Bicycle Accessories

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 340g/set2. Size: about 8.6x14.8 cm, can be stretched to 10.4x19.8 cm3. Material: composite material4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: compatible with mobile phones of 4.7-7.12 inches, width of about 5.7-8.9 cm, height of about 13.2-18 cm6. Installation specifications:-T-shaped ball head: suitable for 1.5-3.3 cm handlebar/round tube installation-Skewed ball head: compatible with 10mm aperture, suitable for rearview mirror installation-L-shaped ball head: compatible with 10 mm aperture, suitable for rearview mirror installation-Long ball head: Compatible with 15-33mm round pipe, suitable for oil pump base/square pipe/round pipe installation-Large horseshoe head: screw specification M5-0.8x40mm/M5-0.8x25mm, suitable for fuel tank cap installation-Small horseshoe head: screw specifications M5-0.8x16mm/M5-0.8x20mm/M5-0.8x25mm/M5-0.8x35mm/M5-0.8x45mm/M5-1.0x25mm, suitable for fuel tank cap installation-M10 ball head: screw specification M10x25mm-M8 ball head: screw specification M8-1.25x55/60/65mm-Slim ball head: compatible with 8.2-14 mm round tube-Middle club head: Compatible with 18.9-22.2mm round tubeFeatures:1. Wide compatibility, can be used with a variety of base ball joints2. Composite material, lightweight and shock-absorbing, easy to install, and the width can be adjusted according to the size of the phone3. Damping springs provide resistance to external load pressure and improve durability and stability in use4. Sun-proof and rain-proof, durable5. Multi-angle adjustable, 360-degree rotating base6. Curved horn design, firmly fix the phone

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 700g/set2. Size: about 5.6x11.5 cm, can be stretched to 6.3x13.2 cm3. Material: 304 stainless steel, aluminum alloy, nylon plastic, rubber4. Application: motorcycles, bicycles, etc.5. Applicable mobile phones: small size is suitable for 3.5-5.5 inches, large size is suitable for 5.5-6.5 inches6. Installation specifications:-T type ball head: suitable for 1.5-3.3 cm round pipe/square pipe installation-Skewed ball head: The inner diameter of the screw hole is 10 mm, suitable for rearview mirror installation-L-shaped ball head: screw hole inner diameter 10mm, suitable for rearview mirror installation-Long ball head: suitable for pump cover base/round pipe installation, equipped with two kinds of fixing screwsFeatures:1. Easy to pick and place, small clip opening is small 40mm/opening wide 85mm, big clip opening is small 45mm/opening wide 105mm2. Anti-shock protection, with reinforced mesh, does not block the lens, easy to use3. 360-degree universal ball head, the angle can be adjusted freely, and the angle can be adjusted according to the needs of the bracket and the base ball head4. Easy installation, wide compatibility, loosen the knob to adjust to a suitable angle during installation, and then tighten the knob.5. The phone is firmly fixed by elastic spring contraction and elastic reinforcement net, which is light and durable

Read more less

1. Weight: about 280 grams2. Size: about 14.5x17 cm3. Material: stainless steel, nylon plastic4. Application: motorcycles, bicycles, etc5. Compatible with 6-7.5 cm diameter water cups6. The U-shaped bolt base is compatible with the diameter of the round tube: about 1.5-3 cm.7. T-block: gear design, can be installed in an angular direction, allowing the bottle cage to maintain a vertical effect8. Sliding block: adjustable and compatible with 6-7.5 cm water cup9. Red knob: fixed without falling off, loosen to the left and tighten to the right

Read more less

Product specifications:1. Material: ABS, rubber, hardware2. Adapt to mobile phone size: 5-8.5 cm wide mobile phone3. Weight: 135g/piece4. Packing list: chuck, nut, bicycle clip, strapFeatures:1. The concept of structure and shape is novel and unique, as long as the phone is pressed lightly, it can be locked instantly, which is flexible and convenient2. It has the effects of oil pressure, damping, and two-way bounce3. Smooth movement, low noise, large opening of the clamp arm4. Equipped with different holders, it can be suitable for car and desk use

Read more less

1. Material: aluminum alloy2. Weight: about 105 grams3. Size: about 30x2.2 cm4. Application: installation of car lights, flashlights, computers, mobile phone brackets, etc.5. Features: aluminum alloy material, wear-resistant and durable, not easy to rust, easy to install, easy to use, wide applicability

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 133g3. Clamping range: about 50-101mm4. Applicable mobile phone: 3.5-6 inches5. Applicable models: bicycles, motorcycles, electric vehicles, etc.6. Scope of application: connecting rod adapter / compatible RAM

Read more less

1. Material: engineering plastics, aluminum alloy2. Weight: about 133g3. Clamping range: about 50-101mm4. Applicable mobile phone: 3.5-6 inches5. Applicable models: bicycles, motorcycles, electric vehicles, etc.6. Scope of application: connecting rod adapter / compatible RAM

Read more less

Features1. Wide compatibility, and it supports clamping the 4.7-6.8 inch mobile phone 2. Mechanical interlocking design, and the back slide switch can provide reinforced protection, and it can resistant to bumping roads 3. 360 degree rotation angle, and free to switch the portrait or landscape screen modes 4. It can provide three sides anti-slip silicone protection, which can protect your phone from all-round 5. Toolless operation, fast installation and easy to dismantle 6. One-hand operation, push and take the phone out easily, safe and convenient.Specification1. Model: JR-ZS264 2. Name: Funny phone mount(For bicycle/motorcycle) 3. Material: ABS 4. Handlebar diameter: Less than or equal 28mm 5. Applicable size: 4.7-6.8 inches 6. Net weight: 180g

Read more less

1. No tools, simple installation. 2. After installation, pull the chuck to rotate 360 degrees. 3. Suitable for placing water cups for bicycles, strollers, wheelchairs or other equipment. 4. The chuck is made of nylon ABS material, which is durable and wear-resistant. 5. The mouth of the water cup can be retracted manually, and the diameter of the applicable water cup and kettle is 5.7-7.2cm. 6. Material: ABS + nylon

Read more less

1. It can be rotated 360 degrees at will, and the horizontal screen and vertical screen of the mobile phone can be switched at will according to needs. 2. The chuck is added with a silicone patch, which is stable and non-slip and avoids scratching the phone and does not block the earphone hole. 3. The four corners of the chuck are designed with eagle claws, and the clamping is more stable, and there will be no slippery phenomenon on bumpy roads. 4. The height of the chuck is 1.2cm, and the mobile phone can be used normally with the mobile phone protective cover, so there is no need to worry about the problem that the mobile phone case cannot be stuck. 5. It can be used without installation and opening. It is also equipped with a hexagonal wrench for tight adjustment, which is safe and at the same time anti-theft. 6. Suitable for 4-6.5 inch mobile phones.

Read more less

1. Made of ABS material, environmentally friendly and durable. 2. Buckle structure, convenient for express disassembly and installation. 3. Suitable for smartphones and tablets within 4-10.5 inches. 4. Multiple contact surfaces are protected by silica gel to protect the phone from scratches. 5. Material: ABS+silicone

Read more less

1. Material: elastic silicone2. Weight: 35 grams3. Suitable for 4.0-6.5 inch mobile phone screen4. Dimensions: unstretched length 12.5 cm, width 6.5 cm5. Four-sided spider web structure, violent shaking and not afraid of the phone slipping6. Do not block the screen buttons, reserve a charging port, which is more convenient to use7. Can be rotated 360 degrees horizontally to ensure seamless switching between horizontal and vertical screens of the mobile phone8. Snap-in fixing, quick installation9. Freely adjustable, suitable for different pipe diameters

Read more less

1. Material: elastic silicone2. Weight: 35 grams3. Suitable for 4.0-6.5 inch mobile phone screen4. Dimensions: unstretched length 12.5 cm, width 6.5 cm5. Four-sided spider web structure, violent shaking and not afraid of the phone slipping6. Do not block the screen buttons, reserve a charging port, which is more convenient to use7. Can be rotated 360 degrees horizontally to ensure seamless switching between horizontal and vertical screens of the mobile phone8. Snap-in fixing, quick installation9. Freely adjustable, suitable for different pipe diameters

Read more less

1. Material: elastic silicone2. Weight: 35 grams3. Suitable for 4.0-6.5 inch mobile phone screen4. Dimensions: unstretched length 12.5 cm, width 6.5 cm5. Four-sided spider web structure, violent shaking and not afraid of the phone slipping6. Do not block the screen buttons, reserve a charging port, which is more convenient to use7. Can be rotated 360 degrees horizontally to ensure seamless switching between horizontal and vertical screens of the mobile phone8. Snap-in fixing, quick installation9. Freely adjustable, suitable for different pipe diameters

Read more less

1. Material: elastic silicone2. Weight: 35 grams3. Suitable for 4.0-6.5 inch mobile phone screen4. Dimensions: unstretched length 12.5 cm, width 6.5 cm5. Four-sided spider web structure, violent shaking and not afraid of the phone slipping6. Do not block the screen buttons, reserve a charging port, which is more convenient to use7. Can be rotated 360 degrees horizontally to ensure seamless switching between horizontal and vertical screens of the mobile phone8. Snap-in fixing, quick installation9. Freely adjustable, suitable for different pipe diameters

Read more less

1. Material: elastic silicone2. Weight: 35 grams3. Suitable for 4.0-6.5 inch mobile phone screen4. Dimensions: unstretched length 12.5 cm, width 6.5 cm5. Four-sided spider web structure, violent shaking and not afraid of the phone slipping6. Do not block the screen buttons, reserve a charging port, which is more convenient to use7. Can be rotated 360 degrees horizontally to ensure seamless switching between horizontal and vertical screens of the mobile phone8. Snap-in fixing, quick installation9. Freely adjustable, suitable for different pipe diameters

Read more less

1. Material: aluminum alloy2. Dimensions: 15 x 9.5 cm3. Ball head size: 25 mm4. Weight: 273 grams5. Made of aluminum alloy material, strong and durable6. Light weight, small size, easy to carry and use7. Anti-slip gasket, anti-slip film, protect the phone without scratching the phone

Read more less

Features:1. The installation is simple and quick, and the disassembly saves time and effort2. The edges are smooth and comfortable, without hurting your hands3. Ingenious installation position, does not scratch the kettle4. Metal texture logo, not easy to fade5. Slightly tilted baffle design, more stable6. Thick material, sturdy and durableProduct parameters:1. Material: PC2. Applicable size: suitable for kettles with a diameter of 6-7 cm3. Dimensions: 14 x 7.5 cm4. Net weight: 37.5 grams

Read more less

Features:1. The installation is simple and quick, and the disassembly saves time and effort2. The edges are smooth and comfortable, without hurting your hands3. Ingenious installation position, does not scratch the kettle4. Metal texture logo, not easy to fade5. Slightly tilted baffle design, more stable6. Thick material, sturdy and durableProduct parameters:1. Material: PC2. Applicable size: suitable for kettles with a diameter of 6-7 cm3. Dimensions: 14 x 7.5 cm4. Net weight: 37.5 grams

Read more less

Features:1. The installation is simple and quick, and the disassembly saves time and effort2. The edges are smooth and comfortable, without hurting your hands3. Ingenious installation position, does not scratch the kettle4. Metal texture logo, not easy to fade5. Slightly tilted baffle design, more stable6. Thick material, sturdy and durableProduct parameters:1. Material: PC2. Applicable size: suitable for kettles with a diameter of 6-7 cm3. Dimensions: 14 x 7.5 cm4. Net weight: 37.5 grams

Read more less

1. Comes with tire lever, adjustable screw hole2. Free adjustment, installation screw hole3. Simple and quick installation, convenient disassembly and assembly, saving time and effort4. Rounded edges, not easy to scratch5. Simple and generous, firm fit6. Features: solid and reliable, durable, integral molding, simple installation, thick material7. Material: Nylon crowbar/ABS bottle cage8. Weight: 63.5g9. Size: 14.5x8cm

Read more less

1. Multi-functional bracket, it can be installed with code watch, mobile camera, mobile phone and flashlight. 2. Easy to install. 3. Durable and reliable. 4. Material: aluminum alloy, engineering plastic. 5. Size: 8 x 4.2 x 2cm

Read more less

1. Multi-functional bracket, it can be installed with code watch, mobile camera, mobile phone and flashlight. 2. Easy to install. 3. Durable and reliable. 4. Material: aluminum alloy, engineering plastic. 5. Size: 8 x 4.2 x 2cm

Read more less

1. It has bottom support, so that your love machine can be fully protected. Multi-point anti-shock and anti-scratch silicone pad protect your phone. 2. Phone holder is suitable for mobile phone size with a large adjustment range, which has a 65-100mm adjustable range, and the thickness does not exceed 10mm. 3. 360-degree horizontal rotation for comfortable vision. the rotation angle can be adjusted as you. 4. Aluminum alloy CNC processing oxidation process makes the stand light and durable. 5. Can be installed on the tube handles of electric bikes, bicycles, motorcycles, and scooters.

Read more less

1. Material: ABS2. Purpose: bicycle mobile phone holder3. Applicable mobile phone size: about 7-10 cm wide mobile phone4. Weight: about 164.8g/piece for handlebar installation and 184.3g/piece for rearview mirror installation5. Size: about 11x7 cm/pieceFeatures:1. Fast clamping, can be operated with one hand, convenient and fast2. The mechanical spring is locked, stable and not easy to fall off3. High-strength ABS material, sturdy and durable4. The base is designed with a universal ball, which can freely adjust the angle of the phone holder5. High-density sponge cushion, cushioning and shock absorption, does not damage the phone

Read more less

1. Material: ABS2. Purpose: bicycle mobile phone holder3. Applicable mobile phone size: about 7-10 cm wide mobile phone4. Weight: about 164.8g/piece for handlebar installation and 184.3g/piece for rearview mirror installation5. Size: about 11x7 cm/pieceFeatures:1. Fast clamping, can be operated with one hand, convenient and fast2. The mechanical spring is locked, stable and not easy to fall off3. High-strength ABS material, sturdy and durable4. The base is designed with a universal ball, which can freely adjust the angle of the phone holder5. High-density sponge cushion, cushioning and shock absorption, does not damage the phone

Read more less

1. Material: ABS, polyester silk cloth2. Purpose: mobile phone holder3. Application: bicycles, electric motorcycles4. Applicable mobile phone size: mobile phone with a width of about 7-10 cm5. Weight: about 200 grams for handlebar installation, and about 220 grams for rearview mirror installation6. Dimensions: the stand is about 13x14.2 cm, and the umbrella is about 27.5x27 cm.Features:1. Small umbrella with 8 reinforced skeletons, firm and stable2. The inner layer of the small umbrella is silver matt rubber to block ultraviolet rays, and the outer layer is water-repellent and anti-penetration.3. One-button clamping design, which can be operated by one hand, which is convenient and quick4. The mechanical spring is locked, and it is stable5. High-strength ABS material, sturdy, scratch-resistant, and stable6. 360-degree rotation adjustment, base universal ball design, freely adjust the angle of the phone holder7. The loose screw is easy to install, firm and stable8. High-density sponge pad, non-slip and shock-absorbing, does not damage the phone

Read more less

1. Material: ABS, polyester silk cloth2. Purpose: mobile phone holder3. Application: bicycles, electric motorcycles4. Applicable mobile phone size: mobile phone with a width of about 7-10 cm5. Weight: about 200 grams for handlebar installation, and about 220 grams for rearview mirror installation6. Dimensions: the stand is about 13x14.2 cm, and the umbrella is about 27.5x27 cm.Features:1. Small umbrella with 8 reinforced skeletons, firm and stable2. The inner layer of the small umbrella is silver matt rubber to block ultraviolet rays, and the outer layer is water-repellent and anti-penetration.3. One-button clamping design, which can be operated by one hand, which is convenient and quick4. The mechanical spring is locked, and it is stable5. High-strength ABS material, sturdy, scratch-resistant, and stable6. 360-degree rotation adjustment, base universal ball design, freely adjust the angle of the phone holder7. The loose screw is easy to install, firm and stable8. High-density sponge pad, non-slip and shock-absorbing, does not damage the phone

Read more less

1. Material: ABS, polyester silk cloth2. Purpose: mobile phone holder3. Application: bicycles, electric motorcycles4. Applicable mobile phone size: mobile phone with a width of about 7-10 cm5. Weight: about 200 grams for handlebar installation, and about 220 grams for rearview mirror installation6. Dimensions: the stand is about 13x14.2 cm, and the umbrella is about 27.5x27 cm.Features:1. Small umbrella with 8 reinforced skeletons, firm and stable2. The inner layer of the small umbrella is silver matt rubber to block ultraviolet rays, and the outer layer is water-repellent and anti-penetration.3. One-button clamping design, which can be operated by one hand, which is convenient and quick4. The mechanical spring is locked, and it is stable5. High-strength ABS material, sturdy, scratch-resistant, and stable6. 360-degree rotation adjustment, base universal ball design, freely adjust the angle of the phone holder7. The loose screw is easy to install, firm and stable8. High-density sponge pad, non-slip and shock-absorbing, does not damage the phone

Read more less

1. Material: ABS, polyester silk cloth2. Purpose: mobile phone holder3. Application: bicycles, electric motorcycles4. Applicable mobile phone size: mobile phone with a width of about 7-10 cm5. Weight: about 200 grams for handlebar installation, and about 220 grams for rearview mirror installation6. Dimensions: the stand is about 13x14.2 cm, and the umbrella is about 27.5x27 cm.Features:1. Small umbrella with 8 reinforced skeletons, firm and stable2. The inner layer of the small umbrella is silver matt rubber to block ultraviolet rays, and the outer layer is water-repellent and anti-penetration.3. One-button clamping design, which can be operated by one hand, which is convenient and quick4. The mechanical spring is locked, and it is stable5. High-strength ABS material, sturdy, scratch-resistant, and stable6. 360-degree rotation adjustment, base universal ball design, freely adjust the angle of the phone holder7. The loose screw is easy to install, firm and stable8. High-density sponge pad, non-slip and shock-absorbing, does not damage the phone

Read more less

1. Material: ABS, polyester silk cloth2. Purpose: mobile phone holder3. Application: bicycles, electric motorcycles4. Applicable mobile phone size: mobile phone with a width of about 7-10 cm5. Weight: about 200 grams for handlebar installation, and about 220 grams for rearview mirror installation6. Dimensions: the stand is about 13x14.2 cm, and the umbrella is about 27.5x27 cm.Features:1. Small umbrella with 8 reinforced skeletons, firm and stable2. The inner layer of the small umbrella is silver matt rubber to block ultraviolet rays, and the outer layer is water-repellent and anti-penetration.3. One-button clamping design, which can be operated by one hand, which is convenient and quick4. The mechanical spring is locked, and it is stable5. High-strength ABS material, sturdy, scratch-resistant, and stable6. 360-degree rotation adjustment, base universal ball design, freely adjust the angle of the phone holder7. The loose screw is easy to install, firm and stable8. High-density sponge pad, non-slip and shock-absorbing, does not damage the phone

Read more less

1. High quality material, durable and long service life 2. Waterproof and dustproof 3. Ensure the stability of rearview mirror 4. Unique design and smooth surface 5. Easy to install and remove

Read more less

1. Material: carbon fiber 2. Fits for the kettle with a diameter of 72-74mm. 3. Bike Type: Mountain/Road Bike 4. Weight: about 26g 5. Super strong yet light weight. easy to operate.

Read more less

1. Material: carbon fiber 2. Fits for the kettle with a diameter of 72-74mm. 3. Bike Type: Mountain/Road Bike 4. Weight: about 26g 5. Super strong yet light weight. easy to operate.

Read more less

1. Material: carbon fiber 2. Fits for the kettle with a diameter of 70-73mm. 3. Bike Type: Mountain/Road Bike 4. Weight: about 40g 5. Super strong yet light weight. easy to operate.

Read more less