Repair & Spare Parts

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame (TFT Material) for OnePlus 5T A5010 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. SIM card tray + Micro SD card tray for Lenovo Tab M10 Plus TB-X606F TB-X606X. 2. Replace your broken or unworkable one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Back cover replacement for Xiaomi 11T/11T Pro 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Suitable for Meta Quest 2 VR headset2. Good test performance3. Replace broken, worn or damaged parts.4. It will make your controller work properly again.5. Material: plastic + metalSpecification: General Compatible with Meta:  Quest 2 Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 22cm * 8cm * 3cm / 8.66inch * 3.15inch * 1.18inch Qty per Carton 80 Carton Weight 9.10kgs / 20.06lb Carton Size 46cm * 34cm * 32cm / 18.11inch * 13.39inch * 12.6inch Loading Container 20GP: 532 cartons * 80 pcs = 42560 pcs 40HQ: 1236 cartons * 80 pcs = 98880 pcs

Read more less

1. B-7000 is a new type transparent environ mental protection adhesive, Especially suit able for Glass, Plastic,Acrylic rhinestones,PE , PP, PVC,ABS,nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber, paper type and other materials.2. Using a needle design, can be opened after use.3. Impact resistance: Very high elasticity. effectively bonding with the expansion of the material with the surface, improve the durability of the load bearing structure.4. Sealing characteristics: sealed and isolated gas, liquid, air flow, in the underwater environment with plastic long-term to maintain excellent bonding strength.5. Surface dry time:about 6 minutes.

Read more less

1. Non-destructive installation, simple and fast2. One-piece injection molding, the structure is firm, stable and durable3. Suitable for DJI Mavic Mini 2 / SE4. The real machine opens the mold, and the fit is stable5. Material: plastic6. Weight: 20g

Read more less

1. Power button and volume control button replacement for Samsung Galaxy Note10+ 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Fitbit Charge 5 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Replacement back camera lens for Asus Zenfone 8 ZS590KS. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Charging port board replacement for Alcatel 3X 2019 5048 5048U 5048Y. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (touch screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement touch Panel for Lenovo Tab M10 HD TB-X505 X505F TB-X505L X505. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Fingerprint sensor flex cable for Xiaomi Mi 11 Lite/11 Lite 5G NE M2101K9G. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Microphone board replacement for Huawei P30 Pro. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Small size, light weight and easy to carry 2. Good quality and long service life 3. Easy to use 4. Length: about 17.5cm 5. Weight: about 10g

Read more less

1. Replacement back camera lens replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Replacement power DC jack USB-C connector for MacBook Air 13 inch A2179 A2337 2020. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.

Read more less

Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A14 5G SM-A146P US Edition 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Suitable for PS5 Controller V2 version2. Replace damaged or unusable accessories with new ones3. Every item has been inspected and in good condition before shipment4. Professional installation is strongly recommended! We are not responsible for any damage to your device that you may incur during the replacement parts replacement process!5. Perfectly fit for gaming consoles and work properly

Read more less

Before Installation Notes1. Tips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.2. Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.3. Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD display + touch screen digitizer assembly for Samsung Galaxy A13 4G SM-A135F. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

1. Charging port board replacement for Samsung Galaxy Tab A 10.5 / SM-T590 / SM-T5954. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Replacement back camera lens for Asus ROG Phone 3 ZS661KS / ZS661KL. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. Replacement touch bar for Macbook Pro 13.3 A2159 (2019). 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping.

Read more less

1. Back cover replacement for OnePlus 10 Pro 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Charging port board replacement for Nokia 7 Plus. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

Read more less

1. Back cover replacement for Xiaomi Redmi Note 11 Pro 5G 21091116I 2201116SG 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Power button and volume control button replacement for Xiaomi Redmi Note 7 Pro / Redmi Note 7 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. Replacement lens for GoPro Max 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the lens is installedSpecification: General Compatible with Gopro:  MAX Package Weight One Package Weight 0.03kgs / 0.06lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 12.00kgs / 26.46lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

Read more less

1. Camera lens cover replacement part. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.Specification: General Compatible with Insta360:  X3 Package Weight One Package Weight 0.02kgs / 0.04lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 1000 Carton Weight 9.00kgs / 19.84lb Carton Size 32cm * 30cm * 32cm / 12.6inch * 11.81inch * 12.6inch Loading Container 20GP: 868 cartons * 1000 pcs = 868000 pcs 40HQ: 2015 cartons * 1000 pcs = 2015000 pcs

Read more less

1. Li-ion Charging Box battery for Apple AirPods Pro A2084 A2083 A2190 CP1154 2. Best replacement for the original battery with comparable standby and talk time 3. The Li-ion battery provides excellent continuous power sources to your device 4. Use the authorized charger only 5. If you do not use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months 6. Compared with Nickel-Cadmium battery, the Li-ion battery has no memory effect 7. Integrated microchip inside prevents overcharging and lengthens battery life 8. To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or waterSpecification: General Compatible with Apple:  AirPods Pro Package Weight One Package Weight 0.02kgs / 0.05lb One Package Size 10cm * 5cm * 1cm / 3.94inch * 1.97inch * 0.39inch Qty per Carton 600 Carton Weight 13.00kgs / 28.66lb Carton Size 42cm * 27cm * 32cm / 16.54inch * 10.63inch * 12.6inch Loading Container 20GP: 734 cartons * 600 pcs = 440400 pcs 40HQ: 1705 cartons * 600 pcs = 1023000 pcs

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Fingerprint sensor flex cable replacement part.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less

1. T-7000 is a new type transparent environmental protection adhesive, Especially suitable for Glass, Plastic, Acrylic rhinestones, PE, PP, PVC, ABS, nylon, sponge, film, textiles, electronic components, plastics, rubber, fiber, paper type and other materials.2. Using a needle design, can be opened after use.3. Impact resistance: Very high elasticity. effectively bonding with the expansion of the material with the surface, improving the durability of the load-bearing structure.4. Sealing characteristics: sealed and isolated gas, liquid, air flow, in the underwater environment with plastic long-term to maintain excellent bonding strength.5. Surface dry time: about 3 minutes.

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD + touch screen digitizer assembly replacement part2. Replace your broken or unusable item with a new one3. Make your device look more refreshing than ever4. Completely fit and work5. Each item has been checked and in good condition before shipping6. Professional installation is highly recommended. We will not be responsible once the screen is installed7. Note: No Fingerprint Identification

Read more less

1. Non-destructive installation, simple and fast2. One-piece injection molding, the structure is firm, stable and durable3. Suitable for DJI Mavic Mini 2 / SE4. The real machine opens the mold, and the fit is stable5. Material: plastic6. Weight: 20g

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Samsung Galaxy S10 SM-G973 2. Replace the old, broken, cracked, damaged one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: No Fingerprint IdentificationBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. LCD flex cable ribbon replacement for Samsung Galaxy Tab A8 10.5(2021) SM-X200/X205 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

About the product1. Replacement touch Panel for Samsung Galaxy Tab A 10.1 (2019) SM-T510/T515. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (touch screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

1. Power button flex cable replacement.2. Replace your broken or unworkable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts.

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. If you dont use the battery for a long time, please put it in a dry and cool place and make it full charged once every three months.2. Replace your broken or unusable item with a new one.3. Each item has been checked and in good condition before shipping.4. Completely fit and work.5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.6. Warning:- To reduce risk of fire or bums, do not disassemble, crush, short circuit, or dispose of it in fire or water

Read more less

1. Only suitable for DJI Mavic mini drone. 2. Replace your broken or unworkable bottom shell cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. LCD flex cable ribbon replacement for iPad Pro 11 inch (2018) / A1980 / A2013 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Read more less

1. High quality Speakers for Macbook Pro 15.4 inch A1398 (2012 - 2015) / MC975 / MC976 / ME664 / ME665 2. Replace your broken or unworkable part with a new one 3. Each item has been checked and in good condition before shipping 4. Highly recommend professional installation. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts

Read more less

1. Front camera for OnePlus 7 Pro. 2. Replace your broken or unworkable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

Read more less