Consumer Electronics

1. Material: ABS, electronic components2. Applicable area: within 20 square meters3. Wind speed gear: 3 gears4. Operation mode: mechanical5. Rechargeable battery capacity: 1200mAh6. Use 180ml large-capacity water tank, turn the lid to add water7. Nano ultrasonic atomization technology, fine ice fog, rapid cooling8. Three gears of wind speed, you can adjust freely9. Colorful night light design, lighting at night, creating an atmosphere10. Spray/soft wind independent button11. Product size: 12.2 x 9.9 x 16.9 cm12. Weight: In-line model: 425 grams, rechargeable model: 475 grams

Read more less

1. Material: ABS, electronic components2. Applicable area: within 20 square meters3. Wind speed gear: 3 gears4. Operation mode: mechanical5. Rechargeable battery capacity: 1200mAh6. Use 180ml large-capacity water tank, turn the lid to add water7. Nano ultrasonic atomization technology, fine ice fog, rapid cooling8. Three gears of wind speed, you can adjust freely9. Colorful night light design, lighting at night, creating an atmosphere10. Spray/soft wind independent button11. Product size: 12.2 x 9.9 x 16.9 cm12. Weight: In-line model: 425 grams, rechargeable model: 475 grams

Read more less

1. Material: ABS, electronic components2. Applicable area: within 20 square meters3. Wind speed gear: 3 gears4. Operation mode: mechanical5. Rechargeable battery capacity: 1200mAh6. Use 180ml large-capacity water tank, turn the lid to add water7. Nano ultrasonic atomization technology, fine ice fog, rapid cooling8. Three gears of wind speed, you can adjust freely9. Colorful night light design, lighting at night, creating an atmosphere10. Spray/soft wind independent button11. Product size: 12.2 x 9.9 x 16.9 cm12. Weight: In-line model: 425 grams, rechargeable model: 475 grams

Read more less

1. Material: ABS, electronic components2. Applicable area: within 20 square meters3. Wind speed gear: 3 gears4. Input: 5V 1A5. Battery capacity: 1200mAh6. Side power switch and USB interface for charging7. Bottom anti-skid pad design, stable and not easy to fall8. Touch adjustment, more convenient to use9. Turbine blades, strong wind10. Free adjustment up and down11. Large-capacity water tank, easy to add water12. USB charging port, long battery life13. Three gears of wind speed, you can adjust freely14. Product size: 16.8 x 13.1 x 4.4 cm15. Net weight: 263 grams

Read more less

1. Material: ABS, electronic components2. Applicable area: within 20 square meters3. Wind speed gear: 3 gears4. Input: 5V 1A5. Battery capacity: 1200mAh6. Side power switch and USB interface for charging7. Bottom anti-skid pad design, stable and not easy to fall8. Touch adjustment, more convenient to use9. Turbine blades, strong wind10. Free adjustment up and down11. Large-capacity water tank, easy to add water12. USB charging port, long battery life13. Three gears of wind speed, you can adjust freely14. Product size: 16.8 x 13.1 x 4.4 cm15. Net weight: 263 grams

Read more less

1. Recyclable, easy to disassemble;2. To prolong the service life of the accessories, please clean them regularly.3. Easy to remove and replace as part of routine maintenance.4. The filter maintains cleaning performance while reducing the infiltration of dust, pollen and other allergens into the air you breathe.5. Anti-tangle structure, detachable design, easy to clean6. Applicable models: for Roborock S7 / S7+ / T7S / T7S Plus7. Set accessories: 1 rolling brush + 4 pentagonal side brushes + 4 filters + 4 rags + screwdriver + 1 cleaning brush

Read more less

1. Replacement front wheel is specially designed for Shark Navigator Rotator, suitable for models NV350, NV351, NV352, NV355, NV356e, NV360, NV370, NV500, NV501, NV5022. Made of high-quality plastic material, durable and soft, will not damage the floor.3. Easy to install: Use a flat head screwdriver to push off the old small wheel, then install the new wheel.4. It is recommended to check the wheels regularly and replace the worn ones to help maintain the vacuum cleaning performance and bring you a healthier life.5. Material: plasticPackage Contents:1 pair x replacement wheels

Read more less

1. Filter dust, filter exhaust gas, protect vacuum cleaner motor2. Filter smoke particles, pollen, dust and other particles3. The filter is crucial to the suction power of the vacuum cleaner.4. The filter must be cleaned every 2 weeks and replaced every 6 months5. Suitable for Tineco wet dry vacuum cleaner

Read more less

1. Suitable for Shark Navigator Lift-Away NV350 NV351 NV352 NV353 NV360 NV356E NV42 NV80 UV420 vacuum cleaner2. Made of high-quality bristles, durable and long-lasting.3. Very easy to install, just need simple tools and a few minutes to replace the old one.4. Make your vacuum go deeper into the lint to remove dirt and pet hair.5. It is recommended to check the main brush regularly and replace the worn one to help maintain the vacuum cleaning performance and bring you a healthier life.6. Material: plastic7. Weight: 188g8. Product size: 27.5 x 5.3 x 5.2cm

Read more less

1. Filter dust, filter exhaust gas, protect vacuum cleaner motor2. Filter smoke particles, pollen, dust and other particles3. The filter is crucial to the suction power of the vacuum cleaner.4. The filter must be cleaned every 2 weeks and replaced every 6 months5. Suitable for Tineco wet dry vacuum cleaner

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

1. Oscillation mode: PLL Synthesized 2. Frequency range: 572-603MHz 3. Preset channel: 40 channels separately set 4 groups 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB 7. Receiving range: More than 250FT 8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB 9. LCD Display shows clear working status 10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack 11. Power supply: 2 x AA batteries (not included) 12. Size: 8.0 x 6.5cm

Read more less

Features:1. Dual-core DC brushless motor, strong wind, quiet and stable2. Spiral fan blades with large inclination angle, the cutting wind is slow and powerful3. Unique air duct, high-frequency air supply4. Breathing light design, more convenient at night5. Four air supply modes, one key to switch gears6. High-density safety barrier to prevent hand cutting7. One-button operation, simple and convenient8. Type-C charging interface, more convenient to use9. Hidden handle design, easy to move10. 3D surrounding wide-angle air supply to accelerate air circulationProduct Specifications:1. Material: ABS, PP, electronic components2. Input: 5V/2A3. Rated power: 10W4. Fan gear: 4 gears5. Adjustable angle: 90 degrees up and down adjustment6. Charging interface: Type-C7. Rechargeable battery capacity: 2000mAh8. Product size: 26 x 31 x 16 cm9. Net weight: plug-in type: 660 grams, rechargeable type: 700 grams

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features:1. Dual-core DC brushless motor, strong wind, quiet and stable2. Spiral fan blades with large inclination angle, the cutting wind is slow and powerful3. Unique air duct, high-frequency air supply4. Breathing light design, more convenient at night5. Four air supply modes, one key to switch gears6. High-density safety barrier to prevent hand cutting7. One-button operation, simple and convenient8. Type-C charging interface, more convenient to use9. Hidden handle design, easy to move10. 3D surrounding wide-angle air supply to accelerate air circulationProduct Specifications:1. Material: ABS, PP, electronic components2. Input: 5V/2A3. Rated power: 10W4. Fan gear: 4 gears5. Adjustable angle: 90 degrees up and down adjustment6. Charging interface: Type-C7. Rechargeable battery capacity: 2000mAh8. Product size: 26 x 31 x 16 cm9. Net weight: plug-in type: 660 grams, rechargeable type: 700 grams

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features:1. Hidden moving head track, adjustable air outlet2. Three spray outlet design, humidification and cooling3. Top water tank design, easy to add water4. Button operation, simple and convenient5. USB charging, more convenient to use6. Widened handle design, easy to move7. Pure copper DC fan, strong wind8. Low-noise operation, cool and not disturbingProduct parameters:1. Material: PP, electronic components2. Water tank capacity: 250ml3. Rated power: 10W4. Rated voltage: 5V5. Wind speed gear: 3 gears6. Number of fan blades: 3 pieces7. Battery capacity: 2000mAh8. Product size: 14 x 10.5 x 20.5 cm9. Product net weight: 700 grams

Read more less

1. Projection technology: 2.69 inches LCD display technology2. Bulb type: LED light source3. Bulb life: 30000 hours4. Brightness: 150 lumens5. Resolution: 1280x7206. Contrast ratio: 1000:17. Throw ratio: 1.3:18. Input port: AV/USB/HDMI9. Keystone correction: electronic keystone correction10. Focusing method: Electric focus11. Menu language: German/English/French/Spanish/Polish/German12. Projection size: 30-150 inches13. Speaker: 4 Ohm 3W independent multimedia sound cavity14. Total power: 60W15. Power supply voltage: AC110-240 50-60HZ16. Same screen mode: wired and wireless same screen, support Android/IOS17. Same screen technology: Air Play/Mriacas/WIFI Display18. Wireless connection: WiFi/Bluetooth19. CPU: D310020. WiFi: 2.4G+5G supports WIFI621. Bluetooth version: Bluetooth 5.122. Operation control: infrared remote control23. Packing list:- Projector x 1- HDMI cable AV cable x 1- Oower cable x 1- Manual x 1- Remote control x 1

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Printing effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 25.4-118mm7. Connection: Micro USB/Bluetooth 4.28. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 or above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 10

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Print effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 25.4-118mm7. Connection: Micro USB (Bluetooth not supported)8. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 and above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 10

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Print effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 25.4-118mm7. Connection: Micro USB (Bluetooth not supported)8. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 and above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 10

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Print effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 25.4-118mm7. Connection: Micro USB (Bluetooth not supported)8. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 and above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 10

Read more less

1. Suitable for school or home office, fast heating and easy to use.2. Hot and Cold Mode: The cool mode is ideal for laminating hot inks and colors to keep colors from fading or melting. Hot mode is suitable for commonly used documents.3. With advanced heating system, the preheating time of A4/A5/A6 laminating machine is shortened from 4 minutes to 120 seconds. NOTE: A beep will sound when the machine is not ready to warm up.4. The upgraded lamination system and double roller design ensure smooth lamination, so there is no noise when laminating at 320mm/min, allowing you to focus on your work.5. If a paper jam occurs, simply move the ABS lever lightly to remove the firmly adhered film.6. Built-in trimmer: Unlike other laminators, our cutter and precise grid lines are fixed on the machine, just push down and slide to easily trim bags. This not only saves your time, but also increases your productivity. The stationary knife design is easy to store and keeps your desk organized.7. You can use the laminator to protect your documents, precious letters, certificates, postcards, photos, etc.Parameter:1. Product model: FN3382. Product size: 380 x 140 x 77mm3. Laminated width: 230mm (A4 picture)4. Plastic thickness: 60~150mic5. Plastic size: A4 (any size below)6. Laminating speed: 320mm/min7. Heating method: quartz heating wire8. Preheating time: 1~2min9. Constant temperature range: 110~160 degrees Celsius10. Film withdrawal method: ABS toggle one-key film withdrawal11. Power supply: about 300W12. Power supply voltage: AC220V-240V (US standard AC110V-120V)13. Net weight: about 950g (EU/US) 990g (UK)14. Noise: less than 55db

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Printing effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 20-115mm7. Connection: Micro USB/Bluetooth 4.28. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 or above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 30

Read more less

1. Projection technology: 2.69 inches LCD display technology2. Bulb type: LED light source3. Bulb life: 30000 hours4. Brightness: 150 lumens5. Resolution: 1280x7206. Contrast ratio: 1000:17. Throw ratio: 1.3:18. Input port: AV/USB/HDMI9. Keystone correction: electronic keystone correction10. Focusing method: Electric focus11. Menu language: German/English/French/Spanish/Polish/German12. Projection size: 30-150 inches13. Speaker: 4 Ohm 3W independent multimedia sound cavity14. Total power: 60W15. Power supply voltage: AC110-240 50-60HZ16. Same screen mode: wired and wireless same screen, support Android/IOS17. Same screen technology: Air Play/Mriacas/WIFI Display18. Wireless connection: WiFi/Bluetooth19. CPU: D310020. WiFi: 2.4G+5G supports WIFI621. Bluetooth version: Bluetooth 5.122. Operation control: infrared remote control23. Packing list:- Projector x 1- HDMI cable AV cable x 1- Oower cable x 1- Manual x 1- Remote control x 1

Read more less

1. Projection technology: 2.69 inches LCD display technology2. Bulb type: LED light source3. Bulb life: 30000 hours4. Brightness: 150 lumens5. Resolution: 1280x7206. Contrast ratio: 1000:17. Throw ratio: 1.3:18. Input port: AV/USB/HDMI9. Keystone correction: electronic keystone correction10. Focusing method: Electric focus11. Menu language: German/English/French/Spanish/Polish/German12. Projection size: 30-150 inches13. Speaker: 4 Ohm 3W independent multimedia sound cavity14. Total power: 60W15. Power supply voltage: AC110-240 50-60HZ16. Same screen mode: wired and wireless same screen, support Android/IOS17. Same screen technology: Air Play/Mriacas/WIFI Display18. Wireless connection: WiFi/Bluetooth19. CPU: D310020. WiFi: 2.4G+5G supports WIFI621. Bluetooth version: Bluetooth 5.122. Operation control: infrared remote control23. Packing list:- Projector x 1- HDMI cable AV cable x 1- Oower cable x 1- Manual x 1- Remote control x 1

Read more less

1. APP: LABELIFEAPP2. LANGUAGE: Chinese, English, German, French, Russian3. Print resolution: 203DPI4. Print effective width: 108mm5. Print speed: 150mm/s6. Consumable width: 25.4-118mm7. Connection: Micro USB (Bluetooth not supported)8. Print head life: 50KM9. Tearing method: hand tearing, metal tearing knife10. Power supply: power adapter11. Power input: 24V 2.5A12. Driver support system: WIN XP/7/8/10/11, MAC 10.6 and above, CHROME OS, LINUX (CENTOS 7.0UBUNTU 12.04 ABOVE SYSTEM)Packing List:- Printer x 1- USB cable (USB-B) x 1- Power cord x 1- Adapter x 1- Instruction manual x 1- Type-C adapter x 1- 4 x 6 inch white sheet x 10

Read more less