DIY Parts & Components

1. Shaft usage: 6mm x 8mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: Aluminum

Read more less

1. Shaft usage: 6mm x 10mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: Aluminum

Read more less

1. Shaft usage: 8mm x 8mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: Aluminum

Read more less

1. Shaft usage: 6mmx6mm 2. Length: 25mm 3. Diameter:20mm 4. Material: aluminum

Read more less

1. Shaft usage: 6.35mm x 6.35mm 2. Length: 25mm 3. Diameter: 20mm 4. Material: Aluminum

Read more less

1. Mounting size: 22mm 2. Color: Black + red 3. PBT material 4. Insulation resistance: > / = 2M ohms 5. Permitted Voltage: + / - 20% (AC 220V) 6. Brightness: > / = 100cd/m2 7. Electrical Life: 30000 hours 8. Dielectric Strength: 2.5KV (AC RMS) 9. CTI: > / = 100 10. Protection grade: IP65 11. Operating frequency: AC 50~60Hz 12. Dimensions: 5.0 x 3.6 x 3.6cm 13. Weight: 18g

Read more less

1. Mounting size: 22mm 2. Color: Black + red 3. PBT material 4. Insulation resistance: > / = 2M ohms 5. Permitted Voltage: + / - 20% (AC 220V) 6. Brightness: > / = 100cd/m2 7. Electrical Life: 30000 hours 8. Dielectric Strength: 2.5KV (AC RMS) 9. CTI: > / = 100 10. Protection grade: IP65 11. Operating frequency: AC 50~60Hz 12. Dimensions: 5.0 x 3.6 x 3.6cm 13. Weight: 18g

Read more less

1. Mounting size: 22mm 2. Color: Black + red 3. PBT material 4. Insulation resistance: > / = 2M ohms 5. Permitted Voltage: + / - 20% (AC 220V) 6. Brightness: > / = 100cd/m2 7. Electrical Life: 30000 hours 8. Dielectric Strength: 2.5KV (AC RMS) 9. CTI: > / = 100 10. Protection grade: IP65 11. Operating frequency: AC 50~60Hz 12. Dimensions: 5.0 x 3.6 x 3.6cm 13. Weight: 18g

Read more less

Dimensions:1 Type:Bridge Rectifier Model Number:KBPC5010 Peak Non-Repetitive Reverse Voltage:1 Application:Motorcycle Mean On-State Current:35A Peak Repetitive Reverse Voltage:1 Unit Type: piece Package Weight: 0.1kg (0.22lb.) Package Size: 8cm x 8cm x 3cm (3.15in x 3.15in x 1.18in)

Read more less

1. Product name: TPA6120 headphone amplifier board2. Chip type: TPA6120A23. Input voltage: Dual DC / AC 12-24V(recommend dual DC / AC 2V 30W)4. Output impedance: 8-600 Ohm5. Protection function: Short circuit protection, over temperature protection 6. Size: 80*52*19mm7. Weight: 45g

Read more less

1. Brand new and high quality 2. The male ends meant for insertion into standard female sockets and the female ends are meant for insertion onto standard male headers 3. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers 4. Made of high-grade copper wire material for safe and durable to use.

Read more less

1. Power supply: DC dual power supply ± 58 ± 70v2. Rated output power: 500w (± 65v power supply, 4 ohm load, 10% deformation)3. Efficiency: greater than 90%4. S / N ratio: 90db5. Total harmonic distortion:380w (+/- 65 power 4 ohm speaker, distortion <0.1%)280w (+/- 65 power 8 ohm speaker, distortion <0.1%)6. Frequency range: 20Hz-20kHz7. Voltage magnification: 36 times8. Input sensitivity 1.5v (RMS)9. Output short circuit protection: yes10. Output DC bias protection Speaker protection: yes11. Overheat protection: Yes, the temperature of the radiator is higher than 100 degrees Celsius, turn off the output!12. Product size: about 100 × 50 × 30mm13. Net weight: 100g

Read more less

1. Made of quality material, durable to use. 2. 6 pins pitch connector, 1x5 type 5 keys. 3. White sticker can peel off for adhesive mounting. 4. The back can be firmly fixed to the chassis surface. 5. Used widely in industrial and home electronic equipments, instrument, etc.

Read more less

1. Material: Electronic components + PCB2. Working voltage: 5V3. Number of pulses per revolution: 204. The rotary encoder can count the number of output pulses during rotation in the forward and reverse directions by rotation. Unlike the potentiometer, the rotation count is unlimited. With the buttons on the rotary encoder, it can be reset to the initial state, that is, counting from 0.5. Working principle: The incremental encoder is a rotary sensor that converts the rotational displacement into a series of digital pulse signals. These pulses are used to control angular displacement. The conversion of angular displacement in the Eltra encoder uses the photoelectric scanning principle. The reading system is based on the rotation of the radial index disc (code disc) composed of alternating light-transmitting windows and opaque windows, and is simultaneously illuminated vertically by an infrared light source, and the light projects the image of the code disc onto the surface of the receiver . The receiver is covered with a layer of diffraction grating, which has the same window width as the code wheel. The receiver's job is to feel the changes produced by the rotation of the disc, and then convert the light changes into corresponding electrical changes. Then the low-level signal is raised to a higher level, and a square pulse without any interference is generated, which must be handled by an electronic circuit. The reading system usually uses a differential method, that is, comparing two different signals with the same waveform but a phase difference of 180 ° in order to improve the quality and stability of the output signal. The reading is formed based on the difference between the two signals, thereby eliminating interference.

Read more less

1. 4G module support functions: Internet access and other services, with packet data, SMS and WIFI hotspot functions. This series of modules are widely used in the security monitoring industry. 2. 4G security monitoring module 3. External 5-12V DC power supply 4. 4G+WIFI status indicator 5. Support 4G/3G/2G+Wi-Fi wireless access 6. 4G wireless transmission rate up to 150Mbps 7. With 1 RJ45 interface, 10/100M adaptive 8. Five-mode 4G wireless communication WIFI module, which can provide users with high-speed wireless data 9. Support SD function, support SMS service, support USSD function 10. Support GPRS/EDGE/TD-SCDMA/WCDMA/LTE data services 11. Support MODEM, NDIS, ECM dialing mode 12. Support WLAN function, allow 32 users to access, support multiple operating systems: Windows\Android\Linux 13. Structure size: 51 x 38 x 13.40mm 14. Weight: about 20g

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM 520 kB SRAM 4. KEY: Reset, IO34, IO35, IO39 5. Power indicator lamp: Red 6. USB to TTL: CP2104 7. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier 8. Working voltage: 2.3V-3.6V 9. Working current: About 60mA 10. Sleep current: 1mA 11. Working temperature range: -40 degree C ~ + 85 degree C Power Supply Specifications 1. Power Supply: USB 5V/1A 2. Charging current: 500mA 3. Battery: 3.7V lithium battery (not included) Wi-Fi Description 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth Description 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification Description 1. Wifi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Typ:e AES/RSA/ECC/SHA 4. Frmware upgrade: UART download/OTA???Through network/host to download and write firmware 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOSapp OS: FreeRTOS Package list 1. TTGO TS ESP32 Module x 1 2. Power cable x 1

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM: 520 kB SRAM 4. KEY: Reset, IO34, IO35, IO39 5. Display: 1.44 /1.8 inch ST7735 LCD TFT display 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Modular interface: SD card, UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier 9. Working voltage: 2.3V-3.6V 10. Working current: About 60mA 11. Sleep current: 1mA 12. Working temperature range: -40 degree C ~ +85 degree C Power Supply Specifications 1. Power Supply: USB 5V/1A 2. Charging current: 500mA 3. Battery: 3.7V lithium battery(not inlcuded) Wi-Fi Description 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth Description 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification Description 1. Wifi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Typ:e AES/RSA/ECC/SHA 4. Frmware upgrade: UART download/OTA, Through network/host to download and write firmware 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOSapp OS: FreeRTOS SST7735 Description 1. Size: 1.8 inch diagonal LCD TFT display 2. Resolution: 128x128/160x80 resolution, 16-bit/18-bit (262,144) color 3. Voltage Onboard: 3.3V at 150mA LDO regulator 4. Bus 5 wire SPI digital interface: CS:16, A0:17, SDA:23, SCK:5, RST:9 5. Dissipation Current draw is based on LED backlight usage: with full backlight draw is ~25mA Package list 1. TTGO TS ESP32 Module x 1 2. Power cable x 1

Read more less

1. Product series: camera module 2. Model: OV2640 3. Purpose: video recorder 4. Power: 3.3W 5. Adapt to T-Camera Plus ESP32-DOWDQ6 8MB SPRAM

Read more less

1. Product series: camera module 2. Model: OV2640 3. Purpose: video recorder 4. Power: 3.3W 5. Adapt to T-Camera Plus ESP32-DOWDQ6 8MB SPRAM

Read more less

1. Product series: camera module 2. Model: OV2640 3. Purpose: video recorder 4. Power: 3.3W 5. Adapt to T-Camera Plus ESP32-DOWDQ6 8MB SPRAM

Read more less

1. The adjustable boost module, can be easily installed in a variety of small equipment inside. 2. Output current: 2A. 3. Input voltage: 2-24V. 4. Output voltage: 5 - 28V. 5. Conversion efficiency: 93 percent.

Read more less

Features: 1. The USB port 5V power supply can be converted to 12V output (the output port needs DIY welding). With boost converter circuit, stable quality 2. This model is an improved version, using professional boost chip, larger shielding inductance and Schottky diode, it is more stable to use 3. Product use: USB 5V power supply can be converted to 12V output, power cord of DIY car driving recorder, electronic dog can be connected, and power supply for some 12V household equipment with power of 10-12W. Specifications 1. Interface type: USB input x 1 2. Input interface: USB 3. Output interface: wiring board 4. Input voltage: 5V 5. Input current: 2A-3A 6. Output voltage: 12V 7. Output current: 1A (max) 8. Product material: With professional IC boost circuit, increased shielding inductance, high current Schottky diode, more stable performance

Read more less

Features: 1. Main chip: S76G Lora Chip 2. Button: BOAT 3. Auto clock: 26 MHz active crystal 4. Antenna Model: LORA 868 MHZ GPS Antenna 5. Temperature: -45-80 Degrees C 6. Size: 78.12 x 25.40 x 62.67mm Microcontroller: 1. STM32L073Z 2. High-performance ARM Cortex--M + 32-bit RISC core, working frequency 32MH 3. 192 kilobytes of flash 4. USB2.0 Full Speed a??a??Device / Host 5. 20 kbytes sram 6. Serial Wire Debug (SWD) and JTAG LORA chip: 1. Semtech SX1276 2. LoRa modem 3. 20dBm constant RF output vs. V power supply 4. Programmable bit rate up to 37500bps 5. High sensitivity: as low as -137dBm 6. Leader detection payload up to 128 bytes, automatic RF sensing with using ultra-high-speed AFC, and CAD anti-blocking ability GNSS chip: 1. CXD5603GF 2. GPS / GLONASS receiver 3. Ultra-low power 4. Supports SBAS / QZSS

Read more less

Features: 1. Main chip: S76G Lora Chip 2. Button: BOAT 3. Auto clock: 26 MHz active crystal 4. Antenna Model: LORA 868 MHZ GPS Antenna 5. Temperature: -45-80 Degrees C 6. Size: 78.12 x 25.40 x 62.67mm Microcontroller: 1. STM32L073Z 2. High-performance ARM Cortex--M + 32-bit RISC core, working frequency 32MH 3. 192 kilobytes of flash 4. USB2.0 Full Speed a??a??Device / Host 5. 20 kbytes sram 6. Serial Wire Debug (SWD) and JTAG LORA chip: 1. Semtech SX1276 2. LoRa modem 3. 20dBm constant RF output vs. V power supply 4. Programmable bit rate up to 37500bps 5. High sensitivity: as low as -137dBm 6. Leader detection payload up to 128 bytes, automatic RF sensing with using ultra-high-speed AFC, and CAD anti-blocking ability GNSS chip: 1. CXD5603GF 2. GPS / GLONASS receiver 3. Ultra-low power 4. Supports SBAS / QZSS

Read more less

Features: 1. Main chip: S76G Lora Chip 2. Button: BOAT 3. Auto clock: 26 MHz active crystal 4. Antenna Model: LORA 868 MHZ GPS Antenna 5. Temperature: -45-80 Degrees C 6. Size: 78.12 x 25.40 x 62.67mm Microcontroller: 1. STM32L073Z 2. High-performance ARM Cortex--M + 32-bit RISC core, working frequency 32MH 3. 192 kilobytes of flash 4. USB2.0 Full Speed a??a??Device / Host 5. 20 kbytes sram 6. Serial Wire Debug (SWD) and JTAG LORA chip: 1. Semtech SX1276 2. LoRa modem 3. 20dBm constant RF output vs. V power supply 4. Programmable bit rate up to 37500bps 5. High sensitivity: as low as -137dBm 6. Leader detection payload up to 128 bytes, automatic RF sensing with using ultra-high-speed AFC, and CAD anti-blocking ability GNSS chip: 1. CXD5603GF 2. GPS / GLONASS receiver 3. Ultra-low power 4. Supports SBAS / QZSS

Read more less

Hardware Specifications: 1. Chipset: ESPRESSIF-WROVER-B 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash 4MB / PSRAM 8MB 3. SRAM: 520KB SRAM 4. Button: reset 5. Power indicator lamp: red 6. USB to TTL: CH9102F QFN24 7. Modular interface: UART, SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier 8. On-board clock: 40MHz crystal oscillator 9. Working voltage: 2.7V-3.6V 10. Working current: about 30mA 11. Working temperature range: -40~ +85 Degrees Celsius 12. Size&weight: 40.27x31.07x8.13mm, 6.42g Power Supply Specifications: 1. Power Supply: USB 5V/1A 2. Charging current: 500mA 3. Battery: 3.7V lithium battery WiFi Description: 1. Standard FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n(802.11n, speed up to150Mbps)A-MPDU and A-MSDU polymerization, support 0.4??S Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth Description: 1. Protocol: meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification Description: 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type : AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA???Through network/host to download and write firmware??? 5. Software Development: Support cloud server development /SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User Configuration: AT + Instruction set, cloud server, Android/iOS APP 8. OS: FreeRTOS

Read more less

Features 1. Added 16340 electrical socket to the ordinary development board, which can use the corresponding rechargeable 16340 battery to power the system, which is convenient, beautiful and practical. 2. The product is compact and the size design extends the size design of this battery holder. 3. All IO ports are reserved from both sides, compatible with the distance between MINI D1 extended version and breadboard. Grove interface is reserved at the same time, compatible with Grove interface module, and T-Watch sensor module (T-Watch special connection cable needs to be connected). 4. We will design more convenient expansion modules to match the motherboard to facilitate the realization of various ideas for learners. Hardware Specifications 1. Chipset: ESP8266EX 2. USB to TTL: CH340K 3. Charging chip: TP4054 4. FLASH: 4MB 5. Size: 43.96x25.63x20.80mm 6. Weight:7.87g Power Supply 1. Battery: 16340 3.7V rechargeable lithium battery(not included) 2. Battery switch:Yes 3. USB: Micro USB Wi-Fi 1. External antenna mount: With IPEX antenna mount 2. WIFI antenna: Ceramic antenna

Read more less

1. Mini WS2812 RGB LED shield includes colorful LEDs that can add some pizzazz to your electronics projects. 2. It is designed with 7 circular RGB lights, when the lights are in full flash, it is like a cool scene of a collection of dragon balls. 3. IO ports are reserved, compatible with the distance between MINI D1 extended version and breadboard. 4. We will design more convenient expansion modules to match the motherboard to facilitate the realization of various ideas for learners 5. Compact design, portable size, easy and convenient to carry and use.

Read more less

About The ProductHardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. PCIE-SIM7070G module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2SIM7070GSIM7070G suitable global: 1. NB-IOT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 2. CAT-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 3. GSM/GPRS/EDGE: 850/900/1800/1900MHz 4. GNSS: C/A CODE - GPS L1:1575.42+/-1.023MHz - GLONASS L1: 1598.0625~1605.375MHz - BDS B1: 1559.052~1591.788MHz - GALILEO L1:1575.42+/-1.023MHz

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS PCIE-SIM7600JC suitable for Japan Packing list 1. PCIE-SIM7600JC module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. SIM7000G-PCIE module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS SIM7600A suitable for North America: 1. LTE-FDD: B2/B4 2. UMTS/HSPA+: B2/B5 Packing list 1. SIM7600A-PCIE module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS SIM7600SA suitable for Australia/New Zealand/South America 1. LTE-TDD: B40/B66 2. LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28 3. UMTS/HSPA+: B1/B2/B5/B8 4. GSM/GPRS/EDGE: 850/900/1800/1900MHz Packing list 1. SIM7600SA-PCIE module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB /16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS SIM7600E suitable for EMEA/Kor/Thailand: 1. LTE-TDD: B38/B40/B41 2. LTE-FDD: B1/B3/B5/B7/B8/B20 3. UMTS/HSPA+: B1/B5/B8 4. GSM/GPRS/EDGE:B3/B8 Packing list 1. SIM7600E-PCIE module x 1 2. LTE antenna x 1 3. GPS antenna x 1 4. Screw x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 4MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. T-PCIE 4MB x 1 2. Charging cable x 1 3. Needle Pin x 2

Read more less

Hardware specifications 1. Chipset: ESP32-WROVER-B, AXP192 power management chip 2. Flash: 16MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Button: PWR power switch, reset 6. USB to TTL: CP2104 7. Vehicle clock: 40MHz crystal oscillator 8. Peripheral equipment: SIM Nano card slot, Mini PCIE card slot 9. Antenna: Onboard antenna (default) 10. Working voltage: 2.7V to 3.6V 11. Sleep current: About 700ma 12. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 13. Dimensions: 75 x 33 x 10.5 mm 14. Weight: 14.5g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. Charging IC: AXP192 5. JST connector: 2-pin 2.0mm 6. USB: Type C wireless online 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP32 chip) 2. Protocol: 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz-2.5GHz (2400M-2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Compliant with Bluetooth v4.2BR/EDR and BLE standards 2. Radio frequency: NZIF receiver Class-1 with sensitivity of -97dBm, Class-2&Class-3 transmitter AFH 3. Audio: CVSD&SBC audio Software specifications 1. Wi-Fi mode: Workstation / SoftAP / SoftAP + Station / P2P 2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS 3. Encryption method: AES / RSA / ECC / SHA 4. Firmware upgrade: UART download/OTA (download and write firmware via network/host) 5. Software development: support cloud server development / SDK for user firmware development 6. Network protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User configuration: AT + command set, cloud server, Android / iOS app 8. Operating system: FreeRTOS Packing list 1. T-PCIE 16MB x 1 2. Charging cable x 1 3. Needle Pin x 2

Read more less

Hardware specifications 1. Chipset: ESPRESSIF-ESP32-S2 2. Flash: 4MB 3. Static SRAM: 8MB 4. SRAM: 520 kB SRAM 5. Buttons: power switch, base, start, custom 6. External device: TF card 7. USB to TTL: CH340C 8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC 9. Vehicle clock: 32.768KHz crystal oscillator 10. Working voltage: 2.7V to 3.6V 11. Operating temperature range: -40 degrees Celsius ~ + 85 degrees Celsius 12. Dimensions: 63 x 30 x 6.6mm 13. Weight: 7g Power Specifications 1. Power input: USB 5V / 1A 2. Charging current: 500 mA 3. Battery input: 3.7-4.2V 4. JST connector: 2-pin 1.25mm 5. USB: Type C USB WiFi 1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (esp32 chip) 2. Protocol: 802.11 b / g / n (802.11n, speed up to 150Mbps, A-MPDU and A-MSDU aggregation, support 0.4uS guard interval 3. Frequency range: 2.4GHz~2.5GHz (2400M`2483.5M) 4. Transmit power: 22dBm 5. Communication distance: 300m

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM: 520 kB SRAM + 8MBytes External SPRAM 4. KEY: Reset 5. Dispaly: IPS Panel ST7789/1.3 Inch 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. On-board clock: 40MHz crystal oscillator 10. Working voltage: 2.3V-3.6V 11. Working current: About 160mA 12. Working temperature range: -40 degree C ~ +85 degree C 13. Size: 69.13 x 28.41 x 8.45mm 14. Mic: MSM261S4030H0 15. SD card: Integrated external SD card slot Power management Chip IP5306 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery(not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM: 520 kB SRAM + 8MBytes External SPRAM 4. KEY: Reset 5. Dispaly: IPS Panel ST7789/1.3 Inch 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. On-board clock: 40MHz crystal oscillator 10. Working voltage: 2.3V-3.6V 11. Working current: About 160mA 12. Working temperature range: -40 degree C ~ +85 degree C 13. Size: 69.13 x 28.41 x 8.45mm 14. Mic: MSM261S4030H0 15. SD card: Integrated external SD card slot Power management Chip IP5306 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery(not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM: 520 kB SRAM + 8MBytes External SPRAM 4. KEY: Reset 5. Dispaly: IPS Panel ST7789/1.3 Inch 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. On-board clock: 40MHz crystal oscillator 10. Working voltage: 2.3V-3.6V 11. Working current: About 160mA 12. Working temperature range: -40 degree C ~ +85 degree C 13. Size: 69.13 x 28.41 x 8.45mm 14. Mic: MSM261S4030H0 15. SD card: Integrated external SD card slot Power management Chip IP5306 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery(not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM: 520 kB SRAM + 8MBytes External SPRAM 4. KEY: Reset 5. Dispaly: IPS Panel ST7789/1.3 Inch 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. On-board clock: 40MHz crystal oscillator 10. Working voltage: 2.3V-3.6V 11. Working current: About 160mA 12. Working temperature range: -40 degree C ~ +85 degree C 13. Size: 69.13 x 28.41 x 8.45mm 14. Mic: MSM261S4030H0 15. SD card: Integrated external SD card slot Power management Chip IP5306 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery(not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM:520 kB SRAM 4. KEY: Reset???IO32 5. Dispaly: 0.91 SSD1306 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. Steering engine: Analog servo 10. On-board clock: 40MHz crystal oscillator 11. Working voltage: 2.3V-3.6V 12. Working current: About 160mA 13. Working temperature range: -40 degree C ~ +85 degree C 14. Size: 64.57mm x 23.98mm Power Supply Specifications 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery (not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC(esp32 chip) 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

Hardware Specifications 1. Chipset: ESPRESSIF-ESP32-PCIO-D4 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor 2. FLASH: QSPI flash/SRAM, up to 4 x 16 MB 3. SRAM:520 kB SRAM 4. KEY: Reset IO32 5. Display: 0.91 SSD1306 6. Power indicator lamp: Red 7. USB to TTL: CP2104 8. Camera: OV2640 2.0 Megapixel 9. Steering engine: Analog servo 10. On-board clock: 40MHz crystal oscillator 11. Working voltage: 2.3V-3.6V 12. Working current: About 160mA 13. Working temperature range: -40 degree C ~ +85 degree C 14. Size: 64.57mm x 23.98mm Power Supply Specifications 1. Power Supply: USB 5V/1A 2. Charging current: 1A 3. Battery: 3.7V lithium battery (not included) WiFi 1. Standard: FCC/CE/TELEC/KCC/SRRC/NCC(esp32 chip) 2. Protocol: 802.11 b/g/n/e/i (802.11n, speed up to150Mbps) A-MPDU and A-MSDU polymerization, support 0.4uS Protection interval 3. Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth 1. Protocol: Meet bluetooth v4.2BR/EDR and BLE standard 2. Radio frequency: With -98dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH 3. Audio frequency: CVSD&SBC audio frequency Software specification 1. WiFi Mode: Station/SoftAP/SoftAP+Station/P2P 2. Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type: AES/RSA/ECC/SHA 4. Firmware upgrade: UART download/OTA (Through network/host to download and write firmware) 5. Software Development: Support cloud server development / SDK for user firmware development 6. Networking protocol: IPv4, IPv6, SSL, TCP, UDP, HTTP, FTP, MQTT 7. User Configuration: AT + Instruction set, cloud server, android/iOS app 8. OS: FreeRT OS

Read more less

FeaturesEspressif official ESP32-WROOM-32 module 1. ESP32 version: REV1 2. FLASH: 4MB 3. Lithium battery interface, 500mA charging current 4. Compatible with Arduino, MicroPython 5. Default firmware: new MicroPythoSpecification1. Microcontroller: ESP-32 2. Board power: (USB) 5V 3. Support battery: Lipo Battery 3.7V (not included) 4. Working voltage: 3.3V 5. Flash memory: 4 M bytes 6. Dimensions: 78 x 27 mm 7. Weight: 7.8g

Read more less

FeaturesEspressif official ESP32-WROVER-B module 1. ESP32 version: REV1 2. FLASH: 4MB 3. Lithium battery interface, 500mA charging current 4. Compatible with Arduino, MicroPython 5. Default firmware: new MicroPythoSpecification1. Microcontroller: ESP-32 2. Board power: (USB) 5V 3. Support battery: Lipo Battery 3.7V (not included) 4. Working voltage: 3.3V 5. Flash memory: 4 M bytes 6. Dimensions: 78 x 27 mm 7. Weight: 7.8g

Read more less

1. Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol 2. Integration of the data link layer, physical layer 3. Support the wakeup 4. Support high speed serial peripheral interface (SPI model 0, 3) 5. Internal 32K bytes receive buffer 6. The embedded 10BaseT/100BaseTX Ethernet physical layer (PHY) 7. Support auto negotiation (10/100-Based full duplex or half duplex) 8. The working voltage of 3.3V, I/O and 5V voltage signal 9. Pin type package ultra small, convenient for embedded applications

Read more less

Product demonstration (Note: OLED is not soldered to T-beam) Features: 1. ESP 32 version: Rev1 2. WiFi 3. Bluetooth 4. 4MB pSRAM 5. 4MB flash memory 6. Three-dimensional antenna product description: 1. Working voltage: 1.8~3.7V 2. Acceptable current: 10~14 mA 3. Transmitting current: 120 mA@+20 dBm 4. 90 mA@+17 dBm 5. 29 mA@+13 dBm 6. Working frequency: 433/470 MHz (433 HMz version) SX1278 /868m/915 m (868 MHz version) SX1276 7. Transmitting power: +20 dBm 8. Receiving sensitivity: -139 dBm@Lora&62.5Khz&SF=12&146 bps -136 dBm@Lora&125 Khz&SF=12&293 bps -118 dBm@Lora&125 Khz&SF=6&9380 bps -123 dBm@FSK&5 Khz&1.2Kbps 9. Frequency error: +/-15 kHz 10. FIFO space: 64 bytes 11. Data rate: 1.2k~300 Kbps@FSK 0.018K~37.5Kbps@Lora 12. Modulation method: FSK, GFSK, MSK, GMSK, Lora TM, OOK 13. Interface form: SPI 14. Sleep current: 0.2uA 15. 1.5uA@Idle 16. Working temperature: -40 degrees Celsius-+85 degrees Celsius 17. Digital RSSI function 18. Automatic frequency correction 19. Automatic gain control 20. Low pressure detection 21. Fast wake-up and frequency hopping 22. Highly configurable packet handler Global Positioning System: 1. GPS module neo-6m, 3V-5V power supply universal 2. The predetermined module with ceramic antenna, super signal 3. Save configuration parameter data EEPROM 4. With data backup battery 5. With LED signal indicator 6. The default baud rate: 9600 power: 1. TP 5400 2. 1A battery management 3. LED indicator: there are 4 LEDs to display the battery status in real time 4. USB 5. CP 2104-GMR 6. Pre-Flash firmware OLED description: 1. Size: 0.96 inches 2. High resolution: 128x64 3. Color: white 4. Viewing angle: >160 degrees 5.Driver IC: SSD 1306 6. Working temperature: -30~80 degrees Celsius 7. Module size (generous): 27.0mm x 27.0mm x 4.1mm 8. Support a variety of control chips: fully compatible with Arduino, 51 series, MSP 430 series, STM 32/2, CSR chips, etc. (a lot of examples are available for reference) 9. Wide voltage support: directly support 3.3V~5V DC power supply without any modification 10. Ultra-low power consumption: 0.04W in normal operation 11. IO port occupies the smallest display: IIC communication, as long as two IO ports

Read more less

Product Description Hardware Specifications: 1. Main chip: ESP32 2. Module: ESP32-WROVER-B,868 MHz Shield 3. Interface:USB,SD Card,Solar Input interface 4. Flash Memory: 4M Flash / 8M PSRAM 5. Button: Reset,Power switch 6. USB to TTL: CP2104 7. Car Clock: 40MHz 8. SIM Card Size: Nano SIM Card 9. SIM Antenna 10. GPS Antenna 11. Operating Temperature Range: -40-85 degrees 12. Product Size: 111mm x 37mm x 20mm 13. Product Weight: 50g Power Specifications: 1. Working Voltage: 5V input 2. Solar input voltage range???4.4-6V 3. Working Curent: About 200mA 4. Charging Current: 780mA 5. Battery Model: 18650 6. Battery Holder Model: 18650 battery holder 7. JST Connector: 2pin 2mm 8. USB: TYPE-C 3.0 Wi-Fi: 1. Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC 2. Protocol: 802.11 b/g/n(802.11n???speed up to150Mbps)A-MPDU and A-MSDU polymerization???support 0.4??S Protection interval 3. Frequency: range 2.4GHz~2.5GHz(2400M~2483.5M) 4. Transmit Power: 22dBm 5. Communication distance: 300m Bluetooth: 1. Protocol meet Bluetooth : v4.2BR/EDR and BLE standard 2. Radio Frequency : with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH 3. Audio Frequency : CVSD&SBC audio frequency Software Specification: 1. Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P 2. Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS 3. Encryption Type : AES/RSA/ECC/SHA 4. Firmware Upgrade :UART download/OTA???Through network/host to download and write firmware??? 5. Software Development : Support cloud server development /SDK for user firmware development 6. Networking Protocol : IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT 7. User Configuration : AT + Instruction set, cloud server, Android/iOS APP 8. OS : FreeRTOS Version update function: 1. The battery positive and negative poles are connected to the wrong protection, overcharge and over discharge protection 2. GPS power control, reduce power consumption, the lowest reaches 300uA when sleeping 3. Replacement of ordinary charging IC with solar charging IC

Read more less