Products

FeaturesThis is a RS485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...SpecificationsOutline: 1. Communication interface: RS485, screw terminal 2. Power supply: 5 ~ 36V DC, screw terminal 3. Case: PC + ABS, V0 flame retardant grade 4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm Comunication: 1. Ethernet: 10 / 100M auto-negotiation RJ45 connector 2. WIFI: 802.11b/g/n compliant 3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) Wireless specification: 1. Frequency Band: 2.412 ~ 2.484 GHz 2. Wireless network: Station / AP / AP+Station Mode 3. Security mechanism: WPA-PSK / WPA2-PSK 4. Encryption type: TKIP / AES 5. Transmitting power: - 802.11b: +19dBm (11Mbps) - 802.11g: +18dBm (54Mbps) - 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) 6. Receiving sensitivity: - 802.11b: -89dBm (11Mbps) - 802.11g: -81dBm (54Mbps) - 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) Serial specification: 1. Baudrate: 300 ~ 460800 bps 2. Parity bit: None, odd, even, mark, space 3. Data bit: 5 ~ 9 bits 4. Flow control: N/A Software 1.Protocol: TCP / UDP / ARP / ICMP / DHCP / DNS / HTTP / MQTT 2. Configuration: Host, web browser, serial AT command 3. Communication method: TCP/IP direct communication, VCOM 4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU Environmental requirements 1. Working temperature: -40 ~ 85 degree C 2. Storage temperature: -45 ~ 125 degree C 3. Humidity range: 5% ~ 95% relative humidityPackage List1. RS485 TO WIFI/ETH x 1 2. Antenna x 1

Read more less

1. Size: 5.5 inches2. Port: HDMI3. Display panel: IPS, 2K resolution4. Touch port: USB5. Support Raspberry Pi operating system, 10-point touch.6. Support Ubuntu / Kali, single touch.7. Only Raspberry Pi 4B and CM4 have enough CPU performance to fully drive this 2K monitor8. When using Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only the default portrait display is supported and cannot be rotated.9. This chassis only supports Raspberry Pi 4B

Read more less

Features1. Raspberry Pi camera, supports all revisions of the Pi2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.2- Focal Length: 8mm- Angle of View (diagonal): 40 degree- Sensor best resolution: 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 31mm x32mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableNote: The actual image pixels is 5MP, which depends on the sensor, so it doesn't matter that there is a 3MP silk mark on the camera.Package Contents1. RPi IR-CUT Camera (B) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1

Read more less

Product Overview1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time. 2. By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.Specification1. PoE standard: 802.3af/at 2. Input voltage: 37-57 V DC, Class 4 device 3. Output voltage/current: 5V DC/4A 4. Current sense: Yes 5. Transformer design: Planar 6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling 7. Fan size: 25 x 25mm 8. Feature: Fully isolated switched-mode power supply 9. Compatible with: Raspberry Pi 3B+/4BPackage List1. Raspberry Pi PoE+ HAT x1 2. Standoffs pack x1

Read more less

1. Using pogo pin connection, the Zero 2W can be easily attached 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. Onboard headphone jack(extended from USB) and an additional speaker header 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive 6. Not compatible with the first generation Zero Package List: 1. Zero-to-Pi3-Adapter (B) x 1 2. HD-MI Adapter x 1

Read more less

1. Zero can be easily attached via specially designed connectors 2. Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards 3. The same GPIO header height as 3B, easily connecting with 3B series HATs or development projects 4. Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission 5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive

Read more less

1. Raspberry Pi Camera, supports only Raspberry Pi Zero V1.3 and Raspberry Pi Zero W2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.51mm- Angle of View (diagonal) : 69.1 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 60mm × 11.5mm × 5mm

Read more less

1. Pixel: 64 x 32=2048 dots2. Pitch: 2.5mm3. Pixel format: 1R1G1B4. Viewing angle: greater than 140 degrees5. Control mode: synchronous6. Drive: 1/16 scan7. Connector: HUB758. Power supply: V / 2.5A (VH4 connector input)9. Power: within 12W10. Size: 16 x 8cmFeatures:1. 2048 independent RGB led, full color display, adjustable brightness2. 64x32 pixels, 2.5mm pitch, allows displaying text, color images or animations 3. 160x80mm size, moderate size, suitable for DIY desktop display or wall mount display4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support5. Provide open source development resources (for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino, etc.)

Read more less

FeaturesBy nightfall, the dazzling neon lights of the streets and alleys illuminate the whole city making it more dynamic. Obviously, the Full-Color LED Matrix Panel is playing an important role. Maybe be on the doors of shops, maybe be on the bus or the taxi, you can always see animations or advertisement videos. Does it look cool? Why not have a try? 1. 4096 individual RGB LEDs, full-color display, adjustable brightness 2. 64 x 64 pixels, 3mm pitch, allows displaying text, colorful image, or animation 3. 192 x 192mm dimensions, moderate size, suitable for DIY desktop display or wall mount display 4. Onboard two HUB75 header, one for controller data input, one for output, chain support 5. Provides open source development resources and tutorials, for use with Raspberry Pi, Arduino, and so onSpecifications1. Dimensions: 192mm x 192mm 2. Pixels: 64 x 64=4096 dots 3. Spacing: 3mm 4. Pixel form: 1R1G1B 5. Viewing angle: greater than or equal to 160 degrees 6. Control Type: Synchronous 7. Driving: 1/32 scan 8. Connector: HUB75 9. Power supply: 5V / 4A (VH4 connector input) 10. Power: less than or equal to 20WPackage List1. RGB-Matrix-P3-64x64 LED matrix and accessories x 1 2. Power supply terminal adapter x 1 3. 16P wire about 30cm x 1

Read more less

Features1. Comes with RM500U-CN core module, supports 5G and LTE-A multi network types, supports 5G NSA and SA networking 2. Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android 3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 4. Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CN / RM500Q-CN / RM500Q-GL series 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 6. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 7. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 8. 2x SIM card slot, dual card single standby, switchable via AT command 9. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. 5G: - 5G NR: 3GPP Release 15 NSA/SA operation, Sub-6 GHz - 5G NR NSA: n41, n78, n79 - 5G NR SA: n1, n28, n41, n77, n78, n79 - Downlink: 4 x 4 MIMO n1, n41, n77, n78, n79 2. LTE: - LTE Category: Downlink Cat 12, uplink Cat 13 - LTE-FDD: B1, B2, B3, B5, B7, B8, B20, B28 - LTE-TDD: B34, B38, B39, B40, B41 - Downlink 2 x 2 MIMO: B1, B2, B3, B5, B7, B8, B20, B28, B34, B38, B39, B40, B41 3. UMTS: WCDMA: B1, B2, B5, B8 Data rate: 1. 5G SA Sub-6: Downlink 2 Gbps; uplink 1 Gbps 2. 5G NSA Sub-6: Downlink 2.2 Gbps; uplink 575 Mbps 3. LTE: Downlink 600 Mbps; uplink 150 Mbps 4. UMTS: Downlink 42.2 Mbps; uplink 11 Mbps Other: 1. Operating temperature: -30 degree C ~ +75 degree C 2. Extension temperature: -40 degree C ~ +85 degree C 3. Module dimensions: 30.0 x 52.0 x 2.3 (mm) 4. Module weight: 8.9 (g)Package List1. M.2 TO 4G/5G HAT x 1 2. RM500U-CN x 1 3. Antenna 4pcs x 1 4. IPEX adapter cable 4pcs x 1 5. 2*20PIN pin header x 1 6. 5V 3A Type-C power adapter x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 4pcs x 1 11. Screws pack x 1

Read more less

1. 5G wireless specifications-5G Sub-6G:SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79-4G:LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48LAA:B46-UMTS: B1, B2, B4, B5, B8, B19-GNSS: GPS / GLONASS / Beidou (Beidou) / Galileo / QZSS (only supported by RM520N-GL)2. Data rate-5G Sub-6G:SA: 2.4 Gbps (DL) / 900 Mbps (UL)NSA: 3.4 Gbps (DL)/550 Mbps (UL)-LTE: 1.6 Gbps (DL)/200 Mbps (UL)-HSPA+ 42 Mbps (DL)/5.76 Mbps (UL)3. WIFI wireless specifications-WiFi standards: IEEE802.11b/g/n, IEEE802.11Wi-Fi 5(a/b/g/n/ac) compatible, 2.4GHz, 5.8GHz, 2T2R, support AP mode-Data rate: 2.4GHz: up to 300Mbps; 5.8GHz: up to 866Mbps-Authentication: Supports WEP, WPA, WPA2 and other encryption methods4. Interface-M.2: 1 connector, comes with 1 RM520N-GL module by default, supports other 5G modules-Mini PCIE: 3 connectors, equipped with 1 2.4GHz and 1 5.8GHz WiFi module, can connect more than 1 4G module-WAN: 1x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection(The WAN RJ45 can be used as a LAN RJ45 port, so there can be a total of 5 LAN RJ45 ports)-LAN: 4x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection-Serial port: 1x RS232 + 1x RS485, built-in ESD protection-SIM/UIM card slot: drawer-type SIM card slot to prevent the SIM card from falling off, with built-in 15KV ESD protection-Antenna interface: SMA standard antenna interface, equipped with 4x 5G antenna and 4x WiFi antenna by default-TF card slot: for external storage-Power supply: standard power interface, providing 12~24V input, embedded power reverse protection and overvoltage protection-RESET button: Press and hold for 5-10 seconds and release to restore the router to factory settings.-Indicators: PWR, SYS, 5G, 4G, WAN, LAN, TF, 2.4G, 5.8G status indicators5. Power supply-Power adapter: DC 12V/2A-Power input range: 12-24V-Power consumption: data mode: less than 1A@12V, idle mode: less than 500mA@l2V6. Physical parameters-Material: metal shell-Protection level: IP30-Operating temperature: -35 to 75 degrees Celsius-Storage temperature: -40 to 85 degrees Celsius-Relative humidity: 95 percent (non-condensing)-Product size: 219 x 117 x 36.8mm-Weight: 919 gramsPacking list:-RM520N-GL 5G Router x 1-5G antenna x 4-WiFi antenna x 4-12V power adapter x 1

Read more less

1. 5G wireless specifications-5G Sub-6G:SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79-4G:LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48LAA:B46-UMTS: B1, B2, B4, B5, B8, B19-GNSS: GPS / GLONASS / Beidou (Beidou) / Galileo / QZSS (only supported by RM520N-GL)2. Data rate-5G Sub-6G:SA: 2.4 Gbps (DL) / 900 Mbps (UL)NSA: 3.4 Gbps (DL)/550 Mbps (UL)-LTE: 1.6 Gbps (DL)/200 Mbps (UL)-HSPA+ 42 Mbps (DL)/5.76 Mbps (UL)3. WIFI wireless specifications-WiFi standards: IEEE802.11b/g/n, IEEE802.11Wi-Fi 5(a/b/g/n/ac) compatible, 2.4GHz, 5.8GHz, 2T2R, support AP mode-Data rate: 2.4GHz: up to 300Mbps; 5.8GHz: up to 866Mbps-Authentication: Supports WEP, WPA, WPA2 and other encryption methods4. Interface-M.2: 1 connector, comes with 1 RM520N-GL module by default, supports other 5G modules-Mini PCIE: 3 connectors, equipped with 1 2.4GHz and 1 5.8GHz WiFi module, can connect more than 1 4G module-WAN: 1x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection(The WAN RJ45 can be used as a LAN RJ45 port, so there can be a total of 5 LAN RJ45 ports)-LAN: 4x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection-Serial port: 1x RS232 + 1x RS485, built-in ESD protection-SIM/UIM card slot: drawer-type SIM card slot to prevent the SIM card from falling off, with built-in 15KV ESD protection-Antenna interface: SMA standard antenna interface, equipped with 4x 5G antenna and 4x WiFi antenna by default-TF card slot: for external storage-Power supply: standard power interface, providing 12~24V input, embedded power reverse protection and overvoltage protection-RESET button: Press and hold for 5-10 seconds and release to restore the router to factory settings.-Indicators: PWR, SYS, 5G, 4G, WAN, LAN, TF, 2.4G, 5.8G status indicators5. Power supply-Power adapter: DC 12V/2A-Power input range: 12-24V-Power consumption: data mode: less than 1A@12V, idle mode: less than 500mA@l2V6. Physical parameters-Material: metal shell-Protection level: IP30-Operating temperature: -35 to 75 degrees Celsius-Storage temperature: -40 to 85 degrees Celsius-Relative humidity: 95 percent (non-condensing)-Product size: 219 x 117 x 36.8mm-Weight: 919 gramsPacking list:-RM520N-GL 5G Router x 1-5G antenna x 4-WiFi antenna x 4-12V power adapter x 1

Read more less

1. 5G wireless specifications-5G Sub-6G:SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79NSA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79-4G:LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48LAA:B46-UMTS: B1, B2, B4, B5, B8, B19-GNSS: GPS / GLONASS / Beidou (Beidou) / Galileo / QZSS (only supported by RM520N-GL)2. Data rate-5G Sub-6G:SA: 2.4 Gbps (DL) / 900 Mbps (UL)NSA: 3.4 Gbps (DL)/550 Mbps (UL)-LTE: 1.6 Gbps (DL)/200 Mbps (UL)-HSPA+ 42 Mbps (DL)/5.76 Mbps (UL)3. WIFI wireless specifications-WiFi standards: IEEE802.11b/g/n, IEEE802.11Wi-Fi 5(a/b/g/n/ac) compatible, 2.4GHz, 5.8GHz, 2T2R, support AP mode-Data rate: 2.4GHz: up to 300Mbps; 5.8GHz: up to 866Mbps-Authentication: Supports WEP, WPA, WPA2 and other encryption methods4. Interface-M.2: 1 connector, comes with 1 RM520N-GL module by default, supports other 5G modules-Mini PCIE: 3 connectors, equipped with 1 2.4GHz and 1 5.8GHz WiFi module, can connect more than 1 4G module-WAN: 1x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection(The WAN RJ45 can be used as a LAN RJ45 port, so there can be a total of 5 LAN RJ45 ports)-LAN: 4x 10/100/1000M Ethernet, auto-negotiation MDI/MDIX, built-in 1.5KV electromagnetic isolation protection-Serial port: 1x RS232 + 1x RS485, built-in ESD protection-SIM/UIM card slot: drawer-type SIM card slot to prevent the SIM card from falling off, with built-in 15KV ESD protection-Antenna interface: SMA standard antenna interface, equipped with 4x 5G antenna and 4x WiFi antenna by default-TF card slot: for external storage-Power supply: standard power interface, providing 12~24V input, embedded power reverse protection and overvoltage protection-RESET button: Press and hold for 5-10 seconds and release to restore the router to factory settings.-Indicators: PWR, SYS, 5G, 4G, WAN, LAN, TF, 2.4G, 5.8G status indicators5. Power supply-Power adapter: DC 12V/2A-Power input range: 12-24V-Power consumption: data mode: less than 1A@12V, idle mode: less than 500mA@l2V6. Physical parameters-Material: metal shell-Protection level: IP30-Operating temperature: -35 to 75 degrees Celsius-Storage temperature: -40 to 85 degrees Celsius-Relative humidity: 95 percent (non-condensing)-Product size: 219 x 117 x 36.8mm-Weight: 919 gramsPacking list:-RM520N-GL 5G Router x 1-5G antenna x 4-WiFi antenna x 4-12V power adapter x 1

Read more less

OverviewDetects clockwise/anti-clockwise rotations: degrees and lapsSpecifications1. Pulses per lap: 152. Power: 3.0V ~ 5.3V3. Dimension: 32.1mm * 15.4mm4. Mounting holes size: 2.0mmApplicationsPositioning in Industrial ControlsHow to UseIn the case of working with a MCU:1. VCC -- 3.0V ~ 5.3V2. GND -- Power supply ground3. SW -- MCU.IO (encoder button status)4. SIB -- MCU.IO (output status)5. SIA -- MCU.IO (output status)

Read more less

FeaturesBased on a high performance Cortex processor, combined with high-security commercial fingerprinting algorithm, the UART Fingerprint Sensor (D) features functionalities like fingerprint enrolling, image acquisition, feature finding, template generating and storing, fingerprint matching, and so on. Without any knowledge about the complicate fingerprinting algorithm, all you need to do is just sending some UART commands, to quickly integrate it into fingerprint verification applications which require small size and high precision. 1. Easy to use by some simple commands, you do not have to know any fingerprint technology, or the module inter structure 2. Commercial fingerprinting algorithm, supports functions like fingerprint enrolling, fingerprint matching, fingerprint image acquisition, and fingerprint feature uploading, stable performance, fast identification 3. Capacitive sensitive detection, just touch the collecting window lightly for fast verification 4. Highly integrated hardware, processor and sensor in one small chip, suitable for small size applications 5. Narrow stainless steel rim, supports 360 degree omni-directional verification 6. Embedded human sensor, the processor will enter sleep automatically, and wake up when touching, lower power consumption 7. Onboard UART connector, easy to connect with hardware platforms like STM32 and Raspberry Pi1.Specifications1. Sensor: Capacitive touch sensor 2. Resolution: 508 DPI 3. Image pixels: 160 x 160 4. Image greyscale: 8 5. Sensor dimension: R15.5 mm 6. Fingerprint capacity: 150 7. Matching time: Less than 500ms (1:N, and N Less than or equal 100) 8. False acceptance rate: Less than 0.001% 9. False rejection rate: Less than 0.1% 10. Operating voltage: 2.7~3.3V 11. Operating current: Less than 50mA 12. Sleep current: Less than 16uA 13. ESD: Contact discharge 8KV / aerial discharge 15KV 14. Communication port: UART 15. Baudrate: 19200 bps 16. Operating environment temperature: -20 degree C~70 degree C; Humidity: 40%RH~85%RH (no condensation) 17. Storage environment temperature: -40 degree C~85 degree C; Humidity: Less than 85%RH (no condensation)

Read more less

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display 6. Lithium battery recharge/discharge header, suitable for mobile devices 7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) 9. USB 1.1 with device and host support 10. Low-power sleep and dormant modes 11. Drag-and-drop programming using mass storage over USB 13. 26 x multi-function GPIO pins 14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 15. Accurate clock and timer on-chip 16. Temperature sensor 17. Accelerated floating-point libraries on-chip 18. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Read more less

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Read more less

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now. As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins. What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 x multi-function GPIO pins 12. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Read more less

1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 2MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Castellated module allows soldering direct to carrier boards 6. USB 1.1 with device and host support 7. Low-power sleep and dormant modes 8. Drag-and-drop programming using mass storage over USB 9. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points) 10. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels 11. Accurate clock and timer on-chip 12. Temperature sensor 13. Accelerated floating-point libraries on-chip 14. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Read more less

Features1. Raspberry Pi Camera, compatible with the original one, supports all revisions of the Pi2. 5 megapixel OV5647 sensor in a fixed-focus module3. Camera specifications- CCD size : 1/4 inch- Aperture (F) : 2.8- Focal Length : 3.4 mm- Angle of View (diagonal) : 66 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p 30fps, 720p 60fps and 640x480p 60/90fps video record6. Dimension: 25mm x 24mm x 9mmPackage Contents1. RPi Camera (D) x12. 15-pin FFC (opposite sides contact) x1Note: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Night Vision Camera, supports all revisions of the Pi2. 5 megapixel OV5647 sensor3. Adjustable focus distance4. Camera specifications- CCD size: 1/4inch- Aperture (F): 1.8- Focal Length: 3.6mm- Angle of View (diagonal) : 75 degree- Sensor best resolution : 1080p5. 4 screw holes- Used for attachment- Provide 3.3V power output- Support connecting infrared LED and/or fill flash LED6. Dimension : 25mm x 24mmPackage Contents1. RPi Camera (F) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras 5.5are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (G) x12. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (H) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 1.8- Focal Length : 1.55mm- Angle of View (diagonal) : 170 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p6. 2592 x 1944 still picture resolution7. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record8. Dimension: 32mm x32mmPackage Contents1. RPi Camera (I) x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Focal Length : 0.87mm- Angle of View (diagonal) : 200 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. 2592 × 1944 still picture resolution8. Support 1080p30fps , 720p60fps and 640x480p60/90fps video record9. Dimension: 25mm x 24mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CablePackage Contents1. RPi Camera (M) x12. 15-pin FFC (opposite sides contact) x1

Read more less

1. Raspberry Pi Camera, supports Raspberry Pi A+/B+/2B/3B/3B+2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.37mm- Angle of View (diagonal) : 72 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 300mm × 16mm × 5mm

Read more less

Features1. Raspberry Pi Camera, supports all revisions of Pi2. Embedded detachable IR-CUT filter to eliminate color distortion in daylight3. Equipped with infrared LED to support night vision4. 5 million pixel OV5647 sensor5. Adjustable focal length6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.8- Focal length: 3.6mm- Viewing angle (diagonal): 75.7 degrees- Sensor best resolution: 1080p7. 4 screw holes- for accessories- Provide 3.3V power output- Support for connecting infrared LEDs and / or fill flash LEDs8. Size: 31mm × 32mmNote: To use the camera on Raspberry Pi Zero / Zero W / Zero WH, you need to purchase a specific line: Raspberry Pi Zero v1.3 camera linePackage Contents1. RPi IR-CUT camera x12. Infrared LED board (B) x23. 15-pin FFC (relative side contact) x1

Read more less

Raspberry Pi Expansion Board, DC Motor / Stepper Motor DriverFeatures1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. Freescale H-bridge driver MC33886, controls DC motors to turn in both directions3. Onboard 5V regulator, provides power to Raspberry Pi4. Onboard IR receiver, used for remote control robot5. Multi protection circuit, excellent stability- 2A self-recovery fuse, keep your Pi safe- Driver chip features Short-Circuit Shutdown for Large Output Current, Undervoltage Disable Function- Reversed polarity protection for motor output- Anti-reverse diode for power supply6. Power input range: 7V~40V7. Single motor output current: up to 5A8. Power supply current for Raspberry Pi: up to 2AWhat's on Board1. Raspberry Pi Expansion Board on board resource2. Raspberry Pi GPIO interface: for connecting Raspberry Pi3. Motor screw terminal: for connecting motors4. External power input5. 74LVC4245AD: voltage level conversion chip, buffer device6. MC33886: motor driver chip7. LM2596-5.0: 5V regulator8. Power indicator9. Raspberry Pi power selection10. OFF: Raspberry Pi powers the Motor Driver Board11. ON: Motor Driver Board powers the Raspberry Pi12. 2A self-recovery fuse13. IR receiver14. Schottky diodes: protects the motor driver15. Power supply anti-reverse diodePackage Contents1. RPi Motor Driver Board x 12. RPi screws pack (2pcs) x 1

Read more less

OverviewThe RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent.RPi Relay Board Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Onboard LEDs for indicating relays status5. Relay control jumper, allows to control the relays by custom pins other than the default pins6. Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835What is on the RPi Relay Board1. Raspberry Pi GPIO interface: for connecting Raspberry Pi2. Relay screw terminal: for connecting target devices3. Relays4. Photocoupler: PC8175. Relay indicator- LED on: relay NC is opened, NO is closed- LED off: relay NC is closed, NO is opened6. Power indicator7. Relay control jumper- Short the jumper: control the relays by default I/Os used in the example code- Open the jumper: control the relays by custom I/Os through jumper wiresPackage include- RPi Relay Board x 1- RPi screws pack (2pcs) x 1

Read more less

Features:1. A dual serial port device data collector/IoT gateway designed for industrial environments. One RS232 and one RS485 can work simultaneously using one network cable without interfering with each other.2. It integrates multiple functions, including serial port server, Modbus gateway, MQTT gateway, RS232 and RS485 to JSON, etc.3. The other Ethernet port can be used as a network switch or cascade, and the PoE function can be equipped with dual power supply.4. The Ethernet port provides two power supply methods: DC port (outer diameter 5.5mm, inner diameter 2.1mm) and screw terminal.5. The chassis adopts guide rail support, which is small in size, easy to install and cost-effective. 6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.7. This product is a PoE receiving device (PD) and needs to be connected to a PoE power supply and obtain power from the PSE device to work properly.Product parameters:1. Product type: serial server, Modbus gateway, MQTT gateway2. Basic functions: two-way transparent transmission of data between RS232, RS485 and Ethernet3. Communication interface: RS232 port × 1, RS485 port × 1, Ethernet port × 24. Power supply:TO ETH (B): DC 5.5 power interface, 6~45V DC screw terminalTO POE ETH (B): DC 5.5 power interface, 6~45V DC screw terminal, or PoE interface5. Isolation protection: power isolation, signal isolation6. Ethernet:TO ETH (B)：RJ45TO POE ETH (B): RJ45 with PoE support, IEEE 802.3af compliant10/100M self-negotiating RJ45 connector, 2KV surge protection7. Serial port: Isolated RS232 and RS485 (2 channels can receive and send independently at the same time)8. Baud rate: 300-115200 bps9. Check digit: none, odd, even, mark, space10. Data bits: 5-9 bits11. Flow control: Not applicable12. Protocol: Ethernet, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS13. Configuration: host, browser, device management function library14. Communication method: TCP/IP direct communication, VCOM15. Working mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP multicast16. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius17. Humidity range: 5%-95% relative humidity18. Product size: 78 x 72.5 x 24.2mm19. Weight: 134 grams

Read more less

Features:1. A dual serial port device data collector/IoT gateway designed for industrial environments. One RS232 and one RS485 can work simultaneously using one network cable without interfering with each other.2. It integrates multiple functions, including serial port server, Modbus gateway, MQTT gateway, RS232 and RS485 to JSON, etc.3. The other Ethernet port can be used as a network switch or cascade, and the PoE function can be equipped with dual power supply.4. The Ethernet port provides two power supply methods: DC port (outer diameter 5.5mm, inner diameter 2.1mm) and screw terminal.5. The chassis adopts guide rail support, which is small in size, easy to install and cost-effective. 6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.7. This product is a PoE receiving device (PD) and needs to be connected to a PoE power supply and obtain power from the PSE device to work properly.Product parameters:1. Product type: serial server, Modbus gateway, MQTT gateway2. Basic functions: two-way transparent transmission of data between RS232, RS485 and Ethernet3. Communication interface: RS232 port × 1, RS485 port × 1, Ethernet port × 24. Power supply:TO ETH (B): DC 5.5 power interface, 6~45V DC screw terminalTO POE ETH (B): DC 5.5 power interface, 6~45V DC screw terminal, or PoE interface5. Isolation protection: power isolation, signal isolation6. Ethernet:TO ETH (B)：RJ45TO POE ETH (B): RJ45 with PoE support, IEEE 802.3af compliant10/100M self-negotiating RJ45 connector, 2KV surge protection7. Serial port: Isolated RS232 and RS485 (2 channels can receive and send independently at the same time)8. Baud rate: 300-115200 bps9. Check digit: none, odd, even, mark, space10. Data bits: 5-9 bits11. Flow control: Not applicable12. Protocol: Ethernet, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS13. Configuration: host, browser, device management function library14. Communication method: TCP/IP direct communication, VCOM15. Working mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP multicast16. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius17. Humidity range: 5%-95% relative humidity18. Product size: 78 x 72.5 x 24.2mm19. Weight: 134 grams

Read more less

Features1. This is a RS485 device data acquisitor / IoT gateway designed for industrial environment. 2. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc. 3. The module features RS485 and Ethernet ports, uses screw terminals for power input, supports 9~24V wide range power supply. 4. Rail-mount flame-retardant case design, small in size, easy to install. 5. It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring...Specifications1. Communication interface: RS485, screw terminal, supports 32x slave devices 2. Power supply: 9 ~ 24V DC, screw terminal 3. Dimensions (L x W x H): 87 x 36 x 59 mm 4. Ethernet: 10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection 5. Serial port: RS485 ?? 1: RXD, TXD, GND 6. Baudrate: 300 ~ 115200 bps 7. Parity bit: None, odd, even, mark, space 8. Data bit: 5 ~ 9 bits 9. Flow control: N/A 10. Protocol: ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS 11. Configuration: Host, web browser, device management functions library 12. Communication method: TCP/IP direct communication, VCOM 13. Operating mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP multicast 14. Operating temperature: -40 degree C ~ 85 degree C 15. Storage temperature: -45 degree C ~ 165degree C 16. Humidity range: 5% ~ 95% relative humidity

Read more less

1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver 3. Features RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ningproof & anti-electrostatic 5. Onboard digital isolation chip, safer signal isolation communication and better stability and anti-interference 6. Reserved control pins, allows to work with other control boards 7. Comes with development resources and manual (examples in python)Specifications1. CAN Controller: MCP2515 2. CAN transceiver: SIT65HVD230DR 3. RS485 transceiver: SP3485 4. Working voltage: 3.3V 5. Mounting hole size: 3.0mm 6. Dimensions: 100 x 79 mmPackage List1. RS485 CAN for Jetson Nano x1 2. Screws pack x1

Read more less

OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with Arduino UNO, Leonardo, the CAN function is unavailable due to hardware limitation2. RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply3. CAN function, onboard transceiver SN65HVD230, 3.3V power supply

Read more less

RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1

Read more less

1. Interface standard: compliant with RS485 standard2. Physical interface: RS485 wiring terminal3. Communication rate: 300-460800bps baud rate (adaptive)4. Support points: each RS485 interface can support up to 32 nodes5. Communication distance: 1200m (9600bps), the higher the communication rate, the shorter the distance6. Working mode: RS485 two-wire (A, B), half-duplex transparent transmission7. Power supply voltage: DC 9-24V8. Transmission medium: ordinary parallel wire/twisted pair9. Size: about 12.1 x 7.2 x 3cmFeatures:1. 8-way RS485 slave port can be extended by one 485 master port with isolation and relay2. RS485 network relay, extension and isolation functions can be realized3. The isolated RS485 interface at the RS485 master port can be connected to RS485 master control devices, and the extended 8-way isolated RS485 interface can be externally connected to various RS485 slave devices, such as RS485 sensors, etc.4. Built-in optoelectronic isolation protection circuit, RS485 master and slave devices are isolated, which can effectively protect RS485 master and slave devices from the damage of ground potential difference between devices, static electricity, surge, which can be applied to industrial environment with high requirements of reliability and safety5. Wide baud rate range, support 300-460800bps wide baud rate communication range (self-adaptive)6. Support 35mm standard rail with rail clips, easy to install

Read more less

1. MQ-5 Gas Sensor: Sensitive for LPG, natural gas, coal gas, application for gas leakage detector2. Color Sensor: Detects static color, application for sorting by color, color matching3. Flame Sensor: Sensitive to flame spectrum, application for fire detection, fire fighting robot, fire alarm4. Hall Sensor: 49E hall sensor, application for motor speed measurement, object position detection5. Infrared Reflective Sensor: Reflective infrared transceiver, application for robot path tracking, obstacle-avoiding car, pipeline counter6. Laser Sensor: Laser sensor, application forobstacle detection, pipeline counter, smart robot7. Moisture Sensor: Fork-like soil moisture sensor, application for auto watering system, flowerpot soil moisture detection8. Rotation Sensor: Detects clockwise/anti-clockwise rotations, application for positioning in Industrial Controls9. Sound Sensor: Onboard audio power amplifier LM386, application forambient sound detection, sound level detection10. Temperature-humidity sensor: DHT11 temperature and humidity sensor, application for ambient temperature and humidity detection11. Tilt Sensor: Detects shake signal, application for shake detection, guard alarm, smart car12. UV Sensor: Ultraviolet sensor, application for ultraviolet tester, outdoor ultraviolet detector, germicidal lamp12. Liquid Level Sensor: Detects liquid level, application for water level alarm

Read more less

1. Product: SG90 Servo2. Torque: 2.0kg/cm(4.8V), 2.2kg/cm(6V)3. Speed: 0.09s/60°(4.8V), 0.08s/60°(6V)4. Rotate angle: 180°5. Operating voltage: 4.8 ~ 6V6. Gear: plastic7. Dead band: 7us8. Weight: 10.5g9. Dimension: 22.8mm × 12.2mm × 28.5mm

Read more less

FeaturesThe SGP40 VOC Sensor is a digital VOC (Volatile Organic Compounds) sensor module which incorporates SGP40, designed for air quality monitoring. It can be used to measure fire coal, natural gas emissions, cigarette/cooking smoke, and emissions from constructing activity, decoration material, furnitures, home appliances, then generate digital signals for triggering air treatment devices. The SGP40 VOC Sensor is small in size for easy integration into air treatment devices and air quality monitors, definitely an ideal choice for learning air quality monitoring. 1. Incorporates SGP40, for measuring 0 ~ 1000 ppm of ethanol equivalents 2. Features humidity-compensation and low-heat-dissipation, providing outstanding performance on sorts of environments 3. Digital I2C output, less interference 4. Onboard voltage translator, compatible with 3.3V/5V operating voltage 5. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)Specification1. Sensor: SGP40 2. Measurement range: 0~1000 ppm of ethanol equivalents 3. Communication BUS: I2C (constant address: 0x59) 4. Operating voltage: 3.3V / 5V 5. Response time: Less than 10s (tau 63 %) 6. Switch-ON time: Less than 60s 7. Size: 27x20mm 8. Mounting hole size: 2.0mmPackage List1. SGP40 VOC Sensor x1 2. PH2.0 4PIN wire 20cm x1

Read more less

Features1. This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high speed LTE CAT4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. 2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on 3. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication 5. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position 10. Onboard audio jack and audio decoder, allows audio operation like making phone call 11. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 2. LTE-TDD: B34, B38, B39, B40, B41 3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz GNSS: 1. Satellite systems: GPS, Beidou, GLONASS, GALILEO, QZSS 2. Receiver type: - 16-channel - C/A Code 3. Sensitivity: - -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) - Cold starts: -148 dBm 4. Time-To-First-Fix (open air): - Cold starts: Less than 35s - Hot starts: Less than 1s SMS and Audio 1. SMS: - Supported types: MT, MO, CB, Text, PDU - Storage: USIM card and ME (default) 2. Audio feature: - Support echo cancellation - Support noise reductionPackage List1. M.2 TO 4G/5G HAT x 1 2. SIM7600G-H-M.2 x 1 3. Antenna 2pcs x 1 4. IPEX adapter cable 2pcs x 1 5. 2*20PIN pin header x 1 6. Passive GPS antenna x 1 7. Dual plug USB3.0 cable x 1 8. USB3.0 adapter x 1 9. USB2.0 adapter x 1 10. SMA protective cap 2pcs x 1 11. Screws pack x 1

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8200EA-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8200EA-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1

Read more less

Features1. Comes with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, supports 5G NSA and SA networking, supports multi-mode multi-band 2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS 3. Operating system support: Windows/Linux/Android 4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication 5. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series 6. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino 7. Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply 8. Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status 9. 4x SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas 10. 2x SIM card slot, dual card single standby, switchable via AT command 11. Onboard audio jack and audio decoder, allows audio operation like making phone call 12. High efficiency power supply circuit, up to 3A output currentSpecificationsFrequency band: 1. Sub-6G (SA): n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 2. Sub-6G (NSA): n41, n77, n78, n79 3. LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 4. LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 5. WCDMA: B1, B2, B3, B4, B5, B8 6. GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS Data rate 1. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL) 2. LTE: 1 Gbps (DL) / 200 Mbps (UL) 3. HSPA+: 42 Mbps (DL) / 5.76 Mbps (UL) Software functions 1. Operating systems: Windows/Linux/Android 2. Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 3. SMS: Supports MT, MO, CB, Text, PDU 4. Firmware upgrade: Supports firmware upgrade via USB port Applications 1. Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. 2. Application examples: CPE, Smart gateway, Drone, Live streaming, Remote treatment, Intelligent securityPackage List1. M.2 TO 4G/5G HAT x1 2. SIM8202G-M2 x1 3. Antenna 4pcs x1 4. IPEX adapter cable 4pcs x1 5. 2 x 20PIN pin header x1 6. Passive GPS antenna x1 7. Dual plug USB3.0 cable x1 8. USB 3.0 adapter x1 9. USB 2.0 adapter x1 10. SMA protective cap 4pcs x1 11. Screws pack x1

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8202G-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1

Read more less

FeaturesThis 5G/4G/3G Jetson Nano communication module adopts SIMCom 5G module SIM8202G-M2, supports 5G NSA and SA networking, providing data rate up to 2.4 Gbps (DL) / 500 Mbps (UL). The base board features standard M2 connector, allows connecting with different 4G or 5G communication module in M2 package. There are also onboard interfaces like USB3.1 port, audio jack, SIM card slot, etc. Combined with our configuration script and development resources, it is easy to enable 5G high speed communication for the Jetson Nano or computer. This 5G module is ideal for fast evaluating 5G modules, as well as being integrated into sorts of applications where 5G connection is required. 1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano 2. Come with SIM8202G-M2 core module, based on Qualcomm snapdragon X55 platform, with multi mode multi band support 5G/4G/3G communication, supports functions like phone call, SMS, cloud communication, etc. 3. USB 3.1 port for testing AT commands, sending messages, cloud communication, making phone call, getting GNSS positioning data, etc. 4. SIM card slot, supports 1.8V / 3V SIM card 5. 2x LED indicators, easy to monitor the working status 6. AT command support, based on 3GPP TS 27.007, 27.005 and V.25TER command set 7. Onboard audio jack and audio decoder, allows audio operation like making phone call 8. Multi-constellation dual-band positioning: GPS, GLONASS, Beidou, Galileo, and QZSS 9. Operating system support: Windows/Linux/AndroidSpecification1. Frequency band - Sub-6G (SA): N1, N2, N3, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G-M2) - Sub-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2) - LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 - LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48 - WCDMA: B1, B2, B3, B4, B5, B8 - GNSS: GPS, GLONASS, Beidou, Galileo, and QZSS 2. Data rate: - Sub-6G: 2.4 Gbps (DL)/500 Mbps (UL) - LTE: 1Gbps (DL)/200 Mbps (UL) - HSPA: 42 Mbps (DL)/ 5.76 Mbps (UL) 3. Software functions: - Operating systems: Windows/Linux/Android - Communication protocols: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0 - SMS: Supports MT, MO, CB, Text, PDU - Firmware upgrade: Support firmware upgrade via USB port 4. Hardware information: - SIM card: 1.8V/3.0V - Power supply: 5V 3A - Antenna connector: 4x IPEX-4 connector - Module dimensions: 42.0x30.0x2.3mm 5. Applications: - Applicable regions: Regions with 5G Sub-6G signal coverage including China, US, Japan, South Kor, Europe, the Middle East, Latin America, etc. - Application examples: CPE, Smart gateway, Drone, Live streaming, Intelligent securityPackage List1. SIMXXXX-M2 4G/5G module base x1 2. SIM8202G-M2 x1 2. 5G External Antenna x4 3. Power adapter 5V 3A x1 4. USB3.0 dual plug cable x1 5. USB 3.0 Adapter (C) x1 6. Heatsink x1 7. Screws pack x1

Read more less

1. SIM8262A-M2 SIMCom 5G module Sub-6G module based on Qualcomm Snapdragon X62 adopts 3GPP 5G Release 162. SIM8262A-M2 is a multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module, supports R16 5G NSA/SA, up to 2.4Gbps data transmission.3. It has powerful expansion capabilities and rich interfaces, including PCle, USB3.1, GPIO, etc. This module provides great flexibility and ease of integration for customers' applications4. SIM8262A-M2 adopts M.2 shape, AT command is compatible with SIM7912G/SIM8200X-M2 series modules. This also minimizes customer investment and shortens time to market5. It is designed for applications requiring high-throughput data communication under various radio propagation conditions. Due to the unique combination of performance, safety and flexibility, this module is well suited for many applications6. Standard M.2 interface7. High throughput data communication8. The AT command of SIM8262A-M2 is compatible with SIM7912G/SIM8200X-M2 series modulesSpecification:1. 5G standard: 3GPP R162. Chip: Qualcomm Snapdragon X623. Sub-6G: n1, n2, n5, n7, n12, n13, n14, n18, n20, n25, n30, n41, n48, n66, n71, n77, n78, n794. LTE-FDD: B1, B2, B4, B5, B7, B12, B13, B14, B17, B18, B19, B25, B26, B29, B30, B66, B715. LTE-TDD: В38, B41, B42, B43, B46, B486. WCDMA: B1, B2, B4, B5, B87. GNSS: GPS, GLONASS, Beidou, Galileo and QZSS8. Operating temperature: -30 to 70 degrees Celsius9. SIM card: 1.8v/2.95v10. Antenna: for 3G / 4G / 5G / GNSS; 4 x IPEX-4 connectors11. Power supply: 3.135-4.4v12. Interface: M.213. Applicable areas: CPE, intelligent gateway, drone, live broadcast, telemedicine, intelligent security, etc.14. Dimensions: 42 x 30 x 2.3mmData rate:1. Sub-6G: 2.4 Gbps (DL) / 500Mbps (UL)2. LTE1: Gbps (DL) / 200Mbps (UL)3. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)Software features:1. Operating system: Windows / Linux / Android2. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.03. Dialing: RNDIS, NDIS, PPP, MBIM4. SMS support: MT, MO, CB, Text, PDU5. Firmware upgrade: support firmware upgrade via USB port

Read more less

Features:1. Based on Qualcomm platform, supports 5G NSA and SA networking, and supports multi-mode and multi-band2. Multi-constellation dual-frequency positioning: GPS, Beidou, Glonass, Galileo, QZSS3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi or Jetson Nano motherboard for high-speed 5G communication4. Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 / RM5XX series, set by DIP switch5. Onboard UART, PWR and RST control pins with built-in voltage level converter enabled via DIP switch for use with hosts such as Raspberry Pi or Arduino6. The onboard USB-C interface can be turned on by a switch to connect an independent power supply to the module, supporting more loads and providing stable and flexible power supply.7. Onboard power switch, reset button and LED indicator light for easy switching on and off or monitoring module operating status8. 4 x SMA to IPEX antenna connectors with pre-soldered SMA terminals for antenna connection9. 2 x SIM card slots, dual SIM card single standby, can be switched by AT command10. Onboard audio jack and audio decoder for audio operations such as making phone calls11. High-efficiency power circuit, output current up to 3AProduct parameters:1. 5G standard: 3GPP R162. Chip: Qualcomm Snapdragon X623. Sub-6G: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n794. LTE-FDD: B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B325. LTE-TDD: B38, B39, B40, B41, B42, B436. WCDMA: B1, B5, B87. GNSS: GPS, GLONASS, Beidou, Galileo, QZSS8. Sub-6G: 2.4 Gbps (DL) / 500 Mbps (UL)9. LTE: 1 Gbps (downlink)/200 Mbps (uplink)10. HSPA+: 42 Mbps (downstream)/5.76 Mbps (upstream)11. Operating system: Windows/Linux/Android12. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.013. Dial-up: RNDIS, NDIS, PPP, MBIM14. SMS: supports MT, MO, CB, text, PDU15. Firmware upgrade: Support firmware upgrade through USB port16. SIM card: 1.8V/2.95V17. Antenna: suitable for 3G/4G/5G/GNSS, 6 × IPEX-4 connector, 4 × IPEX-4 connector18. Power supply: 3.135-4.4V

Read more less

1. 5G standard: 3GPP R162. Chip: Qualcomm Snapdragon X623. Operating system: for Windows/Linux/Android4. Dialing: RNDIS, NDIS, PPP, MBIM5. SIM card: 1.8V/2.95V6. Power supply: 3.135-4.4V7. Standard M.2 interface8. High throughput data communication9. The AT command of SIM8262E-M2 is compatible with SIM7912G/SIM8200X-M2 series modules

Read more less