DJI & GoPro Accessories

Lens screen protector:1. Protects the camera lens and monitor from accidental bumps and scratches.2. With the lens screen protector on, it is easy to for ONE X2 camera in your pocket or backpack for safe and easy travel.3. Non-slip design on both sides to prevent slippage and easy to put on and take off4. Material: silicone5. Note: The product only includes the protective case, no other6. Weight: 7gBody protector:1. Effective protection for the camera and does not affect the normal use of photography2. Can be used with the lens protector, double insurance more secure 3. Precise hole position, protect the protection function at the same time does not affect the use4. Silicone case is drop and scratch resistant, with a beautiful and generous surface sprayed with oil, comfortable to the touch5. Pre-positioned lanyard hole, use with the included lanyard to prevent loss6. Easy to remove, roll up the case from the bottom of the body to remove it7. Note: the product only includes the protective case, no other8. Material: silicone9. Weight: 23g

Read more less

Lens screen protector:1. Protects the camera lens and monitor from accidental bumps and scratches.2. With the lens screen protector on, it is easy to for ONE X2 camera in your pocket or backpack for safe and easy travel.3. Non-slip design on both sides to prevent slippage and easy to put on and take off4. Material: silicone5. Note: The product only includes the protective case, no other6. Weight: 7gBody protector:1. Effective protection for the camera and does not affect the normal use of photography2. Can be used with the lens protector, double insurance more secure 3. Precise hole position, protect the protection function at the same time does not affect the use4. Silicone case is drop and scratch resistant, with a beautiful and generous surface sprayed with oil, comfortable to the touch5. Pre-positioned lanyard hole, use with the included lanyard to prevent loss6. Easy to remove, roll up the case from the bottom of the body to remove it7. Note: the product only includes the protective case, no other8. Material: silicone9. Weight: 23g

Read more less

1. Precision fit, panoramic camera precision fit, easy to install, all-round fit, protect the camera from damage2. Real camera cutout, not covering the buttons, battery compartment, pickup holes, completely avoiding the side buttons, not covering any holes or buttons on the camera3. Suitable for Insta360 One X34. Material: PC5. Use: protect the camera6. Size: 12x5x7cm7. Weight: 65g8. Note: The product contains only the border and nothing else

Read more less

1. Material: ABS2. One-piece molding, higher firmness3. Silicone lining, non-slip and stable, without damaging the remote control4. Height and angle can be adjusted freely, easy to use5. Opening and closing 190 mm (MAX), 4-12 inches mobile phone and tablet PC can be used6. Weight: 185 grams7. Note: only the stand, not including the remote control and tablet

Read more less

1. Multi-angle shooting Vertical and horizontal view, 180 degree rotation shooting, quick release, easy to view playback.2. Magnetic neck mount accessory, magnetic plate can be invisible, enjoy hands-free shooting and get POV images easily.3. Super strong magnetic adhesion, firmly adsorbed, when you are in sports or doing other outdoor activities, you can shoot POV images at will.4. Small and practical, it can be used with magnetic plates or mounted on any iron surface for shooting.5. Versatile compatibility: it is compatible with a variety of sports cameras and smartphones.6. Lanyard: 340-610 mm7. Magnetic plate: 85 x 55 x 28mm8. Product weight: 70g9. Load capacity: 300g10. Material: PC plastic, stainless steel, NdFeb strong magneticPacking list:Ordinary suit:Magnetic mount x 1Magnetic board x 1Locking screw x 1Expansion set:Magnetic mount x 1Magnetic board x 1Locking screw x 1Selfie stick adapter x 1Nano silicone assembly x 1

Read more less

1. When riding in the field, you can attach the DJI RC remote control to the handlebars and control the remote control while riding.2. CNC machined aluminium remote control bracket, high strength and hardness, durable and more secure3. without the aluminium remote control mount, it can also be used as a separate sports camera clip to hold cameras for ACTION 2/GoPro series/Insta360 series4. Screw locking, stable installation, tightly clamping the remote control is not easy to loose, peace of mind riding and shooting5. Free angle adjustment6. Double-headed rotatable metal quick release firmware, quick and easy to install7. Suitable for bicycles, scooters, electric vehicles, etc.8. Built-in anti-slip cushion for a more secure grip and effective protection against scratches on handlebars9. Applicable models: Suitable for Mini 3/Mini 3 Pro/ Mavic 310. Applicable tube diameter: 22-26mm11. Note: the product only includes the bracket, no other12. Material: aluminium alloy + plastic13. Gross weight: 159g

Read more less

1. Miniature and exquisite appearance, but also effective shading without light leakage, lightweight and portable2. Soft silicone edging for smooth operation without pinching, a thoughtful and user-friendly design3. Tailor-made, non-destructive shading. Does not block the screen, does not affect the touch screen, does not affect the control of the joystick4. Detachable, easy to fold the hood, comes with a storage buckle, easy to store. No need to remove the stand5. Effective light blocking, no reflections on the screen, clear flight view6. Strong magnetic adsorption, both ends of the shade, you can choose the right shade according to the actual angle needs7. High strength collapsible metal lanyard, easy to attach lanyard, threaded locking, tight and secure8. Suitable for Mini 3 Pro / Mavic 3 / Classic / Air 2S / RC PRO9. Sturdy, silky smooth and splash-proof10. Velvet lining to reduce screen reflection and make the screen clearer11. Precise cut-out for non-destructive operation12. Material: Silicone13. Note: The product only includes the protective case, nothing else is included.14. Unfolded size: 148x100x90mm15. Folded size: 145x95mm16. Net weight: 69g17. Gross weight: 140g

Read more less

1. Material: plastic2. For DJI Osmo Pocket3. Precisely control the movement of the gimbal, the multi-function button can switch the gimbal mode and control the gimbal to return to the center, making shooting more flexible4. With functions such as quick mode switching and gimbal lock5. Dimensions: 44.9x30.5x22.7mm6. Weight: 9.7 gramsPacking list:-Gimbal control wheel x 1

Read more less

1. High quality silicone case designed for GoPro HERO11 Black Mini2. It helps to prevent dust, smudges and scratches on the camera.3. Real camera open mold, fit and protect, easy to take and easy to put4. Note: Only the case is included, not the camera5. Product net weight: 15 grams6. Product size: 6.5 x 5 x 4CM

Read more less

1. A new positioning column is added to the quick release adapter, which greatly improves the impact resistance2. The plane bonding base has a larger bonding area and stronger strength. With the help of a large area of adhesive on the bottom, the camera can be fixed to sports equipment such as surfboards and snowboards. It is stable and does not fall off, and is suitable for various high-intensity sports scenes3. Dimensions of quick release adapter: length 40.2mm, width 21mm, height 34.2mm4. Quick release adapter weight: 16 grams5. Dimensions of flat bonding base: diameter 59.7mm, height 29.33mm6. Weight of flat bonding base: 20.7 grams7. Locking screw dimensions: length 55.6 mm, width 23 mm, height 13.3 mm8. Locking screw weight: 20.7 gramsKind tips:1. Do not hit, crush or throw this product violently, otherwise there will be a risk of falling off and damage2. The ideal paste temperature for flat bonding base is -10°C to 40°C3. Do not paste on curved surfaces, and make sure the surface of the pasted object is clean4. It is recommended to use after pressing for 10 seconds and resting for 30 minutesPacking list:- Quick release adapter x 1- Locking screw x 1- Flat adhesive base x 1

Read more less

1. For DJI RS 3 Mini/DJI RS 3 Pro/DJI RS 3/DJI RS 2/DJI RSC 22. Clamp and fix the mobile phone, three-stage design3. Comes with NATO interface, cold shoe and 1/4-20 threaded interface4. When you need to install the mobile phone on the side of the stabilizer to monitor the image screen, you can use the mobile phone clip to fix the mobile phone5. It can be rotated horizontally and vertically to meet the different needs of mobile phone horizontal and vertical screen monitoringPacking list:- Phone clip x 1

Read more less

1. Material: PC2. Compatible models: for Insta360 X33. Durable, resistant to surfing pressure will not destroy its photographic effects4. Full body underwater waterproof design, ideal for diving, snorkeling, swimming and other water sports.5. Protective shell sealing, not only better waterproof, more effective in preventing fine dust from entering the camera.

Read more less

1. Made of high quality carbon fiber, high strength and 1/3 lighter than aluminum selfie stick of the same size.2. The handle is wrapped by food-grade silicone with non-slip texture, making it comfortable for every use.3. After bearing the weight, it can be restored to its original shape without deformation under long-term use.4. 5 sections are retractable and can be freely locked between each section5. 1/4 threaded interface at the bottom of the selfie stick, can be installed tripod base.6. Suitable for Gopro, insta360, DJI, and other action cameras, smart phones.7. Material: 24T carbon cloth, aluminum alloy, silicone8. Weight capacity: 0.3kg9. Size: 32cm-120cm10. Weight: 146g

Read more less

1. For DJI Pocket 22. Foldable design, compact and portable3. Help stabilize the stand on the plane, convenient for shooting4. Ball head design, can be fixed on the slope5. Can be stored in a protective case6. 68.1x18.5x25 mm (stored state)7. 117.6x117.6x25 mm (extended state)8. Weight: 26.6 grams

Read more less

1. For Osmo Action 3, DJI Action 2, Osmo Action2. Support 360-degree rotating viewing angle to realize multi-angle viewing3. Simple installation, no tools required4. The pipe diameter is adjustable to suit different models5. Can be used for round handlebars with a diameter of 8mm to 16mm, 22mm to 35mm, not 6. Support non-round handlebars such as broken wind bars7. Handlebar clamp size: length 182.31mm, width 72.96mm, height 25.60mm8. Handlebar clip weight: 149 grams9. Locking screw size: length 55.6mm, width 23mm, height 13.3mm10. Locking screw weight: 11.2 gramsPacking list:- Handlebar clip x 1- Locking screw x 1

Read more less

1. Using AGC professional optical glass, double-sided super waterproof and anti-fouling, anti-scratch coating2. The frame is made of aerospace grade aluminum, ultra-light and strong corrosion resistance3. CNC machining high-precision adaptation, does not affect the gimbal calibration flight stability4. UV protection mirror: filter UV and stray light, showing a more realistic color; prevent direct contact between dust, oil, fingerprints and the lens, effectively protect the lens5. NDPL: integration of ND and PL lenses, while meeting the degree of exposure reduction and elimination of non-metallic reflections two needs; ND value is larger, the greater the degree of light reduction, the darker the picture 6. CPL: mainly used to eliminate harmful non-metallic reflective light, increase color concentration, improve the clarity and expression of the picture7. ND scrim: to prevent overexposure in bright environments, to resist scattered light, the greater the value of ND, the higher the degree of light reductionNote: This filter is for DJ MINI 3, MINI 3 PRO is not applicable!

Read more less

1. Using AGC professional optical glass, double-sided super waterproof and anti-fouling, anti-scratch coating2. The frame is made of aerospace grade aluminum, ultra-light and strong corrosion resistance3. CNC machining high-precision adaptation, does not affect the gimbal calibration flight stability4. UV protection mirror: filter UV and stray light, showing a more realistic color; prevent direct contact between dust, oil, fingerprints and the lens, effectively protect the lens5. NDPL: integration of ND and PL lenses, while meeting the degree of exposure reduction and elimination of non-metallic reflections two needs; ND value is larger, the greater the degree of light reduction, the darker the picture 6. CPL: mainly used to eliminate harmful non-metallic reflective light, increase color concentration, improve the clarity and expression of the picture7. ND scrim: to prevent overexposure in bright environments, to resist scattered light, the greater the value of ND, the higher the degree of light reductionNote: This filter is for DJ MINI 3, MINI 3 PRO is not applicable!

Read more less

1. Using AGC professional optical glass, double-sided super waterproof and anti-fouling, anti-scratch coating2. The frame is made of aerospace grade aluminum, ultra-light and strong corrosion resistance3. CNC machining high-precision adaptation, does not affect the gimbal calibration flight stability4. UV protection mirror: filter UV and stray light, showing a more realistic color; prevent direct contact between dust, oil, fingerprints and the lens, effectively protect the lens5. NDPL: integration of ND and PL lenses, while meeting the degree of exposure reduction and elimination of non-metallic reflections two needs; ND value is larger, the greater the degree of light reduction, the darker the picture 6. CPL: mainly used to eliminate harmful non-metallic reflective light, increase color concentration, improve the clarity and expression of the picture7. ND scrim: to prevent overexposure in bright environments, to resist scattered light, the greater the value of ND, the higher the degree of light reductionNote: This filter is for DJ MINI 3, MINI 3 PRO is not applicable!

Read more less

1. Using AGC professional optical glass, double-sided super waterproof and anti-fouling, anti-scratch coating2. The frame is made of aerospace grade aluminum, ultra-light and strong corrosion resistance3. CNC machining high-precision adaptation, does not affect the gimbal calibration flight stability4. UV protection mirror: filter UV and stray light, showing a more realistic color; prevent direct contact between dust, oil, fingerprints and the lens, effectively protect the lens5. NDPL: integration of ND and PL lenses, while meeting the degree of exposure reduction and elimination of non-metallic reflections two needs; ND value is larger, the greater the degree of light reduction, the darker the picture 6. CPL: mainly used to eliminate harmful non-metallic reflective light, increase color concentration, improve the clarity and expression of the picture7. ND scrim: to prevent overexposure in bright environments, to resist scattered light, the greater the value of ND, the higher the degree of light reductionNote: This filter is for DJ MINI 3, MINI 3 PRO is not applicable!

Read more less

1. Using high-strength gorilla glass2. Wear-resistant and scratch-resistant3. Prevent foreign objects from entering and provide comprehensive protection for the lens4. AF coating is hydrophobic and oil-resistant, easy to clean5. Compatible with Osmo Action 36. Dimensions: Length 32.4mm, Width 32.4mm, Height 6.9mm7. Weight: 7.8 grams

Read more less

1. Through the DJI Ronin image transmission, the following functions can be realized: smart follow 3.0, mobile phone somatosensory control, virtual joystick control gimbal, manual focus, adjust gimbal parameters, adjust camera exposure parameters, etc.2. Connect the camera to the DJI Ronin video transmission via an HDMI cable, and connect the mobile phone to the DJI Ronin video transmission via Wi-Fi, and then you can view the camera shooting screen on the Ronin app3. When DJI RS 2 or DJI RS 3 Pro is used with DJI Ronin video transmission, you can also view the camera shooting screen on the screen of the gimbal body4. Note: When the DJI RS 3 or DJI RSC 2 is used with the DJI Ronin video transmission, the screen of the gimbal body does not support viewing the camera shooting screen, you can view it through the Ronin app5. Working frequency: 2.400-2.4835 GHz, 5.725-5.850 GHz6. Transmission power (EIRP): 2.400-2.4835 GHz: <25 dBm (FCC) <20 dBm (CE/SRRC/MIC); 5.725-5.850 GHz: <25 dBm (FCC/SRRC),<14dBm (CE)7. Dimensions: 8.2 x 6.3 x 2.4 cm8. Weight: 126 grams9. Compatible products: DJI RS 3 Pro, DJI RS 3, DJI RS 2, DJI RSC 2packing list:-Video Transmitter × 1-Cold shoe to 1/4''-20 screw hole adapter × 1-USB-C cable (40cm) × 1-USB-C to USB-C cable (20 cm) × 1-USB-C port to A port HDMI cable (20 cm) × 1-USB-C port to C port HDMI cable (20 cm) × 1-USB-C port to D port HDMI cable (20 cm) × 1-M4 screw (10 mm) × 2-Wrench (3 mm) × 1

Read more less

1. Nano rubber base with ball head design, easy to fix the camera on the car roof, windows and other objects at different angles of the surface2. After removing the nano-adhesive base, you can also use the bottom 1/4inch threaded hole to transfer tripod, extension pole and other accessories3. Nano rubber base can be reused after washing, convenient to fix the camera at hand4. Warm tips:- Do not paste the nano adhesive base to the surface with oil, water, dust, dirt or rough particles (such as powder and skin off the wall, or with dust, gravel floor, etc.) to avoid falling off due to poor adhesion- When used under strenuous movement, it is recommended to use with magnetic adapter, quick release connector and curved adhesive base.5. Applicable products: DJI Action 26. Weight: about 60g7. Size: about 5.3 x 4.2 x 4.2cm

Read more less

1. For Osmo Mobile 6, Osmo Mobile SE, DJI OM 5, DJI OM 4 SE, DJI OM 4, Osmo Mobile 3, Osmo Mobile 22. Equipped with 1/4-20 screws to effectively expand the use function3. The handle adopts non-slip design and soft rubber material, which feels comfortable4. The tripod can be quickly retracted, small and easy to carry5. Dimensions (closed): Length 138mm, Diameter 32mm6. Weight: 72 gramsPacking list:- DJI OM Handheld Tripod x 1

Read more less

1. After connecting the traditional sports camera accessories, the magnetic snap structure is firmly attached to the main camera, ensuring stability and safety even in strenuous sports scenarios2. Compatible with most traditional sports camera accessories3. Compatible products: DJI Action 24. Weight: about 23g5. Size: approx. 4 x 2.9 x 2.1cm

Read more less

1. Lighter weight, smaller storage size and a carry handle for tool-free mounting to the NATO port2. Handle with its own cool shoe and 1/4 expansion port for external monitor support and low angle shooting3. Compatible with DJI RS 3 / RS 3 Pro / RS 2 / RSC 24. Storage size: 192x40x64mm5. Weight: 210g

Read more less

1. Viscose base with ball head design, the camera can be installed anywhere2. The lens orientation can be adjusted flexibly, and the angle is novel and changeable3. More accessories can be transferred through the bottom 1/4 threaded hole4. Note: Do not paste on curved surfaces, and make sure the surface of the pasted object is clean. It is recommended to use it after pressing for 10 seconds and standing for 30 minutes5. Dimensions: 3.98 x 3.98 x 5.14 cm6. Weight: 49 grams7. Compatible products: Osmo Action 3, DJI Action 2Packing list:-Magnetic ball head assembly × 1

Read more less

1. Adopt O3 Pro technology, with 6km long-range transmission distance at the ground end2. Add DFS band to the original 2.4GHz and 5.8GHz bands, support AES 256-bit encryption algorithm, can output 1080p/60fps full HD images to multiple map transmitter highlight monitors at the same time, security, stability and anti-interference ability are greatly improved3. DJI Ronin 4D transmitter needs to be used with DJI highlight monitor.4. Applicable products: DJI Ronin 4D5. Features:- 6km long-distance transmission- Low latency experience- Remote control- All-in-one designPacking list:- Fuselage map transmitter x 1- Ronin antenna x 4- 3mm ball-head hexagonal wrench x 1- M4-19 hexagon socket head screws x 3

Read more less

1. Three for Tello flight batteries can be connected. When in use, the Battery Manager will charge the batteries in descending order according to the flight battery voltage2. The battery manager is only suitable for use with the extended charging port, no charger is included, please use the designated charger to power the Battery Manager3. Applicable battery type: GB1-1100mAh-3.8V4. Operating ambient temperature: 5~45 degrees celsius5. Input voltage: 5 V6. Input current: 3 A7. Charging time (three flight batteries): approx. 2 hours8. Compatible products: for Tello flight batteries9. Weight: about 29 g

Read more less

1. It needs to be used with the specified charger, and the battery charging port can be expanded to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.2. Compatible products:-Suitable for DJI Mavic 3 Intelligent Flight Battery-Suitable for DJI 65W Portable Charger-Suitable for DJI 65W car charger3. Working environment temperature: 5-40 degrees Celsius4 Inputs: 5-20V, 5A(MAX)5. Charging time:-With 65W portable charger: about 1 hour 36 minutes (single battery)-With 65W car charger: about 1 hour 36 minutes (single battery)6. Warm Tips: Charger is not included.

Read more less

1. Wireless transmission, free from wire constraints2. Small and convenient, easy to carry3. A windproof wool cover can be installed to reduce wind noise4. Ultra-long battery life, can be used continuously for 6 hours5. The shutter can be controlled remotely (only supported with the DJI Pocket 2 universal handle to control the Pocket 2 shutter)6. Acoustic principle: prepolarized pressure sensor7. Pickup pattern: omnidirectional8. Frequency response: 50Hz-20kHz9. External microphone input: 20Hz-20kHz10.SPL(MAX):116dBSPL(1kHz@1%THD)11. Analog input: 3.5mm input12. Applicable charger: 5V / 2A, 5V / 1A, 5V/0.5A13. Working temperature: 0-40 degrees Celsius14. Frequency band: 2.400-2.4835GHz15. Power: 2.4GHz <13dBm (FCC); <10dBm (CE); <12dBm (SRRC); <10dBm (MIC)16. Battery capacity: 320mAh lithium battery17. Charging time: 60 minutes18. Dimensions: 5 x 2.86 x 2.28 cm19. Weight: 21.4 grams20. Compatible products: DJI Pocket 2 Universal ControllerPacking list:-Wireless Microphone × 1-Windproof fleece × 1

Read more less

1. The main camera can be attached to the main camera through the magnetic buckle, which is convenient for shooting2. When used in combination, DJI Action 2 has a battery life of up to 180 minutes, allowing you to enjoy the fun of shooting3. Comes with a microSD card slot, which can expand the external microphone and support hot swap4. Precautions: The endurance module is neither waterproof nor dustproof5. Built-in battery: LiPo 2S 1300 mAh6. Energy: 5 Wh7. Voltage: 7.7V8. Ambient temperature: 0-40 degrees Celsius9. Charging ambient temperature: 5-60 degrees Celsius10. Working time: 180 minutes11. Charging time: 90 minutes12. Video resolution: 1080p/30fps (measured when the electronic stabilization function is turned off, for reference only)13. Dimensions: 3.9 x 4.16 x 2.14mm14. Weight: 56.6 grams15. Compatible products: DJI Action 2Packing list:- battery life module × 1

Read more less

1. Adjustable double ball head design, supports 360° rotation lens orientation2. Strong suction, support recycling, and can protect the adsorption surface3. Reminder: This product is limited to adsorption on clean, flat, non-porous surfaces, and is only suitable for non-impact activities. When adsorbed on the outside of vehicles such as cars and motorcycles, it can only be used on flat roads in cities and towns, and the speed of the vehicle should be strictly controlled below 80 km/h. At the same time, it is recommended to use it with a safety rope to avoid accidents4. Dimensions: Suction Cup: 13.71 x 9.35 x 8.5 cm, Screw: 5.56 x 2.3 x 1.33 cm5. Weight: Suction Cup: 148g, Screw: 11.2g6. Compatible products: Osmo Action 3, DJI Action 2, Osmo ActionPacking list:-Suction cup × 1-Screw × 1

Read more less

1. It needs to be used with the specified charger, and the battery charging port can be expanded to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.2. Connect 100W portable charger or car charger to use3. Adapted products:-Suitable for DJI Mavic 3 Intelligent Flight Battery-Suitable for DJI 100W Desktop Charger-Suitable for DJI 65W Portable Charger-Suitable for DJI 65W car charger4. Working environment temperature: 5-40 degrees Celsius5. Input: 5-20V, 5A(MAX)6. Charging time:-With 100W desktop charger: about 1 hour 10 minutes (single battery)-With 65W portable charger: about 1 hour 36 minutes (single battery)-With 65W car charger: about 1 hour 36 minutes (single battery)7. Warm Tips: Charger is not included.

Read more less

1. The position of the camera is close to the angle of human eyes. When riding low-lying, the camera still faces forward to shoot2. Easy loading and unloading, suitable for various helmets3. Dimensions: Chin Fitting: 9.82 x 43.1 x 5 cm, Screw: 5.56 x 2.3 x 1.33 cm4. Weight: Chin Fitting: 48g, Screw: 11.2g5. Compatible products: Osmo Action 3, DJI Action 2, Osmo ActionPacking list:-Helmet Chin Fitting × 1-Locking screw × 1

Read more less

1. 8K video recording can be installed on DJI Ronin 4D body via PROSSD card compartment2. 8K format recording3. No card reader, plug and play4. Packing list: PROSSD 1TB x 1, USB-C to USB-C data cable x 15. Compatible products: DJI Ronin 4D

Read more less

1. Intelligent flight battery: the battery life can last up to 46 minutes (longest), providing ample space for framing and composition, allowing you to say goodbye to battery life anxiety, enjoy your flight, and return with a full load.2. 100W charging hub: can expand the battery charging port to 3. According to the order of remaining power from high to low, the connected batteries can be intelligently charged in sequence, eliminating the trouble of plugging and unplugging one by one when charging multiple batteries.3. 65W car charger: Use it to charge various devices in the car. It can stably output 65 watts of power, and has two output ports of USB-C and USB-A, which can charge the battery and remote control at the same time; it also supports PPS and PD protocols, which can charge mobile phones, computers and other devices.4. Noise-reducing propeller: Each blade has passed a precise dynamic balance test, with low flying noise and high aerodynamic efficiency.5. Shoulder bag: Small and convenient, fast storage, inside can accommodate Mavic 3, any remote control, four batteries and ND filter, etc.6. Adapted products:-for DJI Mavic 3 Classic-for DJI Mavic 3-for DJI Mavic 3 Cinepacking list:Smart flight battery × 2100W charging butler × 165W car charger × 1Noise reduction propellers (pair) × 3Shoulder bag × 1

Read more less

1. Magnetic fit, fast shooting, convenient and easy to use2. Shorten the focus distance, suitable for close-up shooting3. Blur the background and highlight the main body, presenting a sense of layering between virtual and real4. If you have installed the magnetic protection frame, please remove the protection frame and install it5. Reminder: Please pay attention to avoid strong shaking, otherwise it may cause the macro lens to detach from the main camera6. Dimensions: 39 x 39 x 9.4 mm7. Compatible products: DJI Action 2Packing list:-Macro lens x 1

Read more less

1. Comes with front touch screen, microSD card slot and 3 pickup holes, etc.2. The magnetic buckle structure can be firmly connected with the main camera3. When used in combination, the longest battery life of DJI Action 2 can reach 160 minutes4. Front and rear OLED touch screens with wide color gamut for easy control and viewfinder5. Support four-array microphones, audio zoom and pick-up directivity switching functions, and can also be connected to external microphones6. Reminder: The front screen expansion module is neither waterproof nor dustproof7. Display: 1.76 inches 350 ppi 500±50 cd/m2 446×4248. Video resolution: 1080p/30fps (measured when the electronic stabilization function is turned off, for reference only)9. Built-in battery: LiPo 2S 1300 mAh10. Working time: about 160 minutes11. Charging time: about 90 minutes12. Energy: 5 Wh13. Voltage: 7.7 V14. Ambient temperature: 0-40 degrees Celsius15. Charging ambient temperature: 5-60 degrees Celsius16. Dimensions: 3.9 x 4.16 x 2.46 cm17. Weight: 64 grams18. Compatible products: DJI Action 2Packing list:-Front screen expansion module × 1

Read more less

1. It can provide continuous power supply to the head for about 12 hours2. Support PD and QC 2.0 fast charge, in 24W charging specifications, 1.5 hours can be filled3. The hand-held battery is equipped with a charging port to support independent charging4. It adopts clip-type disassembly design and handle lock lever/disassembly button design, supporting double safety to prevent escape5. Model: BG30-1950 mAh-15.4 V6. Type: Lipo 4s7. Capacity: 1950 mAh8. Energy: 30.03 Wh9. Voltage: 12v-17.6 V10. Charging input voltage: 5V/2A, 9V/2a, 12V/2A, 5V/1.6A11. Suitable for DJI Rs 3pro/RS 2

Read more less

1. Screw fixed, stable and not easy to fall2. With installation tool, easy to use and fast installation3. Purpose: to mount DJI PROSSD 1TB external SSD to DJI Ronin 4D body to record 8K video4. Packing list: PROSSD card compartment x 1, M2-20 cup head hexagonal screws x 2, 1.5mm ball head hexagonal wrench x 15. Compatible products: DJI Ronin 4D

Read more less

1. Non-slip grip, comfortable hand feeling2. Hollow design, keep the camera floating in the water3. Universal interface, easy to disassemble, and can be quickly and firmly connected to the waterproof case4. The bottom 1/4 threaded hole can be transferred to tripod and other accessories5. Dimensions: 4.9 x 4.9 x 16.5 cm6. Weight: 82 grams7. Compatible products: DJI Osmo Action 3, DJI Action 2Packing list:-Floating handle x 1

Read more less

1. Camera with Multi interface (for Sony) connected to the camera shutter control interface of the DJI RS series head for camera control functions2. Each item is inspected and in good condition before delivery3. Repairing the drone is complicated, please ensure you have professional repair skills or go to a professional repair department4. Compatible products: for DJI RS 3 Mini / RS 3 Pro / RS 3 / RS 2 / RSC 25. Length: 30cm

Read more less

1. The waterproof case can be used with the DJI Action 2 main camera, or it can be used in combination when the main camera is connected to the front screen expansion module or battery life module2. Provides waterproof safety protection up to 60 meters underwater, helping you explore more underwater mysteries3. Using high-strength glass lens, the field of view is clearer4. Before using the waterproof case, it is recommended to put the waterproof case into the water for about 5 minutes for a waterproof test to ensure that the performance of the waterproof case is intact5. When in use, the power/shoot button can be triggered through the waterproof shell button6. If you have installed the magnetic protection frame, please remove the protection frame and install it7. Reminder: Please ensure that the waterproof case is dry before use (it is recommended to put anti-fog cotton sheets to prevent fogging), and the locking buckle is normal8. Dimensions: 10.8 x 6.4 x 3.3 cm9. Weight: 88 grams10. Compatible products: DJI Action 2Packing list:-Waterproof case x 1

Read more less

1. The UV mirror can prevent the coating on the surface of the lens from directly contacting the external environment, which plays a protective role; 2. PC material frame + ACG optical glass, restore the most authentic colors; 3. Waterproof and oil-proof, tempered and scratch-resistant, lotus water-proof effect, easy to clean without leaving traces; 4. The weight of each filter is only 0.7G, high-precision adaptation, will not affect flight performance; 5. UV filter specially designed for DJI Mini 3 PRO drone.

Read more less

1. Specially designed for DJI Mini 3 Pro / Mavic 3 / Air 2S / DJI RC, precise mold opening 2. High-quality PU leather fabric, it is a high grade of lycra inside, beautiful appearance and upgraded taste 3. Two-way zipper, smooth and not stuck 4. The unique plastic handle is easy to carry and can also be directly stored in the backpack 5. Dimensions: 20.5 x 28 x 8.0cm 6. Weight: 261g

Read more less

1. High quality silicone cover, special design for GoPro Hero11 Black mini. 2. Easy and convenient to use. 3. Made of flexible and soft silicone. 4. It helps to keep dust, smudges and scratches from your camera. 5. Good choice for each photographer or outdoor activities enthusiast. 6. Not include the camera.

Read more less

1. Usage: Good size protection cover for DJI Mini 3 Pro / Mavic 3 / Air 2S remote controller. 2. Useful: Can effectively prevent the rocker from waggling, scratching or scratched during transport. 3. Durable: Made of plastic, dual holes for fixed, stable, smooth and comfortable feel. 4. Convenient: Small size, lightweight and portable for your outdoor activities. 5. Note: The remote controller not included.

Read more less

1. Made of high quality ABS material, durable and sturdy 2. Suitable for DJI Mini 3 3. Small size and lightweight, without any impact on flight performance 4. Effective protect camera when quadcopter need landing on rough ground outdoor 5. Effectively raise 17mm to avoid ground debris from contaminating the body and damaging the gimbal during take-off and landing 6. Non-destructive quick disassembly design, simple disassembly, no need to worry about damaging the fuselage. 7. Note: drone and its Accessories are not included in package

Read more less