Consumer Electronics

1. 10 specifications, 20 for each, a total of 200. 2. Specifications: 3*4*2.5 / 3*4*2.5 / 3*6*4.3 /3*6*5 / 3*4*2 / 3*4*2 / 4*4*1.5 / 4*4* 0.8 / 3*6*2.5 / 6*6*3.1. 3. The products are widely used in the mainstream model remote control, LCD panel button switch.

Read more less

1. Material Iron + stainless steel 2. Features U:6-36VDC I:300mA Sn:8mm 3. Application Metal proximity sensor 4. Packing List 1 x Metal proximity sensor 5. Dimensions: 6.5 x 3.0 x 3.0cm 6. Weight: 95g

Read more less

1. Material: PA66 2. Rated voltage: 250V 3. Rated current: 20A 4. Stripping length: 12-13 mm 5. Stripping length range: 0.47 in 6. No danger of wire loosening and tape embrittlement, transparent and safe 7. With test holes, no need to remove the tape to measure the voltage 8. Direct insertion, wrong connection can be pulled out, repeated connection 9. Each contact shrapnel is independent, different wire diameter conductors are also available, safe short connection. 10. Permanent temperature resistance 105 Celsius degree, non-brittle 11. Maximum connectable 4mm/32A/400V Connection method: 1. Stripping insulating skin of single core and strand 9-11 mm 2. Move the orange pressure bar up with your thumb and open the spring box. 3. Insert the wire through the spring box opening. 4. Press down the orange pressure bar and the wire will be clamped automatically. Wire removal method: 1. The wire can be removed by moving the orange pressure bar upward with the thumb.

Read more less

1. Material: PA66 2. Rated voltage: 250V 3. Rated current: 20A 4. Stripping length: 12-13 mm 5. Stripping length range: 0.47 in 6. No danger of wire loosening and tape embrittlement, transparent and safe 7. With test holes, no need to remove the tape to measure the voltage 8. Direct insertion, wrong connection can be pulled out, repeated connection 9. Each contact shrapnel is independent, different wire diameter conductors are also available, safe short connection. 10. Permanent temperature resistance 105 Celsius degree, non-brittle 11. Maximum connectable 4mm/32A/400V Connection method: 1. Stripping insulating skin of single core and strand 9-11 mm 2. Move the orange pressure bar up with your thumb and open the spring box. 3. Insert the wire through the spring box opening. 4. Press down the orange pressure bar and the wire will be clamped automatically. Wire removal method: 1. The wire can be removed by moving the orange pressure bar upward with the thumb.

Read more less

1. Number of cores: 22. Size: 20.5x12.4x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Insulator material: PC9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 32. Size: 20.5x12.4x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 52. Size: 20.5x26.6x14.5mm3. Rated voltage: 250V4. Rated current: 32A5. Rated power: 4KW6. Working frequency: Low frequency7. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Applicable wire: 0.08-2.5 square millimeter single-stranded hard wire/0.08-4 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 42. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in 773-1047. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-strand hard wire

Read more less

1. Interface type: push type2. Material: PC+Nylon3. Frequency: 50/60hz4. Rated current: 32A5. Rated voltage: 450V6. Number of holes: 37. Size: 39.8x26.2x14.5mm8. Rated power: 7000W9. Features: flame-retardant shell, copper conductive, easy installation, firm wiring10. Applicable wire: both soft and hard wire11. Wiring range; 0.08-4.0 square mm12. Application scope: lighting electronics, electrical appliances, power sockets

Read more less

1. Number of cores: 22. Size: 19.5x9.2x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in7. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-strand hard wire

Read more less

1. Number of cores: 42. Size: 19.5x13.0x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: plug-in 773-1047. Production process: Injection molding8. Application range: Wire9. Contact material: Copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire

Read more less

1. Number of cores: 22. Size: 19.5x9.2x13.1mm3. Rated voltage: 400V4. Rated current: 32A5. Rated power: 4KW6. Interface type: Cage wiring7. Production process: Injection molding8. Application range: cable9. Contact material: tinned copper10. Insulator material: PC11. Applicable wire: 0.75-4 square millimeter single-strand hard wire12. Working frequency: low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Cage wiring7. Production process: Injection molding8. Application range: Cable9. Contact material: Tinned copper10. Insulator material: PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire12. Working frequency: Low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 24A5. Rated power: 4KW6. Interface type: Plug-in 773-1067. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 0.75-2.5 square millimeter single-stranded hard wire, 1.5-2.5 square millimeter multi-strand flexible wire12. Working frequency: low frequency

Read more less

1. Number of cores: 62. Size: 19.5x18.8x13.1mm3. Rated voltage: 400V4. Rated current: 32A5. Rated power: 4KW6. Interface type: plug-in 773-1067. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PA6611. Applicable wire: 0.75-4 square millimeter single-strand hard wire12. Working frequency: Low frequency

Read more less

1. Number of cores: 32. Size: 25.6x20.1x11.2mm3. Rated voltage: 400V4. Rated current: 41A5. Rated power: 4KW6. Interface type: Plug-in7. Production process: Injection molding8. Application range: Wire9. Contact material: Tinned copper10. Insulator material: PC, PA6611. Applicable wire: 2.5-6 square millimeter single-strand hard wire12. Working frequency: Low frequency

Read more less

1. Frequency: 50/60Hz2. Material: PC3. Number of holes: 2/3/4/54. Interface type: Push type5. Rated current: 32A6. Rated voltage: 220V7. Rated power: 8000w8. Scope of application: Distribution line9. Ambient temperature: Below 125 degrees Celsius10. Scope of application: 0.08-4 square millimeters11. Features: Safe, fast, convenient and simple12. Stripping length: About 10mm13. Applicable wires: Both flexible and hard wires14. The materials used are safe and environmentally friendly, to ensure the effective use of terminals, to solve wiring troubles, and to last15. Open, connect and close, wiring in three steps, open the booster and insert the wire, put down the booster to complete the wiring16. Safety test hole, you can directly use the electric pen to check whether the electric pen is charged, reduce the hidden danger of electricity, and use electricity safely

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts2. Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out3. Stripping length: About 11-12mm4. Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire5. Rated voltage: 250V (LT-2/LT-3 is 250/600V)6. Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)7. Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off

Read more less

1. Material: Metal 2. Installation diameter: 16mm 3. 7-Pin 4. Contact resistance: <= 0.005ohm 5. Contains 5 plugs per pack 6. Dimensions: 4.6 x 2.0 x 2.0cm 7. Weight: 101g

Read more less

1. Color Black + silver 2. Material Plastic + metal 3. Interface Type 3.5mm male to 6.35 female 4. Application Fits all audio device with 3.5mm jack 5. Packing List 100 x Converters 6. Dimensions: 5.2 x 1.3 x 1.3cm 7. Weight: 49g

Read more less

1. Box size: 111x203x30mm 2. Quantity: 120 3. Style: 6 kinds 4. Material: all copper tin plated 5. Weight: 0.2kg 6. Applicable wire diameter: 0.5-6 square 7. Product use: electrician, household, equipment switch 8. Features: flame retardant casing, thick copper core, complete models

Read more less

1. Material: PVC + copper 2. Alligator clips are fully insulated and easily put in probe tips

Read more less

1. Material: Metal 2. Installation diameter: 16mm 3. 6-Pin 4. Contact resistance: <= 0.005ohm 5. Contains 5 plugs per pack 6. Dimensions: 4.5 x 2.5 x 2.0cm 7. Weight: 99g

Read more less

1. Color: Silver 2. Material: Iron 3. Withstand voltage: AC 500V (50Hz)/min 4. Rated load: DC 50V 0.2A 5. Dimensions: 4.7 cm x 0.8 cm x 0.8 cm

Read more less

1. Material: Iron 2. Withstand voltage: AC 500V (50Hz)/min 3. Rated load: DC 50V 0.2A 4. 10 pieces will be shipped 5. Dimensions: 8.0 cm x 1.2 cm x 1.2 cm

Read more less

1. Color: Yellow 2. Great for DIY project 3. Applications: test instruments / educational instrument / car testing / toy model / audio speaker etc. 4. Contains 20pcs binding posts per pack 5. Dimensions: 4.5 x 1.0 x 1.0cm 6. Weight: 139g

Read more less

1. Color: Golden 2. Material: Iron 3. Interface Type 6.35mm male to 3.5mm female jack 4. Application Audio jack connector / DIY 5. Dimensions: 4.5 x 1.0 x 1.0cm 6. Weight: 58g

Read more less

1. Color: Yellow 2. Great for DIY project 3. Applications: test instruments / educational instrument / car testing / toy model / audio speaker etc. 4. Contains 20pcs binding posts per pack 5. Dimensions: 4.5 x 1.0 x 1.0cm 6. Weight: 139g

Read more less

1. Color: Yellow 2. Great for DIY project 3. Applications: test instruments / educational instrument / car testing / toy model / audio speaker etc. 4. Contains 20pcs binding posts per pack 5. Dimensions: 4.5 x 1.0 x 1.0cm 6. Weight: 139g

Read more less

1. Material: Plastic + Copper 2. 6.5mm audio adapter 3. Great for DIY project 4. Dimensions: 1.1 x 1.1 x 8.2cm 5. Weight: 112g

Read more less

1. Terminals spade width: 6.3mm 2. Quantity: 480 3. Widely use for electric power, electrical appliance to connect to power source 4. Package included: -480 x Female terminal connectors -480 x Case

Read more less

1. Material: Metal 2. Installation diameter: 16mm 3. 8-Pin 4. Voltage: 250V 5. Rated current: 5A 6. Contact resistance: - Contains 5 plugs per pack 7. Dimensions: 4.5 x 2.5 x 2.5cm 8. Weight: 103g

Read more less

1. Made of high quality material, durable to use 2. Small size, lightweight and durable 3. Material of Insulation: Modified nylon 4. Contact material: Phosphor copper 5. Wire Cross section: 0.08~2.5mm2(single hard wire), 0.08~4mm2(multi soft wire)

Read more less

1. Made of high quality material, durable to use 2. Small size, lightweight and durable 3. Material of Insulation: Modified nylon 4. Contact material: Phosphor copper 5. Wire Cross section: 0.75~2.5mm2

Read more less

1. Made of high quality material, durable to use 2. Small size, lightweight and durable 3. Material of Insulation: Modified nylon 4. Contact material: Phosphor copper 5. Wire Cross section: 0.08~2.5mm2(single hard wire), 0.08~4mm2(multi soft wire)

Read more less

Features1. Its work is characterized by side refrigeration and side fever2. Hot and cold on both sides of the temperature difference of 68 degrees3. Connected to the 12-volt power supply cooling piece on both sides there will be difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise it will cause cooler internal overheating and burning4. These devices must be used in conjunction with a heat sink to avoid burned5. Each device is full inspected and tested6. Fitted with 6-inch insulated leadsSpecification1. Size: 40mm x 40mm2. Operates from 0~15.2V and 0~6A3. Operates Temperature: -30C to 70C4. Max power consumption: 60W5. Material：Semiconductor/ceramic plates4. Package included: 1 x cooler plate moduleInstallationCooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.

Read more less