Consumer Electronics

1. Power Supply: NFC wireless power transfer 2. Gray Scale Levels: 2 3. Display Colors: Red, Yellow, Black, White 4. Refresh Time: 16 seconds (excluding data transmission time) 5. Dot Pitch: 0.135 x 0.135 (mm) 6. Viewing Angle: Greater than 170 degrees7. Resolution: 296 x 128 pixels 8. Display Size: Approx. 66.89 x 29.05 mm9. Dimensions: Approx. 8.75 x 4.77 x 1.27 cmFeatures:1. Uses a passive NFC solution with no built-in battery, eliminating the need for complicated wiring2. When the display needs to be refreshed, simply bring an NFC-enabled smartphone or card reader close to the e-ink screen to wirelessly power it and update the display content3. Suitable for retail price tags, asset and equipment tags, electronic shelf labels, and conference name tags, among others4. Eco-friendly and energy-efficient; easy to operate via an Android app5. ABS housing; sleek, lightweight, and aesthetically pleasingSpecification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 7cm * 3cm / 4.72inch * 2.76inch * 1.18inch Qty per Carton 100 Carton Weight 8.50kgs / 18.74lb Carton Size 37cm * 25cm * 28cm / 14.57inch * 9.84inch * 11.02inch Loading Container 20GP: 1029 cartons * 100 pcs = 102900 pcs 40HQ: 2390 cartons * 100 pcs = 239000 pcs

Read more less

1. High quality PVC coating, with excellent conductivity and superior craftsmanship2. Easy to plug the interface and easy to identify3. 4-pin HX-2.54 DuPont wire4. Length of the wire: about 22cm5. Size: about 7.2 x 3.2 x 0.8cm6. Weight: about 9.3gSpecification: Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 9cm * 5cm * 4cm / 3.54inch * 1.97inch * 1.57inch Qty per Carton 288 Carton Weight 7.00kgs / 15.43lb Carton Size 47cm * 38cm * 34cm / 18.5inch * 14.96inch * 13.39inch Loading Container 20GP: 439 cartons * 288 pcs = 126432 pcs 40HQ: 1019 cartons * 288 pcs = 293472 pcs

Read more less

1. Input voltage: 4 - 35V (Note: for constant current input, the minimum required is 7V or above)2. Output voltage: 1.25 - 25V adjustable continuously, default shipping voltage is 4.2A with a current of 1A3. Output current: 12V to 5V, 2A (Constant current range: 0.2A - 2A adjustable)4. Transistor current: fixed at 1/10 of the set constant current value5. Output power: natural cooling 10W, 15W requires a heat sink installation6. Conversion efficiency: 80% (The higher the output voltage, the higher the efficiency)7. Operating temperature: industrial grade -40°C to +85°C (If the ambient temperature exceeds 40°C, reduce the power usage or enhance the heat dissipation)8. Full-load temperature rise: 45°C9. Indicator lights: constant current indicator light is red, charging in progress indicator light is red, charging complete indicator light is green10. Output short-circuit protection: es, for constant current (current set at the current value)11. Wiring method: can be directly wired and soldered onto the PCB12. Adjustment method: first, connect the input power correctly (between 4 - 35V), then use a multimeter to monitor the output voltage and adjust the potentiometer (generally, rotate clockwise to increase voltage, counterclockwise to decrease voltage)13. Size: about 5 x 3.7 x 1.3 cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 7cm * 5cm * 4cm / 2.76inch * 1.97inch * 1.57inch Qty per Carton 324 Carton Weight 15.00kgs / 33.07lb Carton Size 47cm * 38cm * 30cm / 18.5inch * 14.96inch * 11.81inch Loading Container 20GP: 497 cartons * 324 pcs = 161028 pcs 40HQ: 1155 cartons * 324 pcs = 374220 pcs

Read more less

1. 6.25-inch DSI touchscreen supporting 5-point capacitive touch.2. IPS display panel with a hardware resolution of 720 × 1560.3. Default portrait orientation; display orientation can be switched via system display settings.4. Features full lamination technology and a 6H-hardness tempered glass touch panel.5. DSI display interface and I2C touch interface.6. Compatible with Raspberry Pi; supports driver-free operation on the latest Raspberry Pi OS.7. Backlight brightness can be adjusted via software or onboard buttons.Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 19cm * 10cm * 5cm / 7.48inch * 3.94inch * 1.97inch Qty per Carton 64 Carton Weight 16.00kgs / 35.27lb Carton Size 38cm * 42cm * 34cm / 14.96inch * 16.54inch * 13.39inch Loading Container 20GP: 491 cartons * 64 pcs = 31424 pcs 40HQ: 1140 cartons * 64 pcs = 72960 pcs

Read more less

1. 412 × 412 resolution, 16.7M colors, capable of clearly displaying color images2. High-transmittance touchscreen with fast response and long service life3. Built-in SPD2010 display and touch controller chip; uses QSPI and I2C interfaces for communication, minimizing pin usage; compatible with mainboards such as Raspberry Pi, Pico, ESP32 S3, Arduino, and STM324. Driver chip: SPD20105. Operating voltage: 3.3V / 5V6. Display panel: IPS7. Touch type: Capacitive8. Display size: 36.96 × 36.96 mm9. Brightness: 450 cd/m210. Product dimensions: 44.77 × 44.77 mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 96 Carton Weight 6.90kgs / 15.21lb Carton Size 32cm * 34cm * 42cm / 12.6inch * 13.39inch * 16.54inch Loading Container 20GP: 583 cartons * 96 pcs = 55968 pcs 40HQ: 1354 cartons * 96 pcs = 129984 pcs

Read more less

1. 11-inch IPS display with 1920 × 1200 hardware resolution.2. Capacitive touch, supporting 10-point touch.3. Features a 7H hardness tempered glass panel.4. Utilizes In-Cell touch panel technology and full lamination.5. Supports Raspberry Pi OS, Ubuntu, Kali, and RetroPie when used with Raspberry Pi.6. Supports Windows 11, 10, 8.1, 8, and 7 when used as a computer monitor.7. Supports brightness adjustment and screen rotation via physical buttons.8. Supports HDMI-compatible audio output; includes a 3.5mm headphone jack and a 4-pin speaker connector.Specifications:1. Size: 11 inches2. Viewing Angle: 170 degrees3. Resolution: 1920 × 12004. Overall Dimensions: 253.67 (H) × 165.22 (V) × 2.8 (D) mm5. Display Area: 253.87 (H) × 147.42 (V) mm6. Pixel Pitch: 0.1128 (H) × 0.1128 (V) mm7. Color Gamut: 70% NTSC8. Contrast Ratio: 1300:19. Backlight Adjustment: OSD menu dimming10. Refresh Rate: 60Hz11. Display Interface: Standard HDMI-compatible12. Power Interface: 5V power supply13. Default Power Consumption: 4.85WSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 28cm * 20cm * 5cm / 11.02inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 15.10kgs / 33.29lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 20 pcs = 13220 pcs 40HQ: 1535 cartons * 20 pcs = 30700 pcs

Read more less

1. 11-inch IPS display with 1920 × 1200 hardware resolution.2. Capacitive touch, supporting 10-point touch.3. Features a 7H hardness tempered glass panel.4. Utilizes In-Cell touch panel technology and full lamination.5. Supports Raspberry Pi OS, Ubuntu, Kali, and RetroPie when used with Raspberry Pi.6. Supports Windows 11, 10, 8.1, 8, and 7 when used as a computer monitor.7. Supports brightness adjustment and screen rotation via physical buttons.8. Supports HDMI-compatible audio output; includes a 3.5mm headphone jack and a 4-pin speaker connector.Specifications:1. Size: 11 inches2. Viewing Angle: 170 degrees3. Resolution: 1920 × 12004. Overall Dimensions: 253.67 (H) × 165.22 (V) × 2.8 (D) mm5. Display Area: 253.87 (H) × 147.42 (V) mm6. Pixel Pitch: 0.1128 (H) × 0.1128 (V) mm7. Color Gamut: 70% NTSC8. Contrast Ratio: 1300:19. Backlight Adjustment: OSD menu dimming10. Refresh Rate: 60Hz11. Display Interface: Standard HDMI-compatible12. Power Interface: 5V power supply13. Default Power Consumption: 4.85WSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 28cm * 20cm * 5cm / 11.02inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 15.10kgs / 33.29lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 20 pcs = 13220 pcs 40HQ: 1535 cartons * 20 pcs = 30700 pcs

Read more less

1. The PCIe to 2-CH 2.5G ETH HAT+ is an expansion board designed for use with the Raspberry Pi. It features dual onboard 2.5G Ethernet ports and supports driver-free operation on Raspberry Pi OS, making it convenient for users to expand connectivity.2. Ethernet port status indicators: flashing green light, solid yellow light.3. Equipped with the high-performance Realtek RTL8125 (2.5G) controller chip.4. Ethernet port type: 2 x RJ45 2.5G ports.5. PCIe interface: PCIe x1 Gen2.6. Power supply: 5V.7. Network standards: 10/100/1000/2500 Mbps.Package Contents:PCIe to 2-CH 2.5G ETH HAT+ × 116P Cable (40mm) × 12x20 Pin Header (2.54mm pitch) × 1Screw pack × 1Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 12cm * 8cm * 3cm / 4.72inch * 3.15inch * 1.18inch Qty per Carton 160 Carton Weight 13.90kgs / 30.64lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 160 pcs = 78400 pcs 40HQ: 1137 cartons * 160 pcs = 181920 pcs

Read more less

Specifications:1. Resolution: 4 Megapixels2. Image Sensor: OV46893. Interface Type: USB 2.0 Type-C / SH1.0 4-pin connector4. Lens Mount: M125. Operating Voltage: 5V +/-5%6. Operating Temperature: -10 ~ 60 degrees Celsius7. Module Dimensions: 25 × 25 mmCamera:--Sensor Size: 1/3 inch--Aperture (F): 2.7--Focal Length (EFL): 2.88mm--Field of View (FOV): 92-degree--Distortion: Less than -0.2%--Focus Type: Fixed focusImage:1. Supported Formats: MJPG, YUY22. Still Image Resolution: 2688 × 15203. Video Recording Support:MJPG:30 FPS at 2688 × 152030 FPS at 2560 × 144060 FPS at 1920 × 108060 FPS at 1280 × 72060 FPS at 640 × 480YUY2:2 FPS at 2688 × 15202 FPS at 2560 × 14405 FPS at 1920 × 108010 FPS at 1280 × 72030 FPS at 640 × 480Specification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 8cm * 8cm * 5cm / 3.15inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 5.00kgs / 11.02lb Carton Size 37cm * 30cm * 30cm / 14.57inch * 11.81inch * 11.81inch Loading Container 20GP: 800 cartons * 100 pcs = 80000 pcs 40HQ: 1859 cartons * 100 pcs = 185900 pcs

Read more less

1. This product is a microcontroller development board supporting 2.4GHz/5GHz Wi-Fi 6 and Bluetooth 5 (LE). It features stacked 4MB Flash and an onboard 1.47-inch LCD screen, capable of smoothly running GUI applications such as LVGL. With its diverse peripheral interfaces, it enables rapid development of HMI and other applications based on the ESP32-C5. 2. Features both a high-performance and a low-power RISC-V 32-bit processor; the high-performance processor clocks up to 240 MHz, while the low-power processor clocks up to 48 MHz.3. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread 1.4) wireless connectivity with superior RF performance.4. Onboard memory: 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash.5. Onboard 1.47-inch LCD screen with 172 × 320 resolution and 262K colors.6. Onboard USB-C port supporting ESP32-C5 native USB functions (download, debugging, and serial communication); specific functionality depends on firmware configuration.7. Onboard Micro SD card slot for external storage of images or files.8. Supports flexible clock configuration and multiple power management modes, facilitating low-power applications across various scenarios.9. Onboard RGB LED; combined with a transparent acrylic interlayer, it creates cool lighting effects.10. Breaks out most GPIO pins.Specifications:1. Interface: USB Type-C2. Main Chip: ESP32-C5FH43. Flash: 4 MB4. Screen Type: TFT5. Screen Size: 1.47 inches6. Screen Resolution: 172 × 3207. Screen Interface: SPI8. Screen Controller: ST77899. Touch: None10. Onboard Peripherals: Micro SD, WS2812 RGB LED11. Breakout Interface: 18-pin header interfaceSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 7cm * 4cm / 3.94inch * 2.76inch * 1.57inch Qty per Carton 200 Carton Weight 19.10kgs / 42.11lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 200 pcs = 107200 pcs 40HQ: 1244 cartons * 200 pcs = 248800 pcs

Read more less

1. Screen Size: 21.5 inch2. Resolution: 1920 x 1080 3. Display Ports: Mini HDMI / Type-C 4. Panel: IPS Tempered Glass Panel5. Viewing Angle: 178 degrees6. Housing: ABS 7. Other Features: Mobile screen mirroring, HDR display technology, built-in high-fidelity speakers, capacitive touchscreen, 10-point touch, 3.5mm headphone jack 8. Dimensions: Approx. 49.5 x 28.7 x 2.2 cmFeatures:1. Full-function Type-C port supports audio and video transmission; plug-and-play for instant smartphone screen mirroring2. Computer split-screen mode enables collaborative processing; dual-screen operation boosts work efficiency3. IPS display panel delivers outstanding performance, rich colors, and wide viewing angles4. HDR true-color picture quality ensures natural color transitions and captures every detail5. 144Hz high refresh rate screen6. Supports 10-point touch; actual number of touch points depends on the software system7. Tempered glass panel with a hardness of 6H8. Full-lamination screen for high clarity and dust resistance9. Dual-channel speakers with black magnet high-fidelity drivers for louder volume, wider frequency range, and superior sound quality10. 140-degree adjustable metal stand, sturdy and durable; paired with non-slip rubber pads at the bottom of the screen for stable useSpecification: Package Weight One Package Weight 3.50kgs / 7.72lb One Package Size 55cm * 35cm * 9cm / 21.65inch * 13.78inch * 3.54inch Qty per Carton 5 Carton Weight 18.50kgs / 40.79lb Carton Size 57cm * 45cm * 37cm / 22.44inch * 17.72inch * 14.57inch Loading Container 20GP: 280 cartons * 5 pcs = 1400 pcs 40HQ: 652 cartons * 5 pcs = 3260 pcs

Read more less

1. This product is a microcontroller development board supporting 2.4GHz/5GHz Wi-Fi 6 and Bluetooth 5 (LE). It features stacked 4MB Flash and an onboard 1.47-inch LCD screen, capable of smoothly running GUI applications such as LVGL. With its diverse peripheral interfaces, it enables rapid development of HMI and other applications based on the ESP32-C5. 2. Features both a high-performance and a low-power RISC-V 32-bit processor; the high-performance processor clocks up to 240 MHz, while the low-power processor clocks up to 48 MHz.3. Integrates Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread 1.4) wireless connectivity with superior RF performance.4. Onboard memory: 320 KB ROM, 384 KB HP SRAM, 16 KB LP SRAM, and 4 MB Flash.5. Onboard 1.47-inch LCD screen with 172 × 320 resolution and 262K colors.6. Onboard USB-C port supporting ESP32-C5 native USB functions (download, debugging, and serial communication); specific functionality depends on firmware configuration.7. Onboard Micro SD card slot for external storage of images or files.8. Supports flexible clock configuration and multiple power management modes, facilitating low-power applications across various scenarios.9. Onboard RGB LED; combined with a transparent acrylic interlayer, it creates cool lighting effects.10. Breaks out most GPIO pins.Specifications:1. Interface: USB Type-C2. Main Chip: ESP32-C5FH43. Flash: 4 MB4. Screen Type: TFT5. Screen Size: 1.47 inches6. Screen Resolution: 172 × 3207. Screen Interface: SPI8. Screen Controller: ST77899. Touch: None10. Onboard Peripherals: Micro SD, WS2812 RGB LED11. Breakout Interface: 18-pin header interfaceSpecification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 7cm * 4cm / 3.94inch * 2.76inch * 1.57inch Qty per Carton 200 Carton Weight 19.10kgs / 42.11lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 200 pcs = 107200 pcs 40HQ: 1244 cartons * 200 pcs = 248800 pcs

Read more less

1. 11-inch IPS display with 1920 × 1200 hardware resolution.2. Capacitive touch, supporting 10-point touch.3. Features a 7H hardness tempered glass panel.4. Utilizes In-Cell touch panel technology and full lamination.5. Supports Raspberry Pi OS, Ubuntu, Kali, and RetroPie when used with Raspberry Pi.6. Supports Windows 11, 10, 8.1, 8, and 7 when used as a computer monitor.7. Supports brightness adjustment and screen rotation via physical buttons.8. Supports HDMI-compatible audio output; includes a 3.5mm headphone jack and a 4-pin speaker connector.Specifications:1. Size: 11 inches2. Viewing Angle: 170 degrees3. Resolution: 1920 × 12004. Overall Dimensions: 253.67 (H) × 165.22 (V) × 2.8 (D) mm5. Display Area: 253.87 (H) × 147.42 (V) mm6. Pixel Pitch: 0.1128 (H) × 0.1128 (V) mm7. Color Gamut: 70% NTSC8. Contrast Ratio: 1300:19. Backlight Adjustment: OSD menu dimming10. Refresh Rate: 60Hz11. Display Interface: Standard HDMI-compatible12. Power Interface: 5V power supply13. Default Power Consumption: 4.85WSpecification: Package Weight One Package Weight 0.70kgs / 1.55lb One Package Size 28cm * 20cm * 5cm / 11.02inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 15.10kgs / 33.29lb Carton Size 30cm * 42cm * 32cm / 11.81inch * 16.54inch * 12.6inch Loading Container 20GP: 661 cartons * 20 pcs = 13220 pcs 40HQ: 1535 cartons * 20 pcs = 30700 pcs

Read more less

1. Screen Size: 21.5 inch2. Resolution: 1920 x 1080 3. Display Ports: Mini HDMI / Type-C 4. Panel: IPS Tempered Glass Panel5. Viewing Angle: 178 degrees6. Housing: ABS 7. Other Features: Mobile screen mirroring, HDR display technology, built-in high-fidelity speakers, capacitive touchscreen, 10-point touch, 3.5mm headphone jack 8. Dimensions: Approx. 49.5 x 28.7 x 2.2 cmFeatures:1. Full-function Type-C port supports audio and video transmission; plug-and-play for instant smartphone screen mirroring2. Computer split-screen mode enables collaborative processing; dual-screen operation boosts work efficiency3. IPS display panel delivers outstanding performance, rich colors, and wide viewing angles4. HDR true-color picture quality ensures natural color transitions and captures every detail5. 144Hz high refresh rate screen6. Supports 10-point touch; actual number of touch points depends on the software system7. Tempered glass panel with a hardness of 6H8. Full-lamination screen for high clarity and dust resistance9. Dual-channel speakers with black magnet high-fidelity drivers for louder volume, wider frequency range, and superior sound quality10. 140-degree adjustable metal stand, sturdy and durable; paired with non-slip rubber pads at the bottom of the screen for stable useSpecification: Package Weight One Package Weight 3.50kgs / 7.72lb One Package Size 55cm * 35cm * 9cm / 21.65inch * 13.78inch * 3.54inch Qty per Carton 5 Carton Weight 18.50kgs / 40.79lb Carton Size 57cm * 45cm * 37cm / 22.44inch * 17.72inch * 14.57inch Loading Container 20GP: 280 cartons * 5 pcs = 1400 pcs 40HQ: 652 cartons * 5 pcs = 3260 pcs

Read more less

1. Screen Size: 21.5 inch2. Resolution: 1920 x 1080 3. Display Ports: Mini HDMI / Type-C 4. Panel: IPS Tempered Glass Panel5. Viewing Angle: 178 degrees6. Housing: ABS 7. Other Features: Mobile screen mirroring, HDR display technology, built-in high-fidelity speakers, capacitive touchscreen, 10-point touch, 3.5mm headphone jack 8. Dimensions: Approx. 49.5 x 28.7 x 2.2 cmFeatures:1. Full-function Type-C port supports audio and video transmission; plug-and-play for instant smartphone screen mirroring2. Computer split-screen mode enables collaborative processing; dual-screen operation boosts work efficiency3. IPS display panel delivers outstanding performance, rich colors, and wide viewing angles4. HDR true-color picture quality ensures natural color transitions and captures every detail5. 144Hz high refresh rate screen6. Supports 10-point touch; actual number of touch points depends on the software system7. Tempered glass panel with a hardness of 6H8. Full-lamination screen for high clarity and dust resistance9. Dual-channel speakers with black magnet high-fidelity drivers for louder volume, wider frequency range, and superior sound quality10. 140-degree adjustable metal stand, sturdy and durable; paired with non-slip rubber pads at the bottom of the screen for stable useSpecification: Package Weight One Package Weight 3.50kgs / 7.72lb One Package Size 55cm * 35cm * 9cm / 21.65inch * 13.78inch * 3.54inch Qty per Carton 5 Carton Weight 18.50kgs / 40.79lb Carton Size 57cm * 45cm * 37cm / 22.44inch * 17.72inch * 14.57inch Loading Container 20GP: 280 cartons * 5 pcs = 1400 pcs 40HQ: 652 cartons * 5 pcs = 3260 pcs

Read more less

1. Screen Size: 13.3 inch2. Resolution: 1920 x 10803. Display Interface: DSI4. Display Panel: IPS panel5. Viewing Angle: 178 degrees6. Touch Type: Capacitive touch7. Number of Touch Points: 10-point touch8. Touch Interface: 12C9. Touch Panel: Tempered glass panel10. Backplate: All-metal backplate (for models with backplate)11. Device and System Support: Supports Raspberry Pi OS; compatible with Raspberry Pi 3A+/3B+/4B/5, CM3/3+/4/5 Raspberry12. Dimensions: Approx. 32.5 x 20.3 cmFeatures:1. 1920 x 1080 high resolution, providing clear images and vivid color display2. IPS display panel with exceptional performance and a wide viewing angle of up to 178 degrees3. Supports 10-point touch; the actual number of touch points depends on the software system4. Tempered glass panel with a hardness of 6H5. Backlight brightness is adjustable via software6. Supports automatic display and hiding of the virtual keyboardSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 37cm * 25cm * 6cm / 14.57inch * 9.84inch * 2.36inch Qty per Carton 10 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 39cm * 32cm / 20.47inch * 15.35inch * 12.6inch Loading Container 20GP: 410 cartons * 10 pcs = 4100 pcs 40HQ: 953 cartons * 10 pcs = 9530 pcs

Read more less

1. Screen Size: 13.3 inch2. Resolution: 1920 x 10803. Display Interface: DSI4. Display Panel: IPS panel5. Viewing Angle: 178 degrees6. Touch Type: Capacitive touch7. Number of Touch Points: 10-point touch8. Touch Interface: 12C9. Touch Panel: Tempered glass panel10. Backplate: All-metal backplate (for models with backplate)11. Device and System Support: Supports Raspberry Pi OS; compatible with Raspberry Pi 3A+/3B+/4B/5, CM3/3+/4/5 Raspberry12. Dimensions: Approx. 32.5 x 20.3 cmFeatures:1. 1920 x 1080 high resolution, providing clear images and vivid color display2. IPS display panel with exceptional performance and a wide viewing angle of up to 178 degrees3. Supports 10-point touch; the actual number of touch points depends on the software system4. Tempered glass panel with a hardness of 6H5. Backlight brightness is adjustable via software6. Supports automatic display and hiding of the virtual keyboardSpecification: Package Weight One Package Weight 1.20kgs / 2.65lb One Package Size 37cm * 25cm * 6cm / 14.57inch * 9.84inch * 2.36inch Qty per Carton 10 Carton Weight 13.00kgs / 28.66lb Carton Size 52cm * 39cm * 32cm / 20.47inch * 15.35inch * 12.6inch Loading Container 20GP: 410 cartons * 10 pcs = 4100 pcs 40HQ: 953 cartons * 10 pcs = 9530 pcs

Read more less

1. The CAN FD to RS232/RS485 converter is a DIN-rail mountable device designed for bidirectional data conversion between CAN FD and RS232/RS485 interfaces. It features high speed, low latency, stable performance, ease of use, and cost-effectiveness. It supports five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—enabling interconnection between CAN and serial devices, while remaining compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide input voltage range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host software and features a built-in 120Ω bus resistor (selectable via DIP switch). Designed for DIN-rail mounting, it offers convenient configuration and efficient installation. Basic Parameters:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting Method: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Parameters:1. CAN Port Specifications: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Port Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistors: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Serial Port Specifications: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: CAN FD to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Conversion Direction: Supports bidirectional conversion, serial-to-CAN only, and CAN-to-serial only8. Firmware Upgrade: Supports firmware upgrades via host PC software9. Parameter Configuration: AT commands or host PC software configurationProtection Parameters:1. ESD Protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical Fast Transient (EFT): Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV3. Surge immunity test: Power supply circuit—differential mode 1 kV, common mode 2 kV; CAN circuit—common mode 2 kV.Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs 40HQ: 1316 cartons * 54 pcs = 71064 pcs

Read more less

1. The CAN FD ETH RS232/RS485 Converter is a DIN-rail mountable device designed for bidirectional conversion between CAN FD and Ethernet/RS485/RS232 interfaces. It features high speed, low latency, stable performance, ease of use, and excellent cost-effectiveness. Supporting five data conversion modes—Transparent, Transparent with ID, Standard Protocol, Modbus, and Custom Frame Header/Footer—it enables interconnection between CAN networks and Ethernet or serial devices and is compatible with CAN FD and CAN 2.0A/2.0B protocols.2. Built with an industrial-grade design, the device operates reliably within a temperature range of -40C to 85C and supports a wide power input range of 9V to 36V. It accommodates baud rates of 5 Kbps to 1 Mbps for the arbitration field and 100 Kbps to 5 Mbps for the data field.3. The device supports configuration via host-side software and features a built-in 120Ω bus resistor (selectable via DIP switch) and DIN-rail mounting capability, ensuring convenient and efficient setup and installation. Basic Specifications:1. Operating Voltage: DC 9V–36V2. Dimensions: 110 × 27 × 85.6 mm3. Mounting: DIN-rail mounting4. Reload Button: Long press to restore factory settings5. Indicators: POWER, WORK, COM, and CANInterface Specifications:1. CAN Port: 1 CAN port; supports CAN FD; compatible with CAN 2.0A/2.0B2. CAN Baud Rate: Arbitration phase: 5 Kbps–1 Mbps; Data phase: 100 Kbps–5 Mbps3. Termination Resistor: Two built-in 120Ω resistors; setting either DIP switch to ON connects one 120Ω resistor in parallel; setting both to ON connects two 120Ω resistors in parallel4. Ethernet Port: RJ45, 10/100 Mbps, auto-MDI/MDIX5. Serial Port: Supports one RS485 or RS232 connectionSoftware Functions:1. Modbus Gateway: Ethernet: CAN (FD) to Modbus TCP (Master/Slave); Serial: CAN (FD) to Modbus RTU (Master/Slave)2. Transmit Messages: Supports configuration of up to 64 transmit messages3. Receive Messages: Supports configuration of up to 64 receive messages4. Conversion Modes: Transparent conversion, transparent conversion with ID, standard conversion, Modbus conversion, and custom frame header/footer conversion5. CAN ID: Supports standard frames and extended frames6. Frame ID Filtering: Supports standard frames only, extended frames only, and custom input frame IDs (up to 32 groups)7. Packetization (Frame Count/Time): Supports custom frame count and custom time interval for packetization (Ethernet port)8. Conversion Direction: Supports bidirectional conversion, Serial/Ethernet to CAN only, or CAN to Serial/Ethernet only9. Firmware Upgrade: Supports firmware upgrades via host software10. Parameter Configuration: AT commands Configuration via commands and host-side software11. Other functions: Supports heartbeat packets and registration packets; operating modes include normal, loopback, and listen-only (for the Ethernet port)Protection parameters:1. Electrostatic discharge (ESD) protection: Air discharge 8 kV, contact discharge 6 kV2. Electrical fast transient (EFT) immunity: Power circuit 2 kV; RS485/RS232 circuit 1 kV; CAN circuit 1 kV; Ethernet port circuit 1 kV3. Surge immunity test: Power circuit (differential mode 1 kV, common mode 2 kV); CAN circuit (common mode 2 kV); serial port circuit (common mode 2 kV); Ethernet port circuit (common mode 2 kV)Specification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 14cm * 12cm * 5cm / 5.51inch * 4.72inch * 1.97inch Qty per Carton 54 Carton Weight 9.20kgs / 20.28lb Carton Size 42cm * 32cm * 35cm / 16.54inch * 12.6inch * 13.78inch Loading Container 20GP: 566 cartons * 54 pcs = 30564 pcs 40HQ: 1316 cartons * 54 pcs = 71064 pcs

Read more less

1. RS485 is a serial communication link layer protocol based on differential signaling. It resolves the short transmission distance (15m) limitation of the RS-232 protocol and is a widely used link layer protocol for longer-distance data communication in industrial applications. Since it uses a twisted pair to transmit differential signals and operates in half-duplex mode, it requires switching between receive and transmit states.2. 5V power supply, supports multiple communication bus interfaces.3. Typical applications: RS485 communication based on 5V systems.4. Main resources: SP485 / MAX485, control interfaces, communication bus interfaces.5. Highly suitable for Modbus protocol devices, smart home automation, remote sensor networks, and industrial PLC control systems.Specification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 200 Carton Weight 13.10kgs / 28.88lb Carton Size 40cm * 30cm * 28cm / 15.75inch * 11.81inch * 11.02inch Loading Container 20GP: 793 cartons * 200 pcs = 158600 pcs 40HQ: 1842 cartons * 200 pcs = 368400 pcs

Read more less

1. This product is an industrial 32-channel relay module controlled via an RS485 interface. It utilizes the Modbus RTU protocol and features built-in protection circuits—including power isolation, magnetic coupling isolation, resettable fuses, and TVS—housed in an ABS DIN-rail mount enclosure. Easy to operate, the module offers high-speed, stable, reliable, and secure communication, making it suitable for a wide range of industrial control equipment and applications with demanding communication requirements. 2. Supports configurable device addresses (1–255) for cascading multiple devices via the RS485 bus; features "flash-on" and "flash-off" functions, allowing the relay to be controlled via commands to turn on or off automatically after a set duration.3. Onboard voltage regulator chip supports a wide input voltage range of 7–36V.4. Onboard integrated power isolation provides stable isolated voltage; the isolated side requires no external power supply.5. Onboard integrated magnetic coupling isolation ensures signal isolation with high reliability, strong anti-interference capabilities, and low power consumption.6. Onboard resettable fuse and TVS (Transient Voltage Suppressor) effectively suppress surge voltages and transient voltage spikes, providing protection against overcurrent, overvoltage, lightning, and ESD.7. Onboard optocoupler isolation prevents interference from the relays high-voltage circuits.8. Uses a dedicated relay driver chip with built-in flyback diode protection for stronger, more stable driving performance.9. Onboard reverse-polarity protection circuit prevents circuit damage caused by incorrect positive/negative terminal connections.10. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.11. Rail-mount ABS protective enclosure ensures convenient installation and enhanced safety.12. Three external LED indicators allow for easy monitoring of MCU status and signal transmission/reception status.Specifications:1. Operating voltage: 7–36V2. Communication interface: RS4853. Communication baud rate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 2560004. Default communication format: 9600, N, 8, 15. Number of relay channels: 326. Contact type: One Normally Open (NO), One Normally Closed (NC)7. Contact load: ≤10A 250V AC or ≤10A 30V DC8. Modbus protocol: Standard Modbus RTU Protocol9. RS485 Address Setting: 1–25510. Indicator LightsSTA: MCU indicator; flashes when the MCU is operating normallyTXD: Transmit indicator; lights up when transmitting dataRXD: Receive indicator; lights up when receiving dataSpecification: Package Weight One Package Weight 0.77kgs / 1.71lb One Package Size 32cm * 13cm * 8cm / 12.6inch * 5.12inch * 3.15inch Qty per Carton 15 Carton Weight 12.70kgs / 28.00lb Carton Size 34cm * 38cm * 42cm / 13.39inch * 14.96inch * 16.54inch Loading Container 20GP: 491 cartons * 15 pcs = 7365 pcs 40HQ: 1140 cartons * 15 pcs = 17100 pcs

Read more less

1. TFmini-i is a single-point ranging LiDAR upgraded from the TFmini-S. It features optimized enhancements in communication interfaces and input voltage to meet the demands of various industrial scenarios. Based on the ToF (Time of Flight) principle, the product delivers stable, precise, and highly sensitive measurement performance.2. Working Principle: TFmini-i operates on the ToF (Time of Flight) principle. Specifically, the device periodically emits near-infrared modulated light waves, which reflect back upon hitting an object. The device calculates the relative distance between itself and the target by measuring the phase difference of the round-trip modulated waves to determine the time of flight.3. Supports wide voltage input and RS-485 interface.4. Application Scenarios: Pedestrian detection / Vehicle detection / Altimeter / Robotics. SpecificationsPerformance Parameters1. Ranging Range:--0.1m to 12m at 90% reflectivity (Indoor 0Klux)--0.1m to 7m at 10% reflectivity (Indoor 0Klux)--0.1m to 12m at 90% reflectivity (Outdoor 70Klux)--0.1m to 7m at 10% reflectivity (Outdoor 70Klux)2. Accuracy:--plus or minus 6cm (0.1m to 6m)--plus or minus 1% (6m to 12m)3. Distance Resolution: 1cm4. Frame Rate: 1 to 40Hz5. Ambient Light Immunity: 70Klux6. Operating Temperature: minus 20 to 60 degrees Celsius7. Enclosure Rating: IP65Optical parameters:1. Light source: VCSEL2. Center wavelength: 850nm3. Eye safety: Class 1 (IEC60825)4. Field of View (FOV): 2 degreesElectrical parameters：1. Supply voltage: DC 7V–30V2. Average current: less than or equal to 65mA at 12V3. Power consumption: less than 0.8W at 12V4. Peak current: 100mA at 12V5. Communication interface: RS485Other:1. Dimensions: 50mm x 34mm x 41mm (L x W x H)2. Housing material: ABS/PC/PMMA3. Storage temperature: minus 30 to 75 degrees Celsius4. Weight: 52g (including cable)5. Cable length: 70cmSpecification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 20.10kgs / 44.31lb Carton Size 42cm * 30cm * 35cm / 16.54inch * 11.81inch * 13.78inch Loading Container 20GP: 604 cartons * 100 pcs = 60400 pcs 40HQ: 1403 cartons * 100 pcs = 140300 pcs

Read more less

1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz2. Integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication with excellent RF performance3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors5. Includes an onboard RTC chip to support scheduled tasks6. Equipped with an onboard USB Type-C port for power supply, firmware downloading, and debugging7. Includes an onboard terminal block for power input (supports 5V power supply only)8. Features onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip9. Includes onboard digital isolation to prevent external signals from interfering with the control chip10. Features onboard integrated power isolation to provide stable isolated voltage; no additional power supply is required for the isolated side11. Includes onboard RS485 transceiver indicators for easy monitoring of device operating status12. Comes with a DIN-rail mountable protective enclosure for convenient installation and enhanced safetySpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs 40HQ: 1289 cartons * 100 pcs = 128900 pcs

Read more less

1. Based on the ESP32-S3 microcontroller, featuring an Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240MHz.2. Integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, offering superior RF performance.3. Uses a high-quality relay supporting loads up to 10A at 250V AC or 10A at 30V DC.4. Features an onboard isolated RS485 interface for easy connection to various RS485 Modbus industrial expansion modules or sensors.5. Includes an onboard Pico-compatible interface, supporting select Raspberry Pi Pico expansion boards to add functions such as RTC, CAN, RS232, LoRa, and sensors.6. Equipped with an onboard USB Type-C port for power supply and debugging, facilitating development.7. Features a terminal block power input supporting a wide voltage range (7–36V), suitable for industrial power applications.8. Incorporates onboard optocoupler isolation to prevent external high-voltage relay circuits from interfering with the control chip.9. Includes onboard digital isolation to protect the control chip from external signal interference.10. Features onboard integrated power isolation, providing stable isolated voltage without requiring an external power supply for the isolated side.11. Includes an onboard buzzer, RGB LED, and status indicators for power and RS485 TX/RX, allowing for easy monitoring of the devices operating status.12. Housed in a DIN-rail mountable ABS protective case for safe and convenient installation and use.Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 48 Carton Weight 16.50kgs / 36.38lb Carton Size 36cm * 42cm * 32cm / 14.17inch * 16.54inch * 12.6inch Loading Container 20GP: 551 cartons * 48 pcs = 26448 pcs 40HQ: 1279 cartons * 48 pcs = 61392 pcs

Read more less

1. Uses the SP3485 chip controlled via UART; supports automatic transmit/receive switching for RS485 half-duplex communication.2. Uses the MCP2515 + SN65HVD230 combination controlled via SPI; enables CAN half-duplex communication.3. Features onboard integrated power isolation, providing stable isolated voltage without the need for an external power supply on the isolated side.4. Includes onboard optocoupler isolation to prevent interference from external high-voltage relay circuits affecting the main control chip.5. Equipped with onboard TVS (Transient Voltage Suppressor) diodes to effectively suppress surge voltages and transient voltage spikes, offering lightning and ESD protection.6. Features onboard resettable fuses and protection diodes to ensure stable current and voltage output, protect against overcurrent and overvoltage, and enhance surge resistance.7. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.8. Housed in a DIN-rail mountable ABS protective case for convenient installation and safer operation.Specifications:1. Power supply voltage: 7V–36V2. Number of relay channels: 63. Communication protocols: RS485, CAN4. Contact type: One Normally Open (NO), One Normally Closed (NC)Specification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 9 Carton Weight 30.80kgs / 67.90lb Carton Size 32cm * 32cm * 47cm / 12.6inch * 12.6inch * 18.5inch Loading Container 20GP: 554 cartons * 9 pcs = 4986 pcs 40HQ: 1286 cartons * 9 pcs = 11574 pcs

Read more less

1. Based on the ESP32-S3 microcontroller, featuring an integrated Xtensa 32-bit LX7 dual-core processor with a clock speed of up to 240 MHz.2. Integrates 2.4 GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication, offering excellent RF performance.3. Features an onboard isolated RS485 interface for easy expansion and connection to various RS485 Modbus industrial modules or sensors.4. Features an onboard isolated CAN interface for easy expansion and connection to various CAN devices.5. Includes onboard pin headers for connecting to other devices.6. Equipped with an onboard USB Type-C interface for power supply, firmware downloading, and debugging; also includes a terminal block power input supporting a wide 7V–36V voltage range, suitable for industrial power applications.7. Features an onboard RTC (Real-Time Clock) chip to support scheduled tasks.8. Incorporates onboard digital isolation to protect the control chip from external signal interference.9. Features onboard integrated power isolation to provide stable isolated voltage, eliminating the need for an external power supply on the isolated side.10. Includes onboard RS485 transceiver indicators and CAN status indicators for easy monitoring of device operation.11. Housed in a DIN-rail mountable protective enclosure for convenient installation and enhanced safety.Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 50cm * 32cm * 30cm / 19.69inch * 12.6inch * 11.81inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs 40HQ: 1289 cartons * 100 pcs = 128900 pcs

Read more less

1. Uses the SP3485 chip controlled via UART; supports automatic transmit/receive switching for RS485 half-duplex communication.2. Uses the MCP2515 + SN65HVD230 combination controlled via SPI; enables CAN half-duplex communication.3. Features onboard integrated power isolation, providing stable isolated voltage without the need for an external power supply on the isolated side.4. Includes onboard optocoupler isolation to prevent interference from external high-voltage relay circuits affecting the main control chip.5. Equipped with onboard TVS (Transient Voltage Suppressor) diodes to effectively suppress surge voltages and transient voltage spikes, offering lightning and ESD protection.6. Features onboard resettable fuses and protection diodes to ensure stable current and voltage output, protect against overcurrent and overvoltage, and enhance surge resistance.7. Uses high-quality relays; supports loads up to 10A 250V AC or 10A 30V DC.8. Housed in a DIN-rail mountable ABS protective case for convenient installation and safer operation.Specifications:1. Power supply voltage: 7V–36V2. Number of relay channels: 63. Communication protocols: RS485, CAN4. Contact type: One Normally Open (NO), One Normally Closed (NC)Specification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 17cm * 11cm * 5cm / 6.69inch * 4.33inch * 1.97inch Qty per Carton 9 Carton Weight 30.80kgs / 67.90lb Carton Size 32cm * 32cm * 47cm / 12.6inch * 12.6inch * 18.5inch Loading Container 20GP: 554 cartons * 9 pcs = 4986 pcs 40HQ: 1286 cartons * 9 pcs = 11574 pcs

Read more less

1. The RDK S600 MCU Port Expansion Board (includes matching FPC ribbon cable) is a core expansion module for the D-Robotics RDK S600 series developer kit. It is primarily designed to expand MCU interface functionalities, supporting CAN FD, ADC, and more.2. Integrated Inertial Measurement Unit (IMU, model Bosch Sensortec BMI088) supports communication and control via the high-speed SPI-13 serial bus.3. Power Indicator: The front side of the MCU expansion board features 1 green LED indicator to show the power status and the connection state between the MCU expansion board and the RDK S600 mainboard.4. Interfaces: 5 x CAN FD (up to 8 Mbps), 1 x 30-pin header exposing up to 7 x ADC, 2 x I2C, 2 x SPI, and 1 x UART.5. Onboard Module: IMU: Bosch BMI088 (SPI)6. Operating Temperature: 0 to 65 degrees Celsius7. Product Dimensions: 50 mm x 70 mm x 12 mm8. Product Weight: 21.4 gSpecification: Package Weight One Package Weight 0.07kgs / 0.15lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 7.50kgs / 16.53lb Carton Size 42cm * 42cm * 20cm / 16.54inch * 16.54inch * 7.87inch Loading Container 20GP: 755 cartons * 100 pcs = 75500 pcs 40HQ: 1754 cartons * 100 pcs = 175400 pcs

Read more less

1. The RDK S600 Camera Expansion Board is a core module of the D-Robotics RDK S600 series developer kit. It is designed to convert the camera expansion interface on the developer kit into GMSL interfaces. The expansion board provides an 8-channel GMSL camera interface, making it convenient for developers to perform functional verification and secondary development.2. The camera expansion board is equipped with an external 12V power input interface for the GMSL cameras. When the total supply current demand of all GMSL cameras connected to the expansion board exceeds 700 mA at a voltage of 12V, the GMSL cameras must be powered through this DC power jack.3. The camera expansion board integrates 2 x Maxim MAX96712 deserializer chips, enabling the connection of up to 8-channel GMSL cameras, and can provide 12V power to the GMSL cameras through coaxial cables.4. Power Indicator: The back of the expansion board features 1 green LED indicator to show the power status and the connection state between the camera expansion board and the RDK S600 mainboard.6. Deserializer: 2 x Maxim MAX967127. GMSL Connector: 2 x FAKRA-Mini 4-in-18. External Power Supply: 12V DC, used only when the current demand exceeds 2.4 A, with a maximum of 4.8 A.9. Operating Temperature: 0 to 65 degrees Celsius10. Product Dimensions: 60 mm x 50.48 mm x 22.29 mm11. Product Weight: 34.7 gSpecification: Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 9.50kgs / 20.94lb Carton Size 42cm * 42cm * 20cm / 16.54inch * 16.54inch * 7.87inch Loading Container 20GP: 755 cartons * 100 pcs = 75500 pcs 40HQ: 1754 cartons * 100 pcs = 175400 pcs

Read more less

1. Aluminum alloy case designed specifically for the Raspberry Pi 4B; features grooved patterns on both the top and bottom covers to increase heat dissipation surface area for faster cooling.2. Built-in thermal pillars ensure effective passive cooling.3. Includes cutouts for the GPIO header and various ports; designed to accommodate WiFi and Bluetooth functionality while minimizing wireless signal attenuation.4. Note: Raspberry Pi 4B board not included.5. Dimensions: 90.5 x 65 x 33mm.Specification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 13cm * 10cm * 6cm / 5.12inch * 3.94inch * 2.36inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 38cm * 30cm * 42cm / 14.96inch * 11.81inch * 16.54inch Loading Container 20GP: 556 cartons * 72 pcs = 40032 pcs 40HQ: 1292 cartons * 72 pcs = 93024 pcs

Read more less

1. Industrial-grade DIN-rail enclosure designed specifically for Raspberry Pi 4B; includes a cooling fan and heatsink for excellent thermal performance.2. Made of aluminum alloy with an anodized, sandblasted finish for a premium look and feel.3. Spacious interior accommodates various Raspberry Pi expansion boards and supports PoE power supply for industrial applications.4. Features a cutout for the GPIO header to facilitate expansion board connections; designed to minimize signal attenuation for WiFi and Bluetooth communication.5. Dimensions: 102.5 x 68.6 x 38.4 mmPackage Contents:DIN-rail Case x 1Cooling Fan x 1HeatsinksScrew pack x 1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 14cm * 10cm * 6cm / 5.51inch * 3.94inch * 2.36inch Qty per Carton 40 Carton Weight 11.10kgs / 24.47lb Carton Size 32cm * 42cm * 32cm / 12.6inch * 16.54inch * 12.6inch Loading Container 20GP: 620 cartons * 40 pcs = 24800 pcs 40HQ: 1439 cartons * 40 pcs = 57560 pcs

Read more less

1. PoE power input: 38V ~ 57V DC 2. Power output: GPIO Header 5V 5A (MAX) 3. Product dimensions: 64.98 x 64.98 mm 4. Network standard: supports IEEE 802.3af/at (PoE / PoE+) 5. For Raspberry Pi 5 / CM 5, featuring an onboard 5V interface for use with official cases. Supports IEEE 802.3af/at network standard. 6. Works with PoE routers or switches supporting IEEE 802.3af/at; simply connect a single Ethernet cable to power and network the Raspberry Pi. Official case: 1. Input voltage: 5V DC (Powered via Raspberry Pi 5 fan header) 2. Fan speed control: PWM control with tachometer 3. Airflow: 2.79 CFM (Max) 4. Fan speed: 8000 RPM ?± 15% (Max) 5. Case material: ABS (base, frame, cover) and PC (fan assembly)Specification: Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 6.90kgs / 15.21lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. Equipped with a high-performance ESP32-C6 32-bit RISC-V processor with a clock speed of up to 160MHz.2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5, and integrates an onboard antenna for excellent RF performance.3. Built-in 512KB SRAM and 320KB ROM, with an external 16MB Flash memory.4. Uses a Type-C interface, eliminating the hassle of reversible insertion and improving user convenience and device compatibility.5. Onboard 1.54-inch capacitive LCD screen with 240 × 240 resolution and 262K color, capable of clearly displaying color images.6. Onboard ES7210 audio codec chip, supporting dual-microphone audio capture.7. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker.8. Onboard QMI8658. 9. Six-axis inertial measurement unit (3-axis accelerometer, 3-axis gyroscope) for motion attitude detection and expanded applications.10. Built-in ST7789 driver chip for SPI interface communication.11. Built-in CST816 capacitive touch chip for I2C interface communication (touch version only).12. Onboard PLUS and BOOT buttons with customizable functions for easy custom function development.13. Onboard 3.7V MX1.25 lithium battery charging/discharging interface.14. One I2C, one UART, and one USB pad are provided for external device connection and debugging, allowing for flexible configuration of peripheral functions.15. Onboard Micro SD card slot supports storage expansion and fast data transfer, facilitating data recording and media playback, and simplifying system circuit design.16. Display resolution: 240 x 240 pixels.17. Display colors: 262K. Communication Interface: 4-wire SPI18. Driver IC: ST778919. Effective Screen Size: 27.72 x 27.72 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs 40HQ: 1045 cartons * 126 pcs = 131670 pcs

Read more less

1. Equipped with a high-performance ESP32-C6 32-bit RISC-V processor with a clock speed of up to 160MHz.2. Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5, and integrates an onboard antenna for excellent RF performance.3. Built-in 512KB SRAM and 320KB ROM, with an external 16MB Flash memory.4. Uses a Type-C interface, eliminating the hassle of reversible insertion and improving user convenience and device compatibility.5. Onboard 1.54-inch capacitive LCD screen with 240 × 240 resolution and 262K color, capable of clearly displaying color images.6. Onboard ES7210 audio codec chip, supporting dual-microphone audio capture.7. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker.8. Onboard QMI8658. 9. Six-axis inertial measurement unit (3-axis accelerometer, 3-axis gyroscope) for motion attitude detection and expanded applications.10. Built-in ST7789 driver chip for SPI interface communication.11. Built-in CST816 capacitive touch chip for I2C interface communication (touch version only).12. Onboard PLUS and BOOT buttons with customizable functions for easy custom function development.13. Onboard 3.7V MX1.25 lithium battery charging/discharging interface.14. One I2C, one UART, and one USB pad are provided for external device connection and debugging, allowing for flexible configuration of peripheral functions.15. Onboard Micro SD card slot supports storage expansion and fast data transfer, facilitating data recording and media playback, and simplifying system circuit design.16. Display resolution: 240 x 240 pixels.17. Display colors: 262K. Communication Interface: 4-wire SPI18. Driver IC: ST778919. Effective Screen Size: 27.72 x 27.72 mmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 5cm / 3.94inch * 3.15inch * 1.97inch Qty per Carton 126 Carton Weight 8.00kgs / 17.64lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 126 pcs = 56700 pcs 40HQ: 1045 cartons * 126 pcs = 131670 pcs

Read more less

1. Display panel: LCD2. Display size: 1.85 inches3. Resolution: 360 x 3604. Display color: 262K colors5. Display interface: QSPI6. Display driver: ST779167. Touch chip: CST816S8. Touch interface: I2C9. Interface: USB Type-C10. Main control chip: ESP32-S3R811. SRAM / ROM: 512KB SRAM / 384KB ROM12. PSRAM / Flash: 8MB PSRAM / 16MB Flash13. Screen type: TFT LCD14. Screen control chip: Display: ST77916; Touch: CST816S15. On-board equipment:- QMI8658 six-axis sensor- ES8311 audio codec chip- ES7210 echo cancellation algorithm chip- BQ27220 battery detection chip- PCF85063 real-time clock- Dual microphone array- On-board speaker pad - Micro SD- Lithium battery charging and discharging interface16. Exposed interfaces: I2C, UART, USB pads17. Power supply interface: USB Type-C / 3.7V lithium battery interface18. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz19. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with built-in antenna20. Built-in 512KB SRAM and 384KB ROM, sealed with 8MB PSRAM and externally connected 16MB Flash21. Adopting Type-C interface, enhancing user convenience and device compatibility22. Equipped with a 1.85-inch capacitive touch high-definition LCD screen, 360 × 360 resolution, 262K color23. Equipped with ST77916 driver chip and CST816S capacitive touch chip, communicating via QSPI and I2C interfaces respectively, occupying fewer interface pin resources24. Equipped with dual microphone arrays, capable of implementing noise reduction and echo cancellation audio algorithms, suitable for precise voice recognition and near-field/far-field voice wake-up applications25. Equipped with QMI8658 six-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope)26. Equipped with PWR power switch-off button and BOOT user-defined button, facilitating function development27. Equipped with 3.7V MX1.25 lithium battery charging and discharging interface28. Exposed 1 GPIO, 1 UART and 1 USB interface, available for external devices and debugging use, flexible configuration of peripheral functionsSpecification: Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 9cm * 9cm * 5cm / 3.54inch * 3.54inch * 1.97inch Qty per Carton 120 Carton Weight 9.50kgs / 20.94lb Carton Size 47cm * 38cm * 32cm / 18.5inch * 14.96inch * 12.6inch Loading Container 20GP: 466 cartons * 120 pcs = 55920 pcs 40HQ: 1083 cartons * 120 pcs = 129960 pcs

Read more less

1. Display panel: electronic ink screen2. Display size: 1.54 inches3. Display resolution: 200 x 2004. Gray level: 25. Communication interface: SPI6. Global refresh: 20 seconds7. Fast refresh: 15 seconds8. Display color: red, yellow, black, white9. Viewing angle: 170 degrees10. Display mode: reflective11. This product is an ink screen AIoT development board, equipped with ESP32-S3 microcontroller, supporting Wi-Fi and BLE dual-mode communication12. Built-in 1.54-inch electronic ink screen, with extremely low power consumption, visible in ambient light, suitable for portable devices and long battery life scenarios13. Integrated RTC real-time clock, SHTC3 temperature and humidity sensor, Micro SD card slot, low-power audio codec chip circuit, and lithium battery charge and discharge management circuit14. Reserved USB, UART, I2C, and GPIO expansion interfaces for convenient function expansion and sensor connection, providing a flexible and reliable development platform for IoT terminals, electronic tags, and portable displays, etc.15. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz16. Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), with built-in internal antenna17. Built-in 512KB SRAM and 384KB ROM, and simultaneously stacked integrated 8MB Flash and 8MB PSRAM18. Equipped with 1.54-inch electronic ink screen, resolution 200 x 200, with high contrast and wide viewing angle characteristics19. Built-in audio codec chip, supporting voice acquisition and playback, facilitating the realization of AI voice interaction applications20. Built-in PCF85063 RTC real-time clock and SHTC3 temperature and humidity sensor, capable of achieving precise RTC time management and temperature/humidity monitoring21. Built-in Micro SD card slot, allowing external connection of Micro SD cards for storing images or files22. Built-in PWR and BOOT two customizable side buttons, facilitating the development of custom functions through button usage23. Reserved 2 x 6 2.54mm spacing pinout interfaces for convenient customer external expansion usageSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 6cm * 6cm * 5cm / 2.36inch * 2.36inch * 1.97inch Qty per Carton 288 Carton Weight 29.90kgs / 65.92lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 288 pcs = 126144 pcs 40HQ: 1018 cartons * 288 pcs = 293184 pcs

Read more less

1. PoE power Input: 38V ~ 57V DC input2. Power output: GPIO header 5V 5A (MAX)3. Product dimensions: 64.98 x 64.98mm4. Network standard: supports IEEE 802.3af/at (PoE / PoE+)5. For Raspberry Pi 5 / CM 5, onboard 5V interface, compatible with official enclosureSupports IEEE 802.3af/at network standard6. When used with PoE routers or switches supporting the IEEE 802.3af/at network standard, only one network cable is needed for the Raspberry Pi to connect to the network and be powered.Specification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 11cm * 11cm * 5cm / 4.33inch * 4.33inch * 1.97inch Qty per Carton 72 Carton Weight 4.70kgs / 10.36lb Carton Size 46cm * 35cm * 32cm / 18.11inch * 13.78inch * 12.6inch Loading Container 20GP: 517 cartons * 72 pcs = 37224 pcs 40HQ: 1201 cartons * 72 pcs = 86472 pcs

Read more less

1. This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It is equipped with a 4-inch, 720 × 720 resolution IPS circular touchscreen display and supports a wide range of human-machine interaction interfaces, including MIPI-CSI (with an integrated Image Signal Processor/ISP). It also supports USB OTG 2.0 HS for high-speed connectivity and features an onboard 40-pin GPIO expansion header compatible with select Raspberry Pi HATs, enabling broader application adaptability. The ESP32-P4 chip integrates digital signature peripherals and a dedicated key management unit to ensure data and operational security; designed for high-performance and high-security applications, it fully meets the demanding requirements of embedded systems regarding HMI support, edge computing capabilities, and I/O connectivity.2. High-performance MCU featuring RISC-V 32-bit dual-core and single-core processors3. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM4. Powerful image and audio processing capabilities; interfaces include a JPEG codec, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP), and H.264 video encoder5. 32 MB PSRAM stacked within the chip package; 32 MB NOR Flash integrated externally6. Onboard peripheral interfaces include MIPI-CSI, MIPI-DSI, USB 2.0 OTG HS, SDIO 3.0 TF card slot, dual microphones (supporting echo cancellation), speaker terminals, and RTC battery terminals7. Onboard 2 × 20 pin header exposing 28 additional programmable GPIOs8. Security mechanisms: Secure Boot, Flash encryption, hardware encryption accelerators, and a hardware random number generator. It also supports hardware access protection, enabling Access Permission Management (APM) and separation of privileges.Specifications:1. Resolution: 720 × 720 pixels (H×V)2. Color Gamut: 60% NTSC3. Contrast Ratio: 1200:14. Touch Controller IC: GT92715. Communication Interface: MIPI 2-lane6. Brightness: 350 cd/m27. Outline Dimensions: 126.00 × 126.00 (mm)8. Display Area: 101.52 × 101.52 (mm)Specification: Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 16cm * 16cm * 5cm / 6.3inch * 6.3inch * 1.97inch Qty per Carton 60 Carton Weight 21.30kgs / 46.96lb Carton Size 30cm * 44cm * 32cm / 11.81inch * 17.32inch * 12.6inch Loading Container 20GP: 631 cartons * 60 pcs = 37860 pcs 40HQ: 1465 cartons * 60 pcs = 87900 pcs

Read more less

1. Operating Voltage: 3.3V/5V2. Resolution: 360 x 360 pixels3. Brightness: 450 cd/square meters4. Contrast Ratio: 1200:15. Display Chip: ST779166. Touch Chip: CST816S7. Display Interface: QSPI8. Touch Interface: I2C9. Display Panel: IPS10. Touch Type: Capacitive11. Display Colors: 262K12. Display Size: Approx. 45.68 x 45.68 mm13. Dimensions: Approx. 55 x 55 x 9.1 mmFeatures:1. 360 x 360 resolution and 262K colors enable clear display of color images2. High transparency, fast response, and long service life3. Built-in ST77916 driver chip and CST816S capacitive touch chip; communicates via QSPI and I2C interfaces, respectively, without occupying excessive interface pin resources; compatible with ESP32 S3, Raspberry Pi Pico, STM32, and other control boards4. Provides example code for ESP32, Pico, STM32, and other platforms5. On-board level-shifting chip, compatible with 3.3V/5V power inputsSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 3cm / 3.94inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 40cm * 32cm * 30cm / 15.75inch * 12.6inch * 11.81inch Loading Container 20GP: 694 cartons * 100 pcs = 69400 pcs 40HQ: 1612 cartons * 100 pcs = 161200 pcs

Read more less

1. Typical measurement range: 0.02m - 5m2. Ambient light tolerance: 100,000 lux3. Field of view: 1.48 degrees4. Refresh rate: 30 Hz5. Protection rating: IP686. Operating temperature: -20 to 70 degrees Celsius7. Operating humidity: 35%-80% RH8. Laser safety class: LASER CLASS 1 (IEC 60825-1: 2014)9. Wavelength: 940 nm10. Communication Interface: RS48511. Communication Baud Rate: 115,20012. Supply Voltage: 4V - 5.6V13. Power Consumption: 100 mW - 140 mW14. Average Current/Peak Current: 25 mA/26 mA15. Housing Material: PC16. Storage Temperature: -40 to 80 degrees Celsius17. Weight: Approx. 15.8g18. Dimensions: Approx. 2.95 x 1.8cm; Cable Length: Approx. 60cmSpecification: Package Weight One Package Weight 0.04kgs / 0.10lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 100 Carton Weight 5.00kgs / 11.02lb Carton Size 42cm * 34cm * 20cm / 16.54inch * 13.39inch * 7.87inch Loading Container 20GP: 933 cartons * 100 pcs = 93300 pcs 40HQ: 2167 cartons * 100 pcs = 216700 pcs

Read more less

1. Typical ranging range: 0.02m - 4m2. Error: +/- (1% - 3%)3. Field of View (FOV): 25 - 30 degrees4. Refresh rate: 30Hz5. Ambient light immunity: 20K Lux6. Operating temperature: -20 to 70 degrees Celsius7. Operating humidity: 35% - 80% RH8. Laser safety class: LASER CLASS 1 (IEC 60825-1: 2014)9. Wavelength: 940nm10. Communication interface: UART11. Baud rate: 11520012. Data bits: 813. Stop bit: 114. Parity: None15. Supply voltage: 4V - 5.6V16. Power consumption: 100mW - 140mW17. Average/Peak current: 25mA/26mA18. Housing material: PC19. Storage temperature: -40 to 80 degrees Celsius20. Weight: Approx. 3g21. Dimensions: Approx. 17.37 x 13 x 6.88mmSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 7cm * 6cm * 2cm / 2.76inch * 2.36inch * 0.79inch Qty per Carton 200 Carton Weight 6.80kgs / 14.99lb Carton Size 36cm * 30cm * 30cm / 14.17inch * 11.81inch * 11.81inch Loading Container 20GP: 823 cartons * 200 pcs = 164600 pcs 40HQ: 1910 cartons * 200 pcs = 382000 pcs

Read more less

1. Made of high-transmittance PC, it features a lightweight yet sturdy design that protects the motherboard from friction and impact while allowing clear visibility of onboard components and indicator lights.2. The top and bottom protective plates feature precise slots for pin headers, ports, and connectors, enabling quick insertion and removal of expansion cables and modules without removing the enclosure.3. Compatible with both single-board (Arduino UNO Q) and combined configurations (UNO Q + UNO Media Carrier), meeting various expansion and development needs.4. Includes nylon posts, brass posts, and screw accessories for secure mounting; the assembly process is intuitive and quick.5. Dimensions: Approximately 8.4 x 6 x 1.7 cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 200 Carton Weight 20.80kgs / 45.86lb Carton Size 36cm * 30cm * 30cm / 14.17inch * 11.81inch * 11.81inch Loading Container 20GP: 823 cartons * 200 pcs = 164600 pcs 40HQ: 1910 cartons * 200 pcs = 382000 pcs

Read more less

Sensor:1. Model: Sony IMX4772. 12.3 megapixels: 4056 x 30403. CMOS diagonal length: 7.9 mm4. Pixel size: 1.55 μm (H) x 1.55 μm (V)5. Shutter type: Rolling shutterLens:1. Aperture (F): 2.82. Focal Length (EFL): 2.7 mm3. Field of View (FOV): 113 degrees (D)4. Distortion: Less than -1.5%Features:1. Equipped with Sony IMX477 image sensor, it delivers high-resolution, clear images up to 12.3 MP with rich detail capture2. Features a hardware-integrated IR-CUT switching mechanism that restores natural colors without color cast during the day; when paired with an infrared illuminator (not included), it supports night vision imaging to meet all-weather monitoring needs3. Equipped with a 113-degree wide-angle lens and rolling shutter design, providing a wider field of view and imaging coverage in confined spaces4. Compatible with Raspberry Pi series (e.g., 4B, 5, Zero 2 W, CM4/CM5), for NVIDIA Jetson series (driver support required), and open-source hardware development boards such as the RDK X55. Includes two types of flexible FPC cables 15-pin to 22-pin and 22-pin for quick and easy connection to motherboards with different connector interfaces6. Operating voltage: 3.3V7. Application scenarios: AI applications such as facial recognition, road marking recognition, and license plate recognition8. Dimensions: Approximately 3.8 x 2.5 cmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 9cm * 6cm * 4cm / 3.54inch * 2.36inch * 1.57inch Qty per Carton 200 Carton Weight 12.80kgs / 28.22lb Carton Size 38cm * 32cm * 20cm / 14.96inch * 12.6inch * 7.87inch Loading Container 20GP: 1096 cartons * 200 pcs = 219200 pcs 40HQ: 2545 cartons * 200 pcs = 509000 pcs

Read more less

1. Display Panel: LCD 2. Display Size: 2.73 inch3. Display Resolution: 320 x 320 pixels 4. Display Brightness: 620 cd/square meters5. Display Colors: 262K6. Contrast Ratio: 1200:17. Communication Interface: SPI8. Driver IC: ILI94889. Dimensions: Approx. 68 x 68 mmFeatures:1. Equipped with a high-performance ESP32-C5 RISC-V 32-bit single-core processor with a clock speed of up to 240 MHz 2. Features 384 KB of SRAM and 320 KB of ROM, along with 8 MB of on-board PSRAM and 32 MB of Flash, meeting the needs of program execution, graphical interfaces, and data storage 3. Integrates dual-band 2.4GHz and 5GHz Wi-Fi, Bluetooth 5.0 (LE), and IEEE 802.15.4 (supporting Zigbee 3.0 and Thread) wireless communication, with excellent RF performance4. Features a built-in 2.73-inch LCD display for displaying graphical interfaces, status information, data curves, and more 5. Three onboard customizable buttons facilitate various functions such as menu navigation, parameter configuration, and human-machine interaction6. Onboard TF card slot supports external storage expansion for storing images, logs, configuration files, or acquired data7. On-board lithium battery charge management chip, supporting the development of portable and battery-powered applications8. On-board six-axis sensor (three-axis accelerometer and three-axis gyroscope), usable for attitude detection and interactive control9. On-board RTC (Real-Time Clock), supporting applications such as time logging and offline timing10. On-board temperature and humidity sensor, suitable for environmental data acquisition and monitoring11. Features a USB Type-C interface for convenient power supply, program download, and debugging12. Supports development environments such as ESP-IDF and Arduino, with extensive documentation and an easy learning curve13. Provides multiple GPIO pins and peripheral interfaces for easy connection to sensors, actuators, and other modulesSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 11cm * 9cm * 3cm / 4.33inch * 3.54inch * 1.18inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 48cm * 33cm * 20cm / 18.9inch * 12.99inch * 7.87inch Loading Container 20GP: 841 cartons * 100 pcs = 84100 pcs 40HQ: 1954 cartons * 100 pcs = 195400 pcs

Read more less

1. Made of high-transmittance PC, it features a lightweight yet sturdy design that protects the motherboard from friction and impact while allowing clear visibility of onboard components and indicator lights.2. The top and bottom protective plates feature precise slots for pin headers, ports, and connectors, enabling quick insertion and removal of expansion cables and modules without removing the enclosure.3. Compatible with both single-board (Arduino UNO Q) and combined configurations (UNO Q + UNO Media Carrier), meeting various expansion and development needs.4. Includes nylon posts, brass posts, and screw accessories for secure mounting; the assembly process is intuitive and quick.5. Dimensions: Approximately 8.4 x 6 x 1.7 cmSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 200 Carton Weight 20.80kgs / 45.86lb Carton Size 36cm * 30cm * 30cm / 14.17inch * 11.81inch * 11.81inch Loading Container 20GP: 823 cartons * 200 pcs = 164600 pcs 40HQ: 1910 cartons * 200 pcs = 382000 pcs

Read more less

1. Screen Size: 10.1 inch2. Resolution: 1280 x 7203. Display Interface: HDMI4. Display Panel: IPS5. Viewing Angle: 170 degrees6. Backlight: QLED Quantum Dot7. Brightness: 350 cd/square meters8. Touch Type: Capacitive Touch9. Touch Points: 10-point touch10. Touch Interface: Micro USB 11. Touch Panel: G+G Tempered Glass12. OSD Menu: Adjust brightness/contrast13. Brightness Adjustment: Supports DDC/CI software dimming14. Audio Output: 3.5mm headphone jack, 4-pin connector Features:1. IPS panel with QLED quantum dot technology, offering color gamut coverage of up to 99% sRGB / 88% NTSC and a wide viewing angle of 170 degrees, providing clear and accurate color reproduction2. High-hardness (up to 6H) tempered glass panel (G+G structure) supports up to 10-point capacitive touch, offering smooth swiping and excellent wear and scratch resistance3. Supports adjusting display brightness via the DDC/CI protocol through system software, allowing for flexible adjustments based on ambient lighting4. Supports a wide range of systems, including the full for Raspberry Pi series, for Jetson series development boards, RK3576/Core3576, and Windows 7/8/8.1/10/11. It is driver-free and plug-and-play (some systems support single-point or multi-point touch)5. Features a resolution of 1280 x 720. The mainboard integrates an HDMI display port and a USB touch/power port, offering a compact design suitable for DIY projects and embedded device integrationPackage Contents:1. Display x 1 2. HDMI ribbon cable x 1 3. Micro-B cable x 1 4. Keypad x 1 5. Triangular stand x 1 6. Adapter x 1 7. Power adapter x 18. 4-pin dual-ended cable x 1Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 28cm * 20cm * 5cm / 11.02inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 13.00kgs / 28.66lb Carton Size 48cm * 30cm * 30cm / 18.9inch * 11.81inch * 11.81inch Loading Container 20GP: 617 cartons * 20 pcs = 12340 pcs 40HQ: 1432 cartons * 20 pcs = 28640 pcs

Read more less

1. Screen Size: 10.1 inch2. Resolution: 1280 x 7203. Display Interface: HDMI4. Display Panel: IPS5. Viewing Angle: 170 degrees6. Backlight: QLED Quantum Dot7. Brightness: 350 cd/square meters8. Touch Type: Capacitive Touch9. Touch Points: 10-point touch10. Touch Interface: Micro USB 11. Touch Panel: G+G Tempered Glass12. OSD Menu: Adjust brightness/contrast13. Brightness Adjustment: Supports DDC/CI software dimming14. Audio Output: 3.5mm headphone jack, 4-pin connector Features:1. IPS panel with QLED quantum dot technology, offering color gamut coverage of up to 99% sRGB / 88% NTSC and a wide viewing angle of 170 degrees, providing clear and accurate color reproduction2. High-hardness (up to 6H) tempered glass panel (G+G structure) supports up to 10-point capacitive touch, offering smooth swiping and excellent wear and scratch resistance3. Supports adjusting display brightness via the DDC/CI protocol through system software, allowing for flexible adjustments based on ambient lighting4. Supports a wide range of systems, including the full for Raspberry Pi series, for Jetson series development boards, RK3576/Core3576, and Windows 7/8/8.1/10/11. It is driver-free and plug-and-play (some systems support single-point or multi-point touch)5. Features a resolution of 1280 x 720. The mainboard integrates an HDMI display port and a USB touch/power port, offering a compact design suitable for DIY projects and embedded device integrationPackage Contents:1. Display x 1 2. HDMI ribbon cable x 1 3. Micro-B cable x 1 4. Keypad x 1 5. Triangular stand x 1 6. Adapter x 1 7. Power adapter x 18. 4-pin dual-ended cable x 1Specification: Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 28cm * 20cm * 5cm / 11.02inch * 7.87inch * 1.97inch Qty per Carton 20 Carton Weight 13.00kgs / 28.66lb Carton Size 48cm * 30cm * 30cm / 18.9inch * 11.81inch * 11.81inch Loading Container 20GP: 617 cartons * 20 pcs = 12340 pcs 40HQ: 1432 cartons * 20 pcs = 28640 pcs

Read more less

1. Connects for Raspberry Pi 5’s PCIe port via a 16-pin cable to provide an M.2 M-Key slot and an RJ45 Ethernet port, supporting booting the Raspberry Pi 5 from an NVMe solid-state drive2. Equipped with an RTL8125 network controller chip, it supports 2.5G high-speed network transmission and driver-free direct connection Raspberry Pi OS; it also supports IEEE 802.3af-compliant PoE (Power over Ethernet), enabling simultaneous data and power transmission over the Ethernet cable.3. The expansion slot is compatible with both 2230 and 2242 form factor M.2 NVMe solid-state drives and supports Gen2 transfer mode4. Offers three power supply options: a Type-C port, 7–24V screw-type terminal blocks, and a PoE Ethernet cable, meeting power requirements for various scenarios5. Integrates a Micro HDMI to standard HDMI female port function, supporting 4K video output, simplifying the connection process between the device and a display8. Dimensions: Approximately 86 x 52.5 x 49.5 mmPackage Contents:1. Adapter board x 12. 3-pin connector cable x 1 3. 3-pin connector cable (reverse orientation) x 1 4. Screw stud x 1 5. 16-pin FFC cable x 1Specification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 13cm * 9cm * 4cm / 5.12inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 44cm * 36cm * 20cm / 17.32inch * 14.17inch * 7.87inch Loading Container 20GP: 841 cartons * 100 pcs = 84100 pcs 40HQ: 1954 cartons * 100 pcs = 195400 pcs

Read more less