DJI Ronin Series

1. Mounted on the back of the Ronin 4D, it is used to expand the timecode interface, SDI output interface and XLR audio input interface2. When using with the Ronin 4D transmitter, you need to install the Ronin 4D body expansion board first, and then install the Ronin 4D transmitter3. Easy to install, easy to use4. Packing list: fuselage expansion board x 15. Adaptable products: DJI Ronin 4D-6K, Ronin 4D-8K

Read more less

1. Split design of head camera: support multi-form split expansion, not only reduce the weight of the handheld, and shooting more freely, while providing more diversified lens options2. Non-destructive transmission of high-speed image signals: the extension cable uses extremely thin coaxial cable, which can non-destructively transmit 8K high-speed signals captured by the X9 head camera sensor, integrated with a complete signal transmission function3. 2m gimbal camera extension cable: dramatically increase the flexibility of the camera setup, in the car, cabin and other very small space of the shuttle and transport the lens is no longer tricky, so that the gimbal camera can be used as a small movie-grade remote control head, bringing a wealth of creative space4. Quickly switch forms on set: the split form can be quickly switched on set without the need for installation tools, easily realizing multi-purpose, further improving shooting efficiency5. Support 4D control handle and monitor: adapted 4D control handle and body monitor, can be built into a small and powerful one-man shooting system, support full body control6. Handheld weight is reduced to about 1.8kg, about 34% of the weight of the whole camera, which is conducive to long-time handheld shooting, and is quite advantageous in mobile shooting scenarios, such as documentaries, interviews or events7. Adaptable products: DJI Ronin 4D8. Packing list:- Ronin 4D Flex x 1- Pan axis locking kit x 1- Ronin 4D control grip adapter module x 2- Control grip adapter module cable x 2

Read more less

1. Main material: aluminum alloy2. Two interfaces, compatible with different gimbal models3. It is more efficient to install the quick release plate in one step, and the second lock design is more secure and compatible with the Aka interface4. The side port is suitable for DJI RS 3 Pro, DJI RS 3, DJI RS 2, DJI RSC 25. The bottom interface is suitable for DJI RS 3 Mini6. It can replace original quick-installation system to realize the efficient connection between the camera and the gimbal, tripod, slide rail and other equipment7. The quick-release plate adopts anti-loosening screw design, and the screw and the camera are always in a relatively static state even under stress, which eliminates the problem of easy loosening of the traditional quick-release plate8. The quick mount is made of aluminum alloy as a whole, which is safe, stable, light, strong and durable9. Weight: 72 grams10. Dimensions: 5.5x3.8x1.75mm

Read more less

1. Long-Distance HD Live Feed:Incorporates O3 Pro video transmission technology that offers an incredible 20,000ft transmission distance at 1080p/60fps.2. Unlimited Number of Receivers:Broadcast mode allows an unlimited number of receivers, convenient for real-time monitoring by multiple teams for enhanced efficiency.3. Triple-Band Seamless Auto Hopping:Supports triple-band automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS for optimal wireless channel use.4. End-to-End Ultra-Low Latency：Use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency.5. Remote Gimbal/Focus/Camera Control:When used with Ronin 4D Hand Grips or DJI Master Wheels, you can remotely control Ronin 2, RS 3 Pro, focus, and camera functions.6. Independent Recording and Playback:1080p/60fps H.264 footage can be independently recorded and stored on a microSD card, making it easy to edit samples right on set.Specification:1. Weight: Image transmission receiver is about 350 grams (excluding antenna)2. Dimensions: 127 mm long, 87 mm wide, 26 mm high (excluding antenna)3. Power consumption: 9W4. Power supply voltage: 6-18V5. Input audio format: SDI embedded, HDMI embedded6. Output audio format: PCM7. Image transmission solution: O3 Pro8. Image transmission delay: 70 milliseconds (measured under 1080p/60fps recording specifications.)Packing list:DJI Video Receiver × 1WB37 battery adapter × 1NP-F battery adapter × 1DC to P-TAP power cable × 1SDI cable × 1USB-C cable (40 cm) × 1Ronin video transmission antenna × 2Installation tool kit × 1

Read more less

Features:1. Mirror control mode2. 1500 nits high brightness monitor3. HDMI and SDI dual signal output4. Independent recording and playback5. Remote parameter adjustment and remote controlSpecification:1. Weight: The image transmission highlight monitor is about 727 grams (excluding antenna)2. Dimensions: 213 mm long, 135 mm wide, 51 mm high (excluding antenna)3. Battery life: 2 hoursWorking frequency:When using the image transmission transmitter with an image transmission highlight monitor:Non-DFS bands:2.400 GHz to 2.484 GHz5.150 GHz to 5.250 GHz5.725 GHz to 5.850 GHzDFS band:5.250 GHz to 5.350 GHz5.470 GHz to 5.600 GHz5.650 GHz to 5.725 GHzPacking list:Image transmission highlight monitor × 1Image transmission monitor hood × 1NP-F battery adapter board (RX) × 1WB37 smart battery × 1WB37 Charging Manager (USB-C) × 11.5mm ball head hex wrench × 1

Read more less

1. Long-Distance HD Live Feed:Incorporates O3 Pro video transmission technology that offers an incredible 20,000ft transmission distance at 1080p/60fps.2. Unlimited Number of Receivers:Broadcast mode allows an unlimited number of receivers, convenient for real-time monitoring by multiple teams for enhanced efficiency.3. Triple-Band Seamless Auto Hopping:Supports triple-band automatic frequency hopping between 2.4 GHz, 5.8 GHz, and DFS for optimal wireless channel use.4. End-to-End Ultra-Low Latency：Use the same chip solution as Ronin 4D, with every link explicitly optimized to provide end-to-end ultra-low transmission latency.5. Remote Gimbal/Focus/Camera Control:When used with Ronin 4D Hand Grips or DJI Master Wheels, you can remotely control Ronin 2, RS 3 Pro, focus, and camera functions.6. Independent Recording and Playback:1080p/60fps H.264 footage can be independently recorded and stored on a microSD card, making it easy to edit samples right on set.Specification:1. Weight: Image transmission transmitter is about 350 grams (excluding antenna)2. Dimensions: 127 mm long, 87 mm wide, 26 mm high (excluding antenna)3. Power consumption: 11W4. Power supply voltage: 6-18V5. Input audio format: SDI embedded, HD-MI embedded6. Output audio format: PCM7. Image transmission solution: O3 Pro8. Image transmission delay: 70 milliseconds (measured under 1080p/60fps recording specifications.)Packing list:DJI video transmitter × 1WB37 battery adapter board (TX) × 1NP-F battery adapter board × 1Ronin image transmission antenna × 2USB-C cable (40 cm) × 1SDI cable × 1DC power cord × 1DC to P-TAP power supply cable × 1USB-C image transmission cable × 1RS pan/tilt mounting plate × 1Installation tool kit × 1

Read more less

1. Control handle can be wired to control the PTZ to realize long-distance focusing, video recording, joystick and other control functions.2. Remote power supply can be realized through the head power supply adapter and battery power supply adapter with the handle battery.3. It is more suitable for car, rail, ropeway, jib and other shooting scenes4. Adaptable products: for DJI RS 2 / RS 3 Pro5. Packing list:- Head power adapter × 1- Base plate x 1- 1/4 inch-20 screws x 5- Battery adapter x 1- Control cable (30 cm) x 1- Control cable (5m) x 2- Control handle x 1- Control handle communication interface adapter x 1- Wrench (4 mm) x 1- Safety catch x 1- Wrench (2.5 mm) x 1- Reinforcement bar x 1

Read more less

1. Used to connect the camera HDMI connector (D port) to the HDMI connector of the DJI Ronin Hawkeye Mapper for camera image transfer2. Please visit the Ronin Series Compatibility Search at dji.com to see supported camera models and functions3. Adaptable products: suitable for DJI RS 3 Pro, RS 3, RS 2, RSC 24. Packing list: 20cm cable x 15. Length: about 20cm

Read more less

1. The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbal's tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera.2. Weight: 70 g3. Dimensions: 113×49.5×22 mm (L×W×H)4. Compatibility:--DJI RS 4--DJI RS 3--DJI RS 2Packing list:Lower Quick-Release Plate × 1

Read more less

1. The battery grip can power DJI RS 4 Pro for up to 29 hours or DJI RS 4 for up to 29.5 hours. It also supports powering your camera and accessories with up to 18 watts via the USB-C port at the bottom, catering to prolonged creative sessions.2. Charging Input Voltage: 16.8V 4A3. Rated Capacity: 4800 mAh4. Rated Energy: 69.12 Wh5. Compatibility:--DJI RS 4 Pro--DJI RS 4--DJI RS 3 Pro--DJI RS 3Packing list：RS BG70 High-Capacity Battery Grip × 1

Read more less

1. The motor speed has increased by 30% for more responsive control over focus, zoom, and aperture. The motor is compatible with 15mm universal rods. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port.2. 2.4GHz Transmitter Power (EIRP): ‌< 20 dBm (CE/SRRC/MIC), < 26 dBm (FCC)3. 2.4GHz Transmission Distance: 160 m/100 m4. Dimensions: 100×61×34 mm (L×W×H)5. Weight: 123 g6. Rod diameter: 15 mm7. Output gear teeth: 308. Output gear module: 0.8Compatibility:DJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI Focus Pro GripDJI Focus Pro Hand UnitDJI Ronin 4D FlexTips:1. The motor can be powered through third-party devices. Do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage.2. DJI RS 4 Pro can be used with up to two motors simultaneously, while DJI RS 4 only supports one motor.Packing list:Focus Pro Motor × 1Motor Rod Mount Kit × 1Focus Gear Strip × 1Multi-Camera Control Cable (USB-C, 30 cm) × 1FIZ Sticker × 1‌15mm Rod × 110mm 1/4"-20 Screw × 2

Read more less

1. The upper quick-release plate has added an adjustable placement guide, which fits flush against the bottom of the camera to serve as a stopper. Even when used with a single 1/4" screw, it can secure the camera in place, preventing loosening or shifting.2. Weight: 32 g3. Dimensions: 55×38×16.3 mm (L×W×H)4. Compatibility:--DJI RS 4 Pro--DJI RS 4--DJI RS 3 Pro--DJI RS 3--DJI RS 2Packing list:D-Ring Camera Mounting Screw 1/4"-20 × 1Screw 1/4"-20 × 1Upper Quick-Release Plate × 1

Read more less

1. The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbal's tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera.2. Weight: 80 g3. Dimensions: 129.6×49.5×22 mm (L×W×H)4. Compatibility:DJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI RS 2Packing list:Lower Quick-Release Plate × 1

Read more less

1. The hand unit features a built-in RF module and supports wireless communication with the DJI Focus Pro Motor from up to 160 meters away. It supports FIZ control over the focus, aperture, and zoom, and features real-time, stepless damping adjustment to balance comfort and precision.2. Transmitter Power: less than 20 dBm (CE/SRRC/MIC), less than 26 dBm (FCC)3. Dimensions: 128×87×87 mm (L×W×H)4. Weight: 555 g (without battery)5. Static Power Consumption: 0.83 W6. Operating Temperature: -20-45 degrees celsius (-4-113 Fahrenheit) (excluding battery temperature)Compatibility:--DJI Focus Pro Motor--DJI Ronin 4D（Requires the DJI High-Bright Remote Monitor）--DJI Inspire 3（Requires the DJI High-Bright Remote Monitor）Tips: the hand unit utilizes the NP-F550 battery model commonly available on the market. The dimensions should be 71×38.6×21.1 mm (L×W×H). Make sure to purchase batteries according to these specified dimensions.Packing list:Focus Pro Hand Unit × 1D-TAP to USB-C Power Cable (50 cm) × 1Replaceable Focus Marking Ring × 4

Read more less

1. Specially designed for DJI RS4/ RS4 Pro series, it can accommodate standard suits and self-media suits; 2. ABS material, hard shell design, wear-resistant and drop-resistant; 3. Highly tight and waterproof, can withstand repeated watering tests; 4. High-density sponge, good flexibility, easy to store accessories; 5. Portable handle, strong bearing capacity, comfortable hand feel, relieve hand pressure. 6. Size: 460x345x149mm 7. Weight: 2700g

Read more less

1. High definition and high transparency, lossless image quality. 99% high light transmittance, clearly restoring the rich colors of the camera.2. 9H high hardness, explosion-proof and scratch-proof. Effectively prevent sharp objects from causing scratches and damage to the screen surface.3. Anti-fingerprint, anti-oil and anti-dust. Effectively protect your camera screen and lens from dust, oil, and fingerprints.4. 0.33mm ultra-thin, restoring the touch of bare metal. The touch control is highly sensitive, comparable to the touch screen experience of bare metal.5. Material: Tempered glass + PET

Read more less

1. Specially designed to be used with DJI Ronin RS4, and can also store the Ronin RS4 and its accessories. 2. PU material, one-piece molding, stylish appearance, small size but large capacity 3. The internal Lycra fabric can better protect your drone 4. Portable design, easy to carry 5. Two-way zipper, smooth and not stuck 6. It fully protects the device from general scratches, dirt and wear and tear 7. Made of nylon fabric webbing, easy to adjust the length, lightweight and wear-resistant

Read more less

1. Double zippers head for easy and quick open or locking2. Made of high quality anti-splash fabric, soft color, scratch-resistant and wear-resistant, durable and breathable3. Tripod Storage,including Magic type to fix the tripod, more safe and convenient.4. The inside mesh bags allow to store some small accessories, such as SD card, cable adapters.5. Multi-layer storage, different space functions, classified storage6. Circulation of air, keep the back dry, reduce the pressure on the back, light, heat, comfortable and breathable.

Read more less

1. Material: Aluminum alloy2. Suitable for Ronin RSC 2/S/SC3. Function: You can adjust the angle, expand the light, microphone, monitor, etc.4. Features: Multiple expansion interfaces, comfortable to hold5. Interface: 1/4 screw hole, 3/8 screw hole, hot shoe seat6. Process: CNC cutting process7. There is a soft pad inside to protect the camera from scratches8. Loosen the knob to adjust the angle9. Non-slip handle, comfortable to hold10. Size: About 33 cm11. Weight: 258 grams

Read more less

1. A special strap for DJI RONIN RS2 / RSC 2, which solves the problem that the strap cannot be used without a strap hole in the hand 2. Equipped with M4 screws, which are firm and reliable, realize a variety of carrying methods, reduce shooting pressure 3. CNC finishing, beautiful and durable, shipped with M3 wrench, can be disassembled at will 4. The strap is adjustable to handle complex shooting techniques Packing list: 1. Thick lanyard x 1 2. Lanyard adapter board x 1 3. Allen wrench x 1 4. M4x8 screw x 2 5. Packing box

Read more less

1. Easy to use and easy to install 2. Equipped with rocker, control buttons and multiple universal mounting interfaces, the Ronin-S universal adapter can be used to remotely control the stabilizer through the cable, which has good expandability. 3. With different vehicles to achieve a personalized shooting solution, such as a small rocker arm for remote control, flexible and portable. 4. The side 8 pin connector can be used to connect the Ronin-S with the focus wheel and the Ronin-S pan/tilt control module. 5. Provide portable and low-cost rocker, car, and rail solutions 6. Control handle weight: 250 grams 7. Signal control line (5 meters) weight: 202 grams Packing list Control handle x1 Long rocker x1 Signal control line (5 m) x1

Read more less

1. Effectively provide gimbal location information and speed information to provide reference for PTZ attitude calculation 2. Improve the stability of the pan/tilt during rapid acceleration, reducing the skew of the picture 3. Weight: about 38 g 4.GNSS: GPS + GLONASS dual mode 5. Working voltage: 12 V 6. Input current: 60 mA 7. Size: 5x5x7cm Packing list External GPS module x 1 Accessory adapter plate x 1 M4 screw x 4 1/4"-20 screw x 2

Read more less

1. Easy to use and easy to install 2. High quality materials, safe to carry 3. The component is mounted on the NATO interface of the R-S or Vision SC dual-handle crossbar kit to mount the monitor screen accessory for shooting. 4. The fixed angle of the monitor screen can be adjusted to meet different shooting needs. It is also possible to install a shadow S/SC phone holder or other equipment and accessories with a 1/4" threaded connection. 5. Adjustable monitor screen fixed angle 6. Weight: 73 grams Packing list Monitor screen fixing unit x 1 3/16' wrench x 1

Read more less

1. Easy to use, easy to install 2. The camera can be mounted vertically for shooting, or the counterweight can be used when installing the camera in landscape orientation for a more flexible camera mounting solution. 3. Equipped with cross-roller arm weight clips and a variety of counterweight mounting structures to meet the installation requirements of equipment in different scenarios. 4. Provide a rich screw hole for flexible weight installation. 5. L type vertical quick release plate and counterweight mounting assembly (without weight): 203 grams Counterweight: about 900 grams 6. Size: 20x20x10cm Tips Counterweights and other accessories will also increase the load on the gimbal. When using it, do not exceed the total weight of the stabilizer test load. Packing list L-type adapter plate x 1 L-shaped support plate x 1 Roller arm weight clamp x 1 Counterweight mounting rail x 1 200 g weight block x 3 100 gram weight x 3 1/4' screw x 2 3/16' wrench x 1

Read more less

1. Easy to use and easy to install 2. High quality materials, safe to carry 3. The adapter adapter plate is equipped with a 1/4"-20 threaded hole for mounting to the camera hot shoe module or M4 tapped hole for fixing the GPS module and DJI professional wireless receiver. 4. Applicable to such as S, such as shadow SC, DJI master wheel three-axis version, DJI master wheel two-axis version, DJI somatosensory controller professional version, DJI professional wireless receiver 5. Size: 5x5x7cm

Read more less

1. Roin-S extension clamp mount adapter only for DJI Ronin-S stabilizer. 2. Made of metal alloy, solid and durable to provide security for mounting accessories. 3. 1/4 screw hole enables you to mount a monitor, microphone or LED video light, also can be used with magic arm. 4. Easy to set and remove. 5. Connecting to Smartphone, tablet, Crystalsky monitor, real-time displays the shooting pictures.

Read more less

1. Made of quality aluminium alloy, high strength, anti-rust, wear-resistant and durable. 2. Lightweight and mini, will not add much too weight or burden to the stabilizer. 3. Comes with tools, easy to install, it has heavy duty can offer stable support for other accessories. 4. Can be used for holding magic arm, monitor, etc. It a nice accessory for DJI Ronin S. 5. It is a good accessory for photography lovers. 6. Size: 40mmx52mmx15mm, Weight: 22g 7. Packing list: Expansion module x1, screw x2, screwdriver x1

Read more less

1. Special lanyard, with screws, quick disassembly 2. High elastic decompression to reduce shooting fatigue 3. The strap is adjustable to handle complex shooting techniques 4. Material: high elasticity waterproof foam 5. Size: 38.5x7.8cm

Read more less

1. Spesically design for DJI Ronin-S, hard shell design, wear-resistant and drop-resistant 2. Highly tight waterproof, can withstand repeated watering test; 3. High-density sponge, good flexibility, easy to store the drone body and its accessories 4. Portable handle, strong bearing capacity, comfortable hand feeling, relieve pressure 5. Material: PP+EVA 6. Size: 634x503x227mm 7. Weight: 7KG

Read more less

1. Easy to use, just plug and play. 2. Use with the USB data cable of the camera to connect the camera control interface of Ronin-s and the camera. 3. Realize the control function through the camera control button of Ronin-s. 4. Size: 10x5x5cm 5. Weight: 50g

Read more less