Consumer Electronics

1. Easy to use and carry 2. With indicator light 3. Memory: 32GB 4. Support recording function 5. Ultra-portable storage device 6. Size: 70mm x 21mm x 9.4mm * User Manual: 1. Turn on: Please push the button to the Right, Then begin to record 2. Turn off: Please push the button to the Left, Then stop to record 3. Play: After recording, connect it to computer to play (format: WAV) 4. Male Jack: USB 2.0 (USB 2.0 interface, support win98 or above, no need the driver, it can be used as a USB) 5. Note: If the voltage is too low, the pilot lamp will flash fast. When charge, the light flashes in normal. After charging, the pilot lamp flashes put out. It can be used about 8 hours after one charging. (4GB can storage more than 140 hours voice file) 6. When turn on after 5 second start record voice, after finish record need 5 second than turn off, because firm ware need some second working time.

Read more less

Features:1. Suitable for barcode scanning applications such as elevators.2. Use advanced image recognition algorithms to easily decode various one-dimensional or two-dimensional codes.3. Onboard UART interface, which can be easily integrated into various embedded devices.4. Compact size and high integrationProduct parameters:1. Resolution: 640 x 4802. Scanning angle: horizontal 70 degrees, vertical 55 degrees, rolling 360 degrees3. Scan mode: induction, continuous4. Accuracy: one-dimensional code is greater than or equal to 5mil, two-dimensional code is greater than or equal to 10mil5. Communication interface: UART port (default 9600 8N1)6. LED indicator:Blue: ScanGreen: decoding successful7. Power supply: 3.3V8. Current: 120mA9. Security protection:Electrostatic protection: contact discharge 6 kV, air discharge ±12KVIP protection: IP54 (front)10. Operating temperature: -30 to 70 degrees Celsius11. Storage temperature: -40 to 80 degrees Celsius12. Working humidity: 5%RH-95%RH (non-condensing)13. Product size: 21 x 21 x 8.9mmPacking list:-Barcode scanning module (D) x 1-6PIN cable without header x 1-6PIN cable x 1

Read more less

1. Low-power SoC equipped with RISC-V 32-bit single-core processor, clocked at up to 160MHz2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)3. 400KB SRAM and 384KB ROM, and 4MB onboard flash memory4. Castle-shaped module and on-board ceramic antenna, allowing direct soldering to the carrier board5. Support flexible clock and module power independent settings and other controls to achieve low power consumption in different scenarios6. Integrated USB serial port full-speed controller, 15×GPIO pins, pin functions can be flexibly configured7. 3×SPI, 1×I2C, 2×UART, 1×I2S, 2×ADC, etc.8. Product size: 23.5 x 18mm9. Weight: 2g, 3g

Read more less

1. HPD322 two-phase stepper motor driver is a cost-effective subdivision driver designed based on PI flow control algorithm. It has excellent performance, high speed and large torque output, low noise, low vibration and low heat.2. The operating current and subdivision can be selected through the dial switch. There are 16 subdivisions and 16 currents to choose from. It has overvoltage, undervoltage, phase current and total current overcurrent protection. Its input and output control signals are all photoelectric. isolation.3. Signal input: single-ended, pulse + direction and double pulse;4. Built-in micro-subdivision; the maximum power supply can reach DC36V; the current is easy to set, 16 levels are optional, the output current peak can reach 2.2A; the current is halved after 1S of inactivity5. Optically isolated differential signal input, the maximum input pulse frequency is 300KHz;6. The pulse, direction and enable terminals all have constant current input functions and can be directly connected to the input signal without adding an external series resistor for voltage reduction and current limiting protection.7. High reliability: using multi-layer boards and surface mount sealing, leaving sufficient margin for power devicesSuitable for 20, 28, 35, 39, 42 4, 6, 8-wire two-phase stepper motorsUsage environment1. Do not place it next to other heating equipment. Avoid places with dust, oil, corrosive gases, excessive humidity and strong vibration. Combustible gases and conductive dust are prohibited.2. Temperature: 0-50 degrees Celsius3. Humidity: 40-90%RH4. Vibration: 10-55 Hz/0.15mm5. Storage temperature: -20-65 degrees Celsius6. Weight: 180g?

Read more less

1. On-board antenna, open transmission distance of about 50 meters, without external antenna. If installed into the metal shell to avoid signal shielding, you can buy your own external antenna installation, reserved IPEX antenna seat2. 12S output interface, can be connected with 12S input function of the amplifier, leave the key expansion interface, to realize the up/down song switch, pause/play, volume adjustment, scalability is strong3. There is a TYPE-C USB interface, which can realize PC sound card connection or USB power supply; for QCC5125 models, through the USB can be connected to the official software on the internal DSP in the EQ operation, only for users who have a software foundation4. With acrylic shell and fixed magnetic column, magnetic adsorption fixed installation, convenient and fast5. QCC5125/QCC3034+PCM5102A, lossless transmission, lossless decoding, no loss, to show the sound of each dynamic and details, high-frequency burr, rounded midrange, low-frequency power, good elasticity6. Extremely high parameter performance: dynamic 112dB, signal-to-noise ratio 112dB, distortion -93dB7. Key parts of the use of fever capacitors, in the fugitive factor, leakage current, ripple current, ESR and other parameters of excellent performance, improve the speed of sound, dynamics, texture, density parameters, the overall quality of the high school and low three-frequency upgrade8. Different temperatures, voltages and frequencies will affect the sound quality, and a good fugitive factor can reduce the impact9. Capacitor small leakage current to reduce the degree of aging to extend the life, reduce noise, low ESR to reduce high-frequency reactance, increase the dynamic response speed10. Size: 74 x 40 x 25mm11. Weight: 63gNotes:- Does not support AC power supply, be sure to use DC voltage, power supply range DC8-32V- Shell need to assemble their own, shipping does not include USB cable and audio cable- Equipped with XH2.54-2P power cord, XH2.54-3P shielded cable two- AUX and bluetooth switch through the signal relay, bluetooth priority, bluetooth is not connected to automatically transfer to AUX, bluetooth name: WUZHI AUDIO

Read more less

Features:1. WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.2. Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.3. Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.4. Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.5. Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.6. WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.7. Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.Product parameters:1. Tire material: nylon wheels, rubber tires2. Body material: 5052 aluminum alloy (2mm thick)3. OLED screen: 0.91 inches4. Chassis height: 33.70mm5. Tire diameter: 80mm6. Tire width: 42.50mm7. Motor: N20 12V 200RPM x 48. Number of driving wheels: 49. Running speed: 1.25m/s10. Vertical obstacle surmounting ability: 40mm11. Drive payload: 0.8kg12. Climbing ability: 22 degrees13. Minimum turning radius: 0m (rotating in place)14. Motor power: 1.5W x 415. Remote control function: WIFI AP/STA16. Upper surface area: 17551 square millimeters17. Communication interface: UART/serial bus servo interface/I2C18. Battery support: 18650 lithium battery × 3 (delivered without battery)19. Overall dimensions: 194×168×100mm20. Weight: 860g

Read more less

1. Features: Three-proof design (waterproof, insect-proof, oily smoke-proof), easy tearing of paper, supports secondary development, compatible with multiple languages, power supply overcurrent and overvoltage protection, wide voltage design2. Purpose: receipt printing3. Supported systems: Bluetooth: Android, IOS, USB: Android, window4. Network printing: not supported5. Automatic double-sided printing: not supported6. Interface: USB-B/Bluetooth7. Printing media: plain paper8. Paper capacity: 57x50/roll9. Printing method: line thermal10. Paper width: 58mm11. Paper diameter: less than or equal to 52mm12. Paper thickness: 0.048mm-0.08mm13. Print command: ESC/POS command14. Number of printing points: 384 points/line15. Point density: 8 points/mm16. Printing speed: maximum printing speed 90mm/s17. Printing width: 48mm18. Paper output direction: Top paper output19. Font: Font A: 12 X 24, Font B: 9 X 17, Chinese characters: 24×2420. Character size: Font A: 1.25×3.00mm, Font B: 0.88X2.13mm, Chinese characters: 3.00×3.00mm21. Characters per line: Font A: 35/Font B: 46/Chinese characters: 1722. Character types: Chinese Simplified/Chinese Traditional/English/Japanese/Korean23. 1D barcode: UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN8), CODE39, ITF, CODABAR, CODE93, CODE12824. 2D barcode: QR25. Power supply voltage: 110130VAC/220230VAC, 50HZ /60HZ26. Printer mechanical life: 13 million lines27. Print head life: 50km or 10 8 pulses28. Mean time between failures: 3000 hours29. Average number of lines printed without failure: 12 million lines30. Cash drawer driver function: supported31. Product size: 175 x 115 x 86mm32. Product net weight: 380 gramsPacking list:-Printer x 1-Power adapter x 1-Thermal printing paper x 1

Read more less

1. Adopting high sensitivity condenser silicon microphone, 360-degree stereo omni-directional surround sound pickup, clearer sound2. Simple operation, no need to turn on the state, you can also start recording with one key3. Acoustic DSP dynamic noise reduction processing module, effectively reduce environmental noise4. PCM recording is an uncompressed original coding format, bit rate up to lossless 1536kbps, PCM signal has not undergone any coding and compression (lossless compression)5. Segmentation function, you can record the file according to the set recording time for automatic segmentation, such as: 30, 60 minutes incremental way to store as a file6. Timing automatic recording function, just set the recording start time and end time, then you can realize automatic recording, you can also set the periodic recording (such as: single, daily, weekday)7. Password setting, after setting the password, you need to enter the password to access the computer, which can protect your privacy and recording files8. Comes with HIFI sound quality speakers, smooth and clear / lossless acoustic / rich in detail, equalizer a variety of playback modes (funk / Hip Hop / rock / jazz / classical / electronic music)9. Through the OTG can be directly connected to the Android phone, easy to manage files and download music, you can also transfer files to the phone/computer for storage10. Suitable for a variety of scenarios, such as: business meetings, classroom learning, training and learning, interviewsParameters:1. Material: ABS + zinc alloy2. Screen: 0.96 inch color screen3. Transmission: USB2.04. Recording format: WAV5. Battery capacity: 230mAh6. Memory: expandable to 256G7. Speaker: yes8. Recording time: about 16 hours; playback time: about 3.5 hours; charging time: about 2 hours9. Size: 11 x 26 x 98mm10. Weight: 56.2gPacking list:- Host x 1- Data cable x 1- Instruction manual x 1

Read more less

1. Built-in time chip, with automatic time synchronization function, can be used as the basis for time, easy to browse to find documents2. Built-in high-energy lithium polymer batteries to meet your recording needs3. Power failure auto-save, when the system detects insufficient power, the recorder will automatically save the file in advance and then automatically shut down to ensure that the recording data is not lost4. Mini and compact, easy to carry around5. OTG connection to the phone, convenient transmission6. Strong magnetic adsorption, not easy to loseParameters:1. Shell material: CNC aluminum alloy2. Battery capacity: 120mAh3. Recording mode: boot recording, shutdown save4. Recording format: WAV5. Playback format: MP3/WMA/WAV6. Sampling rate: 48kHz7. Recording bit rate: 192kbps8. Charging time: about 1 hour; recording time: about 18 hours; playback time: about 12 hours9. Memory time:- 4GB: up to 48 hours- 8GB: up to 96 hours- 16GB: up to 192 hours- 32GB: up to 384 hours10. Size: 29 x 29 x 7.6mm11. Weight: about 9.7g

Read more less

1. Material: ABS, electronic components2. Usage: Photo, label printing3. Supported languages: English, French, Italian, Spanish, German, Greek, Russian, Polish, Japanese, Korean, Thai, Traditional Chinese, Portuguese, Czech4. Connection method: Bluetooth connection5. Bluetooth version: 5.06. Power: 5W7. Thermal paper size: 57 x 25mm8. Printing accuracy: 200dpi9. Printing speed: 60m/s10. Charging interface: Type-C11. Battery capacity: 1200 mAh12. Product size: 83 x 83 x 40mm13. Weight: 196 gramsPacking list:-Printer x 1-Printing paper x 1-Charging cable x 1

Read more less

1. Adopting high sensitivity condenser silicon microphone, 360-degree stereo omni-directional surround sound pickup, clearer sound2. Simple operation, no need to turn on the state, you can also start recording with one key3. Acoustic DSP dynamic noise reduction processing module, effectively reduce environmental noise4. PCM recording is an uncompressed original coding format, bit rate up to lossless 1536kbps, PCM signal has not undergone any coding and compression (lossless compression)5. Segmentation function, you can record the file according to the set recording time for automatic segmentation, such as: 30, 60 minutes incremental way to store as a file6. Timing automatic recording function, just set the recording start time and end time, then you can realize automatic recording, you can also set the periodic recording (such as: single, daily, weekday)7. Password setting, after setting the password, you need to enter the password to access the computer, which can protect your privacy and recording files8. Comes with HIFI sound quality speakers, smooth and clear / lossless acoustic / rich in detail, equalizer a variety of playback modes (funk / Hip Hop / rock / jazz / classical / electronic music)9. Through the OTG can be directly connected to the Android phone, easy to manage files and download music, you can also transfer files to the phone/computer for storage10. Suitable for a variety of scenarios, such as: business meetings, classroom learning, training and learning, interviewsParameters:1. Material: ABS + zinc alloy2. Screen: 0.96 inch color screen3. Transmission: USB2.04. Recording format: WAV5. Battery capacity: 230mAh6. Memory: expandable to 256G7. Speaker: yes8. Recording time: about 16 hours; playback time: about 3.5 hours; charging time: about 2 hours9. Size: 11 x 26 x 98mm10. Weight: 56.2gPacking list:- Host x 1- Data cable x 1- Instruction manual x 1

Read more less

Features:1. 360-degree surround shooting, easy to shoot blockbusters with one click2. Comes with a beauty fill light, 3 color modes and 9 levels of brightness adjustment to meet the needs of multiple scenes.3. Folding length 155mm, weight 260g, lightweight and easy to carry4. Using stable aluminum alloy pole, anti-slip mobile phone clip, stable tripod, it is both a stabilizer and a selfie stick tripod.5. Detachable multi-function remote control, adding new functions of desktop PTZ mode to meet your daily live broadcast needsParameters:1. Bluetooth version: V4.22. Transmission distance: 10m3. Battery: CR16324. Compatible systems: Android 4.4 / iOS 5.15. PTZ battery life: 2H6. Fill light battery: 400mAh7. Gimbal battery: 500mAh8. Charging port: Type-C9. Support mobile phones:43-84mm (head)6.7-16.6mm (desktop gimbal)10. Fill light usage time: 1.5H11. Fill light power: 1.2W12. Fill light color temperature: 3000k-6500k13. Product material: ABS+aluminum alloy14. Product size: 155x75x66 mm15. Product weight: 250g

Read more less

Features:1. Convert your precious cassette tape collection to standalone MP3s, no driver installation required.2. Convert complete tape music to MP3 files by automatically partitioning each song.3. Plug and play, easy to use.4. Playback allows you to check recorded music directly on your device.5. Operates on battery or USB power.6. Compact and portable design, can be taken anywhere.7. Can be used as a personal cassette player, easy to use.8. With automatic reversal function.Parameters:1. Interface: USB2.0 standard2. Recording format: MP33. Power supply: 2 AA batteries, or USB interface power supply option4. Working time: about 1 hour5. Audio channel: Stereo L/R6. Bit rate: 128Kbps

Read more less

Features:1. Convert your precious tape collection to MP32. Plug and play, easy to operate, no driver required3. Comes with tape converter software to guide you through the transfer4. Operates on battery or USB power5. Compact and portable design, can be taken anywhere6. Can be used as a personal cassette player, easy to useSpecifications:1. Interface: USB2.0 standard2. Recording format: Wave, MP33. Power supply: 2 AA batteries, or USB port power option4. Power: greater than or equal to 400mW5. System requirements:- P4 1.7GHz CPU or above- 256MB RAM- 1 available USB 2.0 port- Microsoft Windows XP/Vista/7/8- Support Mac OS X

Read more less

Features: 1. Using Music Digital Converter, you can easily convert old analog music to MP3 and save to USB drive or SD card, with each song automatically partitioned and played. 2. Comes with mini USB power supply, easy to use. 3. With 3.5mm and 2 RCA audio input options. 4. With playback and remote control functions, easy to use. 5. The remote control contains button batteries Specifications: 1. Storage media: USB drive, SD card 2. Audio input: 3.5mm audio, 2 RCA L/R audio 3. Audio output: 3.5mm audio 4. Converter format: MP3 5. Bit rate: 128Kbps 6. User interface: recording button, infrared remote control, LED working status indicator 7. Power supply: Mini USB port power supply (5V DC adapter, PC USB)

Read more less

1. Interface: USB2.02. Video input: RCA composite yellow port3. Audio input: RCA L/R audio white/red port4. Video output: 3.5mm AV cable, HDMI5. Audio output: 3.5mm AV cable, HDMI6. Storage: micro SD card (maximum 16GB, does not support NTSF format)7. Video recording format: .avi8. Recording file video: about 9.3MB/minute, 0.56GB/hour9. Power supply: 5V/1A10. Record analog video to digital format to TF card with one click, no PC required11. Convert old video or camcorder tapes to digital format, no computer required12. One-click recording button to record video directly to Micro SD cardNote: Please do not insert the USB drive and Micro SD card at the same time. FAT and NTFS formats are supported, exFAT is not supported.

Read more less

1. Interface: USB3.02. Video input: HDMIx43. Audio input: HDMIx44. Video output: HDMI5. Audio output: HDMI6. System requirements: W input 7,8,10, OS X 10.9 or higher, Linux. PC: Intel Core i5-3400 + NVIDIA GT630, VGA card with DirectX 10 support, sound card, 4GB RAM, powered USB 3.0 port7. Resolution: 1080P/60fps8. Power supply: 5V/2A9. Capture format: .MP410. Capture/live broadcast full HD 3.0 video via USB1080.60 port, users can capture 1 or 2 or 4 channels simultaneously, depending on your needs

Read more less

1. Charging method: 5V/1A mobile phone power adapter2. Charging time: about 1.5h3. Working time: about 13 hours4. Standby time: about 8 months, automatic shutdown when voltage is lower than 2.9V5. Working current: 90mA6. Power: 400mW7. Working temperature: -10 degrees to 60 degrees8. LCD interface display, data recording, battery power display9. Maximum output deviation from the best straight line applicable to the measured output within the pressure range at 25 degrees10. Suitable for testing fan and blower pressure, filter resistance, wind speed, furnace pressure, orifice pressure difference, bubble water level, hydraulic system pressure, etc. Also suitable for controlling gas proportions and automatic valves during combustion, monitoring blood pressure and respiratory pressure.

Read more less

1. This movie screen adopts the principle of old-fashioned movie screens, which can be folded for easy carrying and can also be washed. It is suitable for use in fluid places or open spaces.2. Polyester cloth is not afraid of mold and insects, and has elasticity and recovery ability. Strong and durable, anti-wrinkle.3. Main uses: home, outdoor mobile screening of outdoor movies, bars, restaurants, food stalls, squares, courtyards, churches, outdoor camping, tourism, etc.4. Black edges are used to reinforce the surrounding, and the wiring is dense and even, strong and practical. With metal buckle for easy hanging.5. Material: polyester

Read more less

1. Resolution: 1920x1440, 3 million pixels2. Sensor size: 1/93. Frame rate: 30fps4. Perspective: 60 degrees5. Focal length: 2cm6. Exposure light: automatic7. Working temperature: 0 to 50 degrees Celsius8. Light source: 8pcs LED lights9. Cable length: 1.5m10. Power supply: Type-C/8 Pin11. Photo format: PNG12. Video format: MP4

Read more less

1. Back clip-on scanner, can replace PDA, code scanning gun, mobile phone scanning2. Compatible with mainstream mobile phones and various APPs3. You can scan in information wherever you can input text. Click on the input box to see the cursor and you can easily scan in information. It replaces manual input of barcodes and QR codes, and replaces scanning with mobile phone cameras. It is fast and saves power.4. Can be connected to computer office software documents (.docx / .xlsx /.txt) and can be connected to mobile WPS App and Notepad App5. Ergonomic design, comfortable grip, no fatigue when working for a long time6. Equipped with large-capacity lithium battery to provide long and reliable battery lifeParameter:1. Material: ABS plastic2. Dimensions: length 147 x width 68 x thickness 32.25mm3. Interface: USB+Bluetooth+2.4G4. Prompt mode: indicator light, buzzer5. Weight: 106g6. Power supply voltage: 5V/1A7. Battery capacity: 2500mAh8. Light source: LED indicator light9. Image sensor: 1024X600 pixels10. Support barcode:-1D: Codabar, Code 11, Code93, MSI, Code 128, UCC/EAN-128, Code 39, EAN-8, EAN-13, UPC-A, SBN, Industrial 25, Interleaved 25, Standard 25, 2/5 Matrix-2D: QR, DataMatrix, PDF417, Aztec, Hanxin, Micro PDF41711. Resolution: greater than or equal to 4mil12. Decoding speed: 100/second13. Scanning mode: manual, induction, continuous14. Bluetooth protocol: HID, SPP, BLE15. Scanning depth of field: 40mm~300mm16. Contrast: greater than or equal to 10%17. Reading angle: rotation 360 degrees, tilt +/-65 degrees, deflection +/-60 degrees18. Working temperature: -20-50 degrees Celsius19. Relative humidity: 5% to 95% (non-condensing)20. Drop: can withstand a 1.2-meter drop to the concrete floorAccessories: Type-c data cable, USB charging cable, wireless receiver, manual

Read more less

1. Quick heating in 2 seconds, no need to wait for warmth2. Adjustable angle, manually shake the head up and down 30 degrees3. Intelligent constant temperature corrugated wire heating element, even heating, fast heating, high thermal efficiency, no light and no glare4. One-button convenient operation, even the elderly and children can operate it easily5. The warm range is farther and wider, and the cross-flow wind wheel accelerates the wind duct to make the wind more concentrated and farther away.6. Silent air duct, the sound is as low as 34db, naturally low noise, you can sleep peacefully all night7. Automatic power-off design when tilted to avoid the risk of collision and leakage, dual protection by intelligent temperature control and fuse8. 380W power, low power heating device, energy saving9. Material: PP10. Power cord length: 90cm11. Net weight: 0.53kg12. Dimensions: 17 x 14 x 20.5cm

Read more less

1. This electricity saving box helps you save money! 2. Easily insert into a wall socket and it will save electricity once current flows 3. Effectively saves 30% electricity for your washing machine, fan, TV, speaker and much more household appliances 4. Reduces electrical power loss and prolongs the life of electric equipment 5. Plug and play

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. CPU: H618 Quadcore cortex-A53 frequency: 1.5G2. GPU: Mali-G31 MP2 3. Flash: 16/32/64 GB4. SDRAM: 2/4GB5. Power supply: DC 5V/2A6. OS: Android 12.07. KODI: 18.18. WiFi: 2.4G +5G+BT5.0 WiFi69. 3D: Hardware 3D graphics acceleration 10. Support decoder format: - VP9-10 Profile-2 up to 8K- H.265 HEVC MP-10 L5.1 up to 8K- AVS2 JiZhun 10-bit decoder up to 4K 60fps- H.264 AVC HP L5.1 up to 4Kx2K 30fps- H.264 MVC up to 1080P 60fps- MPEG-4 ASP L5 up to 1080P 60fps (ISO-14496)- WMV/VC-1 SP/MP/AP up to 1080P 60fps- AVS-P16(AVS+) /AVS-P2 JiZhun Profile up to 1080P 60fps- MPEG-2 MP/HL up to 1080P 60fps (ISO-13818)- MPEG-1 MP/HL up to 1080P 60fps (ISO-11172)- RealVideo 8/9/10 up to 1080P 60fps- WebM up to VGA- MJPEG and JPEG unlimited pixel resolution decoding (ISO/IEC-10918)- Supports JPEG thumbnail, scaling, rotation and transition effects- Supports mkv, wmv, mpg, mpeg, dat, avi, mov, iso, mp4, rm andjpg file- HD MPEG1/2/4, H.264, HD AVC/VC-1, RM/RMVB, Xvid/DivX3/4/5/6 , RealVideo8/9/1011. Support media format: Avi / Rm / Rmvb / Ts / Vob / Mkv / Mov / ISO / wmv / asf / flv/dat / mpg / mpeg12. Support music format: MP3 / WMA / AAC / WAV / OGG / AC3 / DDP / TrueHD / DTS / HD / FLAC / APE13. Support photo format: HD JPEG / BMP / GIF / PNG / TIFF 14. USB host:2 USB 2.015. Card reader: SD/SDHC/MMC cards16. HDD file system: FAT16/FAT32/NTFS17. Support subtitle: SRT / SMI / SUB / SSA / IDX+USB18. High difinition video output: SD / HD max. 8K pixel 19. OSD type of languages: English / French / German / Spanish / Italian / etc multilateral languages20. LAN: ethernet standard 10/100M RJ-4521. Mouse / Keyboard: support mouse and keyboard via USB, support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle22. HDMI: CEC and HDCP 2,2,4K 60fps max resolution output23. HD decoding: 8K 6K 4K 2K H.265 hardware video decode24. 1080P/AV/3G: support25. Network function: Skype chatting, Picasa, Youtube, Flicker, Facebook, Online movies, etc26. Other feature: free internet searching, thousands of android applications, many kinds of games, etc.

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. Widely Compatibility: The XLR cable is perfectly compatible with equipment with 3-pin connectors such as microphones,stage lighting, mixing boards, power amplifiers, studio harmonizers, speakers, patch bays and so on. In addition, these XLR cables are widely used at stage speakers, club stages, KTV, and home theater.2. HI-FI Sound: No noise. The core of JUNSUNMAY microphone cable is 24AWG oxygen-free all copper conductors, it provides lossless signal transmission, anti-oxidation and anti-corrosion. The wire shielding layer adopts a double shielding design (foil shielding and inner copper spiral shielding)to keep our wires away from noise and interference. 3. Stable Connection: Our balanced Mic cable uses heavy-duty zinc alloy housing, pure copper silver-plated XLR pins, self-locking male to female connector design, this XLR speaker cable can provide a stable connection between devices with an XLR interface, easy to plug & unplug.4. Durable & Flexible PVC Jacket: Our XLR to XLR cable uses imported high-elastic pvc, compared with ordinary pvc , this cable is more durable, not easy to crack, no knots, abrasion resistance, oil resistance, and dirt resistance.This can extend the liftime of the XLR male to female cables.5. Multiple specifications: Multiple length specifications for you to choose from.

Read more less

1. Can be used for all kinds of wood cardboard and dry goods testing2. Large liquid crystal display wood moisture value3. Built-in four modes for accurate testing4. Ergonomic design, adapt to a variety of special occasions5. Built-in low battery detection and automatic power off functionParameters:1. Material: ABS2. Measuring method: resistance value3. Measuring range: 0-99.9 percent4. Resolution: 0.1 percent5. Accuracy: 0.5 percent6. Pin length: 10mm7. Automatic shutdown: 10 minutes8. Power supply: 1 x 9V battery (not included in the shipment)9. Operating temperature: 0-40 degrees celsius10. Size: 145 x 67 x 32mm11. Weight: 200g

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Multi-purpose heat: gift tags, memo labels, logo labels, handbook decoration, etc.4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. For 50x50mm image, can print 60 images8. Note: only black color can be printed9. Applicable models: for Phomemo M02 / M02S / M02Pro10. Width: about 50mm11. Length: about 3.5m/roll

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Multi-purpose heat: gift tags, memo labels, logo labels, handbook decoration, photo printing, etc.4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal self-adhesive8. Note: only black color can be printed9. Applicable models: for Phomemo M02 / M02S / M02Pro / M0310. Width: about 50mm11. Length: about 2.5m/roll

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Used for cable, necklace, bracelet and other marking4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal self-adhesive8. Note: only black color can be printed9. Applicable models: for Phomemo M110 / M20010. Quantity: 100pcs/roll11. Size: about 25 x 38mm+40mm

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Multi-purpose heat: gift tags, memo labels, logo labels, handbook decoration, etc.4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal self-adhesive8. Note: only black color can be printed9. Applicable models: for Phomemo M110 / M20010. Quantity: 140pcs/roll11. Size: about 50mm

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Used for cable, necklace, bracelet and other marking4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal self-adhesive8. Note: only black color can be printed9. Applicable models: for Phomemo M110 / M20010. Quantity: 100pcs/roll11. Size: about 25 x 38mm+40mm

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Used for cable, necklace, bracelet and other marking4. BPA free self-adhesive labels, please feel free to use them5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal self-adhesive8. Note: only black color can be printed9. Applicable models: for Phomemo M110 / M20010. Quantity: 100pcs/roll11. Size: about 25 x 38mm+40mm

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Multi-purpose heat: gift tags, memo labels, logo labels, handbook decoration, photo printing, etc.4. Clear font, not easy to lose color5. Picture retention time: about 10 years (room temperature, avoid light)6. Note: only black color can be printed7. Applicable models: for Phomemo M02 / M02S / M02Pro8. Width: about 53mm9. Length: about 2.5m/roll

Read more less

1. Colorless thermal coating, scratch-resistant, water and oil resistant2. Good ductility, not easy to break3. Multi-purpose heat: gift tags, memo labels, logo labels, picture printing, etc.4. BPA-free self-adhesive labels, please rest assured that use5. Clear font, not easy to lose color6. Strong adhesion, not easy to fall off7. Material: thermal paper8. Note: only black color can be printed9. Applicable models: for Phomemo M110 / M20010. Quantity: about 130pcs/roll11. Size: about 40 x 60mm

Read more less

1. This VR mask is specially designed for Meta Quest 3 VR smart glasses to ensure precise compatibility.2. Made of durable and soft silicone material, forming a protective barrier between your face and the device. It effectively prevents sweat from soaking the original facial interface, keeping your device sweat-free and hygienic.3. The VR facial interface has an extended nose pad design to minimize light leakage around the nose and prevent exhaled air from entering the VR lens. It also helps prevent fogging, ensuring an uninterrupted immersive VR experience.4. With the option to easily replace the mask pad, you can enjoy clear, unobstructed vision. It protects your VR device lenses from dust, scratches, smudges and aging5. This mask is lightweight and designed to prevent signal interference and will not interfere with any functions. It is easy to install and disassemble.7. Material: SiliconeNote: Only the mask and shading pad are included, and other accessories such as VR glasses are not included

Read more less

1. Bluetooth version: 5.0 (unobstructed, 15 meters)2. Input sensitivity: 500mV3. Input mode: AUX+Bluetooth4. Number of power channels: 2.1 channels5. Adaptable speaker: 20-100W, 4-8 ohms6. Protection mechanism: anti-reverse connection, overheating and overcurrent, short circuit protection.7. Adaptable power supply: DC 12-24V/5A or above (cannot be connected to 24V battery pack).8. Output power: less than 50W for left and right channel, less than 100W for subwoofer.9. Size: about 9.3 x 9 x 2.2cm10. Weight: about 185g (including packaging)Tip: In the case of enough audio input, enough power supply voltage/current, there will be enough output power, the higher the power supply voltage the higher the output power, the lower the impedance of the speaker the higher the output power, please make sure that the adapted power supply power is greater than the actual working power of the amplifier

Read more less

1. This VR goggles is for Mate Quest Pro VR glasses2. The eye mask is made of high-quality soft silicone, which is soft to wear and will not hurt your skin.3. Fully blackout goggles can block fiber optic intrusion and glare, allowing you to immerse yourself more deeply in the immersive VR experience.4. Magnetic snap-in type makes it quick to install and disassemble.5. The eye mask is reasonably sized and easy to store and carry without taking up too much space.6. Does not include Meta Quest Pro VR headset and other accessoriesSpecification:1. Material: silicone + plastic2. Size: approx. 17.9 x 8.4 x 9.6cm3. Weight: 42g

Read more less

1. Built-in AirTag holder, insert AirTag into the small hole, you can easily find the remote control2. Anti-slip design on the back for a comfortable grip3. Hand strap prevents the remote control from slipping, and it can be attached anywhere conveniently4. Precise cutouts allow easy access to all ports and buttons without interfering with use5. All-inclusive design, anti-drop and wear-resistant, durable6. Material: silicone7. Note: only luminous green models with luminous; shipped only silicone sleeve, no other

Read more less

1. Built-in AirTag holder, insert AirTag into the small hole, you can easily find the remote control2. Anti-slip design on the back for a comfortable grip3. Hand strap prevents the remote control from slipping, and it can be attached anywhere conveniently4. Precise cutouts allow easy access to all ports and buttons without interfering with use5. All-inclusive design, anti-drop and wear-resistant, durable6. Material: silicone7. Note: only luminous green models with luminous; shipped only silicone sleeve, no other

Read more less

1. Built-in AirTag holder, insert the AirTag into the small hole, you can easily find the Siri remote control2. Anti-slip design on the back for a comfortable grip3. Hand strap prevents the remote control from slipping, and it can be attached anywhere conveniently4. Precise cutouts allow easy access to all ports and buttons without interfering with use5. All-inclusive design, anti-drop and wear-resistant, durable6. Material: silicone7. Note: shipping only silicone cover, no other

Read more less

Features：1.Cut Deeper Faster : Equipped with an air assist set on the laser engraver for wood and metal, large and stable air blows away smoke and debris generated during laser engraving machine working, helping engraver to cut faster and deeper, increasing laser efficiency, thus saving your time.2.Clean Surfce and Smooth edge : Air Assist Set uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces.3.Keep Low Noise Vibration : Air Assist Set has the advantages of low noise and vibration. The vibration generated by the air-assisted device, during the laser cutter working process will not affect the positioning of the laser head, ensuring continuous cutting of lines and complete patterns4.Protecte Laser Head : Air assist set has a stable air output system that blows away the acceptable debris and smoke generated during the laser heads work, protecting the laser heads lens from contamination and extending the laser heads service life.Compatible With NEJE Machine: Air Assist compatible with NEJE Laser Engraver and is easy to install.

Read more less

Features：1.Cut Deeper Faster : Equipped with an air assist set on the laser engraver for wood and metal, large and stable air blows away smoke and debris generated during laser engraving machine working, helping engraver to cut faster and deeper, increasing laser efficiency, thus saving your time.2.Clean Surfce and Smooth edge : Air Assist Set uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines,complete patterns, and clean material surfaces.3.Keep Low Noise Vibration : Air Assist Set has the advantages of low noise and vibration. The vibration generated by the air-assisted device, during the laser cutter working process will not affect the positioning of the laser head, ensuring continuous cutting of lines and complete patterns4.Protecte Laser Head : Air assist set has a stable air output system that blows away the acceptable debris and smoke generated during the laser heads work, protecting the laser heads lens from contamination and extending the laser heads service life.Compatible With NEJE Machine: Air Assist compatible with NEJE Laser Engraver and is easy to install.

Read more less

1. Scope of application: suitable for Oculus Quest 2, Meta Oculus 3, Pico 4, Pico 3, PS5 VR glasses and handle storage, etc.2. Anti-slip hooks and semi-circular structure are designed to be stable and durable, stably fixing VR equipment3. Wall-mounted storage, space-saving, easy and quick to take.4. Material: ABS5. Net weight: 129g

Read more less