Solar Power

1. Material: ABS+metal 2. System voltage: 12V/24V self-identification 3. No-load loss: less than 0.4W 4. Solar input voltage: 100V VOC (MAX) 5. Battery voltage: 9-32V 6. Voltage range: battery voltage +2V~100V (MAX) 7. Rated charging current: 40A 8. Rated load current: 20A 9. USB output: 5V/3A 10. Panel input power (MAX): 480W/12V; 960W/24V 11. Temperature compensation coefficient: -2mv/degree Celsius/2V (default value) 12. Working temperature: -10~+65 degrees Celsius 13. Protection level: IP21 14. Electromagnetic compatibility: in accordance with EN61000, EN55022, EN55024 15. Solar controller application scope: solar street lights, solar roofs, solar awnings, solar power generation systems, solar RVs, solar billboards, etc. 16. System operation HD LCD LCD display, the display timing setting corresponds to the LCD display, clearly observe the operating status of the equipment and conveniently modify the operating parameters 17. The large-section and large-pitch wiring ports increase the insulation performance and installation reliability, effectively reduce the circuit voltage drop and reduce consumption 18. Multiple USB charging ports support most USB port devices on the market, mobile phones, tablets, game consoles, etc. 19. Solar controller WiFi remote control, more convenient to use 20. Size: 18.6x18.6x6.7 cm 21. Weight: 946 gSpecification: Package Weight One Package Weight 1.15kgs / 2.54lb One Package Size 25cm * 23cm * 11cm / 9.84inch * 9.06inch * 4.33inch Qty per Carton 12 Carton Weight 14.90kgs / 32.85lb Carton Size 48cm * 45cm * 32cm / 18.9inch * 17.72inch * 12.6inch Loading Container 20GP: 385 cartons * 12 pcs = 4620 pcs 40HQ: 895 cartons * 12 pcs = 10740 pcs

Read more less

1. Material: ABS+metal 2. System voltage: 12V/24V self-identification 3. No-load loss: less than 0.4W 4. Solar input voltage: 50V VOC (MAX) 5. Battery voltage: 9-32V 6. Voltage range: battery voltage +2V~50V (MAX) 7. Rated charging current: 10A 8. Rated load current: 20A 9. USB output: 5V/3A 10. Panel input power (MAX): 120W/12V; 240W/24V 11. Temperature compensation coefficient: -2mv/degrees Celsius/2V (default value) 12. Working temperature: -10~+65 degrees Celsius 13. Protection level: IP21 14. Electromagnetic compatibility: in accordance with EN61000, EN55022, EN55024 15. Solar controller applicable scope: solar street lights, solar roofs, solar awnings, solar power generation systems, solar RVs, solar billboards, etc. 16. The system runs on a high-definition LCD display screen, which displays the timing settings corresponding to the LCD display, clearly observing the operating status of the equipment and conveniently modifying the operating parameters 17. The use of large-section, large-pitch wiring ports increases insulation performance and installation reliability, effectively reduces circuit voltage drop, and reduces consumption 18. Multiple USB charging ports support most USB port devices on the market, mobile phones, tablets, game consoles, etc. 19. Solar controller WiFi remote control, more convenient to use 20. Size: 13x13x5.8 cm 21. Weight: 376 gramsSpecification: Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 18cm * 17cm * 10cm / 7.09inch * 6.69inch * 3.94inch Qty per Carton 30 Carton Weight 16.10kgs / 35.49lb Carton Size 51cm * 37cm * 48cm / 20.08inch * 14.57inch * 18.9inch Loading Container 20GP: 294 cartons * 30 pcs = 8820 pcs 40HQ: 683 cartons * 30 pcs = 20490 pcs

Read more less

1. Material: ABS+metal2. System voltage: 12V/24V self-identification3. No-load loss: less than 0.4W4. Solar input voltage: 100V VOC (MAX)5. Battery voltage: 9-32V6. Voltage range: battery voltage +2V~100V (MAX)7. Rated charging current: 60A8. Rated load current: 20A9. USB output: 5V/3A10. Panel input power (MAX): 720W/12V; 1440W/24V11. Temperature compensation coefficient: -2mv/degrees Celsius/2V (default value)12. Working temperature: -10~+65 degrees Celsius13. Protection level: IP2114. Electromagnetic compatibility: in compliance with EN61000, EN55022, EN5502415. Solar controller application scope: solar street lights, solar roofs, solar awnings, solar power generation systems, solar RVs, solar billboards, etc.16. The system runs on a high-definition LCD display screen, which displays the timing settings corresponding to the LCD display, clearly observing the operating status of the equipment and conveniently modifying the operating parameters17. The use of large-section, large-pitch wiring ports increases the insulation performance and installation reliability, effectively reduces the circuit voltage drop, and reduces consumption18. Multiple USB charging ports support most USB port devices on the market, mobile phones, tablets, game consoles, etc.19. Solar controller WiFi remote control, more convenient to use20. Size: 21.8x18.6x6.7 cm21. Weight: 1226 gramsSpecification: Package Weight One Package Weight 1.43kgs / 3.16lb One Package Size 27cm * 23cm * 11cm / 10.63inch * 9.06inch * 4.33inch Qty per Carton 10 Carton Weight 15.40kgs / 33.95lb Carton Size 55cm * 50cm * 25cm / 21.65inch * 19.69inch * 9.84inch Loading Container 20GP: 387 cartons * 10 pcs = 3870 pcs 40HQ: 900 cartons * 10 pcs = 9000 pcs

Read more less

1. Material: ABS+metal 2. System voltage: 12V/24V self-identification 3. No-load loss: less than 0.4W 4. Solar input voltage: 100V VOC (MAX) 5. Battery voltage: 9-32V 6. Voltage range: battery voltage +2V~100V (MAX) 7. Rated charging current: 50A 8. Rated load current: 20A 9. USB output: 5V/3A 10. Panel input power (MAX): 600W/12V; 1200W/24V 11. Temperature compensation coefficient: -2mv/degrees Celsius/2V (default value) 12. Working temperature: -10~+65 degrees Celsius 13. Protection level: IP21 14. Electromagnetic compatibility: in compliance with EN61000, EN55022, EN55024 15. Solar controller application scope: solar street lights, solar roofs, solar awnings, solar power generation systems, solar RVs, solar billboards, etc. 16. The system runs on a high-definition LCD display screen, which displays the timing settings corresponding to the LCD display, clearly observing the operating status of the equipment and conveniently modifying the operating parameters 17. The use of large-section, large-pitch wiring ports increases the insulation performance and installation reliability, effectively reduces the circuit voltage drop, and reduces consumption 18. Multiple USB charging ports support most USB port devices on the market, mobile phones, tablets, game consoles, etc. 19. Solar controller WiFi remote control, more convenient to use 20. Size: 21.8x18.6x6.7 cm 21. Weight: 1226 gramsSpecification: Package Weight One Package Weight 1.43kgs / 3.16lb One Package Size 27cm * 23cm * 11cm / 10.63inch * 9.06inch * 4.33inch Qty per Carton 10 Carton Weight 15.40kgs / 33.95lb Carton Size 55cm * 50cm * 25cm / 21.65inch * 19.69inch * 9.84inch Loading Container 20GP: 387 cartons * 10 pcs = 3870 pcs 40HQ: 900 cartons * 10 pcs = 9000 pcs

Read more less

-Specifications:1. Applicable battery voltage: 3.2V lithium iron phosphate battery/3.7V lithium battery-Connecting a 3.2V lithium battery requires its own protection plate-Connecting a 3.7V lithium battery does not require the battery own protection board-The board has overcharge and overdischarge protection for 3.7V lithium batteries2. LED application voltage: 2.8V-3.3V, power less than 10W3. Applied solar panel power: 5V-6V / less than 10W4. Sensing mode: light control +PIR human body sensing5. Sensing distance: 3-5m (ambient temperature will affect the sensing distance)6. Sensing time: 25 seconds7. Material: glass fiber8. Weight: about 10g9. Size: about 5.9 x 1.9cm-Three modes are adjustable:1. Sensing high + light2. Sensing high light + light out3. light-controlled constant light-Note: please make sure the positive and negative connections of the battery, if the connection is wrong, it will damage the circuit board-If it does not light up or go out a few seconds after connecting, please check whether the battery voltage is enough, or check whether the connecting wire between the battery and the circuit board is firmSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 5cm * 4cm / 3.15inch * 1.97inch * 1.57inch Qty per Carton 240 Carton Weight 5.60kgs / 12.35lb Carton Size 42cm * 34cm * 32cm / 16.54inch * 13.39inch * 12.6inch Loading Container 20GP: 583 cartons * 240 pcs = 139920 pcs 40HQ: 1354 cartons * 240 pcs = 324960 pcs

Read more less

-Supports battery type (factory setting defaults to B2):-B1=Lead-acid battery 12V/24V (automatic recognition)-B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)-B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)-Safe use recommendations:1. This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V auto adaptive2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Maximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery5. Charging cut-off voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10V(B3)7. Discharge recovery voltage: 12.6V(B1), 10.5V(B2), 12V(B3)8. Light-controlled light on threshold: PV panel 8V (light-controlled light on with a delay)9. Light control off threshold: PV panel 8V (light control off with a delay)10. USB output: 2-channel USB output, 5V/1A (maximum)11. Standby current: less than 10mA12. Operating temperature: -35- 60 degrees Celsius13. Weight: about 165g14. Size: about 13.2 x 7.5 x 3cm15. Warm tips: the battery voltage displayed on the screen will have a small error, please prevail in practice-Features:1. LCD display, use the LCD display settings, display timing settings corresponding to the LCD display is clear and intuitive, one-key operation can be completed2. Alloy heat dissipation back plate, thickened heat dissipation back plate, improve heat dissipation performance, MOS tube close to the heat dissipation plate design, can be in the ambient temperature of 60 degrees Celsius normal operation3. Working mode setting, touch the adjustment button, complete all settings with one key4. Dual USB charging ports, support most of the USB interface devices on the market, such as cell phones, tablet PCs and PSP consoles5. ABS engineering plastics shell, with high strength impact resistance, high ignition point, anti-aging, corrosion resistance and other characteristics, effective service life and safety6. It is a new type of solar controller, can fully meet the requirements of your home photovoltaic system (including home lighting system)Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 20.90kgs / 46.08lb Carton Size 50cm * 42cm * 30cm / 19.69inch * 16.54inch * 11.81inch Loading Container 20GP: 423 cartons * 120 pcs = 50760 pcs 40HQ: 982 cartons * 120 pcs = 117840 pcs

Read more less

-Supports battery type (factory setting defaults to B2):-B1=Lead-acid battery 12V/24V (automatic recognition)-B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)-B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)-Safe use recommendations:1. This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V auto adaptive2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Maximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery5. Charging cut-off voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10V(B3)7. Discharge recovery voltage: 12.6V(B1), 10.5V(B2), 12V(B3)8. Light-controlled light on threshold: PV panel 8V (light-controlled light on with a delay)9. Light control off threshold: PV panel 8V (light control off with a delay)10. USB output: 2-channel USB output, 5V/1A (maximum)11. Standby current: less than 10mA12. Operating temperature: -35- 60 degrees Celsius13. Weight: about 165g14. Size: about 13.2 x 7.5 x 3cm15. Warm tips: the battery voltage displayed on the screen will have a small error, please prevail in practice-Features:1. LCD display, use the LCD display settings, display timing settings corresponding to the LCD display is clear and intuitive, one-key operation can be completed2. Alloy heat dissipation back plate, thickened heat dissipation back plate, improve heat dissipation performance, MOS tube close to the heat dissipation plate design, can be in the ambient temperature of 60 degrees Celsius normal operation3. Working mode setting, touch the adjustment button, complete all settings with one key4. Dual USB charging ports, support most of the USB interface devices on the market, such as cell phones, tablet PCs and PSP consoles5. ABS engineering plastics shell, with high strength impact resistance, high ignition point, anti-aging, corrosion resistance and other characteristics, effective service life and safety6. It is a new type of solar controller, can fully meet the requirements of your home photovoltaic system (including home lighting system)Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 20.90kgs / 46.08lb Carton Size 50cm * 42cm * 30cm / 19.69inch * 16.54inch * 11.81inch Loading Container 20GP: 423 cartons * 120 pcs = 50760 pcs 40HQ: 982 cartons * 120 pcs = 117840 pcs

Read more less

-Supports battery type (factory setting defaults to B2):-B1=Lead-acid battery 12V/24V (automatic recognition)-B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)-B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)-Safe use recommendations:1. This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V auto adaptive2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Maximum photovoltaic voltage: Maximum 23V for 12V battery; Maximum 46V for 24V battery5. Charging cut-off voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10V(B3)7. Discharge recovery voltage: 12.6V(B1), 10.5V(B2), 12V(B3)8. Light-controlled light on threshold: PV panel 8V (light-controlled light on with a delay)9. Light control off threshold: PV panel 8V (light control off with a delay)10. USB output: 2-channel USB output, 5V/1A (maximum)11. Standby current: less than 10mA12. Operating temperature: -35- 60 degrees Celsius13. Weight: about 165g14. Size: about 13.2 x 7.5 x 3cm15. Warm tips: the battery voltage displayed on the screen will have a small error, please prevail in practice-Features:1. LCD display, use the LCD display settings, display timing settings corresponding to the LCD display is clear and intuitive, one-key operation can be completed2. Alloy heat dissipation back plate, thickened heat dissipation back plate, improve heat dissipation performance, MOS tube close to the heat dissipation plate design, can be in the ambient temperature of 60 degrees Celsius normal operation3. Working mode setting, touch the adjustment button, complete all settings with one key4. Dual USB charging ports, support most of the USB interface devices on the market, such as cell phones, tablet PCs and PSP consoles5. ABS engineering plastics shell, with high strength impact resistance, high ignition point, anti-aging, corrosion resistance and other characteristics, effective service life and safety6. It is a new type of solar controller, can fully meet the requirements of your home photovoltaic system (including home lighting system)Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 20.90kgs / 46.08lb Carton Size 50cm * 42cm * 30cm / 19.69inch * 16.54inch * 11.81inch Loading Container 20GP: 423 cartons * 120 pcs = 50760 pcs 40HQ: 982 cartons * 120 pcs = 117840 pcs

Read more less

-Parameters:1. Material: PC2. Remote control distance: 5 meters3. Outdoor rating: IP654. Light control: through the solar panel light-sensitive, darkness automatically light5. Solar panel: 4.5V/250ma drip polycrystalline silicon6. Battery capacity: 3.7V 1200mAh 18650 lithium battery7. Lighting mode: 8 flashing modes (with remote control)8. Brightness time: 14-40 hours under full power condition9. Charging time: 1 sunny day (6 hours) can be fully charged10. Timing function: can be timed for 3 hours, 5 hours, 8 hours, no timer11. Brightness adjustment: four brightness levels12. Installation: can be nailed to the wall can be broadcast on the ground13. Remote control power supply mode: button batteries14. Version B: output boost 24V for light string (please make sure your light string voltage is suitable for A or B before connecting the light string, if your light string will not light up after connecting the battery directly, it proves that the voltage of your light string is 24V)-Features:1. Solar string light circuit board can be used for 100LED or 200LED solar string lights, copper wire string lights, colorful string lights, solar road studs and other lamps control use2. Comes with battery and solar panel integrated control box, with remote control, you can set the light mode through the remote controlSpecification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 18cm * 11cm * 7cm / 7.09inch * 4.33inch * 2.76inch Qty per Carton 60 Carton Weight 15.50kgs / 34.17lb Carton Size 52cm * 38cm * 36cm / 20.47inch * 14.96inch * 14.17inch Loading Container 20GP: 374 cartons * 60 pcs = 22440 pcs 40HQ: 870 cartons * 60 pcs = 52200 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Supports battery types:-B1=lead-acid batteries-B2=lithium battery-B3=lithium iron phosphate batteries-Safe use recommendations:1. The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment3. This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries4. This controller can only use photovoltaic panels as charging power, please do not use DC or other power sources as charging power5. The controller will be hot when running, please pay attention to install the controller on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. Rated charging current: 10A, 20A, 30A3. Rated discharge current: 10A4. Max photovoltaic voltage: 12V battery less than (18V-23V) / 24V battery less than (36V-46V)5. Cut-off charging voltage: 14.4V(B1), 12.6V(B2), 14.6V(B3)6. Discharge cut-off voltage: 10.7V(B1), 9V(B2), 10.8V(B3)7. Discharge recovery voltage: 12.6V(B1), 11V(B2), 12.6V(B3)8. USB output: 5V/1A9. Standby current: less than 10mA10. Operating temperature: -35- 60 degrees Celsius11. Weight: about 160g12. Size: about 13.37 x 6.9 x 3.35cm13. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopt industrial-grade main control chip2. LCD display, the battery power grid display3. With light control timing function4. Built-in overcurrent/short-circuit protection, open-circuit protection, reverse connection protection, overcharge protection, over-discharge protection5. MOS anti-backflow circuit chipSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 15cm * 9cm * 5cm / 5.91inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 54cm * 30cm * 34cm / 21.26inch * 11.81inch * 13.39inch Loading Container 20GP: 484 cartons * 100 pcs = 48400 pcs 40HQ: 1123 cartons * 100 pcs = 112300 pcs

Read more less

-Safe use recommendations:1. This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally2. Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment3. This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be4. This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source5. The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface-Technical parameters:1. System voltage: 12V/24V automatic adaptation2. USB output: 2-channel USB output, 5V/2A (max)3. Standby current: less than 10mA4. Operating temperature: -35- 60 degrees Celsius5. Weight: about 290g6. Size: about 18.5 x 9.5 x 4.1cm7. Warm tips: the screen display of the battery voltage will have a little error, please prevail in reality-Features:1. Adopting industrial-grade main control chip2. Large LCD display, adjustable charging and discharging parameters, with power failure memory function3. Complete 3-stage charging management4. Built-in overcurrent, short circuit protection, open circuit protection, reverse connection protection, are self-recovery type, does not damage the controller5. 4-way USB output, the maximum current up to 2A, support for iPhone charging6. Dual MOS anti-backflow circuit, ultra-low heat generationSpecification: Package Weight One Package Weight 0.29kgs / 0.65lb One Package Size 22cm * 12cm * 6cm / 8.66inch * 4.72inch * 2.36inch Qty per Carton 40 Carton Weight 12.00kgs / 26.46lb Carton Size 55cm * 43cm * 21cm / 21.65inch * 16.93inch * 8.27inch Loading Container 20GP: 536 cartons * 40 pcs = 21440 pcs 40HQ: 1246 cartons * 40 pcs = 49840 pcs

Read more less

1. This 12AWG solar charging cable is designed to connect solar panels and portable power stations. It features an XT60 female connector on one end and MC4 male/female solar connectors on the other, ensuring secure energy transfer for renewable energy systems.2. Premium Cable Specifications: Constructed with 2468 12AWG tinned copper conductors, this cable offers low resistance and high current capacity. The OD of 4.0x8.0mm ensures durability while maintaining flexibility.3. Multiple Length Options: Available in 0.6m, 1m, 1.5m, and 3m lengths to accommodate various installation setups and spatial requirements.4. Safety & Durability: PVC insulation provides reliable protection against abrasion and environmental factors, with a rated operating temperature of up to 80 degrees Celsius for stable outdoor or indoor use.5. Universal Compatibility: Compatible with most solar panels, portable power stations, and vehicle-mounted battery systems utilizing XT60 or MC4 connectors, ideal for off-grid charging solutions.Parameters:1. Wire model: 2468 12AWG2. Insulation material: PVC3. Conductor material: tinned copper4. Wire outer diameter: OD: 4.0x8.0mm5. Rated temperature: 80 degrees CelsiusSpecification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 30 Carton Weight 10.10kgs / 22.27lb Carton Size 28cm * 47cm * 32cm / 11.02inch * 18.5inch * 12.6inch Loading Container 20GP: 633 cartons * 30 pcs = 18990 pcs 40HQ: 1470 cartons * 30 pcs = 44100 pcs

Read more less

1. This 12AWG solar charging cable is designed to connect solar panels and portable power stations. It features an XT60 female connector on one end and MC4 male/female solar connectors on the other, ensuring secure energy transfer for renewable energy systems.2. Premium Cable Specifications: Constructed with 2468 12AWG tinned copper conductors, this cable offers low resistance and high current capacity. The OD of 4.0x8.0mm ensures durability while maintaining flexibility.3. Multiple Length Options: Available in 0.6m, 1m, 1.5m, and 3m lengths to accommodate various installation setups and spatial requirements.4. Safety & Durability: PVC insulation provides reliable protection against abrasion and environmental factors, with a rated operating temperature of up to 80 degrees Celsius for stable outdoor or indoor use.5. Universal Compatibility: Compatible with most solar panels, portable power stations, and vehicle-mounted battery systems utilizing XT60 or MC4 connectors, ideal for off-grid charging solutions.Parameters:1. Wire model: 2468 12AWG2. Insulation material: PVC3. Conductor material: tinned copper4. Wire outer diameter: OD: 4.0x8.0mm5. Rated temperature: 80 degrees CelsiusSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 30 Carton Weight 5.90kgs / 13.01lb Carton Size 28cm * 47cm * 32cm / 11.02inch * 18.5inch * 12.6inch Loading Container 20GP: 633 cartons * 30 pcs = 18990 pcs 40HQ: 1470 cartons * 30 pcs = 44100 pcs

Read more less

1. This 12AWG solar charging cable is designed to connect solar panels and portable power stations. It features an XT60 female connector on one end and MC4 male/female solar connectors on the other, ensuring secure energy transfer for renewable energy systems.2. Premium Cable Specifications: Constructed with 2468 12AWG tinned copper conductors, this cable offers low resistance and high current capacity. The OD of 4.0x8.0mm ensures durability while maintaining flexibility.3. Multiple Length Options: Available in 0.6m, 1m, 1.5m, and 3m lengths to accommodate various installation setups and spatial requirements.4. Safety & Durability: PVC insulation provides reliable protection against abrasion and environmental factors, with a rated operating temperature of up to 80 degrees Celsius for stable outdoor or indoor use.5. Universal Compatibility: Compatible with most solar panels, portable power stations, and vehicle-mounted battery systems utilizing XT60 or MC4 connectors, ideal for off-grid charging solutions.Parameters:1. Wire model: 2468 12AWG2. Insulation material: PVC3. Conductor material: tinned copper4. Wire outer diameter: OD: 4.0x8.0mm5. Rated temperature: 80 degrees CelsiusSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 30 Carton Weight 3.80kgs / 8.38lb Carton Size 28cm * 47cm * 32cm / 11.02inch * 18.5inch * 12.6inch Loading Container 20GP: 633 cartons * 30 pcs = 18990 pcs 40HQ: 1470 cartons * 30 pcs = 44100 pcs

Read more less

1. MC4 to DC5521 Energy Storage Power Cable: This high-performance adapter cable ensures efficient and safe power transfer between portable solar devices and electronic equipment, perfect for outdoor enthusiasts and emergency power needs.2. Flame-Retardant & Durable Construction: Outer jacket and insulation layer made of flame-retardant PVC material, ensuring safety and longevity. No harmful odors or melting risks.3. Plug-and-Play Convenience: Driver-free design for instant compatibility. Thickened 16AWG/14AWG cables minimize energy loss and support fast charging.4. Heat & Wear Resistance: Flexible PVC jacket resists high temperatures (80 degrees Celsius for main line / 105 degrees Celsius for split line) and repeated bending, ensuring stable output.5. Premium Copper Conductors: Thickened pure copper cores reduce heat buildup during use, delivering safer and more efficient power transfer.6. Input: TUV-certified MC4 solar connectors; Output: DC5521 male plug. Ideal for portable solar panels, drones, laptops, car chargers, power banks, and emergency devices.Technical Specifications:1. Conductor: Pure copper2. Jacket Material: PVC3. Wire Gauge: Main line 16AWG / Split line 14AWG4. Length: Main line 1M / Split line 0.5M5. Max Temperature: Main line 80 degrees Celsius / Split line 105 degrees Celsius6. Diameter: Main line OD 5.0mm / Split line OD 3.5mmSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 30 Carton Weight 5.60kgs / 12.35lb Carton Size 27cm * 47cm * 32cm / 10.63inch * 18.5inch * 12.6inch Loading Container 20GP: 656 cartons * 30 pcs = 19680 pcs 40HQ: 1524 cartons * 30 pcs = 45720 pcs

Read more less

1. High-efficiency 45A Anderson to DC5.5mm Male Connector Cable designed for seamless energy transfer in solar charging systems, portable power stations, and renewable energy applications.2. 45A Anderson Plug: Ensures secure connection with Anderson-compatible solar panels and batteries. DC5.5mm Male Plug: Standard interface for power devices and energy storage units.3. 14AWG Tinned Copper Core: Reduces power loss during energy transfer, ideal for solar systems.4. Outer Jacket: Environmentally friendly PVC for abrasion resistance and flexibility.5. Stable performance at up to 80 degrees Celsius, suitable for outdoor and prolonged use.Parameters:1. Working temperature: 80 degrees Celsius2. Outer material: environmentally friendly PVC3. Wire core material: tinned copper4. Sheath material: chlorinated polyethylene5. Wire gauge: 14AWGSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 25cm * 15cm * 3cm / 9.84inch * 5.91inch * 1.18inch Qty per Carton 30 Carton Weight 3.50kgs / 7.72lb Carton Size 27cm * 47cm * 32cm / 10.63inch * 18.5inch * 12.6inch Loading Container 20GP: 656 cartons * 30 pcs = 19680 pcs 40HQ: 1524 cartons * 30 pcs = 45720 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 19cm * 14cm * 7cm / 7.48inch * 5.51inch * 2.76inch Qty per Carton 24 Carton Weight 15.00kgs / 33.07lb Carton Size 44cm * 38cm * 30cm / 17.32inch * 14.96inch * 11.81inch Loading Container 20GP: 531 cartons * 24 pcs = 12744 pcs 40HQ: 1234 cartons * 24 pcs = 29616 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 1.25kgs / 2.76lb One Package Size 24cm * 17cm * 9cm / 9.45inch * 6.69inch * 3.54inch Qty per Carton 22 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 22 pcs = 9064 pcs 40HQ: 958 cartons * 22 pcs = 21076 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 2.18kgs / 4.81lb One Package Size 31cm * 28cm * 11cm / 12.2inch * 11.02inch * 4.33inch Qty per Carton 4 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 33cm * 30cm / 18.11inch * 12.99inch * 11.81inch Loading Container 20GP: 585 cartons * 4 pcs = 2340 pcs 40HQ: 1359 cartons * 4 pcs = 5436 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 2.18kgs / 4.81lb One Package Size 31cm * 28cm * 11cm / 12.2inch * 11.02inch * 4.33inch Qty per Carton 4 Carton Weight 10.00kgs / 22.05lb Carton Size 46cm * 33cm * 30cm / 18.11inch * 12.99inch * 11.81inch Loading Container 20GP: 585 cartons * 4 pcs = 2340 pcs 40HQ: 1359 cartons * 4 pcs = 5436 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 1.25kgs / 2.76lb One Package Size 24cm * 17cm * 9cm / 9.45inch * 6.69inch * 3.54inch Qty per Carton 22 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 22 pcs = 9064 pcs 40HQ: 958 cartons * 22 pcs = 21076 pcs

Read more less

1. Intelligent tracking algorithm, real-time tracking of peak voltage and current, enabling the solar panel to achieve peak power output and higher charging efficiency2. Built-in safety and protection devices, with input and output reverse connection protection function, preventing damage from reverse connection and automatically adapting to the system battery voltage3. High-definition display screen + feedback-style buttons, effectively enhancing human-computer interaction efficiency4. Wiring installation adopts a concealed design. When using, pull down the bottom cover box, connect the wiring properly, and then cover the bottom cover when installation is completed5. Supports charging of various USB devices: including mobile phones, tablet computers, portable game consoles, etc6. Widely applicable, suitable for solar power supply systems for solar energy generation, smart home, solar monitoring systems, solar light boxes, solar billboards, solar warning lights, and other solar-powered systemsParameters:1. Maximum open-circuit voltage of the solar panel: 100V (at the lowest temperature); 92V (at the normal temperature of 25 degrees Celsius)2. System rated voltage: 12V/24V, automatically identified3. Maximum battery voltage: 8V - 32V4. Protection level: IP305. Grounding type: positive pole grounding6. Temperature range of the display screen: -20 degrees Celsius to +70 degrees Celsius7. Working environment temperature range: -20 degrees Celsius to +55 degrees Celsius8. Storage environment temperature: -30 to +80 degrees Celsius9. Working environment humidity: less than or equal to percent 90 without condensation10. Static loss: less than 50mA11. High-voltage protection: lead-acid battery 16V12. Light control point voltage: 5V/10V/15V/20VSpecification: Package Weight One Package Weight 0.56kgs / 1.24lb One Package Size 19cm * 14cm * 7cm / 7.48inch * 5.51inch * 2.76inch Qty per Carton 24 Carton Weight 15.00kgs / 33.07lb Carton Size 44cm * 38cm * 30cm / 17.32inch * 14.96inch * 11.81inch Loading Container 20GP: 531 cartons * 24 pcs = 12744 pcs 40HQ: 1234 cartons * 24 pcs = 29616 pcs

Read more less

1. Material: copper + PVC2. Product specifications: 10AWG (6 square millimeters)3. Cable length: 2 meters4. Voltage rating: 1.8KV5. Surface finish: irradiation process, UV-resistant outer sheath for enhanced safety and durability6. Installation type: direct plug-in7. Rated current: 70A8. Waterproof rating: IP679. Application: primarily used to extend the connection distance from solar panels to charge controllers, inverters, or other photovoltaic system components, allowing for more flexible system design and layout.10. Application scope: photovoltaic projects in RVs, yachts, industrial, and residential applications.11. Product composition: red MC4 photovoltaic extension cable x 1; black MC4 photovoltaic extension cable x 112. Net weight: 389g13. Dimensions: 200 x 1.9 x 1.9cmSpecification: Package Weight One Package Weight 0.40kgs / 0.88lb One Package Size 28cm * 21cm * 5cm / 11.02inch * 8.27inch * 1.97inch Qty per Carton 6 Carton Weight 3.50kgs / 7.72lb Carton Size 30cm * 23cm * 32cm / 11.81inch * 9.06inch * 12.6inch Loading Container 20GP: 1207 cartons * 6 pcs = 7242 pcs 40HQ: 2803 cartons * 6 pcs = 16818 pcs

Read more less

1. With this charging cable, the Power 1000 Mini can be efficiently connected directly to the cars cigarette lighter socket, providing a safe and convenient charging experience while driving.2. Maximum charging power: 120 watts (12V) / 240 watts (24V)3. Cable length: 1.5 meters4. Compatible product: Suitable for DJI Power 1000 Mini5. Package contents: Car Power Charging Cable × 1Specification: Package Weight One Package Weight 0.55kgs / 1.22lb One Package Size 22cm * 16cm * 5cm / 8.66inch * 6.3inch * 1.97inch Qty per Carton 24 Carton Weight 14.30kgs / 31.53lb Carton Size 46cm * 34cm * 32cm / 18.11inch * 13.39inch * 12.6inch Loading Container 20GP: 532 cartons * 24 pcs = 12768 pcs 40HQ: 1236 cartons * 24 pcs = 29664 pcs

Read more less

1. Paired with the Power MC4 solar charging cable, the Power 1000 Mini can be directly connected to solar panels for a safe and convenient solar charging experience.2. Cable length: 50 cm3. Compatible products: Suitable for DJI Power 1000 Mini4. Utilizing standard MC4 connectors ensures a stable and reliable connection, reducing the risk of accidental disconnections during charging.5. Package contents: MC4 solar charging cable × 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 25cm * 8cm * 3cm / 9.84inch * 3.15inch * 1.18inch Qty per Carton 60 Carton Weight 7.10kgs / 15.65lb Carton Size 27cm * 34cm * 47cm / 10.63inch * 13.39inch * 18.5inch Loading Container 20GP: 618 cartons * 60 pcs = 37080 pcs 40HQ: 1434 cartons * 60 pcs = 86040 pcs

Read more less

1. When used with this charging cable, the Power 1000 Mini can be directly connected to a car battery for safe and efficient in-car charging.2. Equipped with a replaceable plug-in fuse, effectively ensuring electrical safety.3. The SDC interface features a protective cover design to effectively prevent foreign objects and dust from entering.4. Note: Due to the different generator operating logic compared to gasoline-powered vehicles, this charging cable is currently not supported for hybrid and pure electric vehicles.Specifications:1. Cable Length: 5 meters2. Input: 9 to 30 Volts, maximum current 45 Amps, maximum power 400 Watts3. Output: 9 to 30 Volts, maximum current 45 Amps, maximum power 300 Watts4. Compatible Product: Suitable for DJI Power 1000 MiniSpecification: Package Weight One Package Weight 1.30kgs / 2.87lb One Package Size 30cm * 25cm * 8cm / 11.81inch * 9.84inch * 3.15inch Qty per Carton 5 Carton Weight 7.60kgs / 16.75lb Carton Size 32cm * 27cm * 42cm / 12.6inch * 10.63inch * 16.54inch Loading Container 20GP: 734 cartons * 5 pcs = 3670 pcs 40HQ: 1705 cartons * 5 pcs = 8525 pcs

Read more less

1. Waterproof rating: IP652. Maximum power: 15W (per piece)3. Operating voltage: 18V4. Open circuit voltage: 22V5. Maximum current: 1.6A6. Short circuit current: 1.9A7. Material: PET8. Silicon material: polycrystalline siliconSpecification: Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 44cm * 24cm * 5cm / 17.32inch * 9.45inch * 1.97inch Qty per Carton 7 Carton Weight 7.00kgs / 15.43lb Carton Size 46cm * 37cm * 26cm / 18.11inch * 14.57inch * 10.24inch Loading Container 20GP: 602 cartons * 7 pcs = 4214 pcs 40HQ: 1398 cartons * 7 pcs = 9786 pcs

Read more less

1. Using semi-flexible polysilicon solar panels, light and portable, easy to use outdoors2. Integrate 5V voltage stabilizing circuit, and lead out 2 USB ports, which can be powered by external 5V devices through USB, with working indicator light3. Reserve the DC5521 power interface, which can be used to connect to a power management module or controller that supports 18V solar panels4. Comes with a variety of accessories and adapter cables for easy useParameter:1. Solar cells: polysilicon2. Surface material: semi-flexible laminate (not overbending)3. Solar panel power: 10W4. Output interface:DC5521 female port- The solar panel is not converted, and the power supply interface is directly output- Working voltage: 18V +/-5%- Working current: 600mA +/- 5% (Max)- Open circuit voltage: 21.6V +/- 5%Dual USB 5V ports:- After the solar panel passes through the 5V voltage regulator circuit, the output power supply interface- Working voltage: 5V (sufficient power and stable 5V output only if the sun is well illuminated; if there is no sunlight or the light is weak, the output voltage and power are insufficient, so it is not suitable for use)- Output current: 1.5A (voltage regulator circuit can support 5V/3A output, but limited to -solar panel power, actual use of light and loss, 2-way total output up to 1.5A)5. Product size: 435 × 200mmNote: The above parameters are tested under standard conditions (1000W/m2 radiation intensity, 25 degrees Celsius temperature, AM1.5 air quality)Specification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 46cm * 22cm * 8cm / 18.11inch * 8.66inch * 3.15inch Qty per Carton 42 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 42 pcs = 7434 pcs 40HQ: 412 cartons * 42 pcs = 17304 pcs

Read more less

1. High efficiency, outdoor waterproof, self-contained bracket, easy to install2. Connect the power management module or other control boards that support 5.5V solar panel charging or power supply, compatible with solar power managers3. Working voltage: 5.5v4. Working current: 1000mA5. Open circuit voltage: 7.2v6. Short circuit current: 1090mA7. Output interface: micro USB, USB/Type-C8. Solar power: 6w9. Application examples: It can be directly connected to low-power outdoor smart electronic devices to support 5.5V solar panels through USB ports, such as monitoring equipment, doorbells, fans, emergency lights, etc.10. Cable length: 3 meters11. Size: 225x195x17.6mminstallation steps:1. Install the stand with the screws included in the package2. Fix the solar panel on the bracket3. Adjust the angle of the panel by rotating the knob on the stand to maximize sunlight absorptionSpecification: Package Weight One Package Weight 0.82kgs / 1.81lb One Package Size 29cm * 23cm * 7cm / 11.42inch * 9.06inch * 2.76inch Qty per Carton 8 Carton Weight 7.53kgs / 16.60lb Carton Size 31cm * 48cm * 30cm / 12.2inch * 18.9inch * 11.81inch Loading Container 20GP: 597 cartons * 8 pcs = 4776 pcs 40HQ: 1386 cartons * 8 pcs = 11088 pcs

Read more less

1. The bracket can be freely rotated 360 degrees, easy to install2. Two kinds of interface design, easy to use3. High conversion efficiency, low power consumption4. Working voltage: 6V5. Working current: 830mA6. Power: 5W7. Interface: USB, Type-C/USB-C8. Waterproof rating: IP669. Size: about 17.3 x 16.3cmSpecification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 20cm * 18cm * 3cm / 7.87inch * 7.09inch * 1.18inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs 40HQ: 412 cartons * 74 pcs = 30488 pcs

Read more less

1. Applicable charging lamps: USB charging small table lamp, USB charging small fan, USB charging light bulb, charging flashlight, camping light, Bluetooth headset, etc. 2. Voltage: 5V 3. Output interface: 15cm.usb motherline 4. Battery type: single crystal solar cell board 5. Rated current: 360mA 6. Open voltage: 6V 7. Short -circuit current: 0.4A 8. Rating working voltage: 6V 9. The rated working current: 0.13A 10. Rated power: 1.8W 11. Size: 160x105x12mm 12. Weight: 170g 13. Note: The product contains only solar panels, without batteries, excluding othersSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 18cm * 12cm * 3cm / 7.09inch * 4.72inch * 1.18inch Qty per Carton 146 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 146 pcs = 25842 pcs 40HQ: 412 cartons * 146 pcs = 60152 pcs

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAhSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 10cm * 1cm / 3.94inch * 3.94inch * 0.39inch Qty per Carton 1000 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 1000 pcs = 381000 pcs 40HQ: 885 cartons * 1000 pcs = 885000 pcs

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAhSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 1000 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 1000 pcs = 381000 pcs 40HQ: 885 cartons * 1000 pcs = 885000 pcs

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAhSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 18cm * 14cm * 1cm / 7.09inch * 5.51inch * 0.39inch Qty per Carton 1000 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 1000 pcs = 381000 pcs 40HQ: 885 cartons * 1000 pcs = 885000 pcs

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAhSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 8cm * 8cm * 1cm / 3.15inch * 3.15inch * 0.39inch Qty per Carton 1000 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 1000 pcs = 381000 pcs 40HQ: 885 cartons * 1000 pcs = 885000 pcs

Read more less

Feature:1. Build your DIY-powered models / solar toys / solar displays.2. High conversion rate.3. High-efficiency output.4. Excellent weak light effect.5. Application: Science projects/Charging small DC batteries and so on.6. Portable, small size, lightweight, sturdy and durable, good quality.7. Small attenuation, good reliability and long life.Specification:The specifications of different styles and sizes are as follows:- 60 x 60mm: 5V 0.3W 60mAh- 70 x 25mm: 6V 0.2W 60mAh- 80 x 30mm: 5V 0.25W 50mAh- 84.5 x 84.5mm: 5V 0.3W 140mAh- 84 x 175mm: 5V 1.3W 250mAh- 190 x 110mm: 5V3W 600mAh- 169.5 x 116mm: 6V 3W 500mAhSpecification: Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 6cm * 1cm / 3.94inch * 2.36inch * 0.39inch Qty per Carton 1000 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 1000 pcs = 381000 pcs 40HQ: 885 cartons * 1000 pcs = 885000 pcs

Read more less

1. Build your DIY-powered models / solar toys / solar displays. 2. High conversion rate. 3. High-efficiency output. 4. Excellent weak light effect. 5. Application: Science projects/Charging small DC batteries and so on. 6. Portable, small size, lightweight, sturdy and durable, good quality. 7. Power: 3W 8. Small attenuation, good reliability and long life. Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 20cm * 1cm / 5.91inch * 7.87inch * 0.39inch Qty per Carton 120 Carton Weight 13.00kgs / 28.66lb Carton Size 45cm * 35cm * 35cm / 17.72inch * 13.78inch * 13.78inch Loading Container 20GP: 483 cartons * 120 pcs = 57960 pcs 40HQ: 1122 cartons * 120 pcs = 134640 pcs

Read more less

1. Build your DIY-powered models / solar toys / solar displays. 2. High conversion rate. 3. High-efficiency output. 4. Excellent weak light effect. 5. Application: Science projects/Charging small DC batteries and so on. 6. Portable, small size, lightweight, sturdy and durable, good quality. 7. Power: 1.5W 8. Small attenuation, good reliability and long life. Specification: Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 15cm * 10cm * 1cm / 5.91inch * 3.94inch * 0.39inch Qty per Carton 240 Carton Weight 21.00kgs / 46.30lb Carton Size 45cm * 35cm * 35cm / 17.72inch * 13.78inch * 13.78inch Loading Container 20GP: 483 cartons * 240 pcs = 115920 pcs 40HQ: 1122 cartons * 240 pcs = 269280 pcs

Read more less