Bestselling Products

Overview 1. Atmel-ICE-C is the cost effective solution for the powerful Atmel-ICE, it adopts the original ATMEL-ICE-PCBA and comes with a durable aluminium alloy enclosure. 2. Atmel-ICE-C delivers the same functionality and usability just as the ATMEL-ICE Full Kit, it is capable of debugging and programming Atmel ARM Cortex -M based Atmel SAM and AVR microcontrollers with on-chip debug capability. Key Features 1. Support JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces 2. Full source-level debugging in Atmel Studio 3. Support all built-in hardware breakpoints in the target microcontroller (number depends on the OCD module in the target) 4. Up to 128 software breakpoints 5. 1.62 to 5.5V target operation 6. USB powered 7. Provides both ARM Cortex Debug Connector (10-pin) pin-out and AVR JTAG connector pin-out Supported Software 1. Support Atmel Studio 6.2 or higher version 2. Directly supports ICC8AVR or higher version 3. Support programming HEX files generated by ICCAVR, CVAVR, IAR, etc. Supported Devices 1. Programming and on-chip debugging of all Atmel AVR 32-bit MCUs on both JTAG and aWire interfaces 2. Programming and on-chip debugging of all Atmel AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces 3. JTAG and SPI programming and debugging of all Atmel AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces 4. Programming and debugging of all Atmel SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces 5. Programming of all Atmel tinyAVR 8-bit MCUs with support for the TPI interface 6. For more details, please visit UC3, Mega, SAM , Tiny, Xmega Specifications 1. INTERFACE VOLTAGE: 1.62V ~ 5.5V 2. JTAG CLOCK: 32kHz ~ 7.5MHz 3. PDI CLOCK: 32kHz ~ 7.5MHz 4. DEBUGWIRE BAUDRATE: 4kbit/s ~ 0.5Mbit/s 5. AWIRE BAUDRATE: 7.5kbit/s ~ 7Mbit/s 6. SPI CLOCK: 8kHz ~ 5MHz 7. SWD CLOCK: 32kHz ~ 2MHz 8. PC INTERFACE: USB 2.0 high speed Package list 1. Atmel-ICE-C unit x1 2. USB type A plug to micro B plug cable x1 3. IDC flat cable with 10-pin 50-mil connector and 6-pin 100-mil connector x1 4. Multi-functional adapter board x1 5. 10pin flat cable x1 6. 10pin 100mil squid cable x1 7. 6-pin to 10-pin ISP cable x1

Read more less

OverviewThe VGA PS2 Board is an accessory board designed for testing VGA and/or PS2 interfaces. It integrates VGA connector, PS2 connector, and control interface in one small module.The VGA PS2 Board comes with ready-to-use demo codes as well.FeaturesVGA interface, PS2 interface, control interface

Read more less

OverviewThe MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V levels.Features1. I2C controlled, expands 2 signal pins as 16 I/O pins2. I2C address configurable by shorting the A0/A1/A2 jumpers3. Provides two connector options: PH2.0 terminal and/or solder pads, allows multi I2C modules to be stacked4. Onboard voltage translator, compatible with 3.3V/5V level5. Comes with development resources and manual (examples for Raspberry Pi / micro:bit / Arduino / STM32)Specifications1. Operating voltage: 5V/3.3V2. Interface: I2C3. Interrupt pins: INTA, INTB4. Expansion I/Os: 165. Dimension: 38mm × 23mm6. Mounting hole size: 2.0mm

Read more less

OverviewThis is an edge connector expansion board designed for micro:bit, breakout the I/O pins to 2.54mm pitch pinheaders for easy use.SpecificationsDimension: 82.05mm x 36.10mmThrough holes diameter: 2mm

Read more less

Features1.4 in 1, suit for DIYIRM, infrared receiver moduleTemperature SensorJoystickBuzzer2.Compatible with expansion boards like DVK5123.Connections are controlled by jumpers

Read more less

Specifications1.Solar cell type: 156 monocrystalline cell2.Surface: toughened glass3.Frame material: anodic oxidation aluminum alloy4.Back board material: 0.25mm PET5.Power: 5.0W ± 5%6.Operating voltage: 6.0V ± 5%7.Operating current: 833mA ± 5% (max)8.Open circuit voltage: 7.2V ± 5%9.Short circuit current: 916mA ± 5%10.For use with: Solar Power ManagerNote: specifications above are tested on standard condition: 1000W/m2 radiation intensity, 25℃, AM1.5 air quality.

Read more less

OverviewThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B. It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth/infrared/WiFi remote control, video monitoring, etc.Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you're almost there, our open source demo codes is ready to help you get started fast.Raspberry Pi 3 Features1. BCM2837, 1.2GHz 64-bit quad-core ARM Cortex-A532. 1GB RAM3. 10/100 Ethernet port4. 802.11n WiFi NIC5. Bluetooth 4.1 & Bluetooth Low Energy (BLE)6. HDMI port7. USB 2.0 interface x 48. Micro SD card slot9. Combined 3.5mm audio jack and composite video10. 40-pin GPIO interface11. Camera interface (CSI)12. Display interface (DSI)13. Upgraded power management, supports more peripherals (requires a 2.5A power supply or above)AlphaBot2 FeaturesAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.AlphaBot2-Base, the lower base chassis:1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring3. TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating4. N20 micro gear motor, with metal gears, low noise, high accuracy5. 5Onboard RGB LEDs, true color lighting, pretty coolAlphaBot2-Pi, the upper adapter board for controller:1. LM2596 voltage regulator, provides the Pi with stable 5V power2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors3. PCA9685 servo controller, make it more smoothly to rotate the pan head4. CP2102 UART converter, easy for controlling the Pi via UARTPackage Contents1. AlphaBot2-Pi (adapter board) x12. AlphaBot2-Base (base chassis) x13. RPi Camera (B) x14. Micro SD Card 16GB x15. Power adapter US standard 5V/3A micro x16. SG90 servo x25. 2 DOF pan and tilt kit x17. IR remote controller x18. FC-20P cable 8cm x19. USB type A plug to micro B plug cable x110. 15PIN FFC 25cm x111. AlphaBot2-Pi screws x112. Micro SD Card Reader x1 (Extra Free)13. Screwdriver x1 (Extra Free)

Read more less