Consumer Electronics

1. Input voltage: 8-60V2. Input current: 0-15A3. Output voltage: 10-120V4. Output current: 0-15A5. Power: 900W6. Working frequency: 150KHz7. Short circuit protection: 20A fuse8. Control mode: digital control + digital tube display9. Voltage regulation/display resolution: less than 100V/0.01V, greater than 100V/0.1V10. Current adjustment/display resolution: less than 10A/0.01A, greater than 10A/0.1A11. Output ripple: within 50mV12. Weight: about 243g13. Size: about 11x9.6x4.6cmFeatures:1. Using a microprocessor, the output voltage and current can be adjusted2. With memory saving function, 10 groups of parameters can be stored, and can be stored and recalled freely3. The use of power devices, combined with the CV and CC loops formed by peripheral precision op amps, improves the overall performance of the module4. With input voltage regulation protection function5. With constant voltage, constant current function6. Using 4-bit high-brightness digital tube, it can display parameters such as output voltage, current, power and capacity in real time7. Automatic/manual switch to display parameters such as voltage, current, power, capacity, etc.8. With output OUT, constant voltage CV, constant current CC indicator, you can check the working status in real time9. It can be set whether to output automatically after power-on10. The current set voltage and current value can be saved with one key

Read more less

1. Voltage: DC12-24V2. Frequency: 50/60HZ3. Installation method: indoor, ceiling installation4. HF system: 5.8GHz CW radio wave, ISM band5. Transmitting power: less than 10mW6. Power: 70W (DC 12V)7. Detection angle: 360 degrees8. Distance: about 1-10m (radius) adjustable9. Working delay: 10 seconds to 3 minutes10. Light control illumination: about 2-2000 LUX11. Power consumption: about 0.5W12. Description: 807 with power output, 807K without power output13. Applicable environment: corridors, toilets, living rooms, corridors, warehouses, garages, etc.14. Installation reminder: the induction switch has a transmission blind spot in the central area. If it is installed in a small indoor environment (such as bathroom, kitchen), try to install it on the side or in the corner, so that the induction area will be more effective on the side. otherwise, the vertical center activity may not be sensed15. Size: about 7.6x4.1x3.9cm

Read more less

1. Note: The FM high-fidelity wireless microphone needs to be used with the FM radio function audio or power amplifier, amplifier, etc., and cannot be independently amplified.2. As long as there is FM FM radio function, switch to FM radio function after power on, and the same frequency points are consistent, you can wirelessly amplify3. 225 wireless transmission channels, covering the 87-108MHZ frequency band4. Microphone loudspeaker, no whistling5. Battery capacity: 250mAH6. Use time: 6-12 hours7. Sound pressure level: greater than or equal to 130 decibels8. Frequency response: 30Hz-20KHz9. Output power: 16mW10. Weight: 30 grams

Read more less

1. Made of quality plastic material, durable to use. 2. Well built and durable AC adapter. 3. Providing best quality products of newly-fashionable and superior with professional customer service for end-users. 4. Small lightweight and easy to carry when travelling. 5. This product is very suitable for overseas business office and travel to carry the use, while supporting the export of electrical products for use.

Read more less

1. Memory capacity (MAX): 128G, more than 10,000 photos taken, more than 3 days of video shooting (not included) 2. Battery life: measured continuous use for about 6 hours 3. File format: photo JPG, video MP4 4. Shooting distance: 2.95mm-infinity and more than 1 km 5. Charging port: Type-c 6. Headphone jack: 3.5mm 7. Shutter speed: 1/10 second-1/2650 second 8. Image resolution: 64MP; 56MP; 48M (8000 x 6000); 36M (6880 x 5160); 24M (5600 x 4200); 20M (5120 x 3840); 16M (4640 x 3480); 12M (4032 x 3024 ); 8M (3264 x 2448); 5M (2592 x 1944) 9. Video resolution: 4K 30FPS; 2.7K/1080P 60FPS; 1080P 30FPS; 720P 60FPS; 720P 30FPS 10. Language: English, Simplified Chinese, Traditional Chinese, Japanese, Korean, French, German, Italian, Spanish, Portuguese, Russian, Polish, Vietnamese 11. Wi-Fi control (remotely view/save videos and photos via mobile phone) 12. 4K video recording resolution MAX, 64 million pixels MAX 13. 4800 mAh real capacity large battery (built-in lithium battery) 14. F=2.7 2.95mm super large lens aperture, large light intake, high brightness, true color 3-inch IPS display 16:9 (480x854 resolution) 15. Metallic texture, stable hand feel, exquisite skin texture 16. Interchangeable lens, external microphone, fill light, stand (optional) 17. Wi-Fi connects to the mobile phone, the product is interconnected to transmit photos, remote controls video and photos, downloads the APP and connects with the product to transfer photos to the mobile phone 18. IR night vision, when the lens senses changes in light intensity, it switches to IR-CUT, allowing you to take pictures in dim environments. 19. Front and rear dual true high-definition lenses with 120 degree wide angle record every wonderful moment. Press and hold the camera button on any interface to record, release to end and save the video. 20. 16X anti-shake zoom, distant scenery is within reach, anti-shake optimization function while zooming 21. Supports a variety of filter functions to make photos more colorful 22. Can be used as an external computer camera to give the camera more possibilities 23. Camera size: 13x12.5x9.5 cm 24. Weight: about 360 grams for a single camera, 45 grams for macro, 61 grams for microphone, 60 grams for fill light, and 200 grams for handheld stand Packing list: - Camera - Shoulder straps - Built-in battery - Lens cap - Charging Cable - User Guide - Certificate of conformity - Warranty Card - Does not include memory card

Read more less

1. Start up and play video and music pictures automatically2. Built-in 4G storage space3. Play PPT and PDF files4. Landscape and portrait display5. 3.5 External Audio6. The machine supports external USB mouse operation7. Support 2K, 4K video playback8. Can be used as background music player9. Device interface HDMI/AV/USB2.0/TF card slot10. Packing list: Host + power + remote control +AV cable + instruction + 1 HDMI cable

Read more less

1. Channel selection: manual2. Speaker: built-in3. FM: 88-1084. AM: 53-1605. Power supply: AA battery x2 (not included)6. Rated voltage: 3V7. Rated power: 0.5W8. Material: ABS9. Applicable people: the elderly10. Radio tuning mode: pointer11. Channel: mono12. Band type: two bands13. Size: about 9.5x5.8x2.2cm14. Weight: about 63 grams

Read more less

Features: 1. Detachable large screen frame, large screen mobile phone or small screen mobile phone can be switched at any time, suitable for 5-7 inch smartphones 2. 120 degree viewing angle 3. Blue light eye protection 4. Within 800 degrees of myopia, both eyes can be adjusted independently for naked eye use 5. Install the APP on the manual on the mobile phone, and watch and use a large number of 3D movies and games for free on the APP, giving you an immersive experience Product Specifications: 1. Lenses: high-definition blue-ray coated lenses \ uncoated lenses 2. Pupil distance: 58-75mm; focal length: 53.3mm 3. Product size: 18x13.5x10cm 4. Weight: 260g Notice: 1. The product does not come with a battery 2. The size is measured by hand, please forgive me if there is any error packing list: Host x 1 Mirror cloth x 1 manual x 1

Read more less

1. Strong and durable 2. Stable, tough 3. Professional recording studio, live shock mount 4. Material: 50mm metal 5. Simple operation, convenient and practical

Read more less

1. Made of high quality ABS material, stable and firm, suitable for our using. 2. The adjustable clamp will fit most standard-sized music sheet stands and microphone stands. 3. Simple to install and convenient to disassemble, easy to carry and store. 4. Adjust the clamp-on tray to a comfortable height, lock the mount in place and you are ready to start the show 5. The plate board used to fix sound card, suitable for stage, chat room, internet bar, control room and so on. 6. Tray size: 16.5 x 22cm 7. Diameter range of clamp: 2.1cm to 3cm

Read more less

Memory Card Type:SD CardScreen Type:LCD ScreenImage Stabilization:Electronic Image StabilizationSet Type:Zoom SetsModel Number:Digital CameraImage Resolution (Video):Full HD (1920x1080)Recording Format:Picture: JPEG Video: AVI1. CMOS sensor, up to 16 million pixels2. Storage media: expandable SD card / HCSD card to 32GB3. Sensitivity: automatic, ISO100, ISO200, ISO4004. Lens: fixed lens F/3.2, f=7.6mm5. Focus range: 1.2m - infinity6. Still image: JEPG/VGA, 1M, 3M, 5M, 12M, 16M (interpolation), movie clip AVI 1080P 720P VGA7.LED fill light: <1.0m range Open/close8. white balance: automatic / sunlight / cloudy / bulb / fluorescent9. Exposure compensation: -2.0/+2.010. Self-timer: Off / 2 seconds / 5 seconds / 10 seconds, automatic shutdown: off / 1/3 / 5 / 10 minutes11. Computer interface: USB2.0 (high speed)12. Microphone: Built-in, speaker: built-in13. LCD screen: 2.7-inch TFT-LCD (230,000 pixels, 4:3)14. Video output: NTSC/PAL15. Power supply: lithium ion battery BL-5C

Read more less

Memory Card Type:SD CardScreen Type:LCD ScreenImage Stabilization:Electronic Image StabilizationSet Type:Zoom SetsModel Number:Digital CameraImage Resolution (Video):Full HD (1920x1080)Recording Format:Picture: JPEG Video: AVI1. CMOS sensor, up to 16 million pixels2. Storage media: expandable SD card / HCSD card to 32GB3. Sensitivity: automatic, ISO100, ISO200, ISO4004. Lens: fixed lens F/3.2, f=7.6mm5. Focus range: 1.2m - infinity6. Still image: JEPG/VGA, 1M, 3M, 5M, 12M, 16M (interpolation), movie clip AVI 1080P 720P VGA7.LED fill light: <1.0m range Open/close8. white balance: automatic / sunlight / cloudy / bulb / fluorescent9. Exposure compensation: -2.0/+2.010. Self-timer: Off / 2 seconds / 5 seconds / 10 seconds, automatic shutdown: off / 1/3 / 5 / 10 minutes11. Computer interface: USB2.0 (high speed)12. Microphone: Built-in, speaker: built-in13. LCD screen: 2.7-inch TFT-LCD (230,000 pixels, 4:3)14. Video output: NTSC/PAL15. Power supply: lithium ion battery BL-5C

Read more less

1. Video resolution: 1280x720HD, 640x480 VGA, 320x240 QVGA2. Digital zoom: 8 x digital zoom3. Exposure: EV-3 EV+34. White balance: auto/day/cloudy/tungsten/fluorescent5. Scene: Auto/Night Portrait/Night Scene/Portrait/Landscape/Sports/Party/Beach/High Sensitivity6. ISO: Auto/100/200/4007. Selfie: 2/5/10 seconds delay8. File format: JPEG format (still image)/AVI format9. Anti-shake: support10. Flash: Auto/Forced flash/Flash off/Red-eye reduction11. Direct printing: support12. Face first: support13. Smile shot: support14. Continuous shooting: support (VGA 6PCS)15. Microphone: support16. Optical Viewfinder: N/A17. TV output: N/A18. Port: USB 2.019. System requirements: Windows XP/Vista/7, MAC20. Battery capacity: 550mAh Li-ion battery21. Image sensor: CMOS sensor22. It can be matched with Class 10 SD memory card (not included) to enhance the reading speedFeatures:1. 48 million photosensitive elements take images, effectively use colorful frame rates, and white can also capture emotional levels2. Greatly improve the color illuminance (FSI) technology, increase the amount of light, full HD shooting3. 8x digital zoom, take beautiful photos instantly4. 2.7-inch TFT LCD screen, high-definition screen, watch while shooting5. A variety of scene modes to add creativity to photography6. Support Selfie, with flash function7. When the subject is very close to the camera lens, no manual adjustment is required to focus correctly8. Anti-shake function to avoid blurred photos due to shaking when shooting9. Facial recognition function, can take higher quality portrait pictures10. Support connecting to a computer for printing, and can also be cropped or rotated in the camera before printing as neededPacking list:1. Host x12. USB data cable x13. Hand rope x14. Manual x15. Cloth bag x1

Read more less

Do you have trouble at that how to connect 6 sets power amplifier and 2 sets loudspeakers?Do you have trouble at that shift select 6 sets power amplifier to make 2 sets loudspeaker sounding at the same time?One strong power amplifier and loudspeaker distribute device able to solve the above problems,1. 6 sets power amplifier key type switch select output, 2 sets stereophonic loudspeaker key type switch select output (2 sets loudspeakers able to be independently start or close)2. 6 sets input adopt 6 gears mechanical switch manually shift, gears switch will not generate burst sound when shifting3. 2 sets stereophonic loudspeaker able to send sound at the same time, also able to close one set loudspeaker or multiply sets loudspeaker independently, manually select the key type switch.4. Input passageway support up to 300W power amplifier and all types loudspeakers from 4 ohm to 16 ohm.5. Signal input provide electric tube power amplifier signal idle protect function.6. Input and output manually select switch, able to be used once inserted, stably shift signal, not generate any disturb or noise among the passageways.7. Compact design and solid metal shell, simple installation, the product neednot additionally connect power supply.8. Simple installation: Input and output, able to be used once inserted, convenient to install, then can enjoy different hearing experienceProduct Parameter1. Interface: Banana type plug2. Power supply: No need additionally connect power supply, able to be used once inserted3. Compatible all types power amplifiers and loudspeakers4. Input\output accept the heavy type loudspeaker wire or loudspeaker pin wire through terminal.5. Connect the power amplifier to AMP - 1-2-3-4-5-6 position.6. Connect the loudspeaker to SPKR - A and B position respectively.7. Input passageway: 6 sets power amplifier input (banana type plug)8. Output passageway: 2 sets loudspeaker output (banana type plug)9. Power: input passageway support 300W10. Metal materials, fine steel shell, compact size suitable to any system.11. Passageway power: Input passageway support up to 300W.12. Frequency responding: 10Hz - 50KHz.13. Single product net weight: 1.21 kg14. Product size: 320mm x 110mm x 62mm

Read more less

Do you have trouble at that how to connect 2 sets stereophonic signal source and 8 sets output equipment?Do you have trouble at that how to make 8 sets equipment output send sound at the same time after 2 sets equipment select shift output?One strong stereophonic shift distribute device able to solve the problems that multiply equipment plug in and out,1. 8 sets stereophonic output has independent switch, able to start at the same time, also able to be closed independently, start at the same time no consumption at the signal source tone quality and volume.2. 2 sets input able to start at the same time and mix together to input, also able to close one set independently,3. Able to solve the problem that able to distribute output 8 sets stereophonic after 1 set or 2 sets stereophonic mix input, output independent switch control,4. Simple installation: input and output, able to be used once inserted, convenient to install, input and output signal no consumption, then can enjoy different hearing experienceProduct Parameter1. Material: Metal2. Interface: RCA interface3. Power supply: USB 5V supply power4. Input and output impedance: 10K ohms - 50K ohms5. Frequency responding: 20 - 20kHz.6. Distortion: Less than 0.002%7. Output consumption: Less than 0.01dB8. Signal gain: 15dB9. Signal-noise ratio S/N: Greater than 98dB10. Input and output interface: Standard RCA interface11. Input passageway quantity: 2 sets stereophonic shift input (2 sets input able to start at the same time and mix together to input, also able to close one set independently)12. Output passageway quantity: 8 sets stereophonic shift input (able to start at the same time and close independently)13. Control switch: Input and output adopt self lock switch, accurately select manually shift14. Input shift passageway: 2 passageways15. Output shift passageway: 8 passageways16. Single product net weight: 0.45 kg17. Product size: 167mm x 81mm x 38mmKit list1. B062 2 in 8 out audio frequency signal select shift device x 12. USB power supply wire (wire length 100cm) x 1

Read more less

1. Made of high quality ABS material, stable and firm, suitable for our using. 2. The adjustable clamp will fit most standard-sized music sheet stands and microphone stands. 3. Simple to install and convenient to disassemble, easy to carry and store. 4. Adjust the clamp-on tray to a comfortable height, lock the mount in place and you are ready to start the show 5. The plate board used to fix sound card, suitable for stage, chat room, internet bar, control room and so on. 6. Tray size: 27 x 20.6cm 7. Diameter range of clamp: 1.32cm to 3cm

Read more less

1. PMMA lens, increase light transmittance and light input2. 2.4-inch high-definition color screen, collimating focusing lens, dual photosensitive holes3. Electronic universal horizontal bubble, 360-degree accurate positioning4. Photography + dual power supply: small optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, live voice broadcast5. Photography + dual power supply + Bluetooth: large optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, real voice broadcast, Bluetooth mobile APP6. Camera + video + bluetooth + drawing: large optical system, electronic angle sensor, electronic universal horizontal bubble, camera assisted aiming, Bluetooth mobile APP, dual processor, 4x digital zoom, photo/audio/video, music video playback , 16G storage space, trapezoidal measurement7. Scope of application: distance measurement / area volume measurement / Pythagorean measurement / Bluetooth drawing8. Battery capacity: photography + dual power supply / photography + dual power supply + Bluetooth: 2400mah; camera + video + Bluetooth + drawing: 4800mah9. Power mode: USB charging / built-in lithium battery10. Measurement mode: Length/Area/Volume/Pythagorean/Angle Height/Wall Speed ​​Measurement11. Measuring range: 80 meters, 120 meters, 200 meters12. Charging voltage: DC 5v13. Charging current: 1A14. Charging power: 5w15. Dimensions: photography + dual power supply / photography + dual power supply + Bluetooth: 12.5 x 5.4 x 2.7cm, camera + video + Bluetooth + drawing: 14 x 5.8 x 2.8mm16. Weight: about 160g

Read more less

Product Parameters1. Voltage range: AC 95-240V, 50-60Hz 2. Current: 5A 3. Sensor: NCT, 10K 4. Temperature error: +-1 degrees Celsius 5. Time error: less than 1% 6. Temperature control range: 5-35 degrees Celsius 7. Normal working environment temperature/humidity: -10~45 degrees Celsius, 5~95%RH (no water vapor condensation) 8. Power: less than 1.5W 9. Panel material: PC+ABS 10. Install the embedded box: 86mmx86mm/conventional European box 11. Protection class: IP20 12. Button type: capacitive touch button 13. Screen: LCDProduct Features1. LCD display, more friendly interface 2. Touch operation buttons, smoother interaction 3. Ultra-thin embedded panel, fit all kinds of walls 4. Borderless small rounded corner design 5. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environmentsFunction Features1. Rich function options, Modbus, WiFi, room card, etc., to meet all your needs 2. Strict temperature control accuracy to provide the temperature you want 3. Power off protection, save all your settings safely 4. Provide weather information and humidity display 5. 5+1+1 mode preset adjustment for a week, programmable setting for 6 periods a day, green energy saving, less expenses, more intelligent environmental protection 6. Support the creation of product local groups/shares to achieve unlimited centralized control/multi-terminal control of the number of products 7. Suitable for Tmall Genie, Amazon Echo, Google Home voice control

Read more less

1. The D52-2058 rail-type digital display multi-function meter simultaneously displays the measured AC voltage, AC current, power factor, active power, frequency, and electrical energy (electricity) on the meter.2. Please check AC80-300V for measuring 110V 220V voltage, and 200-450V for measuring 380V voltage3. Measurement accuracy: 1% +/- 2 words4. Display: 4-digit red 0.31-inch LED digital tube for voltage display, 5-digit red 0.31-inch LED digital tube for current and frequency display, 5-digit green 0.31-inch LED display for active power and electrical energy (electricity) Digital Tube5. Measurement range: AC voltage: AC80. 0-300. 0V, AC200. 0-450. 0V, AC current: AC0-100. 0A, the current display resolution is 0. 01A when the measurement current is less than 100A, and the measurement current is greater than 0.01A At 100A, the current display resolution is 0.1A, and the range is automatically converted.6. Active power: (measurement voltage AC80. 0-300. 0V) 0.0-30000W (AC200. 0-450. 0V: 45000W)7. Electric energy: 0. 000-99999kwh, decimal point automatic conversion8. Power frequency: 45. 00-65. 00HZ9. Power factor: 1.000-0. 00010. Measurement speed: about 2 times per second11. Weight: 145g12. Installation width: the instrument occupies the 3P air switch position (DZ47/C45)14. Installation method: track type

Read more less

1. It is both a pendant and a voice recorder2. One-key recording, easy to operate3. Professional audio noise reduction chip low-power amplifier, restore real and clear sound4. Intelligent voice-activated recording, effectively saving memory space and battery capacity5. Connect the computer to synchronize Beijing time, which is convenient to record the file generation time and end time6. After the recording file is encrypted, it can effectively prevent data leakage and use it more safely7. Automatically save when power off to ensure that the recorded data is not lost8. Large-capacity U disk storage function, which can store files and connect to a computer for viewing9. Connect the OTG adapter to play and manage the recording files on the phone (only supports Android phones)10. Material: Zinc Alloy11. Recording time: 35 hours12. Playing time: 14 hours13. Charging time: 1.5 hours14. Standby time: 30 days15. Battery capacity: 120mah16. Recording format: WAV/MP317. Playback format: MP3/WMA/WAV18. Dimensions: 42x37x9.6mm

Read more less

1. Mainly used to test various battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, discharge energy, power consumption and running time, and display the measurement data through the LCD screen.2. Voltage:- Measuring range: 0-200V. (When the test voltage is less than 8V, please use the independent power supply method)- Display format: less than 10V display such as: 9.99VBelow 100V such as: 99.9VMore than 100V display such as: 199V- Minimum resolution: 0.01V-Start test voltage: 0.05V- Measurement accuracy: 1%3. Current:- Measuring range: 0-10A (Model: PZEM-013)0-300A (Model: PZEM-015)- Display format: less than 1A display as: 999mALess than 10A is displayed as: 9.99aLess than 100A is displayed as: 99.9AGreater than or equal to 100A is displayed as: 199A- Minimum resolution: 1mA-Initial test current: 10mA (Model: PZEM-013)20mA (Model: PZEM-015)- Measurement accuracy: 1%4. Power:- Measuring range: 0-2000W (Model: PZEM-013)0-60000W (Model: PZEM-015).-Display format: less than 10W display as: 9.99WLess than 100W displayed as: 99.9WLess than 1000W displayed as: 999WLess than 10000W display as: 9.99kWGreater than or equal to 10000W displayed as: 19.9kw- Minimum resolution: 0.01W-Initial test power: 0.1W (Model: PZEM-013)0.2W (Model: PZEM-015)- Measurement accuracy: 1%5. Impedance:- Measuring range: 0-1000Ohm- Display format: less than 100Ohm displayed as: 99.9OhmGreater than or equal to 100Ohm displayed as: 999ohmWhen the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 0.1ohm- Measurement accuracy: 1%6. Internal resistance:- Measuring range: 0-999Milliohm-Display format: 999Milliohm When the test range is exceeded or the current is zero, "---" is displayed.- Minimum resolution: 1Milliohm- Measurement accuracy: 1%Note: Before testing the internal resistance, you need to preset the full voltage according to the battery type, and you can test it after it is fully charged; if it is not fully charged, you can set the no-load battery to the full voltage, and then test it; the internal resistance is not a fixed value, the more the battery is discharged, the more The more, the higher the resistance.7. Capacity:- Measuring range: 0-1000Ah- Display format: less than 1AH is: 999mAHLess than 10Ah displayed as: 9.99 AhLess than 100AH ​​is displayed as: 99.9ahLess than 1000AH is displayed as: 999AH- Minimum resolution: 1mAH- Measurement accuracy: 1%8. The discharge energy is represented by the battery symbol, with a total of 10 grids, and each grid represents 10% of the power.9. Energy- Measuring range: 0-9999kWh-Display format: less than 1kWh display as: 999WhLess than 10kWh displayed as: 9.99kwhLess than 100kWh is displayed as: 99.99kwhLess than 1000kWh is displayed as: 999.99kWhGreater than or equal to 1000kWh displayed as: 9999kWhReturn to zero on overflow- Minimum resolution: 1Wh- Measurement accuracy: 1%

Read more less

1. Small and easy to carry, it can be used to measure jewelry, leather, metal plate, paper, film, wire and similar materials.2. Accurate measurement and easy operation3. Material: metal4. Color: silver5. Measuring range: 0-10mm6. Measurement accuracy: 0.1mm

Read more less

1. Power supply: 230V AC 50/60Hz2. Current: 40/63A3. Over-voltage protection value range: 230-300V4. Under-voltage protection value range: 210-140V5. Installation: 35mm DIN rail6. Material: ABS + electronic components7. Size: about 8.5x6.5x3.7cm8. Weight: about 184 gramsFeatures:1. Over-voltage protection2. Under-voltage protection3. Over-current protection4. Automatic recovery5. Adjustable recovery delay time6. Voltage display (voltage measurement)7. Current display (current measurement)

Read more less

1. Material: ABS2. Power supply: rechargeable lithium battery 2000mAh3. Display mode: LED screen4. Atmospheric pressure: 86Kpa - 106Kpa5. Sampling time: 1.5 seconds6. Detection temperature: -10 to 50 degrees celsius7. Relative humidity: 20 percent to 85 percent8. Storage temperature: -10 degrees celsius to 60 degrees celsius9. 5V DC power supply for charging10. Product size: 270x90x35mm11. Weight: 268 gramsPacking list:- Host x 1- Manual x 1- Charging cable x 1

Read more less

1. Material: metal+ABS2. Support history saving3. Support temperature offset4. 4.3 inch LCD screen display, history record preservation5. Temperature unit between celsius and fahrenheit switch6. CO2 Technology: Infrared (NDIR)7. CO2 detection range: 400ppm -5000 ppm8. CO2 alarm value: 1000ppm9. CO2 alarm on/off function (if you don't like the alarm, you can manually set it to turn off)10. Power supply: rechargeable lithium battery 3000mAh11. Can detect CO2 (carbon dioxide), temperature and humidity, with clock and recording functions12. Combining infrared (NDIR) sensor with built-in fan, it can monitor carbon dioxide (CO2), temperature and humidity in real time on its digital LCD display13. Product size: 145x78x97.2mm14. Product net weight: 225 gramsPacking list:- Host x 1- Manual x 1- Charging cable x 1

Read more less

1. Base board for Compute Module 4 Lite / eMMC 2. Standard CM4 socket, with multiple peripheral interfaces, suitable for narrow application environment Specifications: 1. CM4 socket: Suitable for all variants of Compute Module 4 2. Connector: Raspberry Pi 40PIN GPIO interface x 1 3. USB: USB 2.0 Type A interface x 1 4. Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector) 5. Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants 6. Power: 5V 7. Size: 55 x 40mm Package list 1. CM4-NANO-A x1 2. 2 x 20PIN color-coded straight pinheader x 2

Read more less

1. Processor: 4 cores 2. System requirements: Android 3. Hard disk capacity: FLASH flash memory 4. Output resolution: 1080P 5. Support memory cards: CF, SD card, MINISD, U disk 6. Interface: HDMI 7. Audio playback format: MP3, WMA, WAV, OGG 8. Support video formats: ASF, AVI, VOB, MPEG, etc. 9. Support 2.4G/5GWiFi 10. Bluetooth connection is simple and fast, supporting external Bluetooth speakers, Bluetooth headsets, mobile TVs, and Bluetooth game controllers. 11. Using the latest Android 10.0 system, which is more stable than the Android 7.1 operating system. 12. Support 4k high definition. 13. Brand new upgrade, new definition, screen mirroring to mobile phone. 14. Load faster. 15. Easy to install and use: All video interfaces are available, easy to install and can be used by new and old TVS. 16. 5G dual-band Wifi: faster. 17. Using 2.4G/5G dual-band, it has strong wall-mounting capability, wider coverage and faster loading speed. 18. Support Chinese (Simplified), Chinese (Traditional), English, German, Greek, Spanish, Dutch, Vietnamese, Portuguese, Thai, French, Korean, Japanese, Arabic, Turkish 19. Packaging: Power supply x1 HDMI compatible cable x1 TV box x1 Remote control x1

Read more less

1. Made of high quality ABS composite material ,durable and practical to use2. Easy to install and just fix it in a few minutes, and save your time and money.3. Delicate and exquisite, highly matching the equipment.4. As a part of normal maintenance, it can be easily removed and replaced5. Solid and durable, long service life.Note: Dear buyer, please check your machine model carefully before purchasing the product. Unable to determine the model, please consult customer service!

Read more less

1. Mainly used to filter dust and sundries to make the hair dryer work normally2. Protect internal systems and reduce noise3. High fit without leaving gaps4. 30 mesh filter screen cover, strong interception of various dust impurities5. Suitable for Dyson HD01 HD03 HD08 hair dryer6. Dimensions: 37.7 x 47.4 x 26.4mm7. Weight: 6.1g

Read more less

1. Mainly used to filter dust and sundries to make the hair dryer work normally2. Protect internal systems and reduce noise3. High fit without leaving gaps4. 30 mesh filter screen cover, strong interception of various dust impurities5. Suitable for Dyson HD01 HD03 HD08 hair dryer6. Dimensions: 37.7 x 47.4 x 26.4mm7. Weight: 6.1gNote: UK/AU power cords are not applicable

Read more less

1. Flannel + lambskin fabric is double warm. It is also very warm when unplugged2. Hidden zipper is practical and beautiful3. Power: 10W4. Temperature range: 40-55 degrees Celsius5. Size: 27.5 x 32 x 8cm6. Weight: 330g7. USB cable length: 1.2 meters

Read more less

1. High rotation speed, long service life2. Suitable for kitchens, greenhouses, pet houses, chicken coops, tree houses and trailers, while maintaining a comfortable temperature level3. Noise: below 36dB4. Output port: USB DC 5V5. Power supply: solar energy6. Switch type: single controller7. DC wire length: 150cm8. Solar panel power: 20W9. Solar operating voltage: 24V10. Solar cells: high efficiency of single crystal cells11. Solar panel size: 145x145mm12. The solar panel is laminated epoxy resin surface, waterproof IP65 can adapt to harsh outdoor environment, improve durability13. Solar vacuum cleaner powered by solar panels, equipped with standard USB voltage regulator to maintain output, can be used in the outdoor anytime, anywhere, convenient and fast14. The conversion efficiency is high, and external solar panels can effectively convert sunlight into electricity.15. The portable exhaust fan can effectively help you to keep the indoor air circulation, keep the air clean can help you eliminate the smell of pets, tobacco, etc.16. Packaging contents: Solar panel x1, exhaust fan x117. Weight: 230g18. Hood size: about 120x120mm

Read more less

1. 12V power supply, power failure memory2. With bluetooth call and recording function, bluetooth version 5.03. Decode MP3, WMA, WAV, FLAC, APE lossless format music4. Read USB disk, support SD interface5. Support FM radio, frequency band (87.5MHZ-108.0MHZ)6. External audio input LINE IN 7. Support 10m distance infrared remote control operation8. Pushbuttons: six buttons for multi-directional control, REC / REPEAT / VOL- / AUTO / VOL+ / MODE9. Large remote control uses 2 x 7 batteries (not included), small remote control uses button batteries10. Dimensions: length 112 x width 62 mmKey operation details.1. REC: Press the REC button to start recording, press the REC button again to cancel the recording function and play the recording file; when recording than a storage device needs to be connected, e.g. U disk or TF card2. REPEAT: Press once for the single song loop function, then press again to cancel the single song loop and play in sequence3. FD-: switch to the previous folder, long press to fast back4. FD+: switch to the next folder, long press to fast forward5. AUTO button (play/pause): short press for play/pause in MP3; short press for play/pause in FM, long press for auto receive and save station; short press for play/pause in Bluetooth6. MODE button: switch between USB / SD card / FM / Audio input / Bluetooth function in sequence

Read more less

1. Compatible models: suitable for Dyson hair dryer HD08, HD01, HD02, HD03, HD04, HD08, HD152. It has two modes of smooth hair and anti-flyaway hair, which can quickly dry hair and smooth frizz at the same time, creating a glossy look3. The airflow penetrates deep into the comb teeth, detangling and smoothing the hair for easy daily styling4. Material: ABS5. Size: 13 x 10.8cm6. Weight: about 117 grams7. Note: The product is only the air nozzle, not including the hair dryer

Read more less

1. For Dyson V11 Absolute Extra, V11 Fluffy Extra, V11 Absolte Pro, V11 Absolute, V11 Fluffy, V15 Detect Total Clean, V15 detect fluffy series2. Easy to install and disassemble, highly matched with the equipment3. It is recommended to replace the spare parts every 2 to 3 months, depending on the frequency of use, to maintain the best performance of the machine4. Weight: about 101 grams5. Size: 23.5 x 5cm

Read more less

Parameter:1: Intelligent anti-burnout, 1X can withstand 600V withstand voltage2: Afterglow display technology3: 2.4 inch color display4: 100MHz analog bandwidth@500MS/s sampling rate (1X = 5MHz, 10X = 100MHz)5: One-key storage waveform6: Built-in 64M storage space, store 2000 waveform pictures7: Powerful waveform file manager, supports thumbnail browsing, viewing, detailed viewing, flipping, deleting and other functions8: The measuring voltage range is high, 1X can measure 0~80V, 10X can measure 0~800V9: 12 parameters measurement (MAX) VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Time10: Freeze waveform display at any time (pause function)11: Ultra-small size, easy to carry12: Memory compression technology, the waveform refresh screen does not flicker13: Analog bandwidth: 100MHz14: Real-time sampling rate (MAX): 500MS/s15: Vertical sensitivity: 50 mV/div ~ 100 V/div16: Horizontal time base range: 50S/div～6nS/div17: Test voltage (MAX): 80V (1X probe), 800V (10X probe)18: ADC precision: 8bits19: Coupling method: AC/DC20: Trigger mode: single, normal, automatic21: Trigger edge: rising edge/falling edge22: External trigger voltage 0-80V23: Display screen: 2.4 inches - 320x24024: Power supply: 3000mAh lithium battery25: Storage depth: 128KB26: Input resistance: 1M27: Dimensions: 114x74x33 mm28. Weight: 250 gramsDescribe:1. FNIRSI-5012H is a multi-functional, practical, and cost-effective handheld oscilloscope, suitable for maintenance industry and R&D industry, with a real-time sampling rate of FNIRSI up to 500MS/s and an analog bandwidth of 100MHz2. With a complete trigger function (single, normal, automatic), whether it is a periodic analog signal or a periodic digital signal, it can be used freely3. Built-in high voltage protection module, can withstand up to 400V continuous voltage and 600V peak voltage, don’t worry about burning out the oscilloscope if the high voltage doesn’t reach the 10X position4. Large time base scan mode for monitoring slow level changes5. Equipped with efficient one-button AUTO, the measurement waveform can be displayed without complicated adjustments6. Display high-definition LCD screen, 2.4 inches 320x240 resolution7. Extremely convenient and fast waveform storage function, built-in 64M storage space, can store 2000 pieces 8. Waveform pictures, the storage process is simple and fast, save the current waveform anytime and anywhere, just one touch, no cumbersome prompts and choices, quiet It is very convenient to save the current waveformPowerful waveform file manager, supports thumbnail browsing, viewing, detailed viewing, page turning, deletion, etc.9. Built-in 3000mah high-quality lithium battery, fully charged can be used continuously for 8 hours10. The fuselage is equipped with a high-quality silicone protective cover, which is non-toxic, lead-free and environmentally friendly, non-slip and shock-proof, fully protects the fuselage, soft in texture, and feels very comfortablePackage includes:Oscilloscope x 1High voltage probe x 1USB cable x 1Manual x 1

Read more less

Features1. Wireless pickup microphone 2.4G: wireless connection, can provide up to 48K high-fidelity recording 2. Low latency: no sense of delay recording 3. ENC is enabled by default: Excellent noise reduction performance, easy to record in noisy environments without noise interference 4. BT mode: In BT mode, it can be used for karaoke, adding background sound during recording, etc. 5. Dodging function: When connected to BT to play music, turning on the function recording can automatically suppress background Bluetooth music 6. Reverb function: Turn on the reverb to make the sound more infectious 7. Battery life: 300mAh high-capacity battery, continuous recording for 12 hours at a time.Specifications1. Product Type: Lavalier Wireless Microphone 2. Channel system: One Microphone one Receiver 3. Control method: Button 4. Active and passive: Active 5. 2.4G solution: JieLi AD6976M4 6. Working system: GFSK 7. Working frequency: 2.4G-2.4835GHZ 8. Radio sensitivity: -38db Effective distance: Greater than or equal to 10 meters 9. Transmitter shutdown power consumption: 2ua 10. Transmitter power consumption (video mode): 25ma 11. Transmitter power consumption (Bluetooth mode): 30-40ma 12. Receiver power consumption: 16ma 13. Receiver charging current for mobile phone: 1000ma 14. Microphone signal-to-noise ratio: Greater than or equal to 65db 15. Frequency response: 20Hz-20KHz 16. Monitoring: One-way monitoring 17. Microphone: Electret 18. Battery: 300mAh 19. Talk time: More than 10 hours 20. Standby time: (off state): 6 months 21. Charging input standard: DC-5V/MAX 200+/-10mA 22. Charging time: 1.5-2 hours

Read more less

1. For LG Smart TV2. Made of high-quality ABS material3. Powered by 2 AAA batteries (not included)4. Supports transmission distance of 1~8 meters5. Replace your old or broken remote control6. Ergonomic design, comfortable to use, simple and convenient7. Dimensions: 18.7x5x3.7cm8. Weight: about 90 grams

Read more less

Features:1. WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.2. Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.3. Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.4. Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.5. Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.6. WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.7. Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.Product parameters:1. Tire material: nylon wheels, rubber tires2. Body material: 5052 aluminum alloy (2mm thick)3. OLED screen: 0.91 inches4. Chassis height: 33.70mm5. Tire diameter: 80mm6. Tire width: 42.50mm7. Motor: N20 12V 200RPM x 48. Number of driving wheels: 49. Running speed: 1.25m/s10. Vertical obstacle surmounting ability: 40mm11. Drive payload: 0.8kg12. Climbing ability: 22 degrees13. Minimum turning radius: 0m (rotating in place)14. Motor power: 1.5W x 415. Remote control function: WIFI AP/STA16. Upper surface area: 17551 square millimeters17. Communication interface: UART/serial bus servo interface/I2C18. Battery support: 18650 lithium battery × 3 (delivered without battery)19. Overall dimensions: 194×168×100mm20. Weight: 860g

Read more less

1. Two ratios, 16:9 rectangular ratio, suitable for home theater, KTV, entertainment, etc.; 4:3 partial square ratio, suitable for conferences, PPT playback, education and training, etc.2. Support 4K high-definition picture quality, the picture is delicate and the color is gorgeous3. Simple and portable, foldable, easy to store and carry4. The crease can be flattened with an iron, and the dust can be wiped off with a wet towel for easy cleaning5. The perforated version with black edge has hooks, which can be installed by ropes, hooks, nails, tapes, etc., and the non-hole version has sticky strips for easy installation6. The dark side is the viewing side, and the light side is the back7. Ratio: 16:9/4:38. Material: polyester with metal coating on the surface9. Specifications: 60/72/84/92/100/110/120/130/133 inch

Read more less

1. Design with good heat dissipation, do not have to install the cooling fan or heatsink. 2. This case is constructed out of high quality aluminum material. 3. Suitable for Raspberry Pi 4 only 4. Access to all ports of Raspberry Pi 4 5. Cable interface is reserved, support to install cable. Note: Please insert the Micro SD card to Raspberry Pi before installing the case.

Read more less

1. Material: ABS, electronic components2. Uses: soil, cheese, water pH monitoring3. Measuring range: 0.00-14.00PH4. Accuracy: +/-0.1pH (at 20℃), +/-0.2PH5. Resolution: 0.01PH6. Battery: AG-13 button battery × 3 (delivery with battery)7. Working temperature: 0-50 degrees Celsius8. Correction: 1 point correction9. Product net weight: 57 grams

Read more less

1. Silicone handle cover specially designed for Pico Neo3 controller2. Use soft silica gel material to prevent foreign bodies from hitting or scratching the controller3. Fashion and beautiful appearance, comfortable feel4. Easy to disassemble and install dimensions :19 * 10 * 9.5cm5. 120 g in weight6. Shipping List: Silicone sleeve *2 hand rope *2 rocker cap *2

Read more less

1. PF8 is a noise reduction cylinder designed and processed by noise reduction sponge. The noise reduction sponge absorbs and reflects the surrounding noise, which can isolate your microphone in a quiet recording space.2. Not only can reduce the reflection of indoor recording sound, but also effectively reduce the interference of outdoor wind and environmental noise to human voice recording3. Five-sided sealing design, effectively reduce noise in different directions4. Good noise reduction, light weight, can be easily installed on different desktop small tripods, floor stands, and cantilever brackets5. Mountable microphone shell diameter: 45mm-60mm/1.77-2.36 inches6. Product size: 200 x 180 x 130mm7. Net weight: 150 grams8. Note: The product only includes the windscreen, not the microphone and stand

Read more less

1. High hardness aluminum alloy material, sturdy and durable2. Closely fit the timing belt, the stretching effect is better3. Turn the big knob to adjust at will4. Fine production, no burr, strong compatibility, wear-resistant and durable5. Material: aluminum alloy + stainless steel6. Surface treatment: anodizing7. Purpose: used to adjust the tightness of the Y-axis belt of the 3D printer and improve the positioning8. Applicable models: suitable for Ender 3 series9. Size: about 9.3 x 7x 1.25cm10. Weight: about 68 grams

Read more less

1. Material: aluminum alloy2. Working pressure: 2803. Medium: synchronous wheel4. Scope of application: 3D printer5. Features: aluminum alloy material, durable, not easy to rust, easy to install, stable transmission6. Number of teeth: 16/20 teeth7. Height: about 16mm

Read more less

1. Every family should have some at home. 2. Lightweight, easy to carry. 3. UK plug adapter, safety to use. 4. Convenient for travel and daily use. 5. Available for below plugs: US, EU plug.

Read more less

1. High precision, high reliability, suitable for high-end applications 2. Small size, can display voltage and current at the same time 3. Reverse connection protection, reverse connection will not burn, using common ground design 4. Anti-collision design with shell, more durable 5. Adopt industry standard size, more convenient to install 6. Ambient temperature: -15 to 70 degrees Celsius 7. Measuring voltage: DC0-100V, 50A 8. Working voltage: DC4.5-30V 9. Working air pressure: 80-106kpa 10. Working current: less than or equal to 20 mA 11. Precautions: Because the meter head adopts a common ground design, that is, the ground wire of the measuring end is the same as the ground wire of the electrical end, so it can only be connected between the negative pole of the device under test and the negative pole of the power supply. 12. Dimensions: 48 x 29 x 21cm 13. Weight: about 15g

Read more less