CN Warehouses

1. Strong magnetic mounting film, strong adsorption, easy to install 2. Smart touch dimmable, easy to use 3. Energy saving and environmental protection, soft lighting and eye protection 4. The silicone hose can be bent at will to adjust the angle of the light source 5. The USB socket is easy to carry and widely used 5. Voltage: 5V 6. Power: 6W 7. Interface: USB 8. Wire length: 1.4 meters

Read more less

1. Reserved charging port design, you can charge without removing the cover 2. Bright luster, not easy to fade 3. It can fully protect the equipment from normal scratches, dirt, tears and wear 4. Does not get hot when charging 5. Small size, easy to carry 6. Headphones are not included

Read more less

1. Reserved charging port design, you can charge without removing the cover 2. Bright luster, not easy to fade 3. It can fully protect the equipment from normal scratches, dirt, tears and wear 4. Does not get hot when charging 5. Small size, easy to carry 6. Headphones are not included

Read more less

1. Reserved charging port design, you can charge without removing the cover 2. Bright luster, not easy to fade 3. It can fully protect the equipment from normal scratches, dirt, tears and wear 4. Does not get hot when charging 5. Small size, easy to carry 6. Headphones are not included

Read more less

1. Reserved charging port design, you can charge without removing the cover 2. Bright luster, not easy to fade 3. It can fully protect the equipment from normal scratches, dirt, tears and wear 4. Does not get hot when charging 5. Small size, easy to carry 6. Headphones are not included

Read more less

1. Reserved charging port design, you can charge without removing the cover 2. Bright luster, not easy to fade 3. It can fully protect the equipment from normal scratches, dirt, tears and wear 4. Does not get hot when charging 5. Small size, easy to carry 6. Headphones are not included

Read more less

Features1. Its work is characterized by side refrigeration and side fever2. Hot and cold on both sides of the temperature difference of 68 degrees3. Connected to the 12-volt power supply cooling piece on both sides there will be difference in temperature, side cold side of the heat, do not long power cooler radiator, otherwise it will cause cooler internal overheating and burning4. These devices must be used in conjunction with a heat sink to avoid burned5. Each device is full inspected and tested6. Fitted with 6-inch insulated leadsSpecification1. Size: 40mm x 40mm2. Operates from 0~15.2V and 0~6A3. Operates Temperature: -30C to 70C4. Max power consumption: 60W5. Material：Semiconductor/ceramic plates4. Package included: 1 x cooler plate moduleInstallationCooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.

Read more less

This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43ASpecification1. Double BTS7960 large current (43 A) H bridge driver;2. 5V isolate with MCU, and effectively protect MCU;3. 5V power indicator on board;4. Voltage indication of motor driver output end;5. Can solder heat sink;6. Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);7. Isolation chip 5 V power supply (can share with MCU 5 V);8. Able to reverse the motor forward, two PWM input frequency up to 25kHZ;9. Two heat flow passing through an error signal output;10. Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;11. The supply voltage 5.5V to 27V12. Size: 5.5 * 5 * 4 cm;13. Material: FR414. Other Features: A product for Arduino that works with official Arduino boards.15. Weight: 70g 16. Packing List: 1 * Stepper Motor Driver

Read more less

Before Installation NotesTips 1: Test before installationWhen testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device.Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.Tips 2: Simulates testingScreen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.Tips 3: Do not over-bend cablePlease make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. LCD display + touch screen digitizer assembly replacement part.2. Replace the old, broken, cracked, damaged one.3. Make your device look more refreshing than ever.4. Completely fit and work.5. Each item has been checked and in good condition before shipping.6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly with frame for Asus ZenFone 5 Lite X017DA ZC600KL S630 SDM630 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly (with frame) for Huawei Honor 9 Lite 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly (with frame) for Huawei Honor 9 Lite 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly (with frame) for Huawei Enjoy 8 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly (with frame) for Huawei Enjoy 8 Plus 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly for Lenovo Tablet Xiaoxin Pad Pro 11.5 inch TB-J706 TB-J706F(2021). 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for LG G Pad 10.1 / V700 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and be cautious not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Microsoft Lumia 650 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan 2. Original top quality. 3. Complete fit and work 4. Supply quality warranty with professional service

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Sony Xperia XZ1 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia Lumia 1520 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.Advantages1. Large stock, fast delivery, can meet large purchasing plan 2. Original top quality. 3. Complete fit and work 4. Supply quality warranty with professional service

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Nova 7 5G 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei MediaPad M6 10.8 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.1. Replacement LCD display + touch screen digitizer assembly for Huawei Nova 2s. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Garmin Forerunner 735 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD display + touch screen digitizer assembly for Huawei Mate 20 X. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed.Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Doogee S86 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Doogee S96 Pro 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Honor 30 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installedBefore Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Before Installation NotesTips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product1. Replacement LCD screen + touch screen digitizer assembly for Huawei Honor Play4 / TNNH-AN00 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Read more less

About the product1. Replacement LCD Display + Touch Screen Digitizer Assembly for Alcatel A7 / 5090 / 5090Y / 5090A 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Read more less

Material:GlassFeature:High-temperature Resistance Glass Tea SetCapacity:450ml/550ml/750ml/950mlFeatures: 1. This healthy and safe product can be used as a teapot for brewing and filtering as well as a fashion and elegant decoration for enjoyment.2. It is resistant to high temperature and low temperature. Its resistance to instantaneous temperature difference from subzero 20 degrees to 180 degrees enables it strong adaptability. It will not be easy to break and can be heated with open fire after the water is added. Notes: 1-3cm error is a normal phenomenon due to manual measurement.It is recommended to clean the tea residue and other stains with a toothpaste, which is very clean and will not scratch the teapot body.

Read more less

Material:GlassFeature:High-temperature Resistance Glass Tea SetCapacity:450ml/550ml/750ml/950mlFeatures: 1. This healthy and safe product can be used as a teapot for brewing and filtering as well as a fashion and elegant decoration for enjoyment.2. It is resistant to high temperature and low temperature. Its resistance to instantaneous temperature difference from subzero 20 degrees to 180 degrees enables it strong adaptability. It will not be easy to break and can be heated with open fire after the water is added. Notes: 1-3cm error is a normal phenomenon due to manual measurement.It is recommended to clean the tea residue and other stains with a toothpaste, which is very clean and will not scratch the teapot body.

Read more less

Material:GlassFeature:High-temperature Resistance Glass Tea SetCapacity:450ml/550ml/750ml/950mlFeatures: 1. This healthy and safe product can be used as a teapot for brewing and filtering as well as a fashion and elegant decoration for enjoyment.2. It is resistant to high temperature and low temperature. Its resistance to instantaneous temperature difference from subzero 20 degrees to 180 degrees enables it strong adaptability. It will not be easy to break and can be heated with open fire after the water is added. Notes: 1-3cm error is a normal phenomenon due to manual measurement.It is recommended to clean the tea residue and other stains with a toothpaste, which is very clean and will not scratch the teapot body.

Read more less

Material:GlassFeature:High-temperature Resistance Glass Tea SetCapacity:450ml/550ml/750ml/950mlFeatures: 1. This healthy and safe product can be used as a teapot for brewing and filtering as well as a fashion and elegant decoration for enjoyment.2. It is resistant to high temperature and low temperature. Its resistance to instantaneous temperature difference from subzero 20 degrees to 180 degrees enables it strong adaptability. It will not be easy to break and can be heated with open fire after the water is added. Notes: 1-3cm error is a normal phenomenon due to manual measurement.It is recommended to clean the tea residue and other stains with a toothpaste, which is very clean and will not scratch the teapot body.

Read more less

1. Item Type: Backpacks2. Lining Material: Polyester3. Main Material: Nylon4. Gender: Unisex5. Interior: Interior Compartment,Interior Slot Pocket6. Security anti-theft trinity password lock7. Side portable USB interface8. Strap adjustment buckle9. Portable headset interface design10. Invisible zipper security bag11. Side net pocket12. Computer compartment13. Size: 28 x 12 x 47cm14. Weight: 0.56kg

Read more less

1. Item Type: Backpacks2. Lining Material: Polyester3. Main Material: Nylon4. Gender: Unisex5. Interior: Interior Compartment,Interior Slot Pocket6. Security anti-theft trinity password lock7. Side portable USB interface8. Strap adjustment buckle9. Portable headset interface design10. Invisible zipper security bag11. Side net pocket12. Computer compartment13. Size: 28 x 12 x 47cm14. Weight: 0.56kg

Read more less

1. Use high quality ABS material, more durable, non-toxic, safe and tasteless. 2. Baffle card slot design, gently press both side, the baffle can be easily removed. 3. Reasonable design, easy cutting, hanging hole design, can be hung, also can paste 3M glue. 4. Two kinds of cutter, round for cutting tin foil, oil-absorbing paper; suitable for cutting cling film.Storage paper towels, plastic wrap, tin foil, etc., the top can also put some seasonings.

Read more less

1. Material: PVC; Acrylic waterproof glue2. Application: stove, kitchen cabinet, bathroom, etc.3. All-match artistic patterns add brilliance to the kitchen and bathroom gaps4. Beautiful and practical, keep the surrounding crevices clean and hygienic5. Good sealing, mildew and dustproof6. Specification: 320x3.8cm

Read more less

1. Name: Rechargeable Emergency Lighting2. Dimensions: 98 x 68 x 59mm3. Input voltage: 110-2404. Effective life: 80,000 (9H)5. Weight: 148g6. LED lamp beads: 137. How to use: Charge the lamp before use, it can be used after charging is completed, and the storage time is long.8. Built-in 700MAH lead-acid battery

Read more less

1. Name: Rechargeable Emergency Lighting2. Dimensions: 98 x 68 x 59mm3. Input voltage: 110-2404. Effective life: 80,000 (9H)5. Weight: 148g6. LED lamp beads: 137. How to use: Charge the lamp before use, it can be used after charging is completed, and the storage time is long.8. Built-in 700MAH lead-acid battery

Read more less

1. Body material: high borosilicate glass2. Liner material: ceramic3. Control method: microcomputer type4. Product model: HT-5905. Rated voltage: 220V~6. Rated frequency: 50Hz7. Rated power: 1200W8. Capacity: 1800 ml9. Delivery list: health pot, stew pot, yogurt box, steamed egg rack, microporous filter, descaling agent, instruction manual10. Size: base: 23x19.5cm, pot body: 22x23cm11. Weight: about 2.3kg12. Features: 12-hour appointment, multi-use for one thing, automatic heat preservation, memory for lifting pot

Read more less

Keyboard:1. Lightweight and stylish, easy to carry, suitable for home, office, games2. Reasonable design layout, simple and fashionable, mini shape3. Rich multimedia functions4. Comfortable and quiet, feel good in use5. The round keycap design fits the fingers and is comfortable to use6. Button life: more than 3 million times7. Number of keys: 78 keys8. Operating temperature: -10 to 55 degrees Celsius9. Line length: 1.3 meters10. Dimensions: 284x134x18mm11. Weight: 263gMouse:1. Sweat-proof and non-slip surface, refreshing to the touch2. Mouse wheel, three-dimensional design, comfortable feel and sensitive scrolling3. Button life: more than 3 million times4. Number of keys: 3 keys5. Cable length: 1.25 meters6. Dimensions: 113 x 59 x 20mm7. Weight: 63g

Read more less

Keyboard:1. Lightweight and stylish, easy to carry, suitable for home, office, games2. Reasonable design layout, simple and fashionable, mini shape3. Rich multimedia functions4. Comfortable and quiet, feel good in use5. The round keycap design fits the fingers and is comfortable to use6. Button life: more than 3 million times7. Number of keys: 78 keys8. Operating temperature: -10 to 55 degrees Celsius9. Line length: 1.3 meters10. Dimensions: 284x134x18mm11. Weight: 263gMouse:1. Sweat-proof and non-slip surface, refreshing to the touch2. Mouse wheel, three-dimensional design, comfortable feel and sensitive scrolling3. Button life: more than 3 million times4. Number of keys: 3 keys5. Cable length: 1.25 meters6. Dimensions: 113 x 59 x 20mm7. Weight: 63g

Read more less

Feature:1. Wireless charging,Instant charging2. Strong battery life,built-in 200MA lithium polymer battery about 60days standby in the car for a long range so you are prepared;3. Support multi-point link technology can be connected to two mobile phones;4. Chinese and English voice alerts,easy to grasp;5. Fingerpring touch no pressure required,instead of button control to avoid uncomfortable pressure to the ear,more easy to control;6. Intelligent noise reduction based on DSP,call clarity improved by 30%,noisy environment,can also clear call.Parameters:1. Bluetooth: V5.02. Receiving Distance: 10meters3. Working voltage: 3.7V4. Charging Time: About 1 hour5. Standby connection time: 30day6. Music playing time: 5hours7. Calling time: 5hours8. Horn specification: 32 ohms8. Speaker specifications: 32 ohms9. Speaker size: 13mm10. Sensitivity: 90DB11. Working frequency: 20Hz-20GHz12. Packing size: 16*10.2*3.3CM13. Single weight: 108GPacking list:Headset X1Change cable X1User Muse X1

Read more less

Feature:1. Wireless charging,Instant charging2. Strong battery life,built-in 200MA lithium polymer battery about 60days standby in the car for a long range so you are prepared;3. Support multi-point link technology can be connected to two mobile phones;4. Chinese and English voice alerts,easy to grasp;5. Fingerpring touch no pressure required,instead of button control to avoid uncomfortable pressure to the ear,more easy to control;6. Intelligent noise reduction based on DSP,call clarity improved by 30%,noisy environment,can also clear call.Parameters:1. Bluetooth: V5.02. Receiving Distance: 10meters3. Working voltage: 3.7V4. Charging Time: About 1 hour5. Standby connection time: 30day6. Music playing time: 5hours7. Calling time: 5hours8. Horn specification: 32 ohms8. Speaker specifications: 32 ohms9. Speaker size: 13mm10. Sensitivity: 90DB11. Working frequency: 20Hz-20GHz12. Packing size: 16*10.2*3.3CM13. Single weight: 108GPacking list:Headset X1Change cable X1User Muse X1

Read more less

1. Flip button design without blocking the screen 2. Rear-trigger feel, custom setting operation, six-finger linkage, multiple ways of playing 3. Left and right opening design, does not affect mobile phone charging 4. Foldable buckle on the back, mobile phone bracket in seconds, adjustable in two levels 5. Rounded corners, skin-friendly, and feel good 6. Compatible with 4.7-6.5 inch mobile phones Product parameters: 1. Product size: 160x119x42mm 2. Material: environmental protection ABS + metal

Read more less

1. Automatic jailbreak 2. Fast checking the original Bluetooth/WIFI code 3. Fast checking the original Bluetooth/WIFI code 4. Check whether the handset is matched with the original machine 5. Unbound the receiver FPC, support fix face id & true tone without original receiver FPC 6. Only support for A8-A11, iOS12-14.8

Read more less