Products

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Professional Mixer Audio: XTUGA MB1404FX channel audio mixer has 12 MONO+ 2 stereo inputs, 4 group outputs and 3 AUX outputs. Each channel has a +48V phantom power selection, allowing the mixer to be used with both condenser and wired microphones. 2. Mono/Stereo Channel Equalizer: Each channel has 4-band EQ design (High, Mid-High, Mid-Low, Low), high-resolution stereo level, with 12 LED lights. Built-in dual 9-segment balanced overall volume adjustment, you can adjust the volume more delicately, which is very suitable for professional singers who have high requirements for sound. 3. Built-in 99 kinds of DSP effect processors: Built-in 99 kinds of high-quality DSP effects, CD/mobile phone multi-input source matrix. You can switch to the corresponding DSP effect for more different scenes, this incredibly versatile mixer is very suitable for high-quality stage performances, live performances and parties. 4.Multi-format playback support: With Bluetooth playback function, it can be connected to mobile phones, tablets, etc. The mixer can wirelessly transmit music tracks from iOS and Android smartphones, with digital display MP3 (U disk MP3 input), MP3 with recording function, you can record your favorite songs to USB flash memory through the mixer driver. 5. Other Features: Each channel is equipped with a mute switch and pad keys. A separate Solo key lets your monitor headphones hear the sound without any distractions.Specifications1. 99 DSP aux sound card 7 band balance, EQ 60mm fader 2. 48V phantom power supply 3. Bluetooth 4. Support USB/computer 5. 8 inputs 6. Independent mute key 7. MP3 independent control 8. 14 XLR male/6.35 input

Read more less

Features1. Reduces Noise Interference: The noise isolation stand has three layers that work in tandem to reduce noise while recording. It particularly relies on reflectors with a triangular high density thickened sponge insulator material which reduces the propagation of interference sound waves and creates good recording conditions that result in sublime recordings. 2. Flexibility And Convenience: There is lots of flexibility working with the microphone isolation shield with a stand as you can choose to use the 3-panel design foldable end panels. It is easy to adjust the arch design, enables angle adjustments for optimal sound insulation and meets the recording needs of the environment hence ensures only the high quality recordings. 3. Super Noise Reduction Design: This one is designed to block all sound interpretations with its compact design.It is a full package design, with a foldable top to efficiently cancel out noise interference from the environment for a noiseless,multi-layer noise cancellation structure. It reduces noise on the back and side to ensure cleaner and clearer recordings.The reflection area and the absorption area reduce noise generated by the external environments. 4. Easy to Use: The microphone isolation cover is designed for easy usage as it can be disassembled separately and installed according to the recording environment.You can fox it on a desktop or microphone stand. It is suitable for use with multiple stands making it suitable for your current needs.You can adjust the height of the recording shield to fit the preferences of the personal preferences. This one are suitable for professional or vocal recordings and podcast recording studios. 5. High-quality Material: Constructed from high-quality material for sturdiness and long-lasting performance. They can be used with multiple stands or microphones, you can use them on a flat surface and can be fitted on countertops and desktops. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Reduces Noise Interference: The noise isolation stand has 3 layers that work in tandem to reduce noise while recording. It particularly relies on reflectors with a triangular high density thickened sponge insulator material which reduces the propagation of interference sound waves and creates good recording conditions that result in sublime recordings. 2. Flexibility And Convenience: There is lots of flexibility working with the microphone isolation shield with a stand as you can choose to use the 5-panel design foldable end panels. It is easy to adjust the arch design, enables angle adjustments for optimal sound insulation and meets the recording needs of the environment hence ensures only the high quality recordings. 3. Super Noise Reduction Design: This one is designed to block all sound interpretations with its compact design.It is a full package design, with a foldable top to efficiently cancel out noise interference from the environment for a noiseless,multi-layer noise cancellation structure. It reduces noise on the back and side to ensure cleaner and clearer recordings.The reflection area and the absorption area reduce noise generated by the external environments. 4. Easy to Use: The microphone isolation cover is designed for easy usage as it can be disassembled separately and installed according to the recording environment.You can fox it on a desktop or microphone stand. It is suitable for use with multiple stands making it suitable for your current needs.You can adjust the height of the recording shield to fit the preferences of the personal preferences. This one are suitable for professional or vocal recordings and podcast recording studios. 5. High-quality Material: Constructed from high-quality material for sturdiness and long-lasting performance. They can be used with multiple stands or microphones, you can use them on a flat surface and can be fitted on countertops and desktops. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

About The Protuct1. Wireless microphone system with powerful and stable signals, using 2. UHF frequency band, With 16 selectable channels in the 519-551MHz frequency range,for interference-free operation, wireless range up to 50m(164ft). 3. Enhanced headphone monitoring function, allowing you to monitor in real time while shooting 4. Added accompaniment function,transmitter has a AUX input,which acts accompaniment function when used with a mobile phone. 5. Transmitter with LCD display to show battery status, channels, etc. Come with a camera shoe mount, it can be directly fixed to your DSLR camera and other shooting equipment. 6. Receiver with 3.5mm interface, comes with two 3.5mm cable, it can work with your laptop/PC/DSLRFeatures1. XTUGA Professional wireless photographic and recording microphone for photography, video recording, news interview, and classroom lectures and other occasions, with the transmitting distance of 50 meters.Works well with medium and high-end DSLR camera and camcorder etc. 2. UHF frequency response band and interference-free circuit feature strong ant-interference capability;Noise value control system and noise control technology can largely reduce noise and dynamic range. 3. Can be mounted on belt or camera easily; Lightweight which are convenient to carry and wear.Specifications1. Modulation Mode: Digital Frequency Modulate 2. Frequency Range: UHF 520-580MHz 3. Preset Frequency: 30(auto paring) 4. Frequency Response: 75Hz-18kHz +/-3dB 5. Max.Devlation Range: +/-50kHz(with level limiting) 6. T.H.D.: 1.0% 1kHz 7. S/N: 98dB 8. Working Range: Up to 50m 9. RF Carrier Stability: +/-0.005%(-10 degree C -50 degree C) Receiver 1. Power Supply: 3V 2. Power Consumption: 100mA 3. Battery Life: 6 hours Transmitter 1. Carrier Frequency Power: 30mw 2. Working Time: 10 hours 3. FM point: 30 4. Antenna: Flexible 5. Audio input connector: 3.5mm mini jackPackage List1. Transmitter x 2 2. Receiver x 1 3. Monitoring earphone x 1 4. Lavalier Microphone x 2 5. Short Microphone x 2 6. Camera Shoe Mount x 1 7. 3.5mm Cable x 3 8. Bodypack Clips x 3 9. User manual x 1

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

Features1. 24 bit/192 kHz Professional Audio Quality: E22 audio interface, with all connection interfaces for microphone, electric guitar, bass, etc. This includes a +48 volt phantom power supply for condenser microphones,delivers studio-grade 24-bit/192 kHz audio resolution for pristine recording every time.Whether you are a singer, songwriter, producer on the go, or need to accompany during recording, the ultra-reliable E22 audio interface will help you shine in the digital field 2. Simple, Plug and Play: XTUGA E22 USB audio interface for Windows or Mac driver use generic Windows driver. No proprietary driver to download.It has left and right channel input, can be connected to microphones and instruments at the same time for music production, and can be played on the computer at the same time.So you can be going in your home project studio just a few minutes. 3. Compatible with Popular Recording Software: Whether you are a Podcaster or Beat Maker, it will not disappoint. It can ideal match Pro Tools/Ableton Live Lite/Reaper/Ableton and Other DAW Recording Software.NO DAW Software included which means you have flexible choice for you music production. 4. Ideal For Beats: The E22 sound card is small and easy to carry, so you can prepare for various recording and production scenes even on the go. In touring performances, at home, on stage or in rehearsal venues, the E22 sound card provides you with new freedom in recording, editing and mixing, aany audio you record is at studio quality, meaning you will not have to go to a studio to re-record it later. 5. Power Selector: E22 Sound card has diversified power supply. When connected to the tablet, it provides a 5V DC port for power supply. You can insert a standard USB power adapter or an external USB battery to ensure power stability.Specifications1. Connector: Audio Sound Card Adapter 2. Application: Audio equipment, 2 in 2 out 3. Material: Metal+ABS 4. Features: Portable 5. Application: Computer and mobile phone 6. Function: Studio recording 7. Resolution: 192Khz-24Bit

Read more less

1. IEM1100 Bodypack Receiver independent volume adjustment. 2. With power and RF receiving Indicator lamp. 3. It using two AA batteries (not included) and efficient power circuit. 4. Detachable antenna 5. Oscillation mode: PLL synthesized 6. Frequency stability: +/-0.005% 7. Preset Channel: 40channels separately set 4 groups 8. Earphone load impedance: Greater than 16ohms 9. Antenna: detachable antenna

Read more less

Features1. LCD Display shows clear working status 2. Low battery remind of bodypack receivers 3. Receiving range from 80 to 100m, generally within 80 4. Note: Need to be used with host transmitterSpecifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Response: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, make it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF500-830MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, make it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF500-830MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. UHF wireless in-ear monitoring system. 2. A built-in limiter circuit for stage performances and a wide range of sounds eliminates distortion at excessive input levels. 3. Metal panel and body shell, makes it sturdy and durable 4. Provides desktop-level monitoring in an in-ear monitoring and receiving system with a wireless range from 80 to 100m, and a frequency range of 550-580MHz. 5. The signal-to-noise ratio of the dynamic range is improved, so that the system has excellent anti-interference ability, and once again shows the good original soundTransmitter Specifications1. Case specification:Standard 1U Case 2. Material: Metal panel and body housing case 3. Frequency range: UHF550-580MHz 4. Frequency interval: 25MHz 5. Transmit output power:100mW(50 ohms) 6. Audio input: XLR & 6.3mm duplex outlet 7. Earphone output: 6.3mm jack, volume adjustable 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Voltage current consumption: DC 12V 250mA 10. Antenna interface: TNC jack (50 ohms) 11. Size: 48 x 10.5 x 4.3cmReceiver Specifications1. Oscillation mode: PLL synthesized Frequency 2. Width Frequency range: UHF550-580MHz (Corresponding transmitter frequency) 3. Frequency interval: 25MHz 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Comprehensive Frequency Reaponse: 80Hz~15KHz+/-3dB 7. Output power (30 ohms): 2 x 35mW 8. Headphone load impedance: Greater than or equal to 16 ohms 9. Earphone output: 3.5mm jack 10. Power supply: 2 x AA batteries (not included) 11. Size: 8.5 x 6cm

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

Features1. Supercardioid Dynamic Instrument Microphone: This microphone is a high output dynamic microphone with a custom frequency response designed for kick drums and other bass instruments. It offers excellent attack and impact, delivering studio-quality sound even at extremely high SPLs. 2. High Output Design Drum Microphone: The compact microphone is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. Its extremely uniform supercardioid polar pattern provides high gain before feedback and excellent rejection of unwanted noise. 3. Easy installation and connection: The built-in dynamic locking bracket adapter with integrated XLR connector simplifies installation. Each instrument mic is designed with standard thread 3/8" or 5/8" to match all types of mic stands. The stand adapter holds the mic securely in place even if the mic is hit by a drumstick. 4. Adaptable and Wide Range of Applications: Typical microphone applications include close-up miking of toms and other percussion instruments as well as guitar amplifiers, brass and woodwind instruments. All microphones feature standard XLR connectors for compatibility with most audio instruments.Specifications1. Material: Metal; 2. Microphone core: moving coil/capacitor; 3. Directivity: one-way; 4. Microphones include: one bass drum mic; four snare drum mics; two condenser mics with stands; four wire clips; four clips for snare/thru mics;

Read more less

1. Suitable for microhones: The microhone windshield is suitable for most USB microhones, condenser microhones with a jacket diameter between 40-70mm. Comes with a holder for different size microhones. 2. Noise-Canceling: Professional o filter efficiently reduce the losive, wind interference, saliva sraying and reserve you a rofessional clean voice and bright clear recording. 3. 5-sided Noise Reduction + 1-side Double Layered Filters: microhone foam screen o filter adots a 5-sided seal design to effectively reduce noise in different directions. The oening 1-side Double Layered Screen Pop Filters can revent the divergent sound from during the recording rocess, the recetion is more secific, and the recording is clearer and true and rotect your microhone from the corrosion of saliva. 4. Light and Convenient: Mic O-type filters have good noise reduction and acoustic noise reduction strength, it is not only suitable for ersonal live recording but also for rofessional recording studio, radio studio, outdoor erformance, etc. 5. Wide alication: Light ortable design, easy installation; It can be easily mounted on various desktos stand, small triods, cantilever arms and floor stands. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features1. Ultra-compact rack-mountable: 900-Watt 10-Channel Stage Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System. 2. Revolutionary amplifier technology: enormous power, incredible sonic performance. 3. The powerful PMP1680S with 900 -Watt bridged output Support dual 12-inch speakers/single 15-inch speakers. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP1680S can accommodate with ease. 4. Massive Mono or Stunning Stereo:10 mono and 4 stereo channels plus separate CD/Tape input/output.Effective, extremely musical dual 7-band EQ, switchable Pad, and Clip LEDs on all mono channels. 5. Rugged and easy carry design: It is enclosed in a high quality enclosure which can take a real beating. Protable Easy carry design making it versatile enough for most gigs and party.Specifications1. 900W 10-channel mixer with power amplifier 2. 10 mono and 4 stereo channels plus separate CD/tape I/O 3. Dual 99DSP effect, dual 7-band EQ, switchable pad, on all mono channels 4. Support dual 12-inch speakers/single 15-inch speakers

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less