. Frequency response: 20-16000 Hz 4. Product working current: 5mA 5. Product standard working voltage: adopt no battery drive design 6. Sound pressure input: 115dB S.P.L 7. Signal to noise ratio: More than 75dB 8. Sensitivity deviation: 1.5V-1.0V sensitivity variation less than 3dB 9. Product net weight: 0.07kg 10. Product size: 145x80x56mmPackage List1. Microphone x 1 2. Manual x 1 3. Windproof foam x 1

Read more less

Features1. UHF Wireless Transmission Tech: Wireless technology with more stability and stronger anti-interference, can deliver long transmission distance. 32 switchable channels available, you could quick to choose the stronger signal channel, recording higher fidelity sound. 2. 70dB SNR for Clearer Audio: Built-in audio processing chip, featuring with 70dB of SNR, captures audio with more details meanwhile the signal noise very low during transmission, reproducing more original and clearer sound than other ordinary mics. 3. Screen Display: Both transmitter and receiver are equipped with screens, showing channels and status lights for checking working condition in real time. 4. Multi-Device Compatibility: Included with a universal 3.5mm port and cold shoe adapter, you can mount the receiver to smartphone, digital SLR cameras, camcorders, recorders and PC, meeting shooting and recording needs on various occasions e.g. interview, vlogging recording, YouTube live streaming, presentation and more. 5. Operating distance: No less than 20 meters in complex environments with interference or no shelter, no interference and 50 meters in open areasSpecification1. Working current: 160 + /-10mAh 2. RF frequency: 570-598MHZ 3. Number of channels: 32 channels for each A/B 4. Audio frequency response: 50-15000HZ 5. Noise floor: Less than -70dB 6. Total harmonic distortion: Less than 0.1% 7. S/N: Greater than 72dB 8. Battery: Built-in 800mAh battery 9. Use time is about 5 hours 10. Production size: 61x17x47(mm)Package List1. Transmitter x 1 2. Receiver x 1 3. Lavalier Microphone x 1 4. USB Cable x 1 5. Fur Wind Shield x 1 6. Sponge Wind Shield x 1 7. 3.5mm Jack Cable x 2

Read more less

Highlights1. Specially designed for the camera and high-sensitivity condenser microphone to enhance the quality of the recording 2. Heart-shaped single-point pickup features can effectively reduce the noise of the surrounding environment to be picked up 3. Shock-resistant structural design, to reduce the mechanical noise of the camera and other vibration noiseFeatures1. High Quality & Brand New 2. Practical Occasion: photography, interviews and other occasions pickup. 3. Product Features: Specially designed for the camera and high-sensitivity condenser microphone to enhance the quality of the recording. 4. Heart-shaped single-point pickup features can effectively reduce the noise of the surrounding environment to be picked up. 5. 10dB sensitivity enhancement and 200Hz low-frequency attenuation; to meet the different field Co-use. Use standard universal connector specifications, can be simply fixed the camera. 6. Shock-resistant structural design, to reduce the mechanical noise of the camera and other vibration noise. 7. Set tone governing the selection of alloy materials design, sturdy solid, and can effectively shield electromagnetic interference. 8. 1.5V AA alkaline battery-powered, battery life of up to 100 hours.(No Battery Included) 9. Low power indicator, fully prepared ready to replace the battery. 10. Technical parameters: Monomer: Back electret. 11.Polar pattern: Cardioid. 12. Frequency response: 50Hz-16kHz. 13. Sensitivity:-32dB +/- 3dB (0dB = 1V/Pa at 1kHz). enhanced sensitivity: +10 dB. 14. The low-frequency attenuation: 60Hz 10dB / octave. output impedance: 2000 +/- 30%. 15. Use voltage: 1.5V AA batteries. (No Battery Included)

Read more less

Features1. The CR2, 3V lithium battery lead to long working time. 2. 2-range settings: Normal and tele. 3. Double back electret type capacitor microphone(stereo sound input). 4. Wild using rang: DSLR cameras, camera, DV recording, professional news receiver. 5. Portable 3.5mm Video audio output line. 6. Removable cassette, convenient for news interview microphone.Parameter1. Type of Transduction: Capacitive. 2. Polar Pattern: Hypercardioid. 3. Acoustical Principle:linear Gradient. 4. SNR:70dB(1KHZ At1 Pa). 5. Max SPL: 120dB 1khz,1%THD Into 1K Load. 6. Geometric Noise: 20dB SPL. 7. Dynamic Range: 135dB_SPL; 8. Frequency Response: 30-15000HZ. 9. Sensitivity: -40dB+/-20dB=1V/Palkhz. 10. Power Supply: 3V. 11. Impedance: 200ohm. 12. Effective distance of pickup: 4m. 13. Validity of battery: 600 hours. 14. Size of microphone tube: 22*180mm. 15. Cord length and configuration: 0.5m. 16. A microphone weight: 120g. 17. Output: Unbalance. 18. Switch: Slide.

Read more less

Features1. The microphone can be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity 2. Load impedance: <0.68Kohm 3. Fit any device that have 3.5mm MIC socket and hot shoe, suitable for 3.5mm jack phones 4. Microphone type: electret condenser microphone 5. Microphone specification: 14*6.5mm 6. Directivity: Single point 7. Frequency response: 20-20000Hz 8. Sensitivity: -42dB +/- 3dB (0dB = 1V / Pa). 9. Signal to noise ratio: >65DBSPL 10. Test voltage: 1.5VPackage List1. Microphone x 1 2. Wind Shield x 1 3. 3.5mm Audio Adapter Cable x 2 4. Color Package Box x 1

Read more less

1. 10dB sensitivity enhancement and 200Hz low-frequency attenuation; to meet the different field Co-use. 2. Use standard universal connector specifications, can be simply fixed the camera. 3. Specially designed for the camera and high-sensitivity condenser microphone to enhance the quality of the recording. 4. Set tone governing the selection of alloy materials design, sturdy solid, and can effectively shield electromagnetic interference. 5. Heart-shaped single-point pickup features can effectively reduce the noise of the surrounding environment to be picked up. 6. Shock-resistant structural design, to reduce the mechanical noise of the camera and other vibration noise. 7. Powered by 1.5V AA alkaline battery (not included) 8. Package Contents: - SGC-598 Microphone x 1 - Windscreen x 1 - English User Manual x 1

Read more less

About The Product1. BOYA BY-DMR7 is a broadcast quality condenser microphone specially designed for DSLR cameras and camcorders. The integrated ash recording allows you to record 24-bit/48kHz wav audio les to Micro SDHC cards, supporting capacities up to 32GB. 2. It features one-button recording and easy-to-read menu display, your recording work much easier. The detachable 3.5mmcable connects the BY-DMR7 Recorder to your camera's audio input, while the stereo headphone output allows you to monitor incoming audio. The shock mount system provides isolation from vibration and mechanical noise.Features1. On condenser microphone. 2. Supercardioid polar pick up pattern. 3. Records 24-bit/48kHz wav audio to a Micro SDHC card. 4. Easy-to-use menu system and LCD display. 5. Detachable 3.5mm gold-plated audio cable. 6. Switchable low-cut filter. 7. 3.5mm headphone monitor input. 8. Standard size shoe mount, includes foam windscreen.

Read more less

About The ProductThe BOYA BY-HM100 is a dynamic handheld microphone with omini-directional 360 degree pickup pattern. With Isolated capsule and a high qualaity microphone head, it can well reuduce handling noise and provide a clear live sound. There's no need for any extra battery or phantom power which ensures convenient use ideal for ENG & Interviews.Features1. Handheld dynamic mic with XLR connector, no need extra battery or phantom power. 2. Omni-directional pickup pattern, tailored frequency response for speech. 3. Isolated capsule reduces handling noise and makes the sound more clear. 4. Durable aluminum alloy body and extra long handle. 5. Ideal for ENG, interviews, presentation, etc.

Read more less

About The ProductThe BOYA BY-V01 is a stereo X/Y condenser microphone, this microphone provides greater control of your audio than the internal mics on DSLR camera, video cameras, or digital recorders. A switch for 90 degree or 120 degree pickup patterns allows you to adjust the directivity of the microphone. Compact and lightweight, the BY-V01 attaches to your camera's shoe mount and plugs directly into your camera or portable recorder's microphone input for crisp, clear stereo audio capture. The included windscreen cuts down not only on environmental noise, but on the operational noises of the lens and camera, such as autofocus movement.Features1. Compact stereo microphone. 2. Selectable pickup patterns 90 degree or 120 degree. 3. Integrated cold-shoe mount and foam windshield. 4. Light weight and easy to use. 5. Includes fur windscreen. 6. Integrated shock mount and shoe mount with threaded 1/4 inch socket.

Read more less

Features1. The CR2, 3V lithium battery lead to long working time. 2. Independent control (single / Multiplayer) model to collect voice. 3. Double back pole type capacitor microphone(stereo sound input). 4. Wild using rang (DSLR cameras, camera, DV recording, professional news receiver). 5. Portable 3.5mm Video audio output line (length of line is optional). 6. Removable cassette (convenient for news interview microphone).Parameter1. Type of Transduction: Capacitive. 2. Polar Pattern:Hypercardioid. 3. Acoustical Principle:linear Gradient. 4. SNR:70dB(1KHZ At1 Pa). 5. Max SPL: 120dB@1khz,1%THD Into 1K Load. 6. Geometric Noise: 20dB SPL. 7. Dynamic Range: 135dB_SPL; Frequency Response: 30-15000HZ. 8. Sensitivity: -40dB+/-20dB=1V/Palkhz. 9. Power Supply: 3V. 10. Impedance: 200ohm. 11. Effective distance of pickup: 4m. 12. Validity of battery: 600 hours. 13. Size of microphone tube: 22*180mm. 14. Cord length and configuration: 0.5m. 15. A microphones weight: 120g. 16. Output: Unbalance. 17. Switch: Slide.

Read more less

1) Super-cardioid polar pattern 2) Superior isolation from camera system 3) 360 Degree Pan / 180 Degree Tilt 4) Low self-noise 5) Low-cut filter 6) Wind screen and windshield 7) Low power warning 8) Superior RF Immunity 9) Cold shoe mount and 1/4 inch mount, Supports many shooting accessories with 1/4 inch screw. Hot shoe mounted on camera for simultaneous video shooting. Easily mounted with Magic Hand Specification: 1) Transducer Principle: Back Electric Condenser 2) Dynamic Range: 114dB 3) Polar Pattern: Super Cardioid 4) SPL: 134dB 5) Frequency Range: 20Hz~20,000Hz 6) THD: Less than or equal 0.5% 7) Output Impedance: 200ohms 8) Power: DC3.0V (AAA 1.5V x2 not included) 9) Sensitivity: -30+/-2dB 10) Signal to Noise Ratio: 74dB 11) Battery Life: Greater than or equal 200h 12) Dimension: 155.7mm x 43.6mm x 91.3mm 13) Weight: 90g

Read more less

About The Product1. The BOYA BY-BM3030 is a Super-cardioid condenser shotgun microphone, 3.5mm mini plug connector making it compatible with DSLRs, camcorders, audio recorders that equipped with 3.5mm mic input. It features an integrated shock mount that can be mounted on a camera or tablet, and is ideal for interviews, ENG and more. 2. The high-quality and uni-directional condenser capsule will decrease ambient noise while recording sound with greater clarity. This mic includes a foam windscreen and fur windscreen that helps to decrease vocal plosives and wind noise when recording dialog and powered by two pieces of AA batteries (not included) for up to 150 hours.Feature1. Studio-quality condenser microphone. 2. Super-cardioid polar pick up pattern. 3. Integrated shock mount. 4. Lightweight and easy to use. 5. 1/4 inch-20 socket for use with boom pole. 6. 3.5mm mini plug output connector. 7. Foam windscreen included. 8. Simulated fur wind cover included. 9. Carry pouch included.

Read more less

About The Product1. The BOYA BY-BM3031 is a Super-cardioid condenser shotgun microphone that delivers high-quality sound for DSLRs, camcorders, audio recorders and more. 2. It features a three-level gain switch that provides a +20dB boost, 0dB unity gain, or -10dB pad to prevent distortion from audio overload. And also features a switchable high-pass filter at 80Hz to roll of unwanted low-frequency noise and rumble. 3. The lightweight mic attaches easily to any camera equipped with a 3.5mm microphone jack or to a boom pole, and integrates a built-in shock mount that helps eliminate unnecessary vibrations that create excessive background noise. 4. This mic includes a foam windscreen and fur windscreen that helps to decrease vocal plosives and wind noise when recording dialog and powered by two pieces of AA batteries (not included) for up to 120 hours.Feature1. Broadcast recording quality microphone for clear, precise audio. 2. Super-cardioid polar pick up pattern. 3. Lower noise and higher sensitivity. 4. Two steps high pass filter (fat, 80Hz). 5. Three position level control (-10dB, 0, +20dB). 6. 1/4 inch threaded mount. 7. 3.5mm output plug. 8. Durable ABS construction.

Read more less

About The Product1. The BY-DM2 is a professional audio solution for your Android devices. 2. This lavalier microphone can connect with any Android device with Type-C connector and help captures clear, high-quality sound during audio recording. 3. It can offer up to 24-bit / 48 kHz resolution with a frequency response of 25 Hz to 20 kHz. 4. The Type-C connector can support below equipment: - SAMSUNG: Galaxy s9, s9+, s8, s8+, s7+, c9 c7 c5 Pro... - HUAWEI: p20, p20 pro, Mate10,9, Nova 2,2s, Honor10,9... - XIAOMI: 8, 6, 5s, 5s+, 5, 4c, Note3, Note2... - MEIZU: Pro7, Pro7+, Pro6, Pro6+, 15, 15+, M15... - LG: G6, Q6, V30, V20... - OPPO: Find X... - VIVO: Vivo NEX... - Google: Pixel, Pixel 2... - And moreFeature1. USB Type-C connector for Android devices. 2. Omnidirectional mic. 3. 24-bit / 48 kHz digital recording. 4. Include mic clip and wind screen. 5. All-metal construction. 6. Include carrying pouch.

Read more less

1. Soft sponge, no dust, high density 2. The sound effects, suitable for studio and KTV etc 3. Sound-absorbing sponge with beautiful appearance and good acoustic characteristics, it provides little diffusion, it makes you sound more dynamic 4. Material: sponge 5. Size: 30x30x2.5cm

Read more less

1. Soft sponge, no dust, high density 2. The sound effects, suitable for studio and KTV etc 3. Sound-absorbing sponge with beautiful appearance and good acoustic characteristics, it provides little diffusion, it makes you sound more dynamic 4. Material: sponge 5. Size: 30x30x2.5cm

Read more less

1. Double Screen Mesh Design: Efficiently reduce the plosive, wind interference, saliva spraying during your recording or broadcasting, get a clear and loud sound. 2. All-Round Adjustment: With 360 degree flexible gooseneck holder it can fit your work precisely and work for you in any condition. 3. Note: Tripod and shock mount microphone holder are not included here.

Read more less

1. Double Screen Mesh Design: Efficiently reduce the plosive, wind interference, saliva spraying during your recording or broadcasting, get a clear and loud sound. 2. All-Round Adjustment: With 360 degree flexible gooseneck holder it can fit your work precisely and work for you in any condition. 3. Strong & Stable Clamp: Special designed clamp can be fixed tightly to all kinds of microphone arms. With rubber mat on it never damage your furniture or devices.

Read more less

1.All you need is a cellphone data cable to connect to your computer and tune it up when it's powered.2.AUX-bus main channel output.3.One AUX output and backtrack.4.2 band EQ for each input channel.Built in professional reverb.2 bus electronic balanced display.5.Power: 50W6.Item size: 185 * 150 * 55mm / 7.3 * 5.9 * 2.2in7.Package size: 230 * 220 * 70mm / 9.1 * 8.7 * 2.4in8.Package weight: 610g / 1.3lb9.Package list: 1x Sound Mixing Console 1x USB Cable 1x Power Adaptor

Read more less

1. Material: Aluminum alloy2. Weight: 334 grams3. Voice change mode: male/female/baby voice4. Charging voltage: 3.3V-4.2V5. Size: 12.5x10.5x2.6 cm6. Support devices: support Apple Android system devices7. Battery capacity:1000 mAh8. Using DSP audio chip, it can adjust the rhythm in time, make the audio signal clearer, and the output sound effect is round and three-dimensional9. Sound effects: 12 electronic sounds + 12 sound effects + 6 modes

Read more less

1. Eliminate hum: completely eliminate the hum caused by the ground loop,when the audio source and the speaker in some car speakers/home stereo systems using Bluetooth receivers use the same power supply, a ground loop will occur2. Working principle: the working principle of this noise isolator is to achieve clear voice/music by eliminating the current noise in some car speakers/home stereo systems3. Compatible models: when the grounding problem still exists, it is suitable for any portable device with a 3.5mm audio jack (for your car audio system/home stereo), and can also be received with bluetooth in the car audio system/home stereo to use with bluetooth hands-free car kit4. Small and light, this small tool takes up little space and can be taken away easily5. Easy to use, this Mpow can be used with any portable device with 3.5mm audio jack6. No battery required, just plug in Mpow and start enjoying perfect audio7. Size: 5.1x1.4x1.4 cm8. Weight: 28 grams

Read more less

1. Screen size: 2.0 inches TFT screen 2. Backlight source: LED 3. Input: 4 x HDMI 4. Output: 1 x HDMI, 1xUSB Type A USB3.0 5. Audio input: 1x3.5mm audio socket 6. Audio output: 1x3.5mm audio socket 7. Input resolution: HDMI, SMPTE 720p@50/60 |1080i@50 | 1080p@23/24/30/50/60; VESA 1024x768@60 |; 1280x720@60|1280x768@60 |1280x800@60 | 1280x1024@60 | 1360x768@60 | 1366x768@60| 1440x900@60| 1600x1200@60 | 1680x1050@60 |1920x1080@50i| 1920??1080@60 |; 1920x1080@60i|1920x1200@60 8. Output resolution: HDMI, SMPTE 720p@60 |1080p@60; VESA 1024x768@60 | 1280x720@60|1280x768@60 |1280x800@60 | 1280x1024@60 | 1360x768@60 | 1366x768@60| 1440x900@60| 1680x1050@60 | 1920x1080@60 9. Power: 18W 10. Working temperature: -30-50 Degrees Celsius 11. Working humidity: 10%~85% 12. Single machine size: 185x 110x 39mm 13. Stand-alone weight: 648g

Read more less

1. Multiple sound effects and scene modes: The sound card supports multiple scene modes and multiple sound effects. It can become the voice of children, men, women, etc., and add fun to the sound.2. Large battery: Built-in 1200mAh large rechargeable battery can provide long-lasting power for entertainment time, avoid frequent charging, and eliminate the trouble of insufficient battery power.3. High compatibility: Universal USB interface for charging and connecting to a computer; standard 3.5mm plug for stable audio signal input and output. Compatible with main phone and computer.4. Wireless connection: provide wired and wireless connection. Wired connection can achieve smooth signal transmission, while BT wireless connection can bring convenience.5. Easy to use: each button has a clear mark to indicate a specific function. The visual indicator shows the working status. The adjustment knob can meet the requirements of tuning.6. Battery capacity: 1200mAh7. Power input: DC 5V 2A8. Power: 5W9. Recording: SNR 16bit / 48kHz, 90dB10. Signal to noise ratio: 106dB11. Product size: 23.5 x 15 x 3 cmpacking list:1 x sound card1 x USB cable2 x audio cable1 x user manual

Read more less

1. Wireless music pickup set without cable limitation. 2. About 6 hours long time using. 3. Can charge with computer with USB port. 4. Mini size easy taking. 5. Sweat-proof design. 6. Please note: This 2.4G wireless microphone does not have an audio player. It needs to be used with audio, power amplifier or amplifier, and cannot be amplified alone.

Read more less

Features: 1. Compact design: The pedal connector has made of copper with techonolgy gold plated, provide you with sound quality without transmission loss. Smaller than the traditional power cable, save pedal space and keep pedals in order. 2. Fine Signal Transmission: The copper coupler designed for pedalboards effect guitar with equal positioning jack, which minimizes the distance between effects, allowing efficient use of space. We recommend connecting between two effects of similar height 3. High Quality Material: OTraki straight type pedal couplers is gold plated, the tone is good, the signal is strong, the straight-through effect, and the mute noise reduction effect is superior 4. Work For Edge Effect Pedal: 1/4 inch (6.3mm) male to 1/4 inch (6.3mm) male coupler, compatible for Boss, compatible for Marshall, compatible for Korg, compatible for Dunlop, compatible for Fender etc. 5. Uses: All designed metal, components for maximum power transfer and signal for pedal effects and pedalboards, any noise with them. Descriptions: 1. Save space on your pedal board, keeps it in order and looks professional. 2. Great signal transmission. It is great for use with effects / pedalboards. Specifications: Material: Metal Color: Silver Size: 75 x 13 x 13 mm

Read more less

1. Product function: transmit and extend audio signals 2. Product plug: gold-plated 6.35mm male 3. Product terminal: 3P pluggable terminal 4. Product material: Copper 5. Product diameter: 5.0mm outer diameter 6. Product length: 30cm 7. Product wiring method: solder-free, terminal screws fixed 8. Applicable equipment: Mixer KTV equipment Amplifier, etc. 9. Weight: 30g

Read more less

Features: 1. Compact design: The pedal connector has made of copper with techonolgy gold plated, provide you with sound quality without transmission loss. Smaller than the traditional power cable, save pedal space and keep pedals in order. 2. Fine Signal Transmission: The copper coupler designed for pedalboards effect guitar with equal positioning jack, which minimizes the distance between effects, allowing efficient use of space. We recommend connecting between two effects of similar height 3. High Quality Material: OTraki straight type pedal couplers is gold plated, the tone is good, the signal is strong, the straight-through effect, and the mute noise reduction effect is superior 4. Work For Edge Effect Pedal: 1/4 inch (6.3mm) male to 1/4 inch (6.3mm) male coupler, compatible for Boss, compatible for Marshall, compatible for Korg, compatible for Dunlop, compatible for Fender etc. 5. Uses: All designed metal, components for maximum power transfer and signal for pedal effects and pedalboards, any noise with them. Descriptions: 1. Save space on your pedal board, keeps it in order and looks professional. 2. Great signal transmission. It is great for use with effects / pedalboards. Specifications: Material: metal Size: 75 x 12 mm

Read more less

1. Length: 3 meters 2. Pure copper wire cloth is used to achieve high protection effect, resist external electromagnetic interference and ensure signal transmission 3. Nickel-plated, gold-plated, wear-resistant, long life 4. Mainly used for mobile phone, computer, mixer live equipment and other equipment and microphone link 5. Weight: 86g

Read more less

1. Length: 3 meters 2. Pure copper wire cloth is used to achieve high protection effect, resist external electromagnetic interference and ensure signal transmission 3. Nickel-plated, gold-plated, wear-resistant, long life 4. Mainly used for the connection of 3.5mm interface and microphone of mobile phones, computer sound cards, live sound cards and other equipment 5. Weight: 87g

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Durable and long life. 4. Length: 3 meters. 5. Weight: 217g.

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Durable and long life. 4. Length: 5 meters. 5. Weight: 332g.

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Durable and long life. 4. Length: 10 meters. 5. Weight: 629g.

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Braided wire, durable, anti-pulling, long service life. 4. Length: 3 meters. 5. Weight: 217g.

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Braided wire, durable, anti-pulling, long service life. 4. Length: 5 meters. 5. Weight: 332g.

Read more less

1. Mainly used to amplify the sound of guitars, bass and other instruments. 2. Pure copper core wire, anti-electromagnetic interference to ensure signal transmission. 3. Braided wire, durable, anti-pulling, long service life. 4. Length: 10 meters. 5. Weight: 629g.

Read more less

HDMI Karaoke Mixer AmplifierPortable Digital Stereo Audio Echo System Machine with 2 MicsWorks with 4K/2K TV, PC, Home Theater, KTV, Android Smart PhoneUnique HDMI Karaoke Mixing Amplifier Solution - Stream or play videos and musics freely, simply connecting this HDMI mixer between RCA and HDMI sources for more impressive features such as connecting headphone to the front panel jack for a quiet listening.Fantastic Audio-visual Enjoyment - Rakoit karaoke mixer works fine with 4K/2K scaler and could convert 1080P or lower quality video to an advanced 4K/2K resolution ratio which brings you a total different audio-visual experience.Bonus Music Volume Adjustment - karaoke hdmi mixer support mix audio from 2 different microphones and allow to adjust music volume, echo, individual microphone volume, meanwhile, offer you a superior stereo audio quality.Intelligent & Moderative Controller - To make the hdmi mixer works simultaneous with Android TV, Set Top Box, choosing computer to control the selection of songs or other operations, along with streaming or playing the videos or music.Product descriptionUltimate HDMI karaoke mixer amplifier solution!Amplify and echo the sound from external microphones to mix with original sound, then transfers the output via HDMI port both including video and sound.Supports 4K2K scaler which can convert 1080P or lower video to 4K2K size and display on 4K2K TV.Works with multi-devices such as Android Tv Box, Android Set top Box, DVD Player, HDMI dongle, Laptop, Computer etc.Bulid-in echo processor to adjust a higher-grade sound.Mixer works with 4K source player and 4K TV Displayer.Echo Volume Music Volume Control.Two Microphone Inputs.Two Individual Microphone Volume Controls.One HDMI Input and One HDMI Output.Output for HD AC Signal Mixing with Mic sound.Color：BlackItem Weight: 10.6 ouncesProduct Dimensions: 6.3 x 3.9 x 1 inchOne Stereo Audio Input and One Output.Stereo Audio Outputs.One CVBS Video Input and output.One Earphone Port.How to use: 1. Plug in power supply to the device power jacket.2. Connect HDMI cable or RCA Cable to the device from your source device, such as DVD Player, laptop or tablet.3. Plug in the HDMI Cable or RCA cable to your TV or speaker.4. Connect the microphone cable into the microphone jacket.5. Play in the MTV music and sing with your song, adjust the effect with he Knobs in the front.Front Panel:2 x MIC Line-in1 x MIC 1 volume adjust1 x MIC 2 volume adjust1 x Main volume adjust1 X Echo volume adjust1 X Earphone slotBack panel:1 x DC-in 12V1 x AV In1 x AV Out1 x HDMI Output1 x HDMI Input2 x Audio Output2 x Audio InputPackage Content:1 x Karaoke Mixer1 x HDMI Cable1 x Power Adapter1 x RCA Cable

Read more less

1. Scope of application: microphone plug2. Material: alloy, PVC3. Surface treatment: gold-plated4. Rated load: 105VA5. Insulation resistance: 106MΩ6. Features: beautiful and practical, convenient and simple to install, fine workmanship, surface gold-plated treatment, increase current intensity, improve conductivity, reduce resistance, and be durable7. Description: 2 in 1, one male and one female paired

Read more less

1. Made from premium PE material for elasticity and durability, comfort and resistance against pull and bends to protect the inner core. 2. Stretching to 100cm spring design, enhance the flexibility, light and suitable length, easy to collect, carry about and use. 3. Small size and easy to carry. 4. An external 3.5 mm microphone can be connected via an audio adapter to meet professional recording needs. 5. It is ideal for connecting live broadcast microphone to smartphones.

Read more less

1. Made from premium PE material for elasticity and durability, comfort and resistance against pull and bends to protect the inner core. 2. Stretching to 100cm spring design, enhance the flexibility, light and suitable length, easy to collect, carry about and use. 3. Small size and easy to carry. 4. An external 3.5 mm microphone can be connected via an audio adapter to meet professional recording needs. 5. It is ideal for connecting live broadcast microphone to smartphones.

Read more less

1. Built-in decoder chip HS-100B, plug and play2. USB audio (UAC): UAC2.03. Signal-to-noise ratio/SNR 93 dB4. Crosstalk/Crosstalk: -78 dB5. Distortion/THD+N: -70dB6. Frequency response/FR: 20Hz-20KHz7. Power Consumption: 20-40mA8. Can help you record digital music.9. Support USB 2.0 / 1.1, no driver installation is required.10. Compatible with Mac OS X, Windows 98SE / 2000 / XP / Vista / Windows7 / Windows 8.11. The USB to XLR female microphone cable uses shielded wires and zinc alloy connection plugs, which are firm and sturdy.

Read more less

1. Product color: red 2221R, green 2221G, blue 2221B, yellow 2221Y, orange 2221O2. Product net weight: 28.5 grams3. Product size: 68.5x29.5mm4. Product material: high-strength ABS shell, nickel-plated copper pins5. Product use: Mainly used for the welding of stage speakers and power amplifier connecting wires, the outer diameter of the outlet hole is 15mm, and the wire with a width of 10mm can be used

Read more less

1. Product color: red 2221R, green 2221G, blue 2221B, yellow 2221Y, orange 2221O2. Product net weight: 28.5 grams3. Product size: 68.5x29.5mm4. Product material: high-strength ABS shell, nickel-plated copper pins5. Product use: Mainly used for the welding of stage speakers and power amplifier connecting wires, the outer diameter of the outlet hole is 15mm, and the wire with a width of 10mm can be used

Read more less

1. Built-in decoding chip, plug and play, no driver required2. Decoding chip: HS100B3. TYPE-C Audio Class(UAC); UAC2.04. Signal to Noise Ratio/SNR: 93 dB5. Crosstalk/Crosstalk: -78 dB6. Distortion/THD+N: -70dB7. Frequency response/FR: 20Hz-20KHz8. Power consumption: 20-40mA9. Can help you record digital music10. Support USB 2.0 / 1.111. Compatible with Mac OS X, Windows 98SE / 2000 / XP / Vista / Windows7 / Windows 812. Use shielded wires and zinc alloy connection plugs, which can transmit sound, strong and strong13. Compatible with USB 2.0. Suitable for all computers with TYPE-C ports, such as Windows 98SE / 2000 / XP / VISTA / Win7 / Win 8 / Win 10, Mac OS. Compatible with most recording software, such as GarageBand, Guitar Combo Amps, Audacity, Amplitude14. Support 44.1 kHz and 48 kHz sampling rate. Designed to transmit the microphone/piano/bass signal to the computer. Built-in D/A conversion chip, compatible with computer without other drivers. Plug in the TYPE-C interface and use your PC as a guitar recorder. Also very suitable for stage and studio use15. Low noise, high fidelity, TYPE-C microphone cable diameter 6mm (24AWG), oxygen-free copper (OFC) center conductor can enhance signal transmission. One-piece TYPE-C interface and nickel-plated metal shell XLR connector, TYPE-C microphone line uses PVC insulation material and high-density twisted copper shielding layer to reduce noise and achieve quiet operation16. Insert the XLR female plug into your microphone, insert the TYPE-C interface into the computer, your computer will be converted into a guitar amplifier and recording system without any other operating hardware and drivers, plug and play

Read more less

1. Built-in decoding chip, plug and play, no driver required2. Decoding chip: HS100B3. TYPE-C Audio Class(UAC); UAC2.04. Signal to Noise Ratio/SNR: 93 dB5. Crosstalk/Crosstalk: -78 dB6. Distortion/THD+N: -70dB7. Frequency response/FR: 20Hz-20KHz8. Power consumption: 20-40mA9. Can help you record digital music10. Support USB 2.0 / 1.111. Compatible with Mac OS X, Windows 98SE / 2000 / XP / Vista / Windows7 / Windows 812. Use shielded wires and zinc alloy connection plugs, which can transmit sound, strong and strong13. Compatible with USB 2.0. Suitable for all computers with TYPE-C ports, such as Windows 98SE / 2000 / XP / VISTA / Win7 / Win 8 / Win 10, Mac OS. Compatible with most recording software, such as GarageBand, Guitar Combo Amps, Audacity, Amplitude14. Support 44.1 kHz and 48 kHz sampling rate. Designed to transmit the microphone/piano/bass signal to the computer. Built-in D/A conversion chip, compatible with computer without other drivers. Plug in the TYPE-C interface and use your PC as a guitar recorder. Also very suitable for stage and studio use15. Low noise, high fidelity, TYPE-C microphone cable diameter 6mm (24AWG), oxygen-free copper (OFC) center conductor can enhance signal transmission. One-piece TYPE-C interface and nickel-plated metal shell XLR connector, TYPE-C microphone line uses PVC insulation material and high-density twisted copper shielding layer to reduce noise and achieve quiet operation16. Insert the XLR female plug into your microphone, insert the TYPE-C interface into the computer, your computer will be converted into a guitar amplifier and recording system without any other operating hardware and drivers, plug and play

Read more less

1. 100 meters transmission distance (330FT) 2. Built-in lithium battery, charge once, battery life 5-6 hours 3. Strong anti-interference, can penetrate walls 4. Built-in damping shaft, 270 degree rotation to adjust orientation 5. Plug and play, lossless sound quality 6. Working channel: Channel 20 7. Receiving sensitivity: -90dBm 8. Frequency response range: 20-20000Hz 9. Frequency range: U frequency 10. Delay time: less than 0.5ms 11. Sampling rate: 64KHz, 16bit 12. Signal to noise ratio: 95dB 13. Distortion: 0.3%@1KHz 14. Dynamic range: 90dB 15. Size: 11.66x3.66x1.63cm

Read more less

1. The shell material is made of zinc alloy, which is wear-resistant, pressure-resistant and noise-resistant2. The contact part is gold-plated, resistant to plugging, and good contact3. Good quality and long service life4. XLR audio interface conversion for various audio players, microphones, guitars, stage lights, mixers and other equipment5. Size: 85x18.5mm

Read more less