3D Printer Machines

1. No need to wait for one imaging, bright colors, long-term preservation 2. Small size, easy to carry 3. Adhesive design, easy to open, paste firmly 4. Photo paper can be cut freely and is easy to use. 5. Size: 50x76mm

Read more less

1. Support rod kit for 3D printer with aluminum profile structure. 2. Used to enhance the stability of the Z axis and improve the printing effect. 3. Compatible with Creality Ender-3 / Ender-3S / Ender-3 Pro / Ender-3 v2 or other similar structure 3d printers, the print size is 220x220x250mm. 4. The length of a single tie rod is 36.5cm, which is convenient to install and has a more stable structure. 5. Made of high-quality aluminum alloy material, strong and durable. 6. Product size: 56x63x471mm

Read more less

1. With special power chip, support 24V power input 2. The circuit board is optimized by circuit, effectively solve the heating problem 3. Can work with E/Z/Y/X a-xis motor 4. With USB interface, easy to operate 5. For Ender-3 /3 Pro / 3V2 / 5 / 5 Pro Note: Ender-3 / Ender-3 Pro use the same main board but different firmware

Read more less

1. Material: aluminum, stainless steel and brass 2. Installation type: external thread connection 3. Nozzle size: 0.4mm 4. Length of throat: 30mm 5. Filament: 1.75 mm 6. The white wire is the temperature thermistor, the red wire is the heating tube 24V 40W 7. Nozzle tip, aluminum heating block, throat (built-in Teflon) 8. Aluminum block size: 20x20x10mm

Read more less

1. Durable and high temperature resistant. 2. The high-speed fan has good ventilation and heat dissipation effect. 3. Seamless nozzle and pipe connection, no leakage, no blockage. 4. Material: PC 5. Output voltage: 24V 6. Size: 52x63x72mm

Read more less

1. High hardness, durable and easy to clean 2. High viscosity, strong adsorption and no edge warping 3. Easy to remove the model manually, or easily remove the model with the help of the scraper of a large model 4. Flat, fast and uniform heating 5. The special coating is an inorganic coating with a hardness of 8 Mohs and can work at a temperature of 400 degrees Celsius. 6. Size: 235x235x3mm 7. Material: tempered glass 8. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Flexible and detachable, firmly adsorb the magnet 2. The magnetic base can withstand a high temperature of 140?°C without losing its magnetism 3. Fast heater performance, reducing waiting time after printing 4. PEI powder coating, high temperature resistant and not easy to deform 5. Easy to use, bend the printing plate slightly, then remove the print after cooling 6. Size: 235x235mm 7. Suitable for Creality 3D printer Ender-3 / 3s / 3 Pro / 5/5 Pro / CR20 / CR20 Pro

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Folding storage, easy to carry, multi-faceted observation, reserved tool bag 2. Maintain a constant temperature printing environment, reduce the impact of low temperature weather on printed products, and improve printing stability 3. Dustproof and noise reduction, pure aluminum film and flame retardant appearance materials are used inside 4. Fireproof, will not ignite the shell by itself, and will not spread 5. Equipped with iron pipes, stable structure and spacious space 6. Product size: small size: 72x60x48cm, medium size: 72x76x65cm, large size: 70x75x90cm 7. The trumpet is suitable for Enter-3 series, CP-01, Enter-2, CR-100 Medium size is suitable for Enter-3 series, Enter-5, Enter-5S, Enter-5 Pro, CP-01, CR-5 series, Enter-6, CR-10, CR-10S, CR-10S Pro, CR- 10 mini, CR20 series, CR-X, CR-2020, CR-3040, CR-10 V2 Large size is suitable for Enter-3 series, Enter-5, CP-01, CR-10 V2, CR20, CR-5, CR-5S, CR-X, CR-2020, CT-228, Enter-1, Enter- 5S, CR-10, CR-10S, CR-100

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy 4. For 1.75mm filament 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. Used in Creality 3D Ender-3 series, Ender series, CR-10 series, CR100 3D printer

Read more less

1. Not easy to corrode in the air. 2. The hole size is accurate and the installation is convenient. 3. High temperature performance is stable and durable. 4. The leveling is simple, compact and does not take up space. 5. Material: aluminum alloy 6. Product size: 60x60x9mm 7. Suitable for FDM models

Read more less

1. Extrusion gears are closely matched with U-shaped bearings 2. The extrusion force is uniform to avoid slippage and grinding 3. All metal aluminum alloy, flexible adjustment of extruder gear pressure 4. Compatible with a variety of consumables, can print soft plastic consumables 5. DIY aluminum block, easy to assemble 6. Product size: 16x89x162mm 7. For Creality 3D Ender-3 series, CR-10 series

Read more less

1. Two-in-one proximal extrusion kit 2. Metal shell, strong and durable 3. Integrated structure, simple wiring, easy to disassemble and replace 4. Compatible with a variety of consumables, can print soft plastic consumables 5. Direct extrusion, more accurate feeding 6. Output voltage: 24V 7. Nozzle diameter: 0.4mm 8. Rated voltage: 150V-230V, 50-60Hz 9. Product size: 76x96x125mm 10. Used for Creality 3D Ender-3, Ender-3S, Ender-3Pro

Read more less

1. This is a shaft- reversed stepper motor that is frequently used in CNC machines and 3D printers. 2. The Advantages of step motors are low cost, high reliability, high torque at low speeds and a simple, rugged construction that operates in almost any environment. 3. They are typically digitally controlled as part of an open loop system for use in holding or positioning applications. 4. The Nema 17 is larger and generally heavier than for example a Nema 14, but this also means it has more room to put a higher torque.

Read more less

1. LCD-Panel-adapter-FD is an adapter for Adruino DUE and Ramps-FD, which are always combined to work as a 3D printer control board. 2. As the operating voltage of the Arduino DUE chip is 3.3v, while the LCD display works best at 5V, we add a signal amplification circuit in chip of the adapter, so that the DUE board can better drive and isolate the LCD display. 3. LCD-Panel-adapter-FD is considered to be one of the best LCD adapters for DUE+ Ramps-FD on the market.

Read more less

1. The firmware is the prevalent Marlin, which is known for its stability, usability, and high-performance. 2. Adopt ATmega2560 as the main control chip, coupled with the high-performance USB serial converter FT232RQ. 3. The power pack: operating voltage is 12V-24V; double power supply design feeds for heatbed and logical part separately. The current is 12A for heatbed and 5A for other parts. The cooling fan can support 12V. 4. The main circuit adopts SMD fuse tube, the diode added to the power port can provide reverse protection to the whole circuit, in addition, the 5V USB is USB port protected with 500mA Recoverable fuse. 5??? 3 12v fan output and one PWM output for LED or other lighting equipment. 6. 3 55Amp MOSFET (with LED indicator, the actual output is restricted by the PCB board and the connector), all 3 MOSFET are equipped with heat sink to ensure sufficient heat dissipation and stable operation.

Read more less

1. Please use a good power supply and thick copper wire to connect the heat bed. 2. You need basic soldering skills to solder the power wire.

Read more less

1. 42mm high quality stepper motor with larger torque and less heat build up. 2. Special ceramic insulation cotton ensures the stability of heating; electricity-saving. 3. Direct transmission, without the heavy gears, compact size and weight. 4. Material of Print: 1.75mm or 3mm PLA / ABS materials.

Read more less

1. This is an modified MK8 extruder, which features outstanding quality and ensures better performance for 3D printers. 2. The heat-resisting PTFE tube inside the barrel ensures fluent feeding and helps avoid blocking problem thanks to its self-lubricity. 3. The brass nozzle ensures accurate extrusion, realizing excellent printing effect. 4. Direct transmission, without the heavy gears, compact size and weight. 4. Precise brass nozzle ensures accurate extrusion, realizing excellent printing effect.

Read more less

1. This is an MK8 Extruder Aluminum feeder Kit for 1.75mm /3mm filament. (3mm is only available for short distance ). 2. This kit is also available for both left and right hand direction, short-distance and long distance(with two push-in fittings), which gives you 6 options in total, please choose according to your requirement. 3. Please note that stepper motor and cooling system is not included.

Read more less

1. These extruder nozzle drill cleaners are powerful tools that any 3D printer owner must have. 2. The drills are made of Tungsten steel, hard and thin enough to get into the nozzle and extract the blocked filament. 3. There are 4 types of drills of 0.3mm, 0.35mm, 0.4mm and 0.5mm suitable for nozzles of 0.3mm to 0.5mm. 4. Please note that the color of the rubber band on the drill cleaner is random. 5. With these precision drill bits, you will certainly extend the life of your nozzle keep producing better models.

Read more less

1) Material: PLA which is crisp, hard 2) Working temperature: 1.75mm at 210 degree 3) It is smokeless, smell like baked corn 4) Diameter tolerance: + / - 0.1mm 5) Roundness: + / - 0.02~0.05mm 6) Moisture absorption: average 7) Surface glossiness: good 8) Toughness: good, unbroken when bending 9) Weight: 1.3kg

Read more less

1) Material: PLA which is crisp, hard 2) Working temperature: 1.75mm at 210 degree 3) It is smokeless, smell like baked corn 4) Diameter tolerance: + / - 0.1mm 5) Roundness: + / - 0.02~0.05mm 6) Moisture absorption: average 7) Surface glossiness: good 8) Toughness: good, unbroken when bending 9) Weight: 1.3kg

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. High purity and no doped waste, recycled materials2. The printed product has bright colors, no drawing and no bubbles, and the finished product is smooth and delicate3. The wire diameter tolerance is controlled at +-0.03mm, which is more conducive to the printing effect, and the details determine success or failure4. No warping, no drawing, no plugging, accurate color5. Good tensile strength, ductility, fluidity, low shrinkage, strong toughness, not easy to break6. Good heat melting, the surface becomes more beautiful and smooth after heating7. Printing temperature: 220-230 degrees Celsius8. Wire diameter: 1.75mm9. Hot bed temperature: 70 degrees Celsius10. Net weight: 1.0kg11. Length: 340m12. Bobbin size: diameter 20cm, height 6cm, center hole diameter 6cm

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Material: PLA2. No bubbles, not easy to break3. Sectional shape: round4. Appearance: silky, coiled material5. Purpose: 3D printer/3D printing pen consumables6. Improved smoothness, precision, toughness, and printing effect7. Density: 5008. Net weight: 1kg, gross weight: 1.3kg9. Size: 21x21x7cm, diameter 1.75mm, length: 330m

Read more less

1. Product name: 3D printing pen consumables 2. Specification: 1.75mm 3. PCL printing temperature: 10-100 degrees 4. Purpose: DIY creation, printing and painting 5. Material: PCL

Read more less

1. Product name: 3D printing pen consumables 2. Specification: 1.75mm 3. PCL printing temperature: 10-100 degrees 4. Purpose: DIY creation, printing and painting 5. Material: PCL

Read more less

1. Product name: 3D printing pen consumables 2. Specification: 1.75mm 3. PCL printing temperature: 10-100 degrees 4. Purpose: DIY creation, printing and painting 5. Material: PCL

Read more less