Live Equipment

1. The connection can be rotated 360 degrees, convenient to choose a suitable shooting angle2. Can be clamped on the desktop, sunshade, glass, round rod and other places, strong availability3. Metal material is stronger, wear-resistant and durable4. Metal hose can be bent at will5. Double-headed design, can be switched at will, easy to use6. Interface: 1/4 inch7. Length: about 70cm8. Weight: about 470g

Read more less

1. Sensor: electret capacitor2. Directivity: omni-directional3. Sensitivity: -34dB4. Signal to noise ratio: 60dB5. Frequency range: 35Hz-18KHz6. Connector: Tpye-C/USB-C7. Cable length: about 1.5m8. Gross weight: about 33gFeatures:1. Plug and play, simplify, normal identification of external, use worry-free2. Using omnidirectional pickup microphone, high radio sensitivity, high fidelity of human voice recording3. High-density windproof sponge, effectively prevent the exhaled air from spraying wheat, isolate wind noise and background sound interference, so that the sound recording more detailed4. Light lapel clip design, weighing about 6g, clip in the collar will not collapse in a fold, closer to the source of sound accurate pickup5. Shielded audio cable, blocking electromagnetic interference, TPE line skin resistance to pull, the delivery of pure original sound

Read more less

1. Intelligent noise reduction, high sensitivity, metal tube body, cardioid pointing2. Dual pickup mode, push the button up and down, switch with one button, flexible and convenient3. Canon interface 3.5mm plug, the cable length is 5 meters, the connection is firm, not easy to fall off, strong compatibility4. Energy conversion method: capacitive5. Directivity: single super pointing6. Frequency response: 100-16000Hz7. Sensitivity: short distance 5-10mv/pa, long distance 10-15mv/pa8. Output impedance: short distance 1K ohms, long distance 2.3K ohms9. Signal to noise ratio: 60dB10. Applicable occasions: news interview, micro film shooting, various press conferences, event recording11. Power supply: 3.5mm wire to connect the device/1 x AA battery (shipment without battery)12. Product size: 28 x 2.2 x 2.2 cmPacking list:-Microphone x 1-Windproof cotton x 1-Pole clamp x 1-Hot shoe mount x 1-5m canon wire x 1

Read more less

1. The leg tube is made of high-elastic foam protective cover, wrapped with a thickened aluminum alloy inner core, which is strong and durable, and will not break after repeated playing2. 360-degree horizontal/vertical switching, front and rear 180-degree flip, can shoot down/down3. Dual expansion ports on both ends of the clip, which can be used with fill light and microphone4. Push-type lock quick-release plate, faster disassembly and assembly;5. 1/4 universal screw, compatible with cameras, ring lights, Gopro, cameras, projectors, etc.6. 360-degree universal spherical head, can shoot from multiple angles7. Applicable to multiple scenarios8. Material: ABS+ aluminum alloy9. Load capacity: 2.5 kg10. Mobile phone clip distance: 55-94mmPacking list:-Tripod x 1-Mobile phone holder x 1-Gopro connector x 1-Bluetooth remote control x 1

Read more less

1. Gold-plated joint, good contact performance, antioxidant2. The shell is made of metal, which is sturdy and durable, effectively resistant to interference and noise3. Soft PVC wire, with a buffer protective sleeve at the end of the plug, effectively protects the wire and avoids the risk of wire breakage.4. The use of double-layer shielding wire has excellent noise reduction effect,5. Standard 1/4 (6.35mm), XLR 3-pin female plug, widely used6. Adopting balanced connection method, it can support 48V phantom power supply7. Product use: It is widely used for the connection of various Mixing console, sound cards, microphones, active monitor speakers and other equipment. When using microphones, it can be compatible with 48V phantom power supply.

Read more less

1. Gold-plated joint, good contact performance, antioxidant2. The shell is made of metal, which is sturdy and durable, effectively resistant to interference and noise3. Soft PVC wire, with a buffer protective sleeve at the end of the plug, effectively protects the wire and avoids the risk of wire breakage.4. The use of double-layer shielding wire has excellent noise reduction effect,5. Standard 1/4 (6.35mm), XLR 3-pin female plug, widely used6. Adopting balanced connection method, it can support 48V phantom power supply7. Product use: It is widely used for the connection of various Mixing console, sound cards, microphones, active monitor speakers and other equipment. When using microphones, it can be compatible with 48V phantom power supply.

Read more less

1. Gold-plated joint, good contact performance, antioxidant2. The shell is made of metal, which is sturdy and durable, effectively resistant to interference and noise3. Soft PVC wire, with a buffer protective sleeve at the end of the plug, effectively protects the wire and avoids the risk of wire breakage.4. The use of double-layer shielding wire has excellent noise reduction effect,5. Standard 1/4 (6.35mm), XLR 3-pin female plug, widely used6. Adopting balanced connection method, it can support 48V phantom power supply7. Product use: It is widely used for the connection of various Mixing console, sound cards, microphones, active monitor speakers and other equipment. When using microphones, it can be compatible with 48V phantom power supply.

Read more less

1. Connection method: Parallel connection method, where the RCA interface signal end is connected in parallel to No. 2 on the XLR end, and the RCA shielding wire is connected to No. 1 and No. 3 on the XLR end.2. Usage: It can convert the XLR output interface of the audio player to two RCA male interfaces, and output two mono audio signals at the same time. It can be connected to the power amplifier input interface or the Mixing console input interface.3. OFC oxygen free copper conductor provides near zero loss sound quality transmission; Double layer shielding with aluminum foil and copper wire effectively reduces interference and isolates excess noise; Increase frequency through polyethylene insulation to provide high-definition sound quality.4. Adopting a metal shell and gold plated RCA plug; The detachable X LR Canon head is a soft PVC sheath with an outer diameter of 4.0mm, and the outer layer is protected by a woven mesh.5. It is suitable for Mixing console, mixer, power amplifier, active speaker, microphone and other equipment.6. This adapter cable converts the audio output from the XLR end to dual RCA output. It is not possible to combine dual RCA audio signals into XLR audio signals. Please pay attention to the direction of use.

Read more less

1. Gold-plated joint, good contact performance, antioxidant2. The shell is made of metal, which is sturdy and durable, effectively resistant to interference and noise3. Soft PVC wire, with a buffer protective sleeve at the end of the plug, effectively protects the wire and avoids the risk of wire breakage.4. The use of double-layer shielding wire has excellent noise reduction effect,5. Standard 1/4 (6.35mm), XLR 3-pin female plug, widely used6. Adopting balanced connection method, it can support 48V phantom power supply7. Product use: It is widely used for the connection of various Mixing console, sound cards, microphones, active monitor speakers and other equipment. When using microphones, it can be compatible with 48V phantom power supply.

Read more less

1. This is a adapter cable for microphone and Mixing console. It is suitable for connecting 3.5mm male connector to Canon female connector to facilitate interface conversion between Mixing console and microphone.2. Adopts zinc alloy casting shell, it is sturdy and durable, with shielding effect, which can effectively reduce the impact of external interference on signal transmission.3. The gold-plated plug has excellent performance, large contact area, good conductivity, and is not easily oxidized, ensuring the stability and reliability of signal transmission.4. The wire is made of woven mesh wire and oxygen free copper conductor, which has excellent tensile strength and wear resistance, stable transmission performance, and ensures clarity and reproducibility of sound quality5. It is suitable for audio transmission in various occasions, such as Mixing console, microphone, audio system, etc.NOTE: it is not compatible with devices that use phantom power.

Read more less

1. Professional series XLR plugs, designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console. Give you the perfect sound quality!2. Excellent sound: 22 AWG 4N Oxygen free copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.3. Professional quality: 24k gold-plated connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer; The right size, they always fit correctly, never too tight or too loose.4. Durabilty: The wire is flexible and strong toughness, environmentally friendly PVC jacket, and premium metal housing and durable, with a much longer service life.5. Usage: XLR splitter cable compatible with equipments with 3 pin XLR connectors such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier.NOTE: it is not compatible with devices that use phantom power.

Read more less

1. Professional series XLR plugs, designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console. Give you the perfect sound quality!2. Excellent sound: 22 AWG 4N Oxygen free copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.3. Professional quality: 24k gold-plated connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer; The right size, they always fit correctly, never too tight or too loose.4. Durabilty: The wire is flexible and strong toughness, environmentally friendly PVC jacket, and premium metal housing and durable, with a much longer service life.5. Usage: XLR splitter cable compatible with equipments with 3 pin XLR connectors such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier.NOTE: it is not compatible with devices that use phantom power.

Read more less

1. Gold-plated joint, good contact performance, antioxidant2. The shell is made of metal, which is sturdy and durable, effectively resistant to interference and noise3. Soft PVC wire, with a buffer protective sleeve at the end of the plug, effectively protects the wire and avoids the risk of wire breakage.4. The use of double-layer shielding wire has excellent noise reduction effect,5. Standard 1/4 (6.35mm), XLR 3-pin female plug, widely used6. Adopting balanced connection method, it can support 48V phantom power supply7. Product use: It is widely used for the connection of various Mixing console, sound cards, microphones, active monitor speakers and other equipment. When using microphones, it can be compatible with 48V phantom power supply.

Read more less

1. HIFI power cord, work with power filter, turntable, amplifier, CD player, DAC and any hifi components.2. 12AWG power cable, 100% mylar foil shield for outstanding rejection of EMI and RFI.3. Audiophile power cable, greatly reduces noise and enhances the entire audio system with wider dynamics.4. Super pure copper multi conductors made, perfect replacement for old, unreliable power cables.5. Voltage: 125V6. Current: 15ANote: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Read more less

1. Material: ABS, stainless steel/aluminum alloy2. Function: mini, integrated tripod, detachable bluetooth remote control, multi-functional live broadcast/camera phone holder3. Remote control battery: CR1632 x 1 (battery included in delivery)4. Embedded Bluetooth remote control, ten meters long distance control5. Support horizontal and vertical screen use6. A variety of camera modes, suitable for different scenes7. The bottom of the tripod is designed with a silicone pad, which is stable and non-slip8. Small size, easy to carry9. Stretch length: 15.2-73 cm10. Product net weight: aluminum alloy: 122 grams, stainless steel: 133 grams11. Note: Only the bracket will be shipped, nothing else!

Read more less

1. HIFI power cord, work with power filter, turntable, amplifier, CD player, DAC and any hifi components.2. 12AWG power cable, 100% mylar foil shield for outstanding rejection of EMI and RFI.3. Audiophile power cable, greatly reduces noise and enhances the entire audio system with wider dynamics.4. Super pure copper multi conductors made, perfect replacement for old, unreliable power cables.5. Voltage: 125V6. Current: 15ANote: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Read more less

1. Connection method: Parallel connection method, where the RCA interface signal end is connected in parallel to No. 2 on the XLR end, and the RCA shielding wire is connected to No. 1 and No. 3 on the XLR end.2. Usage: It can convert the XLR output interface of the audio player to two RCA male interfaces, and output two mono audio signals at the same time. It can be connected to the power amplifier input interface or the Mixing console input interface.3. OFC oxygen free copper conductor provides near zero loss sound quality transmission; Double layer shielding with aluminum foil and copper wire effectively reduces interference and isolates excess noise; Increase frequency through polyethylene insulation to provide high-definition sound quality.4. Adopting a metal shell and gold plated RCA plug; The detachable X LR Canon head is a soft PVC sheath with an outer diameter of 4.0mm, and the outer layer is protected by a woven mesh.5. It is suitable for Mixing console, mixer, power amplifier, active speaker, microphone and other equipment.6. This adapter cable converts the audio output from the XLR end to dual RCA output. It is not possible to combine dual RCA audio signals into XLR audio signals. Please pay attention to the direction of use.

Read more less

1. Connection method: Parallel connection method, where the RCA interface signal end is connected in parallel to No. 2 on the XLR end, and the RCA shielding wire is connected to No. 1 and No. 3 on the XLR end.2. Usage: It can convert the XLR output interface of the audio player to two RCA male interfaces, and output two mono audio signals at the same time. It can be connected to the power amplifier input interface or the Mixing console input interface.3. OFC oxygen free copper conductor provides near zero loss sound quality transmission; Double layer shielding with aluminum foil and copper wire effectively reduces interference and isolates excess noise; Increase frequency through polyethylene insulation to provide high-definition sound quality.4. Adopting a metal shell and gold plated RCA plug; The detachable X LR Canon head is a soft PVC sheath with an outer diameter of 4.0mm, and the outer layer is protected by a woven mesh.5. It is suitable for Mixing console, mixer, power amplifier, active speaker, microphone and other equipment.6. This adapter cable converts the audio output from the XLR end to dual RCA output. It is not possible to combine dual RCA audio signals into XLR audio signals. Please pay attention to the direction of use.

Read more less

1. Balanced male XLR to 1/4 adapter connects an XLR cable to a 1/4 inch TRS jack2. Pro-grade performance delivers pristine sound3. It adopts a metal shell and is treated with nickel plating, which is sturdy and durable.4. The metal shell can effectively shield external signal interference5. It is suitable for interface switching of microphone, Mixing console, Headphone amplifier, power amplifier, sound card, Electronic keyboard, Electric guitar, Electronic drum and other equipment

Read more less

1. Balanced male XLR to 1/4 adapter connects an XLR cable to a 1/4 inch TRS jack2. Pro-grade performance delivers pristine sound3. It adopts a metal shell and is fixed with screws.4. The plug is treated with nickel plating, which has good contact performance and is not easy to oxidize.5. It is applicable to the conversion of Mixing console, microphone, Electric guitar and other interfaces.

Read more less

1. Professional series XLR plugs, designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console. Give you the perfect sound quality!2. Excellent sound: 22 AWG 4N Oxygen free copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.3. Professional quality: 24k gold-plated connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer; The right size, they always fit correctly, never too tight or too loose.4. Durabilty: The wire is flexible and strong toughness, environmentally friendly PVC jacket, and premium metal housing and durable, with a much longer service life.5. Usage: XLR splitter cable compatible with equipments with 3 pin XLR connectors such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier.NOTE: it is not compatible with devices that use phantom power.

Read more less

1. This XLR female to TRS male adatper is make a XLR Male Plug to a balanced 6.35mm input2. Pro-grade performance delivers pristine sound3. It adopts a metal shell and is treated with nickel plating, which is sturdy and durable.4. The metal shell can effectively shield external signal interference5. It is suitable for interface switching of microphone, Mixing console, Headphone amplifier, power amplifier, sound card, Electronic keyboard, Electric guitar, Electronic drum and other equipment

Read more less

1. Heavy Duty Metal Connectors: Right angle 1/4 inch TS guitar wire conductors are made of AWG22 OFC, providing low attenuation during long distance transmission. Gold-plated plugs resist oxidation and provide better conductivity.2. Braided Nylon Insulated Sheath: Our 10ft instrument cable adopts red+yellowbraided nylon sheath, which is better than pvc to avoid abrasion, ensures safe use and solves the problem of noise electromagnetic interference. High tensile strength, easy to fold for storage3. Strong Compatibility: 1/4 inch (6.35mm) TS plug can be inserted into audio equipment with 6.35mm diameter interface, suitable for electric guitar, electric bass, electronic organ, mixer, power amplifier, effector, decoder , equalizers and other electronic audio equipment4. Good Performance: Our guitar instrument cable has double shielding to reduce hum and noise, providing high stable performance and HIFI original sound when performing on stage or bar. Both right-angle and right-angle plugs can be inserted into the guitar, you can choose it according to your equipment5. Packaging size: 18x26x2cm6. Weight: 175g

Read more less

1. HIFI power cord, work with power filter, turntable, amplifier, CD player, DAC and any hifi components.2. 12AWG power cable, 100% mylar foil shield for outstanding rejection of EMI and RFI.3. Audiophile power cable, greatly reduces noise and enhances the entire audio system with wider dynamics.4. Super pure copper multi conductors made, perfect replacement for old, unreliable power cables.5. Voltage: 125V6. Current: 15ANote: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Read more less

1. Material: ABS, stainless steel/aluminum alloy2. Function: mini, integrated tripod, detachable bluetooth remote control, multi-functional live broadcast/camera phone holder3. Remote control battery: CR1632 x 1 (battery included in delivery)4. Embedded Bluetooth remote control, ten meters long distance control5. Support horizontal and vertical screen use6. A variety of camera modes, suitable for different scenes7. The bottom of the tripod is designed with a silicone pad, which is stable and non-slip8. Small size, easy to carry9. Stretch length: 15.2-73 cm10. Product net weight: aluminum alloy: 122 grams, stainless steel: 133 grams11. Note: Only the bracket will be shipped, nothing else!

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Professional UHF microphone system delivers clear amd lound audio signal and is much more stable than the VHF, 4-channel wireless microphone receiver, fixed frequency,superior anti-interference ability. Upgraded wireless signal acquisition, 4 antennas can be installed on the back of the receiver to enhance the received signal, ensuring high frequency stability and accuracy2. The receiver has four XLR balanced outputs and one 1/4 inch (6.35mm) mix output jack that can be externally connected to a variety of external devices such as amplifiers, mixers, stereos, and more professional wireless microphone system.Better sound quality improvements, separate volume control, and adjustable sound output as needed, making it the perfect choice for any outdoor event such as parties, weddings and presentations.With an operating range of up to 200 Ft3. Both the receiver and the microphone have a high-end LCD display, and the battery usage and working status are clear at a glance.Metal receiver and Bodypackmicrophone, Provide a better experience4. Stable transmission technology, FCC certification and comply with new FCC rules.the fixed frequency points are: Group A: 504.50MHz, 514.60MHz, 521.90MHz, 538.70MHz; Group B: 553.70MHz, 577.10MHz, 586.70MHz, 593.20MHz.Specifications:1. Material: Metal+ABS2. Frequency: 504.5-593.2Mhz fixed frequency3. Receiving distance: 50 meters

Read more less

1. Upgrade the strap-type neck hanger bracket, which is more suitable for a wider range of applications, and it will not shake during sports2. Curved extension design, you can watch the phone screen in real time3. According to the streamlined design of the neck, it is outsourced with silicone, which fits the curvature of the neck and does not strangle the neck4. Closed-loop fast lock design, easy to install and disassemble5. Both horizontal and vertical shooting are acceptable (vertical shooting needs to be equipped with a vertical shooting adapter bracket)6. Free your hands to meet the needs of various shooting scenes7. Fixed belt adjustment range: 73CM-132CM8. Using high-quality PC material, the product is strong and durable/good toughness

Read more less

1. The selfie ring light is equipped with a 100mAh battery. After being fully charged, the continuous working time is 2 hours. Just use the included USB data cable to connect to the power supply, and it will be infinitely brighter.2. The large opening clip design of this selfie light is very suitable for mobile phones and laptops, and the clip thickness is 1.5cm3. Large diameter, will not block the front and rear cameras4. 3 levels of light brightness adjustment, free adjustment to create the photo or video effect you want.5. An artifact of fill light that can be carried with you anytime, anywhere. It's not bulky, and the selfie light won't take up much space in your handbag.Parameter:1. Material: PC+ABS2. Battery capacity: 100mAh3. Charging method: USB charging4. Color temperature: warm white5. Product size: 8.5cm6. Net weight: 63g

Read more less

1. This machine realizes the function of wireless microphone through the principle of FM radio transmission and reception. That is to use the "transmitter" as a transmitting station to transmit a frequency point, and use the "speaker" as a receiver to receive the frequency point sent by the transmitter, so that the function of wireless shouting can be realized.2. This machine has a built-in rechargeable lithium battery, which can be adapted to various mobile phone charging heads for charging.3. The red light is always on when the transmitter is charging, and the red light is off when it is fully charged.4. Input: DC5.0V, 1A5. Channel: 3Operating procedures:1. Connect the plug of the wired microphone to the transmitter together2. Turn on both the transmitter and amplifier3. Press the M button of the loudspeaker to enter the radio mode (the FM letter appears on the display), and then press the next button for 3 seconds to start searching.4. When the radio station is searched, click the button to see the display screen and find one of the three frequency points of 76.1/100.0/107.9, then you can call wirelessly

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Eliminate Interference: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording. 2. Flexiblity & Convenience: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go. 3. Easy to Use: Only take minutes to unfold this recording sound shield, which can be fixed on a desktop or tabletop for live broadcast, and also can be mounted to a microphone stand for your professional recording. 4. Versatility: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. 5. Design Style: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield features an acoustic foam front and a vented metal back plate. The foldable design makes it convenient for you to take it to any place. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

Features1. Reduces Noise Interference: The noise isolation stand has three layers that work in tandem to reduce noise while recording. It particularly relies on reflectors with a triangular high density thickened sponge insulator material which reduces the propagation of interference sound waves and creates good recording conditions that result in sublime recordings. 2. Flexibility And Convenience: There is lots of flexibility working with the microphone isolation shield with a stand as you can choose to use the 3-panel design foldable end panels. It is easy to adjust the arch design, enables angle adjustments for optimal sound insulation and meets the recording needs of the environment hence ensures only the high quality recordings. 3. Super Noise Reduction Design: This one is designed to block all sound interpretations with its compact design.It is a full package design, with a foldable top to efficiently cancel out noise interference from the environment for a noiseless,multi-layer noise cancellation structure. It reduces noise on the back and side to ensure cleaner and clearer recordings.The reflection area and the absorption area reduce noise generated by the external environments. 4. Easy to Use: The microphone isolation cover is designed for easy usage as it can be disassembled separately and installed according to the recording environment.You can fox it on a desktop or microphone stand. It is suitable for use with multiple stands making it suitable for your current needs.You can adjust the height of the recording shield to fit the preferences of the personal preferences. This one are suitable for professional or vocal recordings and podcast recording studios. 5. High-quality Material: Constructed from high-quality material for sturdiness and long-lasting performance. They can be used with multiple stands or microphones, you can use them on a flat surface and can be fitted on countertops and desktops. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

Features1. 24 bit/192 kHz Professional Audio Quality: Audio interface, with all connection interfaces for microphone, electric guitar, bass, etc. This includes a +48 volt phantom power supply for condenser microphones,delivers studio-grade 24-bit/192 kHz audio resolution for pristine recording every time.Whether you are a singer, songwriter, producer on the go, or need to accompany during recording, the ultra-reliable E22 audio interface will help you shine in the digital field 2. Simple, Plug and Play: USB audio interface for Windows or Mac driver use generic Windows driver. No proprietary driver to download. It has left and right channel input, can be connected to microphones and instruments at the same time for music production, and can be played on the computer at the same time.So you can be going in your home project studio just a few minutes. 3. Compatible with Popular Recording Software: Whether you are a Podcaster or Beat Maker, it will not disappoint. It can ideally match Pro Tools/Ableton Live Lite/Reaper/Ableton and Other DAW Recording Software. NO DAW Software included which means you have flexible choice for you music production. 4. Ideal For Beats: The sound card is small and easy to carry, so you can prepare for various recording and production scenes even on the go. In touring performances, at home, on stage or in rehearsal venues, the sound card provides you with new freedom in recording, editing and mixing, aany audio you record is at studio quality, meaning you will not have to go to a studio to re-record it later. 5. Power Selector: Sound card has diversified power supply. When connected to the tablet, it provides a 5V DC port for power supply. You can insert a standard USB power adapter or an external USB battery to ensure power stability.Specifications1. Connector: Audio Sound Card Adapter 2. Application: Audio equipment, 2 in 2 out, with LOOP BACK function 3. Material: Metal+ABS 4. Features: Portable 5. Application: Computer and mobile phone 6. Function: Studio recording 7. Resolution: 192Khz-24Bit 8. Frequency range: 60Hz-15KHz

Read more less

1. Foldable body, compact and portable. 2. AR sensor type, power high-density motor, anti-vibration sensor, effectively slow down the shooting shake. 3. Detachable Bluetooth remote control for remote control. 4. Invisible tripod, convenient for live broadcast, selfie and video. 5. Parameters: - Material: aluminum alloy + ABS - Bluetooth version: JL+5.0, distance: 10M - Charging current: 0.45MA - Gimbal battery: 450MAH, duration: 2H (stabilizer) - Telescopic rod: 190CM-750CM - Handle bracket: handle triangle support - Support clip: 65-90MM - Support system: Android 4.3/iOS 5.1

Read more less

1. Suitable for microhones: The microhone windshield is suitable for most USB microhones, condenser microhones with a jacket diameter between 40-70mm. Comes with a holder for different size microhones. 2. Noise-Canceling: Professional o filter efficiently reduce the losive, wind interference, saliva sraying and reserve you a rofessional clean voice and bright clear recording. 3. 5-sided Noise Reduction + 1-side Double Layered Filters: microhone foam screen o filter adots a 5-sided seal design to effectively reduce noise in different directions. The oening 1-side Double Layered Screen Pop Filters can revent the divergent sound from during the recording rocess, the recetion is more secific, and the recording is clearer and true and rotect your microhone from the corrosion of saliva. 4. Light and Convenient: Mic O-type filters have good noise reduction and acoustic noise reduction strength, it is not only suitable for ersonal live recording but also for rofessional recording studio, radio studio, outdoor erformance, etc. 5. Wide alication: Light ortable design, easy installation; It can be easily mounted on various desktos stand, small triods, cantilever arms and floor stands. 6. Material: Plastic+foam+metal 7. Function: Sound insulation 8. Features: Noise reduction, anti-knock sound

Read more less

1. Durable Material: Using metal tube, strong and durable, strong bearing capacity 2. Height Adjustable: This mic stand is made of metal tubing with tripod stand base, which makes it extremely sturdy and super stable. The height of the microphone stand is adjustable, and the height range is from 50 to 187cm. 3. Portable Design: The detachable design makes the stand space-saving and more portable. It is easy to carry and install which provides great convenience for various types of activities like the stage, studio, concerts, outdoor performances, and more. 4. With hard and solid iron of this tripod, it is proved to be reinforced, stable and durable. It is a heavy-duty type with skid resistance characteristic. The height of the tripod is adjustable. 5. The tripod base can provide better stability and therefore wona??t cause any burdens even if you place much heavier microphone and mic isolation shield above it. The angle of tripod can be adjusted through the knob.

Read more less

Features1. 24 bit/192 kHz Professional Audio Quality: E22 audio interface, with all connection interfaces for microphone, electric guitar, bass, etc. This includes a +48 volt phantom power supply for condenser microphones,delivers studio-grade 24-bit/192 kHz audio resolution for pristine recording every time.Whether you are a singer, songwriter, producer on the go, or need to accompany during recording, the ultra-reliable E22 audio interface will help you shine in the digital field 2. Simple, Plug and Play: XTUGA E22 USB audio interface for Windows or Mac driver use generic Windows driver. No proprietary driver to download.It has left and right channel input, can be connected to microphones and instruments at the same time for music production, and can be played on the computer at the same time.So you can be going in your home project studio just a few minutes. 3. Compatible with Popular Recording Software: Whether you are a Podcaster or Beat Maker, it will not disappoint. It can ideal match Pro Tools/Ableton Live Lite/Reaper/Ableton and Other DAW Recording Software.NO DAW Software included which means you have flexible choice for you music production. 4. Ideal For Beats: The E22 sound card is small and easy to carry, so you can prepare for various recording and production scenes even on the go. In touring performances, at home, on stage or in rehearsal venues, the E22 sound card provides you with new freedom in recording, editing and mixing, aany audio you record is at studio quality, meaning you will not have to go to a studio to re-record it later. 5. Power Selector: E22 Sound card has diversified power supply. When connected to the tablet, it provides a 5V DC port for power supply. You can insert a standard USB power adapter or an external USB battery to ensure power stability.Specifications1. Connector: Audio Sound Card Adapter 2. Application: Audio equipment, 2 in 2 out 3. Material: Metal+ABS 4. Features: Portable 5. Application: Computer and mobile phone 6. Function: Studio recording 7. Resolution: 192Khz-24Bit

Read more less

1. Using iFLYTEK AI chip algorithm, true 360-degree face recognition and automatic tracking. 2. The mobile phone stand can be used for 360-degree horizontal and vertical shooting, and 180-degree front and rear shooting to meet different shooting needs. 3. Built-in AI strong core to accurately recognize gestures. 4. It can be used after turning on the phone, no need to connect Bluetooth and download APP, which is convenient and fast. 5. Parameters: - Material: ABS - Best distance: 1-3M - Charging interface: USB-Type-C - Charging current: DC5V/1A - Battery capacity: 1200MAH - Tracking mode: face recognition - Support clip: 40-80MM - Gesture operation: ok gesture: start, palm: pause - Working hours: 5H (stabilizer)

Read more less

1. Flexible and easy to carry. 2. Made of aviation nano-alloy, strong load-bearing, sturdy and durable. 3. The detachable gimbal is also a camera stand. 4. 1.8 meters super wide angle, shooting is no longer restricted. 5. The 360-degree rotating head is smooth and smooth, and it is easy to take a panoramic view. 6. Parameters: - Stretch length: 29.5cm-1.8m - Voltage: 4.2V - Battery capacity: 55mAh - Bluetooth version: 5.2

Read more less

1. The angle can be adjusted at will to meet different angle requirements. 2. The triangular desktop bracket design occupies a small area. 3. The ring fill light has three adjustable light colors, warm light/warm white light/cool white light 4. The fill light uses 120 pieces of 12W 90Ra high-resolution LED beads, which are bright and not dazzling. 5. The 360-degree rotating head can be adjusted in all directions up, down, left, and right. 6. Multiple cooling grooves are designed on the back, which can dissipate heat quickly and prolong the service life.

Read more less

1. Material: aluminum alloy + ABS plastic2. Adaptable system: Android, IOS3. Remote control power supply: button cell battery included4. Applicable cell phone size: 3-7 inch5. Clamping distance: up to 86mm6. Length: 29-160cm adjustableFeatures:1. The vice-grip design can be balanced according to the weight of the phone and the verticality of the counterweight bar.2. Head balancing handle, the picture will not shake.3. 9-stage telescopic, height adjustable, wider viewfinder.4. Universal rotating head, flexible angle, each joint can be turned, full coverage of the angle5. Duplicate three-legged support, with silicone anti-slip pads, three-axis mechanics, stable and not shaky6. Increase the chassis force area, increase the moment of physics to enhance the stability of the landing solid, not shaking, stronger load bearing7. Circular multi-function remote control, Bluetooth connection, easy to realize 10 meters remote selfie, embedded design is not easy to lose8. One-piece design, smaller volume, storage does not take up space, easy to carry9. Standard 1/4 interface, adaptable to cameras, fill light, expansion bracket and other equipment10. The cell phone clip contains silicone anti-slip pads to prevent the phone from slipping, will not scratch the phone

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

Features: 1.This wireless ear-monitor System is used in stage performance and sound broadcast which can replace traditional complex sound monitoring equipment, achieve admirable listening effect.2.With using the latest high frequency transmission and audio signal dynamic processing technology, also improve the signal to-noise ratio of the dynamic range so that the system has the best anti-interference to show the perfect original sound again.3. Among the band of 32MHZ, you can preset 40 frequencies which can be arbitrary switching.4. With using advanced circuit design, clear the receiving blind angle to make the system's receiving signal steady. The system is strong resistance to fall because of the housing is made by tough metal material. It is the good choice of stage performance monitor product.Metal Transmitter:1. Case specification: Standard 1U 2. Case material: Metal panel 3. Oscillation Mode: PLL synthesized 4. Frequency stability: 0.005% 5. Frequency range: 572-603MHz 6. Frequency interval:32MHz 7. Preset Channel:40 channels separately set 4 groups 8. Operate mode: Manual adjust.9. Frequency response: 50Hz~15KHz+/-3dB10. Transmit output power: 100mW(50 ohms)11. Power switch control12. Strong signal, UHF frequency13. Digital tone key locking technology to avoid possible interferenceMetal Bodypack Receiver:1. Oscillation mode: PLL Synthesized2. Frequency range: 572-599MHz3. Preset channel: 40 channels separately set 4 groups4. Operate mode: Manual adjust5. Receiving mode: Single tuning.6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB7. Receiving range: More than 250FT8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB9. LCD Display shows clear working status10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack11. Power supply: 2 x AA batteries (not included)12. Size: 8.0 x 6.5cm

Read more less

1. Oscillation mode: PLL Synthesized 2. Frequency range: 572-603MHz 3. Preset channel: 40 channels separately set 4 groups 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Sensitivity: Deviation 25 khz, with conecting 7dBuV,S/N greater than 78dB 7. Receiving range: More than 250FT 8. Comprehensive Reaponse: 50Hz~15KHz+/-3dB 9. LCD Display shows clear working status 10. Low battery remind of bodypack receiversEarphone output: 3.5mm jack 11. Power supply: 2 x AA batteries (not included) 12. Size: 8.0 x 6.5cm

Read more less