Mobile Phone Accessories

Features:1. Bluetooth 5.3, compatible with all Bluetooth devices. Built-in call microphone for easy answering/making calls.2. High power, built-in stereo and 360-degree stereo sound.3. TWS function, you can connect two speakers to synchronize with one mobile phone.4. Large-capacity lithium battery can play music repeatedly for a long time.5. Simple button control, you can press the button to turn on/off, play/pause, switch modes, skip songs, adjust volume, etc.6. Supports music files in mp3, wma, WAV, FLAC, and ape formats.7. Support TF card or Misro SD card, support USB2.0 hard disk.Specification:1. Bluetooth specification: V5.32. Transmission range: 10M3. Battery capacity: 500mAh4. Built-in voltage: 3.7V5. Playing time: about 1H (varies depending on audio content and volume)6. Speaker specifications: 52mm7. Speaker power: 4Ω/5W8. Frequency response: 120Hz-18KHz9. Audio noise ratio: greater than or equal to 85db10. Size: 110x76x82mm11. Weight: 266G12. Charging input: 5V/500mApacking list:1. Bluetooth speaker x 12. USB cable x 13. User manual x 1

Read more less

Features1. Bone Conduction Technology: The bluetooth speaker adopts bone conduction technology, utilizes bone conduction vibration sound generator, and adaptive noise reduction technology. It can deliver clear music to the human ear without wearing it, and there is no need to worry about the sound affecting the family around you. 2. Healthy Sleep: The bone conduction pillow speaker is a sleep aid music box, specially tailored to relieve sleep. It can have a good effect for adults and babies to fall asleep. It can be used for both men and women. Whether it is a nap during the day or sleep at night, it can improve the quality of sleep makes your sleep healthier. 3. Two Modes: Freely switch between vocals / bass modes. Double-click the "-" button to switch the playback mode to meet the usage needs of listening to different types. If you are listening to a speech, then vocal mode would be a better choice. 4. Long Standby Time: This product has a built-in 400mAh battery, which can run continuously for up to 15 hours after being fully charged, and the longest standby time can reach 150 days, which can provide you with a more continuous and comfortable music experience. You can set the sleep mode, increase or decrease in five-minute increments to set the time to turn off, enjoy music and sleep comfortably. 5. Easy to Use: The pillow speaker uses a new generation of BT 5.2 chip, which can be effectively connected within 10 meters, low power consumption, zero delay, and the sound is more stable and clear. LED real-time power display, power consumption at a glance. Simple operation, convenient USB-C charging.

Read more less

1. Bluetooth version: 5.02. Bluetooth distance: 10M3. Rated power: 5W4. Frequency response: 100hz-18khz5. Playing time: 4 hours6. Charge time: 2 hours7. Bluetooth frequency: 2.4-2.48GHZ8. Battery Specification 3.7v/400ma9. Weight: 200g10. Package included: A. 1 x Bluetooth speakerB. 1 x USB cableC. 1 x User manual11. Big power with small volume, redefines the super bass concept, the speaker comes equipped a downward passive radiator12. Featured super bass give you high-fidelity music enjoyment. fully equipped custom-made high-performance 3W neodymium driver, surprisingly loud with well-balanced sound13. Large acoustic cavity, crisp highs, deep bass.

Read more less

1. Bluetooth version: 5.02. Bluetooth distance: 10M3. Rated power: 5W4. Frequency response: 100hz-18khz5. Playing time: 4 hours6. Charge time: 2 hours7. Bluetooth frequency: 2.4-2.48GHZ8. Battery Specification 3.7v/400ma9. Weight: 200g10. Package included: A. 1 x Bluetooth speakerB. 1 x USB cableC. 1 x User manual11. Big power with small volume, redefines the super bass concept, the speaker comes equipped a downward passive radiator12. Featured super bass give you high-fidelity music enjoyment. fully equipped custom-made high-performance 3W neodymium driver, surprisingly loud with well-balanced sound13. Large acoustic cavity, crisp highs, deep bass.

Read more less

1. Mecha style, easy to install2. Four corners silicone cushion to protect the phone3. Effective filtration of the vibration brought by the locomotive, to protect the phone camera from being shaken4. Anti-static material, high and low temperature resistance, anti-aging5. Material: PA6. Size: about 6.5 x 6.5cm

Read more less

1. Material: aluminum alloy2. Weight: about 900 grams3. Size: about 8.7x15 cm, can be extended to 10.6x20 cm4. Applicable mobile phone size: 4.7-7.12 inch mobile phone, about 13.5-18.5 cm long and 5.5-9.2 cm wide5. Applicable models: bicycles, motorcycles, rally cars, scooters, tricycles, electric vehicles, etc.6. Installation instructions: T-shaped ball head is suitable for handlebar/tube installation, and crooked ball head is suitable for rearview mirror installationFeatures:1. Aluminum alloy material, waterproof and rustproof, shockproof and stable, safe and practical2. Easy to install, the stop feet on both sides can be adjusted according to the width of the phone, one-key lock, spring expansion, easy access3. The universal ball head can be rotated 360 degrees at will, and can be adjusted freely according to the conditions of use4. A wide range of applications, compatible with a variety of mobile phone devices5. It can be installed and used with a variety of base fixed ball heads

Read more less

1. Material: aluminum alloy 2. Installation method: rearview mirror installation 3. Mounting aperture: 8-10mm 4. Scope: suitable for 4-6.5 inch mobile phone installation and use 5. Product features: fixed mobile phone, navigation, and power supply for mobile phones, navigation 6. Installation range: can be used on battery vehicles, motorcycles, electric tricycles, off-road vehicles, ATVs, etc. 7. Input voltage: DC12V 8. Output voltage: 5V 9. Output current: 2A 10. 360-degree swivel design, let you adjust the mounting angle of the bracket as you like, very user-friendly 11. Line length: 124CM 12. Net weight: 191G

Read more less

1. Material: 6061 aluminum alloy, stainless steel, fireproof ABS, silica gel2. Application: motorcycles, bicycles, electric vehicles, scooters, scooters, etc.3. Installation range: motorcycle leading handlebar, rearview mirror installation, base diameter 22/25.4/32mm4. Applicable model size: width of about 65-90mm, length of about 130-175mm, thickness of about 12mm or less5. Features: Support 360-degree universal adjustment angle, quick access, automatic telescopic, one-key locking, easy access, four-jaw fixed, four corners with rubber pads to protect the phone, shock absorption and anti-skid6. Single package size: about 19.3x11.2x6 cm7. Weight: about 238g

Read more less

1. Easy to install/disassemble on the windshield. 2. Built-in buttons, clips can be easily and automatically expanded. 3. Can be rotated, horizontally or vertically supported, and the clamp arm can be extended. 4. The soft protective pad on both sides of the clip is designed to not damage the phone. 5. Strong compatibility. Specification: 1. Arm telescopic distance: 100-150mm. 2. Clip extension distance: about 7-10cm. (Manual measurement, there may be some errors).

Read more less

1. Provide you with more flexible and high-end car wireless charging experience. 2. It is installed on the vent through a flexible silicone clip, which is safe and stable. 3. Built-in 360-degree rotating stainless steel ball for angle adjustment. 4. A wireless charging device with strong magnetic and QI standards. 5. Recharge as soon as it is released. Even if there is vibration, it is not easy to fall off. 6. Input: 5V 2A/ 9V 2A, output: 15W 7. Size: 95x65x8mm 8. Need to be used with a specific phone case

Read more less

1. Material: ABS 2. Put it down and clamp it, take it out and release it, adjust it automatically, simple and fast. 3. Six silica gel claws provide strong friction and stability, and are stable and safe. 4. Without the mobile phone, the bracket is automatically retracted. After the bracket is placed, the bracket unfolds automatically. 5. Use thick soft silica gel cushion, anti-skid, anti-scratch, without damaging the outlet. 6. Reserve data line charging port, charging more convenient 7. Applicable to all kinds of mobile phones

Read more less

1. Safe and secure, bumpy road shape, do not worry about falling. 2. It is exquisite and compact, easy to disassemble, and does not affect the line of sight when used. 3. Durable and reliable. 4. Creative design and unique shape. 5. 360 degree rotation, can adjust any angle.

Read more less

1. For phones with wireless charging function; delivery of ultra-thin steel sheet, other mobile phones with wireless charging function can also achieve magnetic wireless charging by attaching a patch 2. The strong magnetic thickness is up to 4.8mm, and the surface is equipped with non-slip silicone ring to make it more stable. It can be absorbed by a mobile phone case with a thickness of 1.2mm. 3. 15W high power, support QI wireless charging standard, fast charging 4. Intelligent recognition of foreign objects, no waste of electricity 5. 360 degree free rotation; mobile phone can be horizontal or vertical screen 6. One-handed pick and place, simple operation 7. Made of all aluminum alloy shell, sprayed with 180 degree bright silver sand surface, 52H hardness, high temperature resistance 8. The universal design of the instrument panel and the air outlet is adopted to meet the interior space of different scenarios Product specifications: 1. Input: 9V 2A/ 5V 2.4A 2. Output: 15W/10W/7.5W/5W 3. Size: 57x57x64mm 4. Installation method: paste type (center console) / clip-on type (air outlet) 5. Material: metal+silicone+PC

Read more less

1. Strong adhesive design, suitable for a variety of flat surfaces, stable and not easy to fall off, without leaving glue marks2. Applicable scene: car3. Material: zinc alloy shell4. Product net weight: 20.6g5. Product size: 33.5x8mm

Read more less

1. Made of high quality plastic and rubber material, durable to use. 2. It provides you convenience and ease in mounting your device thus gives you more time and energy to take beautiful shots in different places 3. Easy mounted and fixed 4. Low base with vacuum suction cups. 5. Can be attached securely to your car window, dashboard etc 6. Stronger suction force, make a safer protection for your camera and phone Notices: 1. The camera and phone are not included 2. The real object is subject to Picture 1, and other pictures are only for effect display

Read more less

1. Made of high quality plastic and rubber material, durable to use. 2. It provides you convenience and ease in mounting your device thus gives you more time and energy to take beautiful shots in different places 3. Easy mounted and fixed 4. Low base with dual vacuum suction cups. More secure than one base suction cups 5. Can be attached securely to your car window, dashboard etc 6. Stronger suction force, make a safer protection for your camera and phone Notices: 1. The camera and phone are not included 2. The real object is subject to Picture 1, and other pictures are only for effect display

Read more less

1. Material: aluminum alloy, silicone2. Applicable mobile phone: Universal3. Reserve the charging port of the mobile phone data cable, which is more convenient for charging4. Using frosted aluminum alloy + texture mirror technology, beautiful and durable5. The mobile phone clip adopts a thickened non-slip high-elastic silicone pad to increase friction, resist bumps, and protect the mobile phone6. Built-in universal rotating ball, support 360-degree rotation, adjust the angle at will7. Gravity linkage principle, automatically lock the phone

Read more less

1. One-button release, press the arms to lock the phone2. Fully adjustable 360 degree angle3. Powerful suction cup, nano gel, vacuum suction, enhanced power4. Multiple use scenarios5. Wide compatibility, fits for all 4-7 inch phones 6. Material: PC

Read more less

1. 15W fast charging, automatic alignment2. Two circles of strong neodymium magnets for unparalleled magnetic strength3. Crystal clear edge for better light effect4. Easy to operate, place and retrieve your phone in seconds5. Material: ABS+PC6. Input: 5V=2A 9V=2A 12V=1.5A7. Output: 5W/7.5W/10W/15W (max)8. Input port: Type-C9. Applicable phone size: 4.7-6.7 inch

Read more less

1.The holder grips your device tightly and prevents it falling and damage,Simple design,can adjustable angle and height,easy to install 2.Adjustable and fits firmly in the cup holder for car, truck or SUV,Base expands to fit any vehicle cup holder; no suction or adhesive required 3.Adjustable Angle design,360-degree rotatable holder provides you with the viewing angle, enhancing your safe driving experience 4.Fit for i-Phone 12 11 XR/XS Max/XS/X/8/8 Plus/7/7 Plus, for Sam-sung S10/S10 Plus/S9/S8 Edge/Note 9, for Hua-wei mobile phones and More,You could use your cup holders in car, truck, RV, SUV,boat, golf cart, etc 5.Adjustable to hold for all types of 3.5 to 6.7 inch smart phone, GPS/ PND & PSP devices

Read more less

Parameters1. Material: face shell + dumb oil + acrylic lens2. Input: 5V/2A, 9V/2A3. Power: 5W / 7.5W / 10W / 15W (Max)4. Number of coils: 25. Input port: Type-C6. Working distance: about 6mm7. Working frequency: 110-205KHz8. Charging efficiency: 70%9. Working temperature: -20 degrees Celsius - 45 degrees Celsius10. Fast charging protocol: QC2.0/3.0Features1. The silent fan dissipates heat, and the charging efficiency in the car environment is increased by 30%.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. Fully automatic FOD coil induction car wireless charging, stepping silent motor.4. Built-in farad capacitor, the phone can be removed within 15 minutes of power failure.5. Support Samsung / Huawei / LG 10W / Apple 7.5W / Google 15W and other high-power charging.6. The foldable mobile phone can be charged vertically or horizontally, and it is more convenient to use the car map for navigation.7. Easy to assemble and install without blocking the driving sight.8. Packing list: - 1mType C cable x 1- Air outlet bracket x 1- Suction cup holder x 1- 3m suction cup auxiliary sticker x 1- Unisex instruction manual x 1- Neutral color box packaging x 1

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. It supports one-handed pick-and-place, and it can be clamped as soon as it is placed, and it can be stable and not easy to drop on bumpy roads.4. With a built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.5. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

Parameters 1. Product material: ABS+silica gel 2. Product size: 151x85x65mm 3. Product weight: 152g 4. Applicable mobile phone size: 130-170mm 5. Power: 5W / 7.5W / 10W 6. Implementation standard: Qi 1.2.4 7. Input: 9V/2A, 5V/2A 8. Output: 9V/1.2A, 5V/1A 9. Input port: USB-C / Type-C 10. Working distance: about 6mm 11. Working frequency: 110-205KHz 12. Charging efficiency: 70% 13. Working temperature: -20 degrees Celsius - 45 degrees Celsius 14. Automatic sensing method: FOD sensor / infrared sensor 15. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection 16. Installation method: clamp-on / suction cup 17. Fixed position: car air outlet Features 1. Horizontal smart navigation bracket, can hold folding screen mobile phones or other large screen mobile phones 2. Supports different angle adjustments, you can choose to adjust to your comfortable direction 3. The charging port is reserved and does not block the charging hole and mobile phone volume buttons, making it easy to operate. 4. It supports one-hand pick-up and placement, and it can be clamped as soon as it is placed. It can be stable and not easy to fall on bumpy roads. 5. Built-in multiple protection functions such as overcurrent, overvoltage, overtemperature, and short circuit to ensure safe and fast charging without damaging the machine.

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. It supports one-handed pick-and-place, and it can be clamped as soon as it is placed, and it can be stable and not easy to drop on bumpy roads.4. With a built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.5. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

Parameters1. Product material: ABS+silicone2. Product weight: 177g3. Power: 5W / 7.5W / 10W / 15W Max4. Implementation standard: Qi 1.2.45. Input: 12V/2A, 9V/2A, 5V/2A6. Output: 12V/1.3A, 9V/1.2A, 5V/1A7. Input port: USB-C / Type-C8. Working distance: about 6mm9. Working frequency: 110-205KHz10. Charging efficiency: 70%11. Working temperature: -20 degrees Celsius - 45 degrees Celsius12. Automatic sensing method: FOD sensor13. Safety protection: FOD (foreign object detection), overvoltage protection, overcurrent protection, overtemperature protection14. Installation method: clip-on / suction cup15. Fixed position: car air outletFeatures1. Support all wireless charging devices.2. Dual-coil design, supports wireless charging for Samsung Z Flip series mobile phones.3. Automatic FOD coil induction car wireless charging, stepping silent motor.4. Built-in farad capacitor, the phone can be removed within 15 minutes after power failure.5. Samsung Z Fold series mobile phones can be charged vertically or horizontally, and the car map navigation is more convenient.6. Built-in upgrade chip, the wireless car charger intelligently recognizes your device and charges it safely at the fastest speed.7. Built-in multiple protection functions such as over-current, over-voltage, over-temperature, short-circuit, etc., to ensure safe fast charging without damaging the machine.

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. Material: aluminum alloy + PC2. For Audi A3/S3/Q2L3. Intelligent linkage of industrial structure, convenient for one-handed operation4. Strong magnetic adsorption design, stable placement5. Does not block the key operations such as the charging port of the mobile phone6. It is not easy to drop the mobile phone after it is placed, and it is not afraid of bumpy roads7. Installed in the middle of the air outlet of the car, not blocking the air outlet and sight of the air conditioner8. Aluminum alloy technology, automatic gravity sensor9. Highly compatible devices, suitable for most mobile phone sizes10. Weight: about 50 grams

Read more less

1. 3-axis locking structure, firmly grasping the rearview mirror.2. The connecting rod can be adjusted up or down in length, and can rotate 360 degrees in circular, without obstructing the driver view.3. Upgrade the spring phone clip to be compatible with 12-25.3cm phones or Tablet PC.4. Material: PC+silicone5. Weight: 251g

Read more less

1. Material: ABS+Silicone+N50 magnet2. Weight: 87g3. Installation method: car CD port4. Easy to install, plug and play5. One-handed pick and place, strong magnetic adsorption, put and suck, not easy to drop when encountering bumpy road conditions6. The built-in universal ball can be rotated 360 degrees, and the viewing angle can be adjusted at will. It can be used horizontally and vertically, and the navigation is more convenient7. Silicone pads are added to the contact points, which are shock-absorbing and non-slip, and will not hurt your car and mobile phone8. Applicable equipment: suitable for mobile phones of various sizes

Read more less

1. Multi-function car LCD digital display2. With car charger, and can real-time monitor temperature and car voltage3. To ensure the safety of your car4. Easy to install,no needed the professional skill5. A special car thermometer with stylish and lightweight design6. Provide extremely convenience7. Digital thermometer suitable for 12V/24V battery measuring range: -9~80 degree Celsius8. Simply plug into charger socket, instant confirmation of battery voltage, low power consumption high light display. 9. Specifications:Material: ABS + Electronic ComponentsProduct Color: BlackLCD indicator color: blue & red, green & red, redProduct size: 76*47mmModel: VST-706Voltage: 12/24VUSB output: 5V 2.1ADisplay: Digital displayDisplay Type:Temperature DisplayVoltage Display

Read more less

1.Smart Infrared Sensor Design: Automatic opening and clamping design for one-handed operation, making everything easier and safer. Simply place the phone inside the holder and the clip will close and provide a firm and stable hold. Touch the quick-release button on either side and the holder will rotate to level the screen. When your phone is fully charged, the wireless car charger will automatically power off and last the life of your phone's battery2.Qi Wireless Charger and Phone Holder: The 2-in-1 design combines the Qi wireless charger and the car phone holder in one device. The wireless car charger provides fast charging for your phone and keeps you free from cables and phone cases while driving.3.Strong Suction Cups and Adjustable Viewing Angle: You can install the wireless car charger holder multiple times, and it can be securely mounted on windshields, dashboards, and tables with strong suction cups. Full 360-degree rotation allows for optimal viewing angles and easier use of features, which is the safest way to access cell phone systems like GPS and phone4. Faster Charging: No need to remove the case when charging (most cases on the market, except for rough, uneven ones.). The car mount can hold all phones with 60-80mm width tightly, which is good for all QI-supported phones5.Product features: Over-current / over-temperature protection, CE / FCC / ROHS certification, Appearance patent certification, Touch sensor6. Built-in lithium battery: 200 mah

Read more less

1.Auto-Clip and One-Hand Operation: This car wireless charger is equipped with auto-sensing technology. When the phone is connected to the car mount, the two clips of the mount will automatically close and hold the phone; to release the phone, touch the top of the mount with your hand and the clips will automatically open, then you can take the phone out2.Fast Charging and Adjustable View: Qi wireless car charger supports safe and fast charging and reliable phone protection. It intelligently identifies wireless fast charging devices and intelligently adjusts the power between 5W/7.5W/10W/15W/20W/30W/40W/40W/5W/65W/75W/10W/120W/130W/150W. Note: We recommend you use a QC3.0 car charger adapter (not included) for fast charging, otherwise it may lead to intermittent charging3.Support Rotation: The 360-degree swivel mount provides the flexibility to choose to view your phone or GPS while driving. this means the view is not blocked and you get a view with the car wireless charger mount4.Wide Compatibility: The flexible clips and hooks, the phone's screen size can support almost all Qi phones from 4.5 to 6.7 inches, compatible with Huawei Mate 20 Pro, P30 Pro, Samsung Galaxy S22/S21/S20/S10/S10+, S9/9+, S8/8+, Note9, Note8, iPhone 14/ 14 Pro/14 Pro Max/13/13 Pro/13 Pro Max/12/12 Pro Max/11/11 Pro Max/Xs/Xs Max/XR/8/8 Plus, etc. 5.Product Features: Over-current / over-temperature protection, CE/FCC/ROHS certification, appearance patent certification, touch sensor6.Battery Capacity: 200mah

Read more less

1. Material: aluminum alloy2. Input voltage: 12-24V3. Output: 12V/1.5A, 9V/2A, 6V/3A4. No-load power: 0.18W5. Output interface: USB6. Applicable charging range: mobile phones, tablets, vehicle-mounted instruments, electrical appliances, etc.7. Size: about 4.9x3.7x2.9 cm8. Weight: about 36g

Read more less

1. This charging cable directly plugs into your car stock OBD2 port with switch button to master the charger power 2. Provide an dedicate car DVR/GPS/phone micro usb charger and save one car cigarette lighter charger for another use 3. Smooth and Non destructive installation. Very easy to DIY. Overcurrent protection, Short-circuit protection, Waterproof 4. DC 8-36V Wide Range Input, output: DC 5V, 2A. Universal for all vehicles (Car Truck Boat Ferry etc..). Cable length: 3.4m 5. Quickly charge your GPS tablet, Smart phone, DVR, Camcorder E-dog etc...

Read more less

1. Integrated smart chipset, 10W fast charging, efficient charging, intelligent power off, faster and safer charging. 2. Built-in overvoltage protection / short circuit protection / high temperature protection / overcurrent protection. 3. Built-in fast charge chip, support 7.5W iOS fast charge, 10W Android fast charge. 4. Fit to the body, install without damage, and hide the design. 5. Parameters: Material: ABS + PC Coil design: high power three coils Working temperature: -20 ~ 70 degrees Celsius Transmit power: 10W Efficiency:> 75% Working frequency: 110KHz-143KHz Input voltage: 9-16V Output voltage: 5-9V Output current (max): 1.1A Fits for 2015-2019 Land Rover Discovery Sport

Read more less

1. The shell is made of metal + flame-retardant VO PC material, high temperature resistance2. Laser texture, delicate and textured3. Ring ambient light, soft and warm4. Manganese steel strip-shaped shrapnel, good toughness, fast stuck5. Working temperature: -10 to 45 degrees Celsius6. Output current: 6A7. Output voltage: 4.5-12V8. Working voltage: 12-24V9. Size: 32.6x63.8mmFeatures:1. TM313: Dual USB ports simultaneously output, share 22W power, support digital display function2. TM319: has a QC3.0 18W USB interface and a PD 30W (PPS) Type-C interface3. TM328: Dual USB ports output at the same time; the green USB interface is suitable for Huawei 22.5W/40W/66W super fast charging, suitable for OPPO super flash charging 30W/65W, suitable for OnePlus WARP 30W/65W; black USB interface output: DC 5V/2.4A3. TM328L: Dual USB ports simultaneously output; support digital display; the green USB interface is suitable for Huawei 22.5W/40W/66W super fast charging, suitable for OPPO super flash charging 30W/65W, suitable for OnePlus WARP 30W/65W; black USB interface output: DC 5V/2.4A4. TM329: USB interface is suitable for Huawei 22.5W/40W/66W super fast charging, for OPPO super flash charging 30W/65W, suitable for OnePlus WARP 30W/65W, PD Type-C interface output: 20W/25W (PPS )5. TM330: Both ports are PD 30W Type-C (PPS)

Read more less

1. The shell is made of metal + flame-retardant VO PC material, high temperature resistance, safe and durable2. Upgraded and strengthened rigid contacts, firmly stuck, not afraid of bumps3. The ring-shaped ambient light, soft and warm, does not touch the dark when plugged and unplugged at night4. Temperature control components, smart IC, pure copper spring5. Material: metal+PC6. Output current: 6A7. Output interface: 2 x USB8. Input voltage: 12-24V9. Output voltage: USB green: DC4.5-12V / 6A, USB blue / black: DV 5V / 2.4A10. Working temperature: -10 to 45 degrees Celsius11. Applicable charging range: mobile phones, tablets, digital products12. Dimensions: 68 x 32 x 20.5 mm13. Weight: about 35gFeatures:1. GX739: for Huawei 40W / OPPO 65W / OnePlus 22.5W, for Xiaomi / Samsung (QC3.0/2.0), etc., total 78W (66W+12W)2. GX789: dual USB fast charge, for Huawei 66W, total 88W (66W+22.5W)3. GX506L: with digital display, dual USB fast charging, for Huawei 66W, total 88W (66W+22.5W)

Read more less

1. The shell is made of metal + flame-retardant VO PC material, high temperature resistance2. Smart IC, automatic protection for over current, over voltage, over temperature and short circuit3. The ring-shaped ambient light, soft and warm, does not touch the dark when plugged and unplugged at night4. Upgraded and strengthened rigid contacts, firmly stuck, not afraid of bumps5. Working temperature: -10 to 45 degrees celsius6. Output current: 5A7. Output voltage: USB green/purple: DC4.5-12V / 5A, USB blue/black: DC5V / 2.4A,8. Working voltage: 12-24V9. Material: metal+PC10. Dimensions: 68 x 32 x 20.5 mm11. Weight: about 32gFeatures:1. QK505: for Huawei 22.5W super fast charge2. QK505L: with digital display; for Huawei 22.5W super fast charging3. QK739: the full protocol for OPPO 65W super fast charging, and for Huawei 40W super fast charging4. QK789: dual USB ports output at the same time; the green port for Huawei 40/22.5/66W super fast charging; the purple port for Huawei 22.5W super fast charging, for Xiaomi for Samsung QC3.0/2.0, etc.5. QK506L: with digital display; dual USB ports output at the same time; the green port for Huawei 40/22.5/66W super fast charging; the purple port for Huawei 22.5W super fast charging, etc.

Read more less

1. Car Bluetooth MP3 supports hands-free calling, built-in high-sensitivity microphone, HSP noise floor and echo suppression2. LED digital display, can display frequency and working status information3. Automatically detect car battery voltage, voice reminder, support real-time voltage check4. Bluetooth smart MP3 player, support mobile phone/network/various music APP software playback5. Support mainstream map APP navigation voice broadcast and QQ/WeChat other software language playback functions6. Support lossless audio decoding, high resolution, high performance stereo, support WMA/APE/FLAC/WAV and other lossless music formats7. Support TF card and U disk expansion playback8. Upgraded Bluetooth 5.0 chip, more stable connection and faster automatic reconnection9. Support playback breakpoint memory function10. Dual USB, with smart recognition, fast charging11. Flame retardant support button operation to switch folder playback12. Knob design, one-key operation to adjust volume / answer / hang up / call back13. Output voltage: 5V14. Output current: 3.4A15. Input voltage: suitable for 12-24V car16. Output power: 17W17. Dimensions: 45x36x73mm18. Weight: 29g19. Material: ABS+PC

Read more less

1. Smart fast charging, support dual USB charging at the same time2. Support Bluetooth music/TF card/U disk playback, support Bluetooth hands-free communication3. LED screen, can display frequency, voltage display4. Reinforced anti-slip pad design, the car charger fits closely with the cigarette hole, and the shockproof effect is good5. Material: ABS+PC, electronic components6. Product features: one-button hands-free calling, Bluetooth music playback, dual USB 3A charging, TF card/U disk music playback, FM FM transmission7.Using voltage: DC12-24V8. Output current: 3A9. Bluetooth version: 5.010.FM frequency: 87.5-108MHz11. Audio format: MP3/WAM12. Signal to noise ratio: 85db (FM: 65db)13. Bluetooth distance: 5 meters14.FM transmission distance: 5 meters15. Dimensions: 8 x 4.5 x 1.5 cm16. Product net weight: 40 grams

Read more less

1. This dummy tablet PC model is designed for iPad Pro 11 2022. This fake model is exactly the same in the appearance, size of the real tablet PC, and pattern on the screen, but it canot work. 2. Party Pranks: Great for pranks and parties! Trick your friends and family into thinking you destroyed, damaged, or lost their tablet PC. It is so realistic looking they will not be able to tell the difference. 3. Pretend Play for Kids: Occupy your children by providing them a toy tablet PC so that they do not damage your real one. 4. In-Store Displays and Photo Shoots: Display a model tablet PC instead of real devices to your customers to avoid theft or damage. Use safely in video and photography production shoots, stunts, or media events. 5. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but card slot could not be pulled out. 6. Compatible with Accessories and Cases: Works with standard tablet PC cases, data cables, and other accessories just like a real tablet PC. Accessorize your toy tablet PC like you would a real one.

Read more less

1. This dummy phone model is designed for Samsung Galaxy S23 Ultra 5G 2. Pretend Phone Toy: Substitute your real cell phone to children that want a phone so badly but is still too young to have one. Party surprises, phone collection, children toys or other entertaining purposes. 3. Display Use: Cell phone store / phone accessories store display use, it is perfect to try out phone cases or other accessories. 4. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but sim card slot could not be pulled out. 5. This product is designated merely for phone store display, photographing tools, phone case tryout, kid plaything, prank or other legal use only. It is realistic, but its similarity is also controlled at the degree of one should easily tell apart from a real phone.

Read more less

1. For Samsung Galaxy A32 5G display model with black screen. 2. One to one simulation. 3. Firm and durable. 4. Each item has been checked and in good condition before shipping. 5. Ideal gifts or surprises in party, also could serve for display purpose.

Read more less

1. This dummy tablet PC model is designed for iPad 10th Gen 10.9 2022. This fake model is exactly the same in the appearance, size and weight of the real tablet PC, and pattern on the screen, but it canot work. 2. Party Pranks: Great for pranks and parties! Trick your friends and family into thinking you destroyed, damaged, or lost their tablet PC. It is so realistic looking they will not be able to tell the difference. 3. Pretend Play for Kids: Occupy your children by providing them a toy tablet PC so that they do not damage your real one. 4. In-Store Displays and Photo Shoots: Display a model tablet PC instead of real devices to your customers to avoid theft or damage. Use safely in video and photography production shoots, stunts, or media events. 5. Material: Premium ABS plastic screen to avoid glass injure, identical weight as original tablet PC, keys could be pressed but card slot could not be pulled out. 6. Compatible with Accessories and Cases: Works with standard tablet PC cases, data cables, and other accessories just like a real tablet PC. Accessorize your toy tablet PC like you would a real one.

Read more less

1. This dummy phone model is designed for Samsung Galaxy Z Flip4 2. Pretend Phone Toy: Substitute your real cell phone to children that want a phone so badly but is still too young to have one. Party surprises, phone collection, children toys or other entertaining purposes. 3. Display Use: Cell phone store / phone accessories store display use, it is perfect to try out phone cases or other accessories. 4. Material: Premium ABS plastic screen to avoid glass injure, keys could be pressed but sim card slot could not be pulled out. 5. This product is designated merely for phone store display, photographing tools, phone case tryout, kid plaything, prank or other legal use only. It is realistic, but its similarity is also controlled at the degree of one should easily tell apart from a real phone.

Read more less

1. This dummy tablet PC model is designed for iPad Pro 11 2022. This fake model is exactly the same in the appearance, size and weight of the real tablet PC, and pattern on the screen, but it canot work. 2. Party Pranks: Great for pranks and parties! Trick your friends and family into thinking you destroyed, damaged, or lost their tablet PC. It is so realistic looking they will not be able to tell the difference. 3. Pretend Play for Kids: Occupy your children by providing them a toy tablet PC so that they do not damage your real one. 4. In-Store Displays and Photo Shoots: Display a model tablet PC instead of real devices to your customers to avoid theft or damage. Use safely in video and photography production shoots, stunts, or media events. 5. Material: Premium ABS plastic screen to avoid glass injure, identical weight as original tablet PC, keys could be pressed but card slot could not be pulled out. 6. Compatible with Accessories and Cases: Works with standard tablet PC cases, data cables, and other accessories just like a real tablet PC. Accessorize your toy tablet PC like you would a real one.

Read more less