Test Equipment

Feature 1.Fast and easy measurement。2.Non contact precise measurement。3.Built-in laser pointers increase the target accuracy。4.Adjustable emissivity:0.1~1.0,adjust the corresponding emssivity according to different object5.℃/℉ selection,MAX,MIN,AVG,DIF function6.REC memory function for 99 groups7.Color LCD display 8.Resolution 0.1℃/℉9.Automatic Trigger Off10.Automatic power off11.D:S=13:1Package included 1 x Non-Contact Infrared Thermometer (no including battery)1 x English Manual

Read more less

Feature 1.Fast and easy measurement。2.Non contact precise IR and TK temperature measurement。3.Built-in laser pointers increase the target accuracy。4.Adjustable emissivity:0.1~1.0,adjust the corresponding emssivity according to different object5.℃/℉ selection,MAX,MIN,AVG,DIF function6.REC memory function for 99 groups7.Color LCD display 8.Resolution 0.1℃/℉9.Automatic Trigger Off10.Automatic power off Package included 1 x Non-Contact Infrared Thermometer (no including battery)1 x English Manual

Read more less

Feature 1.C/f setting2.Built-in laser point increase the target increase3.Automatic data hold4.Auto power off5.White backlit LCD display6.Overrange indication7.High temperature8.MAX,MIN,DIF,AVG record9.High/low alarm,trigger lock10.Adjustable emissivity11.Data record Package included 1 x Non-Contact Infrared Thermometer (no including battery)1 x English Manual1 x tripod1 x Plastic box

Read more less

1. Divided into 4 gears, ??1 gear: 0.0 - 199.9Lux, ??10 gears: 20.0*10 - 199.9*10Lux, ??100 gears: 20.0*100 - 199.9*100Lux, ??1000 gears: 20.0*1000 - 199.9* 1000Lux 2. Can be connected by Bluetooth, easy to use 3. USB computer analysis software, data automatic / manual storage 4. Backlight and data retention, automatic switch meter settings 5. Good quality and long service life

Read more less

1. Sensitivity: 50ppm 2. Reflect time: 2 seconds 3. High sensitivity and fast response 4. 16-inch long gooseneck 5. Good quality and long service life

Read more less

1. Highest real-time sampling rate: 1Msps2. Accuracy: 12Bit3. Sampling buffer depth: 1024 bytes4. Analog band width: 0-200KHz5. Vertical sensitivity: 5mV / Div – 20V / Div (progressive in 1-2-5 way)6. Adjustable vertical displacement with instructions7. Input impedance: 1MΩ8. Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)9. Coupling methods include: DC / AC / GND10. Horizontal time base range: 10μs / Div – 50s / Div (progressive in 1-2-5)11. Trigger mode: With automatic, regular and single shot, easy to capture instantaneous waveform12. Trigger on rising or falling edge13. Trigger level position is adjustable, with indication14. Observe waveform before trigger (negative delay)15. Freeze waveform display at any time (HOLD function)16. Signal source: Comes with 1KHz /3.3V square wave test17. The parameters that can be displayed are: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, and effective value.18. Save / recall waveform, the waveform does not disappear after shutdown19. Packing list:20. 15001K (SMD components are soldered)

Read more less

1. Practical and hard aluminum alloy shell with long service life.2. The strong magnet at the bottom absorbs the workpiece for easy measurement.3. Data hold and slope function, large LCD backlit display, easy to read measurement data.4. Relative / absolute measurements are interchanged at any position.5. Portable size, easy to use with other measurement tools and expand the measurement range.6. It is widely used in the wood processing industry for household or industrial use (especially furniture manufacturing).7. Material: aluminum alloy + ABS8. Display mode: LCD backlight display9. Measuring range: 4 x90 degrees10. Resolution: 0.05 degrees11. Accuracy: +/- 0.2 degrees12. Repeatability: 0.1 degree13. Battery: 2 X AAA batteries (not included)14. Working temperature: 0-40 degrees Celsius15。 Item size: 56x56x26mm

Read more less

1. Features:- High sensitivity, wide measuring range and long service life.- Using precision G-M tube as the core sensor.- Can be applied to material inspection, environmental testing, radiological protection, radiopharmaceutical screening, etc.2. Material: ABS3. Detectable species: Beta, Gamma, X-ray4. Sensor type: G-M tube5. Energy range: 50kev-1.5mev is less than 30%6. Relative inherent error: less than or less than 10%7. Sensitivity: 80cpm / μSV / Co-608. Maximum dose equivalent rate: 99.99μsv / h9. Voice source: real particle sound / alarm sound / mute10. Alarm threshold: 0.5 / 1.0 / 2.0 / 5.011. Use ambient temperature: -25 ~ + 45 degrees Celsius12. Relative humidity: less than 95%13. Power supply: Lithium battery charging (with battery)

Read more less

1. This frequency meter can measure the frequency parameters of continuous carrier signal (intercom, cordless phone) and digital signal (GSM, CDMA, PHS, wireless remote control, etc.), with signal strength indication. It is a maintenance staff, wireless enthusiasts to test the frequency And the preferred tool for signal strength.2. Frequency counting resolution: 200K (dedicated for digital signal), 1K, 100HZ, optional3. Test distance: 450M is about 8 meters. 150M is about 5 meters (please test with actual distance, different instruments have different distances)4. Test range: 50MHZ --- 2400MHZ5. Battery: 9V laminated battery 6F226. Automatic shutdown: 2 minutes (200K file without automatic shutdown)

Read more less

1. Number of channels: 22. Bandwidth: 20 (MHz)3. Sampling rate: 48M (GS / s)4. Dimensions: 130 * 110 * 60 (mm)5. Weight: 0.5 (kg)6. Application: 3-in-1 multi-function, with functions of digital oscilloscope, spectrum analyzer and data recorder; oscilloscope probe uses standard BNC connector, and can also be replaced with 100X or high-voltage probe and probe7. Special design: carefully designed 20M bandwidth, 48M sampling rate, 2 channels, two-channel virtual oscilloscope, spectrum analyzer and data recorder that alternately support X, Y and X, Y alternate modes.8. Applicable scenarios: vehicle maintenance, electrical appliance maintenance, mobile phone maintenance, research and teaching9. Packing includes: host x1, USB test line, probe x2, CD x110. Advantages: compact and portable, can be directly put into the computer bag, easy to carry and teach

Read more less

1. Dimensions: 132×69×31mm2. Weight: 200 grams3. Reading display: 3-1/2 digit LCD4. Gear position: electric field-V/m (volt/meter); magnetic field--uT (micro Tesla)5. Accuracy: electric field: 1V/m; magnetic field: 0.01μT6. Range: electric field: 1V/m-1999V/m; magnetic field: 0.01uT--19.99uT7. Alarm threshold: electric field: 40V/m; magnetic field: 0.4uT8. Test bandwidth: 5Hz-3500MHz9. Sampling time: about 0.4 seconds10. Sensor head: single axis (top of instrument)11. Overload prompt: LCD displays "1"12. Operating temperature: -15℃-+60℃13. Operating humidity: relative humidity below 80%14. Working voltage: 9V (6F22 9V battery) (not included)Application range:1. Outdoor environment electromagnetic radiation test application: all electromagnetic radiation sources within the instrument test technical indicators, such as substations, high-voltage lines, transformers, power distribution rooms, cables, mobile phone towers, TV signal towers, broadcast signal towers, etc. 2. Indoor environment electromagnetic radiation test application: computers, televisions, copiers, fax machines, air conditioners, refrigerators, stereos, washing machines, wires, power supplies, mobile phones, wireless routers, etc. All electromagnetic radiation sources within the instrument test technical indicators

Read more less

1. Support six test wavelengths: 850/1300/1310/1490/1550/1625nm 2. Support SC/FC interface 3. Support red laser test 4. Detector type: InGaAs 5. Deviation: +-5% 6. Red Laser working wavelength: 650nm 7. Working temperature: -10~+60 degrees Celsiu 8. Storage temperature: -25~+70 degrees Celsius 9. Automatic shutdown time: 10 min 10. Power supply: 1.5V AA x 3(Not include)

Read more less

1. Working voltage: 3V2. Working current: 10uA3. Rated power: 0.03W4. Dimensions: 131x25.1x10.9 mm5. Battery: CR20326. When there is less water, the red light flashes once every 5 minutes7. One-key real-time monitoring of the current soil state and moisture content8. Insert into the soil, do not need to pull out for long-term monitoring, a must for lazy people to grow flowers9. Three kinds of red, green and blue indicator lights, according to different water content, adapt to common flowers and plants, select indicator range according to different plant characteristics

Read more less

1. Material: PPO shell, inner core galvanized copper2. Weight: About 42 grams3. Size: about 16.3x2.9x1.6 cm4. Test items: TDS/conductivity/temperature5. Test range: 0-9999PPM6. Resolution: 1PPM7. Temperature test range: 0-99 degrees Celsius8. Accuracy: +/-2%9. Power supply:Contains a 3V button battery (CR2032)10. Scope of application: Used in water treatment industry, drinking water industry, family, personal home travel, field work, etc. as a drinking water quality inspection tool11. Features: LED backlight display, convenient reading, clear eye protection, data retention, Fahrenheit/Celsius conversion, high-precision probe, light and portable12. Note: When the PPM value is less than 40, the backlight is green; when the PPM value is greater than 40, the backlight is red13. Influencing factors: Water temperature, TDS pen can not be used to measure high temperature water (for example: hot water); water flow rate, TDS pen can not be used to measure water with large shaking; region, each region, city due to different pipelines and water sources , TDS values are different

Read more less

Features:1. With magnet adsorption2. Four-digit display for large range3. With waterproof, digital storage, lock, automatic shutdown functions4. New appearance, classic fashion designTechnical Parameters:1. Measuring range EC: 0-9999uS2. Temperature: 0-80 degrees Celsius; 32-176 degrees Fahrenheit3. Accuracy: +/-2﹪4. Battery: CR2032 button battery x1 (delivered with battery)5. Size: 15 x 2.8x 1.3cm6. Weight: 42.5 g (1.5 oz)7. Purpose: Water treatment, purification equipment, household water purifier, flower aquarium

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-200mm

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-300mm

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-400mm

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-500mm

Read more less

1. The high linear scales is designed, high , stable and accurate. 2. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. 3. Easy to install and maintain, waterproof, dust-proof good, long service life. 4. Widely used, high stabilization, capacity of resisting disturbance well. 5. Suitable for JCS900-2AE / JCS900-3AE data display instrument. 6. Material: metal 7. Accuracy: +-5um 8. Resolution: 5um 9. Measuring Range: 0mm-600mm

Read more less

1. Use a 9V battery2. Measuring range: 0-5003. Resolution: 1.0mm4. Measuring accuracy: ±0.2mm5. Wide adaptability6. Low consumption, durable7. Accurate measurement and clear reading8. Fast detection speed and high sensitivity9. Adapt to the water quality of various environments and regions10. Scope of use: tunnel lining, bridges, slopes, docks, gates, continuous walls11. The use of anti-grading excitation circuit and corrosion-resistant electrode can effectively prevent the electrode from oxidizing and rusting, and keep the sensitivity unchanged for long-term use12. Size: 30x43x14.5cm13. Net weight: 2.7kg for 10 meters, 3.3kg for 20 meters, 2.85kg for 30 meters, 2.95kg for 50 meters, 4.3kg for 100 meters

Read more less

1. Use a 9V battery2. Measuring range: 0-5003. Resolution: 1.0mm4. Measuring accuracy: ±0.2mm5. Wide adaptability6. Low consumption, durable7. Accurate measurement and clear reading8. Fast detection speed and high sensitivity9. Adapt to the water quality of various environments and regions10. Scope of use: tunnel lining, bridges, slopes, docks, gates, continuous walls11. The use of anti-grading excitation circuit and corrosion-resistant electrode can effectively prevent the electrode from oxidizing and rusting, and keep the sensitivity unchanged for long-term use12. Size: 30x43x14.5cm13. Net weight: 2.7kg for 10 meters, 3.3kg for 20 meters, 2.85kg for 30 meters, 2.95kg for 50 meters, 4.3kg for 100 meters

Read more less

1. Use a 9V battery2. Measuring range: 0-5003. Resolution: 1.0mm4. Measuring accuracy: ±0.2mm5. Wide adaptability6. Low consumption, durable7. Accurate measurement and clear reading8. Fast detection speed and high sensitivity9. Adapt to the water quality of various environments and regions10. Scope of use: tunnel lining, bridges, slopes, docks, gates, continuous walls11. The use of anti-grading excitation circuit and corrosion-resistant electrode can effectively prevent the electrode from oxidizing and rusting, and keep the sensitivity unchanged for long-term use12. Size: 30x43x14.5cm13. Net weight: 2.7kg for 10 meters, 3.3kg for 20 meters, 2.85kg for 30 meters, 2.95kg for 50 meters, 4.3kg for 100 meters

Read more less

1. Use a 9V battery2. Measuring range: 0-5003. Resolution: 1.0mm4. Measuring accuracy: ±0.2mm5. Wide adaptability6. Low consumption, durable7. Accurate measurement and clear reading8. Fast detection speed and high sensitivity9. Adapt to the water quality of various environments and regions10. Scope of use: tunnel lining, bridges, slopes, docks, gates, continuous walls11. The use of anti-grading excitation circuit and corrosion-resistant electrode can effectively prevent the electrode from oxidizing and rusting, and keep the sensitivity unchanged for long-term use12. Size: 30x43x14.5cm13. Net weight: 2.7kg for 10 meters, 3.3kg for 20 meters, 2.85kg for 30 meters, 2.95kg for 50 meters, 4.3kg for 100 meters

Read more less

Features1. 6 optic wave length for selection, including 850nm, 1300nm, 1310nm, 1490nm, 1550nm and 1625nm. 2. Universal optic interface design, FC converter for FC/SC/ST interface. 3. Reading unit switching between absolute power and relative power. 4. Battery volume display, reminding you to replace batteries in time. 5. 10 minutes auto power off to save power. (This function can be set off.) 6. Light weight & mini size & low power consumption. 7. Widely applicable to optic fiber engineering, optic fiber sensor research, optic elements production, optic elements research, etc.Specification1. Material: ABS 2. Power Supply: 2 x 1.5V AAA battery (Not included) 3. Measuring Range: -70~+6dBm 4. Wavelength: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm 5. Resolution: 0.05 6. Accuracy: Greater than or equal -48dBm, +/-2dBm; Less than or equal -48dBm, +/- 3.5dBm 7. Operation Environment(Greater than or equal -48dBm): 0~40 degree C (32~104 degree F), 5~95% 8. Operation Environment(Less than or equal -48dBm): 0~32 degree C(32~89.6 degree F), 5~80% 9. Storage Environment: 0~40 degree C(32~104 degree F), 5~95% 10. Auto-off: 10 minutes

Read more less

1. Material: ABS housing 2. Features: Testing gauss, keep you away from radiation , good for your health 3. Special Functions: 5-LED indicators, each represent different value of radiation; Easy to use; Powered by 1 x 9V (included) 4. Application Monitoring: 50/ 60Hz frequency 5. Other: Dark green 0 to 1.5 milliGauss; Light green 1.5 to 2.5 milliGauss; Yellow 2.5 to 10 milliGauss; Orange 10 to 20 milliGauss; Red 20+ milliGauss 6. Size: 14.3 x 5.3 x 2.9cm

Read more less

Pure carbon monoxide (CO) is colorless, odorless, and non-irritant gas: molecular weight: 28. 01; Density: 1. 250g/ l; freezing point: - 207C; boiling point: - 190C. Its solubility in water is quite low, but it dissolves instantly in ammonia water. Air mixed explosion limit is between 12. 5% and 74%. After entering human body, carbon monoxide will combine with hemoglobin in blood, making the hemoglobin not able to combine with oxygen, which causes oxygen deficit to organism organization, leading to death from suffocation. Therefore, carbon monoxide is toxic, and is colorless, odorless, and tasteless, which is easy to be ignored and thus causing poisoning. The carbon monoxide detector can detect the concentration of carbon monoxide gas, and observe the value of carbon monoxide gas concentration at any time. It has a very clear large LCD screen, sound and light alarm prompts, to ensure that dangerous gases can be detected under very unfavorable working environments and prompt operators to prevent them in time. It is widely used in petroleum, chemical, coal, metallurgy, papermaking, fire fighting, municipal administration, telecommunications, food, textile and other industries. 1. Gas Tested: CO in the air 2. Measuring Range: 0-1000ppm 3. Resolution: 1ppm 4. Minimum Reading: 1ppm 5. Basic Error: +/-5%(f.s), +/-10ppm 6. Response Time: 60 seconds 7. Sensor Type: Electrochemical CO sensor

Read more less

Features 1. Split Type Design: the separation of the measurement part and reading part with retractable spring can avoid the influence of strong light on the naked eye. 2. Wide Measurement Range: 0-200000 lux and 0Fc ~ 20000Fc with switchable units of Lux / Fc and temperature units of degree C / degree F. 3. Large illumination probe effectively increases the measurement area with better processing efficiency in higher or narrower measurement environment. 4. 2 recording modes: automatic storage of illumination data (up to 2000 groups) and manual storage (up to 60 groups). 5. MAX / MIN / Difference Value / Data Hold functions, high accuracy with automatic range and quick response. 6. Large and clear LCD display with backlight for easy reading. 7. Low battery indication & auto power off, energy saving. 8. Widely used for monitoring light intensity in homes, laboratories, office, schools, indoor farming, etc. Specification 1. Material: Plastic 2. Measuring Range: 0 Lux ~ 200,000 Lux, 0Fc ~ 20000Fc 3. Power Supply: 3 x 1.5V AAA Batteries (Not Included)

Read more less

Features1. Measurement: With high sensitivity detector to pick up temperature and humidity with quick response and high precision, it can review the readings of the current, MAX, MIN, up limit and low limit data. Automatically record and store the data of temperature and humidity. 2. Data Transfer and programming: directly connect the device with PC USB interface to transfer data with PC and to set up sampling period, storage interval and alarming. 3. Analyzing: With specialized software to analyze the data of temperature and humidity with easy and reliable operation. 4. Safety: Bracket allows screw fastening with transparent water dust proof cover to protect the device from moisture and a up low limit can be set to alarm is overflow readings. 5. Convenience: It is compact and portable to be placed and worked like a flash disk. Besides, can be displayed with battery volume alert.Specification1. Temperature measuring range: -30-80 degree C 2. Humidity measuring range: 0~100%RH 3. Memory size: 32256 4. Power: 3.6V Lithium Battery (included) 5. Accuracy tolerance: +/-0.3 degree C (typical),+/-2%RH(typical) 6. Repeatability: +/-0.1 degree C (typical) 7. Size: 126 x 28 x 21mm

Read more less

Specifications1. Display: MAX 999 counts LCD display (1000 counts only at 1T is displayed) 2. Over range indication: OL mark appears on insulation resistance range. LO mark appears on voltage range 3. Auto-ranging: Range shifts to upper range: 1000 counts. Range shifts to lower range: 95 counts (merely on the insulation resistance range) 4. Sample rate: 0.5-10 times / sec 5. Operable altitude: Less than or equal 2000m (Indoor use) 6. Operation circumstance: Temperature 0-40 Celsius Degree, humidity: Less than or equal 85% 7. Storage circumstance: Temperature -20-60 Celsius Degree, humidity: Less than or equal 90% 8. Overload protection: Insulation resistance: AC 1200V / 10s, Voltage: AC 720V / 10s 9. Voltage resistance: AC8320 (50/60Hz)/5 seconds (between electrical circuit and enclosure) 10. Insulation resistance: 1000M ohms of more / DC 1000V (between electrical circuit and enclosure) 11. Power Supply: DC 12V (8 x 1.5V LR14 batteries) (included) 12. Size: 153mm x 96mm x 220mm 13. Weight: 1032g (without batteries and test wires)Features1. Auto discharge function to make the operation safe 2. LCD backlight function 3. Digital display of measurement results 4. Live circuit warning symbols with audio sounds 5. Automatic shutdown function, the instrument will automatically shut down after 10 minutes without any operation 6. Set the test time function to automatically perform the measurement within the specified time 7. Low battery indicator 8. PI test (Polarization Index measurement) 9. PI measurement can automatically measure the resistance ratio according to the setting at any two points of time 10. External DC power supply (DC12V, 1A power adapter) can be used for measurement

Read more less

Features1. Real-time dynamic measurement of PM2.5/PM10 concentration in air. 2. Ambient temperature and humidity measurement/temperature unit conversion. 3. It has three different display mode switching. 4. Many function, MAX/MIN display, data saving function, sound and light alarm settings and LCD backlight display.Specification1. Gas Tested: Particulate Concentration of PM2.5/PM10 in the air 2. Temperature Range: (0-5000)ug/m3; Measuring Range: 1ug/m3; 3. Resolution: 1ug/m 4. Resolution particle size: Greater than or equal 0.3um 5. Response Time: Less than or equal 10S 6. Measuring Principe: Laser diffusion Principle 7. Sensor Type: Universal digital particle concentration sensor 8. Operating Environment: 0-50 degree C, 32-122 degree F; 10-90%RH 9. Power: 3 x 1.2V Ni-MH AAA batteries(Built-in) / 5V / 1A power adapter

Read more less

1. Function: Detect O3/temperature/humidity2. Display mode: 2.8 inch LCD screen display, 320 x 240 pixels3. Sampling time: 1.5 seconds4. Power supply: 2000 mAh lithium polymer battery5. Detection range: 0.000~5.000ppm6. Detection principle: Electrochemistry7. Response time: Diffusion is less than or equal to 15S8. Repeat value: Less than or equal to +/-2%9. Resolution: 0.001ppm10. Insulation resistance: Greater than or equal to 20MΩ11. Alarm function: Sound (2-3 sounds)12. Alarm action value: 0.3/0.6ppm (alarm on/off can be switched)13. Test content: O3+AQI+temperature+humidity14. Used for ozone residue detection in offices, indoors and outdoors, and after disinfection15. 24-hour real-time monitoring16. Material: ABS TFT screen17. Color: Black + orange18. Dimensions: 164 x 74 x 26MM

Read more less

1. Metal shell, large screen touch is more precise and easy to operate2. No need to connect to the power supply, get rid of the shackles of the data line, and can be used alone3. It can test 2.4G-3G antennas, as well as duplexers and filters4. Measuring frequency range: 50kHz-3GHz5. System dynamic range (after calibration): 70dB (50k to 1.5GHz); 60dB (to 3GHz)6. S11 noise floor (after calibration): -50dB (to 1.5GHz); -40dB (to 3GHz)7. Scanning rate: 100 points/second8. Number of scanning points (on the device screen): adjustable, up to 201 points9. Number of calibration points (the maximum number of scan points for USB): 1024 points (when connecting to a computer and using a host computer)10. Power supply: USB, 400mA11. RF port: SMA (not RP-SMA)12. USB interface: Micro USB13. Display screen: 3.2 inch TFT (320 x 480)14. Battery: 2000 mAh 3.6V/3.7V lithium battery15. Net weight: 320 grams16. Port 2 return loss: greater than or equal to 13dB (to 3GHz), 20dB (to 1.5GHz)17. Computer software compatibility: Linux, Windows (above 7)

Read more less

1. Purpose: Measure tilt angle2. Resolution: 0.1 degree3. Measuring range: 4x90 degrees4. Power supply: 1 AAA battery (not included)5. Size: About 5.7x3 cm6. Weight: About 70 gramsFeatures:1. 4 kinds of units can be switched, angle, slope, in/ft, mm/m2. Powerful adsorption magnet design, 360-degree comprehensive measurement, inclination/level test function3. The screen automatically flips. When the instrument is placed upside down, the display screen will automatically flip and display, 360 measurement, convenient for viewing data Strong backlight4. Convenient to view data, automatic shutdown after 1 minute of non-use, energy saving and power saving5. It can be locked at any angle, and the HOLD key can hold measurement data at any angle

Read more less

1. Measuring range:0-1999 PPm(mg/L) 2. Resolution: 1 PPm(mg/L) 3. Accuracy: +/-2%F.S 4. Operating Temperature: 0 degree - 50 degree C(32degree F-122 degree F) 5. Pocket sized and feather-weight for portable use in a large number of applications including Production and drinking of pure water, Cleanness of swimming pool water, Food processing, Hospitals products, Aquatic cultivation, Boiler water, Households and offices, Aquarium water, Teaching of physics and chemistry, Electroplating water, Cooling towers, Laboratories, Ionized water and water quality testing etc. 6. Size: 150x27x20mm 7. With TDS calibration solution (1382ppm 25 degree)

Read more less

1.This is a digital TDS meter tester to test the filter water quality purity, to check the performance of your water filter, to check for hardness to make sure you always drink pure water.Saves measurements for convenient reading and recording New Arrival 2.Auto-off function: turns off meter after 5 minutes of non-use to conserve batteries 3.Automatic temperature compensation 4.Shift between TDS and conductivity 5.Can be used in : Water purifiers and filters, food(vegetable, fruit)& drink quality monitoring, pools and spas, aquarium, hydroponics

Read more less

1. Wide range of detectable requency 2. Can detect the electromagnetic radiation everywhere 4. Easy operation,can detect the power of electromagnetic radiation around home electronics,electricty wire,industrial equipment and so on 5. For detecting environmental electromagnetic radiation: indoors,office,computer station room industrial control room,electricity wire,high voltage wire,monitor and so on which are the origin of radiation 6. For detecting hom electronics: cellphone,PC,TV Set copy machine,fax machine,AC,refregrator and so on 7. Requency range: 50Hz-2000MHz 8. Reacting time: 0.4S 9. Voltage: 9V 10. Battery: 1x6F22/9V(not included) 11. Size: 133x70x30mm

Read more less

1. Brix Refractometer,are developed for working with sugar related liquids (fruit juices, soft drinks,wine), help monitor and control sugar concentrations in foods and beverages. 2. Whether users are checking the Ripeness of fruit in the field, verifying product quality after harvesting, or controlling concentrations during processing and packaging, refractometers provide critical information to ensure product quality. But,it is also commonly used for controlling the concentration of various industrial fluids cutting lubricants and flux rinsing compounds). Full ranges of measurement is available. 3. Check the ripeness of fruit whilst its growing - Verify the quality after picking or harvesting - Control the concentrates during processing 4. Measuring Range : Brix 0-32% 5. Minimum Divisions : Brix 0.2% 6. Automatic Temperature Compensation (ATC) 7. Size: 170x40x40mm

Read more less

1. This product adopts piezoelectric effect of artificial polarized ceramic for design. It is suitable for monitoring all kinds of vibrating mechanical facilities, especially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation. 2. Simple to use, the structure is compact, portable for carrying along with measurement. 3. Visually display measurement value and state. 4. Different vibration frequency selection. 5. High sensitivity probe for accurate measurement Provides long and short probe head, each one is suitable for different situation measurements. 6. Equipped with AC signal output interface. 7. Low power indication. 8. Auto power-off. 9. LCD backlight. 10. Measuring frequency range of acceleration: 10Hz~1KHz (LO); 1KHz~15KHz (HI). 11. Measuring frequency range of Velocity: 10Hz~1KHz (LO) 12. Measuring frequency range of Displacement: 10Hz~1KHz (LO)

Read more less

1. Description: - Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc. - Vehicle Testing - First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition - Ignition: primary and secondary - Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position - Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus - Performer: Petrol/Diesel - Starter and charging circuits 2. Oscilloscope: - 8 channels oscilloscope, 2.4MSa/s real time sampling rate - 12 bits vertical resolution, spectrum analysis function Programmable Generator - 8 channels programmable generator - Can analog signals of crankshaft, camshaft etc 3. Others: - USB 2.0 interface plug and play, and no need extra power supply - More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use

Read more less

1. Time Setting Range: 0-99,999.99 Hours 2. Voltage: AC 220-240V, 50Hz 3. Suitable for houses, industrial usages and air conditioners 4. Size: 70 x 70 x 37mm 5. Weight: 56g

Read more less

1. Brand new and high quality 2. Material: ABS 3. Length: 56mm

Read more less

1. Powerful spring pulling the mini hooks to grasp tiny components firmly and avoid any short-circuit. 2. You can connect the clips to multimeter or DC power by a lead. 3. Help you to test IC or repair cell phone and other mini electronics much more conveniently 4. Copper with gold plated material ensures the accuracy while testing. 5. Test hook probe with solder port fits various connection for equipment like a digital multimeter 6. Material: ABS 7. Length: 40mm

Read more less

Features1. Date / month / year / clock with temperature humidity display 2. Button to switch temperature display unit. 3.Check and clean the memory: Press the (MEMORY) memory button can check the maximum(MAX) / minimum(MIN) / temperature and humidity value in the memory. When showed Maximum(MAX) / minimum(MIN) temperature and humidity value in display, long press the (MEMORY)memory button to clean the Maximum(MAX) / minimum(MIN) temperature and humidity value in the memory. 4.The date and clock setting : When display the clock long press the (MODE) button start to set the clock, followed by minutes hours 12/24 hours year mouth day, press the (ADJ)key to adjust, then press the (MODE) button to confirm the clock and date. 5.The alarm time setting: When display the clock,short press (MODE) button to switch to the alarm display, and then long press the (MODE) button start to set the alarm time followed by minutes hours, press the (ADJ) button to adjust. Then press the (MODE) button again to confirm the alarm time setting mode. 6.The alarm clock and the whole point time keeping opening and closing when display the clock, should press (MODE) button to switch to the alarm display,and then press the (ADJ) button to open and close alarm clock or the whole point timekeeping,followed by the alarm clock opened the whole point time keeping opened both the alarm clock and the whole point time keeping opened both the alarm clock and the whole point time keeping closed. 7. This product use 1.5V A A A *2 (Not included) 8. The font is displayed fuzzy please replace the battery 9. The six functions:luminous memory The temperature The clock humidity The alarm clock

Read more less

About the product1. EC conductivity meter for test the quality of water. 2. The measuring water probe of conductivity test pen is made of titanium alloy materials. 3. Appearance dexterous, beautiful, small size, measuring high precision. 4. Large-screen digital display. 5. Easy to clean, and easy to carry. 6. Quick measurement, 5-30 seconds can finish one measurement. 7. With Automatic Temperature Compensation 8. EC conductivity meter has a wide range of applications including aquarium, hydroponics, water systems, aquaculture, pools and spas, labs & scientific testing, boilers & cooling towers, home, office, physical & chemical teaching, cosmetics and so on.The Test Pen Using1. Remove the protective cover. 2. Press the ON / OFF switch, connect power supply. 3. Put the US conductivity insert test pen into the test liquid until the liquid immerses slightly below the position of the immersion line. 4. Gently shaking, eliminate the bubbles of electrode. 5. Read the data after the indication stable (about 10 seconds). Press the HOLD key, the number locked. You can take the US conductivity test pen out the surface of liquid to read. Press again the HOLD key, then it can be unlocked. 6. After using, turn off the power, clean the electrode with water, then put on protective sleeve.

Read more less

Pure carbon monoxide (CO) is colorless, odorless, and non-irritant gas: molecular weight: 28. 01; Density: 1. 250g/ l; freezing point: - 207C; boiling point: - 190C. Its solubility in water is quite low, but it dissolves instantly in ammonia water. Air mixed explosion limit is between 12. 5% and 74%. After entering human body, carbon monoxide will combine with hemoglobin in blood, making the hemoglobin not able to combine with oxygen, which causes oxygen deficit to organism organization, leading to death from suffocation. Therefore, carbon monoxide is toxic, and is colorless, odorless, and tasteless, which is easy to be ignored and thus causing poisoning. The carbon monoxide detector can detect the concentration of carbon monoxide gas, and observe the value of carbon monoxide gas concentration at any time. It has a very clear large LCD screen, sound and light alarm prompts, to ensure that dangerous gases can be detected under very unfavorable working environments and prompt operators to prevent them in time. It is widely used in petroleum, chemical, coal, metallurgy, papermaking, fire fighting, municipal administration, telecommunications, food, textile and other industries. 1. Gas Tested: CO in the air 2. Measuring Range: 0-1000ppm 3. Resolution: 1ppm 4. Minimum Reading: 1ppm 5. Basic Error: +/-5%(f.s), +/-10ppm 6. Response Time: 60 seconds 7. Sensor Type: Electrochemical CO sensor

Read more less