Aquarium Supplies

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 5W2. Power interface: USB3. Light bead color: blue-white light4. Color temperature: 8000-10000K5. Suitable for fish tanks: 10-30 cm fish tanks6. Size: lamp disk diameter of about 5 cm, lamp length of about 12 cm, cable length of about 130 cmFeatures:1. The light is close to the natural color, 360 degrees free adjustment, rapid heat dissipation, energy saving, eye protection without flicker2. Rotating aquarium lamp, light color uniformity, 360-degree free rotation of the lamp without dead angle, adjust the irradiation angle at will3. Lightweight and compact design, simple and practical, independent power switch design, easy to use, safe and splash-proof4. Good light does not strobe, soft light more eye protection, stable light, eye and fish protection, to avoid causing discomfort to fish and viewers5. High brightness LED lamp beads, restore natural colors, simulate the natural daylight spectrum, high clarity and brightness, zero distance and fish interaction

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 3W2. Flow rate: 250L/h3. Voltage: 220-240V 50/60Hz4. Usage: first use and after power outage, must be filled with water first5. Size: without degreasing film about 20 x 8 x 8 cm, with degreasing film about 23 x 8 x 8 cm, line length: about 120 cmFeatures:1. Wall-mounted waterfall filter, adjustable water flow, simulating the natural waterfall water filtration, gentle water flow, wide water table, no impact on the aquarium2. Change the water quality and efficient biochemical filtration, more effective bacterial filtration, remove impurities in the water, and stabilize the water quality of the fish tank3. Free control of the flow size, according to the size of the actual needs of the fish tank to freely adjust the size of the water, good flexibility, wide range of applications4. High performance silent motor, more efficient and energy saving, fixed knob, adjust the distance between the fish tank and the filter to make it balanced and more stable5. Forced filtration, lasting clean, no water change in the fish tank, water inlet grille, small holes in the water inlet grille filter tube, effectively prevent the inhalation of debris and small fish to clog the fuselage6. With oil film processor, the suction nozzle can float up and down automatically with the water level, good oil absorption effect and cleaner water surface7. It does not take up much space and is designed for small tanks. The transparent and compact body makes it easy to observe the water clarity and adjust the filtration effect

Read more less

1. Power: 5W2. Power interface: USB3. Light bead color: blue-white light4. Color temperature: 8000-10000K5. Suitable for fish tanks: 10-30 cm fish tanks6. Size: lamp disk diameter of about 5 cm, lamp length of about 12 cm, cable length of about 130 cmFeatures:1. The light is close to the natural color, 360 degrees free adjustment, rapid heat dissipation, energy saving, eye protection without flicker2. Rotating aquarium lamp, light color uniformity, 360-degree free rotation of the lamp without dead angle, adjust the irradiation angle at will3. Lightweight and compact design, simple and practical, independent power switch design, easy to use, safe and splash-proof4. Good light does not strobe, soft light more eye protection, stable light, eye and fish protection, to avoid causing discomfort to fish and viewers5. High brightness LED lamp beads, restore natural colors, simulate the natural daylight spectrum, high clarity and brightness, zero distance and fish interaction

Read more less

1. Material: acrylic2. Fixed-point feeding, prevent fish food from spreading, fixed feeding location, reduce fish food waste, no pollution and no muddy water3. Strong knob type suction cup, adsorption stability, so that the main body is not easy to bounce and shake, durable, not easy to fall off4. Correct use, save time and effort, add a little water on the suction cup, suction is more conducive to smooth glass tanks5. Acrylic material, fine workmanship, beautiful shape, rounded edges, do not hurt the fish, fun to watch the feeding process6. Acrylic feeding box, firm suction cups, high-definition transparent, one-piece molding, rounded design, does not hurt the fish scales, without the need to install anti-collision strips7. Size: red bug cup diameter of about 3.6 cm, small cylinder about 6.5 x 6.8 cm, large cylinder about 6.8 x 8 cm, small square about 10 x 6.3 x 3.9 cm, large square about 16 x 10 x 4 cmInstallation steps:1. Unwrap the knob of the received product and divide it into four parts (A, B, C, D in the picture)2. First press the A accessories on the glass, exhaust the air inside3. Put the B fitting on the A fitting first, close to the glass tightly4. Put the C fitting on the top in turn5. Put the D fitting on and tighten it

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less

1. The composition of the craft resin is mostly polyolefin, which is insoluble in water and has no harmful components released, so it will not jeopardize the small fishes2. Fine workmanship, non-toxic and safe to use3. Suitable for juvenile lizards, corn snakes, centipedes, etc., with good aquascape effect4. Material: resin5. Note: because it is a resin product, so there will be a little resin flavor6. Weight: about 164g

Read more less