Test Equipment

2013 products


  • TBD0525620.jpg@3e881db0c90e720abf6de16bfe855f83

    10 PCS 80 Strips PH Test Paper Indicator Litmus Paper Water Pollution Kit

    1. Product name: PH test paper2. Packing method: Sealed with plastic film, each pack / 80 sheets with standard color card3. Effective range: 1-144. Method of use: drop or smear the liquid to be tested on the PH test paper, it can be reflected and displayed almost without waiting, and then compared with the attached standard color chart to get the PH value.5. How to use pH test paper 1-146. Step 1: Open the strip-shaped piece of paper exposed by the test bag, the paper sheet is pH test paper, and there are 1-14 color cards on the surface of the box.7. Step 2: Remove the test strip and place it flat on a dry glass or plastic sheet (Note: the glass or plastic sheet must be dry and clean);8. Step 3: Use a glass rod or pipette to take the test solution and drop it on one end of the test paper;9. Step 4: After one second, the solution part of the test paper and the test paper produce a color change. At this time, compare with the standard color card and read the pH value. In the test, the lower the pH value, the stronger the acidity of the solution. When the pH value is 7, the solution is neutral, the greater the pH value, the stronger the solutions alkalinity;10. Cosmetic test: Because the pH of the skin is about 6, it is a weak acid, so the pH of the cosmetic is about 6 so that it does not damage the skin pH balance, so the pH value is close to 6 without harming the skin. 6, ph is very good between 5 and 7), Cosmetics are applied on the test strip, and then the closest color is found by comparing the color chart, and the pH is obtained.11. Test for amniotic fluid: The urine and vaginal discharge of most people are acidic, while the amniotic fluid is alkaline. (Take a vaginal secretion with a sterile cotton swab, apply it on a test paper, and compare the color chart to find the closest color, pH 7 The above indicates amniotic fluid; if it does not change color, it means that it is not amniotic fluid.)12. Measure the pH of the human body, the saliva sticks to the test paper, compare the color card, find the closest color, and get the pH of the human body13. Test urine pH: Urine stained on the test paper, urine stained on the test paper, compare the color card, find the closest color, and get the pH of the human body14. Check the acidity and alkalinity of the gas: first wet the test paper with distilled water, stick it to one end of the glass rod, and then send it to the mouth of the container containing the gas to be measured, observe the color change and judge the nature of the gas. (The test paper cannot touch the wall of the device)15. Used for pH testing of soils; Some plants require acidic or weakly acidic soils. It is necessary to measure the acidity of new soils or substrates that have been used for a long time!16. Measurement method of soil pH (PH value): When measuring the pH value of the substrate, you can sample a little soil, put it in the bottom of the bowl, then add 4-6 drops of distilled water, and stir well. After it is still and clarified, immerse a part of the PH test paper in the clear solution, and then the test paper will change color. The pH value can be directly obtained by comparing the discolored test paper with the PH standard color chart.Specification: Package Weight One Package Weight 0.09kgs / 0.21lb One Package Size 10cm * 8cm * 2cm / 3.94inch * 3.15inch * 0.79inch Qty per Carton 100 Carton Weight 10.00kgs / 22.05lb Carton Size 42cm * 42cm * 22cm / 16.54inch * 16.54inch * 8.66inch Loading Container 20GP: 687 cartons * 100 pcs = 68700 pcs 40HQ: 1595 cartons * 100 pcs = 159500 pcs

    2.727 Ft

  • DT0002R.jpg@8f7523f216aa2631054f7a10ca965744

    V40D 2 Wires Red Light Display Mini Waterproof IPX4 Digital Voltage Meter, Measure Voltage: DC 2.5-30V

    1. 100% brand new and high quality. 2. Small and lightweight, easy to carry. 3. Display devices use high bright LED digital tube, stunning display effect. 4. With reverse polarity protection, reverse not burned. 5. The voltmeter only two wires, wiring simple and reliable performance. 6. Measuring Range: DC 2.5-30V. 7. Operation temperature: -10~65 degrees Celsius. 8. Red wire is connected to positive pole, and black wire to negative pole.Specification: Package Weight One Package Weight 0.04kgs / 0.09lb One Package Size 7cm * 3cm * 2.5cm / 2.76inch * 1.18inch * 0.98inch Qty per Carton 500 Carton Weight 15.00kgs / 33.07lb Carton Size 37cm * 32cm * 27cm / 14.57inch * 12.6inch * 10.63inch Loading Container 20GP: 834 cartons * 500 pcs = 417000 pcs 40HQ: 1936 cartons * 500 pcs = 968000 pcs

    3.187 Ft

  • TBD05853507W.jpg@77f6ee06ab36e8b357cbea7e7dc1cd23

    TVOC1 Portable CO2 Air Quality Formaldehyde Carbon Dioxide Detector Indoor Temperature Hygrometer with LED Digital Display(White)

    1. CO2 detection range: 400-6000PPM2. CO2 detection sensitivity: 1PPM3. Detection range: 0-2PPM4. Temperature measurement range: 0~60 degrees Celsius5. Temperature measurement accuracy: +/-1 degrees Celsius6. Humidity measurement range: 0%~99%RH7. Humidity measurement accuracy: +/-2%RH8. Charging method: DC5V 500mA micro USB interface9. Battery: Built-in lithium battery 1200mAh10. Size: 9 x 7 x 4cm/3.54 x 2.75 x 1.18inch11. Screen: about 2.75 inches12. Net weight: about 175gfeature:1. Five in one: It can be used as carbon dioxide concentration detection, thermometer and hygrometer at the same time.2. Built-in 1200mha lithium battery, fully charged can stand by for about 6-8 hours3. Color screen: display current CO2 data, temperature and humidity data. The color ring changes according to the CO2 content.4. Simple operation: long press the "on-off" button for 3 seconds to turn on and off. It will automatically detect CO2.5. Small and portable: it can be placed in the kitchen, living room, bedroom, or taken out.The package includes:1 x Carbon dioxide meter1 x USB charging cable1 x ManualSpecification: Package Weight One Package Weight 0.19kgs / 0.43lb One Package Size 12cm * 12cm * 5cm / 4.72inch * 4.72inch * 1.97inch Qty per Carton 100 Carton Weight 20.00kgs / 44.09lb Carton Size 50cm * 50cm * 40cm / 19.69inch * 19.69inch * 15.75inch Loading Container 20GP: 266 cartons * 100 pcs = 26600 pcs 40HQ: 619 cartons * 100 pcs = 61900 pcs

    16.284 Ft

  • TBD06017147.jpg@b3b01c3a112b1d7202a97fad9cc29a12

    TASI TA653B Large-Screen Noise Meter Wall-Mounted Decibel Meter

    1. Measuring range: 30dB-130dB2. Accuracy: +1.5dB (based on standard sound source, 94dB 1KHz)3. Frequency response: 31.5Hz-8. 5KHz4. Frequency weighting: A right5. Response time: about 2 times/second6. Sensor type: 6mm condenser microphone sensor7. Digital display: 3 digits8. Resolution: 0.1dB (less than 100dB), 1dB (greater than 100dB)9. Alarm prompt mode: sound + display10. Alarm output: 5V high level11. Power supply mode: DC5V 1A MicroUSB interface12. Over-range display: H/Lo13. Support system: XP, Win7, Win8, Win1014. Packing list: host x1, power cord x1, hanging hook x2, screws x2, manual x115. Size: about 32.3x17.3x4 cm16. Weight: about 980 gramsFeatures:1. High-precision sensitive probe, 6mm condenser microphone sensor, accurate measurement and sensitive response2. Large screen display, single word 4 inches, the display is clear and clear at a glance3. The back bracket design can be expanded or folded, and different placement methods can be selected according to different usage scenarios.4. A variety of fixing methods to meet different usage scenarios, wall-mounted/hanging/hidden bracket/external bracket5. Sound and light alarm, upper limit alarm value setting, the default alarm value is 130dB at power-on, when the measurement value exceeds the set alarm value, the instrument will sound an alarm and lock the measurement data6. Partial panel design, multiple cooling vents, safe and durable 7. Analog bar level indicator, noise decibel six bars indicator, 30-75dB is displayed in green, 76-130dB is displayed in red8. Alarm output, an external alarm can be connected, 3.5mm two/three section headphone plug9. Silicone operating buttons, comfortable to touch10. Storage function, the instrument automatically stores data every 2s, and the stored value is the larger noise value in 2s. It can be stored continuously for one year. After one year is up, the data of six months ago will be automatically cleared, which can be used by computer software. Export records11. Equipped with a USB interface, which can be connected to a computer and provide computer applications. It can communicate with the computer via USB, download records, real-time sampling, print icons and data, etc.Specification: Package Weight One Package Weight 1.48kgs / 3.26lb One Package Size 39.5cm * 23.2cm * 8.7cm / 15.55inch * 9.13inch * 3.43inch Qty per Carton 10 Carton Weight 14.50kgs / 31.97lb Carton Size 47cm * 45cm * 40cm / 18.5inch * 17.72inch * 15.75inch Loading Container 20GP: 315 cartons * 10 pcs = 3150 pcs 40HQ: 731 cartons * 10 pcs = 7310 pcs

    49.208 Ft

  • TBD0601741401A.jpg@dc286122cdfa8d806d9658cbf791ecbc

    4 In 1 Soil Detector Electronic Soil PH Tester(Single Machine)

    1. Material: plastic, metal2. Measuring range: PH pH, humidity, temperature, illuminance3. Scope of application: greenhouse flower garden, courtyard garden, greenhouse planting, etc.4. Power supply: 1 9V battery (not included)5. How to use: Insert vertically into the soil6. Size: about 32x6.5 cm, probe length is about 20cm7. Weight: about 158 gramsFeatures:1. 3S reads the test result, the data is accurate, suitable for all kinds of soil2. Low battery prompt and automatic shutdown function, automatic shutdown after five minutes without operation3. Light tube sensing, sensing at any time4. High-definition large-screen backlight panel, read data clearly5. One-key switching function, temperature conversion function, easy switching6. The metal probe, the long needle is made of metal and penetrates into the soilSpecification: Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 34cm * 8cm * 5.5cm / 13.39inch * 3.15inch * 2.17inch Qty per Carton 100 Carton Weight 21.00kgs / 46.30lb Carton Size 50cm * 50cm * 42cm / 19.69inch * 19.69inch * 16.54inch Loading Container 20GP: 253 cartons * 100 pcs = 25300 pcs 40HQ: 589 cartons * 100 pcs = 58900 pcs

    4.169 Ft

  • TBD0603275901.jpg@cad5adea2c5f8683e4e98eb12d5f92cb

    SNDWAY MT4 Battery Model Infrared Rangefinder High Precision Electronic Ruler Laser Rangefinder

    1. Aspheric optical focusing lens, low distortion and anti-interference performance, significantly reduce the influence of ambient light 2. Dual light-sensitive apertures, no horizontal bubble, no plus or minus measurement function storage function 3. Phase modulation, high frequency light signal emission 4. Phase optics, laser emission and reception enhancement 5. Single/continuous/area/volume/hookup 6. Measuring range: 40m 7. Measuring accuracy: 2mm 8. Automatic laser cut-off: 20 seconds 9. Automatic shut-off: 150 seconds 10. Operating temperature range: 0-40 degrees Celsius 11. Storage temperature range: -20 to 60 degrees Celsius 12. Power supply method: 2 x 1.5V batteries (product not included) 13. Packing list: main unit, manual, colour box 14. Material: ABS 15. Gross weight: 140gSpecification: Package Weight One Package Weight 0.14kgs / 0.32lb One Package Size 16cm * 9cm * 4cm / 6.3inch * 3.54inch * 1.57inch Qty per Carton 100 Carton Weight 16.00kgs / 35.27lb Carton Size 46cm * 40cm * 35cm / 18.11inch * 15.75inch * 13.78inch Loading Container 20GP: 414 cartons * 100 pcs = 41400 pcs 40HQ: 961 cartons * 100 pcs = 96100 pcs

    7.671 Ft

  • EDA004924401C.jpg@38bcc531f0c4663ef0b84cfc063620c1

    BHT-7000-GALW 95-240V AC 3A Smart Knob Water Heating Thermostat with Internal Sensor & WiFi Connection(Gold)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • EDA004924401A.jpg@ab3cbf7ae02932ad59fb3395a14fc83f

    BHT-7000-GALW 95-240V AC 3A Smart Knob Water Heating Thermostat with Internal Sensor & WiFi Connection(Black)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.25kgs / 0.55lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • EDA004924801A.jpg@ab3cbf7ae02932ad59fb3395a14fc83f

    BHT-7000-GBLW 95-240V AC 16A Smart Knob Electric Heating Thermostat with Internal Sensor & WiFi Connection(Black)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 16A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    26.618 Ft

  • EDA004924401B.jpg@7e2499b455728adaa11359258dc09dab

    BHT-7000-GALW 95-240V AC 3A Smart Knob Water Heating Thermostat with Internal Sensor & WiFi Connection(Silver)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • EDA004924901C.jpg@38bcc531f0c4663ef0b84cfc063620c1

    BHT-7000-GCLW 95-240V AC 3A Smart Knob Boiler Heating Thermostat with Internal Sensor & WiFi Connection(Gold)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • EDA004924801B.jpg@7e2499b455728adaa11359258dc09dab

    BHT-7000-GBLW 95-240V AC 16A Smart Knob Electric Heating Thermostat with Internal Sensor & WiFi Connection(Silver)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 16A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    26.618 Ft

  • EDA004924901A.jpg@ab3cbf7ae02932ad59fb3395a14fc83f

    BHT-7000-GCLW 95-240V AC 3A Smart Knob Boiler Heating Thermostat with Internal Sensor & WiFi Connection(Black)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.24kgs / 0.54lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • EDA004924801C.jpg@38bcc531f0c4663ef0b84cfc063620c1

    BHT-7000-GBLW 95-240V AC 16A Smart Knob Electric Heating Thermostat with Internal Sensor & WiFi Connection(Gold)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 16A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    26.618 Ft

  • EDA004924901B.jpg@7e2499b455728adaa11359258dc09dab

    BHT-7000-GCLW 95-240V AC 3A Smart Knob Boiler Heating Thermostat with Internal Sensor & WiFi Connection(Silver)

    Product Features:1. 1.32-inch circular layout, 240x240 LCD screen, highlighting your artistic taste.2. The ultra-fine aluminum knob provides a delicate experience for the fingertips.3. Adopt 6H high hardness tempered glass screen, which can avoid general scratches.4. Multi-mode interface control, sensitive buttons bring you an excellent experience.5. Built-in seven color atmosphere lights, adding different intelligent colors to your life.6. A variety of brushed back panels are available, suitable for different home styles.7. Widely applicable to electric radiators, electric cooling, and temperature control systems. It can be applied to smart homes, shopping malls, and industrial places.8. A variety of advanced option settings, there are 4 modes to choose from: manual/programming/temporary manual/holiday mode.9. Support WiFi connection and APP control, support control and adjust the temperature setting program in the mobile device, please download the APP (Smartlife) through the APP Store (iOS) or Google Play (Android) first.Product Parameters:1. Voltage range: 95~24 V AC, 50~60Hz or 24V DC/AC, 50~60Hz2. Current: 3A3. Sensor: NTC3950, 10K4. Temperature error: +/-1 degree Celsius5. Temperature control range: 5-35 degrees Celsius6. Room temperature range: 5-99 degrees Celsius7. Display temperature range: 5~99 degrees Celsius8. Normal working environment temperature: -10~45 degrees Celsius9. Normal working environment humidity: 5~95%RH (no condensation)10. Storage temperature: -10~45 degrees Celsius11. Power: less than 1.5W12. Time error: less than 1%13. Panel material: PC+ABS plastic (flame retardant)14. Install the embedded box: 86x86mm / European card box15. Wiring port: 2×1.5mm2 or 1×2.5mm216. Protection level: IP2017. Button type: capacitive touch button18. Screen: TFT screenProduct List:- Temperature controller x 1- Screw x 2- Instructions for use x 1- Wall Panel x 1Specification: Package Weight One Package Weight 0.25kgs / 0.54lb One Package Size 11cm * 9cm * 6cm / 4.33inch * 3.54inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 32cm * 30cm * 30cm / 12.6inch * 11.81inch * 11.81inch Loading Container 20GP: 925 cartons * 50 pcs = 46250 pcs 40HQ: 2149 cartons * 50 pcs = 107450 pcs

    25.777 Ft

  • TBD0604512301A.jpg@9b5430fd379b9d8d361dc096b61ec4ab

    5-in-1 Indoor Home Portable Air Monitor TVOC Formaldehyde Detector(W17 White)

    1. Measuring range: 400-50002. Measurement accuracy: 5PPM3. Measurement objects:W17 (carbon monoxide + carbon dioxide + formaldehyde + air quality + chemical pollutants)W17A (carbon monoxide + carbon dioxide + formaldehyde + temperature + humidity)4. Applicable scenes: indoors, in cars, public places, stations, gardens, schools5. Power: 5W6. Application technology: natural air flow detection technology7. Display mode: LED8. Error fluctuation: 0-30%9. Power on warm-up: 120 seconds10. Working voltage: 5V11. Battery capacity: 850mAh12. Charging time: about 3 hours13. Working time: about 180-240 minutes14. Product dimensions: 6.3 x 2.6 x 12 cm15. Product weight: about 235 gramsSpecification: Package Weight One Package Weight 0.23kgs / 0.50lb One Package Size 18cm * 9cm * 4cm / 7.09inch * 3.54inch * 1.57inch Qty per Carton 50 Carton Weight 12.30kgs / 27.12lb Carton Size 46cm * 38cm * 22cm / 18.11inch * 14.96inch * 8.66inch Loading Container 20GP: 693 cartons * 50 pcs = 34650 pcs 40HQ: 1609 cartons * 50 pcs = 80450 pcs

    10.746 Ft

  • TBD0604512301B.jpg@fd3a268af36a7ccc1902364a27ec0924

    5-in-1 Indoor Home Portable Air Monitor TVOC Formaldehyde Detector(W17A Light Gray)

    1. Measuring range: 400-50002. Measurement accuracy: 5PPM3. Measurement objects:W17 (carbon monoxide + carbon dioxide + formaldehyde + air quality + chemical pollutants)W17A (carbon monoxide + carbon dioxide + formaldehyde + temperature + humidity)4. Applicable scenes: indoors, in cars, public places, stations, gardens, schools5. Power: 5W6. Application technology: natural air flow detection technology7. Display mode: LED8. Error fluctuation: 0-30%9. Power on warm-up: 120 seconds10. Working voltage: 5V11. Battery capacity: 850mAh12. Charging time: about 3 hours13. Working time: about 180-240 minutes14. Product dimensions: 6.3 x 2.6 x 12 cm15. Product weight: about 235 gramsSpecification: Package Weight One Package Weight 0.23kgs / 0.50lb One Package Size 18cm * 9cm * 4cm / 7.09inch * 3.54inch * 1.57inch Qty per Carton 50 Carton Weight 12.30kgs / 27.12lb Carton Size 46cm * 38cm * 22cm / 18.11inch * 14.96inch * 8.66inch Loading Container 20GP: 693 cartons * 50 pcs = 34650 pcs 40HQ: 1609 cartons * 50 pcs = 80450 pcs

    10.746 Ft

  • EDA0062170.jpg@1643e05cb4dc70d13515104c0dac898b

    2UUL MT01 1000V Super Conductivity Sharp Hard Universal Multimeter Pen

    1. 1000V high voltage resistant, replaceable needle tip, flame retardant high temperature resistant, freeze Resistant non-hardening2. Stainless steel with gold-plated hands, and low internal resistance for better durability3. High-precision measurements for greater accuracy, tip diameter of only 0.2mm, suitable for measuring pad component pins, high precision, anti-oxidation, longer service life4. Flame retardant and high temperature resistant, soft, not easy to break the thread, high and low-temperature resistance, winter does not harden5. Non-slip silicone grips, grip sponge feels comfortable in your hand, made of insulating soft silicone material, effective anti-slip while not hurting hands, not hardened, comfortable to use when the hand feeling6. Soft plastic injection molding, anti-breakage design, thickened tinned copper wire, more conductive, double insulation soft silicone injection molding7. Package includes:A. 1 x Test PenB. 1 x CrowbarC. 4 x NeedlesSpecification: Package Weight One Package Weight 0.10kgs / 0.23lb One Package Size 20cm * 10cm * 2cm / 7.87inch * 3.94inch * 0.79inch Qty per Carton 100 Carton Weight 11.00kgs / 24.25lb Carton Size 52cm * 42cm * 22cm / 20.47inch * 16.54inch * 8.66inch Loading Container 20GP: 555 cartons * 100 pcs = 55500 pcs 40HQ: 1288 cartons * 100 pcs = 128800 pcs

    5.361 Ft

  • TBD0604550103.jpg@f35a2b4b5c491cd3ea73d6a5a4246337

    SINOTIMER STVP-932 63A 3-phase 380V LCD Self-resetting Adjustable Surge Voltage Protector

    Features:1. Overvoltage protection2. Under voltage protection3. Voltage display (voltage measurement ABC Separate Phase Voltage)4. Three-phase voltage unbalance protection5. Phase sequence protection (reverse phase protection)6. Zero break protection7. Phase failure protection8. Overvoltage protection value is adjustable9. Overvoltage recovery value is adjustable10. Overvoltage protection action time is adjustable11. Undervoltage protection value is adjustable12. Undervoltage recovery value is adjustable13. Undervoltage protection action time is adjustable14. Three-phase voltage unbalance protection value is adjustable15. Three-phase voltage unbalance protection action time is adjustable16. The power-on delay time is adjustable17. Fault recovery delay time is adjustable18. Reset mode selection19. Troubleshooting20. Restore factory settingsParameter:1. Rated voltage: three-phase four-wire 230V/400VAC 50/60Hz2. Rated current: 50A, 63A, 80A3. Overvoltage protection value range: 221V-300V-OFF (default value 280V)4. Overvoltage recovery value range: 220V-299V (default value 250V)5. Overvoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)6. Undervoltage protection value range: 219V-150V-OFF (default value 160V)7. Undervoltage recovery value range: 220V-151V (default value 180V)8. Undervoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)9. Three-phase voltage unbalance protection value range: 10%-50%-OFF10. Phase voltage unbalance protection action time: 0.1 seconds-10 seconds (default value 1.0 seconds)11. Power-on delay connection time: 2-255 seconds (default value 2 seconds)12. Failure recovery delay time: 2-512 seconds (default value 60 seconds)13. Display mode: LCD14. Fault indication: segment code characters15. Sampling method: phase line to neutral line resistance divided voltage AC sampling16. Grounding system: TT, TN-S, TN-C-S17. Installation method: guide rail installation18. Electrical isolation strength: greater than 2000VAC, pulse 2.5KV 1.2/50μS19. Working environment: temperature -20-50 degrees Celsius, humidity less than 85% altitude: no more than 2000mSpecification: Package Weight One Package Weight 0.36kgs / 0.79lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 48cm * 40cm * 28cm / 18.9inch * 15.75inch * 11.02inch Loading Container 20GP: 496 cartons * 66 pcs = 32736 pcs 40HQ: 1151 cartons * 66 pcs = 75966 pcs

    21.547 Ft

  • TBD0604550102.jpg@f35a2b4b5c491cd3ea73d6a5a4246337

    SINOTIMER STVP-932 50A 3-phase 380V LCD Self-resetting Adjustable Surge Voltage Protector

    Features:1. Overvoltage protection2. Under voltage protection3. Voltage display (voltage measurement ABC Separate Phase Voltage)4. Three-phase voltage unbalance protection5. Phase sequence protection (reverse phase protection)6. Zero break protection7. Phase failure protection8. Overvoltage protection value is adjustable9. Overvoltage recovery value is adjustable10. Overvoltage protection action time is adjustable11. Undervoltage protection value is adjustable12. Undervoltage recovery value is adjustable13. Undervoltage protection action time is adjustable14. Three-phase voltage unbalance protection value is adjustable15. Three-phase voltage unbalance protection action time is adjustable16. The power-on delay time is adjustable17. Fault recovery delay time is adjustable18. Reset mode selection19. Troubleshooting20. Restore factory settingsParameter:1. Rated voltage: three-phase four-wire 230V/400VAC 50/60Hz2. Rated current: 50A, 63A, 80A3. Overvoltage protection value range: 221V-300V-OFF (default value 280V)4. Overvoltage recovery value range: 220V-299V (default value 250V)5. Overvoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)6. Undervoltage protection value range: 219V-150V-OFF (default value 160V)7. Undervoltage recovery value range: 220V-151V (default value 180V)8. Undervoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)9. Three-phase voltage unbalance protection value range: 10%-50%-OFF10. Phase voltage unbalance protection action time: 0.1 seconds-10 seconds (default value 1.0 seconds)11. Power-on delay connection time: 2-255 seconds (default value 2 seconds)12. Failure recovery delay time: 2-512 seconds (default value 60 seconds)13. Display mode: LCD14. Fault indication: segment code characters15. Sampling method: phase line to neutral line resistance divided voltage AC sampling16. Grounding system: TT, TN-S, TN-C-S17. Installation method: guide rail installation18. Electrical isolation strength: greater than 2000VAC, pulse 2.5KV 1.2/50μS19. Working environment: temperature -20-50 degrees Celsius, humidity less than 85% altitude: no more than 2000mSpecification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 48cm * 40cm * 28cm / 18.9inch * 15.75inch * 11.02inch Loading Container 20GP: 496 cartons * 66 pcs = 32736 pcs 40HQ: 1151 cartons * 66 pcs = 75966 pcs

    20.859 Ft

  • TBD0604550104.jpg@f35a2b4b5c491cd3ea73d6a5a4246337

    SINOTIMER STVP-932 80A 3-phase 380V LCD Self-resetting Adjustable Surge Voltage Protector

    Features:1. Overvoltage protection2. Under voltage protection3. Voltage display (voltage measurement ABC Separate Phase Voltage)4. Three-phase voltage unbalance protection5. Phase sequence protection (reverse phase protection)6. Zero break protection7. Phase failure protection8. Overvoltage protection value is adjustable9. Overvoltage recovery value is adjustable10. Overvoltage protection action time is adjustable11. Undervoltage protection value is adjustable12. Undervoltage recovery value is adjustable13. Undervoltage protection action time is adjustable14. Three-phase voltage unbalance protection value is adjustable15. Three-phase voltage unbalance protection action time is adjustable16. The power-on delay time is adjustable17. Fault recovery delay time is adjustable18. Reset mode selection19. Troubleshooting20. Restore factory settingsParameter:1. Rated voltage: three-phase four-wire 230V/400VAC 50/60Hz2. Rated current: 50A, 63A, 80A3. Overvoltage protection value range: 221V-300V-OFF (default value 280V)4. Overvoltage recovery value range: 220V-299V (default value 250V)5. Overvoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)6. Undervoltage protection value range: 219V-150V-OFF (default value 160V)7. Undervoltage recovery value range: 220V-151V (default value 180V)8. Undervoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)9. Three-phase voltage unbalance protection value range: 10%-50%-OFF10. Phase voltage unbalance protection action time: 0.1 seconds-10 seconds (default value 1.0 seconds)11. Power-on delay connection time: 2-255 seconds (default value 2 seconds)12. Failure recovery delay time: 2-512 seconds (default value 60 seconds)13. Display mode: LCD14. Fault indication: segment code characters15. Sampling method: phase line to neutral line resistance divided voltage AC sampling16. Grounding system: TT, TN-S, TN-C-S17. Installation method: guide rail installation18. Electrical isolation strength: greater than 2000VAC, pulse 2.5KV 1.2/50μS19. Working environment: temperature -20-50 degrees Celsius, humidity less than 85% altitude: no more than 2000mSpecification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 48cm * 40cm * 28cm / 18.9inch * 15.75inch * 11.02inch Loading Container 20GP: 496 cartons * 66 pcs = 32736 pcs 40HQ: 1151 cartons * 66 pcs = 75966 pcs

    23.347 Ft

  • TBD0604550101.jpg@f35a2b4b5c491cd3ea73d6a5a4246337

    SINOTIMER STVP-932 40A 3-phase 380V LCD Self-resetting Adjustable Surge Voltage Protector

    Features:1. Overvoltage protection2. Under voltage protection3. Voltage display (voltage measurement ABC Separate Phase Voltage)4. Three-phase voltage unbalance protection5. Phase sequence protection (reverse phase protection)6. Zero break protection7. Phase failure protection8. Overvoltage protection value is adjustable9. Overvoltage recovery value is adjustable10. Overvoltage protection action time is adjustable11. Undervoltage protection value is adjustable12. Undervoltage recovery value is adjustable13. Undervoltage protection action time is adjustable14. Three-phase voltage unbalance protection value is adjustable15. Three-phase voltage unbalance protection action time is adjustable16. The power-on delay time is adjustable17. Fault recovery delay time is adjustable18. Reset mode selection19. Troubleshooting20. Restore factory settingsParameter:1. Rated voltage: three-phase four-wire 230V/400VAC 50/60Hz2. Rated current: 50A, 63A, 80A3. Overvoltage protection value range: 221V-300V-OFF (default value 280V)4. Overvoltage recovery value range: 220V-299V (default value 250V)5. Overvoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)6. Undervoltage protection value range: 219V-150V-OFF (default value 160V)7. Undervoltage recovery value range: 220V-151V (default value 180V)8. Undervoltage protection action time is adjustable: 0.1 seconds-10 seconds (default value 0.2 seconds)9. Three-phase voltage unbalance protection value range: 10%-50%-OFF10. Phase voltage unbalance protection action time: 0.1 seconds-10 seconds (default value 1.0 seconds)11. Power-on delay connection time: 2-255 seconds (default value 2 seconds)12. Failure recovery delay time: 2-512 seconds (default value 60 seconds)13. Display mode: LCD14. Fault indication: segment code characters15. Sampling method: phase line to neutral line resistance divided voltage AC sampling16. Grounding system: TT, TN-S, TN-C-S17. Installation method: guide rail installation18. Electrical isolation strength: greater than 2000VAC, pulse 2.5KV 1.2/50μS19. Working environment: temperature -20-50 degrees Celsius, humidity less than 85% altitude: no more than 2000mSpecification: Package Weight One Package Weight 0.41kgs / 0.91lb One Package Size 12cm * 10cm * 7cm / 4.72inch * 3.94inch * 2.76inch Qty per Carton 66 Carton Weight 30.00kgs / 66.14lb Carton Size 48cm * 40cm * 28cm / 18.9inch * 15.75inch * 11.02inch Loading Container 20GP: 496 cartons * 66 pcs = 32736 pcs 40HQ: 1151 cartons * 66 pcs = 75966 pcs

    19.667 Ft

  • TBD0604553601A.jpg@a71f72ac90f39c522ca750e5eb8aec4a

    FNIRSI Laser Range Finder Infrared Measuring Ruler(Gray)

    1. Laser type: 620-670nm2. Measurement time: 0.1~3s3. Resolution: 1mm4. Unit: m/ft/in5. Measuring range: 0.05~40m6. Covers a variety of measurement modes to easily meet the measurement needs of various scenarios: single measurement, multiple measurements, area measurement, volume measurement, primary Pythagorean, secondary Pythagorean, front and rear benchmarks, unit switching7. High-precision laser ranging, intelligent algorithm, distance measurement is completed instantly with an accuracy of 0.002m, and the measurement is fast and accurate8. LCD high-definition display, clear readings, equipped with gravity-sensing automatic flip design9. Double button operation, easy to operate and not easy to operate accidentally.10. Built-in 400mAh large-capacity lithium battery, Type-C universal charging port for fast charging, long-lasting battery life, and can meet the needs of 3000 continuous measurements when fully charged11. Linked with Mijia APP to realize data synchronization/notes, length/area/volume calculation, floor plan drawing, real-shot recording and other functions12. Dimensions: 34.5x79x19mmSpecification: Package Weight One Package Weight 0.13kgs / 0.29lb One Package Size 12cm * 9cm * 3cm / 4.72inch * 3.54inch * 1.18inch Qty per Carton 176 Carton Weight 23.45kgs / 51.70lb Carton Size 50cm * 38cm * 35cm / 19.69inch * 14.96inch * 13.78inch Loading Container 20GP: 401 cartons * 176 pcs = 70576 pcs 40HQ: 930 cartons * 176 pcs = 163680 pcs

    17.186 Ft

  • TBD0604562601A.jpg@ef8c100ec50100e753bce80c3f5347e1

    FNIRSI 2 In 1 Small Handheld Fluorescence Digital Dual-Channel Oscilloscope, US Plug(Yellow)

    1. Sampling rate: 500msps2. Input coupling: DC/AC3. Rise time: 2.5 nss4. Storage depth: 120kpts5. Input impedance: 1MQ-18PF6. Screen size: 2.8 inches7. Resolution: 320x2408. Expansion interface: USB transmission interface9. Battery: 3000mAh10. Size: 135mmx90mmx40mm11. The machine can be set to English, Chinese, Russian, Portuguese12. 180mhz bandwidth and 500msps real-time sampling rate13. Grayscale and color temperature display Multi-level grayscale display capability, waveform changes are clearly reflected14. 50000WFMS/S waveform refresh rate makes abnormal waveforms nowhere to hide15. Three trigger modes: automatic, single, normal; rising edge, falling edge16. Adaptive adjustable trigger suppression, adaptive to high frequency, low frequency and noise signals, making the waveform clean and stable17. Provide additional magnification time basis, which can provide 2~1000 times magnification viewing effect in running or paused state.18. Supports digital phosphor technology, the closed curve graph generated by dual channels can be used to compare the amplitude, frequency and phase of the two sets of signals19. The analog front-end adopts excellent shielding measures and a stable feedback system. All parts with interference sources are kept away from the analog front-end.20. The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component. When turned on, the -3DB attenuation bandwidth is 20MHz.21. Cut off part or all of the various signals measured by the oscilloscope as the output signal of the signal generator, and store up to 500 customized signals22. The design of the analog front-end input stage adopts a high-voltage withstand design. The overall design can reach 400V withstand voltage, which can prevent burnout at any gear.23. Built-in 3000mah large-capacity rechargeable lithium battery, battery life up to 4 hours, scheduled shutdown for 5 minutes to 2 hours (can be set)24. Equipped with an efficient one-button automatic adjustment function, signal measurement is simple and fast, and the cursor can accurately measure waveform parameters.25. Built-in 120Mbit storage space, which can store 250 sets of waveforms and 90 screenshots. Full-screen pictures can be viewed and secondary analysis of saved waveform data can be performed.26. Connect the computer via USB cable and copy the system image file iso to the USB flash drive for upgrade. You can also directly view or copy the BMP image file saved in the oscilloscope.Specification: Package Weight One Package Weight 0.67kgs / 1.47lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 42cm / 19.69inch * 12.6inch * 16.54inch Loading Container 20GP: 396 cartons * 20 pcs = 7920 pcs 40HQ: 921 cartons * 20 pcs = 18420 pcs

    78.926 Ft

  • TBD0604557501.jpg@55078bd1872be5b4e1726e0c56dd0042

    FNIRSI 3 In 1 Handheld Digital Oscilloscope Dual-Channel Multimeter, Specification: Standard

    Oscilloscope function introduction:1. Dual channel 2X10MHz bandwidth, 50MS/s real-time sampling rate2. Measuring voltage: 400V (MAX)3. FPGA+ADC+MCU high-performance hardware architecture, waveform details are captured without loss4. With complete trigger functions (automatic, single, regular)5. Equipped with efficient one-button automatic adjustment, the measured waveform can be displayed without cumbersome adjustments.6. Save waveform screenshots and support exporting pictures to the computer to facilitate secondary waveform analysis.Multimeter function introduction:1. Four-digit integer 9999 count true effective value measurement2. Voltage, current, capacitance, resistance, diode, continuity, zero line identification, temperature3. Measuring voltage: AC750V, DC1000V (MAX)4. Automatic range, intelligent anti-burning5. Data retention, color screen digital displayIntroduction to signal generator functions1. 7 signal waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC2. Output frequency: 1Hz-2MHz3. Output amplitude: 0.1-3.3V4. Output duty cycle: 0-1001. Screen: 2.8-inch true color screen2. Resolution: 320 x 2403. Charging: TYPE-C (5V/1A)4. Battery: 3000mAh lithium battery5. Supported functions: oscilloscope, signal generator, digital multimeter6. Standby time: 8 hours7. Language: English, Russian, Portuguese, Japanese, German8. Size: 141.7x93.5x38mm9. Weight: 300g10. The hardware architecture adopts the same ARM + FPGA + high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. The trigger system is powerful and has super waveform capture capabilities without losing the waveform details.11. It has complete trigger modes: automatic, single, and normal; equipped with efficient one-button automatic adjustment, which can display the measured signal waveform without cumbersome adjustments.12. Save waveform screenshots with one click. The saved pictures can be viewed on an oscilloscope or exported to a computer to facilitate secondary analysis of the collected signals.13. Intelligent anti-burning has overload protection, and built-in double fuses prevent meter burning and are safer14. 3000mah large-capacity lithium battery, TYPE-C port can be recharged worry-free and labor-saving, and has a long battery life of 8 hours15. The extendable stand can be used and placed for easy reading.16. ABS material + silicone jacket, sturdy and anti-fall, comfortable to the touchEnglish standard:1. 2C23T x 12. 10x probe x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. Instructions x 1English upgrade:1. 2C23T x 12. Instructions x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. 10x probe x 2Specification: Package Weight One Package Weight 0.70kgs / 1.54lb One Package Size 26cm * 13cm * 9cm / 10.24inch * 5.12inch * 3.54inch Qty per Carton 20 Carton Weight 13.50kgs / 29.76lb Carton Size 54cm * 29cm * 45cm / 21.26inch * 11.42inch * 17.72inch Loading Container 20GP: 378 cartons * 20 pcs = 7560 pcs 40HQ: 878 cartons * 20 pcs = 17560 pcs

    40.428 Ft

  • TBD0604557502.jpg@55078bd1872be5b4e1726e0c56dd0042

    FNIRSI 3 In 1 Handheld Digital Oscilloscope Dual-Channel Multimeter, Specification: Upgrade

    Oscilloscope function introduction:1. Dual channel 2X10MHz bandwidth, 50MS/s real-time sampling rate2. Measuring voltage: 400V (MAX)3. FPGA+ADC+MCU high-performance hardware architecture, waveform details are captured without loss4. With complete trigger functions (automatic, single, regular)5. Equipped with efficient one-button automatic adjustment, the measured waveform can be displayed without cumbersome adjustments.6. Save waveform screenshots and support exporting pictures to the computer to facilitate secondary waveform analysis.Multimeter function introduction:1. Four-digit integer 9999 count true effective value measurement2. Voltage, current, capacitance, resistance, diode, continuity, zero line identification, temperature3. Measuring voltage: AC750V, DC1000V (MAX)4. Automatic range, intelligent anti-burning5. Data retention, color screen digital displayIntroduction to signal generator functions1. 7 signal waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC2. Output frequency: 1Hz-2MHz3. Output amplitude: 0.1-3.3V4. Output duty cycle: 0-1001. Screen: 2.8-inch true color screen2. Resolution: 320 x 2403. Charging: TYPE-C (5V/1A)4. Battery: 3000mAh lithium battery5. Supported functions: oscilloscope, signal generator, digital multimeter6. Standby time: 8 hours7. Language: English, Russian, Portuguese, Japanese, German8. Size: 141.7x93.5x38mm9. Weight: 300g10. The hardware architecture adopts the same ARM + FPGA + high-speed ADC solution as that of desktop computers. It has high cost and is an unusual CPU direct acquisition solution. The trigger system is powerful and has super waveform capture capabilities without losing the waveform details.11. It has complete trigger modes: automatic, single, and normal; equipped with efficient one-button automatic adjustment, which can display the measured signal waveform without cumbersome adjustments.12. Save waveform screenshots with one click. The saved pictures can be viewed on an oscilloscope or exported to a computer to facilitate secondary analysis of the collected signals.13. Intelligent anti-burning has overload protection, and built-in double fuses prevent meter burning and are safer14. 3000mah large-capacity lithium battery, TYPE-C port can be recharged worry-free and labor-saving, and has a long battery life of 8 hours15. The extendable stand can be used and placed for easy reading.16. ABS material + silicone jacket, sturdy and anti-fall, comfortable to the touchEnglish standard:1. 2C23T x 12. 10x probe x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. Instructions x 1English upgrade:1. 2C23T x 12. Instructions x 13. Red and black alligator clip probe x 14. Multimeter lead x 15. Charging cable x 16. Packing box x 17. 10x probe x 2Specification: Package Weight One Package Weight 0.76kgs / 1.66lb One Package Size 26cm * 13cm * 9cm / 10.24inch * 5.12inch * 3.54inch Qty per Carton 20 Carton Weight 13.50kgs / 29.76lb Carton Size 54cm * 29cm * 45cm / 21.26inch * 11.42inch * 17.72inch Loading Container 20GP: 378 cartons * 20 pcs = 7560 pcs 40HQ: 878 cartons * 20 pcs = 17560 pcs

    42.754 Ft

  • TBD0604560701A.jpg@9dd12edfca8da78874800298530ede08

    FNIRSI Fully Automatic Digital Display High Precision Intelligent Multimeter(DMT-99)

    1. DC voltage: 9.999V/99.99V/999.9V2. AC voltage: 9.999V/99.99V/750.0V3. DC current: 9999uA/99.99mA/999.9mA/9.999A4. AC current: 9999uA/99.99mA1999.9mA/9.999A5. Frequency: 9.999MΗz/999.9KHz/9999KΗz/9.999KΗz/999.99Ηz/99.99Hz/9.999Hz6. General modes: automatic, voltage, resistance, diode/on-off capacitance, current, frequency, temperature, NCV sensing voltage, LIVE zero-fire wire measurement7. Record mode: real-time measurement curve, record the value of the measurement and save the measurement data.8. Monitoring mode: when the measured value is greater or less than the set threshold value, the buzzer of the device will ring and the display will also prompt.9. TFT high-definition colour screen, the screen reads clearly, the visual colour is richer.10. 1500mAh lithium battery, TYPE-C charging interface, more convenient for power supply.11. Built-in intelligent anti-burning chip and double ceramic fuse, with overload protection, to prevent misuse of the burn table, safer to use12. automatic identification, high-precision intelligent detection13. non-contact measurement, insulation power measurement, more secure, close to the detection point if the induction of AC electromagnetic field, in addition to the buzzer alarm, the screen can be seen on the magnetic field strength changes14. small size, snap type storage meter pen so that the toolkit to reduce clutter, more convenient to carry15. Key design one-handed direct switching, convenient and fast, improve work efficiency16. 100,000 times durability test, durable and not easily affected by the environmentSpecification: Package Weight One Package Weight 0.45kgs / 0.99lb One Package Size 21cm * 12cm * 8cm / 8.27inch * 4.72inch * 3.15inch Qty per Carton 50 Carton Weight 21.00kgs / 46.30lb Carton Size 62cm * 42cm * 45cm / 24.41inch * 16.54inch * 17.72inch Loading Container 20GP: 227 cartons * 50 pcs = 11350 pcs 40HQ: 528 cartons * 50 pcs = 26400 pcs

    20.265 Ft

  • TBD0604561401.jpg@c6db3b816baa77aa8a1957422b0fb2eb

    FNIRSI 3 In 1 Handheld Digital Oscilloscope LCR Transistor Tester, Specification: Standard

    1. Display: 2.4-inch TFT colour screen, LED backlighting2. Supply voltage: built-in 1500mAh rechargeable lithium battery3. Charging specification: USB Type-C, +5V4. Product volume: 79x103x31mm5. Real-time sampling rate: 10MSa / s6. Analogue bandwidth: 500Khz7. Input impedance: 1 milliohm8. Coupling method: AC/DC9. Test voltage range: 400V10. Vertical sensitivity: 10mV-10V11. Horizontal time base range: 1us-10s12. Trigger mode automatic: normal single13. Trigger type: rising edge/falling edge14. Compact body, simple modelling, easy to use, to meet the measurement routine15. Automatic identification and measurement of various transistors, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual-diode thyristors, etc., as well as resistors, inductors, capacitors and other passive components16. Built-in 1500mAh high-capacity lithium battery, power supply continuous operation without isolation transformer, safer to use17. 2.4-inch anti-see-through high-resolution display, allowing you to read clearly even in bright sunlight18. One-piece folding, placed in a stable support, does not take up space19. Size: 79x103x31mmStandard:- DSO-TC3 Tester x 1-Type-C charging cable x 1-Common probe x 1-Test Hook x 3Upgrade:-DSO-TC3 Tester x 1-Adaptor x 1-P6100 High Voltage Probe x 1-Type-C charging cable x 1-Normal Probe x 1-Test Hook x 1Specification: Package Weight One Package Weight 0.32kgs / 0.71lb One Package Size 13cm * 18cm * 6cm / 5.12inch * 7.09inch * 2.36inch Qty per Carton 50 Carton Weight 16.00kgs / 35.27lb Carton Size 64cm * 32cm * 31cm / 25.2inch * 12.6inch * 12.2inch Loading Container 20GP: 420 cartons * 50 pcs = 21000 pcs 40HQ: 975 cartons * 50 pcs = 48750 pcs

    29.436 Ft

  • TBD0604561402.jpg@07b60c75dd7082d350828686f8603784

    FNIRSI 3 In 1 Handheld Digital Oscilloscope LCR Transistor Tester, Specification: Upgrade

    1. Display: 2.4-inch TFT colour screen, LED backlighting2. Supply voltage: built-in 1500mAh rechargeable lithium battery3. Charging specification: USB Type-C, +5V4. Product volume: 79x103x31mm5. Real-time sampling rate: 10MSa / s6. Analogue bandwidth: 500Khz7. Input impedance: 1 milliohm8. Coupling method: AC/DC9. Test voltage range: 400V10. Vertical sensitivity: 10mV-10V11. Horizontal time base range: 1us-10s12. Trigger mode automatic: normal single13. Trigger type: rising edge/falling edge14. Compact body, simple modelling, easy to use, to meet the measurement routine15. Automatic identification and measurement of various transistors, including NPN and PNP transistors, N-channel and P-channel FETs, junction FETs, diodes, dual-diode thyristors, etc., as well as resistors, inductors, capacitors and other passive components16. Built-in 1500mAh high-capacity lithium battery, power supply continuous operation without isolation transformer, safer to use17. 2.4-inch anti-see-through high-resolution display, allowing you to read clearly even in bright sunlight18. One-piece folding, placed in a stable support, does not take up space19. Size: 79x103x31mmStandard:- DSO-TC3 Tester x 1-Type-C charging cable x 1-Common probe x 1-Test Hook x 3Upgrade:-DSO-TC3 Tester x 1-Adaptor x 1-P6100 High Voltage Probe x 1-Type-C charging cable x 1-Normal Probe x 1-Test Hook x 1Specification: Package Weight One Package Weight 0.40kgs / 0.89lb One Package Size 13cm * 18cm * 6cm / 5.12inch * 7.09inch * 2.36inch Qty per Carton 50 Carton Weight 20.00kgs / 44.09lb Carton Size 64cm * 32cm * 31cm / 25.2inch * 12.6inch * 12.2inch Loading Container 20GP: 420 cartons * 50 pcs = 21000 pcs 40HQ: 975 cartons * 50 pcs = 48750 pcs

    31.794 Ft

  • TBD0604565301A.jpg@c5ed3fa044cffee6ab4b4c012467c742

    FNIRSI Noise Decibel Meter Home Volume Detector(Yellow)

    1. Accuracy: 1.5dB (based on standard sound source, 94dB@1KHz)2. Frequency range: 31.5Hz-8.5KHz3. Dynamic range: 3.50dB4. Measuring range: 30-130dB5. Digital display: 4 digits, resolution 0.1dB, sampling rate 2 times/second6. Dynamic scale display: 1 scale represents 2dB, sampling rate is 2 times/second7. Dynamic scale range: 30-130dB8. Overload indication: "OVER" and "UNDER" symbols indicate9. Dynamic characteristics: two reaction speeds: FAST (fast) and SLOW (slow)10. Microphone: 6mm condenser microphone11. Battery: 600Mah/3.7V lithium battery12. Dual mode switching, sensitivity adjustable13. 0.6mm high-precision sensor, accurate capture, immediate response 6cm sound guide tube & silicone pad sound insulation and waterproof pad, enhanced performance14. Built-in 600Mah lithium battery, Typc-C charging head interface15. VA color screen, ultra-clear backlight, clear readings, with alarm indicator light16. Prompt when the upper/lower limit is exceeded. The upper and lower alarm limits can be set separately.17. Windshield design blocks all interference and is accurate.18. Anti-slip silicone buttons, skin-friendly, rebound and comfortable to the touch19. ABS shell, anti-fall and durable20. Dimensions: 190x61x31mmSpecification: Package Weight One Package Weight 0.33kgs / 0.74lb One Package Size 22cm * 10cm * 5cm / 8.66inch * 3.94inch * 1.97inch Qty per Carton 36 Carton Weight 12.98kgs / 28.62lb Carton Size 46cm * 32cm * 32cm / 18.11inch * 12.6inch * 12.6inch Loading Container 20GP: 566 cartons * 36 pcs = 20376 pcs 40HQ: 1314 cartons * 36 pcs = 47304 pcs

    16.353 Ft

  • TBD0604562601B.jpg@58f7b41d05b6a49237e1626773a5398a

    FNIRSI 2 In 1 Small Handheld Fluorescence Digital Dual-Channel Oscilloscope, US Plug(Blue)

    1. Sampling rate: 500msps2. Input coupling: DC/AC3. Rise time: 2.5 nss4. Storage depth: 120kpts5. Input impedance: 1MQ-18PF6. Screen size: 2.8 inches7. Resolution: 320x2408. Expansion interface: USB transmission interface9. Battery: 3000mAh10. Size: 135mmx90mmx40mm11. The machine can be set to English, Chinese, Russian, Portuguese12. 180mhz bandwidth and 500msps real-time sampling rate13. Grayscale and color temperature display Multi-level grayscale display capability, waveform changes are clearly reflected14. 50000WFMS/S waveform refresh rate makes abnormal waveforms nowhere to hide15. Three trigger modes: automatic, single, normal; rising edge, falling edge16. Adaptive adjustable trigger suppression, adaptive to high frequency, low frequency and noise signals, making the waveform clean and stable17. Provide additional magnification time basis, which can provide 2~1000 times magnification viewing effect in running or paused state.18. Supports digital phosphor technology, the closed curve graph generated by dual channels can be used to compare the amplitude, frequency and phase of the two sets of signals19. The analog front-end adopts excellent shielding measures and a stable feedback system. All parts with interference sources are kept away from the analog front-end.20. The analog front end has a built-in switchable 20MHz hardware bandwidth limiting component. When turned on, the -3DB attenuation bandwidth is 20MHz.21. Cut off part or all of the various signals measured by the oscilloscope as the output signal of the signal generator, and store up to 500 customized signals22. The design of the analog front-end input stage adopts a high-voltage withstand design. The overall design can reach 400V withstand voltage, which can prevent burnout at any gear.23. Built-in 3000mah large-capacity rechargeable lithium battery, battery life up to 4 hours, scheduled shutdown for 5 minutes to 2 hours (can be set)24. Equipped with an efficient one-button automatic adjustment function, signal measurement is simple and fast, and the cursor can accurately measure waveform parameters.25. Built-in 120Mbit storage space, which can store 250 sets of waveforms and 90 screenshots. Full-screen pictures can be viewed and secondary analysis of saved waveform data can be performed.26. Connect the computer via USB cable and copy the system image file iso to the USB flash drive for upgrade. You can also directly view or copy the BMP image file saved in the oscilloscope.Specification: Package Weight One Package Weight 0.68kgs / 1.51lb One Package Size 25cm * 15cm * 8cm / 9.84inch * 5.91inch * 3.15inch Qty per Carton 20 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 32cm * 42cm / 19.69inch * 12.6inch * 16.54inch Loading Container 20GP: 396 cartons * 20 pcs = 7920 pcs 40HQ: 921 cartons * 20 pcs = 18420 pcs

    78.926 Ft

  • TBD0604565001A.jpg@f88aa82ee966491e986e5fe4ff2cc1cd

    FNIRSI Multifunctional Wall Wire And Metal Rebar Detector(WD-02)

    1. Automatic shutdown: after 5 minutes of no operation2. Ferrous metal detection depth: 120mm3. Non-ferrous metal (copper) detection depth: 100mm4. AC detection depth: 50mm5. Detection depth of single copper wire: 40mm6. Wooden block detection depth: 20mm in precision mode; 38mm in depth mode7. Three modes, metal, cable and wood detection8. Accurate detection, anti-interference high-performance module9. Detection warning, indicator light, buzzer, and screen display prompts10. Positioning mark, center hole design11. Type-C charging, built-in 300mAh rechargeable lithium battery12. Plush bottom pad, non-slip, wear-resistant and does not damage the machine13. The sensitivity can be adjusted in real time according to needs. The lower the sensitivity, the higher the accuracy (please adjust according to the use environment)14. High-performance anti-interference chip, reducing false alarms, more accurate detection depth, and faster positioning15. 6 languages can be set (Simplified Chinese, Traditional Chinese, English, Japanese, Portuguese, Russian)16. Setting functions (sensitivity, language, volume, length unit, shutdown time, factory reset)17. Size: 138x68x22mm18. Weight: 122gSpecification: Package Weight One Package Weight 0.29kgs / 0.64lb One Package Size 20cm * 10cm * 5cm / 7.87inch * 3.94inch * 1.97inch Qty per Carton 50 Carton Weight 13.70kgs / 30.20lb Carton Size 51cm * 42cm * 26cm / 20.08inch * 16.54inch * 10.24inch Loading Container 20GP: 478 cartons * 50 pcs = 23900 pcs 40HQ: 1111 cartons * 50 pcs = 55550 pcs

    22.981 Ft

  • TBD0604564301A.jpg@e8e26ededc37ec94f4cc9e7356a6e5e0

    FNIRSI 0-12V/0-4-24mA Handheld Positive Negative Voltage Current Signal Generator(Without Battery)

    1. The 0-10V/0-22mA voltage and current source signal generator is the most commonly used electrical test instrument by electrical engineering technicians during the installation, debugging, overhaul and maintenance of on-site electrical equipment. It is also used in scientific research, teaching experiments and other applications. It is also widely used in the field of2. In smart mode, the voltmeter automatically measures voltage, resistance and continuity. It can identify the measurement content and select the resolution range, making the measurement more convenient and faster.3. Easy to use, USB direct plug-in power supply, no need to manually replace the battery, more convenient4. Micro USB universal interface, can be connected to power bank/charger/computer USB port, etc.Plug-in terminals for safe and convenient wiring5. 4-digit high-definition digital tube, uniform and adjustable display brightness (1-8 levels of brightness)6. Set a voltage and current value, click the encoder to save, and restart to directly display the saved value. There is no need to adjust parameters every time you turn on the machine. It is highly practical.7. The small handheld signal source is easy to carry and a powerful tool for on-site debugging.8. Size: 89 x 69 x 28mm9. Weight: 95 gramsSpecification: Package Weight One Package Weight 0.11kgs / 0.25lb One Package Size 10cm * 9cm * 5cm / 3.94inch * 3.54inch * 1.97inch Qty per Carton 96 Carton Weight 11.66kgs / 25.71lb Carton Size 42cm * 38cm * 32cm / 16.54inch * 14.96inch * 12.6inch Loading Container 20GP: 522 cartons * 96 pcs = 50112 pcs 40HQ: 1212 cartons * 96 pcs = 116352 pcs

    9.135 Ft

  • TBD06045991.jpg@108362ba23d0ee2cbc8a61aac8ea3876

    Outdoor Archeology Underground Necklace Ring Treasure Hunt

    1. Metal detector to find coins, relics, jewelry, gold and silver anywhereThe detector has high sensitivity and strong resolution2. Wide range of uses and easy to use3. Widely used in: detection of metal objects buried underground, security inspection, professional treasure hunting, material inspection, etc.4. LCD display: Displays possible metal types, target depth, disc and notch range, sensor level and battery status, it also has a digital display of the target5. Three-tone audio recognition: There are three different tones (high, medium and low) for different types of metals6. Function: Ignore junk metal and find valuable items by setting the gap range7. Disc: Distinguish unwanted targets by setting the disc digital range, the detector will not detect targets beyond the digital setting8. LCD with backlight: used in dark areas9. Ultra-slow scanning identification: Use very slow scanning coils to identify different types of metals10. Headphone jack: allows you to connect 3.5mm headphones (headphones not provided) and operate without glitches11. 250mm waterproof search coil12. Adjustable shaft: allows you to adjust the length of the shaft for ease of use13. Power supply: two 9-volt alkaline batteries (not included)Specification: Package Weight One Package Weight 1.30kgs / 2.87lb One Package Size 41cm * 23cm * 12cm / 16.14inch * 9.06inch * 4.72inch Qty per Carton 2 Carton Weight 3.70kgs / 8.16lb Carton Size 43cm * 25cm * 26cm / 16.93inch * 9.84inch * 10.24inch Loading Container 20GP: 954 cartons * 2 pcs = 1908 pcs 40HQ: 2214 cartons * 2 pcs = 4428 pcs

    34.170 Ft

  • TBD0604599501A.jpg@ac0ded1476f1c2d2659af64ed15c8d90

    Mini Waterproof Handheld Metal Positioning Rod Detector(Orange)

    1. Material: ABS2. Convenient design of lanyard to improve efficiency3. Comes with matching leather case, easy to take and take when testing, easy to carry4. Convenient holster helps secure this detector to any standard size belt5. Equipped with sensitivity adjustment button, suitable for different detection needs6. Long press the power button to switch alarm modes: sound, vibration, sound + vibration7. Using 9V battery, long-lasting battery life without frequent battery replacement (battery not included)8. Weight: 175g9. Overall dimensions: 255x40x15mmPacking list:- Metal positioning rod x 1- Anti-lost spring rope x 1- Leather case x 1- English manual x 1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 28cm * 6cm * 6cm / 11.02inch * 2.36inch * 2.36inch Qty per Carton 30 Carton Weight 8.60kgs / 18.96lb Carton Size 30cm * 38cm * 32cm / 11.81inch * 14.96inch * 12.6inch Loading Container 20GP: 730 cartons * 30 pcs = 21900 pcs 40HQ: 1696 cartons * 30 pcs = 50880 pcs

    11.221 Ft

  • TBD06046013.jpg@1cd2a496939b11a76799314adad7af8f

    SINOTIMER MH0348-DIN Intelligent High-Precision Temperature Humidity Controller Guide Rail Installation

    1. Operating power: AC220V, 50HZ2. Power consumption: less than 2W3. Resolution: 0.14. Temperature range: -40.0-80 degrees Celsius5. Humidity range: 0-99.9%6. Basic error: temperature: less than 0.5% FS; humidity: less than 4.5% FS7. Display device: LED8. Control output: AC250V 3A (resistive load) 9. Operating environment: -10 - 50 degrees Celsius, 45-85% RH10. External size: about 4.8 x 4.8 x 8.5cm11. Hole size: about 4.5 x 4.5cmMain Uses:1. Suitable for bakehouse, grain storage, warehouse, machine room, breeding, textile industry and other need for automatic dehumidification or humidification and automatic exhaust temperature or heating occasions2. Suitable for automatic heating and dehumidification of outdoor terminal box and distribution box, preventing all kinds of malfunctioning accidents caused by creepage between terminals3. Suitable for automatic heating and dehumidification of indoor high-voltage power distribution equipment and high-voltage switch operating mechanism, automatic heating in low-temperature environments to prevent switch malfunction caused by insulation creepage and mechanism failure in low-temperature environments4. Apply to the switching mechanism box, trolley type switchgear, medium-set cabinet, box transformer and other equipment in the box for a number of parts of the moisture-proof, low-temperature on-line monitoringFeatures:1. Real-time display of temperature and humidity, optional modules can realize the temperature and humidity transmission output and RS485 communication function2. Using high-performance, high-precision, corrosion-resistant, long-life digital temperature and humidity sensors, wide measurement range, good linearity, can work reliably for a long time in a variety of environments3. 4 wires for temperature and humidity signal transmission, the distance between the sensor and the instrument can be within 30mSpecification: Package Weight One Package Weight 0.30kgs / 0.67lb One Package Size 11cm * 11cm * 9cm / 4.33inch * 4.33inch * 3.54inch Qty per Carton 45 Carton Weight 14.00kgs / 30.86lb Carton Size 47cm * 35cm * 35cm / 18.5inch * 13.78inch * 13.78inch Loading Container 20GP: 463 cartons * 45 pcs = 20835 pcs 40HQ: 1075 cartons * 45 pcs = 48375 pcs

    16.541 Ft

  • TBD06045992.jpg@d1d95fe5c36705cfb9621b18f2911bbe

    SINOTIMER MH0302 Intelligent High Precision Temperature Humidity Controller Digital Display Temperature and Humidity Meter

    1. Operating power: AC220V, 50HZ2. Power consumption: less than 2W3. Resolution: 0.14. Setting temperature: -40.0-120 degrees Celsius5. Setting humidity: 0-99.9%6. Basic error: temperature: less than 0.5% FS; humidity: less than 4.5% FS7. Display device: LED (0. 56 inch)8. Control output: AC250V 3A (resistive load) 9. Operating environment: -10 - 50 degrees Celsius, 45-85% RH10. External size: about 7.2 x 7.2 x 8cm11. Opening size: about 6.8 x 6.8cmMain uses:1. Apply to the baking room, grain depot, warehouse, machine room, breeding, textile industry and other need for automatic dehumidification or humidification and automatic temperature exhaust or heating occasions2. Suitable for automatic heating and dehumidification of outdoor terminal box and distribution box, preventing all kinds of malfunctioning accidents caused by creepage between terminals3. Suitable for automatic heating and dehumidification of indoor high-voltage power distribution equipment and high-voltage switch operating mechanism, automatic heating in low-temperature environments to prevent switch malfunction caused by insulation creepage and mechanism failure in low-temperature environments4. Apply to the switching mechanism box, trolley type switchgear, medium-set cabinet, box transformer and other equipment in the box for a number of parts of the moisture-proof, low-temperature on-line monitoringFeatures:1. Real-time display of temperature and humidity, optional modules can realize the temperature and humidity transmission output and RS485 communication function2. Using high-performance, high-precision, corrosion-resistant, long-life digital temperature and humidity sensors, wide measurement range, good linearity, can work reliably for a long time in a variety of environments3. Sensor with 4 wires for temperature and humidity signal transmission, the distance between the sensor and the instrument can be within 30mSpecification: Package Weight One Package Weight 0.31kgs / 0.69lb One Package Size 11cm * 11cm * 9cm / 4.33inch * 4.33inch * 3.54inch Qty per Carton 45 Carton Weight 13.50kgs / 29.76lb Carton Size 47cm * 35cm * 35cm / 18.5inch * 13.78inch * 13.78inch Loading Container 20GP: 463 cartons * 45 pcs = 20835 pcs 40HQ: 1075 cartons * 45 pcs = 48375 pcs

    17.309 Ft

  • TBD0604599501B.jpg@9fc5644617416088616bee9bb13dca75

    Mini Waterproof Handheld Metal Positioning Rod Detector(Black)

    1. Material: ABS2. Convenient design of lanyard to improve efficiency3. Comes with matching leather case, easy to take and take when testing, easy to carry4. Convenient holster helps secure this detector to any standard size belt5. Equipped with sensitivity adjustment button, suitable for different detection needs6. Long press the power button to switch alarm modes: sound, vibration, sound + vibration7. Using 9V battery, long-lasting battery life without frequent battery replacement (battery not included)8. Weight: 175g9. Overall dimensions: 255x40x15mmPacking list:- Metal positioning rod x 1- Anti-lost spring rope x 1- Leather case x 1- English manual x 1Specification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 28cm * 6cm * 6cm / 11.02inch * 2.36inch * 2.36inch Qty per Carton 30 Carton Weight 8.60kgs / 18.96lb Carton Size 30cm * 38cm * 32cm / 11.81inch * 14.96inch * 12.6inch Loading Container 20GP: 730 cartons * 30 pcs = 21900 pcs 40HQ: 1696 cartons * 30 pcs = 50880 pcs

    11.221 Ft

  • TBD06046011.jpg@66f5ffef553a6a106e0cc99b7bb333b4

    SINOTIMER MH0348 Intelligent High Precision Temperature Humidity Controller Digital Display Temperature And Humidity Meter

    1. Operating power: AC220V, 50HZ2. Power consumption: less than 2W3. Resolution: 0.14. Temperature range: -40.0-80 degrees Celsius5. Humidity range: 0-99.9%6. Basic error: temperature: less than 0.5% FS; humidity: less than 4.5% FS7. Display device: LED8. Control output: AC250V 3A (resistive load) 9. Operating environment: -10 - 50 degrees Celsius, 45-85% RH10. External size: about 4.8 x 4.8 x 8.5cm11. Hole size: approx. 4.5 x 4.5cmMain Uses:1. Suitable for bakehouse, grain storage, warehouse, machine room, breeding, textile industry and other need for automatic dehumidification or humidification and automatic exhaust temperature or heating occasions2. Suitable for automatic heating and dehumidification of outdoor terminal box and distribution box, preventing all kinds of malfunctioning accidents caused by creepage between terminals3. Suitable for automatic heating and dehumidification of indoor high-voltage power distribution equipment and high-voltage switch operating mechanism, automatic heating in low-temperature environments to prevent switch malfunction caused by insulation creepage and mechanism failure in low-temperature environments4. Apply to the switching mechanism box, trolley type switchgear, medium-set cabinet, box transformer and other equipment in the box for a number of parts of the moisture-proof, low-temperature on-line monitoringFeatures:1. Real-time display of temperature and humidity, optional modules can realize the temperature and humidity transmission output and RS485 communication function2. Using high-performance, high-precision, corrosion-resistant, long-life digital temperature and humidity sensors, wide measurement range, good linearity, can work reliably for a long time in a variety of environments3. 4 wires for temperature and humidity signal transmission, the distance between the sensor and the instrument can be within 30mSpecification: Package Weight One Package Weight 0.26kgs / 0.58lb One Package Size 11cm * 11cm * 9cm / 4.33inch * 4.33inch * 3.54inch Qty per Carton 45 Carton Weight 12.50kgs / 27.56lb Carton Size 47cm * 35cm * 35cm / 18.5inch * 13.78inch * 13.78inch Loading Container 20GP: 463 cartons * 45 pcs = 20835 pcs 40HQ: 1075 cartons * 45 pcs = 48375 pcs

    17.157 Ft

  • TBD06046010.jpg@af76a06bca3329fd419b17b0d2811fd5

    Handheld Metal Detector Examination Room Mobile Phone Security Detector

    1. Mainly used for school and factory security inspections where sensitivity requirements are not high.2. When detecting and scanning metal, an alarm sound and vibration prompt will be emitted, and the power supply will have a low voltage indication.3. Simple operation, easy to save, low failure rate4. The sensitivity can easily detect a metal object the size of a pin (or even smaller). The sensitivity can be adjusted according to on-site requirements.5. It has simultaneous sound (or vibration) and light alarm functions when metal is detected.6. Use battery and can be connected to an external charger (charger optional)7. Detection sensitivity: detects RMB one-yuan coins, the detection distance is 5cm8. Power supply: 9V square battery (6F22ND battery) Note: not included9. Working current: sound and light less than 56mA, vibration less than 90mA10. Overall dimensions: 35x14x3 cm11. Net weight: 185gSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 37cm * 15cm * 5cm / 14.57inch * 5.91inch * 1.97inch Qty per Carton 20 Carton Weight 6.80kgs / 14.99lb Carton Size 48cm * 32cm * 47cm / 18.9inch * 12.6inch * 18.5inch Loading Container 20GP: 369 cartons * 20 pcs = 7380 pcs 40HQ: 857 cartons * 20 pcs = 17140 pcs

    5.219 Ft

  • TBD06046043.jpg@97422ff45a7777b81fdd64b063a64323

    SINOTIMER XY507 Smart Temperature Control Instrument Short Shell PID Heating Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measuring accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 100-240V 50/60Hz8. Working environment: 0-50 degrees Celsius, 35%-85% RH9. Output: relay/ SSR10. Overall size: about 7.2 x 7.2 x 7.8cmFeatures:1. Dual display, set temperature and process temperature, mainly for heating and cooling control2. Auto-set function can find the best PID setting automatically, very convenient3. Universal inputs, support 10 different types of thermocouple and RTD inputs provided on the panel4. Used for temperature control of oven, dryer, oven, incubator, can be widely used for display and control of temperature, pressure, flow rate, liquid level setting5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.20kgs / 0.45lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 70 Carton Weight 15.00kgs / 33.07lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 70 pcs = 34300 pcs 40HQ: 1137 cartons * 70 pcs = 79590 pcs

    9.736 Ft

  • TBD06046018.jpg@4fc465b1bed4c31e9f130d4031e7a223

    SINOTIMER MC101 Universal Input Short Case PID Intelligent Temperature Controller Meter Heating Cooling Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measurement accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 85-265V 50/60Hz8. Hole size: about 4.5 x 4.5cm9. Overall Dimensions: about 4.8 x 4.8 x 8.5cmFeatures:1. Universal input, can change the input signal at will2. Fahrenheit or Celsius temperature can be switched as required3. 1 set of control outputs (relay/SSR integrated), free to use relay outputs or SSR outputs4. Thermometer signal input, with decimal point digital display5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.16kgs / 0.35lb One Package Size 5cm * 6cm * 10cm / 1.97inch * 2.36inch * 3.94inch Qty per Carton 160 Carton Weight 26.50kgs / 58.42lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 160 pcs = 72000 pcs 40HQ: 1045 cartons * 160 pcs = 167200 pcs

    8.903 Ft

  • TBD06046026.jpg@afbacdf7d852e9639931def92744cc7f

    SINOTIMER MC701 Universal Input Short Case PID Intelligent Temperature Controller Meter Heating Cooling Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measurement accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 100-240V 50/60Hz8. Operating environment: 0-50 degrees Celsius, 35%-85% RH9. Opening size: about 6.8 x 6.8cm10. Overall size: about 7.2 x 7.2 x 8.5cmFeatures:1. Universal input, can change the input signal at will2. Fahrenheit or Celsius temperature can be switched as required3. 1 set of control outputs (relay/SSR integrated), free to use relay outputs or SSR outputs4. Thermometer signal input, with decimal point digital display5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.22kgs / 0.49lb One Package Size 8cm * 8cm * 10cm / 3.15inch * 3.15inch * 3.94inch Qty per Carton 70 Carton Weight 16.50kgs / 36.38lb Carton Size 50cm * 34cm * 32cm / 19.69inch * 13.39inch * 12.6inch Loading Container 20GP: 490 cartons * 70 pcs = 34300 pcs 40HQ: 1137 cartons * 70 pcs = 79590 pcs

    9.348 Ft

  • TBD06046024.jpg@f4a0b8b0cba26e0b5a59ee1bf5ace365

    SINOTIMER MC401 Universal Input Short Case PID Intelligent Temperature Controller Meter Heating Cooling Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measurement accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. power input: AC 100-240V 50/60Hz8. Operating environment: 0-50 degrees Celsius, 35%-85% RH9. Opening size: about 4.5 x 9.2cm10. Overall size: about 4.8 x 9.6 x 8.5cmFeatures:1. Universal input, can change the input signal at will2. Fahrenheit or Celsius temperature can be switched as required3. 1 set of control outputs (relay/SSR integrated), free to use relay outputs or SSR outputs4. Thermometer signal input, with decimal point digital display5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.21kgs / 0.47lb One Package Size 6cm * 10cm * 10cm / 2.36inch * 3.94inch * 3.94inch Qty per Carton 70 Carton Weight 15.50kgs / 34.17lb Carton Size 50cm * 3cm * 32cm / 19.69inch * 1.18inch * 12.6inch Loading Container 20GP: 5555 cartons * 70 pcs = 388850 pcs 40HQ: 12896 cartons * 70 pcs = 902720 pcs

    9.276 Ft

  • TBD06046038.jpg@4ef2c9b1b62905034d7c81c210273662

    SINOTIMER XY501 Short Shell Intelligent PID Temperature Control Instrument Heating Refrigeration Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measuring accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 100-240V 50/60Hz8. Working environment: 0-50 degrees Celsius, 35%-85% RH9. Output: Relay/ SSR10. Overall size: about 4.8 x 4.8 x 7.8cmFeatures:1. Dual display, set temperature and process temperature, mainly for heating and cooling control2. Auto-set function can find the best PID setting automatically, very convenient3. Universal inputs, support 10 different types of thermocouple and RTD inputs provided on the panel4. Used for temperature control of oven, dryer, oven, incubator, can be widely used for display and control of temperature, pressure, flow rate, liquid level setting5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 6cm * 5cm * 10cm / 2.36inch * 1.97inch * 3.94inch Qty per Carton 160 Carton Weight 26.50kgs / 58.42lb Carton Size 50cm * 37cm * 32cm / 19.69inch * 14.57inch * 12.6inch Loading Container 20GP: 450 cartons * 160 pcs = 72000 pcs 40HQ: 1045 cartons * 160 pcs = 167200 pcs

    8.917 Ft

  • TBD0604606401B.jpg@19238a8d1dfe8c383a13fcffd021b364

    SINOTIMER ST16A Round 22mm LED Digital Signal Light 220V AC Ammeter 0-100A AC Current Indicator Light(03 Blue)

    1. Easy to install, simple to use, no complicated steps2. Energy saving and environmental protection, stable performance3. Measuring range: 0-100A4. Supply voltage: 220V5. Accuracy: +/- 2%6. Opening size: 22mm7. Overall size: about 2.8 x 5.1 x 2cmSpecification: Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 8cm * 4cm * 4cm / 3.15inch * 1.57inch * 1.57inch Qty per Carton 430 Carton Weight 22.50kgs / 49.60lb Carton Size 50cm * 38cm * 34cm / 19.69inch * 14.96inch * 13.39inch Loading Container 20GP: 412 cartons * 430 pcs = 177160 pcs 40HQ: 958 cartons * 430 pcs = 411940 pcs

    3.238 Ft

  • TBD06046040.jpg@1eb5994dbc52344ddca0b98254776ed2

    SINOTIMER XY504 Smart Temperature Control Instrument Short Case PID Heating Refrigeration Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measuring accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 100-240V 50/60Hz8. Working environment: 0-50 degrees Celsius, 35%-85% RH9. Output: relay/ SSR10. Overall size: about 4.8 x 9.6 x 7.8cmFeatures:1. Dual display, set temperature and process temperature, mainly for heating and cooling control2. Auto-set function can find the best PID setting automatically, very convenient3. Universal inputs, support 10 different types of thermocouple and RTD inputs provided on the panel4. Used for temperature control of oven, dryer, oven, incubator, can be widely used for display and control of temperature, pressure, flow rate, liquid level setting5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 11cm * 10cm * 6cm / 4.33inch * 3.94inch * 2.36inch Qty per Carton 70 Carton Weight 13.50kgs / 29.76lb Carton Size 50cm * 35cm * 32cm / 19.69inch * 13.78inch * 12.6inch Loading Container 20GP: 476 cartons * 70 pcs = 33320 pcs 40HQ: 1105 cartons * 70 pcs = 77350 pcs

    9.736 Ft

  • TBD06046044.jpg@0468285a7861006d16cf1184758d914c

    SINOTIMER XY509 Smart Temperature Control Instrument Short Case PID Heating Relay SSR Solid State Output

    1. Measuring range: 0-1300 degrees Celsius2. Measuring accuracy: 0.5%FS3. Display mode: LED4. Input: universal input, K/E/J/N/S/T/R/B/Pt100 and other signals, can be changed by yourself5. Resolution: 0.16. Temperature display: degrees Fahrenheit / degrees Celsius7. Power input: AC 100-240V 50/60Hz8. Working environment: 0-50 degrees Celsius, 35%-85% RH9. Output: relay/ SSR10. Overall size: about 9.6 x 9.6 x 7.8cmFeatures:1. Dual display, set temperature and process temperature, mainly for heating and cooling control2. Auto-set function can find the best PID setting automatically, very convenient3. Universal inputs, support 10 different types of thermocouple and RTD inputs provided on the panel4. Used for temperature control of oven, dryer, oven, incubator, can be widely used for display and control of temperature, pressure, flow rate, liquid level setting5. Using anti-interference chip, liquid crystal display, simple and clearSpecification: Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 11cm * 12cm * 10cm / 4.33inch * 4.72inch * 3.94inch Qty per Carton 36 Carton Weight 10.00kgs / 22.05lb Carton Size 50cm * 35cm * 32cm / 19.69inch * 13.78inch * 12.6inch Loading Container 20GP: 476 cartons * 36 pcs = 17136 pcs 40HQ: 1105 cartons * 36 pcs = 39780 pcs

    9.736 Ft

Login

Forgot your password?

Don't have an account yet?
Create account