Bestselling Products

1. It can be connected with GoPro action camera series, POCKET 2/1, INSTA360 action camera series, Fimi Palm 2/1, OSMO ACTION, searchlight, fill light, with 1/4 adapter, it can be matched with more action cameras and searchlight light2. GoPro interface, front and rear can be adjusted freely, dont worry about the body entering the mirror and affecting the picture3. The inner lining is equipped with a sponge pad to prevent scratches on the fuselage4. The extended card position is closed, and the installation is more stable5. Screw fixed, fit the fuselage6. Product size: 6.1 x 6.1 x 3 cm7. Product net weight: 28.8 grams

Read more less

1. Material: ABS plastic + webbing + silicone2. Applicable objects: For dogs over 3 months old3. Power supply method: Lithium battery power supply4. Remote control range: 500 meters on flat ground, 300 meters with obstacles5. Dimensions: remote control: 12.5x4.9x2.2x cm; receiver: 6.0x4.6x3.6 cm;6. Adjustable collar diameter: 7-23 cm7. The function keys do not need to be switched, and are easy to operate. Three functions (sound/vibration/electrostatic pulse) have separate buttons to stop bad habits of dogs in time8. The cumulative time of wearing each day is no more than 10 hours. Please remove the receiver when not using for a long time9. Product configuration: remote control x1, receiver x1, collar x1, charging cable x1, test light x1, Chinese manual x1

Read more less

1. Material: ABS+nylon webbing2. Function: collar, dog training device, barking control device3. Power source: USB power supply/built-in battery power supply4. The product can be charged repeatedly5. Lightly press for 0.5 seconds to turn on, long press to turn off, 7 levels of sensitivity adjustment, 3 indicator lights at the same time, it is 7 levels, 1 to 6 levels and so on6. The product has built-in large-capacity lithium battery, up to 60 days of long standby time7. The diameter of the neckband is 35 cm larger and 6 cm smaller; suitable for all dogs8. With waterproof function, please rest assured to use

Read more less

1. Material: ABS+nylon webbing2. Function: collar, dog training device, barking control device3. Power source: USB power supply/built-in battery power supply4. The product can be charged repeatedly5. Lightly press for 0.5 seconds to turn on, long press to turn off, 7 levels of sensitivity adjustment, 3 indicator lights at the same time, it is 7 levels, 1 to 6 levels and so on6. The product has built-in large-capacity lithium battery, up to 60 days of long standby time7. The diameter of the neckband is 35 cm larger and 6 cm smaller; suitable for all dogs8. With waterproof function, please rest assured to use

Read more less

Specification:1. Power source: USB charging/battery power2. Built-in battery: 300mAh lithium battery3. Neck strap size: 25-27 cm, suitable for most pets4. Waterproof capability: IP7 waterproof levelDescription:We will use instructions to provide you with detailed products so that you can achieve the best results in the shortest possible time. In addition, the product's strong waterproof ability allows you to swim with your pet in the pool or the sea and enjoy diving.Training collars are used for training dogs, not for punishment. There are three options for dog training, beep, vibration, and static shock. Static shock is always used as the last option, or not used. If you do not want to use a static impact collar, we strongly recommend that you use the vibration training mode.Packing List:1 X remote control transmitter1 X receiver collar1 X adjustable TUP belt1 X rechargeable USB charging cable1 X charger1 X contactor1 X manual

Read more less

1. Product material: ABS, PET, silicone 2. Adhere to the concept of environmental protection, use environmentally friendly material desiccant box, mild material, strong moisture absorption and moisture resistance, effectively protect pet food, slow down food oxidation, lock in freshness, and lock in nutrition. 3. The desiccant particles have good strength and are not easy to pulverize. Using PET cotton + ABS dual anti-breakage design, easy to install, and effectively prevent the desiccant from being damaged. 4. Connect to Mijia APP, when the desiccant expires, the mobile phone will remind you smartly. 5. Product size: 104??14mm 6. Product weight: 66g

Read more less

1. Size: 12.5 x 1.3cm2. Net weight: 29g3. Lamp beads: Woods black mirror filters 365nm purple light4. Battery: Built-in rechargeable lithium battery (200mAh)5. Material: stainless steel6. Function: detect cat moss, blackhead, fungus, anti-counterfeiting label, currency check, jade, fluorescent agent, etc.7. Charging method: USB direct charge8. Equipped with high-tech Woods lamp and black mirror, emitting 365nm waveband purple light9. The flashlight adopts USB direct charging power supply mode, which is simple and fast. 10. Built-in 200 mAh rechargeable lithium battery, durable11. Magnetic tail cap, pen clip design, portable

Read more less

1. Easy to operate, convenient to use2. PE plastic material, wear-resistant and durable3. With indicator design4. Use: watch demagnetization5. Material: PE, metal6. Size: white model about 13.7 x 6.5 x 8cm, blue model about 11 x 6 x 3.5cm7. Weight: white model is about 379g, blue model is about 231gOperation method：White professional model：1. Turn on the power and put the watch face up into the demagnetizer2. Press and hold the green button for 3-5s, and put the watch through the hole in the middle of the demagnetizer slowly for not too long.3. After demagnetization, release the green button and turn off the power.4. If the watch is still magnetized, it is recommended not to demagnetize the watch for the second time, but wait for a few hours or the next day to determine if there is any effect before deciding whether to demagnetize the watch again.Blue household models:1. Turn on the power, press and hold the red switch2. Hold the watch in your hand above the demagnetizer, move it left and right, the distance is about 2cm, the moving speed is 3-5 seconds / time, repeat twice3. Flip the watch up and down, left and right several times to demagnetize various parts of the watch.4. After demagnetization, release the red button and turn off the power.5. After one operation, use the compass to detect, if there is still a magnetic phenomenon, it is recommended not to carry out the second time immediately, but to wait for a few hours or the next day to judge whether there is any effect, and then decide whether to demagnetize again.5. The demagnetizer can not be operated continuously for more than 40s, there will be a slight heating phenomenon in the demagnetization process, so it is necessary to wait for complete cooling before demagnetizing again.

Read more less

1. Fabric: high load bearing mesh2. Lightweight and labor-saving, easy to store, skin-friendly fabric, cool and comfortable3. Anti-rollover and tear-resistant, triangular structure, will not roll over even when sitting cross-legged4. Weight: 280 cm about 924 grams, 400 cm about 1180 grams 5. Loading weight: about 300kg6. Accessories: D-shaped buckle x 3, 3m strap x 3, storage bag x 1

Read more less

1. Input: 100-240V 1.5A, 50/60Hz2. Output: 42V 2A3. Material: environmentally friendly plastic PVC4. Scope of use: suitable for 8-inch KUGOO, S1S2S3, ETWOW electric scooters, or the battery is a 42V lithium battery pack, and the charging port diameter is 5mm DC head5. Description: the 8.8AH battery pack takes about 4.5-5 hours to be fully charged. When the charger is working, the indicator LED light is red, and turns green when fully charged. the charger will automatically stop working when fully charged (it is normal for the charger to get hot during charging)6. Output plug: about 5mm in diameter, about 2.2mm in inner diameter7. Size: about 13.5x6x3.2cm8. Weight: about 230g

Read more less

1. This ignition switch with key and lanyard is made of high quality plastic and metal material, very durable and reliable, not easy to break, long service life2. Material: ABS+Metal3. Cable length: 1.2 meters4. Function: Control the start and stop of the engine. Safety ropes can shut down the engine in an emergency5. Installation location: at the center console of the ship6. Scope of application: For Johnson Evinrude OMC7. Precautions for use: Insert the key, turn the key off, press down and hold, and then insert the Bombardier flameout cord. Note: The Bombardier key must be inserted into the flameout cord before it can be turned, otherwise the internal spring may become loose. In this case, a short circuit will occur.

Read more less

1. Material: UV-proof umbrella cloth, waterproof and anti-corrosion polyester cloth2. Function: replace outdoor sunshade garden umbrella leisure umbrella umbrella cloth3. High quality polyester fabric, UV30+ protective umbrella canopy, effectively block harmful UV rays4. High color fastness, not easy to fade5. Detachable and washable, easy to clean and assemble after use, no tools required.6. Suitable for wooden, steel and aluminum umbrella stand7. Note: Product does not include umbrella stand

Read more less

1. Material: UV-proof umbrella cloth, waterproof and anti-corrosion polyester cloth2. Function: replace outdoor sunshade garden umbrella leisure umbrella umbrella cloth3. High quality polyester fabric, UV30+ protective umbrella canopy, effectively block harmful UV rays4. High color fastness, not easy to fade5. Detachable and washable, easy to clean and assemble after use, no tools required.6. Suitable for wooden, steel and aluminum umbrella stand7. Note: Product does not include umbrella stand

Read more less

1. Input: 100-240VAC 50/60Hz2. Output: 42V/2A3. Scope of application: suitable for Xiaomi Mijia M365 & Ninebot ES1/ ES24. Indicator status: red light turns green when fully charged5. Size: about 10 x 6 x 8cm

Read more less

1. Portable, lightweight, multi-color, suitable for various face shapes, firm material, can be worn for a long time.2. Does not put any weight on your nose and is very comfortable to wear.3. The nose pads are made of silicone material. So, it doesnt slip off and hangs securely on the nose. It does not press on the bridge of the nose to create a red mark4. Mainly made of PC and silicone.5. Lens material: resin6. Applicable gender: unisex

Read more less

1. 6P PVC fabric is preferred, BPA is rejected, and children can play healthily2. Printed with safe ink, the color is bright and the odor is reduced3. Rebound air plug, no air leakage when inflated4. The design of the inflatable seat makes it more comfortable for babies to sit5. Material: 6P PVC6. Suitable age: 3 years old +7. Product thickness: 0.18mm8. Inflatable size: 95 x 65 x 22CM/Inflated inner diameter: 54 x 31CM9. Deflated size: 100 x 70cm10. Gram weight: 0.34kg, bearing 18kg

Read more less

1. High Load Capacity: our skateboard hangers are made of reinforced thermoplastic with stainless steel screws and bolts to ensure your skateboard is securely displayed on the wall2. Screws are sized to fit most skateboards: No need to re-drill your precious collectibles, autographs or limited edition artboards3. Easy installation: the whole installation process can be completed in 5 minutes4. Wide range of applications: skateboard wall mount can be installed in living room, bedroom, deck or garage, both to decorate the room and save space5. Give your skateboard a floating effect on the wall6. Material: ABS7. Note: The product only includes the bracket, not the skateboard8. Size: 12x12x3cm

Read more less

first generation:1. Material: aluminum alloy+ABS plastic2. Applicable to: bicycles, folding bikes, mountain bikes3. Ringing tones are crisp and loud, with simple appearance4. Suitable for handlebar pipe diameter between 21-23 mm, easy to install5. You can put the tracker in the bell to find the bike at any time6. Weight: 23 g7. Size: 36 x 61mm8. Note: only the bell, not the tracker

Read more less

Second generation: 1. Material: copper alloy + ABS plastic 2. With waterproof seal to protect your tracker 3. Pure copper material, durable and melodious 4. You can put the tracker in the bell to find the bike at any time, the hidden design is not easy to find 5. Suitable for handlebar diameter of 22.2mm 6. Dimensions: 39 x 49 x 56mm 7. Weight: 40.4 grams 8. Note: Bells only, trackers not included

Read more less

1. 3-layer composite support fabric, providing support, fixing the ulna and reducing pressure2. Adjustable tape, can be adjusted according to their own needs free elasticity, applicable to different scenes3. U-shaped reinforcement design, more suitable for sports and injury recovery4. Fine fabric, uniform force, not abrasive hands5. Material: OK cloth6. Size: reinforced model S about 31 x 5cm, reinforced model M about 33 x 5.4cm, comfortable model S about 29.5 x 4.2cm, comfortable model M about 31.5 x 4.5cm7. Suitable for wrist circumference: S about 14-19cm, M about 18-22.5cm8. Weight: about 40g

Read more less

1. Stainless steel + aluminum alloy material, hard and not easy to deformation, beautiful and practical2. Suitable for outdoor barbecue, camping, mountaineering and other outdoor use3. Easy to clean, easy to operate4. High hardness, not easy to break, and comfortable grip5. Folding design, the furnace head bracket can be folded for storage, four-foot support, placed smoothly6. Easy to carry, with a nylon belt for storage7. The square line is 43.5 cm long, 20.5x10 cm overall, and weighs 342 grams8. The Lotus line is 40 cm long, 10.5x12.8 cm overall, and weighs 468 grams

Read more less

1. Charging port board replacement for ZTE Blade A7S 2020. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Fitbit Versa 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the watch. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means watch apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in watch. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. SIM Card Tray + SIM Card Tray for OnePlus 10 Pro NE2210 NE2211 NE2213 NE2215. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Volume button & power button flex cable replacement part. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. LCD flex cable ribbon replacement for Samsung Galaxy S23 Ultra 5G SM-S918 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. SIM card reader board for iPhone 14 2. Replace your broken or unusable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Band 6 / Honor Band ES 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Xiaomi Mi Watch / Watch Color Sport / Watch Revolve Active 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Fingerprint sensor flex cable for Xiaomi Poco X3 / Poco X3 NFC. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Fingerprint sensor flex cable for Xiaomi Redmi Note 11 4G Global / Redmi Note 11s 4G / Poco M4 Pro 4G. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Fingerprint sensor flex cable for Xiaomi Redmi Note 11 4G Global / Redmi Note 11s 4G / Poco M4 Pro 4G. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Material: polyester fiber, cotton2. Applicable age: 0-2 years old3. Two styles, you can choose according to your needs4. Fixed sleeping position, pure cotton fabric, comfortable and breathable5. Soothe the baby and give the baby a sense of security6. The neck groove is low, which fits the baby's cervical spine7. Zipper design, easy to remove and wash8. Detachable design for easy storage and cleaning9. Dimensions: 45 x 28 cm, 45 x 68 cm10. Weight: 150g, 450g

Read more less

1. RF coaxial pigtail jumper or antenna extension cable2. Cable type: RG583. Insulation material: PVC4. Cable length: 0.5m, 1m, 1.5m, 3m, 5m, 10m5. Applications- GSM system, GPS navigation system, wireless communication system, Antennas, car radio.- Test equipment microwave components, data transmission, LAN system, satellite transmission, aviation equipment,etc.

Read more less

1. Designed for the Logitech G502 gaming mouse. 2. Made of 1680D Oxford cloth + EVA shell, ten-grade compression, more wear-resistant. 3. The interior is cast by 3 sets of molds. The storage room is made of soft and external hard EVA material and is shockproof. 4. EVA material, semi-waterproof, environmentally friendly, no odor. 5. The exclusive storage area for the inner part of the attachment is more well-organized.

Read more less

1. Power jack connector with flex cable for HP Omen 15-CE 924112-F15 924112-S15 924112-T15 924112-Y15 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. Product material: ABS 2. Interface technology: metal 3. Resolution: 8K 4. Lightweight and portable 5. Product size: 2.6 x 2.2 x 1cm

Read more less

1. Wear-resistant, dirt-resistant, shock-proof and drop-proof2. The inner layer of double-sided sponge can be placed or disassembled according to the size of the earphone3. The rubber wrist strap is thicker and thicker, strong and reliable, and easy to hold4. Built-in hook and loop fastener elastic buckle to fix the equipment5. Fully protect the equipment from general scratches, dirt and abrasion6. Material: nylon7. Size: about 280x225x130mm

Read more less

1. Interface: USB 2.02. Sensor: SPCP-1993. Acceleration: 20G4. High-speed motion detection: 100IPS5. Left and right button life: 300W times6. RGB lighting: 6 monochromatic lights, each different color represents different DPI7. DPI: 800 green, 1600 purple, 2400 blue, 3200 red, 4800 cyan, 6400 yellow8. Compatible system: Windows 98/2000 / ME / NT / XP / Win 7 / Win 8 / Win 10 / Mac OS and other OS9. Cable length: 1.5M10. Product size: 125x76x41mm11. Weight: 131g

Read more less

1. Suitable for Sony WH-1000XM2/WF-H800/MDR-XB950AP/MDR-10R/MDR-10RBT/MDR-10RC/NC200D/MDR-100AAP/MDR-Z1000 and other headphones 2. Oxygen-free copper wire, anti-interference, strong transmission signal 3. Durable 4. Wire diameter: about 3mm 5. Cable length: about 1.5m

Read more less

1. Input compatibility: devices that support 3.5mm audio output, such as for PS4 / Xbox One controllers, PCs, laptops, iPhones and Android phones, etc. 2. Output compatibility: Only for Logitech G433/ G233/ G Pro / G Pro X headphones. Definitely not for Logitech G633/G933/A10/A40 3. With volume control and mute switch: instantly upgrade your earphones to professional earphones for gaming, business, and taking calls anytime, anywhere, etc. 4. Wire length: 2m 5. Weight: 30g

Read more less

1. US version computer keyboard 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts 5. Note: with RGB Keyboard Backlight

Read more less

1. Interface: USB 3.02. Transfer rate: 1000MB/s3. Support USB2.0, USB3.0, can output 1920x1080P4. Support USB3.0 input of OTG Android phones, desktop computers, and laptops5. Support video output: HDMI signal, support HDMI 1.3b6. Supported display functions: display, extended display, mirror display7. HDMI output resolution: support 480P / 576P / 720P / 1080P8. Support computer operating system: Windows XP, Vista, win7, win8, win10, mac, Android system9. Support multi-screen function, synchronous output to HDTV, projector, etc.

Read more less