Live Equipment

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

1. Material: aluminum alloy2. Function: live broadcast, recording, singing, sound card, charging3. Interface: Type-C + double 3.5mm4. Control: Support adjusting the volume of earphones and monitoring5. Performance: Support live streaming and charging at the same time6. Charging: Support 5V/2.4A and 20V/3A7. Compatible: devices supporting 8 Pin and Type-C interface8. Sound effect: stereo9. Compatible with most live streaming apps on the market10. Hi-Res lossless sound quality, equipped with digital audio decoding chip, audio sampling rate up to 21Bit/384KHz11. Product size: 68.6 x 48 x 10.5mm12. Net weight: 40 gramsPacking list:-Converter x 1-Audio cable x 1-Type-C/USB-C to Type-C/USB-C x 1-Type-C/USB-C to 8 Pin x 1

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Features1. 550-580MHZ;2. Full Metal Bodypack Receiver;3. Strong signal, ultra-high frequency;4. Digital key lock technology to avoid possible interference, adjustable frequency5. Receiving distance: 80-100 meters;6. Audio output: MonoLong distance 75M-100M1. The metal fanny pack is more stable to receive.2. The XTUGA IEM1100 in-ear monitor and receiver system provides stage monitoring with a wireless range of up to 250 feet.IEM1100 Wireless In-Ear Monitor System1. The wireless ear monitoring system is used for stage performances and audio broadcasting, and can replace traditional and complicated monitoring equipment to achieve good monitoring effects.2. Adopt the latest high-frequency transmission and audio signal dynamic processing technology, and improve the signal-to-noise ratio of the dynamic range at the same time, so that the system has good anti-interference performance and shows a good original sound again.3. 40 frequencies can be preset in the 32MHZ frequency band, which can be switched arbitrarily.4. Adopt advanced circuit design to eliminate the receiving dead angle and make the system receive signal stable. The system is highly resistant to drops thanks to the tough metal housing. It is a good choice for stage performance monitoring products.

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Product Introduction1. This device is a wireless in-ear monitor system used in stage performances and audio broadcasting. It can replace traditional complex audio monitoring device and achieve excellent monitoring effect .2. The device can have good anti-interference and stability, with the new high-frequency transmission and audio signal dynamic processing technology. The device improves the signal-to-noise ratio and dynamic range, so that it can show the perfect reproduction of the original sound.3. Lock screen: Stop pressing any button for 10 seconds during normal operation, the screen will turns offff automatically.4. 40 Frecuency: In the 32MHz frequency band, the device can be freely switched between 40 preset frequencies.Features1. 572-603MHZ;2. 4 groups of frequencies, each group of 10 frequency points, each frequency point can be connected to countless individual pockets;3. The host has Bluetooth and USB functions;4. All-metal bodypack receiver, type-c charging;5. Two-channel XLR male +6.35 input;6. Receiving distance: 80-100 meters;7. Output: stereo/mono;8. Packing: Aluminum box

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

1. Professional Level UHF Wireless Microphone system:Professional UHF microphone system delivers clear and lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver,Fixed frequency,Group A 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz,superior anti-interference ability.Upgraded wireless signal acquisition, 2 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accurac2. Robust Design And High-Quality Sound: Sturdy all metal construction for Quad-channel UHF wireless microphone receiver and high sensitivity unidirectional bodypack mics, suitable for heavy use. High quality dynamic cartridge is specially engineered to limit feedback and interference, picking up sound smoothly and transmitting sound hassle-free. Deliver clear, robust, true sound3. Simple And Convenient Operation: Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance,Also The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more4. Stable Transmission Technology And Versatile Use: Professional wireless microphone system. Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it good choice for any outdoor event such as party, wedding, speech, conference, small gigs, karaoke.With an operating range of up to 300 FtSpecifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz3. Fixed frequency4. Receiving distance: 50 meters

Read more less

1. Professional Level UHF Wireless Microphone system:Professional UHF microphone system delivers clear and lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver,Fixed frequency,Group A 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz,superior anti-interference ability.Upgraded wireless signal acquisition, 2 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accurac2. Robust Design And High-Quality Sound: Sturdy all metal construction for Quad-channel UHF wireless microphone receiver and high sensitivity unidirectional bodypack mics, suitable for heavy use. High quality dynamic cartridge is specially engineered to limit feedback and interference, picking up sound smoothly and transmitting sound hassle-free. Deliver clear, robust, true sound3. Simple And Convenient Operation: Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance,Also The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more4. Stable Transmission Technology And Versatile Use: Professional wireless microphone system. Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it good choice for any outdoor event such as party, wedding, speech, conference, small gigs, karaoke.With an operating range of up to 300 FtSpecifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz3. Fixed frequency4. Receiving distance: 50 meters

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

1. Professional Level UHF Wireless Microphone system:Professional UHF microphone system delivers clear and lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver,Fixed frequency,Group A 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz,superior anti-interference ability.Upgraded wireless signal acquisition, 2 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accurac2. Robust Design And High-Quality Sound: Sturdy all metal construction for Quad-channel UHF wireless microphone receiver and high sensitivity unidirectional bodypack mics, suitable for heavy use. High quality dynamic cartridge is specially engineered to limit feedback and interference, picking up sound smoothly and transmitting sound hassle-free. Deliver clear, robust, true sound3. Simple And Convenient Operation: Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance,Also The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more4. Stable Transmission Technology And Versatile Use: Professional wireless microphone system. Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it good choice for any outdoor event such as party, wedding, speech, conference, small gigs, karaoke.With an operating range of up to 300 FtSpecifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz3. Fixed frequency4. Receiving distance: 50 meters

Read more less