Consumer Electronics

1. Material: nylon, electronic components2. Use: AC power monitor3. Voltage measurement range: 80-260 (V)4. Current measurement range: 0-5A; 0-10A; 0-100A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-1100W; 0-22000W; 0-22000W7. Power factor measurement range: 0-1PF8. Energy consumption measurement range: 0-999kWh9. Measurement accuracy: 1 percent10. Using reinforced nylon material, three-point buckle design, the installation is firm and more durable11. Delicate material, comfortable feel12. The backlight can be turned on or off by short pressing the button, and the backlight status will be automatically saved when power off13. Dimensions: 8.96 x 4.96 x 2.425 cm

Read more less

1. Material: PBT, electronic components2. Use: DC power monitor3. Voltage measurement range: 0-300V4. Current measurement range: 0-300A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-90KW7. Energy consumption measurement range: 0-999kWh8. Measurement accuracy: 1 percent9. Using reinforced PBT material, high temperature resistance10. Embedded installation, simple and convenient11. HTN wide viewing angle LCD screen, clear and convenient to observe data12. Dimensions: 8.53 x 4.4 x 3.16 cm13. Weight: 120 grams

Read more less

1. Both 6-60V batteries and lithium batteries can be used2. LCD display, battery voltage, charging percentage and charging time at a glance3. Powerful functions, can automatically charge control, can control the charging time, can set and upload the corresponding parameters through the serial port4. Control voltage: DC6-60V5. Control current: within 10A6. Output type: direct output of various accumulators, lithium batteries7. Appearance size: about 7.9x4.2 cm8. Weight: about 30 gramsFunction Description:1. Automatic charging control function: by setting the upper limit voltage UP and lower limit voltage dn; when the battery voltage is less than or equal to the lower limit voltage dn, the relay is turned on, and the charger starts to charge the battery; when the battery voltage is greater than or equal to the upper limit voltage UP, the relay is turned off, Complete an automatic charge2. Charging time control function3. Serial data upload and parameter setting function: The system supports UART data upload and parameter setting function (TTL level)parameter settings:1. Press and hold the SET button to enter the parameter setting interface, the LCD will display SET2. After entering the parameter setting interface, short press the SET key to switch the set parameters3. After selecting the parameter, you can set it through the UP/DOWN key, support short press, long press (rapid increase or decrease)4. To set other parameters, repeat steps 2/35. After all parameter settings are completed, long press the SET button to exit and saveButton function description:In the running interface (main interface):1. Short press the SET button to display the currently set parameters2. Short press the UP button to switch to display the charging percentage and charging time3. Short press the DOWN button to select on/off the relay enable. If the relay enable is turned off, OFF will be displayed as a reminder and the relay is disconnected.4. Press and hold the UP button to set the status of the LCD backlight (L-P), the OFF backlight is always on, and the ON backlight will automatically turn off after 5-10 minutes5. Long press the SET button to enter the parameter settingAdditional features:1. Charging time recording function: When the charging time control is not turned on, the product will record a complete time. When entering the time display interface, the charging time will flash and display, and then exit the time display interface or clear it when the next charging is turned on (the relay is turned on).2. Parameter automatic detection: after setting the parameters and exiting, if the lower voltage limit dn is greater than or equal to the upper limit voltage up, the system will flash ERR as a reminder3. Battery connection detection: this product is attached to the battery, if the battery is not connected, the system will display nbE in the lower line as a reminder

Read more less

1. Measuring range: -200-1372 degrees Celsius (-328-2507 degrees Fahrenheit)2. High/low alarm: default 1300/-200 degrees Celsius3. Data storage: 9999 pens (TA612C 5000 pens)4. Data upload: TA612C can5. Report recording time: up to 99 hours from REC opening6. Interval setting: H:M/M:S7. Nut with bracket: 1/4 inch8. Sampling rate: about 1 time/second9. Automatic shutdown: about 15 minutes10. K-type thermocouple: probe measuring range 150-300 degrees Celsius11. Power supply: 1.5V AA (LRO6) battery x3 (not included), TA612C can also be powered by USB straight plug (with data cable)12. Size: about 17.7x7x3.5cmFeatures:1. Suitable for many occasions, object surface/liquid/air temperature measurement2. High-sensitivity K-type jack, high measurement accuracy, the thermocouple is in direct contact with the measured object, and is not affected by the intermediate medium3. It can be connected to different probes for temperature measurement, and supports a variety of K-type temperature measurement probes4. Mass data storage5. VA high-definition color screen double-line digital display, clear reading, easy to measure in various environments6. The upper and lower limit alarm values ??can be set. If the range is exceeded, the sound + light prompts7. TA612C can be connected by USB, data upload and real-time measurement

Read more less

1. Material: nylon, electronic components2. Use: AC power monitor3. Voltage measurement range: 80-260 (V)4. Current measurement range: 0-5A; 0-10A; 0-100A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-1100W; 0-22000W; 0-22000W7. Power factor measurement range: 0-1PF8. Energy consumption measurement range: 0-999kWh9. Measurement accuracy: 1 percent10. Using reinforced nylon material, three-point buckle design, the installation is firm and more durable11. Delicate material, comfortable feel12. The backlight can be turned on or off by short pressing the button, and the backlight status will be automatically saved when power off13. Dimensions: 8.96 x 4.96 x 2.425 cm

Read more less

1. 12V/24V/48V wide voltage, automatic identification2. Intelligent control, LCD color display, multiple protection3. Built-in circuit protection, WIFI APP control4. Simple design heat dissipation vents on both sides, fast heat dissipation, fine edging workmanship, smooth and rounded wiring, strong three-dimensional sense5. Comes with dual USB ports, easy to connect6. Rated current: 10A/20A/30A/40A/50A/60A7. Rated voltage: 12V/24V/48V8. Material: PVC9. Operating temperature: -20 to 50 degrees Celsius10. Application scenarios: villas, outdoor RVs, solar power generation systems, yachts and ships, solar billboards, solar street lights11. Suitable for lead-acid, ternary lithium, lithium iron phosphate batteries12. Dimensions: 10A/20A: 11.5x14.5x7CM, 30A/40A: 13.3x7x3.5CM, 50A/60A: 15.5x19.7x8.6CM

Read more less

1. Material: ABS, electronic components2. Gear: 2 gears wind speed3. Built-in battery: 250mAh lithium battery4. Charging time: 1-2 hours5. Use time: 30 minutes6. Hidden blade design, using turbine air duct technology, the wind is softer7. Two-speed wind selection, one-key control, to meet daily needs8. Wide-angle air outlet, the air is cooler9. Adopt small size and high power brushless motor, small and portable, strong wind10. Rubber keychain lanyard, easy to carry11. Dimensions: 9 x 7 x 5 cmPacking list:-Fan x 1-Keychain x 1-Charging cable x 1

Read more less

1. Material: PBT, electronic components2. Use: DC power monitor3. Voltage measurement range: 0-300V4. Current measurement range: 0-300A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-90KW7. Energy consumption measurement range: 0-999kWh8. Measurement accuracy: 1 percent9. Using reinforced PBT material, high temperature resistance10. Embedded installation, simple and convenient11. HTN wide viewing angle LCD screen, clear and convenient to observe data12. Dimensions: 8.53 x 4.4 x 3.16 cm13. Weight: 120 grams

Read more less

1. Produced with precision components, low power consumption, no switch, can work after plugging in the power supply, with colorful breathing lights2. Acting on the space environment, it can relax peoples body and mind, improve the body perception of sound and images, improve human health, work efficiency, and mental stress.3. It can be placed on the table or bookshelf 1.5 meters above the ground in the bedroom4. All-around design, no dust accumulation will affect the circuit5. Front and back double-sided transmitting antennas6. Input voltage: DC12V7. Current: above 0.5A8. Material: PCB

Read more less

1. Material: nylon, electronic components2. Use: AC power monitor3. Voltage measurement range: 80-260 (V)4. Current measurement range: 0-5A; 0-10A; 0-100A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-1100W; 0-22000W; 0-22000W7. Power factor measurement range: 0-1PF8. Energy consumption measurement range: 0-999kWh9. Measurement accuracy: 1 percent10. Using reinforced nylon material, three-point buckle design, the installation is firm and more durable11. Delicate material, comfortable feel12. The backlight can be turned on or off by short pressing the button, and the backlight status will be automatically saved when power off13. Dimensions: 8.96 x 4.96 x 2.425 cm

Read more less

1. 12V/24V/48V wide voltage, automatic identification2. Intelligent control, LCD color display, multiple protection3. Built-in circuit protection, WIFI APP control4. Simple design heat dissipation vents on both sides, fast heat dissipation, fine edging workmanship, smooth and rounded wiring, strong three-dimensional sense5. Comes with dual USB ports, easy to connect6. Rated current: 10A/20A/30A/40A/50A/60A7. Rated voltage: 12V/24V/48V8. Material: PVC9. Operating temperature: -20 to 50 degrees Celsius10. Application scenarios: villas, outdoor RVs, solar power generation systems, yachts and ships, solar billboards, solar street lights11. Suitable for lead-acid, ternary lithium, lithium iron phosphate batteries12. Dimensions: 10A/20A: 11.5x14.5x7CM, 30A/40A: 13.3x7x3.5CM, 50A/60A: 15.5x19.7x8.6CM

Read more less

1. 12V/24V/48V wide voltage, automatic identification2. Intelligent control, LCD color display, multiple protection3. Built-in circuit protection, WIFI APP control4. Simple design heat dissipation vents on both sides, fast heat dissipation, fine edging workmanship, smooth and rounded wiring, strong three-dimensional sense5. Comes with dual USB ports, easy to connect6. Rated current: 10A/20A/30A/40A/50A/60A7. Rated voltage: 12V/24V/48V8. Material: PVC9. Operating temperature: -20 to 50 degrees Celsius10. Application scenarios: villas, outdoor RVs, solar power generation systems, yachts and ships, solar billboards, solar street lights11. Suitable for lead-acid, ternary lithium, lithium iron phosphate batteries12. Dimensions: 10A/20A: 11.5x14.5x7CM, 30A/40A: 13.3x7x3.5CM, 50A/60A: 15.5x19.7x8.6CM

Read more less

1. Material: ABS, electronic components2. Gear: 2 gears wind speed3. Built-in battery: 250mAh lithium battery4. Charging time: 1-2 hours5. Use time: 30 minutes6. Hidden blade design, using turbine air duct technology, the wind is softer7. Two-speed wind selection, one-key control, to meet daily needs8. Wide-angle air outlet, the air is cooler9. Adopt small size and high power brushless motor, small and portable, strong wind10. Rubber keychain lanyard, easy to carry11. Dimensions: 9 x 7 x 5 cmPacking list:-Fan x 1-Keychain x 1-Charging cable x 1

Read more less

1. Lithium battery lead-acid switch, with memory function, DC output2. The default charging mode of lithium battery, you can switch the lead-acid battery with one key3. The buttons are separated from the USB on the left and right to prevent the data cable from loosening when operating the buttons to prevent damage to the device4. Easy to operate, save setup time5. Control mode: PWM modulation mode6. Rated charging current: 10A/20A/30A7. Rated discharge current: 10A8. System voltage: 12/24V9. Operating temperature: -35 to 60 degrees Celsius10. USB output: 5V/2A11. Material: PVC12. Size: 13.3x7x3.5CM13. Weight: about 131G

Read more less

1. Input voltage: 6.5-36V (the input voltage is lower than 6.5V, the current accuracy is inaccurate, and the LCD display is abnormal if it is lower than 5.5V)2. Output voltage: 1.2-32V, the default output is 5V step-down type, the output voltage can only be lower than the input voltage, and the voltage difference is more than 2V3. Output current: It can work stably at 3.5A for a long time, and it can reach about 4.5A with fan enhanced heat dissipation (adjustable limit current can reach about 4.2-4.5A)4. Output power: natural heat dissipation 50W (within 3.5A), plus fan to enhance heat dissipation 75W5. Voltage display: resolution 0.05V, range 1.2-32V6. Current display: resolution 0.005A, range 0-4.5A7. Conversion efficiency: about 94%, depending on the voltage difference and current efficiency8. Working current: about 30mA9. Input reverse polarity protection: yes10. Anti-backflow at the output: no (if charging the battery, first power on the module and then connect the battery, and ensure that the battery voltage is lower than the output voltage; if possible, connect an anti-backflow diode in series with the output positive pole)11. Short circuit protection: yes12. Size: about 70.5x48.4x28mm13. Weight: about 65g Features:1. Crystal shell, beautiful design, good touch texture of buttons, and output voltage set by button2. The button can control the output to turn off and on, and can set the power-on default to ON or OFF3. LCD can display input and output voltage, output current and output power4. The input terminal is protected against reverse connection, and the reverse connection will not burn5. High efficiency, high current, low heat generation, constant current value can be adjusted around 0-4.5A, suitable for office power supply, high-power LED constant current drive, lithium battery charging, etc.Function Description:1. There are IN/OUT and ON/OFF buttons on the left side of the module: the IN/OUT button switches the display of input voltage and output voltage, long press to switch the display of output current and output power; the ON/OFF button controls the output ON or OFF, long press Press to set the default output state is ON or OFF at the next power-on2. There are +/- two buttons on the right side of the module: + button press the output voltage to increase 0.05V, long press to continuously increase, and then long press to continuously increase 0.1V, 1V in slow steps; - button press the output voltage Decrease 0.05V, long press to continuously decrease, and then long press to continuously decrease 0.1V, 1V in slow steps3. ADJ-I is the current setting potentiometer. Turn clockwise to increase the set current. When the load current reaches the set current, it enters the constant current state, and the CC constant current indicator (red) lights up. The OUT indicator is the output status indicator, it is on when there is voltage at the output terminal, otherwise it is off; the CHAR indicator is the charging indicator, which is on when charging, and the FULL indicator is the full indicator. If the set constant current value is 2A, charging When the current reaches below 0.2A, turn the light, the FULL indicator is on, and the CHAR indicator is offInstructions:1. Use as an ordinary step-down module with overcurrent protection capability- Press the button to set the output voltage to the desired voltage value- Rotate the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (connect the two test leads directly to the output terminal), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the overcurrent protection value you want to set. (For example, the current value displayed by the multimeter is 2A, then the current can only reach 2A when the module is used, and the red constant current indicator light is on when the current reaches 2A, otherwise the indicator light is off) 2. Use as a battery charger- The module without constant current function cannot be used to charge the battery. Because the voltage difference between the exhausted battery and the charger is very large, the charging current is too large and the battery is damaged, so the battery should be used at the beginning. Constant current charging, when the charging reaches a certain level, it will automatically switch back to constant voltage charging- Determine the float voltage and charging current of the battery to be recharged; (if the lithium battery parameter is 3.7V/2200mAh, then the float voltage is 4.2V, and the charging current can reach 1C, that is, 2200mA)- Under no-load conditions, the output voltage of the button reaches the floating charge voltage; (if charging a 3.7V lithium battery, adjust the output voltage to 4.2V)- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined charging current value- Connect the battery and charge (when setting: no battery is connected to the output terminal)3. Used as a high-power LED constant current driver module- Determine the operating current and operating voltage needed to drive the LED- Under no-load conditions, press the button to set the output voltage to reach the LED working voltage- First turn the ADJ-I current adjustment potentiometer counterclockwise to the end, then measure the output short-circuit current with the 10A current range of the multimeter (just connect the two test leads to the output terminal directly), and adjust the ADJ-I constant current potentiometer clockwise to make the output The current reaches the predetermined LED operating current- Connect the LED, test the machine (when setting: output no-load, do not connect the LED light) Precautions: 1. It is forbidden to short-circuit the input IN- of the module with the output OUT-, otherwise the constant current function will fail 2. Make sure that the power of the power supply is always greater than the power required by the output load. When the module is seriously hot, please reduce the power usage.

Read more less

1. Material: PBT, electronic components2. Use: DC power monitor3. Voltage measurement range: 0-300V4. Current measurement range: 0-300A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-90KW7. Energy consumption measurement range: 0-999kWh8. Measurement accuracy: 1 percent9. Using reinforced PBT material, high temperature resistance10. Embedded installation, simple and convenient11. HTN wide viewing angle LCD screen, clear and convenient to observe data12. Dimensions: 8.53 x 4.4 x 3.16 cm13. Weight: 120 grams

Read more less

1. LCD displays current battery status2. Dual USB interface, dual button operation3. Charging mode: PWM4. Waterproof grade: IP325. Photovoltaic voltage: 50V6. Current: 30A7. Voltage: 12/24V8. Material: PVC9. Operating temperature: -35 to 60 degrees Celsius10. Size: 17x4.2x9.1CM11. Weight: about 260G

Read more less

1. 12V/24V/48V wide voltage, automatic identification2. Intelligent control, LCD color display, multiple protection3. Built-in circuit protection, WIFI APP control4. Simple design heat dissipation vents on both sides, fast heat dissipation, fine edging workmanship, smooth and rounded wiring, strong three-dimensional sense5. Comes with dual USB ports, easy to connect6. Rated current: 10A/20A/30A/40A/50A/60A7. Rated voltage: 12V/24V/48V8. Material: PVC9. Operating temperature: -20 to 50 degrees Celsius10. Application scenarios: villas, outdoor RVs, solar power generation systems, yachts and ships, solar billboards, solar street lights11. Suitable for lead-acid, ternary lithium, lithium iron phosphate batteries12. Dimensions: 10A/20A: 11.5x14.5x7CM, 30A/40A: 13.3x7x3.5CM, 50A/60A: 15.5x19.7x8.6CM

Read more less

1. Three-in-one electronic clock module, integrating three practical functions: time, thermometer and voltmeter2. Using RX8025T clock chip, the timing accuracy is stable3. The lengthened temperature probe can effectively solve the problem that the temperature affected by the module temperature is not accurate enough4. Power supply voltage: DC5.0-30V5. Temperature function range: -40-120 degrees Celsius, resolution 0.16. Voltmeter function range: DC5-30V (requires pure DC power supply, it is not recommended to use 24V battery, because the voltage may be too high during charging and burn)7. Size: about 4x1.4x1.3cmFunction and usage instructions:1. Adjust time, date, year, voltage error, temperature error cycle display item definition, alternate display interval time2. In the non-setting state, press the left key to enter the time adjustment (note that the colon in the middle is bright):- At this time, the minute bar starts to flash, press the right button to increase, the adjustment range is 00-59, after adjusting, press the left button again, the hour bar starts to flash, press the right button to increase, the adjustment range is 00-23- After adjusting the hour, press the left button again to enter the date adjustment (note that the colon in the middle is off), at this time the date column starts to flash, press the right button to increase, the adjustment range is 1-31, after the date is adjusted, press the left button again key, the month column starts to flash, press the right key to increase, the adjustment range is 1-12, after adjusting the date, press the left key again, the year column starts to flash, press the right key to increase, the adjustment range is 2012-2049- After adjusting the year, press the left key again to enter the error calibration function of the displayed voltage, the unit is 0.1V, a positive number means increase, and a negative number means decrease- Then press the left key again to enter the temperature error calibration setting, press the right key to increase, a positive number means increase, a negative number means decrease, the unit is Celsius- Press the left button again to enter the definition function dd option of the display item in the cycle display state,Press the right button to change the value: (dd:0) time + temperature + voltage, (dd: 1) time + temperature, (dd: 3) time + voltage- Press the left button again to enter the cycle display alternate interval time dF option, press the right button to change the value, the larger the value, the longer the interval- Press the left button again to save all the set values ​​and return to the normal display state3. Switch display items: in the non-setting state, press the right key to switch the display items, and the display will switch between the time-date-temperature-voltage alternate display

Read more less

1. Measuring range: -200-1372 degrees Celsius (-328-2507 degrees Fahrenheit)2. High/low alarm: default 1300/-200 degrees Celsius3. Data storage: 9999 pens (TA612C 5000 pens)4. Data upload: TA612C can5. Report recording time: up to 99 hours from REC opening6. Interval setting: H:M/M:S7. Nut with bracket: 1/4 inch8. Sampling rate: about 1 time/second9. Automatic shutdown: about 15 minutes10. K-type thermocouple: probe measuring range 150-300 degrees Celsius11. Power supply: 1.5V AA (LRO6) battery x3 (not included), TA612C can also be powered by USB straight plug (with data cable)12. Size: about 17.7x7x3.5cmFeatures:1. Suitable for many occasions, object surface/liquid/air temperature measurement2. High-sensitivity K-type jack, high measurement accuracy, the thermocouple is in direct contact with the measured object, and is not affected by the intermediate medium3. It can be connected to different probes for temperature measurement, and supports a variety of K-type temperature measurement probes4. Mass data storage5. VA high-definition color screen double-line digital display, clear reading, easy to measure in various environments6. The upper and lower limit alarm values ??can be set. If the range is exceeded, the sound + light prompts7. TA612C can be connected by USB, data upload and real-time measurement

Read more less

1. Material: PBT, electronic components2. Use: DC power monitor3. Voltage measurement range: 0-300V4. Current measurement range: 0-300A5. Frequency measurement range: 45-65HZ6. Power measurement range: 0-90KW7. Energy consumption measurement range: 0-999kWh8. Measurement accuracy: 1 percent9. Using reinforced PBT material, high temperature resistance10. Embedded installation, simple and convenient11. HTN wide viewing angle LCD screen, clear and convenient to observe data12. Dimensions: 8.53 x 4.4 x 3.16 cm13. Weight: 120 grams

Read more less

1. Lithium battery lead-acid switch, with memory function, DC output2. The default charging mode of lithium battery, you can switch the lead-acid battery with one key3. The buttons are separated from the USB on the left and right to prevent the data cable from loosening when operating the buttons to prevent damage to the device4. Easy to operate, save setup time5. Control mode: PWM modulation mode6. Rated charging current: 10A/20A/30A7. Rated discharge current: 10A8. System voltage: 12/24V9. Operating temperature: -35 to 60 degrees Celsius10. USB output: 5V/2A11. Material: PVC12. Size: 13.3x7x3.5CM13. Weight: about 131G

Read more less

1. Material: ABS, electronic components2. Specifications: 4 terminals3. Scope of application: MODEM, CNC machine tools, industrial instruments, meters, testing equipment monitoring systems, automation control equipment and notebooks4. Output: 5V/200MA5. Support STC microcontroller download6. Support 115200 high baud rate7. Support serial port setting and debugging8. Distribute serial port debugging software9. No external power supply, USB interface to the computer10. Length: 31.5 cm

Read more less

1. Power-saving automatic shutdown function (automatic shutdown after 5 minutes of inactivity)2. High-definition large-screen display panel, easy to read data3. High-sensitivity induction probe, aluminum alloy probe is connected to the probe and inserted into the soil, and the induction transmission parameter is sent to the display screen (note: the probe protective cover should be removed when using it)4. The angle reading can be adjusted, easy to use, parallel placement / vertical 90 degrees5. Test range: light intensity, pH, soil moisture, soil temperature, ambient humidity (TA8671 does not have this function)6. Scope of application: planting of potted plants, orchards, trees, vegetables, farmland, etc.7. Probe length: about 20 cm8. Power supply: a 9V battery (not included)9. Size: about 29x7.7cm

Read more less

1. Working voltage: DC 5-30V, input reverse polarity protection2. Rated current: 5A, up to 15A3. Power: up to 150W4. Working frequency: 1-99KHz adjustable, 1KHz step, default frequency 20KHZ5. Duty cycle: 0-100 percent, 1 percent step6. Hole size: about 7.5x3.9cm7. Appearance size: about 7.9x4.3x2.6 cm8. Weight: about 41gFeatures:1. Comes with a start and stop button, and can be controlled by an external switch to meet a variety of control needs2. Motor soft start function, the current increases slowly when starting the motor, no inrush current, effectively protects the motor and prolongs the service life of the motor3. The duty cycle, upper and lower limits of the duty cycle and operating frequency can be set, which is convenient foroperating characteristics of the machine4. The digital encoder knob adjusts the motor speed, with higher precision and better consistency5. With standard 5135 instrument shell, easy to install

Read more less

1. AC voltage: 0.001-600V2. DC voltage: 0.1mV-600V3. TA802A DC/AC current: 0.01-600mA4. Capacitance measurement: 1nF-60000UF5. Frequency measurement: TA802A: 40Hz-6MHz, TA802B: 40Hz-9.9MHz6. Resistance measurement: 0.1 ohm-60 megohm7. Display: up to 6000 counts8. Function: logic level (TA802B does not have this function), NCV measurement, zero/fire wire measurement, automatic shutdown, backlight display, flashlight lighting9. Power supply: 2 AA batteries (not included)10. Weight: about 110 grams11. Size: about 19.8x5.1x3.2cmFeatures:1. Pen body design, light and portable2. With torch lighting function3. Large-screen high-definition backlight display, the reading is clearer4. The screen can be rotated 180 degrees, two-way display, multi-angle viewing5. Intelligent measurement, automatic identification, automatic measurement of AC and DC voltage/resistance/on/off buzzer6. Sensitive rotary dial, easy to operate7. Anti-slip waist design, comfortable to touchpacking list:- Host x1- Cloth bag x1- Pen x1- Manual x1

Read more less

1. Range: 100,000 Lux2. Resolution: 0.1Lux3. Data recording: 50 groups4. Spectral response: automatic/manual5. Sampling rate: about 2 times/second6. Photoreceptor: photodiode with filter lens7. Function: Lux/Fc conversion, reading lock, low voltage prompt8. Power supply: 1.5V AAA battery x2 (not included)9. Size: about 18.5x5.5x3 cm10. Weight: about 150 gramsFeatures:1. The back bracket design can be placed on the desktop for stable measurement according to the usage scenario2. Support data storage function, easy to view measurement data, can store 50 sets of data3. High-sensitivity photoreceptor, sampling frequency 0.5 times/second, accurate and reliable measurement4. With soft rubber protective cover, effectively anti-drop, dust-proof and shock-proof, comfortable to handle5. Large range, suitable for use in various scenarios, home, school, factory, laboratory, etc.

Read more less

1. Voltage: DC12-24V2. Frequency: 50/60HZ3. Installation method: indoor, ceiling installation4. HF system: 5.8GHz CW radio wave, ISM band5. Transmitting power: less than 10mW6. Power: 70W (DC 12V)7. Detection angle: 360 degrees8. Distance: about 1-10m (radius) adjustable9. Working delay: 10 seconds to 3 minutes10. Light control illumination: about 2-2000 LUX11. Power consumption: about 0.5W12. Description: 807 with power output, 807K without power output13. Applicable environment: corridors, toilets, living rooms, corridors, warehouses, garages, etc.14. Installation reminder: the induction switch has a transmission blind spot in the central area. If it is installed in a small indoor environment (such as bathroom, kitchen), try to install it on the side or in the corner, so that the induction area will be more effective on the side. otherwise, the vertical center activity may not be sensed15. Size: about 7.6x4.1x3.9cm

Read more less

1. Material: Environmentally friendly ABS material2. Control method: voice3. Working voltage: 5V/1A4. Interface: USB5. Power source: USB connection power6. Wireless distance: 10m7. Offline voice control, no need to download APP, networking and other operations, plug and play8. Memory algorithm with surround design infrared remote control, intelligent control, easy to use9. The USB interface is connected to the power supply, which is easy to use10. Small size, easy to carry11. Dimensions: 7.6 x 3.1 x 1.8 cm

Read more less

1. AC voltage: 0.001-600V2. DC voltage: 0.1mV-600V3. TA802A DC/AC current: 0.01-600mA4. Capacitance measurement: 1nF-60000UF5. Frequency measurement: TA802A: 40Hz-6MHz, TA802B: 40Hz-9.9MHz6. Resistance measurement: 0.1 ohm-60 megohm7. Display: up to 6000 counts8. Function: logic level (TA802B does not have this function), NCV measurement, zero/fire wire measurement, automatic shutdown, backlight display, flashlight lighting9. Power supply: 2 AA batteries (not included)10. Weight: about 110 grams11. Size: about 19.8x5.1x3.2cmFeatures:1. Pen body design, light and portable2. With torch lighting function3. Large-screen high-definition backlight display, the reading is clearer4. The screen can be rotated 180 degrees, two-way display, multi-angle viewing5. Intelligent measurement, automatic identification, automatic measurement of AC and DC voltage/resistance/on/off buzzer6. Sensitive rotary dial, easy to operate7. Anti-slip waist design, comfortable to touchpacking list:- Host x1- Cloth bag x1- Pen x1- Manual x1

Read more less

1. Material: iron, plastic2. Weight: 1057 grams3. Weight: 1.8kg (MAX)4. Metal adapter, can be extended to connect a variety of devices5. Double-layer blowout cloth, clear sound6. Stretch length: 800mm7. Storage length: 410mm8. Base clip desktop thickness: 65mm (MAX)Packing list:Metal Adapter x 1Microphone Clip x 1Sponge air hood x 1Blowout Net x 1Nylon tape x 4

Read more less

1. Input voltage range: 6-32V2. Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge3. Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)4. Support fast charging protocol: BC1.2, Apple, Samsung protocol, Qualcomm QC2.0 and 3.0, MTKPE1.1/PE2.0, Huawei fast charging protocol AFC, Spreadtrum fast charging protocol SFCP5. Application: solar panel to mobile phone charging, vehicle charging transformation, driving recorder power supply, household power supply transformation6. Size: about 3.7x2x1cm/pc7. Weight: 7.5g/pieceFeatures:1. Input voltage 6-32V, with anti-reverse polarity protection, with fuse2. The output voltage is 3-12V, which can be automatically adjusted according to the agreement3. Output voltage cable compensation function, with TVS output protection to protect mobile phones4. Support a variety of fast charging protocols5. Input overvoltage, undervoltage and overcurrent protection6. Output overcurrent and short circuit protection7. Overall over temperature protection

Read more less

1. Can be equipped with USB adapter board, Micro USB as input, easy to use2. The voltage regulator adopts a multi-turn precision long-handle potentiometer, which can be directly adjusted manually3. With a beautiful shell, the color of the output voltage display will be shipped randomly4. Input: USB 5V male input5. Output: 1-24V6. Power: up to 3W7. Size: about 7x2.3x1.3cm8. Weight: about 25g

Read more less

1. Working voltage: DC 5-36V2. Trigger signal source: high-level trigger (DC 3.0V-24V) signal ground and system ground are not common to improve the anti-interference ability of the system (you can also short-circuit the common ground by yourself)3. Output capacity: DC 5V--36V, continuous current 15A at room temperature, power 400W, under auxiliary cooling conditions, the current can reach 30A4. Quiescent current: 15mA5. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters will be remembered forever after power off6. Size: about 6x3.4x1.2cm7. Note: The module is an active live output, the voltage of the output terminal (load terminal) is equal to the input terminal voltage (DC 5V--36V)Features:1. Realize high-frequency, fast and frequent on-off of the circuit2. The on-off process will not produce noise, no electrical sparks, and no electromagnetic interference.3. Adopt dual MOS parallel active output, lower internal resistance, higher current, strong power, 15A, 400W at room temperature, which meets the use of most equipment4. It is used to control motors, light bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. Through this module, these devices can be easily controlled, which is very convenient5. Wide voltage operation (5-36V), most devices can be used, very convenient6. The interface is clear and simple, powerful and easy to operate7. One-key emergency stop function (STOP key), with reverse connection protection, reverse connection will not burn8. Added sleep mode, after enabling, if there is no operation within 5 minutes, the display will be automatically turned off, and any key will wake up9. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately10. All setting parameters are automatically saved after power off

Read more less

1. Input voltage: DC 5.0-30V (under 4.7V with under-voltage protection LVP)2. Output voltage: DC 0.6-30V3. Output current: 0-4.0A4. Output power: 35W under natural cooling, up to 50W under air cooling5. Soft start: yes6. Input reverse connection protection: yes, reverse connection will not burn7. Anti-backflow at the output: yes, it can be directly connected to the battery8. Output short-circuit protection: yes, the output terminal can be directly short-circuited9. Temperature protection (OTP): yes, 100 degrees Celsius10. Working frequency: 180KHZ11. Recommended opening size: about 7.8x3.9cm12. Appearance size: about 7.9x4.2x2.4 cm13. Weight: about 93gFeatures:1. Power LCD display, clear interface, easy to operate2. Digitally controlled voltage and current adjustment, convenient and fast3. Hardware protection: input anti-reverse connection protection, reverse connection does not burn, output short-circuit protection, short-circuit does not burn, output anti-backflow, no need to add an anti-backflow diode when charging the battery4. Software protection: over voltage protection (OVP), over current protection (OCP), over power protection (OPP), over temperature protection (OTP), input under voltage protection (LVP)5. Full of materials, stable performance and wide range of uses6. Long press the rotary encoder button to enter the setting interface, which is easy to operate

Read more less

1. The hose is 370mm in normal state and can be stretched to 1.7m2. No need to hold down the pet brush when using it3. The brush head can easily take care of the long and short hair of pets4. The pinhole of the brush head is smooth and does not hurt pets5. The length of the brush head is 295 mm6. Suitable for Dyson V7/ V8 /V10/ V11 /V15

Read more less

1. Suitable for Dyson vacuum cleaner V10/V112. The upgrade button lengthens the bone position, bears stronger pressing force and lasts longer3. Vacuum cleaner replacement accessories, make your operation and cleaning more convenient4. Material: ABS5. Net weight: 3g/pc

Read more less

1. Suitable for Dyson DC30 DC31 DC34 DC35 DC44 DC45 DC58 DC59 DC61 DC62 DC74 V6 models2. Suspend the main unit of the vacuum cleaner while charging3. Dimensions: 24 x 4.4 cm4. Note: The hanger itself cannot be charged5. Packing list: 1 charging stand + screws

Read more less

1. Material: HEPA filter paper, plastic2. The filter maintains the clean performance of the robot while reducing the penetration of dust, pollen and other allergens into the air you breathe.3. It is recommended that you replace the filter every 1-3 months.4. Suitable for Samsung SC885B, SC885F, SC885H, SC8874, SC8836, SC88H1, SC8810, SC8811, SC8813, SC8815, SC8820, SC8821, SC8822, SC8830, SC8833, SC8834, SC8835, SC8850, SC88852, 08 SC885A, SC88852, SC88857 , SC8872, SC8873, SC88B0, SC88H0, SC88L0, SC88P0, VCC88P0H1B, SC88E0, SC88E1 Robot Vacuum5. Size: about 14.8cm x 10.2cm x 2.5cm

Read more less

1. Material: Silicone2. Applicable models: for Amazon Fire TV stick 4k 2nd generation3. Features: waterproof, shock absorption, soft4. Precise hole position, does not affect normal use5. Back texture design, non-slip and easy to grip6. All-inclusive design, shock absorption and drop resistance7. Made of high-quality silicone material, soft and durable8. Note: Only the protective case will be shipped, nothing else!

Read more less

1. Material: Silicone2. Applicable models: for Amazon Fire TV stick 4k 2nd generation3. Features: waterproof, shock absorption, soft4. Precise hole position, does not affect normal use5. Back texture design, non-slip and easy to grip6. All-inclusive design, shock absorption and drop resistance7. Made of high-quality silicone material, soft and durable8. Note: Only the protective case will be shipped, nothing else!

Read more less

1. The hose is 370mm in normal state and can be stretched to 1.7m2. No need to hold down the pet brush when using it3. The brush head can easily take care of the long and short hair of pets4. The pinhole of the brush head is smooth and does not hurt pets5. The length of the brush head is 295 mm6. Suitable for Dyson V7/ V8 /V10/ V11 /V15

Read more less

1. Input voltage: 5-36V (the input voltage above 6.5V is required for the on-board voltmeter to be effective)2. Output voltage: 1.25-32V continuously adjustable (for use as a step-down module, the input must be greater than the output by more than 2V)3. Output current: adjustable, up to 5A (recommended to be used within 4.5A, constant current needs to be output power above 2V to be adjustable, current adjustment will only work in constant current state)4. Output power: up to 75W (recommended to be used within 50W, please reduce the power when using a large pressure difference)5. Working frequency: 180KHZ6. Short circuit protection: yes7. Over-temperature protection: yes (automatically turn off the output after over-temperature)8. Wiring method: wiring terminal or welding terminal, V-IN is input, V-OUT is output9. Size: about 6.82x3.88x1.5cm10. Weight: about 73gFeatures:1. With crystal case, safe and practical, convenient and exquisite2. On-board voltage, current, power meter, simple and intuitive3. The onboard USB interface can easily charge digital products (note: the USB output voltage is the same as the module output voltage, not a fixed 5V output, please confirm before charging USB devices)4. High power, high efficiency, 5A, low ripple5. Can be used as an ordinary step-down module with overcurrent protection capability6. It can be used as a charger for various voltage values ​​of lithium batteries, batteries, silver-cadmium silver-hydrogen batteries (battery packs), and used in solar panels, wind turbines, etc.7. Used as a high-power LED constant current driver module8. There are two modes of constant voltage and constant current, and there are indicators to indicate which mode the module is currently in.9. When used as a lithium battery charger, you can set the floating charging voltage and charging current, and there is an indicator light to indicate whether it is charging or has been fully charged.10. With current limiting protection function, the module will not burn out even if the output is short-circuited11. The on-board voltage and ammeter can be self-calibrated12. It can display five states such as fixed input voltage, output voltage, power, current or turn display

Read more less

1. All copper plug, the contact point is not easy to heat2. The grid terminal is convenient for wiring, and the adjacent wires are not easy to be short-circuited3. Chip: TPA3116D2 (with AM interference function)4. Filter: LC filter (the sound is more round and clear after filtering)5. Adapter power supply: 5-27V (high voltage recommended for high power)6. Output power: 100Wx27. Adapter speaker: 50-300W, 4-8 ohms8. Number of channels: left and right dual channel (stereo)9. Bluetooth version: 5.010. Bluetooth transmission distance: about 15 meters (unblocked)11. Protection mechanism: overvoltage, undervoltage, overheating, DC detection, short circuit protection12. Power supply voltage:-12V: 8 ohm speaker/24W (left channel) +24W (right channel), 4 ohm speaker/40W+40W-15V: 8 ohms/36W+36W, 4 ohms/greater than 60W+60W-19V: 8 ohms/64W+64W, 4 ohms/greater than 92W+92W-24V: 8 ohms/76W+76W, 4 ohms/greater than 110W+110W13. Size: about 8.4x5.2x2.4cm14. Weight: about 130g15. Tips: only when the audio input is sufficient and the power supply/current is sufficient, there will be enough output power. If the power supply voltage is higher, the relative power will be higher. Speakers with different impedances will have different output powers. In the case of sufficient voltage and current, the larger the ohmic number of the speaker, the smaller the relative sound power

Read more less

1. Working voltage: 6-30V power supply2. Trigger signal source: high level trigger (3.0V-24V), low level trigger (0.0V-0.2V), switch control (passive switch)3. Output capability: it can control equipment within DC 30V10A or AC 220V5A4. Quiescent current: 15mA5. Working current: 50mA6. With optocoupler isolation, enhance anti-interference ability, industrial-grade circuit board, set parameters to be remembered after power off7. Timing range: 0.01s-9999min8. Weight: about 45g9. Size: about 7.1x3.9x2.5cmFeatures:1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical2. Support button trigger control, high and low level trigger, switch control, suitable for most occasions3. Wide voltage power supply (6-30V), easy to use4. Support UART data upload and parameter setting5. One-key pause function, with reverse connection protection, reverse connection will not burn6. Added sleep mode. after enabling, if there is no operation for about 5 minutes, the LCD backlight will be automatically turned off, and any key can be woken up.7. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately8. All setting parameters are automatically saved after power off

Read more less

1. Stereo audio, wide frequency response, high efficiency, low distortion and low noise, good sound effect2. There is a volume adjuster, easy to adjust the sound3. With power reverse connection protection, short circuit protection and overheat protection4. Wide supply voltage and two input modes, higher efficiency5. Material: PCB circuit board6. Power supply voltage: DC 5-24V7. Bluetooth version: 5.08. Transmission distance: about 15 meters (visible and unobstructed)9. Number of channels: two channels (stereo)10. Output power: 20Wx2 12V 4 ohms, 30Wx2 16V 4 ohms, 30Wx2 21V 8 ohms, 40Wx2 24V 8 ohms11. Adapter speaker (40-200W): 4 ohms (5-16V power supply), 8 ohms (5-24V power supply)12. Module protection mechanism: power reverse connection/short circuit/self-recovery overheating protection13. Size: about 5.08x3.8x1.815cmPrecautions:1. Keep a safe distance from the router to avoid wifi interference2. It is recommended to use 5-24V DC power supply voltage, higher than 26V chip will burn3. The power supply should be within 16V when connected to a 4-ohm speaker, and within 24V when connected to an 8-ohm speaker4. The power supply current is recommended to be more than 2A5. The speaker cable should not be too long, it is recommended to be within 1m6. Pay attention to electrostatic protection. Before touching the power amplifier board, you need to release the static electricity on your hands to avoid the breakdown of the chip by static electricity. The Bluetooth chip is more sensitive to static electricity.7. It is recommended that the rated power of the speaker is 40W and above to avoid the speaker being overheated and burned

Read more less

1. Input voltage: 2-24V2. Output voltage: 3-30V (note: the USB port is directly connected to the output port, which is an adjustable voltage port of 3-30V, not a 5V port. When connecting a 5V device, please confirm the output voltage of the USB port to avoid excessive voltage cause burnout of equipment)3. Input current: up to 15A4. Output current: up to 4A5. Output power: 3.7V input, up to 45W, 12V input, up to 80W6. Output ripple: two-stage filtering, low ripple output7. Input overcurrent protection: 15A fuse8. Input anti-reverse protection: high efficiency MOS type9. Input under-voltage protection: If you need to prevent the lithium battery from over-discharging, please weld a 5.6k resistor at R22 in the lower left corner of the module, work above 3.5V, stop below 3V10. Size: about 8x3.15x2.05cm11. Weight: about 36gFeatures:1. Special structure, support 2V low voltage input, no fear of low voltage, suitable for 18650 high-power boost2. High power, the input current can reach 15A, the output current can reach 4A, when 37V input, the output power can reach 45W, when 12V input, the output power can reach 80W3. Perfect protection mechanism, input reverse connection to prevent burning, input over-current protection, input under-voltage protection, output anti-backflow, constant voltage and constant current, can be directly connected to the battery for charging4. High efficiency, two-stage filtering, low ripple, reliable and stable performance

Read more less

1. Input voltage range: 6-40V2. Output voltage adjustment range: 0-32V (input must be greater than output)3. Output current adjustment range: 0-3A4. Input protection mode: reverse connection/overvoltage protection5. Output protection mode: (Ovp) overvoltage, (Ocp) overcurrent, (Opp) overpower6. Output power: 0-60W7. Output voltage setting resolution: 10mV8. Output current setting resolution: 1mA9. Output ripple: less than 100mVpp (input 35V, output 12V, current 2A)10. 100Hz fluctuation transmission ratio: less than 1/1000011. Storage operation: There are 10 groups of parameters stored in M0-M912. Cooling method: onboard radiator and cooling fan13. Cooling fan startup conditions: output current greater than 0.5A or output power greater than 25W14. Size: about 10.5x4.5x4.3 cm15. Weight: about 95gFeatures:1. Using a microprocessor, the output voltage and current can be accurately adjusted and displayed2. Adopt 1.8-inch color LCD display, which can display the working status of voltage, current, capacity, time and power supply in real time3. It is convenient and quick to adjust and read parameters through buttons and knobs, and it is convenient to save and recall parameters4. The output overvoltage (Ovp), overcurrent (Ocp), and overpower protection (Opp) can be set, and the output can be turned off when the output exceeds the set value5. The built-in cooling fan ensures that the power device will not be damaged due to overheating6. It can output constant voltage and constant current7. With input reverse connection protection function, it can prevent damage to the power supply due to input reverse connection

Read more less