New Arrivals

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

1. Waveform length: 20482. Point waveform sampling rate: 266MSa/s3. Waveform vertical resolution: 14 bits4. Amplitude resolution: 1mV5. Waveform output impedance: 50 ohms (typical)6. Protection: All signal output terminals can work within 60 under load short circuit conditions7. Sweep channel: CH1 or CH28. Sweep type: linear sweep, logarithmic sweep9. Sweep time: 0.1s~999.9s10. Input signal voltage range: 2Vpp~20Vpp11. Pulse width measurement: 0.01us resolution, measurable 20s (MAX)12. Period measurement: 0.01us resolution, measurable 20s (MAX)13. Burst function pulse number: 1-104857514. Count range: 0-429496729515. Coupling mode: DC and AC16. Counting mode: Manual17. TTL/CMOS output: Low level 0.3V; High level 1V~10V18. Burst mode: Manual trigger, CH2 trigger, external trigger (AC), external trigger (DC)19. Number of storage: 100 groups20. Position: 00 to 99 (00 storage position parameter is transferred by default when the power is turned on)21. Number of arbitrary waves: 60 groups from 1 to 60 (15 groups are default when the power is turned on)22. Interface mode: USB to serial interface23. Extension interface: Serial port with TTL level mode, convenient for users to carry out secondary development24. Communication rate: Standard 115200bps25. Communication protocol: Command line mode is adopted, and the protocol is open26. Voltage range: DC5V27. Prompt sound: Users can turn it on or off through program settings28. Adopt 2.4-inch high-definition color LCD display, smooth operation and fast response speed29. The shortcut keys made of silicone material not only greatly simplify the operation steps, but also feel comfortable30. Provide host computer software and communication protocol to facilitate customer secondary development. The host computer software has the function of drawing arbitrary waveforms31. Adopt high-quality aluminum alloy shell, small size, easy to carry, with a 5V2A mobile power supply (not included) can achieve long-term outdoor work32. The dual channels with equal performance can output the same or different function signals or arbitrary waveform signals at the same time. All parameters can be adjusted independently. The phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees33. Sine wave, square wave, sawtooth wave, or arbitrary wave can be used to generate pulse trains. The number of pulse cycles is continuously adjustable from 0 to 104857534. The pulse width and pulse cycle time of the pulse wave are digitally and accurately adjustable35. The host computer software and communication protocol are provided free of charge. Any waveform can be drawn using the host computer software; secondary development programming can be performed using the communication protocol; all functions of the instrument can be controlled using the host computer software (all operations can be completed on a standalone machine without connecting to a computer)36. Dimensions: 143x95x54mm37. Weight: 400gSpecification: Package Weight One Package Weight 0.80kgs / 1.77lb One Package Size 23cm * 17cm * 11cm / 9.06inch * 6.69inch * 4.33inch Qty per Carton 12 Carton Weight 10.70kgs / 23.59lb Carton Size 48cm * 36cm * 35cm / 18.9inch * 14.17inch * 13.78inch Loading Container 20GP: 440 cartons * 12 pcs = 5280 pcs 40HQ: 1023 cartons * 12 pcs = 12276 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

1. Sine wave measurement effectively eliminates the influence of test leads and contact resistance2. Two functional interfaces, battery sorting function3. Built-in 100mAh battery, low power consumption + multiple energy-saving options4. Test range up to 200 ohms5. Good accuracy, fast response, both positive and negative can be measured, high sensitivity6. Adjustable range, easy operation7. Bilingual option, fully meet the use requirements8. Lithium battery voltage can be displayed as 0.0001V, sensitive response9. All ranges are positive and negative voltage measurements, the range can be selected as automatic or manual program control according to your needs, easy to operate10. Ordinary lead-acid batteries, lithium batteries, nickel-metal hydride batteries, nickel-cadmium batteries, lithium iron phosphate batteries and battery packs not exceeding 45V can be measuredSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 21cm * 12cm * 15cm / 8.27inch * 4.72inch * 5.91inch Qty per Carton 12 Carton Weight 5.00kgs / 11.02lb Carton Size 44cm * 38cm * 32cm / 17.32inch * 14.96inch * 12.6inch Loading Container 20GP: 498 cartons * 12 pcs = 5976 pcs 40HQ: 1157 cartons * 12 pcs = 13884 pcs

Read more less

1. A variety of fast charging protocols automatically detect fast charging identification test, to meet the needs of various types of cell phone users2. Multi-group data recording battery capacity detection3. When the power supply to the notebook, you can real-time monitoring of charging voltage and current and other parameters of information4. Through the multifunctional key short press switch interface to the hibernation interface for the closed display, but also normal charging to the device at night charging, does not affect the sleep, stand-alone key to re-wake up the displayParameters:1. Voltage measurement range:4.5V-36.0V2. Current measurement range: 0-5A/0-8A3. Capacity totalization range:0-99999mAh4. Power accumulation range:0-99999mWh5. Power measurement range:0.00-150W6. Impedance measurement range: 1-999.9Ohm7. Temperature measurement range: 0-80 degrees celsius8. Timing time: 999 hours and 59 minutes9. Input interface: 5A high current USB interface/Type-C interface10. Output interface: USB/Type-C11. Voltage range: OV-2.99V12. Refresh time: more than 500mS/time13. Measurement rate: about 0.5 times/second14. Display type: IPS true-color digital LCD screen15. Self-consumption current: less than 0.02A16. Operating temperature: -10-60 degree celsius17. Operating humidity: 10-80 (no condensation)18. Working air pressure: 80-106kPaSpecification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 10cm * 7cm * 3cm / 3.94inch * 2.76inch * 1.18inch Qty per Carton 250 Carton Weight 9.00kgs / 19.84lb Carton Size 51cm * 38cm * 32cm / 20.08inch * 14.96inch * 12.6inch Loading Container 20GP: 429 cartons * 250 pcs = 107250 pcs 40HQ: 998 cartons * 250 pcs = 249500 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

Features:On Appearance1. LED display, more friendly interface;. LED matrix light, simple display, energy saving, protect your eyes.2. Touch buttons to make simple operation.3. The ultra-thin embedded panel perfectly fits all kinds of walls; The visiable thickenss above the wall is only 12.4mm.4. Frameless acrylic panel design, simple and elegant;5. Classic black/white color scheme, seamlessly integrated.6. Compatible with standard 86mm square cassettes and 60mm European cassettes to meet all installation environments;7. Interlock to connect gives you easy installation.On Functionality1. Strict temperature control accuracy (+/1 degree C) to provide the warmth you want;2. Power off protection, save all your settings safely;3. Preset adjustment of 7days mode in a week, programmable setting of 6 time periods a day, green energy saving, Less cost, more intelligent and environmental protection;4. Support the creation of product local groups/shares to achieve unlimited centralized control of the number of products/ multi-terminal control;5. Good access: Suitable for ALEXA/GOOGLE HOME /HOMEKIT /APPLE HOME, full experience new voice control method;Specification:1. Power Supply: 95~240 VAC, 50/60Hz or 24V DC/AC, 50/60Hz (Please check the information laser printed on the back of the thermostat for the actual voltage.)2. Current Load: 3A (water heating, water gas boiler), 16A (electric heating)3. Sensor: NTC3950, 10K4. Accuracy: +/-1 degree C5. Set Temp. Range: 5-35 degree C6. Room Temp. Range: 5~70 degree C7. Display Temp. Range: 5 ~70 degree C8. Ambient Temp.: 0~ 45 degree C9. Ambient Humidity: 5 ~ 95% RH (Non Condensing)10. Storage Temp.: -5~ 45 degree C11. Power Consumption: Less than 1. 5W12. Timing Error: Less than 1%13. Shell Material: PC +ABS ( Fireproof)14. Installation Box: 86 x 86mm Square or European 60mm Round Box15. Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm216. Protection Class: IP2017. Buttons: Knob + Capacitive Touch Buttons18. 2.4G WiFiSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 12cm * 10cm * 6cm / 4.72inch * 3.94inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 52cm * 25cm * 32cm / 20.47inch * 9.84inch * 12.6inch Loading Container 20GP: 641 cartons * 50 pcs = 32050 pcs 40HQ: 1488 cartons * 50 pcs = 74400 pcs

Read more less

1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div～10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1EU power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 1.70kgs / 3.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.50kgs / 9.92lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs 40HQ: 2576 cartons * 2 pcs = 5152 pcs

Read more less

1. The oscilloscope has a real-time sampling rate of 1GSa/s and an analog bandwidth of 100MHz x 22. Complete trigger function (single/normal/automatic), both periodic analog signal and non-periodic digital signal can be used freely3. Built-in DDS function signal generator and the industrys original chopping output (@2.5vpp), all signal frequency steps are 1Hz, support 14 kinds of standard function signals and a customizable chopping signal, the chopping output device intercepts part or all signals4. The complex signal measured by the oscilloscope is used as the output signal of the signal generator, which can store up to 1000 custom cut-off signals5. The built-in high-voltage protection module can withstand continuous voltage up to 400V, so there is no need to worry about the oscilloscope burning accident caused by the probe not moving to the 10x position7. Large time base scrolling method, which can monitor slow level changes8. Equipped with an efficient one-key automatic display of measurement waveforms, without cumbersome adjustments9. 7-inch 800x480 resolution high-definition LCD display10. Cursor measurement function, when manually reading the amplitude and frequency parameters, there is no need to read the background scale unit and quantity, no need to convert, and directly obtain the peak-to-peak value and frequency. Very convenient screen capture and waveform storage function10. Built-in 1GB storage space, can store 1000 screenshots + 1000 sets of waveform data, the storage process is simple and fast, save the current waveform with one key11. Powerful waveform image manager, supports thumbnail browsing, viewing, viewing details, page turning, deletion, and waveform zooming in, zooming out, moving, etc., which is convenient for secondary analysis12. The fuselage is equipped with a USB interface, which can be connected to a computer to realize the sharing of screenshots and pictures of itself, which is convenient for secondary analysis13. Graphical display function, which can compare and judge the amplitude, frequency and phase of two groups of signals14. The FFT viewing function can estimate the harmonic components of the signal15. Built-in DDS signal generator, supports 12 kinds of function signals16. For high intelligent decoding algorithm, the encoder has unlimited life, intelligent anti-burn function, 1X can withstand 400V withstand voltage17. With 100MHz x 2 analog bandwidth and @1GSa/s sampling rate (1X = 5MHz, 10X = 100MHz)18. High measurement voltage range: 1X can measure 0~40V, 10X can measure 0~400V19. Up to 12 parameters measurement: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period20. Cursor measurement function: convenient for manual measurement of period, frequency and voltage =21. Perfect trigger function (single, normal, automatic), freeze waveform display at any time (pause function)22. With screen brightness adjustment function and background grid brightness adjustment function, easy to carry23. Material: ABS24. Analog log bandwidth: 100MHz x 225. Number of channels: 2 channels26. Real-time sampling rate: 1GSa/s27. Vertical sensitivity: 50 mV/div ~ 500 V/div28. Horizontal time base range: 50S/div～10nS/div29. Test voltage: 40 V (1X probe), 400 V (10X probe)30. Storage depth: 240Kbit31. Input resistance: 1 milliohm32. ADC precision: 8bits33. Coupling method: AC/DC34. Trigger mode: single, normal, automatic35. Trigger edge: rising edge/falling edge36. External trigger voltage: 0~40 V37. Expansion port: USB image exportPacking list:FNIRSI-1014D Oscilloscope host x 1Matched 100MHz probes (1X and 10X) x 2Clip x 1EU power adapter x 1USB cable x 1English user manual x 1P4100 probe (optional) x 1Specification: Package Weight One Package Weight 1.70kgs / 3.76lb One Package Size 37cm * 20cm * 13cm / 14.57inch * 7.87inch * 5.12inch Qty per Carton 2 Carton Weight 4.50kgs / 9.92lb Carton Size 39cm * 22cm * 28cm / 15.35inch * 8.66inch * 11.02inch Loading Container 20GP: 1110 cartons * 2 pcs = 2220 pcs 40HQ: 2576 cartons * 2 pcs = 5152 pcs

Read more less

1. Measurement channel: dual channel2. Main unit measurement range: -200 ~ +1372 degrees Celsius (-328 ~ 2501 degrees Fahrenheit)3. Standard K-type probe: -20 ~ 200 degrees Celsius, K-type metal probe: -50 ~ 500 degrees Celsius4. Temperature display: 4-digit display, 9999 (MAX)5. High alarm: default 1300 degrees Celsius6. Low alarm: default -200 degrees Celsius7. ADJ temperature compensation: -9 ~ +9 degrees Celsius8. Sampling rate: 1 time/second9. Automatic shutdown: 10 minutes (can be turned off manually)10. Operating environment: 10~50 degrees Celsius, 80%RH (MAX), indoor altitude less than 2000m11. Power supply: 3 x 1.5V AAA (Not included)12. Dimensions: 152x55x33 mmSpecification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 22cm * 10cm * 6cm / 8.66inch * 3.94inch * 2.36inch Qty per Carton 20 Carton Weight 10.70kgs / 23.59lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 20 pcs = 11320 pcs 40HQ: 1314 cartons * 20 pcs = 26280 pcs

Read more less

1. Range: auto/manual2. Display: 9999 words3. Power supply: 18650 battery 4000mAh4. Input voltage: 400V (DC+AC peak) MAX5. AC current ACA: 10uA~10A6. DC current DCA: 10uA~10A7. AC voltage ACV: 0.01mV~750V8. DC voltage: DCV0.01mV~1000v9. Resistance: 0.1~100 milliohms10. Capacitance: 0.01nF~10000uF11. Frequency: 0.1Hz~5MHz12. Temperature: -20~1000 degrees Celsius13. Bandwidth: 10MHz14. Record length: 64Kbyte (k)15. Sampling rate range: 1.5Sa/s=48MSa/s16. Waveform interpolation: (sinx) x17. Scan rate range: 50ns/div=20s/div18. Time base accuracy: 20ppm19. Three measurement modes- Automatic: automatic triggering will collect and refresh waveform records in real time, and will not retain the waveform- Normal: when the amplitude of the collected signal reaches the set trigger level value, the trigger system will lock the waveform and keep it displayed on the screen. The oscilloscope is still collecting. When it is triggered again, the waveform on the screen will be updated to the current waveform again, which is a continuous trigger- Single: when the amplitude of the collected signal reaches the set trigger level value, the trigger system will lock the waveform and keep it displayed on the screen. When the waveform acquisition is completed, the STOP state is displayed, and the oscilloscope stops signal acquisition; if you need to trigger again, press HOLD to cancel STOP and enter the waiting trigger state21. TYPE-C data cable connects to the DC 5V output adapter for charging22. Long press for 2 seconds to turn on and off, short press to enter relative value measurement23. The screen uses a 2.8-inch IPS full-view color screen24. Oscilloscope square wave output terminal, permanent output 3V/1KHZ signal square port is ground output metal end round port is signal output metal end25. Dimensions: 180x90x45mm26. Net weight: 348gSpecification: Package Weight One Package Weight 0.50kgs / 1.10lb One Package Size 21cm * 17cm * 7cm / 8.27inch * 6.69inch * 2.76inch Qty per Carton 50 Carton Weight 25.30kgs / 55.78lb Carton Size 58cm * 42cm * 36cm / 22.83inch * 16.54inch * 14.17inch Loading Container 20GP: 304 cartons * 50 pcs = 15200 pcs 40HQ: 705 cartons * 50 pcs = 35250 pcs

Read more less

1. CO2 measurement range: 0-9999ppm (2001~9999ppm reference value)2. Temperature measurement range: -10-60 degrees Celsius (14-140 degrees Fahrenheit)3. Relative humidity measurement range: 0.1%~99.9%RH4. Dew point temperature measurement range: -20.0~59.9 degrees Celsius5. Wet bulb temperature measurement range: -5.0~59.9 degrees Celsius6. Resolution: 1ppm, 0.1 degrees Celsius/degree Fahrenheit, 0.1%RH7. Warm-up time: 30 seconds8. Power supply: 4xAA (not included)9. ??Dimensions: 205x70x56mm10. Weight: 200gProduct features:1. LCD screen displays CO2 concentration, temperature and humidity at the same time2. NDIR detection element senses CO2 concentration3. Switchable display4. TWA (8-hour weighted average C02) STEL (15-minute weighted average CO2)5. Backlight allows users to operate in the dark6. Alarm value can be set7. Battery or transformer can be used as power supply, CO2 and humidity values ??can be easily calibrated8. Can be connected to a computer to download readings instantlyApplicable scenarios:1. Install a CO2 and temperature detector in the breeding house and connect it to the fan to monitor the above data at any time. When the CO2 concentration exceeds the standard, the monitor will alarm and start the fan to automatically replace fresh air, while monitoring the temperature and ventilation rate of the pen at any time2. Installing a CO2 detector in a plastic greenhouse can ensure timely alarm when the CO2 detector concentration is insufficient, so as to use gas fertilizer, ensure vegetables, fungi, flowers, Chinese medicine, etc. are put on the market early, high quality and high yield3. When school teachers are in class, if the window is not opened for a long time, the CO2 concentration will increase, reducing learning efficiency. If a CO2 monitor is placed in the classroom, the air quality can be guaranteed, thereby improving learning and work efficiency, preventing the spread of infectious diseases, and ensuring public health and safety4. Placing carbon dioxide and temperature monitors can monitor the carbon dioxide concentration and indoor temperature in these public places at any time, and adjust the ventilation rate and temperature as needed, which will save a lot of resources and expensesSpecification: Package Weight One Package Weight 0.65kgs / 1.44lb One Package Size 26cm * 18cm * 8cm / 10.24inch * 7.09inch * 3.15inch Qty per Carton 8 Carton Weight 6.30kgs / 13.89lb Carton Size 28cm * 38cm * 34cm / 11.02inch * 14.96inch * 13.39inch Loading Container 20GP: 737 cartons * 8 pcs = 5896 pcs 40HQ: 1711 cartons * 8 pcs = 13688 pcs

Read more less

1. Measurement object: car air conditioner2. Sensitivity (MAX): 6gr/yr3. Response time: instantaneous4. Detection method: continuous, unlimited5. Warm-up time: about 6 seconds6. Battery life: about 50 hours under normal use7. Probe length: 20cm8. Working temperature: 0~52 degrees Celsius9. Working humidity: 20% to 80%RH, no condensation10. Power supply: 4 No. 7 batteries (not included)11. Can detect all halogen refrigerants12. The knob switch can adjust the sensitivity at will13. Use high-quality corona sensor, sensitive response, longer life14. Low power consumption design, ultra-long battery life15. The maximum sensitivity is 6 grams/year, and the sensitivity can be adjusted in 7 levels. It can detect halogen gases such as CFCs/HCFCs/HFCs/SF-6 to meet the usage habits of different customers.16. Ready to use, fast preheating, quick response, sound/light dual alarm17. The freely bendable gooseneck probe can easily and quickly reach the location of the pipeline leak, and quickly and reliably locate the leak point of the refrigeration system18. Size: 22.9x6.5x6.5cmCan detect a variety of gases:1. It can react with all halogen gases (including chlorine and fluorine), but it is not limited to this. Other applicable gases are as follows:CFCs: R11, R12, R500, R503, etc.HCFCs: R22, R123, R124, R502, etc.HFCS: R410, R134a, R404a, R125, R407C, etc.2. Detection of ethylene oxide, ethanol gas, etc. used in medical equipment3. Detection of halon gas in fire extinguishing systems4. Detection of air conditioning, refrigeration systems and refrigerant recovery devices, etc.Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 24cm * 9cm * 7cm / 9.45inch * 3.54inch * 2.76inch Qty per Carton 60 Carton Weight 14.00kgs / 30.86lb Carton Size 51cm * 37cm * 43cm / 20.08inch * 14.57inch * 16.93inch Loading Container 20GP: 328 cartons * 60 pcs = 19680 pcs 40HQ: 762 cartons * 60 pcs = 45720 pcs

Read more less

1. Measurement object: car air conditioner2. Sensitivity (MAX): 6gr/yr3. Response time: instantaneous4. Detection method: continuous, unlimited5. Warm-up time: about 6 seconds6. Battery life: about 50 hours under normal use7. Probe length: 20cm8. Working temperature: 0~52 degrees Celsius9. Working humidity: 20% to 80%RH, no condensation10. Power supply: 4 No. 7 batteries (not included)11. Can detect all halogen refrigerants12. The knob switch can adjust the sensitivity at will13. Use high-quality corona sensor, sensitive response, longer life14. Low power consumption design, ultra-long battery life15. The maximum sensitivity is 6 grams/year, and the sensitivity can be adjusted in 7 levels. It can detect halogen gases such as CFCs/HCFCs/HFCs/SF-6 to meet the usage habits of different customers.16. Ready to use, fast preheating, quick response, sound/light dual alarm17. The freely bendable gooseneck probe can easily and quickly reach the location of the pipeline leak, and quickly and reliably locate the leak point of the refrigeration system18. Size: 22.9x6.5x6.5cmCan detect a variety of gases:1. It can react with all halogen gases (including chlorine and fluorine), but it is not limited to this. Other applicable gases are as follows:CFCs: R11, R12, R500, R503, etc.HCFCs: R22, R123, R124, R502, etc.HFCS: R410, R134a, R404a, R125, R407C, etc.2. Detection of ethylene oxide, ethanol gas, etc. used in medical equipment3. Detection of halon gas in fire extinguishing systems4. Detection of air conditioning, refrigeration systems and refrigerant recovery devices, etc.Specification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 24cm * 9cm * 7cm / 9.45inch * 3.54inch * 2.76inch Qty per Carton 60 Carton Weight 14.00kgs / 30.86lb Carton Size 51cm * 37cm * 43cm / 20.08inch * 14.57inch * 16.93inch Loading Container 20GP: 328 cartons * 60 pcs = 19680 pcs 40HQ: 762 cartons * 60 pcs = 45720 pcs

Read more less

1. Detection range: 0-1000ppm2. Working voltage: 5V3. Warm-up time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. 1.9-inch high-definition color screen, equipped with high-precision sensors, real-time monitoring of CO gas concentration is more accurate, and reading is more intuitive and convenient9. 0 seconds real-time detection, intelligent alarm, 2 seconds data refresh10. Built-in electrochemical carbon monoxide detection high-performance chip to ensure more accurate instrument detection11. Adopt high-digit electrochemical carbon monoxide sensor to accurately detect environmental data12. Adopt upgraded Ammorc algorithm, the power-on test only takes 35s for the numbers to stabilize, which can effectively reduce data fluctuations and monitor more stable and faster13. 3D porous air duct design improves air volume penetration rate, accurately calculates the content of tiny particles, close to the multi-faceted openings of the sensor, and real-time air circulation convection monitoring is more accurate14. It can not only detect the carbon monoxide concentration in the environment, but also detect the temperature and humidity in the indoor air. It can be used as a thermometer and hygrometer at ordinary times15. One-key brightness adjustment, intelligent power saving mode, and long-lasting battery life16. High-performance battery 603040, 700mAh large-capacity polymer lithium battery, safe and durable, and ultra-long battery life17. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid gas poisoning, explosions and other accidents18. Size: 85x50.6x17mmSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Display: LCD backlight2. Sensor: gas-sensitive semiconductor3. Detection range: 50~1000PPM (methane)4. Response sensitivity: 50PPM (methane)5. Response time: less than 500PPM about 5 seconds; greater than 500PPM about 2 seconds6. Measurable gases: ethanol, propanol, acetylene, ammonia, benzene, methane, ethane, propane, butane, 7. Butylene oxide, gasoline, hydrogen, naphtha natural gas, paint thinner, etc.8. Alarm mode: analog bar, red backlight and buzzer9. Power supply: 2x1.5VAAA batteries (not included)10. 1.1-inch high-definition large screen, the detected gas is clear at a glance11. Simple three-button, easy to use12. Anti-lost lanyard fit design, carry with you13. The back cover can be disassembled and installed on the battery compartment for easy battery replacement14. The high-definition large screen is equipped with high-precision sensors, analog bar, red backlight and buzzer triple alarm mode, accurate and reliable15. High-strength ABS material body, tough and wear-resistant, durable16. High and low sensitivity, accurate detection of pipeline leakage points17. Suitable for occasions with flammable gas, fog and residue, to detect flammable gas and find the source of leakage18. Size: 134.5x32.5x16mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 20cm * 8cm * 3cm / 7.87inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 6.60kgs / 14.55lb Carton Size 36cm * 36cm * 35cm / 14.17inch * 14.17inch * 13.78inch Loading Container 20GP: 587 cartons * 100 pcs = 58700 pcs 40HQ: 1364 cartons * 100 pcs = 136400 pcs

Read more less

1. Detection range: 0-1000ppm2. Working voltage: 5V3. Warm-up time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. 1.9-inch high-definition color screen, equipped with high-precision sensors, real-time monitoring of CO gas concentration is more accurate, and reading is more intuitive and convenient9. 0 seconds real-time detection, intelligent alarm, 2 seconds data refresh10. Built-in electrochemical carbon monoxide detection high-performance chip to ensure more accurate instrument detection11. Adopt high-digit electrochemical carbon monoxide sensor to accurately detect environmental data12. Adopt upgraded Ammorc algorithm, the power-on test only takes 35s for the numbers to stabilize, which can effectively reduce data fluctuations and monitor more stable and faster13. 3D porous air duct design improves air volume penetration rate, accurately calculates the content of tiny particles, close to the multi-faceted openings of the sensor, and real-time air circulation convection monitoring is more accurate14. It can not only detect the carbon monoxide concentration in the environment, but also detect the temperature and humidity in the indoor air. It can be used as a thermometer and hygrometer at ordinary times15. One-key brightness adjustment, intelligent power saving mode, and long-lasting battery life16. High-performance battery 603040, 700mAh large-capacity polymer lithium battery, safe and durable, and ultra-long battery life17. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid gas poisoning, explosions and other accidents18. Size: 85x50.6x17mmSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Detection range: 0-1000ug/m32. Working voltage: 3.7V3. Preheating time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. Ultra-high-definition color screen, equipped with high-precision sensors, real-time monitoring of PM1.0, PM2.5, PM10 is more accurate, and reading is more intuitive and convenient9. 0 seconds real-time detection, intelligent alarm, when the value reaches 36ug/m3, a beeping sound cycle alarm will start, once every 10 minutes10. Built-in air quality detection high-performance chip to ensure more accurate instrument detection11. Adopt high-bit point sensor core to accurately detect environmental data12. Adopt upgraded Ammorc algorithm, the power-on test only takes 1-2min for the numbers to stabilize, which can effectively reduce data fluctuations and monitor more stable and faster13. Quickly detect whether PM1.0, PM2.5, and PM10 exceed the standard14. High-precision sensors accurately identify and capture different pollutants in the gas, special patents, reduce interference and compensate for each other, and ensure the accuracy of various indicators15. 3D multi-hole air duct design, improve air volume penetration rate, accurately calculate the content of tiny particles16. Close to the multi-faceted openings of the sensor, real-time air circulation convection monitoring is more accurate17. Not only can it test PM1.0, PM2.5, and PM10 in new house decoration, but it can also test the temperature and humidity in the room air. It can be used as a thermometer and hygrometer at ordinary times18. High-performance battery 703040, 1000mAh large-capacity polymer lithium battery, safe and durable, with ultra-long battery life19. Widely used in various indoor and outdoor places, indoor furniture, inferior furniture, catering, car, home, can effectively avoid PM harm to the body and other accidents20. Size: 85x51x17mm21. Weight: 58gSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Detection range: 0-1000ug/m32. Working voltage: 3.7V3. Preheating time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. Ultra-high-definition color screen, equipped with high-precision sensors, real-time monitoring of PM1.0, PM2.5, PM10 is more accurate, and reading is more intuitive and convenient9. 0 seconds real-time detection, intelligent alarm, when the value reaches 36ug/m3, a beeping sound cycle alarm will start, once every 10 minutes10. Built-in air quality detection high-performance chip to ensure more accurate instrument detection11. Adopt high-bit point sensor core to accurately detect environmental data12. Adopt upgraded Ammorc algorithm, the power-on test only takes 1-2min for the numbers to stabilize, which can effectively reduce data fluctuations and monitor more stable and faster13. Quickly detect whether PM1.0, PM2.5, and PM10 exceed the standard14. High-precision sensors accurately identify and capture different pollutants in the gas, special patents, reduce interference and compensate for each other, and ensure the accuracy of various indicators15. 3D multi-hole air duct design, improve air volume penetration rate, accurately calculate the content of tiny particles16. Close to the multi-faceted openings of the sensor, real-time air circulation convection monitoring is more accurate17. Not only can it test PM1.0, PM2.5, and PM10 in new house decoration, but it can also test the temperature and humidity in the room air. It can be used as a thermometer and hygrometer at ordinary times18. High-performance battery 703040, 1000mAh large-capacity polymer lithium battery, safe and durable, with ultra-long battery life19. Widely used in various indoor and outdoor places, indoor furniture, inferior furniture, catering, car, home, can effectively avoid PM harm to the body and other accidents20. Size: 85x51x17mm21. Weight: 58gSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 11.80kgs / 26.01lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Detection range: 0-999ppm2. Working voltage: 5V3. Preheating time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. Adopt high-digit electrochemical carbon monoxide sensor to accurately detect environmental data9. Built-in electrochemical carbon monoxide detection high-performance chip to ensure more accurate instrument detection10. 3D multi-porous air duct design to improve air volume penetration rate and accurately calculate the content of tiny particles11. Multi-faceted openings, real-time air circulation convection monitoring is more accurate12. Temperature and humidity sensor, which can sensitively detect temperature and humidity changes and use automatic compensation technology to reduce the impact on CO detection results, making the detection results more accurate13. G key one-key brightness adjustment, daytime brightness adjustment, intelligent power saving mode14. High-performance large battery, 1000mAh large-capacity polymer lithium battery, safe and durable, ultra-long battery life15. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid accidents such as gas poisoning and explosions16. Size: 90x51x17mm17. Weight: 80gSpecification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 13.80kgs / 30.42lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Detection range: 0-999ppm2. Working voltage: 5V3. Preheating time: 35s4. Data refresh frequency: 2s5. Working humidity: 0~95%RH6. Working temperature: -20-60 degrees Celsius7. Charging method: Type-c interface8. Adopt high-digit electrochemical carbon monoxide sensor to accurately detect environmental data9. Built-in electrochemical carbon monoxide detection high-performance chip to ensure more accurate instrument detection10. 3D multi-porous air duct design to improve air volume penetration rate and accurately calculate the content of tiny particles11. Multi-faceted openings, real-time air circulation convection monitoring is more accurate12. Temperature and humidity sensor, which can sensitively detect temperature and humidity changes and use automatic compensation technology to reduce the impact on CO detection results, making the detection results more accurate13. G key one-key brightness adjustment, daytime brightness adjustment, intelligent power saving mode14. High-performance large battery, 1000mAh large-capacity polymer lithium battery, safe and durable, ultra-long battery life15. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid accidents such as gas poisoning and explosions16. Size: 90x51x17mm17. Weight: 80gSpecification: Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 19cm * 8cm * 5cm / 7.48inch * 3.15inch * 1.97inch Qty per Carton 100 Carton Weight 13.80kgs / 30.42lb Carton Size 39cm * 36cm * 38cm / 15.35inch * 14.17inch * 14.96inch Loading Container 20GP: 499 cartons * 100 pcs = 49900 pcs 40HQ: 1160 cartons * 100 pcs = 116000 pcs

Read more less

1. Display: LCD backlight2. Sensor: gas-sensitive semiconductor3. Detection range: 50~1000PPM (methane)4. Response sensitivity: 50PPM (methane)5. Response time: less than 500PPM about 5 seconds; greater than 500PPM about 2 seconds6. Measurable gases: ethanol, propanol, acetylene, ammonia, benzene, methane, ethane, propane, butane, 7. Butylene oxide, gasoline, hydrogen, naphtha natural gas, paint thinner, etc.8. Alarm mode: analog bar, red backlight and buzzer9. Power supply: 2x1.5VAAA batteries (not included)10. 1.1-inch high-definition large screen, the detected gas is clear at a glance11. Simple three-button, easy to use12. Anti-lost lanyard fit design, carry with you13. The back cover can be disassembled and installed on the battery compartment for easy battery replacement14. The high-definition large screen is equipped with high-precision sensors, analog bar, red backlight and buzzer triple alarm mode, accurate and reliable15. High-strength ABS material body, tough and wear-resistant, durable16. High and low sensitivity, accurate detection of pipeline leakage points17. Suitable for occasions with flammable gas, fog and residue, to detect flammable gas and find the source of leakage18. Size: 134.5x32.5x16mmSpecification: Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 20cm * 8cm * 3cm / 7.87inch * 3.15inch * 1.18inch Qty per Carton 100 Carton Weight 6.60kgs / 14.55lb Carton Size 36cm * 36cm * 35cm / 14.17inch * 14.17inch * 13.78inch Loading Container 20GP: 587 cartons * 100 pcs = 58700 pcs 40HQ: 1364 cartons * 100 pcs = 136400 pcs

Read more less

1. Detection technology: electrochemical sensor2. Detection range: 0-999ppm3. Working humidity: 0-95%4. Working temperature: -10-50 degrees Celsius5. Data refresh rate: 2S6. Display mode: ultra-high-definition color screen7. Battery capacity: 1000mAh, with power indicator8. Battery model: 8030409. Charging interface: TYPE-C 3.7V10. When the value reaches 50ppm, a beeping sound cycle alarm is triggered every 3 minutes11. 2.1-inch high-definition color screen, equipped with high-precision sensors, real-time monitoring of CO gas concentration is more accurate, and reading is more intuitive and convenient12. Real-time monitoring of CO content in the environment. When the CO concentration is too high, an audible and visual alarm will be issued to prevent danger13. Built-in electrochemical CO detection high-performance chip to ensure more accurate instrument detection14. IP65-level waterproof for daily use, multiple protection design, hard-core protection, no fear of rain invasion, outdoor travel, real-time monitoring of CO environmental concentration, and prevention of danger15. 3D multi-hole air duct design, improves air volume penetration rate, accurately calculates the content of tiny particles, multi-faceted openings, and more accurate air circulation convection monitoring16. Temperature and humidity sensor, which can sensitively detect temperature and humidity changes and use automatic compensation technology to reduce the impact on CO detection results, making the detection results more accurate17. High-precision sensors accurately identify and capture different pollutants in the gas, special patents, reduce interference and compensate for each other at the same time, to ensure the accuracy of various indicators18. High-performance large battery, 1000mAh large-capacity polymer lithium battery, safe and durable, ultra-long battery life19. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid accidents such as gas poisoning and explosions20. Product size: 63x63x20mm21. Weight: 58gSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 9cm * 4cm / 6.3inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 12.50kgs / 27.56lb Carton Size 43cm * 33cm * 31cm / 16.93inch * 12.99inch * 12.2inch Loading Container 20GP: 606 cartons * 100 pcs = 60600 pcs 40HQ: 1407 cartons * 100 pcs = 140700 pcs

Read more less

1. Detection technology: electrochemical sensor2. Detection range: 0-999ppm3. Working humidity: 0-95%4. Working temperature: -10-50 degrees Celsius5. Data refresh rate: 2S6. Display mode: ultra-high-definition color screen7. Battery capacity: 1000mAh, with power indicator8. Battery model: 8030409. Charging interface: TYPE-C 3.7V10. When the value reaches 50ppm, a beeping sound cycle alarm is triggered every 3 minutes11. 2.1-inch high-definition color screen, equipped with high-precision sensors, real-time monitoring of CO gas concentration is more accurate, and reading is more intuitive and convenient12. Real-time monitoring of CO content in the environment. When the CO concentration is too high, an audible and visual alarm will be issued to prevent danger13. Built-in electrochemical CO detection high-performance chip to ensure more accurate instrument detection14. IP65-level waterproof for daily use, multiple protection design, hard-core protection, no fear of rain invasion, outdoor travel, real-time monitoring of CO environmental concentration, and prevention of danger15. 3D multi-hole air duct design, improves air volume penetration rate, accurately calculates the content of tiny particles, multi-faceted openings, and more accurate air circulation convection monitoring16. Temperature and humidity sensor, which can sensitively detect temperature and humidity changes and use automatic compensation technology to reduce the impact on CO detection results, making the detection results more accurate17. High-precision sensors accurately identify and capture different pollutants in the gas, special patents, reduce interference and compensate for each other at the same time, to ensure the accuracy of various indicators18. High-performance large battery, 1000mAh large-capacity polymer lithium battery, safe and durable, ultra-long battery life19. Widely used in various indoor and outdoor places, indoors, kitchens, restaurants, cars, homes..., can effectively avoid accidents such as gas poisoning and explosions20. Product size: 63x63x20mm21. Weight: 58gSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 16cm * 9cm * 4cm / 6.3inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 12.50kgs / 27.56lb Carton Size 43cm * 33cm * 31cm / 16.93inch * 12.99inch * 12.2inch Loading Container 20GP: 606 cartons * 100 pcs = 60600 pcs 40HQ: 1407 cartons * 100 pcs = 140700 pcs

Read more less

1. Multiple detection modes including 1/2" stud scan for wood or metal studs up to 13mm deep, 1" stud scan up to 25mm deep, 1 1/2" stud scan up to 38mm deep. It also features a metal mode for detecting metal up to 80mm or 60mm deep and an AC mode for detecting live unshielded AC wires up to 51mm deep.2. Usage: Quickly locate wood, metal, and AC wires hidden in walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, and more. Saves you from danger when installing TVs, cabinets, garage racks, and more.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 17.7 x 7 x 3cm9. Weight: 150gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 22cm * 10cm * 6cm / 8.66inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

1. With five scanning modes:--Stud ?" Scan: Locates the center and edge of wood and metal studs up to ?" (13mm) deep--Stud 1" Scan: Locates the center and edge of wood and metal studs up to 1" (25mm) deep--Stud 1?" Scan: Locates the center and edge of wood and metal studs up to 1?" (38mm) deep--Metal Scan: Detects metal up to 3.2" (80mm) deep--AC Scan: Detects live unshielded AC wires up to 2" (51mm) deep2. Usage: Quickly locate wood, metal, and AC wires hidden in the walls, floors, and ceilings of your home. It works on lath, wallpaper, wood floors, soundproof ceilings, painted walls, etc. Save you from danger when installing TVs, cabinets, garage racks, etc.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 145 x 60 x 30mm9. Weight: 130gSpecification: Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 20cm * 10cm * 6cm / 7.87inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 17.50kgs / 38.58lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

1. With five scanning modes:--Stud ?" Scan: Locates the center and edge of wood and metal studs up to ?" (13mm) deep--Stud 1" Scan: Locates the center and edge of wood and metal studs up to 1" (25mm) deep--Stud 1?" Scan: Locates the center and edge of wood and metal studs up to 1?" (38mm) deep--Metal Scan: Detects metal up to 2.36" (60mm) deep--AC Scan: Detects live unshielded AC wires up to 2" (51mm) deep2. Usage: Quickly locate wood, metal, and AC wires hidden in the walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, etc. Save you from danger when installing TVs, cabinets, garage racks, etc.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 152 x 62 x 28mm9. Weight: 168gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 18cm * 10cm * 7cm / 7.09inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

1. With five scanning modes:--Stud ?" Scan: Locates the center and edge of wood and metal studs up to ?" (13mm) deep--Stud 1" Scan: Locates the center and edge of wood and metal studs up to 1" (25mm) deep--Stud 1?" Scan: Locates the center and edge of wood and metal studs up to 1?" (38mm) deep--Metal Scan: Detects metal up to 2.36" (60mm) deep--AC Scan: Detects live unshielded AC wires up to 2" (51mm) deep2. Usage: Quickly locate wood, metal, and AC wires hidden in the walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, etc. Save you from danger when installing TVs, cabinets, garage racks, etc.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 152 x 62 x 28mm9. Weight: 168gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 18cm * 10cm * 7cm / 7.09inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

1. Multiple detection modes including 1/2" stud scan for wood or metal studs up to 13mm deep, 1" stud scan up to 25mm deep, 1 1/2" stud scan up to 38mm deep. It also features a metal mode for detecting metal up to 80mm or 60mm deep and an AC mode for detecting live unshielded AC wires up to 51mm deep.2. Usage: Quickly locate wood, metal, and AC wires hidden in walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, and more. Saves you from danger when installing TVs, cabinets, garage racks, and more.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 17.7 x 7 x 3cm9. Weight: 150gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 22cm * 10cm * 6cm / 8.66inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

Features1. PM9913 intelligent electric parameter measuring instrument is a multi-function measuring instrument integrating voltage test, current test, power test, power factor test and frequency test. 2. In addition to basic electric parameter measurement function, PM9913 intelligent electric parameter tester increases crest value voltage and crest value Current, active power, reactive power test. 3. It has the functions of current and power upper and lower limit setting, discrimination and alarm to avoid the problems of fatigue, misjudgment and inefficiency caused by traditional manual discrimination. Ideal for line measurement. 4. Six windows display: Voltage V, current A, active power, power factor PF, frequency Hz, peak-voltage MAX V/peak-current MAX I/apparent power VA/reactive power Var 5. Voltage: 3V~600V; Current:0.3mA~2A 6. Minimum 0.01W (suitable for standby power consumption measurement); +/-(0.4% reading + 0.1% range + 1 word) 7. Upper and lower limit judgment function: With current, power, power factor upper and lower limit setting, judgment and alarm function (delayed alarm) 8. Latch function: used when data fluctuates, convenient for reading 9. AC: 45Hz~65Hz/400 Hz Bandwidth: 5KHzPackage List1. Host x 1 2. Power cord x 1 3. Product manual (electronic file) x 1 4. Product certificate x 1 5. Product warranty card x 1Specification: Package Weight One Package Weight 3.00kgs / 6.62lb One Package Size 47cm * 32cm * 19cm / 18.5inch * 12.6inch * 7.48inch Qty per Carton 4 Carton Weight 13.00kgs / 28.66lb Carton Size 62cm * 47cm * 36cm / 24.41inch * 18.5inch * 14.17inch Loading Container 20GP: 254 cartons * 4 pcs = 1016 pcs 40HQ: 590 cartons * 4 pcs = 2360 pcs

Read more less

1. With five scanning modes:--Stud ?" Scan: Locates the center and edge of wood and metal studs up to ?" (13mm) deep--Stud 1" Scan: Locates the center and edge of wood and metal studs up to 1" (25mm) deep--Stud 1?" Scan: Locates the center and edge of wood and metal studs up to 1?" (38mm) deep--Metal Scan: Detects metal up to 2.36" (60mm) deep--AC Scan: Detects live unshielded AC wires up to 2" (51mm) deep2. Usage: Quickly locate wood, metal, and AC wires hidden in the walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, etc. Save you from danger when installing TVs, cabinets, garage racks, etc.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 152 x 62 x 28mm9. Weight: 168gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 18cm * 10cm * 7cm / 7.09inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

1. Multiple detection modes including 1/2" stud scan for wood or metal studs up to 13mm deep, 1" stud scan up to 25mm deep, 1 1/2" stud scan up to 38mm deep. It also features a metal mode for detecting metal up to 80mm or 60mm deep and an AC mode for detecting live unshielded AC wires up to 51mm deep.2. Usage: Quickly locate wood, metal, and AC wires hidden in walls, floors, and ceilings of your home. It works on laths, wallpaper, wood floors, soundproof ceilings, painted walls, and more. Saves you from danger when installing TVs, cabinets, garage racks, and more.3. High-definition backlit display, easy to display data in a dark environment4. The product is small, easy to carry and easy to use5. Accurate positioning, fast search, improved work efficiency, in-depth exploration of safety and stability6. Screen: green backlit screen7. Power supply: 9V 6F22 battery (not included)8. Product size: 17.7 x 7 x 3cm9. Weight: 150gSpecification: Package Weight One Package Weight 0.20kgs / 0.44lb One Package Size 22cm * 10cm * 6cm / 8.66inch * 3.94inch * 2.36inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 60cm * 38cm * 41cm / 23.62inch * 14.96inch * 16.14inch Loading Container 20GP: 285 cartons * 100 pcs = 28500 pcs 40HQ: 662 cartons * 100 pcs = 66200 pcs

Read more less

Features1. PM9912 intelligent electric parameter measuring instrument is a multi-function measuring instrument integrating voltage test, current test, power test, power factor test and frequency test. 2. In addition to basic electric parameter measurement function, PM9912 intelligent electric parameter tester increases crest value voltage and crest value current, active power, reactive power test. 3. It has the functions of current and power upper and lower limit setting, discrimination and alarm to avoid the problems of fatigue, misjudgment and inefficiency caused by traditional manual discrimination. Ideal for line measurement. 4. Six windows display: Voltage V, current A, active power, peak-voltage MAXV, peak-current MAX I, power factor PF/frequency Hz/apparent power VA/reactive power Var 5. Voltage: 3V~600V; Current: 5mA~20A; +/-(0.4% reading + 0.1% range + 1 word) 6. Upper and lower limit judgment function: With current, power, power factor upper and lower limit setting, judgment and alarm function (delayed alarm) 7. Latch function: used when data fluctuates, convenient for reading 8. AC: 45Hz~65Hz/400 Hz Bandwidth: 5KHzPackage List1. Host x 1 2. Power cord x 1 3. Product manual (electronic file) x 1 4. Product certificate x 1 5. Product warranty card x 1Specification: Package Weight One Package Weight 3.00kgs / 6.62lb One Package Size 47cm * 32cm * 19cm / 18.5inch * 12.6inch * 7.48inch Qty per Carton 4 Carton Weight 13.00kgs / 28.66lb Carton Size 62cm * 47cm * 36cm / 24.41inch * 18.5inch * 14.17inch Loading Container 20GP: 254 cartons * 4 pcs = 1016 pcs 40HQ: 590 cartons * 4 pcs = 2360 pcs

Read more less

Features1. PM9911 intelligent electric parameter measuring instrument is a multi-function measuring instrument integrating voltage test, current test, power test, power factor test and frequency test. 2. In addition to basic electric parameter measurement function, PM9911 intelligent electric parameter tester increases crest value voltage and crest value Current, active power, reactive power test. 3. It has the functions of current and power upper and lower limit setting, discrimination and alarm to avoid the problems of fatigue, misjudgment and inefficiency caused by traditional manual discrimination. Ideal for line measurement. 4. Six windows display: Voltage V, current A, active power, power factor PF, frequency Hz, peak-voltage MAX V/peak-current MAX I/apparent power VA/reactive power Var 5. Voltage: 3V~600V; Current: 5mA~20A; +/-(0.4% reading + 0.1% range + 1 word) 6. Upper and lower limit judgment function: With current, power, power factor upper and lower limit setting, judgment and alarm function (delayed alarm) 7. Latch function: Used when data fluctuates, convenient for reading 8. AC: 45Hz~65Hz/400 Hz Bandwidth: 5KHzPackage List1. Host x 1 2. Power cord x 1 3. Product manual (electronic file) x 1 4. Product certificate x 1 5. Product warranty card x 1Specification: Package Weight One Package Weight 3.00kgs / 6.62lb One Package Size 47cm * 32cm * 19cm / 18.5inch * 12.6inch * 7.48inch Qty per Carton 4 Carton Weight 13.00kgs / 28.66lb Carton Size 62cm * 47cm * 36cm / 24.41inch * 18.5inch * 14.17inch Loading Container 20GP: 254 cartons * 4 pcs = 1016 pcs 40HQ: 590 cartons * 4 pcs = 2360 pcs

Read more less

1. Material: plastic + alloy probe2. Working power supply: 9V battery x 1 (not included)3. The thermal conductivity meter is an electronic instrument designed and manufactured based on the thermal conductivity of diamonds. It is specially used to identify the authenticity of diamonds. It is also suitable for detecting/identifying the hardness of genuine gemstones such as jade, jade, crystal, etc.4. The metal tip of the probe is electrically heated and a buzzing sound is made when it touches the surface of the diamond5. Whether it is to identify the authenticity of diamonds or test the hardness of jade, it should be noted that the probe of the thermal conductivity meter should be at a 90-degree right angle to the object being tested6. When testing, adjust the three-color indicator light to the 4th grid, then press the triangular iron sheet at the back with your hand, and align the probe vertically with the test object. If it is a diamond, the light jumps to the 8th grid or above, that is, the red light area, and a dripping sound is made; if it is to test jade, the light will light up the 6th or 7th grid, indicating that the hardness of the jade has reached, and there will be no sound7. The operating environment is 5-35 degrees Celsius, and the tested product must be clean, dry and at room temperature8. Dimensions: 41x155x21 mm9. Net weight: 57 gramsSpecification: Package Weight One Package Weight 0.12kgs / 0.27lb One Package Size 20cm * 7cm * 5cm / 7.87inch * 2.76inch * 1.97inch Qty per Carton 60 Carton Weight 8.30kgs / 18.30lb Carton Size 42cm * 37cm * 32cm / 16.54inch * 14.57inch * 12.6inch Loading Container 20GP: 536 cartons * 60 pcs = 32160 pcs 40HQ: 1244 cartons * 60 pcs = 74640 pcs

Read more less

1. Locating and detecting underground cables2. Locating and detecting cables in walls and pipes3. Can find 500 meters of wires and cables 0.5 meters deep4. Use 9V battery, one battery for transmitter and one battery for receiver (not included)5. Cables that can be found include: twisted pair, video cable, telephone cable, ordinary metal wire6. Used to locate wires before drilling7. Detection range 3 feet, cable length 3000 feet8. Widely used in pet fencesSpecification: Package Weight One Package Weight 0.44kgs / 0.98lb One Package Size 25cm * 16cm * 6cm / 9.84inch * 6.3inch * 2.36inch Qty per Carton 5 Carton Weight 3.30kgs / 7.28lb Carton Size 27cm * 28cm * 32cm / 10.63inch * 11.02inch * 12.6inch Loading Container 20GP: 1102 cartons * 5 pcs = 5510 pcs 40HQ: 2558 cartons * 5 pcs = 12790 pcs

Read more less