Bestselling Products
Earpiece Speaker Sensor Flex Cable for iPhone 13 Pro Max
1. Earpiece speaker sensor flex cable replacement for iPhone 13 Pro Max 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts 6. Note: without earpiece
€8,53
Battery Back Cover for Sony Xperia 10 III(White)
1. Back cover replacement for Sony Xperia 10 III 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€12,22
Back Facing Camera for iPhone 13
1. Back facing camera for iPhone 13. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€21,54
SIM Card Tray for Sony Xperia XA2 Plus (Black)
1. SIM card tray for Sony Xperia XA2 Plus. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€11,03
Camera Lens Cover for Sony Xperia 1 II (Black)
1. Camera lens cover replacement for Sony Xperia 1 II. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
€6,85
10 PCS Front Housing Adhesive for Sony Xperia 10 III / Xperia 10 II
1. Replacement front housing adhesive for Sony Xperia 10 III / Xperia 10 II. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€10,58
10 PCS Back Housing Cover Adhesive for Sony Xperia 1
1. Replacement back housing cover adhesive for Sony Xperia 1. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€10,58
10 PCS Back Housing Cover Adhesive for Sony Xperia 1 II
1. Replacement back housing cover adhesive for Sony Xperia 1 II. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€10,45
Front Screen Outer Glass Lens for Xiaomi Mi 11 Ultra M2102K1G M2102K1C
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (touch screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement front screen outer glass lens for Xiaomi Mi 11 Ultra M2102K1G M2102K1C. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
€7,70
For Realme X3 / X3 SuperZoom RMX2142, RMX2081, RMX2085, RMX2083, RMX2086 Middle Frame Bezel Plate (Blue)
1. Original middle frame bezel replacement for Realme X3 / X3 SuperZoom RMX2142, RMX2081, RMX2085, RMX2083, RMX2086. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
€14,04
For OPPO Reno5 5G / Find X3 Lite PEGM00, PEGT00, CPH2145 Battery Back Cover (Orange)
1. Original back cover replacement for OPPO Reno5 5G / Find X3 Lite PEGM00, PEGT00, CPH2145 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€15,46
Front Housing LCD Frame Bezel Plate for Google Pixel 4a
1. Front housing LCD frame bezel plate replacement for Google Pixel 4a. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Make your device look more refreshing than ever 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone / mobile phone that you may cause during the changing of replacement parts.
€8,31
Battery Back Cover for Sony Xperia XZ2(Black)
1. Back cover replacement for Sony Xperia XZ2 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€21,00
100 Sets Motherboard Water Damage Warranty Indicator Stickers For iPhone 11 Pro & 11 Pro Max
1. Motherboard Water Damage Warranty Indicator Stickers for 11 Pro / 11 Pro Max. 2. Replace your broken or unusable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€5,67
Touch Panel for iPad Pro 12.9 inch (2017) A1670 A1671 A1821 (Black)
Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (touch screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement touch Panel for iPad Pro 12.9 inch (2017) A1670 A1671 A1821. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
€39,07
For Samsung Galaxy Tab S5e SM-T720 / SM-T725 Front Screen Outer Glass Lens with OCA Optically Clear Adhesive (Black)
About the product1. Replacement front screen outer glass lens with OCA optically clear adhesive for Samsung Galaxy Tab S5e SM-T720 / SM-T725. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
€8,04
€10,81
Fingerprint Sensor Flex Cable for Xiaomi Redmi Note 10 5G / Poco M3 Pro 5G / Redmi Note 10T 5G M2103K19G, M2103K19C(Black)
1. Fingerprint sensor flex cable for Xiaomi Redmi Note 10 5G / Poco M3 Pro 5G / Redmi Note 10T 5G M2103K19G, M2103K19C. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.
€9,70
Charging Port Board for Motorola Moto E6s (2020)
1. Charging port board replacement for Motorola Moto E6s (2020). 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
€9,68
OEM LCD Screen for Huawei Y Max with Digitizer Full Assembly
About the product1. Replacement LCD display + touch screen digitizer assembly for Huawei Y Max. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
€32,81
Front Screen Outer Glass Lens for Apple Watch Series 7 45mm
1. Replacement front screen outer glass lens for Apple Watch Series 7 45mm. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
€5,99
LCD Screen and Digitizer Full Assembly with Frame for Lenovo ideaPad Flex 5-14IIL05 5-14ARE05 5-14ITL05 5-14ALC05 80X1 81X2 82HS 82HU
About the product1. Replacement LCD display + touch screen digitizer assembly with frame for Lenovo ideaPad Flex 5-14IIL05 5-14ARE05 5-14ITL05 5-14ALC05 80X1 81X2 82HS 82HU. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in the device. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
€132,48
LCD Screen and Digitizer Full Assembly for Samsung Galaxy Tab S7 FE SM-T730 T736B
About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy Tab S7 FE SM-T730 T736B. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
€65,25
Charging Port Board for Honor 20 Pro / Honor 20
1. Charging port board replacement for Honor 20 Pro / Honor 20. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.
€8,83
For Samsung Galaxy S21 Ultra 5G Battery Back Cover with Camera Lens Cover (Grey)
1. Back cover replacement for Samsung Galaxy S21 Ultra 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€9,34
For Samsung Galaxy S21 Ultra 5G Battery Back Cover with Camera Lens Cover (Red)
1. Back cover replacement for Samsung Galaxy S21 Ultra 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€9,34
For GoPro HERO5 Front Cover Faceplate Frame Housing Repair Part(Black)
1. This front cover replacement is used to repair your scratched or broken Hero5 faceplate. 2. Compatible with GoPro Hero5 action camera. 3. Quality parts made to original standard, fit and compatible to your device well. 4. Light weight, and convenient to carry. 5. Note: Instruction is NOT included in the package, you are advised to get a professional technician to do the installation.
€13,75
PULUZ 45m Underwater Waterproof Housing Diving Case for GoPro MAX, with Buckle Basic Mount & Screw
Features1. Fully compatible with GoPro MAX action camera. 2. Durable and usable, anti-surf pressure will not damage its photographic effect. 3. Come with one standard screw and one thumbscrew, easy and convenient to install and use. 4. Protecting the tightness of the shell, not only better waterproof, but also more effective to prevent small dust into the camera. 5. 45 meters full body underwater waterproof design, ideal for diving, snorkeling, swimming and other water sport activities.Package List1. Waterproof Housing Case x 1 2. Base Adapter x 1 3. Long Screw x 1 4. Wrench x 1 5. Anti-Fog Inserts x 6 6. Color Package Box x 1
€47,44
PULUZ for GoPro HERO12 Black /11 Black /10 Black /9 Black Silicone Protective Case + POM Side Interface Cover with Wrist Strap & Lens Cover(Black)
Silicone Case1. High quality silicone cover, special design for GoPro Hero11 Black / HERO10 Black / HERO9 Black. 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast. 6. Not include the camera.Side Cover1. POM plastic replacement battery charging interface side cover 2. Durable material, premium craftsmanship 3. Specially designed for GoPro Hero11 Black / HERO10 Black / HERO9 Black action camera. 4. Replace your camera Interface side cover broken, damaged or cracked battery backing cover with new one 5. The camera shown in the picture is not included.Package List1. Silicone Case x 1 2. Strap Sling x 1 3. Lens Cover x 1 4. Lens Sling x 1 5. Side Interface Cover x 1
€7,90
Original for GoPro HERO5 Silicone Border Frame Mount Housing Protective Case Cover Shell(Orange)
1. High quality original camera frame case, specially designed for GoPro HERO5 sport camera. 2. Soft silicone material, protect your camera from dust, dirty, oil, and slipping. 3. Various bright colors for choice, you can choose your favorite color and keep it for a long time. 4. The camera, pedestal and screw shown in the picture are not included.
€6,39
Waterproof Protective Extended Backdoor Thicken Housing Case for Gopro Hero 3
About the product1. Easy and convenient to use 2. Fit For Gopro Hero 3 Camera only 4. High transparent materials keeps the original view of the camera
€8,55
Housing Shell CNC Aluminum Alloy Protective Cage with Insurance Back Cover for GoPro HERO5 Session /HERO4 Session /HERO Session(Black)
Features1. CNC aluminum alloy injection molded, stable not deformation, for aerial photography, you will not worry about the impact of the wind. 2. Prevent camera from crash caused by overheating 3. This case helps to reduce the amount of vignetting in the final image and to prevent scratching the lens by other things 4. A fixed seat, easy to install 5. Low-key and smooth frame design with compact camera fit installation Note: The camera is not includedPackage List1. Protective Cage x 1 2. Adapter Base x 1 3. Mounting Screws x 7 5. Screw Tool x 1
€17,46
PULUZ ABS Plastic Housing Shell Frame Mount Protective Case Cage with Pedestal and Long Screw for GoPro HERO(2018) /7 Black /6 /5
1. High quality camera frame case, specially suitable for GoPro NEW HERO /HERO6 /5 sport camera. 2. Solid ABS and plastic material, protect your camera from scratch and slipping. 3. Classical black for choice, you can choose it and keep it for a long time. 4. Equipped with pedestal and long screw. 5. The camera shown in the picture is not included.
€8,38
JSR KB Series ND16 Lens Filter for GoPro HERO10 Black / HERO9 Black
1. Protect your expensive lens from dust and scratch while not lowing your photo quality. 2. Significantly reduce lens flare and ghosting while making the filter anti-scratch, reduce reflection, increase surface durability, water resistant, oil & dust resistant. 3. ND filters washed out photos & video due to bright sunlight for better contrast & rich color. 4. Portable and durable, easy to install. 5. Lightweight, high transmittance and low reflectivity.
€16,43
JSR 58mm 16X Macro Lens + Red Diving Lens Filter with Lens Cover + Lens Filter Ring Adapter + String + Cleaning Cloth for GoPro HERO6 /5 Dive Housing
Features1. Made of high definition optical glass and metal material, durable to use. 2. 58mm high light-transmittance, you can capture more clearer and brighter picture under water. 3. 16X Macro lens, increase the magnification of the object, more suitable for shooting plants and flowers or small insects. 4. Comes with a standard ring adapter. 5. Compact, light and portable, ideal accessories for sports camera enthusiasts. 6. Red filter helps the camera capture vibrant tropical colors while filming in water. 7. Ideal for scuba diving, snorkeling, swimming and other water sport activities.Package List1. 58mm 16X Macro Lens x 1 2. Red Diving Lens Filter x 1 3. Lens Filter Ring Adapter x 1 4. Lens Cover x 1 5. String x 1 6. Cleaning Cloth x 1 7. Zipper bag x 1
€26,42
PULUZ 3-Way Grip Foldable Tripod Selfie-stick Extension Monopod for GoPro, Insta360 ONE R, DJI Osmo Action and Other Action Cameras, Length: 20-58cm
1. Made of high-quality ABS for greater strength and stability. 2. Three-section pole design for 3-way: Camera grip, foldable extension arm, and low angle shot stabilizer. 3. Foldable pole can be adjusted to different shapes for best shooting effects. 4. Portable and convenient to carry around, easily put it in your purses or pockets. 5. All in one tripod and hand grip for GoPro hero, compact cameras and cell phones. 6. Three functions: Perfect for shooting action sports footage from a fixed angle, but can also be used as a hand grip to shoot video or photos with your action camera, compact camera or smartphone or as a tripod. 7. Considerate design of the quick spin knob for fast and convenient mounting. 8. This ultra versatile mount can be used in three main ways: Can be as a camera grip, extension arm or tripod. 9. The folding arm is perfect for POV or follow-cam footage, and makes it easy to capture selfies without the mount. 10. When detached from the arm, the handle doubles as a camera grip. 11. Stored inside the handle is a lightweight and mini tripod that can be removed and used on its own or combined with the handle.
€9,27
Aluminium Alloy 360 Degree Rotating Mount Adapter Adjustable Arm Connector for GoPro Hero11 Black / HERO10 Black /9 Black /8 Black /7 /6 /5 /5 Session /4 Session /4 /3+ /3 /2 /1, DJI Osmo Action and Other Action Cameras(Black)
1. Material: Aluminum alloy2. Process: CNC machining, anodizing treatment3. Dimensions: 89 x 31.5 x 16mm4. Made of aluminum alloy, light weight, easy to carry, anodized, no color fading5. The universal metal adapter can be adjusted according to the angle you need without restriction6. The screw wrench can make disassembly and assembly easier and more convenient, and the lock is tighter and more compact and beautiful
€13,66
Floating Handle Grip with Tripod Holder & Adjustable Anti-lost Strap for GoPro Hero12 Black / Hero11 /10 /9 /8 /7 /6 /5, Insta360 Ace / Ace Pro, DJI Osmo Action 4 and Other Action Cameras
1. Float designed to keep your camera with a waterproof shell, dive housing and other parts of the case, easy to float in the water. 2. Adjustable wrist strap, so you have double protection. 3. Compact and small design which is easily for carrying when you go out. 4. Bring safety to your sport camera and enjoy recording the best moments you capture in or around the water. This floating hand grip will keep your sport camera afloat when plunged or submerged in the water. 5. Suitable for GoPro sport cameras. 6. Note: The sport camera, housings showing in picture are not included.
€11,17
PULUZ 53 in 1 Accessories Total Ultimate Combo Kits (Chest Strap + Suction Cup Mount + 3-Way Pivot Arms + J-Hook Buckle + Wrist Strap + Helmet Strap + Extendable Monopod + Surface Mounts + Tripod Adap ... ce Pro, DJI Osmo Action 4 and Other Action Cameras
Features1. Suitable for GoPro / Dazzne / SOOCOO camera (camera is not included) 2. Adjustable and compact design chest belt strap mount and head strap mount, made of superior plastic and nylon, specially designed for GoPro. 3. Extendable monopod is ideal for taking photos by yourself 4. Screws for fixing cameras to a bobber hand grip or J-Hook buckle 5. The adhesive mount is perfect for attaching the camera to a curved surface like a snowboarding, skydiving or skateboarding helmet 6. Float designed to keep your camera with a waterproof shell, dive Housing and other parts of the case, easy to float in the water 7. Floaty sponge is great for snorkeling, scuba diving, surfing, wakeboarding and any other deep water activity 8. Storage Bag is good shaped compartments for a camera, outer housing, and accessoriesPackage List1. Long screw x 2pcs + short screw x 2pcs 2. Handlebar Mount with screw 3. Suction Cup Mount with adapter & screw 4. Chest Strap 5. Wrist Strap mount 6. Wrist Strap for Wifi remote 7. 3-Way Pivot Arms with screws x 2pcs 8. J-Hook Buckles x 2pcs 9. Quick Release Buckles x 2pcs 10. Extendable Monopod with adapter 11. 360 degrees backpack quick release clip 12. Helmet Strap 13. Curved surface mounts x 2pcs + flat surface mounts x 2pcs + adhesive mount stickers x 4pcs 14. Adhesive mount stickers x 6pcs 15. Safety Tethers Strap with Sticker 16. Storage bag 17. Tripod Adapter x 2pcs 18. Bobber Hand Grip + Strap + screw 19. Plastic Wrench with strap 20. Anti-Fog Inserts x 2pcs 21. Head Strap 22. Floaty Sponge with Sticker
€17,92
Plastic Frame Mount Protective Case Cage with Tripod Base Adapter & Long Screw & Cold Shoe Base for Insta360 One R(Black)
1. Protective frame specially design for Insta 360 One R series camera. 2. Lightweight and portable, convenient to carry about. 3. Sleek frame design for low profile, compact mounting. 4. The simple but unique design makes it suitable to your camera. 5. Install a border, not to reflect camera sound recording and shooting speed. 6. The frame with cold shoe interface: Microphone and light can be attached to this frame, and the camera can be attached to monopods and other mounts more easily, and it can protect the camera as well 7. Please note that the camera shown on the picture is not included in this item.
€12,85
PULUZ Charging Box Silicone Protective Case for Insta360 GO 2(Black)
1. High quality silicone cover, special design for Insta360 GO 2 Charging Box. 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast.
€7,57
Gimbal Camera Ribbon Flex Cable for DJI Phantom 3 Standard
1. Replacement Parts for DJI Phantom 3 Standard Gimbal Camera. 2. The ribbon cable comes with adhesive on it already. 3. Thickness of the same cable as original ribbon cable. 4. Replace your broken or unusable item with a new one. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended.
€8,98
Gimbal Camera Ribbon Flex Cable for DJI Phantom 4 Pro
1. Gimbal Camera Ribbon Flex Cable Replacement for DJI Phantom 4 Pro. 2. The ribbon cable comes with the adhesive on it already. 3. Thickness of the same cable as original DJI ribbon cable. 4. Replace your broken or unusable item with a new one. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended.
€17,87
Signal Flex Cable for DJI Mavic Pro
1. Signal flex cable replacement for DJI Mavic Pro 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
€16,70
YELANGU A69 Lifting Handle Pot Handheld Stabilizer Extension Mount for DJI Ronin SC (Black)
1. Light weight, net weight 0.29kg. 2. Round corner design, protect user and stabilizer. 3. Silicone pad is designed in the clamping position to prevent the stabilizer from being pinched. 4. Designed with cold shoes on the top of the product, can be connected with other photographic equipment. 5. There have external connect holes, can be connected to a variety equipment to assist shooting.
€30,34
HD Drone CPL Lens Filter for DJI MAVIC Air
1. Great for portraiture and outdoor scenes in strong sunlight. 2. CPL filter provide color and contrast enhancement. 3. It removes glare from non-metallic surfaces, such as windows and water. 4. Portable and durable, easy to install. 5. Lightweight, high transmittance and low reflectance. 6. Note: Only include CPL Lens Filter.
€17,42
JSR Drone UV Lens Filter for DJI MAVIC 2 Pro
1. Protect your expensive lens from dust and scratch while not lowing your photo quality. 2. Reduce haze and improve contrast to your video and digital images by minimizing the amount of ultraviolet (UV) light. 3. Especially useful in areas of high altitude, snow, or beach, eliminating the undesirable blue cast. High level of transmittance. 4. Portable and durable, easy to install. 5. Lightweight, high transmittance and low reflectivity.
€14,13
RCSTQ Two-color Retractable Thumb Rocker Joystick for DJI FPV Combo Drone Remote Control
1. Aluminum alloy material, sturdy and durable 2. Process: Anodizing and coloring process to use 3. Ergonomic design, knurled anti-slip, comfortable 4. Stored in the remote control like the original joystick 5. Design for DJI FPV, quick disassembly and easy installation 6. Size: 2.4x0.9x0.9cm 7. Weight: 4.7g
€13,86