Electronics Modules

1. Chip model: VL8172. Transmission speed: 5Gbps (theoretical)3. Input interface: USB-A4. Data cable length: 30cm5. Output interface: 4xUSB3.06. Interface compatibility: USB3.0 and backward compatible with USB2.0 and USB1.17. Supporting equipment: ROS robot/car, Raspberry Pi/Rising Sun RDK/Jetson series motherboards, PC computer, industrial computer8. Compatible systems: Win7/8/10, Linux, MacOS, Ubuntu9. Working voltage: 5V10. Working current: 90mA11. Output current: When the external power supply conditions are met, the total output current of four USB channels can reach 5A, and the output current of single USB channel can reach 1.5A12. External power supply voltage and current: 12V input 2.5A, 24V input 1.35A in the case of output 5V5A (laboratory data)13. External power supply interface: microUSB (5V), DC5.5x2.5 (9V-24V), XH2.54 interface (9V-24V)14. Protection circuit: overcurrent protection, short circuit protection, power reverse connection protection15. Dimensions: 68x60x18.5mm16. Weight: 36.5 grams17. The USB HUB board is specially designed for robot developers, compatible with Raspberry Pi, Jetson NANO series development boards18. Onboard VL817 HUB chip, 4 output USB3.0 ports, three power supply interfaces of micro USB, DC5.5x2.5 and XH2.5419. Support external wide voltage power supply, the total current can support 5A (MAX)20. It can provide more stable data transmission and avoid transmission failure due to insufficient current21. 1 input USB interface, 4 USB3.0 output interfaces, the transmission speed can reach 500MB/S22. Three power supply modes, support 9-24V external voltage input23. Wide range of applications, supporting robots, smart cars, Raspberry Pi, Jetson series boards, computers, etc.24. The USB3.0 HUB expansion board is designed to solve the problems of insufficient USB interface on the motherboard and insufficient power supply caused by the increase of USB peripherals.25. In addition to the USB-A standard data interface power supply, it also supports 5V (micro-USB), 9-24V (DC interface/XH2.54 socket) wide-voltage external power supply to ensure the normal power supply of USB peripherals26. Compatible with Win7/8/10, Linux, Ubuntu, MacOS systems, no driver required, plug and play27. If the USB device needs to be restarted, the device can be restarted by switching the power supply, without plugging and unplugging the damaged interface28. Equipped with VL817 main control chip solution, the main control performance is stable, and the transmission is stable and safe29. Efficient and safe power cooling management chip, using large-size heat sink to ensure stable temperature and safe transmission during high-power use30. 4-way USB device status indicators, the device connection status is clear at a glance

Read more less

Features:1. Support USB to 2 UART, or USB to 1 UART+1 I2C+1 SPI, or USB to 1 UART+1 JTAG2. Supports 2-channel high-speed UART interface, baud rate up to 9Mbps, with CTS and RTS hardware automatic flow control3. Supports 1-channel I2C interface, which is convenient for operating EEPROM or programming I2C devices such as OLEDs and sensors through the host computer.4. Supports 1 SPI interface and has 2 chip select signal pins, which can control 2 SPI slave devices at different times.5. Supports 1-way JTAG interface and can be used with OpenOCD for debugging and testing (due to limited chip and software function testing, users need to evaluate and test this function by themselves)6. Onboard 3.3V and 5V level conversion circuit, used to switch the working level of the communication interface, with better compatibility7. Onboard resettable fuse and ESD protection circuit provide over-current/over-voltage protection and ensure safe and stable communication.8. Aluminum alloy shell, oxidized matte surface, CNC process opening, sturdy and durable, excellent workmanship9. High-quality USB-B and DC connectors, smooth plugging and unplugging, durable and reliable, with anti-reverse connection protectionProduct parameters:1. Host interface: USB2. Power supply: USB port, 5V3. Working voltage: 3.3V/5V (selected through onboard switch)4. USB:Connector: USB-BInterface protection: resettable fuse, ESD protection5. Serial port:Channel: 2 (red DIP switch needs to be set to M0 mode)Connector: 6PIN IDC connectorBaud rate: 1200bps-9MbpsHardware flow control: CTS and RTS6. I2C:Channel: 1 (red DIP switch needs to be set to M1/M2 mode)Connector: 12PIN IDC connector (the first 4 pins are I2C)7. SPI:Channel: 1 (red DIP switch needs to be set to M1/M2 mode)Connector: 12PIN IDC connector (the last 8 pins are SPI)8. JTAG：Channel: 1 (red DIP switch needs to be set to M3 mode)Connector: 12PIN IDC connector (the last 8 pins are JTAG)9. Product size: 86 x 48 x 27.6mm10. Weight: 170gPacking list:-USB to UART/I2C/SPI/JTAG x1-USB Type A to Type B cable 1.2m x1-12PIN cable 20cm x1-6PIN cable 20cm x2

Read more less

Features:1. Supports connecting to host or MCU to control serial bus servo2. Allows simultaneous control of up to 253 ST/SC series serial bus servos (requires sufficient power supply)3. 9-12.6V voltage input (input voltage and servo voltage must match)4. Provide convenient serial bus servo control solutions5. Integrated control circuit to ensure stable operation of serial bus servo6. Compact size, saving space, suitable for integration into various projects with limited spaceProduct parameters:1. Power supply: DC 9-12.6V (ST series servo)2. Power connector: 5.5 × 2.1mm DC3. Communication interface: UART4. Mounting hole size: 2.5mm5. Mounting hole distance: 37 × 28mm6. Product size: 42 x 33mm7. Weight: 16 grams

Read more less

Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications.Product parameters:1. Frequency band: 2.412-2.484 GHz2. Wireless network: Station / AP / AP+Station mode3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19dBm (max @11Mbps)802.11g: +18dBm (max @54Mbps)802.11n: +17dBm (maximum @HT20, MCS7); +17dBm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89dBm (@11Mbps)802.11g: -81dBm (@54Mbps)802.11n: -73dBm (@HT20, MCS7); -71dBm (@HT40, MCS7)7. Baud rate: 300-460800 bps8. Check digit: none, odd, even, mark, space9. Data bits: 5-9 bits10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius16. Humidity range: 5%-95% relative humidity17. Product size: 85 x 84 x 24mm18. Weight: 157g, 169gPacking list:RJ45 network port:-RS232/485 to WIFI Ethernet (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1RJ45 network port supporting POE:-RS232/485 to WIFI POE ETH (B) x1-2.4G WiFi antenna x1-Rail mounting buckle x1-Screwdriver x1-Screw pack x1

Read more less

Features:1. WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.2. Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.3. Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.4. Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.5. Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.6. WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.7. Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.Product parameters:1. Tire material: nylon wheels, rubber tires2. Body material: 5052 aluminum alloy (2mm thick)3. OLED screen: 0.91 inches4. Chassis height: 33.70mm5. Tire diameter: 80mm6. Tire width: 42.50mm7. Motor: N20 12V 200RPM x 48. Number of driving wheels: 49. Running speed: 1.25m/s10. Vertical obstacle surmounting ability: 40mm11. Drive payload: 0.8kg12. Climbing ability: 22 degrees13. Minimum turning radius: 0m (rotating in place)14. Motor power: 1.5W x 415. Remote control function: WIFI AP/STA16. Upper surface area: 17551 square millimeters17. Communication interface: UART/serial bus servo interface/I2C18. Battery support: 18650 lithium battery × 3 (delivered without battery)19. Overall dimensions: 194×168×100mm20. Weight: 860g

Read more less

Product features:1. Adopts FT232BL chip with external EEPRON (93C46)2. Support Windows 103. Support 3 power supply modes: 5V external power supply, 3.3V external power supply, external power supply (requires 3.3V-5V)4. With 3 LEDs: TXD LED, RXD LED, POWER LED5. GND, RXD, TXD, 3V3, 5V: using a curved pin pin out6. The rest of the function PIN: reserved pads CTS, RTSInstructions for use: (to access the MCU as an example)1. GND: connected to GND2. RXD: connect to MCU.TX (Signal flow: MCU.TX - FT232 - PC.RX)3. TXD: connect to MCU.RX (signal flow: PC.TX - FT232 - MCU.RX)4. 3V3/5V: output 3.3V or 5V (the module is powered by USB, the jumper cap must be jumped to 3.3V or 5V)5. RTS: connect to MCU.CTS (signal flow: PC.RTS - FT232 - MCU.CTS)6. CTS: connect to MCU.RTS (Signal flow: MCU.RTS - FT232 - PC.CTS)

Read more less

Product features:1. Adopts FT232BL chip with external EEPRON (93C46)2. Support Windows 103. Support 3 power supply modes: 5V external power supply, 3.3V external power supply, external power supply (requires 3.3V-5V)4. With 3 LEDs: TXD LED, RXD LED, POWER LED5. GND, RXD, TXD, 3V3, 5V: using a curved pin pin out6. The rest of the function PIN: reserved pads CTS, RTSInstructions for use: (to access the MCU as an example)1. GND: connected to GND2. RXD: connect to MCU.TX (Signal flow: MCU.TX - FT232 - PC.RX)3. TXD: connect to MCU.RX (signal flow: PC.TX - FT232 - MCU.RX)4. 3V3/5V: output 3.3V or 5V (the module is powered by USB, the jumper cap must be jumped to 3.3V or 5V)5. RTS: connect to MCU.CTS (signal flow: PC.RTS - FT232 - MCU.CTS)6. CTS: connect to MCU.RTS (Signal flow: MCU.RTS - FT232 - PC.CTS)

Read more less

1. The input terminal has a MICRO USB female socket, you can directly use the mobile phone charger as an input to charge the lithium battery, and there are still input voltage wiring solder joints, which can be very convenient for DIY2. Power supply voltage: 5v3. Power supply current: 1A4. Purpose: Electric toys5. Charging cut-off voltage: 4.2v6. Large charging current: 1000mA7. Battery over-discharge protection voltage: 2.5v8. Battery overcurrent protection current: 3A9. Board size: 2.6x1.7cm10. Note: The load on the OUT terminal should be disconnected when charging, and the positive and negative poles should not be connected wrongly. Please use it according to the specifications, otherwise it will be directly damaged.

Read more less

1. Features: Higher copper content, good heat dissipation performance, strong current stability2. Manufacturing process: SMT placement machine manufacturing, non-manual welding, higher yield rate, more stable performanceRemarks:1. A single-head printer requires 4 A4988 modules.2. A set of dual-nozzle printer requires 5 A4988 modules.4. Delivery list: A4988 module x 1, heat sink aluminum sheet x 15. Matters needing attention: Please do not plug and unplug the motor and drive when the power is on, which will easily cause the drive to burn out; also do not adjust the current when the motor is running. The correct way is to first disconnect the power supply, unplug the motor, and then power on again, adjust the potentiometer, and measure the voltage on the potentiometer until the measured voltage is the same as expected. Do not plug in the reverse drive, otherwise it will burn out the drive and even the motherboard

Read more less

OverviewThis low power audio module is based on WM8960, supports stereo encoding/decoding, supports sound recording, whats more, it can directly drive speakers to play music.Features1. Integrates high-quality MEMS silicon Mic, supports sound recording2. Onboard standard 3.5mm 4-segment earphone jack, allows sound recording via external earphones with Mic3. Onboard dual-channel speaker interface, directly drives speakers4. Supports common audio sampling rates such as 8/11.025/22.05/44.1/48KHz, etc.5. Supports sound effects such as stereo, 3D surrounding, etc.6. Comes with development resources and manual (STM32 examples for playing, recording)Specifications1. CODEC: WM89602. Operating voltage: 3.3V3. Control interface: I2C4. Audio interface: I2S5. Audio format: WAV6. DAC signal-noise ratio: 98dB7. ADC signal-noise ratio: 94dB8. Earphone driver: 40mW (16Ω@3.3V)9. Speaker driver: 1W per channel (8Ω BTL)

Read more less

Overview1. The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.2. The PCF8563 RTC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.FeaturesPCF8563, I2C pinheader, I2C connector, 3.3V battery included

Read more less

OverviewThis is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. Whats more, the USB TO RS232/485/TTL comes with an aluminium alloy enclosure, make it solid and durable to work.The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without delay. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.Features1. USB TO RS232, USB TO RS485, USB TO TTL (UART)2. Adopt original FT232RL, fast communicating, stable and reliable, better compatibility3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. Aluminium alloy enclosure with sand blasting and anodic oxidation, CNC process opening, solid and durable10. 3 LEDs for indicating the power and transceiver status11. High quality USB-B and RS232 connectors, smoothly plug/pullSpecifications1. Product type: industrial optically isolated converter2. Baudrate: 300-921600bps3. Host port: USB4. Device port: RS485/RS232/TTL5. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output- Transmission distance: ~5m6. RS485:- Connector: screw terminal- Pins: A+, B-, GND- Direction control: hardware automatic control- Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)- Transmission distance: ~1200m- Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)7. RS232:- Connector: DR9 male- Protection: TVS diode, surge protection, ESD protection- Transmission distance: ~15m- Transmission mode: point-to-point8. TTL (UART):- Operating voltage: 3.3V/5V- Connector: screw terminal- Pins: TXD, RXD, GND- Protection: clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: point-to-point9. LED indicators:- PWR: red power indicator, light up when there is USB connection and voltage is detected- TXD: green TX indicator, light up when the USB port sends data- RXD: blue RX indicator, light up when the device ports send data back10. Operating environment:- Temperature: -15℃ ~ 70℃- Humidity: 5%RH ~ 95%RH11. Operating system: Windows 10 / 8.1 / 8 / 7 / XP12. Package contents:- USB TO RS232/485/TTL x1- USB cable x1

Read more less

OverviewThe USB3300 USB HS Board is an accessory board which acts as the USB high-speed external PHY device for ULPI interface, features the USB3300, MIC2075-1BM onboard.FeaturesUSB3300, MIC2075-1BM, ULPI interface

Read more less

GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868Overview1. This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.2. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.Features1. Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W2. Support SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.3. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning4. Bluetooth 3.0, supports data transferring through Bluetooth5. Onboard USB TO UART converter CP2102 for UART debugging6. 6x LEDs for indicating the module working status7. SIM card slot for 1.8V/3V SIM card8. RTC with backup battery holder9. Baudrate auto detection (1200bps ~115200bps)10. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)11. Support SIM application toolkit: GSM 11.14 Release 9912. Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)GSM/GPRS1. Band- GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz- Quad-band auto search- Compliant to GSM phase 2/2+2. Emitting power- Class 4 (2W @ GSM 850/EGSM 900 MHz)- Class 1 (1W @ DCS 1800/PCS 1900 MHz)4. GPRS connectivity- GPRS multi-slot class 12 (default)- GPRS multi-slot class 1~12 (configurable)5. GPRS data feature- Downlink speed: max 85.6kbps- Uplink speed: max 85.6kbps- Coding schemes: CS-1\CS-2\CS-3\CS-4- Support PAP (Password Authentication Protocol) for PPP connection- Support PBCCH- Support USSD6. SMS- Support: MT/MO/CB/Text/PDU mode- SMS storage: SIM card7. Audio- Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate- Support echo cancellation- Support noise reductionGNSS1. Receiver type- 33 tracking channels- 99 acquisition channels- GPS L1 C/A code2. Sensitivity- Tracking: -165 dBm- Cold starts: -148 dBm3. Time-To-First-Fix- Cold starts: 28s (typ.)- Hot starts: < 1s- Warm starts: 26s4. Accuracy- Horizontal position: <2.5m CEPBluetooth1. Integrates AT commands2. Compliant to Bluetooth specification3.0 + EDR3. Support SPP, OPP, HFP/HSP, etc.Misc1. Operating voltage: 5V2. Operating temperature: -40 degree C ~ 85 degree C3. Storage temperature: -45 degree C ~ 90 degree C4. Dimensions: 30.2mm x 65mmWhat is on Board1. SIM868 module2. ZMM5V1: Regulator diode3. SMF05C: TVS diode4. CP2102: USB TO UART converter5. MP1482: Power chip6. NDC7002N: Voltage level translator7. GPS status indicator8. NET indicator:- Flashes fast when the module starts up- Flashes slowly after GSM register succeed9. STA module working status indicator10. SIM868 UART Tx/Rx indicator11. Power indicator12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM86813 .Raspberry Pi GPIO connector14. SIM card slot15. USB TO UART interface16. 3.5mm earphone/mic jack17. GNSS antenna connector18. Bluetooth antenna connector19. GSM antenna connector20. CR1220 battery holder: for RTC backup battery21. UART selection switch- A: Control the SIM868 through USB TO UART- B: Control the SIM868 through Raspberry Pi- C: Access Raspberry Pi through USB TO UARTPackage Contents1. GSM/GPRS/GNSS HAT x12. GSM Antenna x13. GPS External Antenna (B) x14. Bluetooth Antenna x15. USB type A plug to micro plug cable x16. RPi screws pack (2pcs) x1

Read more less

1. Driver chip: SSD13312. Interface: SPI3. Resolution: 96x644. Display size: 0.95 inch5. Colors: 65K colorful6. Visible angle: >160 degree7. Operating temperature: -20~70 degree C8. Storage temperature: -30~80 degree C9. Operating voltage: 3.3V / 5V

Read more less

OverviewThis is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.Features1. 5.5 inch AMOLED, 1080x1920 resolution2. Toughened glass capacitive touch panel, 6H hardness3. Support popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers4. When works with Raspberry Pi, supports Raspbian / Ubuntu / Kali / Retropie, driver free5. When works as a computer monitor, support Windows 10/8.1/8/7, five-points touch, and driver free6. 3.5mm audio jack, supports HDMI audio output7. M2.5 screw holes for easy mountingPackage Contents1. 5.5inch HDMI AMOLED x12. HDMI cable x13. USB type A plug to micro B plug cable x14. HDMI adapter (B) x15. USB adapter (B) x16. Screws pack x1

Read more less

Overview1. Sensitive for alcohol, ethanol2. Output voltage boosts along with the concentration of the measured gases increases3. Fast response and recovery4. Adjustable sensitivity5. Signal output indicatorSpecifications1. Power: 2.5V ~ 5.0V2. Dimension: 40.0mm * 21.0mm3. Mounting holes size: 2.0mmApplications1. Car alcohol alarm2. BreathalyserHow to UseIn the case of working with a MCU:1. VCC: 2.5V ~ 5.0V2. GND: Power supply ground3. AOUT: MCU.IO (analog output)4. DOUT: MCU.IO (digital output)Package Contents1. MQ-3 Gas Sensor x12. 4-pin custom connector jumper wire x1

Read more less

Serial DataFlash Module with W25Q128JV Onboard, SPI InterfaceOverview1. Onboard serial NOR Flash memory W25Q128JV2. Support Standard/Dual/Quad SPI3. Support STM32F7 series Quad-SPI interface, provides related cube library demoFeatures1. Capacity: 128M-bit / 16M-byte2. Max frequency: =<133MHz3. Operating voltage: 2.7~3.6V4. Operating temperature: -40 degree C ~ +85 degree CDimension: 20.6mm x 38.9mm

Read more less

RS485 to Ethernet Converter, Easy-to-use, High-speed, Low-power, High-stability, UpgradableOverviewThe RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet, it can be configured via webpage.Features1. M0 series 32-bit ARM processor, fast speed, high efficiency2. 10/100M Auto-MDI/MDIX ethernet interface, regardless of cross-over or straight-through cable3. Configurable RS485 baudrate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)5. Configurable via webpage, AT commands, serial protocol, and network protocol, provides configuration protocol which can be integrated to your own software6. Support customized heartbeat packets, make sure the connection is truthful, as well as for actively retrieving sensor data7. Support customized registration packets, auto passing the registered packet as identifier after the connection is established, so that different devices can be distinguished8. Support customized webpage, allows user to customize the module configuration page9. Support RFC2217-like protocol, be able to communicate with devices whose serial setting (baudrate, data bit, etc.) may change10. KeepAlive mechanism, detects broken connection, auto re-connecting11. Support time-out reboot (no-data reboot), ensures a long-term stable connection, configurable reboot time12. Support DNS domain name resolution, configurable DNS server13. Support DHCP, auto-obtained IP or static IP14. Firmware is upgradable via the network15. Restore to factory settings via software and/or hardware16. Comes with default MAC address, which is customizable17. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software18. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.Specifications1. Ethernet:- Connector: 4-pin RJ45- Communication rate: 10/100Mbps- Interface protection: 1.5KV electromagnetic isolation- Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client- TX cache: 6Kbyte- RX cache: 4Kbyte2. RS485:- Connector: screw terminal (A+, B-, GND)- Data bit: 5bit, 6bit, 7bit, 8bit- Stop bit: 1, 2- Parity bit: None, Odd, Even, Mark, Space- Baudrate: 600bps~230.4Kbps- RX cache: 800byte- Hardware flow control: none- Interface protection:- 2KV ESD protection- RS485 pull up/down registers: 2.2KΩ3. Power:- Power supply: 5.0~7.0V (5V recommended)- Operating current: 150mA (@5V)- Power consumption: <1W- Interface protection: reverse-proof, ESD protection, anti-surge4. Environment:- Operating temperature: -25~75 degree C- Storage temperature: -40~105 degree C5. Size: 69.65*63.59*25.47mmPackage Contents1. RS485 TO ETH x12. 5V power adapter x1

Read more less

OverviewThe RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi. It gives your Pi the ability to control high voltage products such as home appliances.Features1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. High quality relays, loads up to 5A 250V AC or 5A 30V DC3. Photo coupling isolation, prevent interference from high voltage circuit4. Standard rail mount bottom case5. Onboard LEDs for indicating relays status6. Relay control pin selection jumper, allows to control the relays by custom pins other than the default pins7. Reserved control Interface, allows to work with controllers like PLC8. Comes with development resources, including examples in wiringPi, bcm2835, python, python-bottle (webpage control), and crontab (cron job)Specifications1. Power supply voltage: 5V2. Trigger signal: 3.3V/5V3. Relay channels: 8-ch4. Contact form: SPDT-NO,NC5. Closed current: 6mA (per channel)6. Connector: screw terminal block7. Dimension: 232 × 72 (mm)8. Mounting hole size: 3.0mm

Read more less

OverviewSpeaker expansion module designed for micro:bit, makes your micro:bit become a music player easily.Furthermore, it can also be used for Arduino development, compatible with 3.3V/5V Arduino boards.Features1. Onboard Hi-Fi chip NS80022. Sound volume adjustment3. Earphone jack output4. Comes with development resources (micro:bit graphical demo/python code/Arduino demo/user manual, etc.)Specifications1. Operating voltage: 2.0V ~ 5.5V2. Dimension: 36.52mm x 43.44mm3. Through holes diameter: 3.2mm

Read more less

OverviewThis solar power management module is designed for 6V~24V solar panel. It can charge the 3.7V Li battery through solar panel or USB connection, and provides 5V/1A regulated output.The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep working with high-efficiency, stability, and safety. It is suited for solar powered, low-power IoT, and other environmental protection projects.Features1. Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel2. Supports solar panel / USB connection battery charging3. For 6V~24V solar panel, DC-002 jack input or screw terminal input4. Onboard MPPT SET switch, select the level closed to input level to improve charging efficiency5. Two 5V output interfaces: pinheaders and USB port6. Onboard high capacity aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance7. 14500 battery holder and PH2.0 battery connector, for connecting multi kinds of 3.7V Li battery8. Several LED indicators, for monitoring the status of solar panel and battery9. Multi protection circuits: over charge / over discharge / reverse protection / over heat / over current, stable and safe to useSpecifications1. Solar panel input voltage (SOLAR IN): 6V~24V2. Micro USB input voltage (USB IN): 5V3. Pinheader / USB output (USB OUT): 5V 1A4. Charging cutoff voltage: 4.2V+/-1％5. Over discharging protection voltage: 2.9V+/-1％6. Solar panel charge efficiency: ~78%7. USB charge efficiency: ~82%8. 3.7V battery boost output efficiency: ~86%9. Max quiescent current: <2mA10. Operating temperature: -40~85C11. Dimension: 65.2mm x 56.2mm x 22.9mm

Read more less

Specifications1.Solar cell type: 156 monocrystalline cell2.Surface: toughened glass3.Frame material: anodic oxidation aluminum alloy4.Back board material: 0.25mm PET5.Power: 5.0W ± 5%6.Operating voltage: 6.0V ± 5%7.Operating current: 833mA ± 5% (max)8.Open circuit voltage: 7.2V ± 5%9.Short circuit current: 916mA ± 5%10.For use with: Solar Power ManagerNote: specifications above are tested on standard condition: 1000W/m2 radiation intensity, 25℃, AM1.5 air quality.

Read more less

Features1. Resistive touch screen TFT LCD, 4inch, 480x320 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO3. Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control4. PWM backlight control, allows to adjust the backlight to a comfortable level5. Micro SD slot, provides an easy way to store photos for displaying6. Controlled via SPI, only a few Arduino pins are used7. Comes with STM32 and Arduino examples, convenient for portingKey Parameters1. LCD Type: TFT2. LCD Interface: SPI3. LCD Controller: ILI94864. Touch Screen Type: Resistive5. Touch Screen Controller: XPT20466. Colors: RGB, 65K colors7. Resolution: 480x320 (Pixel)8. Aspect Ratio: 8:59. I/O Voltage: 3.3V/5VWiki : www.waveshare.com/wiki/4inch_TFT_Touch_Shield

Read more less

OverviewArduino is a massive ecosystem, if there is a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.What is more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.Supported Pi1. Raspberry Pi 1 Model A+2. Raspberry Pi 1 Model B+3. Raspberry Pi 2 Model B4. Raspberry Pi 3 Model B5. Raspberry Pi 3 Model B+ARPI600 Features1. Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields2. XBee connector for connecting various XBee modules3. Sensor interface for connecting various sensors4. Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter5. Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)6. Onboard RTCWhat is on the ARPI6001. Arduino connector: For connecting Arduino shields2. ICSP interface: Arduino ICSP3. XBee connector: For connecting XBee communication modules4. Sensor interface: For connecting sensors5. Raspberry Pi connector: For connecting Raspberry Pi6. USB TO UART7. TLC1543: AD converter8. PCF8563: RTC9. CP210210. 32.768KHz crystal: For RTC11. Power indicator12. XBee state LED13. XBee and Arduino interface RESET button14. XBee EASYLINK button15. RTC battery holder: For CR1220 button battery16. TLC1543 reference voltage configuration jumper17. RTC jumper18. UART jumper- When connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port- When connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port- When connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port19. Arduino AD selection jumper- Short 2 and 3: Arduino A0-A5 as AD input- Short 1 and 2: Arduino A0-A5 as digital control20. Arduino I2C selection jumper- Short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)21. Arduino SPI selection jumper- Short 1 and 2: Arduino D11-D13 as SPI control (default)- Short 2 and 3: Arduino D11-D13 as digital controlPackage Contents1. ARPI600 x 12. USB type A plug to mini-B plug cable x 13. RPi screws pack (2pcs) x 1

Read more less

USB compatible cable for in-circuit configuration and programming of all Xilinx devicesOverviewThe Platform Cable USB a USB compatible cable for in-circuit configuration and programming of all Xilinx devices. It is compatible with the original XILINX Platform Cable USB.Features- Performance1. Using CY7C68013A+FPGA solution, fully compatible with the original XILINX Platform Cable USB2. Programs all Xilinx devices, including FPGAs / CPLDs / ISP Configuration PROMs3. Supports JTAG, Slave-Serial and SPI programming, to config all Xilinx devices4. Interfaces to devices operating at 5V / 3.3V / 2.5V / 1.8V / 1.5V5. Optional target clock frequency, supports XILINX software automatic frequency adjustment6. Firmware auto upgrade, its possible to support more new released software and devices7. Anti-static and multi-layers signal isolation, to protect the target and the programmer itself- Supported software1. Xilinx ISE2. iMPACT3. ChipScope4. Vivado- Supported devices1. Xilinx FPGA devices: UltraScale / 7 series / Zynq / Kintex / Virtex / Artix / Spartan, etc.2. Xilinx CPLD devices: XC9500 / XC9500XL / XC9500XV / CoolRunner XPLA3 / CoolRunner-II, etc.3. Xilinx PROM devices: Platform Flash XCF00S / XCF00P / XL, etc.LED Status1. Red: USB connected2. Yellow: USB connected, and Vref (the target board) is poweredHow to Connect1. Connects to PC: Via USB interface2. Connects to target board: Platform Cable USB provides 3 different interfaces to connect with the target board: JTAG, Slave Serial, and SPI. The figure below shows the header pinouts of the interfaces:Package contents1. Platform Cable USB main unit x12. JTAG adapter x13. USB cable x14. 8-pin header to 7-pin separated cable x15. 8-pin header to 6-pin header cable x16. 14-pin (2.54mm pitch) JTAG cable x17. 14-pin (2mm pitch) JTAG cable x18. 10-pin (2.54mm pitch) JTAG cable x1

Read more less

DescriptionMini ST-LINK/V2 on a small single board, an extreme low cost solution for in-circuit debugger/programmer for STM8 and STM32.Features1. Onboard 500mA self-recovery fuse to avoid harming by short circuit2. Dual voltage output (3.3V/5V), easy for debugging/programming3. Standard USB interface for direct connection to PC4. Debugging/Programing performance- Debugging : run at full-speed, single-stepped, breakpoints, viewing variables and registers, etc.- Programming : supports FLASH ROM, EEPROM, AFR, etc.- USB2.0 combined with SWIM/SWD interfaces : quick response for debugging & fast speed for programming5. Upgradable firmware- The firmware is upgradable to support more devices in the future- Automatically upgraded6. Supported software- ST-LINK Utility v2.0 (or higher ver.)- STVD Version 4.2.1 (or higher ver.)- STVP Version 3.2.3 (or higher ver.)- IAR EWARM Revision v6.20 (or higher ver.)- IAR EWSTM8 Revision v1.30 (or higher ver.)- KEIL RVMDK Revision v4.21 (or higher ver.)- ATOLLIC- TASKING7. Supported devices- All the STM8 devices with SWIM interface- All the STM32 devices with SWD interfacePackage Contents1. ST-LINK/V2 (mini) × 12. 4-pin custom connector cable × 13. USB type A plug to receptacle cable × 1

Read more less

Yamaichi IC Test & Burn-in Socket with a simple board, especially for STM8 microcontroller in QFP48(0.5mm pitch) packageFeatures1. 4-pin SWIM Port for programming or testing2. External crystal can be connected via on board socket3. All the MCU pins are accessible on expansion connectorsSupported DevicesSTM8 microcontroller in QFP48(0.5mm pitch) package with compatible pinouts- STM8S105CxTx / STM8S207CxTx / STM8S208CxTx- STM8AF51x8T / STM8AF52x8T / STM8AF61x8T / STM8AF62x8TPackage Contents1. STM8-QFP48 × 12. USB power cable × 1

Read more less

1. Type: test block2. Working frequency: high frequency3. Application: integrated circuit IC4. Interface type: terminal5. Production process: injection molding6. Features: stable testing7. Contact material: beryllium copper shrapnel8. Insulator material: PET9. Number of cores: 1710. Purpose: programming socket, test socket, for testing, reading and writing of EMCP IC chips11. Lead spacing: 0.5mm12. Service life: 100,000 timesTesting method:1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test programFeatures:1. Also compatible with 186-FBGA 162-FBGA2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.3. Support hot plugging and separate power switch, support for testing through the USB interface or through the connection with the board on the board corresponding to the PIN4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter board

Read more less

1. Number of cores: 442. Features: U-shaped thimble, more stable contact3. Purpose: Programming socket, test socket, test, read and write on QFN44 IC chip4. Working frequency: High frequency5. Production process: Injection molding6. Application: Integrated Circuit IC7. Contact material: Beryllium copper shrapnel8. Insulator material: PPS/PET9. Chip size: 7x7cm10. Pin spacing: 0.5mm

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (H) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Camera, compatible with the original one, supports all revisions of the Pi2. 5 megapixel OV5647 sensor in a fixed-focus module3. Camera specifications- CCD size : 1/4 inch- Aperture (F) : 2.8- Focal Length : 3.4 mm- Angle of View (diagonal) : 66 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p 30fps, 720p 60fps and 640x480p 60/90fps video record6. Dimension: 25mm x 24mm x 9mmPackage Contents1. RPi Camera (D) x12. 15-pin FFC (opposite sides contact) x1Note: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Night Vision Camera, supports all revisions of the Pi2. 5 megapixel OV5647 sensor3. Adjustable focus distance4. Camera specifications- CCD size: 1/4inch- Aperture (F): 1.8- Focal Length: 3.6mm- Angle of View (diagonal) : 75 degree- Sensor best resolution : 1080p5. 4 screw holes- Used for attachment- Provide 3.3V power output- Support connecting infrared LED and/or fill flash LED6. Dimension : 25mm x 24mmPackage Contents1. RPi Camera (F) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

1. Raspberry Pi Camera, supports Raspberry Pi A+/B+/2B/3B/3B+2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.37mm- Angle of View (diagonal) : 72 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 300mm × 16mm × 5mm

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 2.35- Focal Length : 3.15mm- Angle of View (diagonal) : 160 degree (while other normal cameras 5.5are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. Dimension: 25mm x 24mmPackage Contents1. RPi Camera (G) x12. 15-pin FFC (opposite sides contact) x1Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Read more less

Features1. Raspberry Pi Camera, supports all revisions of Pi2. Embedded detachable IR-CUT filter to eliminate color distortion in daylight3. Equipped with infrared LED to support night vision4. 5 million pixel OV5647 sensor5. Adjustable focal length6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.8- Focal length: 3.6mm- Viewing angle (diagonal): 75.7 degrees- Sensor best resolution: 1080p7. 4 screw holes- for accessories- Provide 3.3V power output- Support for connecting infrared LEDs and / or fill flash LEDs8. Size: 31mm × 32mmNote: To use the camera on Raspberry Pi Zero / Zero W / Zero WH, you need to purchase a specific line: Raspberry Pi Zero v1.3 camera linePackage Contents1. RPi IR-CUT camera x12. Infrared LED board (B) x23. 15-pin FFC (relative side contact) x1

Read more less

1. Raspberry Pi Camera, supports only Raspberry Pi Zero V1.3 and Raspberry Pi Zero W2. 5 megapixel OV5647 sensor3. Camera specifications- CCD size : 1/4inch- Focal Length : 3.51mm- Angle of View (diagonal) : 69.1 degree- Sensor best resolution : 1080p4. 2592 × 1944 still picture resolution5. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record6. Dimension: 60mm × 11.5mm × 5mm

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Focal Length : 0.87mm- Angle of View (diagonal) : 200 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p6. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting fill flash LED7. 2592 × 1944 still picture resolution8. Support 1080p30fps , 720p60fps and 640x480p60/90fps video record9. Dimension: 25mm x 24mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CablePackage Contents1. RPi Camera (M) x12. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Raspberry Pi camera, supports all revisions of the Pi2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight3. Comes with infrared LED, supports night vision4. 5 megapixel OV5647 sensor5. Adjustable focus distance6. Camera specifications- CCD size: 1/4 inch- Aperture (F): 1.2- Focal Length: 8mm- Angle of View (diagonal): 40 degree- Sensor best resolution: 1080p7. 4 screw holes- Used for attachment- Provides 3.3V power output- Supports connecting infrared LED and/or fill flash LED8. Dimension: 31mm x32mmNote: To use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera CableNote: The actual image pixels is 5MP, which depends on the sensor, so it doesnt matter that there is a 3MP silk mark on the camera.Package Contents1. RPi IR-CUT Camera (B) x12. Infrared LED Board (B) x23. 15-pin FFC (opposite sides contact) x1

Read more less

Features1. Raspberry Pi Camera, supports all revisions of the Pi2. Fisheye Lens, offers wider field of view3. 5 megapixel OV5647 sensor4. Adjustable focus distance5. Camera specifications- CCD size : 1/4inch- Aperture (F) : 1.8- Focal Length : 1.55mm- Angle of View (diagonal) : 170 degree (while other normal cameras are typically 72 degree)- Sensor best resolution : 1080p6. 2592 x 1944 still picture resolution7. Support 1080p30fps, 720p60fps and 640x480p60/90fps video record8. Dimension: 32mm x32mmPackage Contents1. RPi Camera (I) x12. 15-pin FFC (opposite sides contact) x1

Read more less

Overview1. Smart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.2. Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.3. If you have got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.Features1. Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.2. Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.3. Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.4. Onboard TB6612FNG dual H-bridge motor driver.5. Onboard 0.91inch 128×32 pixels OLED, allows to display robot IP address, RAM, battery life, etc.6. Onboard ADS1115 AD acquisition chip for monitoring the battery in real time.7. Weight: 773gWhat is on the JetBot Expansion Board1. S-8254AA: Lithium battery protector, provides protections for over-charge, over-discharge, over-current, and short circuit2. ADS1115: 16-bit AD acquisition chip, monitoring the battery in real time3. AO4407A:: P-Channel MOSFET for protection circuit4. APW7313:: 5V power regulator for powering the Jetson Nano5. PCA9685: PWM controller, I2C interface, for IO expansion6. TB6612FNG: dual H-bridge motor driver7. 0.91inch OLED: SSD1306 driver chip, 128×32 pixels8. Battery charger input: charging the 3x 18650 batteries9. Power switch10. 18650 battery holder11. Motor connector (bottom side)12. Jetson Nano communication header: I2C interface and power supplyPacking List1. Metal box x12. Camera holder x13. Acrylic piece x14. Jetbot expansion board x15. IMX219-160 Camera x16. Wireless-AC8265 x17. Motor 2PCS x18. Wheel 2PCS x19. Omni-direction wheel 2PCS x110. Power adapter EU head x111. 12.6V battery charger x112. Wireless gamepad x113. Screwdriver 2PCS x114. 6Pin 9cm cable x115. Screws pack x116. Spanner x117. Cooling fan x118. Micro SD card reader x1

Read more less

1. Applied to touch sensors such as buttons, sliders and wheels2. Application scenarios: car control panels, LCD TVs and monitors, notebook computers, mobile phones, etc.3. The single-chip microcomputer integrates Atmels AVR microcontroller, and includes 1KB to 4KB of flash memory, with 32 KB to 256 KB of SRAM4. The device supports SPI and TWI (I2C-compatible) communication, providing high flexibility and working voltage from 1.8V to 5.5V5. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used6. Size: 24x18mm7. Model: ATTINY85 MICRO blue board

Read more less

1. Purpose: Digital power amplifier board2. Chip model: TPA31163. Input voltage: DC8-28V4. Output impedance: 4-82 ohm5. Output power: 2 x 120w6. Size: 83x60x25mm7. Weight: About 65gInstructions for use:1. Connect the power input terminal to a DC8-28V power supply. The recommended power supply is DC24V with a current of 6A, and the output power can reach 120W per channel.2. Connect the audio input terminal to the audio source, such as MP3, mobile phone, computer, etc.; it is recommended to connect the output terminal of the front power amplifier board3. Two audio output terminals are connected to two speakers respectively

Read more less

1. Get 51 Arduino STM32 microcontroller routine.2. With a USB interface, you can watch the computer positioning effect directly phone line.3. With the passive ceramic antenna and passive antenna amplifier, make better use of the individual effects.4. With SMA interface can be directly connected to an active antenna SMA.5. TTL level, compatible with 3.3V/5V systems.(Size: 39 x 25.5mm)6. Frequency: 1575.42MHz7. Features: Low electrode consumption. The system clock frequency is controlled by software to achieve a balance between system performance and power consumption, and it has also been widely used

Read more less

1. Using XL4016 switch voltage regulator chip, with MBR20100 dual rectifier, the input voltage can reach 40V and output 1.25~36V continuously adjustable2. 180KHz fixed frequency PWE step-down (step-down) DC/DC converter3. High efficiency and up to 8A load driving capacity4. Low ripple and excellent line and load regulation ability5. Built-in frequency compensation and fixed frequency oscillator6. Built-in over-current and short-circuit protection functions7. Built-in thermal shutdown function, output protection function, output overvoltage protection8. Voltage regulation method: PWM modulation9. Chip model: XL4016E110. Type: DC/DC power supply module11. Input voltage: DC4-40v12. Output range: DC1.25-36v13. Rated current: 8A14. Rated power: 200w15. Conversion efficiency: 94%16. Switching efficiency: 180Khz17. Size: 61x41x27mm

Read more less

1. Ultra-wide input and output voltage, ultra-high conversion efficiency2. Small size and adjustable boost module, which can be easily installed in various small devices3. MicroUSB input can be used, and the common voltages of 9V, 12V, 15V, 18V, 24V can be easily obtained through the mobile phone data line with a USB charger or mobile power supply, which is very convenient to use4. Packing: individually packed in anti-static bag5. Type: voltage regulator IC6. Output current: 2A (recommended to use within 1A)7. Input voltage: 2 v--24 v8. Output voltage: 28 v (recommended to use within 26V)9. Size: 30x17x14mmPrecautions:1. This module is a boost module, the output voltage should be greater than the input voltage2. The peak current output current does not exceed 2A

Read more less

1. The module uses STs L298N as the main driving chip, which has the characteristics of strong driving ability, low heat generation and strong anti-jamming ability.2. The module can use the built-in 78M05 to work through the drive power supply, but in order to avoid damage to the voltage regulator chip, when using a drive voltage greater than 12V, please use an external 5V logic power supply3. This module uses large-capacity filter capacitors and freewheeling protection diodes, which can improve reliability4. The high-voltage and high-current full-bridge driver with two bridges can be used to drive inductive loads such as DC motors, stepping motors, relay coils, etc.5. It has two enable control terminals, allowing or prohibiting the device to work without being affected by the input signal. There is a logic power input terminal to make the internal logic circuit work at low voltage.6. Features: high working voltage, large output current, using standard logic level signal control7. An external detection resistor can be connected to feedback the change to the control circuit8. Drive voltage: 5-35v9. Drive current: 2A10. Working voltage: 5v11. Working current: 0-36mA12. Storage temperature: -20 to 135 degrees Celsius13. Main control chip: L298N14. Packing: Individually packed in anti-static bag15. Rated power: 25w16. Working mode: double H-bridge drive17. Weight: 30g18. Size: 43x43x27mm

Read more less

1. No need to write Ethernet underlying code to implement TCP/IP protocol stack2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing3. Support 10/100MBPS transfer rate4. Support 8 independent ports working at the same time5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the "client", "server" and "UDP" three working modes, as well as a detailed manual10. Chip model: W550011. Input voltage: 3.3-5v12. Size: about 55 x 28mm

Read more less