DJI Replacement Parts
For DJI Phantom 3 Gimbal Repair Parts ROLL Lower Arm
1. Suitable for DJI Phantom 3 repair parts2. Replace broken or non-working old parts with new ones3. Each item has been inspected and in good condition before shipping4. Perfectly fit and work5. Professional installation is strongly recommended. We are not responsible for any damage that may be caused to your device during the replacement of parts.
€14,65
-
For DJI Mini 3 Pro / Mini 3 Front And Rear Pivots Arm Motor Pivots, Style: Right Rear Pivot
1. Easy to install and easy to replace2. Purpose: replace broken or non-working arm shafts3. Material: metal4. Applicable products: for DJI Mini 3 Pro, Mini 35. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€10,51
-
For DJI Mini 3 Pro / Mini 3 Front And Rear Pivots Arm Motor Pivots, Style: Left Rear Pivot
1. Easy to install and easy to replace2. Purpose: replace broken or non-working arm shafts3. Material: metal4. Applicable products: for DJI Mini 3 Pro, Mini 35. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€10,58
-
Original DJI 03 Air Unit Module Lens Mounting Kit Camera Module Housing Frame(Gray)
1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame
€17,15
-
Original DJI 03 Air Unit Module Lens Mounting Kit Camera Module Housing Frame(Green)
1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame
€17,47
-
C157-2 FPV Traversing Machine Aerial Photography Motor For AVATA3.5 Rack(3750KV)
1. Bring you a better flight experience2. KV value: 37503. Internal resistance: 80 milliohms4. Shaft diameter: 1.5mm5. Working voltage: 4S6. Power: 506.56W (MAX)7. Cao pole number: 12N14P8. Motor size: 19x18.45 mm9. Silicone wire: 22# 100mm10. Weight (without wire): 13.58 grams11. Current (MAX): 31.66A
€34,41
-
For DJI Mavic AIR Gimbal Camera Replacement Repair Accessories
1. Compatible models: For DJI Mavic Air2. Replace damaged or unusable ones with new ones3. Easy-to-install replacement parts4. Every item has been inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department
€310,53
-
For DJI Spark Infrared Vision With Wiring Under Visual Repair Accessories
1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Spark5. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Weight: about 20g
€19,65
-
For DJI Phantom 4 YR ESC Board Repair Parts
1. For DJI Phantom 4/Phantom 4 Pro2. Replace damaged or unusable ones with new ones3. easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€72,86
-
For DJI Spark 3D Front Vision Obstacle Avoidance Assembly Repair Parts
1. Compatible models: for DJI Spark 2. Replace damaged or unusable ones with new ones3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€30,49
-
For DJI Mavic 2 Zoom Gimbal Camera Axial Arm Assembly
1. Compatible models: suitable for DJI Mavic 2 Pro or DJI Mavic 2 Zoom, choose according to your needs2. Replace damaged or unusable ones with new ones3. Easy-to-install replacement parts4. Every item has been inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department
€174,78
-
DJI Mini 3 Pro Body Shell Upper Cover Repair Parts
1. Compatible models: for DJI Mavic Pro2. Replace damaged or unusable ones with new ones3. Easy to install replacement parts4. Each item is inspected and in good condition before shipping.5. Repairing your drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€34,14
-
For DJI Mavic Pro Gimbal Camera Motor Arm Bracket Repair Parts
1. Compatible models: for DJI Mavic Pro 2. Replace damaged or non-functional ones with new ones3. easy to install replacement parts4. Each item is inspected and in good condition before shipping.5. Repairing your drone is complicated, please make sure you have professional repair skills, or go to a professional repair department6. Note: this model does not come with flex cable! Camera is not included
€46,78
-
for DJI Mavic Air 2S Left Rear Arm Front And Rear Machine Arm Shell Repair Accessories
1. Main material: metal, plastic2. Made of high quality material, reliable and durable3. Maintenance parts, used for accidental damage replacement, more worry-free maintenance4. Long service life and easy installation5. Main material: metal, plastic6. For Mavic Air 2S7. Net weight: 38.5 grams (left forearm), 38 grams (right forearm), 31.8 grams (left rear arm), 31.5 grams (right rear arm)8. Product size: 11.5x4.9x1.5 cm (lower shell), 12.7x7.5x2.2 cm (forearm), 12x4x2.2 cm (back arm)
€60,01
-
For DJI Mavic 3 Drone Gimbal Fixed Cover Body Shell Repair Parts
1. Gimbal fixing cover for DJI Mavic 32. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing drones is complicated, please make sure you have professional repair skills, or go to a professional repair department
€16,75
-
for DJI Mavic Air 2S Left Front Arm Front And Rear Machine Arm Shell Repair Accessories
1. Main material: metal, plastic2. Made of high quality material, reliable and durable3. Maintenance parts, used for accidental damage replacement, more worry-free maintenance4. Long service life and easy installation5. Main material: metal, plastic6. For Mavic Air 2S7. Net weight: 38.5 grams (left forearm), 38 grams (right forearm), 31.8 grams (left rear arm), 31.5 grams (right rear arm)8. Product size: 11.5x4.9x1.5 cm (lower shell), 12.7x7.5x2.2 cm (forearm), 12x4x2.2 cm (back arm)
€68,94
-
for DJI Mavic Air 2S Right Front Arm Front And Rear Machine Arm Shell Repair Accessories
1. Main material: metal, plastic2. Made of high quality material, reliable and durable3. Maintenance parts, used for accidental damage replacement, more worry-free maintenance4. Long service life and easy installation5. Main material: metal, plastic6. For Mavic Air 2S7. Net weight: 38.5 grams (left forearm), 38 grams (right forearm), 31.8 grams (left rear arm), 31.5 grams (right rear arm)8. Product size: 11.5x4.9x1.5 cm (lower shell), 12.7x7.5x2.2 cm (forearm), 12x4x2.2 cm (back arm)
€68,94
-
for DJI Phantom 3 SE Gimbal Camera Lens Repair Parts
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Phantom 3 SE5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 50 grams
€35,26
-
For DJI Inspire 2 Front Vision Obstacle Avoidance Assembly Repair Parts
1. Front vision obstacle avoidance module for DJI Inspire 22. Replace damaged or unusable ones with new ones.3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€68,94
-
for DJI Mavic Air 2S Right Rear Arm Front And Rear Machine Arm Shell Repair Accessories
1. Main material: metal, plastic2. Made of high quality material, reliable and durable3. Maintenance parts, used for accidental damage replacement, more worry-free maintenance4. Long service life and easy installation5. Main material: metal, plastic6. For Mavic Air 2S7. Net weight: 38.5 grams (left forearm), 38 grams (right forearm), 31.8 grams (left rear arm), 31.5 grams (right rear arm)8. Product size: 11.5x4.9x1.5 cm (lower shell), 12.7x7.5x2.2 cm (forearm), 12x4x2.2 cm (back arm)
€59,79
-
For DJI Mavic Mini 2 Flexible Cable Power Supply ESC Board
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Mavic mini 25. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 10 grams
€18,50
-
for DJI FPV Gimbal Camera Component Module
1. Material: ABS2. For DJI FPV3. Made of high quality material, reliable and durable4. Maintenance parts, used for accidental damage replacement, making maintenance more worry-free5. Long service life and easy installation6. Use the gimbal camera with the drone to record video at up to 4K/60fps, RockSteady EIS and 4x slow motion7. Net weight: 32.3 grams8. Product size: 5.2x4.5x3 cm
€105,19
-
for DJI Mavic Mini Small Aircraft Gimbal Camera Assembly Repair Parts
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Mavic Mini5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 100 grams
€255,79
-
for DJI Mavic 2pro/zoom Professional Zoom Edition Core Motherboard
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Mavic 2pro/zoom5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 200 grams
€317,30
-
for DJI Mavic Air 2 imu Module Disassembly Accessories
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Mavic Air 25. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: plastic8. Weight: 10 grams
€33,57
-
for DJI Phantom 4Adv/4Pro Lens IMU Motherboard
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Phantom 4Adv/4Pro5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 10 grams
€123,60
-
for DJI Mavic Pro Gimbal Camera Transmission Signal Cable
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Mavic Pro5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 10 grams
€18,09
-
for DJI Phantom 4 Pro Gimbal Camera Lens Repair Parts
1. Real machine mold opening, precise matching2. Easy to install and easy to use3. Environmental protection material, safe to use4. For DJI Phantom 4 Pro5. Repair parts, used for accidental damage replacement6. Long service life, easy to install7. Material: metal8. Weight: 50 grams
€189,28
-
Original DJI LiDAR Focus Rangefinder
1. It can achieve a detection distance of 14 meters, and a built-in camera with an equivalent focal length of 30 mm, with a wide field of view of 70 degrees2. When used with the new focus motor, the manual lens can perform automatic focus3. The target recognition and follow-up performance of intelligent follow is even better4. The laser follow focus system not only reduces the difficulty of follow focus when shooting handheld, but also does not need to rely on the texture of the object, and can also focus stably in low-light environments or complex scenes with multiple targets5. It can project 43,200 ranging points, which can meet the focus needs of most scenes6. Measured under no strong light conditions, in a normal shooting environment, the detection distance of people is 7 meters7. Image sensor resolution: touch screen display 448×2988. Field of view: 57.4 degrees (horizontal), 44.6 degrees (vertical), 70.1 degrees (diagonal)9. Equivalent focal length: 30 mm10. ToF sensor resolution: 240×18011. ToF sensor detection distance: 0.5m to 14m12. Support simultaneous recognition of 5 targets (MAX), and you can choose one of them to follow13. Recognition distance: 9 meters14. Power consumption: 6.8 watts15. Input voltage: 7V to 16V16. Dimensions: Length 66mm, Width 57mm, Height 24mm17. Weight: about 130 grams18. Mount height: 30mm19. Calibration-free lens: DZOFILM Vespid Cyber 35/50/75 mmAccessory interface:- Cold shoe interface- 1/4-20 mounting holes- USB-C interface- USB-C power/CVBS/CAN data interfacePacking list:- LiDAR Focus Rangefinder (RS) x 1- Camera Control Cable (USB-C, 30cm) x 1- LiDAR Control Cable (USB-C, 30cm) x 1
€998,89
-
Original DJI Zenmuse X9 M Bayonet Assembly
1. X9 adopts interchangeable mount design, supporting DJI DL mount and Leica M mount.2. The existing ultra-wide angle and f/0.95 super aperture lenses on these mounts can be used on the X9, so you can choose freely according to your shooting needs.3. Support the M-mount lenses in the list of lens adapters4. With the X9 follow focus motor allows manual lenses to achieve manual focus and auto follow focus function5. Packing list: M-mount adapter ring x 1, M-mount camera protection cover x 1, DX-mount lens protection cover x 16. Compatible products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K
€579,52
-
Original DJI Graphic Monitor Expansion Board (SDI / HDMI / DC-IN)(Black)
1. Dual HDMI and SDI output via expansion module, DC-IN input support and connection to master wheel/sensory controller2. Mounted on the back of the monitor3. To be used with the DJI graphic highlighter controller cable (sold separately)4. Features: SDI and HDMI dual video outputs, DC-IN input5. Suitable for DJI graphic highlight monitorsPacking list.-1 x graphic monitor expansion board-1 x 2mm ball-head hexagonal spanner-4 x M2.5-9mm screws
€721,53
-
Original DJI Zenmuse X9 Follow Focus Motor
1. Mounted on the bottom of X9 head camera to realize manual focus and auto-focus function of manual lens2. Adjust the focus of manual lens through Ronin 4D and three-channel follow focuser, also can be paired with LiDAR rangefinder to help manual lens achieve auto-focus function3. Applicable products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K4. Features:- Help manual lens to achieve auto-focus function (with LiDAR laser rangefinder)- Autofocus- Manual focus- Manual focus5. Package list:- X9 follow focus motor x 1- X9 follow focus motor guide 18.5mm x 1- X9 follow focus motor guide 44.5mm x 1- X9 follow focus motor guide 88mm x 1- X9 follow focus motor fixing bracket x 1- Follow focuser follow focus rack x 2- X9 follow focus motor gear x 1- LiDAR rangefinder/following motor cable x 2- M3-6 cup head socket head cap screws x 2- 2.5mm ball-head hexagonal wrench x 1
€380,03
-
Original DJI Zenmuse X9 Gimbal Counterweight
1. Screw fixed, stable and not easy to fall2. With installation tools, easy to use, fast installation3. Use: To solve the problem of not being able to level the pitch axis when pairing the DJI Ronin 4D with a heavy lens4. Packing list: X9 head counterweight x 1, M3-6 countersunk head screws x 4, 2mm ball-head hexagonal wrench x 15. Applicable products: DJI Zenmuse X9-6K, DJI Zenmuse X9-8K6. Weight: about 294g
€579,52
-
Original DJI Mini 4 Pro / Mini 3 Pro / Mini 3 Long Life Smart Flight Battery 3850 mAh (White)
1. Flight time: 45 minutes (Mini 4 Pro) / 47 minutes (Mini 3 Pro) / 51 minutes (Mini 3). The flight time is measured in a controlled test environment. The results may vary in external environments, usage methods, and firmware versions. Please refer to your experience.2. When using the long-life Intelligent Flight Battery, the aircraft weight will exceed 249 grams. Please check, confirm and strictly abide by local laws and regulations before flying3. Model: BWX162-3850-7.384. Capacity: 3850 mAh5. Nominal voltage: 7.38 V6. Charging limit voltage: 8.5 V7. Battery type: Li-ion8. Energy: 28.4 W9. Charging power: 58 W10. Charging ambient temperature: 5 to 40 degrees Celsius11. Charging time: 101 minutes (using DJI 30W USB-C charger, charging through the aircraft body) 78 minutes (using DJI 30W USB-C charger, charging through the two-way charging hub)12. Compatible products: for DJI Mini 4 Pro / Mini 3 Pro / Mini 313. Weight: about 121 grams14. Note: The product only contains batteries, no other
€180,63
-
Original DJI RS 3 Mini / RS 3 Pro / RS 3 / RS 2 / RSC 2 Screw Set
1. Easy to install replacement parts2. Each item is inspected and in good condition before delivery3. Repairing the drone is complicated, please ensure you have professional repair skills or go to a professional repair department4. Compatible products: for DJI RS 3 Mini / RS 3 Pro / RS 3 / RS 2 / RSC 25. Note: The shaft arm knob is only available for the RSC 2Packing list-2 x half moon ring camera fixing screws-2 x axial arm knob for RSC 2-4 x M4 screws (10 mm)
€20,61
-
For DJI Mavic 2 Pro/Zoom Gimbal Motherboard Repair Parts , Spec: Only Motherboard
1. Compatible models: for DJI Mavic 2 Pro/Zoom 2. Replace damaged or unusable ones with new ones3. Easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€137,84
-
Power Supply ESC Board Flex Cable For DJI Mavic Mini
1. Power supply ESC board flex cable for DJI Mavic Mini. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.
€13,96
-
For DJI Mavic 2 Pro / Mavic 2 Front And Rear Machine Arm Shell Repair Accessories(Left Front)
1. Non-destructive installation is quick and easy2. One-piece injection molding, solid and durable structure3. For DJI Mavic 2 Pro / Mavic 24. The real machine opens the mold, the fitting is stable5. Easy to install and use6. Repair accessories for accidental damage replacement7. Long life and easy installation
€19,69
-
For DJI Mavic 2 Pro / Mavic 2 Front And Rear Machine Arm Shell Repair Accessories(Right Front)
1. Non-destructive installation is quick and easy2. One-piece injection molding, solid and durable structure3. For DJI Mavic 2 Pro / Mavic 24. The real machine opens the mold, the fitting is stable5. Easy to install and use6. Repair accessories for accidental damage replacement7. Long life and easy installation
€19,69
-
For DJI Phantom 4 Pro YR ESC Board Repair Parts
1. For DJI Phantom 4/Phantom 4 Pro2. Replace damaged or unusable ones with new ones3. easy to install replacement parts4. Each item is inspected and in good condition before shipment.5. Repairing the drone is complicated, please make sure you have professional repair skills or go to a professional repair department
€74,53
-
For DJI Mavic Air 2 GPS Module Repair Accessories
1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Mavic Air 25. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: metal8. Weight: 20g
€68,94
-
For DJI Phantom 4 / 4 Pro V2.0 Yundai General Y-axis Motor
1. The real machine opens the mold, the accurate match2. Easy to install and use3. Use environmentally friendly materials with confidence4. For DJI Phantom 4 / 4 Pro5. Repair accessories for replacement of accidental damage6. Long life and easy installation7. Material: metal8. Weight: 20g
€44,82
-
For DJI Mavic Air 2 Lower Cover Assembly Bottom Shell Decorative Cover
1. Compatible model: for DJI Mavic Air 22. Made of high quality materials, reliable and durable3. Maintenance accessories for accidental damage replacement, making maintenance more worry-free4. Long service life and easy to install.5. Repairing the drone is complicated, please make sure you have professional repair skills, or go to a professional repair department
€49,03
-
[US Warehouse] Original DJI 03 Air Unit Module Lens Mounting Kit Camera Module Housing Frame(Green)
1. Easy to install, easy to use2. Strong and durable material, not easy to damage3. Effective protection of the lens, does not affect the use4. Applicable models: for DJI O3 sky end5. Use: lens module housing frame
€19,47
-
Gimbal Camera Signal Cable For DJI Air 2S
1. Material: plastic2. Stable transmission signal3. Good compatibility4. Not easy to rust, durable5. Suitable for: DJI Air 2S6. Function: responsible for the transmission of image transmission signals7. Weight: 10g
€24,10
-
Gimbal Lower Bracket For DJI Mavic 2 Pro / Zoom, Style: Zoom Edition
1. Real machine mold opening, accurate matching2. Easy to install and easy to use3. Healthy and environmentally friendly materials, long service life4. Compatible with DJI Mavic 2 Pro/Zoom5. The bracket plays the role of protecting the gimbal and motor
€34,56
-
For DJI FPV Drone Gimbal Camera Signal Cable
1. Type: dismantling accessories2. Easy to install and disassemble.3. Made of PVC material, durable and reliable.4. PTZ camera signal line transmission cable for DJI FPV drones.5. With this cable, you can get the video signal directly from the gimbal camera when recording video.Packing list: 1pc PTZ signal cable
€29,01
-
Original DJI Storage Protective Cover For Mavic 3 / Mavic 3 Classic /Mavic 3 Cine
1. Clever design, in the protection of the head camera at the same time can also be stored paddle, storage and removal more convenient2. Support the use of Celluar module and installation kit.3. Compatible products: for DJI Mavic 3 Classic/DJI Mavic 3/DJI Mavic 3 Cine4. Material: silicone5. Packing list: storage cover × 1
€65,05
![[US Warehouse] Original DJI 03 Air Unit Module Lens Mounting Kit Camera Module Housing Frame-garmade.com](http://garmade.com/cdn/shop/products/TBD0602351601BUS.jpg?height=645&pad_color=fff&v=1688983620&width=645)
