DJI Ronin Series
For DJI RS3 / RS3 Pro Explosion-proof Tempered Glass Screen Film
1. Ultra-thin and excellent flexibility, you do not have to worry about the device response speed will slow down after sticking the protective film. 2. High hardness: This toughened glass film has high hardness, so it can prevent itself from being scratched or broken. If it is damaged, the toughened glass will be broken into small pieces that are not sharp to ensure user safety. 3. High definition: This protective film has high light transmittance. With high light transmittance and low light reflectivity, the screen can still maintain high definition after using the protective film. 4. Function: The protective film can accurately fit your device screen, and can protect your device screen from scratches, fingerprints, water, oil, dust, vibration, sliding, etc. When it is contaminated by water, soil, oil or other attachments, it can be easily cleaned. 5. Smooth surface: Even the edge of the protective film is very smooth. 6. Convenient to use: It has super adhesion. Before sticking the protective film, all you need to do is to clean the screen thoroughly. 7. Durable: With good performance, it can be used for a long time. Installation notes: 1. Please use alcohol swabs and microfiber cloth to clean the screen of the device before installation. 2. Peel off the protective layer on the adhesive side. 3. Carefully align the glass film with the screen. 4. Press the center of the glass film and the adhesive part will spread out smoothly. Reminder: 1. Since this is a glass product, please note that the edge of the glass is a fragile area. 2. When disassembled and reused, the sticking performance may be reduced, and it can no longer stick to the equipment. Therefore, it is recommended not to reuse the protective film. 3. Excessive force when installing or removing the screen protector may damage the product.Specification: General Compatible with DJI: RS 3 Pro , RS 3 Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 7.5cm * 1cm / 3.94inch * 2.95inch * 0.39inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 42cm * 32cm * 27cm / 16.54inch * 12.6inch * 10.63inch Loading Container 20GP: 734 cartons * 500 pcs = 367000 pcs 40HQ: 1705 cartons * 500 pcs = 852500 pcs
€5,63
Original Three-section Phone Clip for DJI RS 3 Mini/DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 2
1. For DJI RS 3 Mini/DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. Clamp and fix the mobile phone, three-stage design3. Comes with NATO interface, cold shoe and 1/4-20 threaded interface4. When you need to install the mobile phone on the side of the stabilizer to monitor the image screen, you can use the mobile phone clip to fix the mobile phone5. It can be rotated horizontally and vertically to meet the different needs of mobile phone horizontal and vertical screen monitoringPacking list:- Phone clip x 1Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.18kgs / 0.40lb One Package Size 10cm * 10cm * 6cm / 3.94inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 19.00kgs / 41.89lb Carton Size 52cm * 42cm * 32cm / 20.47inch * 16.54inch * 12.6inch Loading Container 20GP: 381 cartons * 100 pcs = 38100 pcs 40HQ: 885 cartons * 100 pcs = 88500 pcs
€69,17
Original Multifunctional Focus Motor + Mounting Kit For DJI RS 3 Pro
1. The torque is increased by 3 times, and the noise is reduced by 50%. 2. The mounting components adopt a quick release structure, making the focus more efficient and reliable 3.MAX torque: 1.0 N m (8V) 4.MAX speed: 180 rpm (8V) 5. Quiescent current: 50mA (5V) 6. Stall current: 2.8A (8V) 7. Working voltage: 6-17.6V 8. Noise: 45 decibels 9. Number of gear teeth: 30 10. Modulus: 0.8 11. Working environment temperature: minus 20-45 degrees Celsius 12. Mounting conduit: 12 mm 13. Dimensions: 8 x 5 x 3.6 cm 14. Weight: 108 grams 15. Compatible products: For DJI RS 3 Pro, RS3, RS2, RSC 2 Packing list: 1. Follow focus motor (2022) x 1 2. Installation component set x 1 3. Follow focus rack x 1 4. Camera control cable (USB-C, 30cm) x 1 5. M4 screws (10 mm) x 4 6. Wrench (3 mm) x 1 7. Lens fixing strap x 1Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.26kgs / 0.57lb One Package Size 14cm * 10cm * 5cm / 5.51inch * 3.94inch * 1.97inch Qty per Carton 146 Carton Weight 46.28kgs / 102.03lb Carton Size 60cm * 60cm * 64.3cm / 23.62inch * 23.62inch * 25.31inch Loading Container 20GP: 115 cartons * 146 pcs = 16790 pcs 40HQ: 267 cartons * 146 pcs = 38982 pcs
€259,67
Original Long-Distance Monitoring Intelligent Follow Image Transmitter for DJI RS 2 (Black)
1. Through the Ronin image transmission, the following functions can be realized: smart follow 3.0, mobile phone somatosensory control, virtual joystick control gimbal, manual focus, adjust gimbal parameters, adjust camera exposure parameters, etc. 2. Connect the camera to the Ronin video transmission via an HDMI cable, and connect the mobile phone to the Ronin video transmission via Wi-Fi, and then you can view the camera shooting screen on the Ronin app 3. When RS 2 or RS 3 Pro is used with Ronin video transmission, you can also view the camera shooting screen on the screen of the gimbal body 4. Note: When theRS 3 or RSC 2 is used with the Ronin video transmission, the screen of the gimbal body does not support viewing the camera shooting screen, you can view it through the Ronin app 5. Working frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz 6. Transmission power (EIRP): 2.400-2.4835 GHz: <25 dBm (FCC) <20 dBm (CE/SRRC/MIC); 5.725-5.850 GHz: <25 dBm (FCC/SRRC), <14dBm (CE) 7. Dimensions: 8.2 x 6.3 x 2.4 cm 8. Weight: 126 grams 9. Compatible products: DJI RS 3 Pro, DJI RS 3, DJI RS 2, DJI RSC 2 Packing list: 1. Video Transmitter x 1 2. Cold shoe to 1/4-20 screw hole adapter x 1 3. USB-C cable (40cm) x 1 4. USB-C to USB-C cable (20 cm) x 1 5. USB-C port to A port HDMI cable (20 cm) x 1 6. USB-C port to C port HDMI cable (20 cm) x 1 7. USB-C port to D port HDMI cable (20 cm) x 1 8. M4 screw (10 mm) x 2 9. Wrench (3 mm) x 1Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 162 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 162 pcs = 28674 pcs 40HQ: 412 cartons * 162 pcs = 66744 pcs
€323,68
Original Handheld Adapter Handle For DJI RS 3 / RS 3 Pro / RS 2 / RSC 2 (Black)
1. Lighter weight, smaller storage size and a carry handle for tool-free mounting to the NATO port2. Handle with its own cool shoe and 1/4 expansion port for external monitor support and low angle shooting3. Compatible with DJI RS 3 / RS 3 Pro / RS 2 / RSC 24. Storage size: 192x40x64mm5. Weight: 210gSpecification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 21cm * 6cm * 8cm / 8.27inch * 2.36inch * 3.15inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs 40HQ: 412 cartons * 98 pcs = 40376 pcs
€102,26
Original Image Transmitter for DJI Ronin 4D
1. Adopt O3 Pro technology, with 6km long-range transmission distance at the ground end2. Add DFS band to the original 2.4GHz and 5.8GHz bands, support AES 256-bit encryption algorithm, can output 1080p/60fps full HD images to multiple map transmitter highlight monitors at the same time, security, stability and anti-interference ability are greatly improved3. DJI Ronin 4D transmitter needs to be used with DJI highlight monitor.4. Applicable products: DJI Ronin 4D5. Features:- 6km long-distance transmission- Low latency experience- Remote control- All-in-one designPacking list:- Fuselage map transmitter x 1- Ronin antenna x 4- 3mm ball-head hexagonal wrench x 1- M4-19 hexagon socket head screws x 3Specification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 15cm * 10cm * 5cm / 5.91inch * 3.94inch * 1.97inch Qty per Carton 162 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 162 pcs = 28674 pcs 40HQ: 412 cartons * 162 pcs = 66744 pcs
€635,14
Original BG30 Battery Grip For DJI RS 3 Pro / RS 2 (Black)
1. It can provide continuous power supply to the head for about 12 hours2. Support PD and QC 2.0 fast charge, in 24W charging specifications, 1.5 hours can be filled3. The hand-held battery is equipped with a charging port to support independent charging4. It adopts clip-type disassembly design and handle lock lever/disassembly button design, supporting double safety to prevent escape5. Model: BG30-1950 mAh-15.4 V6. Type: Lipo 4s7. Capacity: 1950 mAh8. Energy: 30.03 Wh9. Voltage: 12v-17.6 V10. Charging input voltage: 5V/2A, 9V/2a, 12V/2A, 5V/1.6A11. Suitable for DJI Rs 3pro/RS 2Specification: General Compatible with DJI: RS 3 Pro , RS 2 Package Weight One Package Weight 0.34kgs / 0.74lb One Package Size 20cm * 10cm * 10cm / 7.87inch * 3.94inch * 3.94inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs 40HQ: 412 cartons * 74 pcs = 30488 pcs
€195,65
Original PROSSD Card Compartment for DJI Ronin 4D Accessories
1. Screw fixed, stable and not easy to fall2. With installation tool, easy to use and fast installation3. Purpose: to mount DJI PROSSD 1TB external SSD to DJI Ronin 4D body to record 8K video4. Packing list: PROSSD card compartment x 1, M2-20 cup head hexagonal screws x 2, 1.5mm ball head hexagonal wrench x 15. Compatible products: DJI Ronin 4DSpecification: Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 15cm * 10cm * 3cm / 5.91inch * 3.94inch * 1.18inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs 40HQ: 412 cartons * 194 pcs = 79928 pcs
€323,68
Original Follow Focuser Motor Mounting Kit for DJI Ronin SC
1. Easy to use, easy to install2. Made of high quality material, sturdy and durable3. With the focuser motor mounting kit, the focuser motor can be mounted on the Ronin SC4. Compatible products: DJI Ronin SC5. Packing list:- Fixing kit x 1- 12mm tube x 1- M4 screws x 4- Ronin SC RSS one split two cable x 1Specification: General Compatible with DJI: RONIN-SC Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 20cm * 15cm * 4cm / 7.87inch * 5.91inch * 1.57inch Qty per Carton 98 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 98 pcs = 17346 pcs 40HQ: 412 cartons * 98 pcs = 40376 pcs
€69,17
Original Roll Axis Counterweight Set For DJI RS 2 / RSC 2 / RS 3
1. Compatible products: For DJI RS 2, DJI RSC 2, DJI RS 3 2. Provide counterweight for the situation where the roll axis cannot be leveled 3. Mainly for machines whose roll axis may not be directly leveled, such as BMPCC 4K/6K+, etc. 4. Two kinds of gram weight counterweights, you can counterweight according to your needs Packing list: 1. Pitch motor weight clamp x 1 2. 200g counterweight x 2 3. 100g counterweight x 2Specification: General Compatible with DJI: RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.65kgs / 1.44lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 46 Carton Weight 30.00kgs / 66.14lb Carton Size 42cm * 35cm * 14cm / 16.54inch * 13.78inch * 5.51inch Loading Container 20GP: 1295 cartons * 46 pcs = 59570 pcs 40HQ: 3008 cartons * 46 pcs = 138368 pcs
€132,81
Original External GPS Module Adapter Cable for DJI RS 3 Pro / RS 2
1. The module cable can connect the Ronin-S external GPS module to RS 2 / RS 3 Pro 2. Improve the stability of the gimbal during rapid acceleration, reduce the impact of acceleration on the sensor, and avoid image distortion 3. Compatible products: For DJI RS 3 Pro, DJI RS 2 4. Reminder: The Ronin-S external GPS module is not included in the module connection cable and needs to be purchased separately! Packing list: Module cable x 1Specification: General Compatible with DJI: RS 3 Pro , RS 2 Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 15cm * 3cm * 2cm / 5.91inch * 1.18inch * 0.79inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs 40HQ: 562 cartons * 500 pcs = 281000 pcs
€69,17
Original Camera Handle Extension Handheld Adapter for DJI RS 2
1. The portable adapter can be used with the DJI R handle extension tripod, which can quickly realize the shooting in portable mode2. Adopt NATO quick-release design, easy to disassemble and assemble, compact and easy to store3. Dimensions: 180 x 60 x 30mm4. Weight: 150 grams5. Compatible products: DJI RS 3, DJI RS 3 Pro, DJI RS 2, DJI RSC 2Packing list:Portable adapter x 1Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 20cm * 6cm * 4cm / 7.87inch * 2.36inch * 1.57inch Qty per Carton 500 Carton Weight 11.00kgs / 24.25lb Carton Size 30cm * 50cm * 36.7cm / 11.81inch * 19.69inch * 14.45inch Loading Container 20GP: 484 cartons * 500 pcs = 242000 pcs 40HQ: 1124 cartons * 500 pcs = 562000 pcs
€69,17
Original Remote Control And Powered Vehicle Expansion Base Kit for DJI RS 2 / RS 3 Pro
1. Compatible products: For DJI RS 2, RS 3 Pro 2. Through the control handle, the gimbal can be controlled by wire to realize long-distance follow focus, video recording, joystick and other control functions 3. Remote power supply can be realized through the gimbal power supply adapter and battery power adapter with the handle battery 4. Through this combination, can be better suitable for shooting scenes such as vehicles, slide rails, ropeways, and rockers Packing list: 1. Control handle x 1 2. Gimbal power adapter x 1 3. Bottom plate x 1 4. 1/4-20 screw x 5 5. Wrench (4 mm) x 1 6. Wrench (2.5 mm) x 1 7. Battery Power Adapter x 1 8. Control wire (30 cm) x 1 9. Control wire (5m) x 2 10. Control handle communication interface adapter x 1 11. Strengthening rod x 1 12. Safety Buckle x 1Specification: General Compatible with DJI: RS 3 Pro Package Weight One Package Weight 1.60kgs / 3.52lb One Package Size 36cm * 26cm * 7cm / 14.17inch * 10.24inch * 2.76inch Qty per Carton 4 Carton Weight 2.70kgs / 5.95lb Carton Size 38cm * 28cm * 30cm / 14.96inch * 11.02inch * 11.81inch Loading Container 20GP: 835 cartons * 4 pcs = 3340 pcs 40HQ: 1939 cartons * 4 pcs = 7756 pcs
€952,49
Original Vehicle / Rocker Remote Control Handle for DJI RS 2 / RS 3 Pro
1. Compatible products: For DJI RS 2, DJI RS 3 Pro 2. Cooperate with multi-form dual-hand-held, in the dual-hand-held mode, a series of operations such as dormancy, video recording, and focus can be realized on the control handle held 3. In the case of long-distance control, such as vehicle, rocker, etc., it can be controlled by wire (wire control distance is 5 meters, you need to purchase the Ronin Vehicle Extension Kit to obtain a 5-meter control cable) 4. The control handle is equipped with a NATO interface and a cold shoe interface, and the image transmission monitor can be installed on the handle; a focus wheel can also be installed on the side of the handle to realize the corresponding function Packing list: 1. Control handle x 1 2. Control handle communication interface adapter x 1 3. Control wire (30 cm) x 1Specification: General Compatible with DJI: RS 3 Pro , RS 2 Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 12cm * 10cm * 4cm / 4.72inch * 3.94inch * 1.57inch Qty per Carton 208 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 208 pcs = 36816 pcs 40HQ: 412 cartons * 208 pcs = 85696 pcs
€635,14
Original Type-C / USB-C L-shaped Camera Control Cable For DJI RS 3 Mini, 30cm
1. Compatible products: For DJI RS 2, RSC 2, RS 3, RS 3 Pro, RS 3 Mini 2. Use the elbow end to connect the camera. When the gimbal rotates, the camera control line and the gimbal will not interfere with each other, thus avoiding damage to the camera and control line 3. Specifications: Type-C / USB-C to Type-C / USB-C 4. Length: 30cm 5. Reminder: It is recommended to use the elbow end to connect the camera 6. Packing list: USB-C elbow control cable x 1Specification: General Compatible with DJI: RS 3 Mini , RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 500 Carton Weight 13.50kgs / 29.76lb Carton Size 50cm * 50cm * 44cm / 19.69inch * 19.69inch * 17.32inch Loading Container 20GP: 242 cartons * 500 pcs = 121000 pcs 40HQ: 562 cartons * 500 pcs = 281000 pcs
€31,04
Original Controller Interface Multifunctional Adapter For DJI Ronin 4D
1. Installation method: quick release2. For DJI Ronin 4D3. Installed at the interface of the Ronin 4D control handle4. It can be used to transfer GPS modules and other accessories5. Solve the problem of horizontal skew of Ronin 4D during high-speed sports such as car shooting6. Weight: about 474 gramspacking list:- Control handle interface multi-function adapter x 1Specification: General Compatible with DJI: Ronin 4D Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 10cm * 10cm * 8cm / 3.94inch * 3.94inch * 3.15inch Qty per Carton 60 Carton Weight 4.38kgs / 9.66lb Carton Size 39cm * 39cm * 31cm / 15.35inch * 15.35inch * 12.2inch Loading Container 20GP: 565 cartons * 60 pcs = 33900 pcs 40HQ: 1312 cartons * 60 pcs = 78720 pcs
€132,73
Original Multi-Mode Dual Handheld Kit For DJI R
1. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. Equipped with a NATO interface, it supports quick disassembly and assembly, and can hold the gimbal with both hands for shooting3. In the two-handed mode, the low-angle handheld mode can be quickly switched without disassembly, and different usage modes can be selected according to actual needs4. The left and right rails are equipped with 3/8 threaded interface, 1/4-20 threaded interface and cold shoe interface, which support the installation of accessories with corresponding interfaces5. After replacing the mechanical handle on one side with a control handle and connecting a short control cable, a series of operations such as sleep, video, joystick, and focus can be realized on the handlePacking list:- Left crossbar x 1- Right crossbar x 1- Handle grip x 2Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 23cm * 10cm * 10cm / 9.06inch * 3.94inch * 3.94inch Qty per Carton 74 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 74 pcs = 13098 pcs 40HQ: 412 cartons * 74 pcs = 30488 pcs
€228,52
Original Lower Quick Release Plate For DJI R
1. Material: aluminum alloy2. For DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 23. One-piece body design4. CNC processing, surface anodic anti-oxidation treatment5. Durable and convenientpacking list:Lower quick release plate x 1Specification: General Compatible with DJI: RS 3 Pro , RS 3 , RSC 2 , RS 2 Package Weight One Package Weight 0.11kgs / 0.24lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 356 Carton Weight 37.38kgs / 82.41lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 356 pcs = 63012 pcs 40HQ: 412 cartons * 356 pcs = 146672 pcs
€59,49
For DJI RS3 Mini Sunnylife RO-GS560 Lanyard Handheld Gimbal Double Buckle Comfortable Shoulder Strap Accessories(Black)
1. Compatible with DJI RS 3 Mini2. CNC finishing metal fixing ring, high strength, high hardness and durability3. Double hanging buckles ensure the balance of force at the joint and improve stability4. Soft and comfortable shoulder strap, decompression and breathable, quick release and quick assembly5. Big head metal hook, strong load-bearing capacity6. The length of the shoulder strap is adjustable, and the length range of folding in half: 55.5-76.5cm, suitable for users of different heights7. The inner wall of the fixed ring is non-slip soft pad, soft and scratch-resistant, increasing friction to lock the body firmly8. Soft and breathable, thick mesh fabric inside9. Tough and durable, tight nylon webbing10. High-strength tensile, precision stitching + hemming11. Load bearing: 2-5 kg12. Material: cloth + nylon webbing + leather + metal13. Size: 14x8x6cm14. Net weight: 177g (including fixing ring)15. Gross weight: 202gPacking list:-1 x wrench-1 x shoulder strap-1 x retaining ring-2 x screwsSpecification: General Compatible with DJI: RS 3 Mini Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 15cm * 8cm * 7cm / 5.91inch * 3.15inch * 2.76inch Qty per Carton 140 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 140 pcs = 24780 pcs 40HQ: 412 cartons * 140 pcs = 57680 pcs
€31,04
For DJI RS 3 Mini Sunnylife RO-B555 Storage Bag Handheld Stabilizer Suitcase Protective Bag(Black)
1. The large-capacity suit bag can store gimbal, tripod, quick release plate, MIC charging box, MIC receiver and transmitter, as well as data cables, mobile phone connectors, Mic windproof fleece and other small accessories2. Precise mold opening, stable storage of machines and accessories, shock absorption and drop resistance, meticulous care3. It can be carried on one shoulder, and the length of the shoulder strap can be adjusted freely4. Reasonable partition, a full set of storage5. The shock-absorbing and pressure-resistant shell can effectively relieve external impact and provide effective protection for the fuselage6. The liner is made of soft fabric to prevent scratches7. Exquisite and smooth zipper, rigorous stitching8. Durable handle, easy to carry without tired hands9. Applicable models: suitable for DJI RS 3 Mini10. Material: fabric + fabric lining11. Dimensions: 310 x 226 x 108mm12. Net weight: 653g13. Gross weight: 759gSpecification: General Compatible with DJI: RS 3 Mini Package Weight One Package Weight 0.83kgs / 1.82lb One Package Size 32cm * 23cm * 11cm / 12.6inch * 9.06inch * 4.33inch Qty per Carton 38 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 38 pcs = 6726 pcs 40HQ: 412 cartons * 38 pcs = 15656 pcs
€34,52
Original DL PZ 17-28mm T3.0 ASPH Lens For DJI Ronin 4D
1. DL PZ 17-28mm T3.0 ASPH is DJIs first motorized zoom lens, covering a 17 mm ultra-wide-angle focal length to a 28 mm wide-angle focal length. After the lens is installed, it can directly realize precise focus and zoom operations without calibration, satisfying professional creations wide-angle shooting needs.2. High resolution from the center of the screen to the corners: The ultra-high resolution from the center to the edge can fully meet the image quality requirements of 8K sensors. It has very sharp picture quality performance and excellent optical quality.3. The minimum focusing distance of 0.19 meters meets most of the needs of close-up shooting in ultra-wide-angle situations.4. Thanks to the aluminum-magnesium alloy body design, it achieves an ultra-light weight of 520 grams. While ensuring the rigidity and strength of the lens, it effectively reduces the weight of the lens.5. With a built-in servo zoom motor, no additional motor is required, and the zoom effect can be easily realized. The servo motor package is not detachable, light and compact.6. No leveling during the zooming process: When the lens is zooming, the displacement of the inner lens barrel of the lens does not exceed 5 mm. Using it with Ronin 4D can completely avoid the need for leveling after zooming.7. Compatible products: suitable for DJI Ronin 4D-6K / DJI Ronin 4D-8KTechnical Parameters:1. Image size: full frame (36 mm×24 mm)2. Focal length: 17 mm to 28 mm3. Minimum focusing distance (MOD):- Focal length 17 mm: 0.19 meters- Focal length 28 mm: 0.26 meters4. Aperture: T3.0 to T225. Filter diameter: 67mm in diameter6. Mount type: DL mount7. Weight (including lens hood): Approx. 520g8. Working temperature: -10 to 55 degrees Celsiuspacking list:Lens front protective cap × 1Hood × 1Lens ×1Lens rear protective cover × 1Specification: General Compatible with DJI: Ronin 4D Package Weight One Package Weight 0.60kgs / 1.33lb One Package Size 20cm * 17cm * 8cm / 7.87inch * 6.69inch * 3.15inch Qty per Carton 50 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 50 pcs = 8850 pcs 40HQ: 412 cartons * 50 pcs = 20600 pcs
€3.157,93
Original Expansion Plate for DJI Ronin 4D, Use For SDI / XLR / TC Interfaces
1. Mounted on the back of the Ronin 4D, it is used to expand the timecode interface, SDI output interface and XLR audio input interface2. When using with the Ronin 4D transmitter, you need to install the Ronin 4D body expansion board first, and then install the Ronin 4D transmitter3. Easy to install, easy to use4. Packing list: fuselage expansion board x 15. Adaptable products: DJI Ronin 4D-6K, Ronin 4D-8KSpecification: General Compatible with DJI: Ronin 4D Package Weight One Package Weight 0.46kgs / 1.01lb One Package Size 15cm * 12cm * 6cm / 5.91inch * 4.72inch * 2.36inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 60cm * 48cm * 24cm / 23.62inch * 18.9inch * 9.45inch Loading Container 20GP: 385 cartons * 66 pcs = 25410 pcs 40HQ: 895 cartons * 66 pcs = 59070 pcs
€1.050,40
Original Flex for DJI Ronin 4D
1. Split design of head camera: support multi-form split expansion, not only reduce the weight of the handheld, and shooting more freely, while providing more diversified lens options2. Non-destructive transmission of high-speed image signals: the extension cable uses extremely thin coaxial cable, which can non-destructively transmit 8K high-speed signals captured by the X9 head camera sensor, integrated with a complete signal transmission function3. 2m gimbal camera extension cable: dramatically increase the flexibility of the camera setup, in the car, cabin and other very small space of the shuttle and transport the lens is no longer tricky, so that the gimbal camera can be used as a small movie-grade remote control head, bringing a wealth of creative space4. Quickly switch forms on set: the split form can be quickly switched on set without the need for installation tools, easily realizing multi-purpose, further improving shooting efficiency5. Support 4D control handle and monitor: adapted 4D control handle and body monitor, can be built into a small and powerful one-man shooting system, support full body control6. Handheld weight is reduced to about 1.8kg, about 34% of the weight of the whole camera, which is conducive to long-time handheld shooting, and is quite advantageous in mobile shooting scenarios, such as documentaries, interviews or events7. Adaptable products: DJI Ronin 4D8. Packing list:- Ronin 4D Flex x 1- Pan axis locking kit x 1- Ronin 4D control grip adapter module x 2- Control grip adapter module cable x 2Specification: General Compatible with DJI: Ronin 4D Package Weight One Package Weight 1.67kgs / 3.69lb One Package Size 33cm * 32cm * 14cm / 12.99inch * 12.6inch * 5.51inch Qty per Carton 3 Carton Weight 6.00kgs / 13.23lb Carton Size 44cm * 35cm * 34cm / 17.32inch * 13.78inch * 13.39inch Loading Container 20GP: 509 cartons * 3 pcs = 1527 pcs 40HQ: 1182 cartons * 3 pcs = 3546 pcs
€1.589,28
For DJI RS3 Mini/RS3 PGYTECH Quick Release Plate Gimbal Base(P-RH-167)
1. Main material: aluminum alloy2. Two interfaces, compatible with different gimbal models3. It is more efficient to install the quick release plate in one step, and the second lock design is more secure and compatible with the Aka interface4. The side port is suitable for DJI RS 3 Pro, DJI RS 3, DJI RS 2, DJI RSC 25. The bottom interface is suitable for DJI RS 3 Mini6. It can replace original quick-installation system to realize the efficient connection between the camera and the gimbal, tripod, slide rail and other equipment7. The quick-release plate adopts anti-loosening screw design, and the screw and the camera are always in a relatively static state even under stress, which eliminates the problem of easy loosening of the traditional quick-release plate8. The quick mount is made of aluminum alloy as a whole, which is safe, stable, light, strong and durable9. Weight: 72 grams10. Dimensions: 5.5x3.8x1.75mmSpecification: General Compatible with DJI: RS 3 Mini , RS 3 Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 242 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 242 pcs = 42834 pcs 40HQ: 412 cartons * 242 pcs = 99704 pcs
€85,57
Original Video Receiver For DJI 20,000ft 1080p/60fps Transmission
1. Long-Distance HD Live Feed:Incorporates O3 Pro video transmission technology that offers an incredible 20,000ft transmission distance at 1080p/60fps.2. Unlimited Number of Receivers:Broadcast mode allows an unlimited number of receivers, convenient for real-time monitoring by multiple teams for enhanced efficiency.3. Triple-Band Seamless Auto Hopping:Supports triple-band automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS for optimal wireless channel use.4. End-to-End Ultra-Low Latency:Use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency.5. Remote Gimbal/Focus/Camera Control:When used with Ronin 4D Hand Grips or DJI Master Wheels, you can remotely control Ronin 2, RS 3 Pro, focus, and camera functions.6. Independent Recording and Playback:1080p/60fps H.264 footage can be independently recorded and stored on a microSD card, making it easy to edit samples right on set.Specification:1. Weight: Image transmission receiver is about 350 grams (excluding antenna)2. Dimensions: 127 mm long, 87 mm wide, 26 mm high (excluding antenna)3. Power consumption: 9W4. Power supply voltage: 6-18V5. Input audio format: SDI embedded, HDMI embedded6. Output audio format: PCM7. Image transmission solution: O3 Pro8. Image transmission delay: 70 milliseconds (measured under 1080p/60fps recording specifications.)Packing list:DJI Video Receiver × 1WB37 battery adapter × 1NP-F battery adapter × 1DC to P-TAP power cable × 1SDI cable × 1USB-C cable (40 cm) × 1Ronin video transmission antenna × 2Installation tool kit × 1Specification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 60 Carton Weight 23.90kgs / 52.69lb Carton Size 34cm * 32cm * 42cm / 13.39inch * 12.6inch * 16.54inch Loading Container 20GP: 583 cartons * 60 pcs = 34980 pcs 40HQ: 1354 cartons * 60 pcs = 81240 pcs
€2.541,89
Original 1,500-Nit High-Bright Remote Monitor For DJI
Features:1. Mirror control mode2. 1500 nits high brightness monitor3. HDMI and SDI dual signal output4. Independent recording and playback5. Remote parameter adjustment and remote controlSpecification:1. Weight: The image transmission highlight monitor is about 727 grams (excluding antenna)2. Dimensions: 213 mm long, 135 mm wide, 51 mm high (excluding antenna)3. Battery life: 2 hoursWorking frequency:When using the image transmission transmitter with an image transmission highlight monitor:Non-DFS bands:2.400 GHz to 2.484 GHz5.150 GHz to 5.250 GHz5.725 GHz to 5.850 GHzDFS band:5.250 GHz to 5.350 GHz5.470 GHz to 5.600 GHz5.650 GHz to 5.725 GHzPacking list:Image transmission highlight monitor × 1Image transmission monitor hood × 1NP-F battery adapter board (RX) × 1WB37 smart battery × 1WB37 Charging Manager (USB-C) × 11.5mm ball head hex wrench × 1Specification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 24cm * 15cm * 8cm / 9.45inch * 5.91inch * 3.15inch Qty per Carton 16 Carton Weight 13.90kgs / 30.64lb Carton Size 50cm * 32cm * 34cm / 19.69inch * 12.6inch * 13.39inch Loading Container 20GP: 490 cartons * 16 pcs = 7840 pcs 40HQ: 1137 cartons * 16 pcs = 18192 pcs
€2.528,25
Original Video Transmitter For DJI 20,000ft 1080p/60fps Transmission
1. Long-Distance HD Live Feed:Incorporates O3 Pro video transmission technology that offers an incredible 20,000ft transmission distance at 1080p/60fps.2. Unlimited Number of Receivers:Broadcast mode allows an unlimited number of receivers, convenient for real-time monitoring by multiple teams for enhanced efficiency.3. Triple-Band Seamless Auto Hopping:Supports triple-band automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS for optimal wireless channel use.4. End-to-End Ultra-Low Latency:Use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency.5. Remote Gimbal/Focus/Camera Control:When used with Ronin 4D Hand Grips or DJI Master Wheels, you can remotely control Ronin 2, RS 3 Pro, focus, and camera functions.6. Independent Recording and Playback:1080p/60fps H.264 footage can be independently recorded and stored on a microSD card, making it easy to edit samples right on set.Specification:1. Weight: Image transmission transmitter is about 350 grams (excluding antenna)2. Dimensions: 127 mm long, 87 mm wide, 26 mm high (excluding antenna)3. Power consumption: 11W4. Power supply voltage: 6-18V5. Input audio format: SDI embedded, HD-MI embedded6. Output audio format: PCM7. Image transmission solution: O3 Pro8. Image transmission delay: 70 milliseconds (measured under 1080p/60fps recording specifications.)Packing list:DJI video transmitter × 1WB37 battery adapter board (TX) × 1NP-F battery adapter board × 1Ronin image transmission antenna × 2USB-C cable (40 cm) × 1SDI cable × 1DC power cord × 1DC to P-TAP power supply cable × 1USB-C image transmission cable × 1RS pan/tilt mounting plate × 1Installation tool kit × 1Specification: Package Weight One Package Weight 0.38kgs / 0.85lb One Package Size 16cm * 10cm * 4cm / 6.3inch * 3.94inch * 1.57inch Qty per Carton 60 Carton Weight 23.90kgs / 52.69lb Carton Size 34cm * 34cm * 42cm / 13.39inch * 13.39inch * 16.54inch Loading Container 20GP: 549 cartons * 60 pcs = 32940 pcs 40HQ: 1275 cartons * 60 pcs = 76500 pcs
€1.906,89
Original Expansion Base Kit for DJI RS 2 / RS 3 Pro
1. Control handle can be wired to control the PTZ to realize long-distance focusing, video recording, joystick and other control functions.2. Remote power supply can be realized through the head power supply adapter and battery power supply adapter with the handle battery.3. It is more suitable for car, rail, ropeway, jib and other shooting scenes4. Adaptable products: for DJI RS 2 / RS 3 Pro5. Packing list:- Head power adapter × 1- Base plate x 1- 1/4 inch-20 screws x 5- Battery adapter x 1- Control cable (30 cm) x 1- Control cable (5m) x 2- Control handle x 1- Control handle communication interface adapter x 1- Wrench (4 mm) x 1- Safety catch x 1- Wrench (2.5 mm) x 1- Reinforcement bar x 1Specification: General Compatible with DJI: RS 3 Pro , RS 2 Package Weight One Package Weight 0.35kgs / 0.78lb One Package Size 15cm * 12cm * 5cm / 5.91inch * 4.72inch * 1.97inch Qty per Carton 60 Carton Weight 22.10kgs / 48.72lb Carton Size 50cm * 37cm * 35cm / 19.69inch * 14.57inch * 13.78inch Loading Container 20GP: 411 cartons * 60 pcs = 24660 pcs 40HQ: 956 cartons * 60 pcs = 57360 pcs
€955,24
Original RS Lower Quick-Release Plate For DJI RS 4 / RS 3 / RS 2
1. The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbals tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera.2. Weight: 70 g3. Dimensions: 113×49.5×22 mm (L×W×H)4. Compatibility:--DJI RS 4--DJI RS 3--DJI RS 2Packing list:Lower Quick-Release Plate × 1Specification: General Compatible with DJI: RS 4 , RS 3 , RS 2 Package Weight One Package Weight 0.11kgs / 0.23lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 120 pcs = 62520 pcs 40HQ: 1210 cartons * 120 pcs = 145200 pcs
€43,67
Original RS BG70 High-Capacity 4800mAh Battery Grip For DJI RS 4 Pro/RS 4/RS 3 Pro/RS 3
1. The battery grip can power DJI RS 4 Pro for up to 29 hours or DJI RS 4 for up to 29.5 hours. It also supports powering your camera and accessories with up to 18 watts via the USB-C port at the bottom, catering to prolonged creative sessions.2. Charging Input Voltage: 16.8V 4A3. Rated Capacity: 4800 mAh4. Rated Energy: 69.12 Wh5. Compatibility:--DJI RS 4 Pro--DJI RS 4--DJI RS 3 Pro--DJI RS 3Packing list:RS BG70 High-Capacity Battery Grip × 1Specification: General Compatible with DJI: RS 4 , RS 4 Pro , RS 3 Pro , RS 3 Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 20cm * 10cm * 8cm / 7.87inch * 3.94inch * 3.15inch Qty per Carton 24 Carton Weight 9.02kgs / 19.89lb Carton Size 42cm * 32cm * 34cm / 16.54inch * 12.6inch * 13.39inch Loading Container 20GP: 583 cartons * 24 pcs = 13992 pcs 40HQ: 1354 cartons * 24 pcs = 32496 pcs
€325,42
Original Focus Pro LiDAR For DJI RS 4 Pro / RS 3 Pro
1. The LiDAR boasts 76,800 ranging points, a leap of 77% in quantity, sharpening human-subject edge detection while effectively reducing focus hunting. The max focus distance is 20 meters, and the human-subject focus distance is approximately three times that of the previous generation, effortlessly? handling long-distance focusing with telephoto lenses.2. The 70° FOV is beneficial for edge compositions and close-up shots, providing a larger framing space. The LiDAR refresh rate of 30 Hz allows for faster subject information collection, ensuring more confident focusing on moving subjects. When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus for manual lenses that have been calibrated.Tips:When the stabilizers screen is in 1x mode, the LiDARs ToF sensor operates within a 10-meter sensing range by default. To extend to a 20-meter focus distance, you can tap the + icon on the screen to enable 2x zoom display.Specifications:1. Ranging Points: 76,8002. Sensing Range: 0.5-20 m3. FOV:--Wide-Angle Mode: 65 degree (horizontal), 40 degree (vertical), 76.1degree(diagonal)--Telephoto Mode: 20 degree (horizontal), 20 degree (vertical), 28.3 degree (diagonal)4. Frame Rate: 30fps5. Equivalent Focal Length: 30 mm (wide-angle mode)6. Ranging Accuracy: +/-1% to 3% (affected by the distance)7. Power Consumption: Average approx. 6.3 W, max 6.8 W8. Input Voltage: 6.6-17.2 V9. Operating Temperature: -20- 45 degrees celsius (-4- 113 Fahrenheit)10. Main Body Dimensions: 68×25×57 mm (L×W×H)11. Weight: 140 gCompatibility:DJI RS 4 ProDJI RS 3 ProDJI Focus Pro GripPacking list:Focus Pro LiDAR × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1Specification: General Compatible with DJI: RS 4 Pro , RS 3 Pro Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 12cm * 10cm * 5cm / 4.72inch * 3.94inch * 1.97inch Qty per Carton 72 Carton Weight 15.50kgs / 34.17lb Carton Size 38cm * 42cm * 32cm / 14.96inch * 16.54inch * 12.6inch Loading Container 20GP: 522 cartons * 72 pcs = 37584 pcs 40HQ: 1212 cartons * 72 pcs = 87264 pcs
€1.176,70
Original Focus Pro Motor For DJI RS 4 Pro /RS 4 / RS 3 Pro / RS 3 / Ronin 4D Flex
1. The motor speed has increased by 30% for more responsive control over focus, zoom, and aperture. The motor is compatible with 15mm universal rods. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port.2. 2.4GHz Transmitter Power (EIRP): ?< 20 dBm (CE/SRRC/MIC), < 26 dBm (FCC)3. 2.4GHz Transmission Distance: 160 m/100 m4. Dimensions: 100×61×34 mm (L×W×H)5. Weight: 123 g6. Rod diameter: 15 mm7. Output gear teeth: 308. Output gear module: 0.8Compatibility:DJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI Focus Pro GripDJI Focus Pro Hand UnitDJI Ronin 4D FlexTips:1. The motor can be powered through third-party devices. Do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage.2. DJI RS 4 Pro can be used with up to two motors simultaneously, while DJI RS 4 only supports one motor.Packing list:Focus Pro Motor × 1Motor Rod Mount Kit × 1Focus Gear Strip × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1FIZ Sticker × 1?15mm Rod × 110mm 1/4"-20 Screw × 2Specification: General Compatible with DJI: RS 4 , RS 4 Pro , RS 3 Pro , RS 3 Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 20cm * 12cm * 7cm / 7.87inch * 4.72inch * 2.76inch Qty per Carton 24 Carton Weight 8.30kgs / 18.30lb Carton Size 42cm * 34cm * 30cm / 16.54inch * 13.39inch * 11.81inch Loading Container 20GP: 622 cartons * 24 pcs = 14928 pcs 40HQ: 1445 cartons * 24 pcs = 34680 pcs
€294,28
Original RS Upper Quick-Release Plate For DJI RS 4 Pro / RS 4 / RS 3 Pro / RS 3 / RS 2
1. The upper quick-release plate has added an adjustable placement guide, which fits flush against the bottom of the camera to serve as a stopper. Even when used with a single 1/4" screw, it can secure the camera in place, preventing loosening or shifting.2. Weight: 32 g3. Dimensions: 55×38×16.3 mm (L×W×H)4. Compatibility:--DJI RS 4 Pro--DJI RS 4--DJI RS 3 Pro--DJI RS 3--DJI RS 2Packing list:D-Ring Camera Mounting Screw 1/4"-20 × 1Screw 1/4"-20 × 1Upper Quick-Release Plate × 1Specification: General Compatible with DJI: RS 4 , RS 4 Pro , RS 3 Pro , RS 3 , RS 2 Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 12cm * 8cm * 5cm / 4.72inch * 3.15inch * 1.97inch Qty per Carton 108 Carton Weight 8.67kgs / 19.11lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 108 pcs = 47412 pcs 40HQ: 1019 cartons * 108 pcs = 110052 pcs
€27,89
Original RS Pro Lower Quick-Release Plate For DJI RS 4 Pro / RS 4 / RS 3 Pro / RS 3 / RS 2
1. The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbals tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera.2. Weight: 80 g3. Dimensions: 129.6×49.5×22 mm (L×W×H)4. Compatibility:DJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI RS 2Packing list:Lower Quick-Release Plate × 1Specification: General Compatible with DJI: RS 4 , RS 4 Pro , RS 3 Pro , RS 3 , RS 2 Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 15cm * 8cm * 3cm / 5.91inch * 3.15inch * 1.18inch Qty per Carton 120 Carton Weight 13.10kgs / 28.88lb Carton Size 47cm * 34cm * 32cm / 18.5inch * 13.39inch * 12.6inch Loading Container 20GP: 521 cartons * 120 pcs = 62520 pcs 40HQ: 1210 cartons * 120 pcs = 145200 pcs
€46,90
Original Focus Pro Hand Unit For DJI Focus Pro Motor
1. The hand unit features a built-in RF module and supports wireless communication with the DJI Focus Pro Motor from up to 160 meters away. It supports FIZ control over the focus, aperture, and zoom, and features real-time, stepless damping adjustment to balance comfort and precision.2. Transmitter Power: less than 20 dBm (CE/SRRC/MIC), less than 26 dBm (FCC)3. Dimensions: 128×87×87 mm (L×W×H)4. Weight: 555 g (without battery)5. Static Power Consumption: 0.83 W6. Operating Temperature: -20-45 degrees celsius (-4-113 Fahrenheit) (excluding battery temperature)Compatibility:--DJI Focus Pro Motor--DJI Ronin 4D(Requires the DJI High-Bright Remote Monitor)--DJI Inspire 3(Requires the DJI High-Bright Remote Monitor)Tips: the hand unit utilizes the NP-F550 battery model commonly available on the market. The dimensions should be 71×38.6×21.1 mm (L×W×H). Make sure to purchase batteries according to these specified dimensions.Packing list:Focus Pro Hand Unit × 1D-TAP to USB-C Power Cable (50 cm) × 1Replaceable Focus Marking Ring × 4Specification: General Compatible with DJI: Inspire 3 Package Weight One Package Weight 0.65kgs / 1.44lb One Package Size 17cm * 12cm * 10cm / 6.69inch * 4.72inch * 3.94inch Qty per Carton 24 Carton Weight 16.70kgs / 36.82lb Carton Size 36cm * 50cm * 32cm / 14.17inch * 19.69inch * 12.6inch Loading Container 20GP: 462 cartons * 24 pcs = 11088 pcs 40HQ: 1074 cartons * 24 pcs = 25776 pcs
€1.590,35
Sunnylife RO-Q9233 Carry Type Adjustable Angle SLR Stabilizer Handle For DJI RONIN RS-C2 / RONIN S / SC(Black)
1. Material: Aluminum alloy2. Suitable for Ronin RSC 2/S/SC3. Function: You can adjust the angle, expand the light, microphone, monitor, etc.4. Features: Multiple expansion interfaces, comfortable to hold5. Interface: 1/4 screw hole, 3/8 screw hole, hot shoe seat6. Process: CNC cutting process7. There is a soft pad inside to protect the camera from scratches8. Loosen the knob to adjust the angle9. Non-slip handle, comfortable to hold10. Size: About 33 cm11. Weight: 258 gramsSpecification: General Compatible with DJI: RSC 2 Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 39cm * 14cm * 5.2cm / 15.35inch * 5.51inch * 2.05inch Qty per Carton 20 Carton Weight 6.70kgs / 14.77lb Carton Size 52cm * 30cm * 40cm / 20.47inch * 11.81inch * 15.75inch Loading Container 20GP: 427 cartons * 20 pcs = 8540 pcs 40HQ: 992 cartons * 20 pcs = 19840 pcs
€42,22
External GPS Module for DJI Ronin-S
1. Effectively provide gimbal location information and speed information to provide reference for PTZ attitude calculation 2. Improve the stability of the pan/tilt during rapid acceleration, reducing the skew of the picture 3. Weight: about 38 g 4.GNSS: GPS + GLONASS dual mode 5. Working voltage: 12 V 6. Input current: 60 mA 7. Size: 5x5x7cm Packing list External GPS module x 1 Accessory adapter plate x 1 M4 screw x 4 1/4"-20 screw x 2Specification: General Compatible with DJI: RONIN-S Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 15cm / 3.94inch * 3.94inch * 5.91inch Qty per Carton 80 Carton Weight 7.00kgs / 15.43lb Carton Size 50cm * 40cm * 45cm / 19.69inch * 15.75inch * 17.72inch Loading Container 20GP: 296 cartons * 80 pcs = 23680 pcs 40HQ: 687 cartons * 80 pcs = 54960 pcs
€133,24
Adjustable Monitor Mount for DJI Ronin-S / SC
1. Easy to use and easy to install 2. High quality materials, safe to carry 3. The component is mounted on the NATO interface of the R-S or Vision SC dual-handle crossbar kit to mount the monitor screen accessory for shooting. 4. The fixed angle of the monitor screen can be adjusted to meet different shooting needs. It is also possible to install a shadow S/SC phone holder or other equipment and accessories with a 1/4" threaded connection. 5. Adjustable monitor screen fixed angle 6. Weight: 73 grams Packing list Monitor screen fixing unit x 1 3/16' wrench x 1Specification: General Compatible with DJI: RONIN-SC , RONIN-S Package Weight One Package Weight 0.08kgs / 0.19lb One Package Size 25cm * 20cm * 10cm / 9.84inch * 7.87inch * 3.94inch Qty per Carton 40 Carton Weight 4.70kgs / 10.36lb Carton Size 60cm * 55cm * 55cm / 23.62inch * 21.65inch * 21.65inch Loading Container 20GP: 146 cartons * 40 pcs = 5840 pcs 40HQ: 341 cartons * 40 pcs = 13640 pcs
€53,61
Fitting Adapter Plate for DJI Ronin-S / SC
1. Easy to use and easy to install 2. High quality materials, safe to carry 3. The adapter adapter plate is equipped with a 1/4"-20 threaded hole for mounting to the camera hot shoe module or M4 tapped hole for fixing the GPS module and DJI professional wireless receiver. 4. Applicable to such as S, such as shadow SC, DJI master wheel three-axis version, DJI master wheel two-axis version, DJI somatosensory controller professional version, DJI professional wireless receiver 5. Size: 5x5x7cmSpecification: General Compatible with DJI: RONIN-SC , RONIN-S Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 10cm * 15cm / 3.94inch * 3.94inch * 5.91inch Qty per Carton 50 Carton Weight 4.80kgs / 10.58lb Carton Size 42cm * 40cm * 50cm / 16.54inch * 15.75inch * 19.69inch Loading Container 20GP: 317 cartons * 50 pcs = 15850 pcs 40HQ: 736 cartons * 50 pcs = 36800 pcs
€37,69
Sunnylife RO-Q9152 Extension Mounting Clamp Adapter for DJI RONIN-S Gimbal(Black)
1. Roin-S extension clamp mount adapter only for DJI Ronin-S stabilizer. 2. Made of metal alloy, solid and durable to provide security for mounting accessories. 3. 1/4 screw hole enables you to mount a monitor, microphone or LED video light, also can be used with magic arm. 4. Easy to set and remove. 5. Connecting to Smartphone, tablet, Crystalsky monitor, real-time displays the shooting pictures.Specification: General Compatible with DJI: RONIN-S Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 8cm * 7cm * 3cm / 3.15inch * 2.76inch * 1.18inch Qty per Carton 500 Carton Weight 16.50kgs / 36.38lb Carton Size 46cm * 35cm * 34cm / 18.11inch * 13.78inch * 13.39inch Loading Container 20GP: 487 cartons * 500 pcs = 243500 pcs 40HQ: 1130 cartons * 500 pcs = 565000 pcs
€8,64
PGYTECH P-RH-001 Shockproof Waterproof Explosion-proof Hard Box Carrying Case for DJI Ronin-S, Size: 63.4x50.3cm(Black)
1. Spesically design for DJI Ronin-S, hard shell design, wear-resistant and drop-resistant 2. Highly tight waterproof, can withstand repeated watering test; 3. High-density sponge, good flexibility, easy to store the drone body and its accessories 4. Portable handle, strong bearing capacity, comfortable hand feeling, relieve pressure 5. Material: PP+EVA 6. Size: 634x503x227mm 7. Weight: 7KGSpecification: General Compatible with DJI: RONIN-SC , RONIN-S Package Weight One Package Weight 10.00kgs / 22.05lb One Package Size 65cm * 52cm * 23cm / 25.59inch * 20.47inch * 9.06inch Qty per Carton 2 Carton Weight 20.60kgs / 45.41lb Carton Size 66cm * 53cm * 46cm / 25.98inch * 20.87inch * 18.11inch Loading Container 20GP: 165 cartons * 2 pcs = 330 pcs 40HQ: 384 cartons * 2 pcs = 768 pcs
€324,65